Hakim Bouzid
Professeur
Department
Département de génie mécanique
Degrees
B.Sc. (Nottingham, G.-B.), M.Sc. (Leeds, G.-B.), Ph.D. (Polytechnique Montréal)
Office
A-1902
Email
Overview
Bouzid, Hakim
Research axes
- Énergie
- Matériaux et fabrication
- Technologies de la santé
Areas of expertise
- Étanchéité statique et dynamique
- Joints, garnitures et tresses de presse étoupe
- Analyse des contraintes
- Analyse des réservoirs sous pression
- Analyse des structures par éléments finis
- Tribologie (lubrification, frottement et usure)
- Comportement non linéaire des structures
- Plasticité, fluage et relaxation
- Sécurité et contrôle des risques industriels
Supervision
- En codirection avec : Bouzid, Hakim A.
Développement d'une méthode de conception des assemblages à brides boulonnées basée sur la flexibilité et l'étanchéité, par Beghoul,Hichem
Automne 2003 - En codirection avec : Bouzid, Hakim A.
Effet de l'expansion thermique sur la redistribution des charges dans les assemblages à brides boulonnées, par Nechache,Akli
Automne 2002
- En codirection avec : Bouzid, Hakim A.
Détermination de la largeur effective des joints d'étanchéité utilisée dans code ASME pour le calcul des brides, par Diany,Mohammed
Été 2005 - En codirection avec : Bouzid, Hakim A.
Analyse des assemblages à brides boulonnées à face plate, par Galai,Hichem
Hiver 2009 - En codirection avec : Nadeau, Sylvie
Mécanisme de la hernie discale : modélisation non-linéaire, par Prud'Homme,David
Automne 2007 - En codirection avec : Bouzid, Hakim A.
Évaluation du gradient thermique circonférentiel et son influence sur les déflexions d'un assemblage à brides boulonnées d'un échangeur de chaleur avec plusieurs passes, par Petrova,Natalia
Hiver 2010
- En codirection avec : Bouzid, Hakim A.
Effet de l'espacement des boulons sur la distribution des contraintes dans un assemblage à brides boulonnées muni d'un joint d'étanchéité, par M'Hadheb,Mustapha
Été 2005
- En codirection avec : Bouzid, Hakim A.
Modélisation du phénomène de fluage-relaxation dans les assemblages à brides boulonnées munis de joint d'étanchéité, par Nechache,Akli
Automne 2007
- En codirection avec : Bouzid, Hakim A.
Caractérisation et modélisation des garnitures de presse-étoupe, par Diany,Mohammed
Automne 2010 - En codirection avec : Bouzid, Hakim A.
Analyse des contraintes résiduelles dans les assemblages tubes-plaques à tubes dudgeonnés par pression hydraulique., par Laghzale,Nor Eddine
Automne 2009 - En codirection avec : Bouzid, Hakim A.
The effect of bolt spacing on the tightness behavior of bolted flange joints, par Do,Tan Dan
Hiver 2012 - En codirection avec : Bouzid, Hakim A.
Prédiction des fuites gazeuses et des fuites liquides dans les joints d'étanchéité micro et nanoporeux, par Grine,Lotfi
Automne 2012 - En codirection avec : Bouzid, Hakim A.
Développement d'un modèle analytique anisotrope non linéaire du disque intervertébral L5-S1, par Demers,Sébastien
Été 2015 - En codirection avec : Chatelain, Jean-François
On the Characterization of Johnson-Cook Constants : Numerical and Expérimental Study of High Speed Machining Aerospace Alloys, par Daoud,Monzer
Automne 2016 - En codirection avec : Bouzid, Hakim A.
Characterization and Modeling of Packed-stuffing Boxes, par Kazeminia,Mehdi
Automne 2016 - En codirection avec : Bouzid, Hakim A.
Analysis of Fiber Reinforced Plastic Bolted Flange Joints, par Khazraiyanvafadar,Ali
Été 2019 - En codirection avec : Bouzid, Hakim A.
CREEP and Thermal Ratcheting of Soft Materials under Compression, par Kanthabhabha Jeya,Rahul Palaniappan
Automne 2018 - En codirection avec : Bouzid, Hakim A.
Prediction of Gas and Liquid Leak Rates in Compression Packing at Room Temperature, par Aweimer,Ali Salah Omar
Automne 2019 - En codirection avec : Bouzid, Hakim A.
Stress Analysis of Finned Tubes Subjected to Die Expansion, par Zhao,Zijian
Automne 2023 - En codirection avec : Bouzid, Hakim A.
Maîtrise des risques des réservoirs sous pression, par Esouilem,Mohamed
Hiver 2024 - En codirection avec : Bouzid, Hakim A.
A Study of Parameters Affecting the Self-loosening of Bolted Joints, par Rousseau,Rashique Iftekhar
Été 2024 - En codirection avec : Hof, Lucas Abia
Corrosion Quantification of Bolted Flanged Gasketed Joints, par Hakimian,Soroosh
Été 2024 - En codirection avec : Bouzid, Hakim A.
Creep-Relaxation of Metal-to-metal Contact Bolted Flange Joints, par Iroakazi,Beatus
Hiver 2024 - En codirection avec : Bouzid, Hakim A.
A Study of the Performance of Mechanical and Hydraulic Expansion of Tube-to-Tubesheet Joints, par Pourreza Katigari,Mohammadhossein
Été 2024
- En codirection avec : Bouzid, Hakim A.
Conception d'ancrage pour éolien flottant, par Benifla,Victor
Été 2020 - En codirection avec : Fihey, Jean-Luc
Implantation d'un programme du contrôle de la qualité formelle dans une entreprise oeuvrant dans le domaine de la fabrication des appareils sous pression soudés, par Nosrat Makouee,Yashar
Été 2018
- En codirection avec : Bouzid, Hakim A.
Amélioration d'un banc d'essai de presse-étoupe et essais préliminaires de fluage à haute température des garnitures d'étanchéité en graphite expansé, par Maillé,Carl
Automne 2021 - En codirection avec : Bouzid, Hakim A.
Test rig and experimentation of packing seals used in large diameter deformed rotating drums, par Villiard,Jonathan
Automne 2010 - En codirection avec : Bouzid, Hakim A.
Amélioration de la procédure d'éclatement des joints d'étanchéité, par Benabdallah,Samir
Été 2012 - En codirection avec : Bouzid, Hakim A.
The Prediction of Liquid Leak Rates Through Packing Seals, par Bathaei,Seyed Amir Hossein
Automne 2021 - En codirection avec : Jahazi, Mohammad
Conception et fabrication d’un banc d’essai pour la mesure du coefficient de friction haute température des alliages d’aluminium, par David,Guillaume
Hiver 2021 - En codirection avec : Bouzid, Hakim A.
Stress Analysis of Bolted Flange Joints with Different Shell Connections, par Choulaei,Mohammad
Automne 2022 - En codirection avec : Bouzid, Hakim A.
Effect of Temperature on the Relaxation of Polyvinyl Chloride Flanges, par Zhao,Zijian
Été 2017 - En codirection avec : Bouzid, Hakim A.
Analytical and Finite of Element Study of Residual Stresses in the Transition Zone of Hydraulically Expended Tube-to-tubesheet Joints, par Pourreza Katigari,Mohammadhossein
Hiver 2018 - En codirection avec : Bouzid, Hakim A.
Development of a Test Bench to Study Self-Loosening of Bolted Joints, par Hasrak,Amir
Été 2018 - En codirection avec : Bouzid, Hakim A.
Étude de l'autodesserrage des assemblages boulonnés, par Fort,Valentin
Été 2018 - En codirection avec : Bouzid, Hakim A.
Caractérisation mécanique des tresses de valves à haute température, par Legault,Xavier
Automne 2018 - En codirection avec : Bouzid, Hakim A.
A Theoretical Numerical and Experimental Study of Bolted Flange Joints Subjected to Hot Torquing, par Tofighi,Ali
Hiver 2024 - En codirection avec : Bouzid, Hakim A.
Étude de l'auto-desserrage des assemblages boulonnées en composite, par Yaya Achimou,Ali
Hiver 2024 - En codirection avec : Bouzid, Hakim A.
Stress Analysis of ASME B16.5 Class 900 Bolted Flange Joints Subjected to Bolt-up and Pressure, par Alarnous,Abdul Fattah
Été 2023
- En codirection avec : Bouzid, Hakim A.
Quantification de la corrosion dans les assemblages à brides boulonnées munis de joints d'étanchéité, par Dos Santos Barreto,Rafael Renan
Hiver 2020 - En codirection avec : Bouzid, Hakim A.
Étude expérimentale du taux de fuite d'un joint en graphite flexible, par Larbi,Abou Bakr
Automne 2011 - En codirection avec : Bouzid, Hakim A.
Analyse par la méthode des éléments finis de l'influence du dudgeonnage sur les contraintes résiduelles dans une plaque à tube, par Rezzak,Nabil
Hiver 2017 - En codirection avec : Ngô, Anh Dung
Étude de l'auto-desserrage en mode de déplacement contrôlé des joints boulonnés en PEHD et en acier, par Ramzi,Youssef
Été 2023 - En codirection avec : Ngô, Anh Dung
Modélisation et analyse par éléments finis des joints à brides boulonnées en polymères renforcés de fibres de verre (PRFV), par Boutahar,Youssef
Été 2023 - En codirection avec : Bouzid, Hakim A.
Modélisation théorique des assemblages à brides boulonnées en plastique renforcé de fibres munis de joints d'étanchéité, par Cizeron,Lucas
Hiver 2019 - En codirection avec : Bouzid, Hakim A.
Analyse des contraintes dans les assemblages à brides boulonnées en composite, par Sellah,Amara
Hiver 2024 - En codirection avec : Bouzid, Hakim A.
Étude du fluage-relaxation des brides en composites, par Valentin,Hildegarde
Hiver 2021 - En codirection avec : Ngô, Anh Dung
Étude expérimentale sur l'auto-desserrage en mode de déplacement contrôlé de joint boulonné en stratifié de composite, par Jean,Fabrice
Été 2024 - En codirection avec : Ngô, Anh Dung
Auto-desserrage en mode de déplacement contrôlé de joint boulonné en métal, HDPE et en composites, par Missouma Ndzana,Gilles Arnaud
Hiver 2024
- En codirection avec : Arteau, Jean
Analyse d'un système de support latéral pour les escabeaux assurant leur stabilité lors d'une force maximale de poussée, par Garcia Romero,Jorge Ramon
Hiver 2017 - En codirection avec : Bouzid, Hakim A.
Prédiction des contraintes résiduelles dues à l'expansion par écrouissage à froid de trous dans les plaques d'alliage d'aluminium, par Touahri,Hacène
Hiver 2018
Publications
- Sylvie Nadeau, Stéphane Hallé, Jean Arteau, B. Ateme-Nguema, A. Badri, Christian Belleau, Hakim Bouzid, M. Debia, B. Emami-Mehrgani, Frédéric Laville, François Morency, Anh Dung Ngô, Yvan Petit, Jérémie Voix. 2013 « Quand la vulgarisation scientifique reprend ses lettres de noblesse: le cas de l'EREST ». Affiche présentée lors de la conférence : Journée Découverte, École de technologie supérieure (Montréal, QC, Canada, 13 mars 2013)
- Hakim Bouzid, Nor Eddine Laghzale. 2009 « Analytical modeling of tube-to-tubesheet joints sujected to plasticity and creep ». Affiche présentée lors de la conférence : 6th CNS International Steam Generator Conference (Toronto, Canada, Nov. 8-11, 2009)
- Anh Dung Ngô, Stéphane Hallé, Sylvie Nadeau, P. Déry, P. Doucet, R. Gilbert, L. Gratton, Jean Arteau, Hakim Bouzid, J. Brousseau, P. Dessureault, F. Gauthier, Frédéric Laville, P. Le Huy, Françoise Marchand, Yvan Petit, D. Rodier, Marc Thomas. 2007 « Le défi de l'intégration des connaissances en santé et en sécurité du travail - génie mécanique ». Travail et Santé vol. 23 , nº 4. p. 36-39
- Meriem Belhaou, Nor Eddine Laghzale, Abdel-Hakim Bouzid. 2024 « Residual stresses in autofrettaged functionally graded pressurized thick cylinders ». International Journal of Pressure Vessels and Piping vol. 208
- Khaled Benfriha, Oussama Adjoul, Abdel-Hakim Bouzid, Peter Wardle. 2024 « Interactive design on the product life cycle costs: a case study ». International Journal on Interactive Design and Manufacturing vol. 18 , nº 2. p. 837-846
- Abdel-Hakim Bouzid, Sofiane Bouzid, Khaled Benfriha. 2024 « On the strength and tightness of ASME B16.5 and B16.47 series a standard flanges ». Journal of Pressure Vessel Technology vol. 146 , nº 1
- Soorosh Hakimian, Abdel-Hakim Bouzid, Lucas A. Hof. 2024 « An improved fixture to quantify corrosion in bolted flanged gasketed joints ». Journal of Pressure Vessel Technology vol. 146 , nº 1
- Soorosh Hakimian, Abdel-Hakim Bouzid, Lucas A. Hof. 2024 « Effect of gap size on flange face corrosion ». Materials and Corrosion-Werkstoffe Und Korrosion
- Soroosh Hakimian, Abdel-Hakim Bouzid, Lucas A. Hof. 2024 « Corrosion failures of flanged gasketed joints: A review ». Journal of Advanced Joining Processes vol. 9
- Rashique Iftekhar Rousseau, Abdel-Hakim Bouzid, Zijian Zhao. 2024 « On the re-evaluation of the clamped members stiffness of bolted joints ». Transactions of the Canadian Society for Mechanical Engineering vol. 48 , nº 1. p. 75-83
- Zijan Zhao, Abdel-Hakim Bouzid. 2024 « A study on the contact quality improvement of fin to tube assemblies ». Transactions of the Canadian Society for Mechanical Engineering
- Abdel-Hakim Bouzid, Shubhra Kanti Das. 2023 « Long-term performance of semimetallic gaskets ». Journal of Nuclear Engineering and Radiation Science vol. 9 , nº 3
- Sofiane Bouzid, Abdel-Hakim Bouzid, Anh-Dung Ngo. 2023 « Stress analysis of ASME section X flanges using classical lamination theory ». Journal of Pressure Vessel Technology vol. 145 , nº 3
- Quentin Charrier, Nisar Hakam, Khaled Benfriha, Vincent Meyrueis, Cyril Liotard, Abdel-Hakim Bouzid, Améziane Aoussat. 2023 « Towards the augmentation of digital twin performance ». Sensors vol. 23 , nº 22
- Soroosh Hakimian, Shamim Pourrahimi, Abdel-Hakim Bouzid, Lucas A. Hof. 2023 « Application of machine learning for the classification of corrosion behavior in different environments for material selection of stainless steels ». Computational Materials Science vol. 228
- Shamim Pourrahimi, Soroosh Hakimian, Abdel-Hakim Bouzid, Lucas A. Hof. 2023 « On the use of machine learning algorithms to predict the corrosion behavior of stainless steels in lactic acid ». Metals vol. 13 , nº 8
- Dinu Thomas Thekkuden, Abdel-Hamid Ismail Mourad, Abdel-Hakim Bouzid, Muhammad M. Sherif. 2023 « Investigation of expansion percentages and groove inclusions on the performance of welded, expanded, welded-expanded tube-to-tubesheet joints ». Journal of Materials Research and Technology vol. 22. p. 2078-2092
- Zijan Zhao, Abdel-Hakim Bouzid, Linbo Zhu. 2023 « A method of evaluating the driving force and stresses during tube die expansion ». Journal of Pressure Vessel Technology vol. 145 , nº 2
- Samiha Zrinej, Nor Eddine Laghzale, Hakim A. Bouzid. 2023 « Analytical modeling of shrink-fitted FGM thick-walled cylinders ». International Journal of Engineering Research in Africa vol. 66. p. 61-74
- Ali Salah Omar Aweimer, Abdel-Hakim Bouzid. 2022 « On the modeling of gas and liquid leaks through packed glands ». Journal of Pressure Vessel Technology vol. 144 , nº 5
- Meriem Belhaou, Nor Eddine Laghzale, Hakim Bouzid. 2022 « Analysis of plastically deformed functionally graded pressurized thick cylinder ». Arab Journal of Basic and Applied Sciences vol. 29 , nº 1. p. 372-381
- Meriem Belhaou, Nor Eddine Laghzale, Hakim Bouzid. 2022 « Residual stress in ceramic–metal tubes: Elastic–ideally plastic model analysis ». International Journal of Engineering Trends and Technology vol. 70 , nº 9. p. 400-410
- Mohamed Esouilhem, Abdel-Hakim Bouzid, Sylvie Nadeau. 2022 « Pressure vessels and piping accident analysis and prevention: A case study in Canada ». International Journal of Safety and Security Engineering vol. 12 , nº 1. p. 105-114
- Soroosh Hakimian, Lucas Hof, Hakim A. Bouzid. 2022 « Investigation of corrosion in bolted flanged joints using a novel experimental setup ». ECS Meeting Abstracts vol. MA2022-01 , nº 16. p. 990
- Amal Mouâa, Nor Eddine Laghzale, Abdel-Hakim Bouzid. 2022 « Creep analysis of plastically deformed shrink-fitted joints ». Arabian Journal for Science and Engineering vol. 47. p. 8199-8210
- Dinu Thomas Thekkuden, Abdel-Hamid Ismail Mourad, Tholkappiyan Ramachandran, Abdel-Hakim Bouzid, Ravi Kumar, Ahmed Alzamly. 2022 « Combined effect of tungsten inert gas welding and roller expansion processes on mechanical and metallurgical characteristics of heat exchanger tube-to-tubesheet joints ». Journal of Materials Research and Technology-Jmr&T vol. 21. p. 4724-4744
- Zijian Zhao, Abdel-Hakim Bouzid, Nor Eddine Laghzale. 2022 « Analysis of stresses and strains in stainless steel 316 L tubes subjected to die expansion ». Journal of Pressure Vessel Technology vol. 144 , nº 5
- Khaled Benfriha, Chawki El-Zant, Quentin Charrier, Abdel-Hakim Bouzid, Peter Wardle, Idir Belaidi, Stéphane Loubère, Nooshin Ghodsian, Améziane Aoussat. 2021 « Development of an advanced MES for the simulation and optimization of industry 4.0 process ». International Journal for Simulation and Multidisciplinary Design Optimization vol. 12
- Abdel-Hakim Bouzid, Hacène Touahri, Khaled Benfriha. 2021 « Analytical solution of aluminum alloy plates with holes subjected to cold expansion with reverse yielding ». Journal of Pressure Vessel Technology vol. 143 , nº 4
- Abdel-Hakim Bouzid, Ali Khazraiyan Vafadar, Anh Dung Ngô. 2021 « On the modeling of anisotropic fiber-reinforced polymer flange joints ». Journal of Pressure Vessel Technology vol. 143 , nº 6
- Adbel-Hakim Bouzid. 2021 « A study on liquid leak rates in packing seals ». Applied Sciences vol. 11 , nº 4
- Amal Mouaa, Nor Eddine Laghzale, Abdel-Hakim Bouzid. 2021 « Analytical modelling of interference fit joints with power law strain-hardening behavior ». International Review on Modelling and Simulations vol. 14 , nº 1. p. 24-31
- Dinu Thomas Thekkuden, Abdel-Hamid Ismail Mourad, Abdel-Hakim Bouzid. 2021 « Failures and leak inspection techniques of tube-to-tubesheet joints: A review ». Engineering Failure Analysis vol. 130
- Linbo Zhu, Abdel-Hakim Bouzid, Jun Hong. 2021 « A method to reduce the number of assembly tightening passes in bolted flange joints ». Journal of Manufacturing Science and Engineering vol. 143 , nº 12
- Mikel Armentia, Mikel Abasolo, Ibai Coria, Abdel-Hakim Bouzid. 2020 « On the use of a simplified slip limit equation to predict screw self-loosening of dental implants subjected to external cycling loading ». Applied Sciences vol. 10 , nº 19
- Ali Salah Omar Aweimer, Abdel-Hakim Bouzid, Zijian Zhao. 2020 « Leakage estimate in nonuniformly compressed packing rings ». Journal of Nuclear Engineering and Radiation Science vol. 6 , nº 2
- M. Esouilem, H. A. Bouzid, S. Nadeau. 2020 « Frequency failure causes analysis of pressure vessel and piping equipment: case study of the Alberta Petrochemical Industry ». ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering vol. 6 , nº 4
- Rahul Palaniappan Kanthabhabha Jeya, Zijian Zhao, Abdel-Hakim Bouzid. 2020 « Creep-relaxation modeling of HDPE and polyvinyl chloride bolted flange joints ». Journal of Pressure Vessel Technology vol. 142 , nº 5
- Ali Khazraiyan Vafadar, Abdel-Hakim Bouzid, Anh Dung Ngô. 2020 « Analytical modeling of FRP hubbed flanges ». International Journal of Pressure Vessels and Piping vol. 188
- Ali Salah Omar Aweimer, Abdel-Hakim Bouzid. 2019 « Evaluation of interfacial and permeation leaks in gaskets and compression packing ». Journal of Nuclear Engineering and Radiation Science vol. 5 , nº 1
- Ali Salah Omar Aweimer, Abdel-Hakim Bouzid, Mehdi Kazeminia. 2019 « Predicting leak rate through valve stem packing in nuclear applications ». Journal of Nuclear Engineering and Radiation Science vol. 5 , nº 1
- Abdel-Hakim Bouzid, Ali Salah Omar Aweimer. 2019 « On the use of gas flow models to predict leak rates through sheet gasket materials ». Journal of Pressure Vessel Technology vol. 141 , nº 5
- Abdel-Hakim Bouzid, Mohammad Pourreza. 2019 « Analysis of residual stresses in the transition zone of tube-to-tubesheet joints ». Journal of Pressure Vessel Technology vol. 141 , nº 4
- Valentin Fort, Abdel-Hakim Bouzid, Michel Gratton. 2019 « Analytical modeling of self-loosening of bolted joints subjected to transverse loading ». Journal of Pressure Vessel Technology vol. 141 , nº 3
- Rahul Palaniappan Kanthabhabha Jeya, Abdel-Hakim Bouzid. 2019 « Effect of thermal ratcheting on the mechanical properties of Teflon and fiber based gasket materials ». Journal of Applied Polymer Science vol. 136 , nº 13
- Rahul Palaniappan Kanthabhabha Jeya, Abdel-Hakim Bouzid. 2019 « Influence of thermal ratcheting on the creep and mechanical properties of high-density polyethylene ». Journal of Engineering Materials and Technology vol. 141 , nº 4
- Abdel-Hakim Bouzid, L.inbo Zhu. 2018 « A study of neighbouring tube expansion effect on the residual contact pressure of tube-to-tubesheet joints ». International Journal of Pressure Vessels and Piping vol. 165. p. 185-192
- Ibai Coria, Iñigo Morales Martín, Abel-Hakim Bouzid, Iker Heras, Mikel Abasolo. 2018 « Efficient assembly of bolted joints under external loads using numerical FEM ». International Journal of Mechanical Sciences vol. 142-143. p. 575-582
- Rahul Kanthabhabha Jeya, Abdel-Hakim Bouzid. 2018 « Compression creep and thermal ratcheting behavior of High Density Polyethylene (HDPE) ». Polymers vol. 10 , nº 2
- Mehdi Kazeminia, Abdel-Hakim Bouzid. 2018 « Leak prediction through porous compressed packing rings: A comparison study ». International Journal of Pressure Vessels and Piping vol. 166. p. 1-8
- Linbo B. Zhu, Abdel-Hakim Bouzid, Jun Hong, Zaoxiao Zhang. 2018 « Elastic interaction in bolted flange joints: An analytical model to predict and optimize bolt load ». Journal of Pressure Vessel Technology vol. 140 , nº 4. p. 10
- Linbo Zhu, Abdel-Hakim Bouzid, Jun Hong. 2018 « Analytical evaluation of elastic interaction in bolted flange joints ». International Journal of Pressure Vessels and Piping vol. 165. p. 176-184
- M. Daoud, J. F. Chatelain, A. Bouzid. 2017 « Effect of rake angle-based Johnson-Cook material constants on the prediction of residual stresses and temperatures induced in Al2024-T3 machining ». International Journal of Mechanical Sciences vol. 122. p. 392-404
- Sébastien Demers, Sylvie Nadeau, Abdel-Hakim Bouzid. 2017 « Analytical evaluation of stresses and displacements of an intervertebral disc ». Journal of Biomechanical Science and Engineering vol. 12 , nº 3
- Palaniappan Rahul Kanthabhabha Jeya, Abdel-Hakim Bouzid. 2017 « Creep and thermal ratcheting characterization of polytetrafluoroethylene-based gasket materials ». Advanced Materials proceeding vol. 2 , nº 10. p. 609-614
- Mehdi Kazeminia, Hakim Bouzid. 2017 « Evaluation of leakage through graphite-based compression packing rings ». Journal of Pressure Vessel Technology vol. 139 , nº 1
- Linbo Zhu, Abdel-Hakim Bouzid, Jun Hong. 2017 « Numerical and experimental study of elastic interaction in bolted flange joints ». Journal of Pressure Vessel Technology vol. 139 , nº 2
- Hocine Attoui, Abdel-Hakim Bouzid, Jerry A. Waterland. 2016 « On the buckling of spiral wound gaskets ». Journal of Pressure Vessel Technology vol. 138 , nº 4
- Abdel-Hakim Bouzid, Mehdi Kazeminia. 2016 « Effect of reverse yielding on the residual contact pressure in tube-to-tubesheet joints ». Journal of Pressure Vessel Technology vol. 138 , nº 6
- Abdel-Hakim Bouzid, Nor-Eddine Laghzale. 2016 « Analytical modeling of tube-to-tubesheet joints subjected to plastic deformation and creep ». Journal of Advanced Mechanical Design, Systems and Manufacturing vol. 10 , nº 4
- Abdel-Hakim Bouzid, Abdel-Hamid I. Mourad, Aly El Domiaty. 2016 « Influence of Bauschinger effect on the residual contact pressure of hydraulically expanded tube-to-tubesheet joints ». International Journal of Pressure Vessels and Piping vol. 146. p. 1-10
- Sébastien Demers, Abdel-Hakim Bouzid, Sylvie Nadeau. 2016 « Effect of Sharpey's fibers on the stress distribution in the anulus fibrosus of an intervertebral disc subjected to compression ». International Review on Modelling and Simulations vol. 9 , nº 6. p. 414-426
- Sébastien Demers, Sylvie Nadeau, Abdel-Hakim Bouzid. 2016 « Anisotropic multishell analytical modeling of an intervertebral disk subjected to axial compression ». Journal of Biomechanical Engineering vol. 138 , nº 4
- Noreddine Laghzale, Hakim Bouzid. 2016 « Analytical modelling of elastic-plastic interference fit joints ». International Review on Modelling and Simulations vol. 9 , nº 3. p. 191-199
- A. H. Bouzid, A. H. I. Mourad, A. El Domiaty. 2015 « Impact of Bauschinger effect on the residual contact pressure of hydraulically expanded tube-to-tubesheet joints ». Procedia Engineering vol. 130. p. 176-192
- Hakim Bouzid, S. Benabdallah. 2015 « Characterization of PTFE-based gaskets at high temperature ». Journal of Pressure Vessel Technology vol. 137 , nº 3
- M. Daoud, J. F. Chatelain, A. Bouzid. 2015 « Effect of rake angle on Johnson-Cook material constants and their impact on cutting process parameters of Al2024-T3 alloy machining simulation ». International Journal of Advanced Manufacturing Technology vol. 81 , nº 9-12. p. 1987-1997
- M. Daoud, W. Jomaa, J. F. Chatelain, A. Bouzid. 2015 « A machining-based methodology to identify material constitutive law for finite element simulation ». International Journal of Advanced Manufacturing Technology vol. 77 , nº 9-12. p. 2019-2033
- Mehdi Kazeminia, Abdel-Hakim Bouzid. 2015 « Prediction of gas flow in compressible and low permeability porous media ». Journal of Fluid Science and Technology vol. 10 , nº 2
- Mehdi Kazeminia, Hakim Bouzid. 2015 « Stress analysis of packed stuffing-boxes ». Journal of Pressure Vessel Technology vol. 137 , nº 5
- Abdel-Hakim Bouzid. 2014 « Comparative study of bolt spacing formulas used in bolted joint designs ». International Journal of Pressure Vessels and Piping vol. 120-121 , nº 1. p. 47-54
- Adbel-Hakim Bouzid. 2014 « Failure analysis of an aluminium extension portable ladder ». Materials Sciences and Applications vol. 5 , nº 9. p. 674-684
- Tan Dan Do, Abdel-Hakim Bouzid, Thien-My Dao. 2014 « Development of a new bolt spacing formula ». Journal of Pressure Vessel Technology vol. 136 , nº 1
- Mehdi Kazemina, Abdel-Hakim Bouzid. 2014 « Effect of tapered housing on the axial stress distribution in a stuffing box packing ». International Journal of Advancements in Mechanical and Aeronautical Engineering vol. 1 , nº 3. p. 115-120
- Sébastien Demers, Abdel-Hakim Bouzid, Sylvie Nadeau. 2013 « On the modeling of an intervertebral disc using a novel large deformation multi-shell approach ». Journal of Biomechanical Engineering vol. 135 , nº 5
- Lotfi Grine, Abdel-Hakim Bouzid. 2013 « Analytical and experimental studies of liquid and gas leaks through micro and nano-porous gaskets ». Materials Sciences and Applications vol. 4 , nº 8A. p. 32-44
- Lotfi Grine, Abdel-Hakim Bouzid. 2013 « Prediction of leak rates through porous gaskets at high temperature ». Journal of Pressure Vessel Technology vol. 135 , nº 2
- Nazim Ould-Brahim, Abdel-Hakim Bouzid, Vladimir Brailovski. 2013 « On the use of shape memory alloy studs to recover load loss in bolted joints ». Journal of Pressure Vessel Technology vol. 135 , nº 2
- Mohammed Diany, Abdel-Hakim Bouzid. 2012 « Creep constitutive law of packing materials based on relaxation tests ». Journal of Tribology vol. 134 , nº 1
- Tan Dan Do, Hakim Bouzid, Thien-My Dao. 2012 « On the Use of Theory of Rings on Nonlinear Elastic Foundation to Study the Effect of Bolt Spacing in Bolted Flange Joints ». Journal of Pressure Vessel Technology vol. 134 , nº 6
- Natalia Petrova, Abdel-Hakim Bouzid. 2012 « Deflections of a multipass shell-and-tube heat exchanger bolted joint subjected to nonaxisymmetric thermal loading ». Journal of Pressure Vessel Technology vol. 134 , nº 1
- Hakim Bouzid, Hichem Galai. 2011 « A new approach to model bolted flange joints with full face gaskets ». Journal of Pressure Vessel Technology vol. 133 , nº 2
- S. Demers, Sylvie Nadeau, Abdel-Hakim Bouzid. 2011 « Étude analytique des zones critiques du disque intervertébral L5-S1 soumis à une compression quasi statique ». Travail et Santé vol. 27 , nº 4. p. 23
- Mohammed Diany, Hakim Bouzid. 2011 « An experimental-numerical procedure for stuffing box packing characterization and leak tests ». Journal of Tribology vol. 133 , nº 1
- Tan Dan Do, Hakim Bouzid, Thien-My Dao. 2011 « Effect of bolt spacing on the circumferential distribution of the gasket contact stress in bolted flange joints ». Journal of Pressure Vessel Technology vol. 133 , nº 4
- Lotfi Grine, Hakim Bouzid. 2011 « Correlation of gaseous mass leak rates through micro- and nanoporous gaskets ». Journal of Pressure Vessel Technology vol. 133 , nº 2
- Lotfi Grine, Hakim Bouzid. 2011 « Liquid leak predictions in micro- and nanoporous gaskets ». Journal of Pressure Vessel Technology vol. 133 , nº 5
- Hakim Bouzid, Akli Nechache. 2010 « The modelling of bolted flange joints used with disc springs and tube spacers to reduce relaxation ». International Journal of Pressure Vessels and Piping vol. 87 , nº 12. p. 730-736
- Hichem Galai, Hakim Bouzid. 2010 « Analytical modeling of flat face flanges with metal-to-metal contact beyond the bolt circle ». Journal of Pressure Vessel Technology vol. 132 , nº 6. p. 0612071-0612078
- Nor Eddine Laghzale, Hakim Bouzid. 2010 « Effect of creep on the residual stresses in tube-to-tubesheet joints ». Journal of Pressure Vessel Technology vol. 132 , nº 6. p. 0612101-0612106
- Hakim Bouzid. 2009 « On the effect of external bending loads in bolted flange joints ». Journal of Pressure Vessel Technology vol. 131 , nº 2
- Mohammed Diany, Hakim Bouzid. 2009 « Analytical evaluation of stresses and displacements of stuffing-box packing based on a flexibility analysis ». Tribology International vol. 42 , nº 6. p. 980-986
- Mohammed Diany, Hakim Bouzid. 2009 « Short term relaxation modeling of valve stem packings ». Journal of Tribology vol. 131 , nº 3
- Nor Eddine Laghzale, Hakim Bouzid. 2009 « Analytical modeling of hydraulically expanded tube-to-tubesheet joints ». Journal of Pressure Vessel Technology vol. 131 , nº 1
- Nor Eddine Laghzale, Hakim Bouzid. 2009 « Theoretical analysis of hydraulically expanded tube-to-tubesheet joints with linear strain hardening material behavior ». Journal of Pressure Vessel Technology vol. 131 , nº 6
- Sylvie Nadeau, Hakim Bouzid, David Prud’homme. 2008 « Étude du mécanisme lésionnel de la hernie discale : modélisation du comportement élastique non linéaire ». Revue Internationale sur l’Ingénierie des Risques Industriels vol. 1 , nº 1. p. 46-64
- Akli Nechache, Abdel-Hakim Bouzid. 2008 « On the use of plate theory to evaluate the load relaxation in bolted flanged joints subjected to creep ». International Journal of Pressure Vessels and Piping vol. 85 , nº 7. p. 486-497
- Akli Nechache, Abdel-Hakim Bouzid. 2008 « The effect of cylinder and hub creep on the load relaxation in bolted flanged joints ». Journal of Pressure Vessel Technology vol. 130 , nº 3. p. 031211 (9 p.)
- Akli Nechache, Abdel-Hakim Bouzid. 2007 « Creep analysis of bolted flange joints ». International Journal of Pressure Vessels and Piping vol. 84 , nº 3. p. 185-194
- A. Bouzid, M. Diany, M. Derenne. 2006 « Determination of gasket effective width for the ASME proposed flange design rules ». Welding Research Council Bulletin , nº 515. p. 1-43
- O. Sakr, A. Bouzid, M. Derenne. 2006 « 3D-finite element modelling of bolted flanged joints subjected to external bending loads ». Welding Research Council Bulletin , nº 516. p. 1-56
- O. Sakr, A. Bouzid, M. Derenne. 2006 « Development of a transducer for measuring gasket contact stress in bolted flanged joints ». Welding Research Council Bulletin , nº 516. p. 57-85
- Hakim Bouzid, A. Nechache. 2005 « An analytical solution for evaluating gasket stress change in bolted flange connections subjected to high temperature loading ». Journal of Pressure Vessel Technology vol. 127 , nº 4. p. 414-421
- Hakim Bouzid, A. Nechache. 2005 « Thermally induced deflections in bolted flanged connections ». Journal of Pressure Vessel Technology vol. 127 , nº 4. p. 394-401
- Luc Marchand, Michel Derenne, Olivier Sakr, Hakim Bouzid. 2005 « Long term pressurized graphite gasketed joint tests ». Welding Research Council Bulletin , nº 507. p. 1-14
- Abdel-Hakim Bouzid, Henri Champliaud. 2004 « Contact stress evaluation of nonlinear gaskets using dual kriging interpolation ». Journal of Pressure Vessel Technology vol. 126 , nº 4. p. 445-450
- Hakim Bouzid, Michel Derenne. 2004 « Effect of gasket width and gasket diameter on tightness performance, gasket constants and emissions : an exploratory experimental investigation ». Welding Research Council Bulletin , nº 496. p. 24-38
- Hakim Bouzid, Michel Derenne, Yves Birembaut. 2004 « Effect of gasket width on tightness performance gasket constants and emissions ». Welding Research Council Bulletin , nº 484. p. 39-50
- Hakim Bouzid, Michel Derenne, Marwan El-Rich. 2004 « Effect of flange rotation and gasket width on leakage behavior of bolted flanged joints ». Welding Research Council Bulletin , nº 496. p. 1-23
- Hakim Bouzid, Michel Derenne, Luc Marchand. 2003 « Long duration mechanical performance of PTFE based gasket materials ». Welding Research Council Bulletin , nº 484. p. 12-22
- O. Sakar, A. Bouzid, M. Derenne, L. Marchand, U. Muzzo. 2003 « Gasketed joint emissions and leakage : WRC Bulletin 484 - August 2003 ». Welding Research Council, Progress Reports vol. 58 , nº 11-12
- Olivier Sakr, Hakim Bouzid, Michel Derenne, Luc Marchand. 2003 « Correlation between PPMV and mass leakage rate of gasketing products ». Welding Research Council Bulletin , nº 484. p. 1-11
- Yves Birembaut, Thierry Ledauphin, Vincent Masi, Hakim Bouzid, Michel Derenne, Pascal Martelli-Garon. 2002 « Part 1: The effects of bending moments on bolted gasketed joints ». Welding Research Council Bulletin , nº 473. p. 1-17
- Abdel-Hakim Bouzid, Michel Derenne. 2002 « Analytical modeling of the contact stress with nonlinear gaskets ». Journal of Pressure Vessel Technology vol. 124 , nº 1. p. 47-53
- Abdel-Hakim Bouzid, Akli Nechache, Warren Brown. 2002 « The effect of steady state thermal loading on the deflections of a flanged joint with a cover plate ». Welding Research Council, Progress Reports vol. 57 , nº 7-8. p. 99-108
- Abdel-Hakim Bouzid, Michel Derenne, L. Marchand, J. R. Payne. 2001 « Service temperature characterization of polytetrafluoroethylene-based gaskets ». Journal of Testing and Evaluation vol. 29 , nº 5. p. 442-452
- N. Mammeri, d. L. Piron, Hakim A. Bouzid, Michel Derenne, Luc Marchand, Yves Birembaut. 2000 « Corrosion quantification test for flanges with graphite-based gaskets ». Materials Performance vol. 39 , nº 4. p. 64-69
- A. Bouzid, A. Chaaban. 1997 « An accurate method of evaluating relaxation in bolted flanged connections ». Journal of Pressure Vessel Technology vol. 119 , nº 1. p. 10-17
- A. Bouzid, A. Chaaban, A. Bazergui. 1995 « Effect of gasket creep-relaxation on the leakage tightness of bolted flanged joints ». Journal of Pressure Vessel Technology vol. 117 , nº 1. p. 71-78
- A. Bouzid, A. Chaaban. 1993 « Flanged joint analysis: a simplified method based on elastic interaction ». Transactions of the Canadian Society for Mechanical Engineering vol. 17 , nº 2. p. 181-196
- H. Bouzid, J. P. Kenné, S. Nadeau, T. Gowings. 2015 « Chapter 2: Case study : Designing a log splitter ».
- H. Bouzid, S. Nadeau, J. P. Kenné. 2015 « Chapter 1: Case study : Gasket test rig ».
- H. Bouzid, S. Nadeau, J. P. Kenné, C. Giner-Morency. 2015 « Chapter 4: Case study : Designing a hydraulic car lift for small auto repair shops ».
- H. Bouzid, S. Nadeau, J. P. Kenné, T. Gowings, C. Giner-Morency. 2015 « Chapter 5: Case study : Designing a boom lift ».
- J. P. Kenné, H. Bouzid, S. Nadeau, C. Giner-Morency. 2015 « Chapter 14: Case study : Designing a lift truck ».
- J. P. Kenné, H. Bouzid, S. Nadeau, C. Giner-Morency. 2015 « Chapter 6: Case study : Designing an aerial work platform vehicle ».
- J. P. Kenné, S. Nadeau, H. Bouzid, C. Giner-Morency. 2015 « Chapter 12: Case study: automated overhead crane ».
- S. Nadeau, H. Bouzid, J. P. Kenné, C. Giner-Morency. 2015 « Chapter 13: Designing an airplane baggage belt loader ».
- Hakim Bouzid, Jean-Pierre Kenné, Sylvie Nadeau. 2010 « Case study : designing a log splitter ».
- Hakim Bouzid, Sylvie Nadeau, Jean-Pierre Kenné. 2010 « Case study : designing a boom lift ».
- Hakim Bouzid, Sylvie Nadeau, Jean-Pierre Kenné. 2010 « Case study : designing a hydraulic car lift for small auto repair shops ».
- Hakim Bouzid, Sylvie Nadeau, Jean-Pierre Kenné. 2010 « Case study : gasket test rig ».
- Jean-Pierre Kenné, Hakim Bouzid, Sylvie Nadeau. 2010 « Case study : designing a lift truck ».
- Jean-Pierre Kenné, Hakim Bouzid, Sylvie Nadeau. 2010 « Case study : designing an aerial work platform vehicle ».
- Jean-Pierre Kenné, Sylvie Nadeau, Hakim Bouzid. 2010 « Case study : automated overhead crane ».
- Sylvie Nadeau, Hakim Bouzid, Jean-Pierre Kenné. 2010 « Case study : designing an airplane baggage belt loader ».
- Hakim A. Bouzid. 2022 « On the self-loosening of bolted joints ». Communication lors de la conférence : ASME Bolted Joint Reliability Symposium (Houston, TX, USA, Oct. 26-27, 2022)
- Hakim A. Bouzid, Sofiane Bouzid, Anh Dung Ngo. 2022 « On the tightness and strength of ASME section X FRP Flanges ». Communication lors de la conférence : ASME Bolted Joint Reliability Symposium (Houston, TX, USA, Oct. 26-27, 2022)
- Soorosh Hakimian, Hakim A. Bouzid, Lucas Hof. 2022 « A study on the influence of operational factors on the flange face corrosion using a novel experimental test bench ». Communication lors de la conférence : ASME Bolted Joint Reliability Symposium (Houston, TX, USA, Oct. 26-27, 2022)
- Rashique Iftekhar Rousseau, Hakim A. Bouzid. 2022 « On the stiffness of bolts and clamped members ». Communication lors de la conférence : ASME Bolted Joint Reliability Symposium (Houston, TX, USA, Oct. 26-27, 2022)
- S. Demers, Sylvie Nadeau, Abdel-Hakim Bouzid. 2011 « Une approche analytique pour la modélisation réaliste du mécanisme lésionnel de la hernie discale ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels (Montréal, QC, Canada, 10 mars 2011)
- Mohammed Diany, Hakim Bouzid. 2010 « Caractérisation mécanique des garnitures de presse-étoupe ». Communication lors de la conférence : VI ième Journées d'Études Techniques 2010 (JET) (Marrakech, Maroc, 5-7 mai 2010)
- Nor Eddine Laghzale, Hakim Bouzid, A. El Gherrad. 2010 « Étude des effets de l'écrouissage et du fluage sur la pression résiduelle de contact dans les joints tubes-plaques tubulaires ». Communication lors de la conférence : VI ième Journées d'Études Techniques 2010 (JET) (Marrakech, Maroc, 5-7 mai 2010)
- Sébastien Demers, Hakim Bouzid, Sylvie Nadeau. 2009 « Étude du mécanisme lésionnel de la hernie discale : une approche analystique de modélisation de la hernie discale ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels (Montréal, QC, Canada, 10 déc. 2009)
- Mohammed Diany, Hakim Bouzid. 2009 « Modélisation numérique des garnitures de valves ». Communication lors de la conférence : Colloque International sur les Méthodes Mathématiques et Numériques en Mécaniques des Fluides - CIMMNMF (Errachidia, Maroc, 28-29 avril 2009)
- Walter Lee, Hakim Bouzid, James Huang. 2009 « Qualification of gasket performance for vacuum applications ». Communication lors de la conférence : VSP Technologies "Sealing Technology Exposition" (Prince George, VA, USA, Dec. 2, 2009)
- Hakim Bouzid, N. Laghzale. 2008 « An analytical solution of hydraulicaly expanded tube-to-tubesheet joints with linear strain hardening material behaviour ». Communication lors de la conférence : Third International Conference on Engineering Failure Analysis (ICEFA-III) (Barcelona, Spain, July 13-16, 2008)
- W. Lee, Hakim Bouzid, J. Huang. 2008 « Effect of HOBT test parameters on expanded PTFE gaskets ». Communication lors de la conférence : ASME Pressure Vessels and Piping Conference (PVP) (Chicago, IL, USA, July 27-31, 2008)
- Hakim Bouzid. 2005 « Bolted flanged joint flexibility analysis ». Communication lors de la conférence : PVRC Conference on Best Practices for Flange Assembly and Maintenance (PVRC-WRC) (New Orleans, LA, USA, May 23-25, 2005)
- O. Morin, Henri Champliaud, F. Duchaine, Hakim Bouzid. 2003 « Krigeage du comportement des joints d'étanchéité au chargement et au déchargement ». Communication lors de la conférence : 71e Congrès de l'ACFAS (Rimouski, QC, Canada, 19-23 mai 2003)
- A. Bouzid, J. R. Payne. 2000 « FEM Studies at TTRL and ÉTS ». Communication lors de la conférence : ASTM Committee F03 Gaskets Meeting : Technology Session (Orlando, FL, USA, Oct. 24-26, 2000)
- G .L. Hollinger, K. H. Hsu, J. R. Payne, M. Derenne, A. Bouzid, L. Marchand, R. Mueller, J. Waterland, R. Winter. 1999 « A look at today’s gasket evaluation technology ». Communication lors de la conférence : 1st International Conference on Sealing Technology and Plant Leakage Reduction (ICSTPLRL-99) (Charlotte, NC, USA, Nov., 1999)
- Abdel-Hakim Bouzid, Sofiane Bouzid. 2023 « Integrity and leak tightness of ASME B.16.5 and B.16.47 flanges used in nuclear piping systems ».
- Abdel-Hakim Bouzid, Sofiane Bouzid, Khaled Benfriha. 2023 « Effect of bolt-up stress level on the strength of ASME B16.5 and B16.47 standard flanges ».
- Soroosh Hakimian, Abdel-Hakim Bouzid, Lucas A. Hof. 2023 « The effects of fluid working conditions on flange face corrosion ».
- Oussama Adjoul, Khaled Benfriha, Brahim Mahiddini, Abdel-Hakim Bouzid, Yacine Benabid. 2022 « New approach for the conjoint optimization of the design and manufacturing by integration of production costs ».
- Sofiane Bouzid, Abdel-Hakim Bouzid, Anh Dung Ngô. 2022 « A study of the strength of ASME section X FRP flanges ».
- Sofiane Bouzid, Abdel-Hakim Bouzid, Anh Dung Ngô. 2022 « Stress analysis of ASME section X flanges using classical lamination theory ».
- Soroosh Hakimian, Lucas A. Hof, Hakim A. Bouzid. 2022 « An improved fixture to quantify corrosion in bolted flanged gasketed joints subjected to service conditions ».
- Linbo Zhu, Hu Pan, Yilong Yang, Abdel-Hakim Bouzid, Jun Hong. 2022 « Effect of the bending stiffness of bolted flange joints on the dynamics of aero-engine rotors ».
- Linbo Zhu, Yilong Yang, Hongwei Huang, Abdel-Hakim Bouzid, Jun Hong. 2022 « A novel method to predict the concentricity of aero-engine rotor considering the assembly process of bolted flange joints ».
- Abdel-Hakim Bouzid, Shubhra Kanti Das. 2021 « High temperature aged leakage relaxation screening tests on confined flexible graphite gaskets ».
- Mohammad Choulaei, Abdel-Hakim Bouzid. 2021 « Stress analysis of bolted flange joints with different shell connections ».
- Rashique Iftekhar Rousseau, Abdel-Hakim Bouzid, Zijan Zhao. 2021 « Accurate evaluation of bolt and clamped members stiffnesses of bolted joints ».
- Zijan Zhao, Abdel-Hakim Bouzid. 2021 « Stress analysis of tubes during die expansion process ».
- Khaled Benfriha, Abdel-Hakim Bouzid, Peter Wardle, Michael Deligant, Yacine Benabid, Oussama Adjoul. 2020 « The influence of common business models on design processes life cycle and maintenance costs of products and systems ».
- A. Bouzid. 2020 « Liquid leak rate predictions in packed stuffing boxes ».
- Abdel-Hakim Bouzid. 2020 « Liquid leak rate predictions in packed stuffing boxes ».
- Dinu Thomas Thekkuden, Abdel-Hamid I. Mourad, Abdel-Hakim Bouzid. 2020 « Impact of grooves in hydraulically expanded tube-to-tubesheet joints ».
- Dinu Thomas Thekkuden, Abdel-Hamid I. Mourad, Abdel-Hakim Bouzid, Tariq Darabseh. 2020 « Impact of expansion pressure on wall thinning and contact pressure for hydraulically expanded tube-to-tubesheet joints: Numerical analysis ».
- Ali Khazraiyan Vafadar, Abdel-Hakim Bouzid, Anh Dung Ngo. 2020 « An analytical anisotropic model to analyze fiber reinforced polymer bolted flange joints ».
- Zijian Zhao, Abdel-Hakim Bouzid. 2020 « Stress analysis of SS316l tube die expansion for high pressure gas coolers ».
- Linbo Zhu, Jun Hong, Zhenming Shi, Abdel-Hakim Bouzid. 2020 « Numerical simulation of the assembly process of bolted flange joints used in rotating machinery ».
- Ali Salah Omar Aweimer, Abdel-Hakim Bouzid. 2019 « Prediction of liquid and gas leak rates in packed stuffing boxes ».
- Abdel-Hakim Bouzid, Hacène Touahri. 2019 « Analytical and numerical modelling of sheet plate cold expanded hole subjected to reverse yielding ».
- Mohamed Esouilem, Abdel-Hakim Bouzid, Sylvie Nadeau. 2019 « Accident causes involving pressure vessels: A case study analysis with STAMP model ».
- Mohamed Esouilem, Abdel-Hakim Bouzid, Sylvie Nadeau. 2019 « Safety and risk management analysis of accidents related to pressure vessels and piping in Alberta petrochemical industry from 2008 to 2017 ».
- Xavier Legault, Abdel-Hakim Bouzid, Ali Salah Omar Aweimer. 2019 « Mechanical characterization of valve compression packing at high temperature ».
- Amal Mouâa, Nor Eddine Laghzale, Abdel-Hakim Bouzid. 2019 « Elastic-plastic stresses in shrink fit with a solid shaft ».
- Limbo Zhu, Abdel-Hakim Bouzid, Jun Hong. 2019 « A novel methodology to optimize the tightening sequence in bolted flange joints ».
- Ali Salah Omar Aweimer, Abdel-Hakim Bouzid. 2018 « Experimental investigation of interfacial and permeation leak rates in sheet gaskets and valve stem packing ».
- Ali Salah Omar Aweimer, Abdel-Hakim Bouzid, Zijian Zhao. 2018 « Prediction of leak rates through porous materials using analytical and numerical approaches ».
- Abdel-Hakim Bouzid, Mohammad Pourreza. 2018 « Analytical evaluation of residual stresses in the transition zone of expanded tube-to-tubesheet joints ».
- I. Coria, I. Martin, A. H. Bouzid, I. Heras, M. Abasolo. 2018 « FEM superelement technique applied to oil and gas bolted flange connections ».
- Ibai Coria, Iñigo Martín, Hakim Bouzid, Iker Heras, Josu Aguirrebeitia. 2018 « Optimized bolt tightening sequences in bolted joints using superelement FE modeling technique ».
- Valentin Fort, Abdel-Hakim Bouzid, Michel Gratton. 2018 « Analytical modeling of self-loosening of bolted joints ».
- Rahul Palaniappan Kanthabhabha Jeya, Abdel-Hakim Bouzid. 2018 « Influence of thermal ratcheting on the creep and mechanical properties of High Density Polyethylene (HDPE) ».
- Linbo Zhu, Yifei Hou, Abdel-Hakim Bouzid, Jun Hong. 2018 « On the design of contact member surface shape of bolted joints to minimize clamping load loss ».
- Ali Salah Omar Aweimer, Abdel-Hakim Bouzid, Mehdi Kazeminia. 2017 « Leak rates of gasses through packing seals with different analytical approaches ».
- Abdel-Hakim Bouzid, Ali Salah Omar Aweimer. 2017 « On the use of gas flow models to predict leak rates through sheet gasket materials ».
- Palaniappan Rahul Kanthabhabha Jeya, Zijan Zhao, Abdel-Hakim Bouzid. 2017 « HDPE and PVC creep and thermal ratcheting behavior under compression ».
- Rahul Palaniappan Kanthabhabha Jeya, Abdel-Hakim Bouzid. 2017 « Characterisation of polytetrafluoroethylene and fiber based gaskets under creep and thermal ratcheting ».
- Rahul Palaniappan Kanthabhabha Jeya, Abdel-Hakim Bouzid. 2017 « Creep and thermal ratcheting characterization of polytetrafluoroethylene-based gasket materials ».
- Ali K. Vafadar, Abdel-Hakim Bouzid, Anh Dung Ngô. 2017 « Effect of material anisotropy on the structural integrity of composite bolted flanged joints ».
- Pauline Wyckaert, Sylvie Nadeau, Hakim Bouzid. 2017 « Analysis of risks of pressure vessels ».
- Zijian Zhao, Rahul Palaniappan Kanthabhabha Jeya, Abdel-Hakim Bouzid. 2017 « Creep modeling of polyvinyl chloride bolted flange joints ».
- Linbo Zhu, Abdel-Hakim Bouzid, Jun Hong. 2017 « Analytical modelling of elastic interaction in bolted flange gasketed joints ».
- Hocine Attoui, Abdel-Hakim Bouzid. 2016 « On the equivalent mechanical properties of spiral wound gaskets ».
- Abdel-Hakim Bouzid, Linbo Zhu. 2016 « Effect of adjacent tube expansion on the residual contact pressure of tube-to-tubesheet joints ».
- M. Kazeminia, A. H. Bouzid. 2016 « Predicting leakage in packed stuffing boxes ».
- Mehdi Kazeminia, Abdel-Hakim Bouzid. 2016 « Characterization and modeling of time-dependent behaviour of braided packing rings ».
- Linbo Zhu, Abdel-Hakim Bouzid, Jun Hong. 2016 « Numerical and experimental study of elastic interaction in bolted flange joints ».
- Abdel-Hakim Bouzid. 2015 « Safety and reliability assessment of a miniature steam generator ».
- Abdel-Hakim Bouzid, Mehdi Kazeminia. 2015 « Effect of reverse yielding on the residual contact stresses of tube-to-tubesheet joints subjected to hydraulic expansion ».
- Aly El Domiaty, Abdel-Hamid Mourad, Abdel-Hakim Bouzid. 2015 « A proposed generalized model for forming limit diagram ».
- Mehdi Kazeminia, Abdel-Hakim Bouzid. 2015 « On the modeling of gas flow through porous compression packings used in valve stuffing-boxes ».
- Mehdi Kazeminia, Abdel-Hakim Bouzid. 2015 « Prediction of leak rates in porous braided packing rings ».
- N. Laghzale, A. Bouzid, A. Elgharad. 2015 « L’effet de l’interférence sur un assemblage fretté dans le domaine plastique ».
- Hocine Attoui, Hakim Bouzid, Jerry A. Waterland. 2014 « Buckling and lateral pressures in spiral wound gaskets ».
- M. Daoud, W. Jomaa, Jean-François Chatelain, Abdel-Hakim Bouzid, Victor Songmene. 2014 « Identification of material constitutive law constants using machining tests: A response surface methodology based approach ».
- Monzer Daoud, Jean-François Chatelain, Hakim Bouzid. 2014 « On the effect of Johnson Cook material constants to simulate Al2024-T3 machining using finite element modeling ».
- Mehdi Kazeminia, Abdel-Hakim Bouzid. 2014 « Analysis of stresses and strains in packed stuffing-boxes ».
- Mehdi Kazeminia, Abdel-Hakim Bouzid. 2014 « Analytical and numerical evaluation of the axial stress distribution of two soft-packed stuffing-box configurations ».
- Mehdi Kazeminia, Abdel-Hakim Bouzid. 2014 « Effect of tapered housing on the axial stress distribution in a stuffing box pack ».
- Abdel-Hakim Bouzid. 2013 « Failure investigation of an aluminum extension portable ladder ».
- Abdel-Hakim Bouzid, Samir Benabdallah. 2013 « On the hot blow-out characterization of PTFE-based gasket materials ».
- S. Demers, Sylvie Nadeau, Hakim Bouzid. 2013 « On the use of multishell theory to model herniated discs ».
- Sébastien Demers, Abdel-Hakim Bouzid, Sylvie Nadeau. 2013 « Développement d'un modèle analytique pour l'étude des contraintes d'un disque intervertebral soumis à une compression axiale ».
- Sébastien Demers, Sylvie Nadeau, Hakim Bouzid. 2013 « Analytical anisotropic multi-shell model of a simplified intervertebral disc subjected to axial compression ».
- Do Tan Dan, Abdel-Hakim Bouzid, Thien-My Dao. 2012 « On the development of a new bolt spacing formula ».
- S. Demers, Hakim Bouzid, Sylvie Nadeau. 2012 « Stress analysis of the intervertebral disc using a developed multi-shell model ».
- Sébastien Demers, Abdel-Hakim Bouzid, Sylvie Nadeau. 2012 « Analytical and finite element multi-shell modelling of an intervertebral disc ».
- Lotfi Grine, Abdel-Hakim Bouzid. 2012 « Prediction of leak rates through porous gaskets at high temperature ».
- Mohammed Diany, Abdel-Hakim Bouzid. 2011 « Creep constitutive law of packing materials based on relaxation tests ».
- N. Ould-Brahim, Abdel-Hakim Bouzid, Vladimir Brailovski. 2011 « Characteristics of a bolted joint with a shape memory alloy stud ».
- Nazim Ould-Brahim, Abdel-Hakim Bouzid, Vladimir Brailovski. 2011 « Load recovery of a bolted joint with a shape memory alloy stud ».
- Sébastien Demers, Hakim A. Bouzid, Sylvie Nadeau. 2010 « La hernie discale: mieux la comprendre pour mieux la prévenir ».
- Mohammed Diany, Abdel-Hakim Bouzid. 2010 « An experimental-numerical procedure for stuffing box packing characterization ».
- Tan Dan Do, Hakim Bouzid, Thien-My Dao. 2010 « On the use of the theory of rings on non-linear elastic foundation to study the effect of bolt spacing in bolted flange joints ».
- Lotfi Grine, Abdel-Hakim Bouzid. 2010 « Liquid leak predictions in micro and nano-porous gaskets ».
- Walter Lee, Abdel-Hakim Bouzid, James Huang. 2010 « Qualification of gasket performance for vacuum applications ».
- Natalia Petrova, Abdel-Hakim Bouzid. 2010 « Flanged joints of multi-pass shell-and-tube heat exchangers subjected to non-axisymmetric thermal loading ».
- Hichem Galai, Hakim Bouzid. 2009 « Analytical modeling of flat face flanges with metal-to-metal contact beyond the bolt circle ».
- Lotfi Grine, Hakim Bouzid. 2009 « Correlation of gaseous mass leak rates through micro and nano-porous gaskets ».
- Walter Lee, Hakim Bouzid, James Huang. 2009 « Factors affecting high temperature relaxation behaviors of expanded PTFE gaskets ».
- A. Fitzgerald Waterland III, Hakim Bouzid. 2009 « Analysis of the compression behavior of spiral wound gaskets ».
- Hakim Bouzid, Akli Nechache. 2008 « On the use of Belleville washers to reduce relaxation in bolted flange joints ».
- Nor Eddine Laghzale, Abdel-Hakim Bouzid. 2008 « An analytical solution of hydraulically expanded tube-to-tubesheet joints with linear strain hardening material behaviour ».
- D. Tan Dan, Hakim Bouzid, Thien-My Dao. 2008 « Effect of bolt spacing on the circumferential distribution of gasket contact stress in bolted flange joints ».
- Abdel-Hakim Bouzid, Yves Birembaut, Hubert Lejeune. 2007 « On the effect of external bending loads in bolted flange joints ».
- Mohammed Diany, Hakim Bouzid. 2007 « Short term relaxation of stuffing box packings ».
- Nor Eddine Laghzale, Hakim Bouzid. 2007 « Analytical modeling of hydraulically expanded tube-to-tubesheet joints ».
- Sylvie Nadeau, Hakim Bouzid, D. Prud'Homme. 2007 « Étude du mécanisme lésionnel de la hernie discale : modélisation du comportement élastique non linéaire ».
- Sylvie Nadeau, Stéphane Hallé, S. Déry, P. Doucet, R. Gilbert, L. Gratton, Anh Dung Ngô, Jean Arteau, Hakim Bouzid, J. Brousseau, J. Dessureault, F. Gauthier, Frédéric Laville, P. Le-Huy, Françoise Marchand, Yvan Petit, D. Rodier, Marc Thomas. 2007 « Vers l'intégration de connaissances en santé et sécurité du travail en formation universitaire (génie mécanique) - une collaboration unique ».
- Mohammed Diany, Hakim Bouzid. 2006 « Evaluation of contact stress in stuffing box packings ».
- Hakim Bouzid. 2005 « Bolted flange joints with full face gaskets : an analytical approach based on flexibility ».
- Henri Champliaud, Abdel-Hakim Bouzid. 2005 « Computation of unloading stiffness of nonlinear gaskets using dual kriging interpolation ».
- M. Diany, Hakim Bouzid, M. Derenne. 2005 « On the validity and limits of the gasket effective width concept ».
- A. Nechache, Hakim Bouzid. 2005 « Creep effect of attached structures on bolted flanged joint relaxation ».
- Hakim A. Bouzid, Mohammed Diany, Michel Derenne. 2004 « Determination of gasket effective width based on leakage ».
- Hakim A. Bouzid, Akli Nechache. 2004 « Creep modeling in bolted flange joints ».
- Hichem Galai, Hakim Bouzid. 2004 « Analytical modeling of bolted flange joints with full face gaskets ».
- Akli Nechache, Hakim A. Bouzid, Van Ngan Le. 2004 « Analytical modeling of a bolted flange joint subjected to creep relaxation ».
- D. Prud'homme, Sylvie Nadeau, Hakim Bouzid. 2004 « Étude de mécanisme lésionnel de la hernie discale : modélisation du comportement viscoélastique ».
- Hakim A. Bouzid, Hichem Beghoul. 2003 « The design of flanges based on flexibility and tightness ».
- Hakim A. Bouzid, Henri Champliaud. 2003 « On the use of dual kriging interpolation for the evaluation of the gasket stress distribution in bolted joints ».
- Hakim Bouzid, Hichem Beghoul. 2003 « A new proposed method for the design of bolted joints based on flexibility and tightness ».
- Hakim Bouzid, Van Ngan Lê. 2003 « Développement de deux séances de laboratoire pour les cours MEC728 et SYS865 ».
- S. Nadeau, H. A. Bouzid, J. P. Kenné. 2003 « Conception d'un convoyeur à bagages pour le chargement/déchargement des avions ».
- Sylvie Nadeau, Hakim Bouzid, Jean-Pierre Kenné. 2003 « L'enseignement par la méthode des cas en génie mécanique ».
- Akli Nechache, Hakim A. Bouzid. 2003 « The determination of load changes in bolted gasketed joints subjected to elevated temperature ».
- Hakim A. Bouzid, Akli Nechache, Warren Brown. 2002 « The effect of steady state thermal loading on the deflections of a flanged joint with a cover plate ».
- Warren Brown, Michel Derenne, Abdel-Hakim Bouzid. 2002 « Determination of gasket stress levels during thermal transients ».
- Akli Nechache, Hakim A. Bouzid. 2002 « The redistribution of load in bolted gasketed joints subjected to steady state thermal loading ».
- W. Brown, M. Derenne, A. Bouzid. 2001 « The effect of thermal loading of pressure vessel joints ».
- Warren Brown, Michel Derenne, Hakim A. Bouzid. 2001 « Determination of gasket stress levels during high temperature flange operation ».
- Warren Brown, Michel Derenne, Hakim A. Bouzid. 2001 « Determination of the mechanical and thermal properties of selected gasket types ».
- Abdel-Hakim Bouzid, M. Derenne, L. Marchand, J. R. Payne. 2000 « Preventing PTFE Gasket Blow-Out ».
- W. Brown, Michel Derenne, Abdel-Hakim Bouzid. 2000 « Determination of the Steady State Operating Temperature of Pressure Vessel Flange Components: Part 2 - Simplified Methods ».
- Warren Brown, Michel Derenne, Abdel-Hakim Bouzid. 2000 « Determination of the steady state operating temperature of pressure vessel flange components: part 1 - analytic methods ».
- M. Derenne, L. Marchand, Abdel-Hakim Bouzid, J. R. Payne. 2000 « Long Term Elevated Temperature Performance of Reinforced Flexible Graphite Sheet Gaskets ».
- O. Sakr, Abdel-Hakim Bouzid, M. Derenne, L. Marchand, J. R. Payne. 2000 « Correlation Between PPMV and Mass Leakage Rate of Gasketing Products ».
- A. H. Bouzid, M. Derenne. 1999 « Simple method for analyzing the contact stress in bolted flange joints with non-linear gaskets ».
- M. El-Rich, A. Bouzid, M. Derenne. 1999 « On the effective gasket width and the contact stress in bolted gasketed joints ».
- N. Mameri, A. Bouzid, M. Derenne, L. Marchand, D. L. Piron. 1999 « Quantification of corrosion in bolted gasketed joints ».
- N. Mameri, D. L. Piron, M. Derenne, L. Marchand, A. Bouzid, Y. Birembaut. 1999 « Influence des joints d’étanchéité sur la corrosion des aciers: Développement d’un nouvel appareillage ».
- A. H. Bouzid, M. Derenne, A. Chaarani. 1998 « Tightness prediction of bolted flanged connections subjected to external bending moments ».
- M. Derenne, L. Marchand, A. Bouzid, J. R. Payne. 1998 « Proposed modifications to Draft No. 9 of the standard test method for gasket constants for bolted joint design ».
- V. Masi, A. H. Bouzid, M. Derenne. 1998 « Correlation between gases and mass leak rate of gasketing materials ».
- A. Bouzid, M. Derenne. 1997 « Distribution of the gasket contact stress in bolted flanged connections ».
- A. Bouzid, A. Chaaban. 1996 « Proposed method for evaluating relaxation in bolted flanged connections ».
- A. Chaaban, A. Bouzid, M. Derenne, W. Schaefer. 1996 « On the use of a simple test fixture as a reliable representation of typical ANSI B16.5 flanged joint relaxation behaviour ».
- A. Bouzid, A. Chaaban, A. Bazergui. 1994 « Effect of gasket creep relaxation on the leakage tightness of bolted flanged joints ».
- A. Bouzid, A. Chaaban, A. Bazergui. 1994 « The influence of the flange rotation on the leakage performance of bolted flanged joints ».
- A. Chaaban, A. Bouzid, M. Derenne, W. Schaefer. 1993 « Evaluation of torque coefficients and gasket stress distributions in a bolted flanged joint using different types of lubricants ».
- A. Bouzid, A. Chaaban. 1992 « Flanged joints analysis: a simplified method based on elastic interaction ».
- José Veiga, Abdel-Hakim Bouzid. 2013 « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.
- Reza Adibi-Asl, Abdel-Hakim Bouzid. 2012 « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.
- Jerry Waterland, Abdel-Hakim Bouzid, Y. Shoji, J. F. Jr. Cory. 2011 « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.
- Abdel-Hakim Bouzid, John Martin. 2010 « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.
- Hakim Bouzid, J. Martin. 2009 « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.
- Abdel-Hakim Bouzid. 2008 « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.
- Abdel-Hakim Bouzid, John Martin. 2007 « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.
- A. Bouzid, H. Kockelmann, T. Sawa. 2006 « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.
- A. Bouzid, G. D. Morandin. 2005 « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.
- Abdel-Hakim Bouzid. 2004 « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume Analysis of bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.
- Hakim A. Bouzid, Toshiyuki Sawa. 2003 « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume Analysis of bolted joints ». New-York, NY, USA : American Society of Mechanical Engineers. 149 p.
- A. Bouzid. 2011 « ASTM F03 Research project on thermal expansion coefficient of PTFE gasketing materials under high loads ». ASTM International. 39 p.
- Hakim A. Bouzid. 2011 « Étude de l'effrondrement d'une échelle à coulisse causant la mort d'un travailleur de l'Église Sacré-Coeur-de-Jésus ». CSST. 43 p.
- Hakim Bouzid, Anh Dung Ngo. 2011 « Mesures du coefficient de frottement du plancher en Terrazzo de l'Église Sacré-Coeur-de-Jésus ». CSST. 10 p.
- Caroline Duchaine, Marc Veillette, Yvon Cormier, Jacques Lavoie, France Desjardins, Hakim Bouzid. 2003 « Analyse microbiologique des fluides de coupe de métaux : étude exploratoire ». Montréal, Canada : IRSST. 33 p.