Philippe Causse

Département de génie des systèmes
Expertises :
- Matériaux composites
- Développement et optimisation des procédés de fabrication
- Simulation numérique et fabrication virtuelle
- Caractérisation des matériaux
38th IAHR World Congress : 'Water – Connecting the World"
Publications: article
Publications: conference_item
6th International Conference on Science and Technology of Composite Materials (COMAT)
Publications: conference_item
10th Canadian-International Conference on Composites : Advanced Composites in Addressing Global Challenges of the 21st Century (CANCOM)
Publications: conference_item
13th International Conference on Flow Processing in Composite Materials
Publications: article
Publications: conference_item
18th International Conference on Composites Materials (ICCM)
Publications: conference_item
Proceedings of the American Society for Composites 2011-Twenty-Sixth Technical Conference (2011)
Publications: conference_item
19th International Conference on Composite Materials (ICCM)
Publications: conference_item
14th International Conference on Flow Processing in Composite Materials
Publications: article
Publications: article
Publications: article
Publications: article
Publications: conference_item
20th International Conference on Composite Materials (ICCM)
Publications: article
Publications: article
Publications: conference_itemaff
Publications: article
Publications: article
Publications: article
Publications: article
Publications: article
Publications: article
Publications: article
Publications: conference_item
19th International Conference on Composite Materials (ICCM)
Publications: article
Publications: conference_itemaff
Publications: article
Publications: article
Publications: article
Publications: conference_item
7th International Symposium on Air/Craft Materials (ACMA)
Publications: conference_item
20th European Conference on Composite Materials: Composites Meet Sustainability, ECCM
Publications: article
Publications: article
Publications: conference_itemaff
Publications: article
Publications: article
Cours
GPA772 | Conception de machines | (Automne 2023) |
GPA678 | Méthodes numériques | (Hiver 2023) |
GPA772 | Conception de machines | (Hiver 2023) |
Encadrements
Thèse de doctorat (recherche appliquée)-
En codirection avec : Béguin, Cédric
Development and Application of an Intelligent Sensing and Controlling System Embedded in the Membrane Used in the Flexible Injection Process, par Zelaya Matamoros,Ariana Fabiola.
Automne 2023
-
En codirection avec : Jihui, Wang
Analysis and Development of Injection Processes to Manufacture Large Foam Core Composite Sandwich Structures, par Feng,Yuwei.
Hiver 2024
-
Rapport de stage, par Voyer,Julien.
Automne 2022
-
En codirection avec : Causse, Philippe
Amélioration d'un procédé d'imprégnation VPI pour la fabrication d'un condensateur sec haute tension, par Remy-Lorit,Théo.
Été 2021
Bin Yang, Yixum Sun, François Trochu, Cédric Béguin, Jihui Wang, Philippe Causse. 2023. « Performance evaluation of unidirectional molds used for measuring saturated transverse permeability of engineering textiles ». Composites Part A: Applied Science and Manufacturing. vol. 169
Zaynab Grofti, Bruno Croteau-Labouly, Rachid Boukhili, Philippe Causse, Salim Belouettar, Henri Perrin, François Trochu. 2022. « Simultaneous characterization of preform expansion and permeability in vacuum assisted resin infusion ». Polymer Composites. vol. 43 , nº 6. p. 3560-3573.
Yinxun Sun, Cédric Beguin, Philippe Causse, Brahim Benmokrane, François Trochu. 2022. « Convective heat transfer between a bead packing and its bounding wall: Part I-Theory ». Transport in Porous Media. vol. 143 , nº 2. p. 397-416.
Yixun Sun, Cédric Beguin, Philippe Causse, Brahim Benmokrane, François Trochu. 2022. « Convective heat transfer between a bead packing and its bounding wall: Part II-Numerical analysis and experimental validation ». Transport in Porous Media. vol. 143 , nº 1. p. 1-22.
Yixun Sun, Cédric Béguin, Philippe Causse, Brahim Benmokrane, François Trochu. 2022. « Experimental and numerical investigation of wall temperature in a heated pipe filled with beads ». International Journal of Heat and Mass Transfer. vol. 192
Bin Yang, Wei Huang, Philippe Causse, Cédric Beguin, Jihui Wang, François Trochu. 2022. « On the design of test molds based on unidirectional saturated flows to measure transverse permeability in liquid composite molding ». Polymer Composites. vol. 43 , nº 4. p. 2234-2251.
Igor Belot, Yisun Sun, David Vidal, Martin Votsmeier, Philippe Causse, François Trochu, François Bertrand. 2021. « A 3D additive manufacturing approach for the validation of a numerical wall-scale model of catalytic particulate filters ». Chemical Engineering Journal. vol. 405 18 p.
A. X. H. Yong, A. Aktas, D. May, A. Endruweit, S. Advani, P. Hubert, S. G. Abaimov, D. Abliz, I. Akhatov, M. A. Ali, T. Allen, D. C. Berg, S. Bickerton, C. Brauner, D. Brütsch, B. Caglar, H. Caglar, P. Causse, A. Chiminelli, A. Cohades, S. Comas-Cardona, M. Danzi, J. Dittmann, C. Dransfeld, P. Ermanni, E. Fauster, J. A. Garcia-Manrique, A. George, R. Graupner, V. Grishaev, A. Guilloux, M. Hancioglu, W. Harizi, T. Herman, W. Huang, M. A. Kabachi, A. Keller, K. Kind, M. Laspalas, O. V. Lebedev, M. Lizaranzu, A. C. Long, K. Masania, V. Michaud, P. Middendorf, D. Salvatori, R. Schubnel, N. Sharp, M. Sozer, J. Thomas, F. Trochu, R. Umer, J. Valette, J. H. Wang, B. Willenbacher. 2021. « Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise ». Composites Part A: Applied Science and Manufacturing. vol. 148
A. X. H. Yong, A. Aktas, D. May, A. Endruweit, S. V. Lomov, S. Advani, P. Hubert, S. G. Abaimov, D. Abliz, I. Akhatov, M. A. Ali, S. Allaoui, T. Allen, D. C. Berg, S. Bickerton, B. Caglar, P. Causse, A. Chiminelli, S. Comas-Cardona, M. Danzi, J. Dittmann, C. Dransfeld, P. Ermanni, E. Fauster, A. George, J. Gillibert, Q. Govignon, R. Graupner, V. Grishaev, A. Guilloux, M. A. Kabachi, A. Keller, K. Kind, D. Large, M. Laspalas, O. V. Lebedev, M. Lizaranzu, A. C. Long, C. López, K. Masania, V. Michaud, P. Middendorf, P. Mitschang, S. van Oosterom, R. Schubnel, N. Sharp, P. Sousa, F. Trochu, R. Umer, J. Valette, J. H. Wang. 2021. « Experimental characterisation of textile compaction response: A benchmark exercise ». Composites Part A: Applied Science and Manufacturing. vol. 142
Claudio Di Fratta, Yixum Sun, Philippe Causse, François Trochu. 2020. « A dimensionless characteristic number for process selection and mold design in composites manufacturing: Part I—Theory ». Journal of Composites Science. vol. 4 , nº 1. 16 p.
Claudio Di Fratta, Yixun Sun, Philippe Causse, François Trochu. 2020. « A dimensionless characteristic number for process selection and mold design in composites manufacturing: Part II—Applications ». Journal of Composites Science. vol. 4 , nº 1.
W. Huang, P. Causse, H. Hu, S. Belouettar, F. Trochu. 2020. « Transverse compaction of 2D glass woven fabrics based on material twins – Part I: Geometric analysis ». Composite Structures. vol. 237 10 p.
W. Huang, P. Causse, H. Hu, S. Belouettar, F. Trochu. 2020. « Transverse compaction of 2D glass woven fabrics based on material twins – Part II: Tow and fabric deformations ». Composite Structures. vol. 237 10 p.
Wei Huang, Philippe Causse, Heng Hu, François Trochu. 2020. « Numerical and experimental investigation of saturated transverse permeability of 2D woven glass fabrics based on material twins ». Polymer Composites. vol. 41 , nº 4. 15 p. p. 1341–1355.
Yixun Sun, Philippe Causse, Brahim Benmokrane, François Trochu. 2020. « Permeability measurement of granular porous materials by a modified falling-head method ». Journal of Engineering Mechanics. vol. 146 , nº 9.
W. Huang, P. Causse, V. Brailovski, H. Hu, F. Trochu. 2019. « Reconstruction of mesostructural material twin models of engineering textiles based on Micro-CT Aided Geometric Modeling ». Composites Part A: Applied Science and Manufacturing. vol. 124
Wei Huang, Qun Huang, Yin Liu, Jie Yang, Heng Hu, François Trochu, Philippe Causse. 2019. « A Fourier based reduced model for wrinkling analysis of circular membranes ». Computer Methods in Applied Mechanics and Engineering. vol. 345 p. 1114-1137.
Anna Madra, Philippe Causse, François Trochu, Jérôme Adrien, Eric Maire, Piotr Breitkopf. 2019. « Stochastic characterization of textile reinforcements in composites based on X-ray microtomographic scans ». Composite Structures. vol. 224 11 p.
Philippe Causse, Christophe Ravey, François Trochu. 2018. « Capillary characterization of fibrous reinforcement and optimization of injection strategy in resin transfer molding ». Journal of Composites Science. vol. 2 , nº 2. 15 p.
Beliny Bonnard, Philippe Causse, François Trochu. 2017. « Experimental characterization of the pore size distribution in fibrous reinforcements of composite materials ». Journal of Composite Materials. vol. 51 , nº 27. p. 3807-3818.
Philippe Causse, Ed Ruiz, François Trochu. 2013. « Influence of preforming on the quality of curved composite parts manufactured by flexible injection ». International Journal of Material Forming. vol. 6 , nº 3. p. 341-362.
Philippe Causse, Edu Ruiz, François Trochu. 2012. « Spring-in behavior of curved composites manufactured by Flexible Injection ». Composites Part A: Applied Science and Manufacturing. vol. 43 , nº 11. p. 1901-1913.
Philippe Causse, Edu Ruiz, François Trochu. 2011. « Experimental study of flexible injection to manufacture parts of strong curvature ». Polymer Composites. vol. 32 , nº 6. p. 882-895.
Yuwei Feng, Philippe Causse, Jihui Wang, François Trochu. 2022. « A coupled 1D/2D co simulation approach for flow pattern of fiber reinforced composite in the VARTM process ». Affiche présentée lors de la conférence : Colloque du Centre de Recherche sur les Systèmes Polymères et Composites à haute performance (CREPEC) ( Montreal, QC, Canada, 08 déc. 2022 )
Yixun Sun, Cédric Béguin, Philippe Causse, Brahim Benmokrane, François Trochu. 2022. « Convective heat transfer between a bead packing and its bounding wall ». Affiche présentée lors de la conférence : Journée du génie par la simulation ( Montreal, QC, Canada, May 20, 2022 )
Bin Yang, François Trochu, Cédric Béguin, Jihui Wang, Philippe Causse. 2022. « Tomographic modelling of engineering textiles for numerical simulation: A parametric approach ». Affiche présentée lors de la conférence : Colloque du Centre de Recherche sur les Systèmes Polymères et Composites à haute performance (CREPEC) ( Montreal, QC, Canada, 08 déc. 2022 )
F. Trochu, B. Yang, J. Wang, C. Béguin, P. Causse. 2022. « Creation of digital material twin (dmt) geometric models of high performance composites based on x-ray microtomography ». 20th European Conference on Composite Materials: Composites Meet Sustainability, ECCM (Lausanne, Suisse, June 26-30, 2022) p. 674-681. Ecole Polytechnique Federale de Lausanne (EPFL).
F. Anne, C. Béguin, S. Etienne, P. Causse, D. Scott, L. Bornard. 2019. « Void fraction and bubble size measurement inside clouds of air bubbles in flowing water ». 38th IAHR World Congress : 'Water – Connecting the World" (Panama city, Panama, Sept. 01-06, 2019) IAHR.
P. Causse, F. Trochu. 2018. « Combined characterization of pore size distribution and permeability in fibrous textiles by capillary flow porometry ». 14th International Conference on Flow Processing in Composite Materials (Lulea, Switzerland, May 30 - June 01, 2018)
F. Trochu, S. Hilal, W. Huang, Y. Sun, P. Causse, V. Brailovski. 2018. « Reconstruction and data compression of three-dimensional composite fiber architecture from microtomographic images ». 7th International Symposium on Air/Craft Materials (ACMA) (Compiègne, France, Apr. 24-26, 2018)
B. Bonnard, P. Causse, F. Trochu. 2017. « Characterization of fibrous reinforcements by capillary flow porometry: influence of fiber volume fraction ». 10th Canadian-International Conference on Composites : Advanced Composites in Addressing Global Challenges of the 21st Century (CANCOM) (Ottawa, ON, Canada, July 17-20, 2017)
B. Bonnard, P. Causse, F. Trochu. 2016. « Experimental investigation of capillary flow porometry for characterization of dual scale porosity in fibrous reinforcements ». 13th International Conference on Flow Processing in Composite Materials (Kyoto, Japan, July 06-08, 2016)
M. Benavente, P. Causse, N. Vernet, L. Marcin, T. Godon, E. Ruiz. 2015. « Residual stresses in 3D interlock composites: characterization and simulation ». 6th International Conference on Science and Technology of Composite Materials (COMAT) (Buenos Aires, Argentina, May 07-08, 2015)
H. Courteau-Godmaire, E. R. Fotsing, P. Causse, M. Lévesque, E. Ruiz. 2015. « Numerical modeling of resin shrinkage around insert in composite sandwich panels ». 20th International Conference on Composite Materials (ICCM) (Copenhagen, Denmark, July 19-24, 2015) International Committee on Composite Materials.
P. Causse, E. Ruiz, F. Trochu. 2013. « Processing warpage of asymmetric composite panels manufactured by resin transfer molding ». 19th International Conference on Composite Materials (ICCM) (Montréal, QC, Canada, July 28 - Aug. 02, 2013) p. 440-447. International Committee on Composite Materials.
J. Renaud, P. Causse, E. Ruiz, F. Trochu. 2013. « A study of consolidation equilibrium in composites made by flexible injection ». 19th International Conference on Composite Materials (ICCM) (Montréal, QC, Canada, July 28 - Aug. 02, 2013) p. 1223-1233. International Committee on Composite Materials.
P. Causse, E. Ruiz, F. Trochu. 2011. « Analysis of fiber preforming for improved manufacturing of curved parts by flexible injection ». 18th International Conference on Composites Materials (ICCM) (Jeju, Korea, Republic of, Aug. 21-26, 2011) International Committee on Composite Materials.
P. Causse, E. Ruiz, F. Trochu. 2011. « Fabrication of curved parts by flexible injection: Influence of processing conditions on composite quality and analysis of distortion ». Proceedings of the American Society for Composites 2011-Twenty-Sixth Technical Conference (2011) (Montreal, QC, Canada, Sept. 26-28, 2011) p. 1340-1351. DEStech Publications.