Sébastien Lalonde

Département de génie mécanique
Axes de recherche :
- Matériaux et fabrication
- Énergie
Expertises :
- Mécanique de la rupture
- Mécanique des câbles
- Analyse numérique avec méthodes d’éléments finis et de frontière
- Endommagement en fatigue
Publications: article
Publications: article
Publications: article
Publications: article
Publications: article
Publications: conference_item
Canadian Society for Mechanical Engineering Forum (CSME)
Publications: conference_item
Compte rendu 24ième séminaire sur la vibration des machines : ACVM, 25-27 octobre 2006
Publications: article
Publications: conference_item
12th International Conference on Fracture 2009, ICF-12
Publications: article
Publications: article
Publications: article
Publications: article
Publications: article
Publications: conference_item
12th International Conference on Multiaxial Fatigue and Fracture (ICMFF)
Publications: article
Publications: article
Publications: conference_itemau
Cours
MEC129 | Développement de produits assisté par ordinateur | (Automne 2023) |
MEC129 | Développement de produits assisté par ordinateur | (Été 2023) |
MEC528 | Éléments de machine | (Hiver 2023) |
Encadrements
Projet d'application à 15 crédits-
En codirection avec : Lalonde, Sébastien
Modélisation numérique des vibrations induites par le vent sur les très grandes portées de câbles haute tension, par Nohonet Negoue,Judicael.
Automne 2023
-
En codirection avec : Guilbault, Raynald
Modélisation de l'effet des réparations de conducteur sur la distribution des contraintes en vue d'améliorer sa résistance à la fatigue, par Youdom Yimbi,Guy Hermann.
Automne 2023
-
En codirection avec : Lalonde, Sébastien
Modélisation numérique du comportement vibratoire et évaluation de l’énergie vibratoire de conducteurs haute tension de grande portée soumis à des vibrations éoliennes, par Braun,Léo.
Hiver 2023
-
En codirection avec : Lalonde, Sébastien
Development of a Multi-Frequency Energy Generating Damper for High Voltage Conductors, par Nkiegaing,Franck.
Automne 2023
-
Modélisation de la structure toronnée des câbles haute tension dans les systèmes de motorisation électrique, par Mongrain,Alexandre.
Automne 2023
-
En codirection avec : Lalonde, Sébastien
Employing Metamaterials in Additive Manufacturing for Supplier Streamlining through Process Simulation and Validation, par Ben Abdallah,Mohamed Amine.
Automne 2023
-
En codirection avec : Langlois, Sébastien
Étude expérimentale de l'endommagement local en contact des câbles à structure toronnée, par Kared,Liticia.
Automne 2023
-
En codirection avec : Hof, Lucas Abia
Caractérisation du comportement vibratoire de matériaux auxétiques appliquée aux développements d'amortisseurs pour roulements de turbomachine, par Sidjou Nzali,Loïc Macaire.
Automne 2023
-
Modeling of Hgh Voltage Cable Outer Shell Used in Electric Drive Systems, par Pelletier,Simon.
Automne 2023
-
Stagiaire ingénierie alternateur, par Youdom Yimbi,Guy Hermann.
Automne 2023
P. H. C. Rocha, S. Langlois, S. Lalonde, J. A. Araujo, F. C. Castro. 2023. « Influence of 1350 and 6201 aluminum alloys on the fatigue life of overhead conductors – A finite element analysis ». Tribology International. vol. 186
P. H. C. Rocha, S. Langlois, S. Lalonde, J. A. Araújo, F. C. Castro. 2022. « A general life estimation method for overhead conductors based on fretting fatigue behavior of wires ». Theoretical and Applied Fracture Mechanics. vol. 121
Raynald Guilbault, Sébastien Lalonde. 2021. « Tip relief designed to optimize contact fatigue life of spur gears using adapted PSO and firefly algorithms ». SN Applied Sciences. vol. 3 , nº 1.
Amine Omrani, Sebastien Langlois, Pierre Van Dyke, Sebastien Lalonde, Sasan Sattarpanah Karganroudi, Lamine Dieng. 2021. « Fretting fatigue life assessment of overhead conductors using a clamp/conductor numerical model and biaxial fretting fatigue tests on individual wires ». Fatigue and Fracture of Engineering Materials and Structures. vol. 44 , nº 6. p. 1498-1514.
Raynald Guilbault, Sébastien Lalonde. 2019. « A stochastic prediction of roughness evolution in dynamic contact modelling applied to gear mild wear and contact fatigue ». Tribology International. vol. 140
Sébastien Lalonde, Raynald Guilbault, Sébastien Langlois. 2018. « Numerical analysis of ACSR conductor-clamp systems undergoing wind-induced cyclic loads ». IEEE Transactions on Power Delivery. vol. 33 , nº 4. p. 1518-1526.
Sébastien Lalonde, Raynald Guilbault, Sébastien Langlois. 2017. « Modeling multilayered wire strands, a strategy based on 3D finite element beam-to-beam contacts - Part II: Application to wind-induced vibration and fatigue analysis of overhead conductors ». International Journal of Mechanical Sciences. vol. 126 p. 297-307.
Sébastien Lalonde, Raynald Guilbault, Frédéric Légeron. 2017. « Modeling multilayered wire strands, a strategy based on 3D finite element beam-to-beam contacts - Part I: Model formulation and validation ». International Journal of Mechanical Sciences. vol. 126 16 p. p. 281-296.
Raynald Guilbault, Sébastien Lalonde. 2016. « Early diagnostic of concurrent gear degradation processes progressing under time-varying loads ». Mechanical Systems and Signal Processing. vol. 76-77 p. 337-352.
Raynald Guilbault, Sébastien Lalonde, Marc Thomas. 2015. « Modeling and monitoring of tooth fillet crack growth in dynamic simulation of spur gear set ». Journal of Sound and Vibration. vol. 343 p. 144-165.
Raynald Guilbault, Sebastien Lalonde, Marc Thomas. 2013. « Corrigendum to "Nonlinear damping calculation in cylindrical gear dynamic modeling" [J. Sound Vib. 331/9 (2012) 2110–2128] ». Journal of Sound and Vibration. vol. 332 , nº 20. p. 5240.
Raynald Guilbault, Sébastien Lalonde, Marc Thomas. 2012. « Nonlinear damping calculation in cylindrical gear dynamic modeling ». Journal of Sound and Vibration. vol. 331 , nº 9. p. 2110-2128.
Sébastien Lalonde, Raynald Guilbault. 2011. « Prediction of thin-rimmed gear crack propagation from a factorial design approach ». Fatigue and Fracture of Engineering Materials and Structures. vol. 34 , nº 7. p. 470-486.
Sébastien Lalonde, Raynald Guilbault. 2009. « Finite separation method : an efficient boundary element crack modeling technique ». Computational Mechanics. vol. 44 , nº 6. 17 p. p. 791-807.
P. H. C. Rocha, S. Langlois, S. Lalonde, J. A. Araujo, F. C. Castro. 2022. « Life prediction of an ACSR conductor based on the similitude with fretting fatigue tests on wires ». Communication lors de la conférence : 10th International Symposium on Fretting Fatigue (ISFF10) ( Louvain, Belgique, Sept. 19-21, 2022 )
Amine Omrani, Sébastien Langlois, Pierre Van Dyke, Sasan Sattarpanah Karganroudi, Sébastien Lalonde. 2019. « Fatigue strength evaluation for individual strands of overhead conductors using a biaxial fretting fatigue test bench ». 12th International Conference on Multiaxial Fatigue and Fracture (ICMFF) (Bordeaux, France, June 24-26, 2019) EDP Sciences.
Sébastien Lalonde, Raynald Guilbault. 2009. « Numerical characterization of thin-rimmed gear tooth bending fatigue crack propagation ». 12th International Conference on Fracture 2009, ICF-12 (Ottawa, ON, Canada, July 12-17, 2009) p. 5827-5836. Japan : International Congress on Fracture.
Sébastien Lalonde, Raynald Guilbault. 2008. « A new and efficient approach for boundary element 2D crack modeling ». Canadian Society for Mechanical Engineering Forum (CSME) (Ottawa, ON, Canada, June 5-8, 2008)
Sébastien Lalonde, Raynald Guilbault. 2006. « Dynamic analysis of spur gears by non linear modeling ». Compte rendu 24ième séminaire sur la vibration des machines : ACVM, 25-27 octobre 2006 (Montreal, QC, Canada, Oct. 25-27, 2006) p. 15-35. Calgary : ACVM.