Lucas Hof

Département de génie mécanique
Axes de recherche :
- Matériaux et fabrication
Expertises :
- Fabrication avancée
- Micro-usinage (matériaux difficiles à usiner)
- Fabrication électrochimique
- Mécatronique
Publications: article
Publications: conference_itemaff
Publications: article
Publications: article
Publications: conference_item
8th International Conference on Information Systems, Logistics and Supply Chain: Interconnected Supply Chains in an Era of Innovation (ILS)
Publications: article
Publications: article
Publications: conference_item
Canadian Society for Mechanical Engineering International Congress (2021)
Publications: conference_item
Proceedings of the 26th Canadian Congress of Applied Mechanics (CANCAM 2017)
Publications: article
Publications: conference_itemaff
Publications: article
Publications: article_nrp
Publications: article_nrp
Publications: conference_itemau
Publications: conference_item
ASME Pressure Vessels & Piping Conference
Publications: article
Publications: article
Publications: conference_itemaff
Publications: conference_itemau
Publications: conference_itemau
Publications: conference_itemaff
Publications: conference_itemau
Publications: conference_item
2017 World Congress on Micro and Nano Manufacturing (WCMNM) : A Joint Conference of ICOMM/4M/IFMM
Publications: conference_item
Proceedints of the EUSPEN International Conference, 2004
Publications: conference_itemau
Publications: conference_itemau
Publications: conference_itemaff
Publications: conference_itemau
Publications: conference_itemau
Publications: conference_item
Proceedings of the Canadian Society for Mechanical Engineering International Congress 2016
Publications: conference_itemaff
Publications: conference_itemau
Publications: conference_itemau
Publications: conference_itemau
Publications: conference_itemaff
Publications: book_section
2021 World Manufacturing Report: Digitally Enabled Circular Manufacturing
Publications: conference_itemau
Publications: conference_itemau
Publications: article
Publications: conference_item
18th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN 2018)
Publications: conference_item
2018 CSME International Congress
Publications: article
Publications: article
Publications: article
Publications: thesis
Publications: conference_item
11th International Conference on Micromanufacturing (ICOMM 2016)
Publications: article
Publications: conference_item
16th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN 2016)
Publications: conference_item
Americas International Meeting on Electrochemistry and Solid State Science 2018 (AiMES 2018)
Publications: conference_itemau
Publications: article
Publications: conference_item
16th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN 2016)
Publications: conference_item
16th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN 2016)
Publications: conference_item
RAPID + TCT 2017 Event and Conference
Publications: conference_itemau
Publications: article
Publications: conference_item
Canadian Society for Mechanical Engineering International Congress (2021)
Publications: article
Publications: article
Publications: conference_item
Advances in Production Management Systems. Artificial Intelligence for Sustainable and Resilient Production Systems : IFIP WG 5.7 International Conference on Advances in Production Management Systems, APMS 2021, Proceedings, Part I
Publications: article
Publications: article
Publications: article
Publications: conference_itemau
Publications: conference_item
43e congrès de l’AQHSST
Publications: article
Publications: article
Publications: article
Publications: article
Publications: conference_itemaff
Publications: conference_item
Proceedings of the Canadian Society for Mechanical Engineering International Congress 2016
Publications: book
Publications: conference_itemau
Publications: article
Publications: conference_item
CIGI Qualita MOSIM : Propulser la performance - Interconnectivité et collaboration dans un contexte d'intelligence artificielle
Publications: article
Publications: article
Publications: conference_item
65th Annual Meeting of the International Society of Electrochemistry
Publications: article
Publications: conference_item
Proceedings of the Canadian Society for Mechanical Engineering International Congress 2016
Publications: article
Publications: article
Publications: article
Cours
SYS803 | Systèmes de mesure | (Automne 2023) |
MEC200 | Technologie des matériaux | (Été 2023) |
MEC200 | Technologie des matériaux | (Hiver 2023) |
Encadrements
Projet d'application à 15 crédits-
En codirection avec : Kenné, Jean-Pierre
Vers un processus circulaire pour la fabrication additive des chaussures à talons hauts – évaluation des procédés de fabrication additifs, sélection des matériaux et caractérisation mécanique, par Ghimouz,Chahine.
Hiver 2021
-
En codirection avec : Hof, Lucas Abia
Quantification de la corrosion dans les assemblages à brides boulonnées munis de joints d'étanchéité, par Dos Santos Barreto,Rafael Renan.
Hiver 2020
-
En codirection avec : Kenné, Jean-Pierre
Évaluation du temps d’assemblage d’une entreprise en se basant sur l’historique de production, par Pamen Heubo,Gaëtan Joël.
Hiver 2020
-
En codirection avec : Zednik, Ricardo J.
Antireflective Nanopatterned Surface Treatment for Glass, par Feith,Lucas.
Été 2020
-
En codirection avec : Tabiai, Ilyass
Développement de produit pour animaux robuste et innovateur visant à améliorer le comportement de l'animal, par Singleton,Michael.
Été 2022
-
En codirection avec : Di Labbio, Giuseppe
Modélisation de la couverture de la peinture en poudre pour des applications industrielles automatisées, par Rayeh,Lilia.
Été 2023
-
En codirection avec : Kenné, Jean-Pierre
Optimisation du système de production d'une entreprise manufacturière dans le contexte de l'industrie 4.0, par Bru,Valentin.
Hiver 2023
-
En codirection avec : Hof, Lucas Abia
Mise en service de lunettes intelligentes dans l'assemblage aéronautique, par Gazani Ondze,Euloge David.
Été 2023
-
En codirection avec : Tahan, Antoine
Prédiction de l'évolution du taux de rendement global (TRG ou OEE) des machines de production par intelligence artificielle, par Brax,Matthieu.
Automne 2023
-
En codirection avec : Hof, Lucas Abia
Intégration des stratégies de cadenassage à la gestion de production dans le secteur industriel, par Mdafai,Amine.
Été 2021
-
En codirection avec : Kenné, Jean-Pierre
Développement et optimisation d'outils de collecte, de tri et de recyclage des déchets domestiques en milieu urbain dans le contexte d'économie circulaire, par Attia,Marwen.
Été 2021
-
En codirection avec : Nadeau, Sylvie
Conception d'un système manufacturier de panneaux solaires : un assemblage hybride (manuel – automatique – 5.0), par Bouche Noumbi,Emmanuel Jonathan.
Hiver 2023
-
En codirection avec : Hof, Lucas Abia
Détermination et quantification des paramètres affectant l'estimation de coût de projet pour les pièces usinées de haute précision, par Jean-Baptiste,Deborah.
Automne 2021
-
En codirection avec : Nadeau, Sylvie
Mise en service d'un gant intelligent, par Moutaki,Anis.
Hiver 2021
-
En codirection avec : Hof, Lucas Abia
Modèle d'implémentation de l'industrie 4.0 dans la maintenance des matériels roulants, par Ârous,Radouane.
Hiver 2022
-
L'amélioration de la communication interne des entreprises pour la gestion des risques dans le cadre de l'industrie 5.0, par Zidane,Mohamed Othmane.
Été 2023
-
En codirection avec : Kenné, Jean-Pierre
Proposition d'un modèle d'ordonnancement de la production adapté aux systèmes de fabrication sur mesure, par Garcia,Edgar De Jesus.
Automne 2023
-
En codirection avec : Kenné, Jean-Pierre
Amélioration des performances et mise en place d'un système intelligent des procédés manufacturiers dans un contexte de développement durable, par Cedric Wato,Cedric Wato.
Automne 2022
-
En codirection avec : Kenné, Jean-Pierre
Optimisation des chaînes d'approvisionnement en boucle fermée dans un contexte d'économie circulaire à l'ère de l'industrie 4.0, par Delpla,Victor.
Automne 2020
-
En codirection avec : Kenné, Jean-Pierre
Amélioration des performances des systèmes de fabrication circulaire dans le paradigme de l'industrie 4.0 en contexte de chaine d’approvisionnement en boucle fermée, par Boudane,Massiva.
Hiver 2022
-
En codirection avec : Hof, Lucas Abia
Optimisation des performances des systèmes manufacturiers en contexte de chaîne d'approvisionnement en boucle fermée, par Megoze Pongha,Patrick.
Hiver 2022
-
En codirection avec : Wuthrich, Rolf
Toward a Smart System for Pets, par Hoang,Van Tien.
Été 2021
-
En codirection avec : Maranzana, Roland
Future Concept for Modular Energy Conversion Solutions, par Chavanel Precloux,Lucas.
Automne 2023
-
Développement d'une machine et du contrôle d'un procédé d'usinage électrochimique pour matériaux difficiles à usiner, par Villeneuve,Guillaume.
Automne 2022
-
En codirection avec : Kenné, Jean-Pierre
Évolution de l'industrie de la chaussure : vers des pratiques durables grâce à la fabrication avancée, par Ghimouz,Chahine.
Automne 2023
-
En codirection avec : Zednik, Ricardo J.
Towards High-Volume Anti-Reflective Glass Nanoimprinting, par Cole,Douglas.
Hiver 2023
-
En codirection avec : Hof, Lucas Abia
Economic Feasibility Analysis of a Medical Mask Closed-Loop Supply Chain: a Case Study in the Montreal Region, par Villalobos Cortes,Erika Guadalupe.
Automne 2023
-
En codirection avec : Hof, Lucas Abia
Prédiction de l’évolution du taux de rendement global des machines de production par intelligence artificielle, par Barthel,Marion.
Automne 2023
-
En codirection avec : Brousseau, Emmanuel
Remanufacturation de verre technique en composants à forte valeur ajoutée, par Leclair,Jean-Philippe.
Automne 2023
-
En codirection avec : Bocher, Philippe
On the Investigation of Coating Characteristics Within the Experimental Domain Imposed by Inner-Diameter-HVOF Process, par Prudnikov,Cassandra.
Automne 2023
-
En codirection avec : Lalonde, Sébastien
Employing Metamaterials in Additive Manufacturing for Supplier Streamlining through Process Simulation and Validation, par Ben Abdallah,Mohamed Amine.
Automne 2023
-
En codirection avec : Hof, Lucas Abia
Intégration de la fabrication additive d'aluminium (cold spray) à l'extrusion de poutre, par Thibault,Alexis.
Automne 2023
-
En codirection avec : Hof, Lucas Abia
Développement d'une methodologie d'amelioration de la methode de comparaison entres deux modèles CAO, par Douik,Helmi.
Automne 2023
-
En codirection avec : Hof, Lucas Abia
Caractérisation du comportement vibratoire de matériaux auxétiques appliquée aux développements d'amortisseurs pour roulements de turbomachine, par Sidjou Nzali,Loïc Macaire.
Automne 2023
-
En codirection avec : Demarquette, Nicole R.
Towards Freeform Wood Fibre Composite Manufacturing for Future Gas Turbine Package Design, par Le Moulec,Yoann.
Automne 2023
-
En codirection avec : Feulvarch, Éric
Analyse prédictive des propriétés mécaniques d'extrudés d'aluminium, par Villié,Loïc.
Automne 2023
-
Electropolishing and its Surface Roughness Profile Prediction for Additive Manufactured Metal Parts, par Pourrahimi Seyghalani,Shamim.
Automne 2023
-
En codirection avec : Bouzid, Hakim A.
Corrosion Quantification of Bolted Flanged Gasketed Joints, par Hakimian,Soroosh.
Automne 2023
-
En codirection avec : Kenné, Jean-Pierre
Towards Circular Manufacturing: Development of a Dynamic Sustainable Model for a Smart Closed-loop Manufacturing System, par Mejia Moncayo,Camilo.
Automne 2023
-
En codirection avec : Kenné, Jean-Pierre
Statégies optimales d'intégration du processus de cadenassage/décadenassage et de maintenance en production manufacturière intelligente : vers la Santé, Sécurité et Environnement (SSE) 4.0, par Delpla,Victor.
Automne 2023
-
A Predictive Model for Glass Sheets State of Degradation, par Delbari,Seyed Ali.
Automne 2023
-
En codirection avec : Kenné, Jean-Pierre
Development of a Neural Network Including a Training Curriculum for Powder Coating on a High Diversity and Low Volume Production Line, par Brunet,Rafael.
Automne 2023
-
En codirection avec : Zitoune, Redouane
Influence of Additive Manufacturing Parameters on the Mechanical Strength of Repair Patches for Circular Manufacturing Strategies, par Chintalapalli,Arjun Chandra Shekar.
Automne 2023
-
Étude de faisabilité technique portant sur la mise en service de la machine d'insertion des aubes rotatives, par Amadu Bah,Chernor Pampou.
Hiver 2022
-
En codirection avec : Hof, Lucas Abia
Désassemblage 4.0/5.0, par Grange,Mathieu.
Hiver 2023
-
Outil de planification, par Pamen Heubo,Gaëtan Joël.
Hiver 2020
-
Ingénieur en génie mécanique - Gestion de projets, par Bouche Noumbi,Emmanuel Jonathan.
Hiver 2023
-
Intervention sur chantier de construction comme un conseiller en santé et sécurité, par Kihlou,Houssem.
Hiver 2022
Douglas F. Cole, Ricardo J. Zednik, Lucas A. Hof. 2023. « High aspect ratio sapphire micromachining by ultraviolet laser-induced plasma-assisted ablation (LIPAA) ». International Journal of Applied Ceramic Technology. (Sous presse)
Victor Delpla, Jean-Pierre Kenné, Lucas A. Hof. 2023. « Integration of operational lockout/tagout in a joint production and maintenance policy of a smart production system ». International Journal of Production Economics. vol. 263
Chahine Ghimouz, Jean-Pierre Kenné, Lucas A. Hof. 2023. « On sustainable design and manufacturing for the footwear industry – Towards circular manufacturing ». Materials and Design. vol. 233
Soroosh Hakimian, Shamim Pourrahimi, Abdel-Hakim Bouzid, Lucas A. Hof. 2023. « Application of machine learning for the classification of corrosion behavior in different environments for material selection of stainless steels ». Computational Materials Science. vol. 228
Mohammad Maroufkhani, Soorosh Hakimian, Alireza Khodabandeh, Iulian Radu, Lucas A. Hof, Mohammad Jahazi. 2023. « Influence of oxygen content in the protective gas on pitting corrosion resistance of a 316l stainless steel weld joint ». Materials. vol. 16 , nº 17.
Camilo Mejía-Moncayo, Jean-Pierre Kenné, Lucas A. Hof. 2023. « On the development of a smart architecture for a sustainable manufacturing-remanufacturing system: A literature review approach ». Computers and Industrial Engineering. vol. 180
Shamim Pourrahimi, Soroosh Hakimian, Abdel-Hakim Bouzid, Lucas A. Hof. 2023. « On the use of machine learning algorithms to predict the corrosion behavior of stainless steels in lactic acid ». Metals. vol. 13 , nº 8.
Guillaume Villeneuve, Lucas A. Hof. 2023. « On the use of the current signal in spark assisted chemical engraving for micromachining process control ». Precision Engineering. vol. 83 p. 181-191.
Loïc Villié, Elodie Cabrol, Lucas Hof, Eric Feulvarch, Philippe Bocher. 2023. « Heterogeneities induced by uniaxial compression and resulting errors in material behavior assessment ». International Journal of Material Forming. vol. 16 , nº 6.
Victor Delpla, Kevin Chapron, Jean-Pierre Kenne, Lucas Hof. 2022. « Towards intelligent manufacturing system safety strategies: generating LockOut/TagOut sheets by Machine Learning - a case study ». IFAC-PapersOnLine. vol. 55 , nº 10. p. 1001-1006.
Victor Delpla, Jean-Pierre Kenné, Lucas A. Hof. 2022. « Circular manufacturing 4.0: Towards internet of things embedded closed-loop supply chains ». The International Journal of Advanced Manufacturing Technology. vol. 118 p. 3241-3264.
Soroosh Hakimian, Lucas Hof, Hakim A. Bouzid. 2022. « Investigation of corrosion in bolted flanged joints using a novel experimental setup ». ECS Meeting Abstracts. vol. MA2022-01 , nº 16. p. 990.
Patrick Megoze Pongha, Jean-Pierre Kenné, Edgar De Jesus Garcia, Lucas A. Hof. 2022. « Optimal joint production, maintenance and product quality control policies for a continuously deteriorating manufacturing system ». International Journal of Modelling and Simulation. (Sous presse)
Camilo Mejia-Moncayo, Alix E. Rojas, Jean-Pierre Kenne, Lucas A. Hof. 2022. « An ant approach to define product families and remanufacturing cells ». IFAC-PapersOnLine. vol. 55 , nº 10. p. 73-78.
Patrick Megoze Pongha, Guy-Richard Kibouka, Jean-Pierre Kenné, Lucas A. Hof. 2022. « Production, maintenance and quality inspection planning of a hybrid manufacturing/remanufacturing system under production rate-dependent deterioration ». International Journal of Advanced Manufacturing Technology. vol. 121 p. 1289-1314.
Nicolas Vanderesse, Philippe Bocher, Natalia Nuño, Alejandro Yánez, Lucas A. Hof. 2022. « On the characterization of roughness and geometrical irregularities of additively manufactured single titanium-alloy struts ». Additive Manufacturing. vol. 54
Panteha Fallah, Lucas A. Hof, Rolf Wuthrich. 2021. « Fabrication of high-thickness and low surface roughness metal parts by a hybrid electrochemical manufacturing process ». Advances in Industrial and Manufacturing Engineering. vol. 2 6 p.
Lucas Abia Hof, Rolf Wuthrich. 2021. « Glass precision micro-cutting using spark assisted chemical engraving ». Advances in Industrial and Manufacturing Engineering. vol. 3
S. Nadeau, R. Bruder, L. Hof. 2021. « Using Smart Glasses in assembly/disassembly: Current state of the art ». Travail et Santé. vol. 37 , nº 2. p. 2-6.
Jacopo Profili, Rafael Brunet, Émilie L. Dubois, Vincent Groenhuis, Lucas A. Hof. 2021. « Use of 3D printed connectors to redesign full face snorkeling masks in the COVID-19 era: A preliminary technical case-study ». Annals of 3D Printed Medicine. vol. 3
Jacopo Profili, Emilie L. Dubois, Dimitrios Karakitsos, Lucas A. Hof. 2021. « Overview of the user experience for snorkeling mask designs during the COVID-19 pandemic ». Healthcare. vol. 9 , nº 2. 19 p.
Zahra Chaghazardi, Lucas Hof, Rolf Wuthrich. 2020. « Electropolishing of inside surfaces of stainless steel tubing ». ECS Transactions. vol. 97 , nº 7. p. 523-536.
Pantea Koushki, Tsz-Ho Kwok, Lucas Hof, Rolf Wuthrich. 2020. « Reinforcing silicone with hemp fiber for additive manufacturing ». Composites Science and Technology. vol. 194 p. 141-151.
Rolf Wuthrich, Lucas A. Hof. 2019. « Low batch size production of glass products requiring micrometer precision ». IFAC-PapersOnLine. vol. 52 , nº 10. p. 319-322.
Lucas A. Hof, Rolf Wuthrich. 2018. « Industry 4.0 Towards fabrication of mass-personalized parts on glass by Spark Assisted Chemical Engraving (SACE) ». Manufacturing Letters. vol. 15 p. 76-80.
Lucas A. Hof, Rolf Wüthrich. 2018. « Rapid prototyping of packaged glass devices: Eliminating a process step in the manufacturing workflow from micromachining to die singularizing ». Manufacturing Letters. vol. 17 p. 9-13.
Lucas A. Hof, Md Masiar Rahman, Rolf Wuthrich. 2017. « Using Taylor vortices to create a film of nanoparticles for dip-coating ». Manufacturing Letters. vol. 13 p. 21-24.
Lucas A. Hof, Jana Abou Ziki. 2017. « Micro-hole drilling on glass substrates-A review ». Micromachines. vol. 8 , nº 2.
Lucas Abia Hof, Xin Guo, Minseok Seo, Rolf Wuthrich, Jesse Greener. 2017. « Glass imprint templates by spark assisted chemical engraving for microfabrication by hot embossing ». Micromachines. vol. 8 , nº 1.
Jana D. Abou Ziki, Lucas A. Hof, Rolf Wuthrich. 2015. « The machining temperature during Spark Assisted Chemical Engraving of glass ». Manufacturing Letters. vol. 3 p. 9-13.
R. Wuthrich, L. A. Hof. 2006. « The gas film in spark assisted chemical engraving (SACE) - A key element for micro-machining applications ». International Journal of Machine Tools and Manufacture. vol. 46 , nº 7-8. p. 828-835.
R. Wuthrich, K. Fujisaki, P. Couthy, L. A. Hof, H. Bleuler. 2005. « Spark assisted chemical engraving (SACE) in microfactory ». Journal of Micromechanics and Microengineering. vol. 15 , nº 10. p. 276-280.
R. Wuthrich, L. A. Hof, A. Lal, K. Fujisaki, H. Bleuler, P. Mandin, G. Picard. 2005. « Physical principles and miniaturization of Spark Assisted Chemical Engraving (SACE) ». Journal of Micromechanics and Microengineering. vol. 15 , nº 10. p. 268-275.
D. E. Ondze Gazani, S. Nadeau, L. Hof. 2023. « Mise en service des lunettes intelligentes pour l’assemblage ou le désassemblage ». 43e congrès de l’AQHSST (Trois-Rivières, QC, Canada, 10-12 mai 2023)
Erika Villalobos, Tasseda Boukherroub, Lucas Hof, Neila El-Asli. 2023. « Economic feasibility analysis of a medical mask closed-loop supply chain: A Canadian case study ». CIGI Qualita MOSIM : Propulser la performance - Interconnectivité et collaboration dans un contexte d'intelligence artificielle (Trois-Rivières, QC, Canada, June 14-16, 2023)
Soroosh Hakimian, Lucas A. Hof, Hakim A. Bouzid. 2022. « An improved fixture to quantify corrosion in bolted flanged gasketed joints subjected to service conditions ». ASME Pressure Vessels & Piping Conference (Las Vegas, Nevada, USA, July 17-22, 2022) American Society of Mechanical Engineers (ASME).
Victor Delpla, Jean-Pierre Kenné, Ameth Maloum Fall, Mahan Balalpour, Lucas A. Hof. 2021. « Metal scrap recycling 4.0: Towards smart operation and production of high-quality alloys ». Canadian Society for Mechanical Engineering International Congress (2021) (Charlottetown, PE, Canada, June 28-30, 2021) Charlottetown, P.E.I. : University of Prince Edward Island. Robertson Library.
Jean-Philippe Leclair, Newton Borges, Duncan Cree, Lucas A. Hof. 2021. « Towards circular manufacturing: Repurposing eggshell waste as filler for poly lactic acid feedstock for 3D printing ». Canadian Society for Mechanical Engineering International Congress (2021) (Charlottetown, PE, Canada, June 28-30, 2021) Charlottetown, P.E.I. : University of Prince Edward Island. Robertson Library.
Camilo Mejía-Moncayo, Jean-Pierre Kenné, Lucas A. Hof. 2021. « A hybrid architecture for a reconfigurable cellular remanufacturing system ». Advances in Production Management Systems. Artificial Intelligence for Sustainable and Resilient Production Systems : IFIP WG 5.7 International Conference on Advances in Production Management Systems, APMS 2021, Proceedings, Part I (Nantes, France, Sept. 05-09, 2021) p. 488-496. Springer.
Victor Delpla, Lucas A. Hof, Jean-Pierre Kenné. 2020. « Closed loop supply chain optimization for Circular Manufacturing using Industry 4.0 technologies ». 8th International Conference on Information Systems, Logistics and Supply Chain: Interconnected Supply Chains in an Era of Innovation (ILS) (Austin, TX, USA, Apr. 22-24, 2020) p. 220-227. International Conference on Information Systems, Logistics and Supply Chain.
Lucas A. Hof, Deependra Singh, Panteha Fallah, Rolf Wüthrich. 2018. « High precision electrochemical manufacturing processes to meet the demand of Industry 4.0 ». 18th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN 2018) (Venice, Italy, June 04-08, 2018) Euspen.
Lucas A. Hof, Rolf Wuthrich. 2018. « Glass micro-cutting by Spark Assisted Chemical Engraving ». 2018 CSME International Congress (Toronto, ON, Canada, May 27-30, 2018) CSME.
Lucas Abia Hof, Rolf Wüthrich. 2018. « Electrochemical manufacturing to support industry 4.0 – Spark Assisted Chemical Engraving (SACE) ». Americas International Meeting on Electrochemistry and Solid State Science 2018 (AiMES 2018) (Cancun, Mexico, Sept. 30 - Oct. 04, 2018) Electrochemical Society.
Panteha Fallah, Lucas A. Hof, Rolf Wüthrich. 2017. « Electroforming of non-conductive 3D printed parts ». Proceedings of the 26th Canadian Congress of Applied Mechanics (CANCAM 2017) (Victoria, BC, Canada, May 29 - June 01, 2017) Canadian Congress of Applied Mechanics.
L. A. Hof, L. Heinrich, R. Wuthrich. 2017. « Towards high precision manufacturing of glass tools by Spark Assisted Chemical Engraving (SACE) for micro forming techniques ». 2017 World Congress on Micro and Nano Manufacturing (WCMNM) : A Joint Conference of ICOMM/4M/IFMM (Kaohsiung City, Taiwan, Mar. 27-30, 2017)
Lucas Hof, Rolf Wuthrich. 2017. « Multiscale post-processing of metal additive manufactured parts by electro-polishing technology ». RAPID + TCT 2017 Event and Conference (Pittsburgh, PA, USA, May 08-11, 2017) SME.
L. A. Hof, R. Wuthrich. 2016. « Industry 4.0 – towards fabrication of ultra-customized parts on glass by Spark Assisted Chemical Engraving (SACE) ». Proceedings of the Canadian Society for Mechanical Engineering International Congress 2016 (Kelowna, BC, Canada, June 26-29, 2016)
Lucas Abia Hof, Frederic Charbonneau, Diana Consuelo Rodriguez Burbano, Ana Maria Ibarra-Ruiz, John A. Capobianco, Rolf Wuthrich. 2016. « Spark Assisted Chemical Engraving (SACE) – from subtractive to additive manufacturing technology ». 11th International Conference on Micromanufacturing (ICOMM 2016) (Orange County, CA, USA, Mar. 29-31, 2016)
Lucas Abia Hof, Md Masiar Rahman, Rolf Wüthrich. 2016. « Multiscale post-processing of metal additive manufactured parts by electro-polishing technology ». 16th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN 2016) (Nottingham, UK, May 30 - June 03, 2016) Euspen.
Lucas Hof, Patrick Thibaut, Rolf Wüthrich. 2016. « Spark Assisted Chemical Engraving (SACE) – an innovative technology with high potential for industry ». 16th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN 2016) (Nottingham, UK, May 30 - June 03, 2016) Euspen.
Lucas Hof, Rolf Wüthrich. 2016. « Micromachining glass with in situ fabricated micro-tools ». 16th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN 2016) (Nottingham, UK, May 30 - June 03, 2016) Euspen.
M. M. Rahman, L. A. Hof, R. Wuthrich. 2016. « Multiscale electropolishing of additive manufactured and standard grade titanium alloys by pulsed voltages ». Proceedings of the Canadian Society for Mechanical Engineering International Congress 2016 (Kelowna, BC, Canada, June 26-29, 2016)
R. Wuthrich, L. A. Hof. 2016. « Electrochemical processes to meet the needs of industry 4.0 ». Proceedings of the Canadian Society for Mechanical Engineering International Congress 2016 (Kelowna, BC, Canada, June 26-29, 2016)
R. Wüthrich, J.D. Abou Ziki, L. A. Hof, P. Matoorian, G. Cusanelli, D. Lüthi. 2014. « Glass micro-machining by contact glow discharge electrolysis ». 65th Annual Meeting of the International Society of Electrochemistry (Lausanne, Switzerland, Aug. 31 - Sept. 05, 2014)
L. A. Hof, A. Lal, K. Fujisaki, R. Wüthrich, H. Langen, H. Bleuler. 2004. « 3D Micro structuring of glass with an AFM ». Proceedints of the EUSPEN International Conference, 2004 (Glasgow, Scotland, UK, May 31 - June 02, 2004) p. 89-90. Kempston : LG Digital.
Maroua Raya, Ali Aidibe, Sylvie Nadeau, Lucas Hof, Hany Moustapha. 2023. « Livre blanc Réseau SDG Innovation: Au delà de l’industrie 4.0/5.0 : Vers une société Smart Digital Green ». (Montréal, QC, Canada : 9 nov. 2022). 60 p.
Mathieu Grange, Sylvie Nadeau, Lucas Hof. 2022-11-02. « Disassembly 4.0/5.0 in the Automotive Industry ». Substance ÉTS. vol.
Mathieu Grange, Sylvie Nadeau, Lucas Hof. 2022-11-02. « Désassemblage 4.0/5.0 : le cas de l’industrie automobile ». Substance ÉTS. vol.
Soorosh Hakimian, Hakim A. Bouzid, Lucas Hof. 2022. « A study on the influence of operational factors on the flange face corrosion using a novel experimental test bench ». Communication lors de la conférence : ASME Bolted Joint Reliability Symposium ( Houston, TX, USA, Oct. 26-27, 2022 )
S. Nadeau, L. Hof, K. Landau. 2022. « Les systèmes d'assistance numérique au service de la diversité ». Communication lors de la conférence : Congrès de l'AQHSST ( Sherbrooke, QC, Canada, 11-13 mai 2022 )
Lucas Hof. 2021. « Digital entreprises - a new educative learning program for students and professionals ». Communication lors de la conférence : Mardi 4.0 - seminar series "Reseau Innovation 4.0 Network" ( Montréal, QC, Canada, )
L. A. Hof, R. Wüthrich, T. Kwok. 2018. « Industry 4.0 and its impact on aviation ». Communication lors de la conférence : John Molson School of Business, John Molson Executive Centre, Client: Xiamen Air ( Montreal, QC, Canada, May 15, 2018 )
L. A. Hof, R. Wüthrich, T. Kwok. 2018. « Industry 4.0 – what lies ahead for manufacturing in the Sector? ». Communication lors de la conférence : John Molson School of Business, John Molson Executive Centre & HEC Paris ( Montreal, QC, Canada, May 10, 2018 )
Lucas A. Hof. 2018. « Indirect additive manufacturing and multiscale post-processing for fabrication of complex, high precision metal parts ». Communication lors de la conférence : RAPID + TCT 2018 Event and Conference ( Fort Worth, TX, USA, Apr. 23-26, 2018 )
Lucas Abia Hof, Rolf Wüthrich. 2018. « Electrochemical manufacturing to support industry 4.0 – Spark Assisted Chemical Engraving (SACE) ». Communication lors de la conférence : AiMES 2018 - ECS and SMEQ Joint International Meeting ( Cancun, Mexico, Sept. 30-Oct. 4, 2018 )
L. A. Hof, R. Wüthrich. 2017. « Electrochemistry 4.0 ». Communication lors de la conférence : 231st Electrochemical Society Meeting (ECS) ( New Orleans, LA, USA, May 28 - June 01, 2017 )
Lucas Hof, Rolf Wuthrich. 2017. « Multiscale post-processing of metal additive manufactured parts by electro-polishing technology ». Communication lors de la conférence : RAPID + TCT 2017 Event and Conference ( Pittsburgh, PA, USA, May 08-11, 2017 )
D. Singh, L. A. Hof, R. Wuthrich. 2017. « Micro and nano 3D Feature deposition using localized electrochemical deposition ». Communication lors de la conférence : 1st National Conference : Converging on Nanomanufacturing : Innovation 360 ( Montréal, QC, Canada, Sept. 25-26, 2017 )
L. A. Hof, C. Goyer, R. Wüthrich. 2016. « Microstructuring of glass by spark assisted chemical engraving (SACE) ». Communication lors de la conférence : International Conference on Design and Production Engineering ( Berlin, Germany, July 25-26, 2016 )
L. A. Hof, B. Presley, D. VanTran, R. Wüthrich. 2016. « Spark Assistant Chemical Engraving (SACE) – an innovative tool for the microfluidic community ». Communication lors de la conférence : FluidicMEMS : HiFi Bio ( Boston, MA, USA, Oct. 26, 2016 )
L. A. Hof, M. M. Rahman, R. Wuthrich. 2016. « Multiscale post-processing of metal additive manufactured parts by electro-polishing technology ». Communication lors de la conférence : Salon de la Technologie de Fabrication de Montréal (STFM) ( Montréal, QC, Canada, 15-18 mai 2016 )
L. A. Hof, R. Wüthrich. 2016. « Electrochemical processes to meet the needs of industry 4.0 ». Communication lors de la conférence : Forum Industriel CREPEC ( Montréal, QC, Canada, 20 oct. 2016 )
L. A. Hof, R. Wüthrich. 2016. « The digital engineer - New challenges for the Canadian Universities ». Communication lors de la conférence : Advanced Manufacturing Canada (AMC) 2016 ( Toronto, ON, Canada, Nov. 02-03, 2016 )
L. A. Hof, F. Charbonneau, D. J. Abou Ziki. 2015. « Glass micromachining by Spark Assisted Chemical Engraving (SACE) ». Communication lors de la conférence : Colloque annuel Plasma-Québec 2015 ( Montreal, QC, Canada, June 3-5, 2015 )
L. A. Hof, F. Charbonneau, R. Wüthrich. 2015. « Spark Assisted Chemical Engraving (SACE) - a versatile micro machining technology for microfluidic devices ». Communication lors de la conférence : 98th Canadian Chemistry Conference and Exhibition ( Ottawa, Canada, June 13-17, 2015 )
Lucas Hof. 2021. « Cirdular Manufacturing 4.0 ». In 2021 World Manufacturing Report: Digitally Enabled Circular Manufacturing . p. 19. World Manufacturing Foundation.
Lucas Abia Hof. 2018. « High-precision micro-machining of glass for mass-personalization ». Thèse de doctorat. Montreal , Concordia University
L. A. Hof, R. Wuthrich. 2017. « Micro-/nanofabrication in the era of Industry 4.0 - Spark Assisted Chemical Engraving (SACE) - a versatile technology for glass machining and nanoparticle deposition ». Affiche présentée lors de la conférence : 1st National Conference : Converging on Nanomanufacturing : Innovation 360 ( Montréal, QC, Canada, Sept. 25-26, 2017 )
L. A. Hof, J.D. Abou Ziki, R. Wuthrich. 2016. « Tool-glass bonding phenomenon during glass micro-machining by Spark Assisted Chemical Engraving (SACE) - Issues and opportunities ». Affiche présentée lors de la conférence : International Conference on Design and Production Engineering ( Berlin, Germany, July 25-26, 2016 )
L. A. Hof, R. Wüthrich. 2016. « Electrochemical manufacturing processes to meet the demand of Industry 4.0 ». Affiche présentée lors de la conférence : Montreal Summit on Innovation - The Manufacturing Sector at the Conquest of the 4th Industrial Revolution ( Montréal, QC, Canada, 24 nov. 2016 )
F. Charbonneau, L. A. Hof, D. J. Abou Ziki. 2015. « Gas film stability during Spark Assisted Chemical Engraving (SACE) ». Affiche présentée lors de la conférence : Colloque annuel Plasma-Québec 2015 ( Montreal, QC, Canada, June 3-5, 2015 )
L. A. Hof, C. Escobedo, J.D. Abou Ziki, R. Wüthrich. 2015. « Additive Manufacturing (AM) through imprinting Gold nanoparticles on Glass Substrates by Spark Assisted Chemical Engraving (SACE) ». Affiche présentée lors de la conférence : 227th ECS Meeting ( Chicago, IL, USA, May 24-28, 2015 )
M. M. Rahman, L. A. Hof, B. Johnston, S. A. Khanoki, D. Pasini, R. Wüthrich. 2015. « Electro-polishing of additive manufactured porous titanium for medical implants ». Affiche présentée lors de la conférence : 227th ECS Meeting ( Chicago, IL, USA, May 24-28, 2015 )
K. Fujisaki, Ph. Couthy, R. Wüthrich, L. A. Hof, H. Bleuler. 2004. « Spark Assisted Chemical Engraving (SACE) in microfactory ». Affiche présentée lors de la conférence : Fourth International Workshop on Microfactories ( Shanghai, China, Oct. 15-17, 2004 )
L. A. Hof, Rolf Wüthrich, Hannes Bleuler, Ph. Mandin. 2004. « Physical principles and miniaturization of Spark Assisted Chemical Engraving (SACE) ». Affiche présentée lors de la conférence : Fourth International Workshop on Microfactories ( Shanghai, China, Oct. 15-17, 2004 )
Modélisation de la couverture de la peinture en poudre pour les applications de peinture industrielle automatisées
Recyclage de déchets textiles : maîtrise du procédé et développement de nouveaux débouchés
Procédé de micro-usinage électrochimique de précision pour matériaux difficiles à usiner