Mohammad Jahazi

Professeur

Department

Département de génie mécanique

Degrees

Dipl. d'ingénieur (Polytech Montpellier, France), D.E.A. (I.N.S.T.N, Saclay, France), Ph.D. (McGill)

Office

A-2148

mohammad.jahazi@etsmtl.ca

University faculty member standing confidently in a tech lab environment.

Research units

Visit the website :Industrial Research Chair in Forming Technologies of High-Strength Alloys
Visit the website :LIPPS – Products, Processes and Systems Engineering Laboratory

Research axes

Innovative materials and advanced manufacturing
Aeronautics and Aerospace
Sustainable Development, Circular Economy and Environmental Issues

Areas of expertise

Interactions : procédés de fabrication-matériau-propriétés mécaniques
Procédés de mise en forme à chaud : forgeage, laminage, extrusion, mise en forme superplastique des feuillards
Matériaux pour transport et énergie: alliages d’Al, superalliages, alliages de Ti, aciers spéciaux
Nouveaux procédés d’assemblage : FSW, LFW, EBW, TLP
Caractérisation et modélisation de la microstructure
Optimisation des propriétés mécaniques
Transformation de phase, recristallisation et précipitation dans les alliages métallique
Traitements thermiques
Analyse de défaillances

Awards and honors

2017 : Prix d'excellence du c.a. en recherche 2017 | École de technologie supérieure

Course

3 credits Hiver 2024

3 credits Été 2024

3 credits Hiver 2024

3 credits Été 2024

Supervision

Optimisation du cycle de traitement thermique d'un acier à haute résistance mécanique : étude expérimentale et simulation, par Valentin Hurel
Automne 2021
Prédiction de la Fermeture des porosités dans des lingots de grande taille : application des modèles numériques et validation expérimentale, par Antoine Geisler
Été 2022
En codirection avec : Louis-Philippe Lapierre-Boire
Thermomechanical Study of H13 Tool Steel, par Léa Ebacher
Été 2024
En codirection avec : Pierre Bélanger
Influence de la vitesse de soudage par friction malaxage sur les propriétés mécaniques locales et la microstructure d’un alliage d’aluminium Al-6%Mg, par Philippe Grandmont
Automne 2020
Influence des paramètres de trempe sur l’évolution des propriétés thermo-physiques de l’acier 300M, par Romain Alcaras
Été 2020
En codirection avec : Hakim A. Bouzid
Conception et fabrication d’un banc d’essai pour la mesure du coefficient de friction haute température des alliages d’aluminium, par Guillaume David
Hiver 2021
En codirection avec : Victor Songmene
Étude expérimentale des effets de l'outil de coupe, des conditions d'usinage et de lubrification sur la qualité de surface et le comportement en traction des pièces en alliages d'aluminium, par Souhaila Boulahmi
Hiver 2015
En codirection avec : Philippe Bocher
Caractérisation du brasage du TI-6AL-4V par le TI-20ZR-20NI-20CU dans le cadre d'applications aéronautiques, par Rémi Chabrol
Automne 2014
Simulation numérique de la trempe à l'eau d'une pièce forgée de grande dimension : effet de la macroségrégation et de la taille des grains, par Mountadar Lyassami
Hiver 2018
Influence of Microstructure on Susceptibility to Weld Defects in Two High Strength Low Alloy Steels, par Amir Keyvan Edalat Nobarzad
Été 2017
En codirection avec : Philippe Bocher
Friction Stir Welding of 2024 Aluminum Alloy to 2198 Aluminum-Lithium Alloy, par Mahdi Masoumi Khalilabad
Été 2017
Influence des paramètres des traitements thermomécaniques sur l'évolution de la microstructure du superalliage AD730, par Mathias Lieutaud
Été 2016
En codirection avec : Victor Songmene
Influence des paramètres du procédé fsw sur les caractéristiques des bandes alternées (onion rings) dans les alliages d'aluminium, par Mariem Zoghlami
Été 2017
Determination of Optimal Forging Conditions for Void Elimination in Large Steel Ingots, par Nathan Harris
Automne 2016
Microstructure Evolution and Optimization of the Tempering Heat Treatment of a Medium-Carbon Low-Alloy Steel, par Seyyed Hesamodin Talebi
Été 2018
En codirection avec : Henri Champliaud
Conception d'outillages pour le traitement thermique des composants de trains d'atterrissage en acier, par Chokri Delly
Automne 2022
En codirection avec : Victor Songmene
Étude de l'usinabilité par électroérosion des alliages d'aluminium à faible coefficient de dilatation thermique pour application spatiale, par Frédéric Bédard
Hiver 2018
Influence de la vitesse de refroidissement sur l'évolution de la la macroségregation dans les lingots de grande taille, par Gary Brionne
Été 2018
En codirection avec : Henri Champliaud
Finite Element Modeling of the Linear Friction Welding Process, par Samuel Bertrand
Été 2019
Transformation dynamique dans l'alliage de titane IMI 834, par Victor Mackowski
Hiver 2020
Optimisation des conditions de brasage des carbures de tungsten aux aciers outils utilisés dans l'industrie de la transformation du bois, par Ludovic Jego
Automne 2023
En codirection avec : Elmira Moosavi
Prédiction de la teneur finale en phosphore de l'acier dans le four à arc électrique (EAF) par l'application de réseaux de neurones artificiels, par Riadh Azzaz
Été 2024
Usure des aciers outils pour la coupe du bois : influence du revêtement et de la composition chimique, par Vanella Mbakop Nanshie
Automne 2023
En codirection avec : Antoine Tahan
Développement d'outil de balancement pour la compensation de la distorsion dans un train d'atterrissage, par Baptiste Portet
Automne 2022
En codirection avec : Henri Champliaud
Développement d'une méthode de caractérisation du transfert de chaleur pour le traitement thermique, par Jean-Sébastien Lemyre-Baron
Automne 2024
En codirection avec : Victor Songmene
Étude de l'usinabilité par fraisage d'un nouvel alliage d'aluminium MS43 à très haut pourcentage de silicium, par Oussama Chaieb
Hiver 2018
En codirection avec : Henri Champliaud
Évolution de la microstructure lors du traitement thermique de l'acier inoxydable AISI 410, par Mathieu Devar
Hiver 2021
En codirection avec : Henri Champliaud
Optimization of the Meshing Parameters for the Sequentially Coupled Thermo-Mechano-Metallurgical Simulation of the Quenching of a Cylindrical Steel Body, par Daniel Olvera-Joseph
Automne 2023

Étude de l'évolution de la microstructure lors des traitements thermomécanique du superalliage AD730, par Pauline Lacomme
Automne 2014
Traitements thermomécaniques des pièces fabriquées par la fabrication additive, par Badr Lahmidi
Automne 2017
Influence des conditions de traitements thermomécaniques sur la microstructure et la fracture de boulons fait du superalliage Inconel 718, par Mohammad Mahdi Niazi
Automne 2020
Influence des traitements thermiques trempe-revenu sur les propriétés mécaniques et physique des aciers faiblement alliés, par Chakib Benhemada
Hiver 2024
Influence de la composition chimique et cycle du traitement thermique trempe-revenu sur les cinétiques de changement de phase, la microstructure et la durée des alliages à haute résistance mécanique, par Charly Franklin Eboua Epoté
Hiver 2024

Influence des paramètres de déformation à chaud sur l'évolution de la microstructure de l'alliage AD730, par Mathieu Mazure
Hiver 2021
En codirection avec : Nicolas Bombardier
Dimensionnement d'un tribomètre, par Maxime Le Royer
Été 2017

En codirection avec : Réjean René
Soudage par friction pilotée de l'acier carbone A105, par Mohamed Zakaria El Yacoubi El Idrissi
Automne 2020
En codirection avec : Henri Champliaud
Cinétique de la transformation martensitique dans l'acier 300M, par Eric Sourdin
Automne 2024
En codirection avec : Henri Champliaud
Validation du modèle numérique simulant les défauts d'interconnection C4 et UBGA à l'assemblage des modules microélectroniques, par David Tremblay
Été 2024
En codirection avec : Roxane Trehorel
Caractérisation de 8 coulées d'acier et interprétation des résultats, par Léo Chimier
Été 2021

Analyse des données des essais dilatométriques sur des alliages à très haute résistance mécanique, par Kamran Abed-Khorasani
Hiver 2015
Tribologie dans un procédé de mise en forme haute vitesse, par Maxime Le Royer
Été 2017
Influence des traitements thermiques trempe-revenu sur les propriétés mécaniques des alliages à haute résistance mécanique, par Lucas Tessier
Hiver 2023

Analyse des contraintes par méthode des éléments finis, par Chakib Benhemada
Hiver 2024
Stage en ingénierie - Soutien aux avions en service, par Leonel Dongmo Tsafack
Automne 2023

Qualification de l'assemblage automatisé pour l'avion A220 et résolution des problèmes complexes, par Mohammed Amin Sabir
Été 2020
Stagiaire intégrateur cabine, par Dorian Sauzede
Été 2024
Gestion de projets manufacturiers et innovations, par Lucas Tessier
Hiver 2023

Interaction entre précipités et recristallisation dynamique dans un acier médium carbon au vanadium pendant le forgeage, par Makarim Khan
Hiver 2022
Caractéristique des contraintes d'écoulement et des cinétiques de transformation durant un forgeage libre de lingots d'aciers de grande taille, par Matthieu Bitterlin
Automne 2019
En codirection avec : Henri Champliaud
Determination of a Flow Rule during Post Weld Heat Treatment in Martensitic Stainless Steel, par Mir Mehrdad Hosseini
Automne 2024
En codirection avec : Philippe Bocher
Formability Extension of Aerospace Alloys for Tube Hydroforming Applications, par Mélissa Anderson
Été 2016
En codirection avec : Victor Songmene
Influence of Cryogenic Treatment on Microstructure and Mechanical Properties of High Strength AISI D2 Tool Steel, par Hadi Ghasemi Nanesa
Hiver 2016
Influence of Deformation Path on Microstructure Evolution During Open Die Forging of High Strength Steels, par Prashant Nagnath Dhondapure
Automne 2024
Evolution of Microstructure and Mechanical Properties During Linear Friction Welding of AD730TM Ni-Based Superalloy, par Fatemeh Masoumi
Été 2018
En codirection avec : Philippe Bocher
Effet des paramètres de coupe sur la microstructure des couches subsurfaciques induites par tournage dur de l'inconel 718, par Heithem Touazine
Hiver 2018
Microstructure Evolution of Medium Carbon Low Alloy Steel During Ingot Breakdown Process, par Kanwal Chadha
Été 2018
En codirection avec : Mamoun Medraj
Évolution de la microstructure des aciers à haute résistance mécanique durant le traitement thermique de trempe, par Emna Ben Fredj
Hiver 2019
En codirection avec : Henri Champliaud
Prédiction de distorsions induites lors du procédé de trempe de brames d’acier de fortes dimensions : modélisation et validation expérimentale, par Yassine Bouissa
Été 2020
En codirection avec : Pierre Bélanger
Inspection de blocs d'acier forgé de grand volume par ultrasons multi-éléments, par Frédéric Dupont
Été 2018
Simulation numérique et validation expérimentale des effets des caractéristiques de la masselotte (hot top) sur la macroségrégation dans les lingots de grande taille en acier à haute résistance, par Neda Ghodrati
Automne 2024
En codirection avec : Gholam Reza Ebrahimi
Microstructure-Based Process Modeling of Open Die Forging of a High Strength Martensitic Stainless Steel, par Simin Dourandish
Hiver 2023
En codirection avec : Carlos Garcia-Mateo
Effect of Ausforming on the Microstructure and Transformation Kinetics of a Medium Carbon Carbide-free Bainitic Steel, par Muftah Zorgani
Automne 2021
Influence of Casting Process Parameters on Macrosegregation in Large Size Steel Ingots Using Experimentation and Simulation, par Chunping Zhang
Automne 2019
En codirection avec : Tan Pham
Experimental and Numerical Investigation of Temperature Evolution During Super Plastic Forming of an Aluminum Alloy Sheet and its Influence on Distortion, par Alireza Aleyari
Automne 2020
En codirection avec : Farzad Bazdidi-Tehrani
Optimization of Furnace Residence Time and Ingots Positioning during the Heat Treatment Process of Large Size forged Ingots, par Nima Bohlooli Arkhazloo
Hiver 2020
Investigating the Thermally Grown Oxides and Attributed Effects of Scales on Heat Transfer and Interfacial Friction Between the Ingot and Die During the Open-Die Forging Process., par Ali Vedaei Sabegh
Automne 2021
En codirection avec : Victor Songmene
Analysis and Modeling of Machining and Surface Integrity Characteristics Under Various Turning Environments, par Mahshad Javidikia
Hiver 2021
En codirection avec : Mousa Javidani
Effet des traitements thermomécaniques sur les aciers à outils utilisés pour l'industrie du bois, par Hamza Sofiane Meddas
Automne 2024
Dissimilar Linear Friction Welding of Additively Manufactured to Forged Ni-Based Superalloy Characterization, par Parisa Darvishmotevally
Automne 2024
En codirection avec : Alireza Khodabandeh
Influence of Welding Conditions on Microstructure and Defect Generation in 316 Stainless Steel : Experimentation and Modeling, par Mohammad Maroufkhani
Automne 2024
En codirection avec : Victor Songmene
Interactive Effects Between Cutting Fluid, Particles and Machining Parameters on Tool Performance and Part Quality During Machining of Aluminium Alloys and Aluminium-Based Composites, par Sandrine Anicette Tcheuhebou Tina
Automne 2024
En codirection avec : Henri Champliaud
Accurate Heat Transfer Modelling of the Quenching Hardening, par Gamaliel Salazar Jimenez
Automne 2024
En codirection avec : Farhad Rézai-Aria
Linear Friction Welding of AD730TM Ni-Based Superalloy to Additively Manufactured Inconel 718, par Seyedmohammad Tabaie
Automne 2021
Mathematical Modeling of the Kinetics of Martensite Transformation and the Thermomechanical Properties of a Low Alloy Medium-Carbon Steel, par Jia Hong Liu
Automne 2023
En codirection avec : Pinaki Prasad Bhattacharjee
Influence of Initial Microstructure and Heating Rate on Kinetics of Phase Tranformation in a Medium Carbon Low Alloy Steel, par Navneeth Rajakrishnan
Automne 2024
En codirection avec : Elmira Moosavi
Enhancement of Refractory Lifetime in Electric Arc Furnace Steelmaking, par Kianoosh Kaveh
Automne 2024
Investigating Microstructure Evolution of Large Size Forgings Made of High Strengh Steels during Heat Treatment, par Rafik Safarbati
Automne 2024
En codirection avec : Henri Champliaud
Numerical Evaluation of Distorsion and Delamination in Cold Spray Deposition, par Moeen Seyedein
Automne 2024
En codirection avec : Carlos Garcia-Mateo
On the Kinetics of Carbides and Phase Evolution during Tempering of High Strength Medium Carbon Steels, par Ehsan Tolouei
Automne 2024
En codirection avec : Farzad Bazdidi-Tehrani
Optimization of the Tempering Heat Treatment Cycle of Large Size Forgings, par Sajad Mirzaei
Automne 2024
En codirection avec : Naima Boutarek-zaourar
Influence de la géométrie et dimensions du moule sur le développement des hétérogénéités compositionelles des aciers à haute résistance mécanique, par Lydia Benazzouz
Automne 2024
En codirection avec : Mounir Baiteche
Quenching of Large Size Forgings: Modeling and Experimental Validation, par Hadil Messikh
Automne 2024

Publications

Riadh Azzaz, Kianoosh Kaveh, Jean-Benoit Morin, Mohammad Jahazi, Elmira Moosavi-Khoonsari. 2022 « Slag characterization regarding refractory wear in EAF steelmaking route ». Affiche présentée lors de la conférence : 61st Annual Conference of Metallurgists (COM) (Montreal, QC, Canada, Aug. 21-24, 2022)
Mahshad Javidikia, Morteza Sadeghifar, Victor Songmene, Mohammad Jahazi. 2020 « 3D Finite element simulation of residual stresses induced by wet turning of AA6061-T6 ». Affiche présentée lors de la conférence : 17th Encyclopaedia Archives Encyclopaedia of Research on Aluminium in Québec REGAL Students' Day = 17e Encyclopédie de la Recherche sur l’Aluminium au Québec : Journée des étudiants du REGAL (En ligne, Nov. 05-06, 2020)
S. Tabaie, F. Rézaï-Aria, M. Jahazi. 2020 « Effect of pre-heat treatment on micro-segregation of nb in the microstructure of linear friction welded inconel 718 fabricated by selective laser melting ». Affiche présentée lors de la conférence : Conference of Metallurgists (Toronto, ON, Canada, Aug. 24-27, 2020)
H.-C. Nguyen, X-T. Pham, M. Jahazi. 2018 « Implementing phase-field ductile fracture model for aluminum welded joint ». Affiche présentée lors de la conférence : REGAL student’s day (Montreal, QC, Canada, June 18-19, 2018)
C. Zhang, D. Shahriari, A. Loucif, L. -Ph. Lapierre-Boire, R. Tremblay, H. Melkonyan, M. Jahazi. 2017 « Influence des paramètres de coulée sur la macroségrégation des aciers à haute résistance mécanique dans les lingots de grande taille: expérimentation et modélisation ». Affiche présentée lors de la conférence : ASM-Montreal Student Night (Montreal, QC, Canada, March 15, 2017)
T. Belhadj, V. Songmene, M. Jahazi. 2015 « Influence des paramètres de procédé sur la distorsion de grandes plaques d'aluminium formées par thermoformage : phase d'éjection ». Affiche présentée lors de la conférence : Journée des étudiants du REGAL (Chicoutimi, QC, Canada, 11 nov. 2015)

Kanwal Chadha, Mohammad Jahazi. 2019-03-12 « Approche atomistique de la transformation de l’acier ». Substance ÉTS
Kanwal Chadha, Mohammad Jahazi. 2019-03-12 « Atomistic Approach in Steel Transformation ». Substance ÉTS

R. Nikbakht, M. Saadati, H. S. Kim, M. Jahazi, R. R. Chromik. 2025 « Multi-scale analysis of microstructural evolution and atomic bonding mechanisms in CoCrFeMnNi high-entropy alloys upon cold spray impact ». Journal of Materials Science and Technology vol. 208. p. 263-277
Prashant Dhondapure, Navneeth Rajakrishnan, Soumyaranjan Nayak, Henri Champliaud, Jean-Benoit Morin, Mohammad Jahazi. 2024 « Influence of deformation path on microstructure evolution during the open die forging of large size ingot of high strength steel: Experiments and FE analysis ». International Journal of Advanced Manufacturing Technology vol. 134 , nº 7-8. p. 3733-3750
Simin Dourandish, Henri Champliaud, Jean -Benoit Morin, Mohammad Jahazi. 2024 « Numerical simulation and experimental validation of microstructure evolution during the upsetting process of a large size martensitic stainless steel forging ». International Journal of Material Forming vol. 17 , nº 4
Eslam M. Fayed, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2024 « Effect of microwave hybrid heat treatment on the microstructure and hardness of 3D printed Inconel 718 superalloy ». Canadian Metallurgical Quarterly vol. 63 , nº 2. p. 312-328
Neda Ghodrati, Henri Champliaud, Jean -Benoit Morin, Mohammad Jahazi. 2024 « Influence of the hot-top thermal regime on the severity and extent of macrosegregation in large-size steel ingots ». Journal of Manufacturing and Materials Processing vol. 8 , nº 2
Neda Ghodrati, Patrice Ménard, Jean -Benoit Morin, Mohammad Jahazi. 2024 « Influence of hot top geometry on columnar-to-equiaxed transition in a 12 MT steel ingot ». Journal of Materials Research and Technology vol. 31. p. 3489-3508
Mohamed Imad Eddine Heddar, Brahim Mehdi, Nedjoua Matougui, Souheil Antoine Tahan, Mohammad Jahazi. 2024 « Adaptable multi-objective optimization framework: Application to metal additive manufacturing ». International Journal of Advanced Manufacturing Technology vol. 132 , nº 3-4. p. 1897-1914
Mir Mehrdad Hosseini, Jacques Lanteigne, Carlo Baillargeon, Mohammad Jahazi, Henri Champliaud. 2024 « Development of a flow rule based on a unified plasticity model for 13Cr-4Ni low-carbon martensitic stainless steel subject to post-weld heat treatment ». Metals vol. 14 , nº 7
Vanella Mbakop Nanshie, Ali Aidibe, Majid Heidari, Mohammad Jahazi. 2024 « Impact of coating and microstructure on wear resistance of tool steels for wood cutting: a novel approach to quantification and analysis of wear-related damages ». Journal of Wood Science vol. 70 , nº 1
Sajad Mirzaei, Nima Bohlooli Arkhazloo, Jean-Benoît Morin, Mohammad Jahazi. 2024 « Influence of heating elements layout on temperature uniformity in a large size heat treatment furnace ». Case Studies in Thermal Engineering vol. 61
A. Momeni, G. R. Ebrahimi, M. Jahazi, H. R. Ezatpour. 2024 « Microstructure characterization and dynamic recrystallization behavior of Ni–Cu alloy during hot deformation ». Mechanics of Materials vol. 193
Musa Muhammed, Mousa Javidani, Tahere Ebrahimi Sadrabadi, Majid Heidari, Tom Levasseur, Mohammad Jahazi. 2024 « A comprehensive review of cathodic arc evaporation physical vapour deposition (CAE-PVD) coatings for enhanced tribological performance ». Coatings vol. 14 , nº 3
Ehsan Tolouei, Valentin Hurel, Abdelhalim Loucif, Jean-Benoit Morin, Mohammad Jahazi. 2024 « Influence of the as quenched state and tempering temperature on the final microstructure and hardness of a high strength medium carbon steel ». Materials Chemistry and Physics vol. 325
Jeongho Yang, Woongbeom Heogh, Hogi Ju, Sukhyun Kang, Tae-Sik Jang, Hyun-Do Jung, Mohammad Jahazi, Seung Chul Han, Seong Je Park, Hyoung Seop Kim, Susmita Bose, Amit Bandyopadhyay, Martin Byung-Guk Jun, Young Won Kim, Dae-kyeom Kim, Rigoberto C. Advincula, Clodualdo Aranas, Sang Hoon Kim. 2024 « Functionally graded structure of a nitride-strengthened Mg2Si-based hybrid composite ». Journal of Magnesium and Alloys vol. 12 , nº 3. p. 1239-1256
Frederic Bedard, Abdelhalim Loucif, Mohammad Jahazi, Victor Songmene. 2023 « Microstructural damage during electrical discharge machining of a high silicon aluminum alloy for space applications ». International Journal of Advanced Manufacturing Technology vol. 128 , nº 5-6. p. 2311-2317
Prashant Dhondapure, Pierre Tize Mha, Soumyaranjan Nayak, Lea Ebacher, Simin Dourandish, Henri Champliaud, Jean -Benoit Morin, Mohammad Jahazi. 2023 « Influence of deformation path on the stress state and damage evolution along the central axis of a large size forged ingot of AISI H13 steel ». Journal of Materials Research and Technology vol. 27. p. 8244-8257
Antoine Geisler, Morteza Sadeghifar, Jean -Benoit Morin, Abdelhalim Loucif, Mohammad Jahazi. 2023 « Void closure during open die forging of large size martensitic stainless-steel ingots: an experimental-analytical-numerical study ». International Journal of Material Forming vol. 16 , nº 1
Faiçal Habassi, Manel Houria, Noureddine Barka, Mohammad Jahazi. 2023 « Influence of post-treatment on microstructure and mechanical properties of additively manufactured C300 maraging steel ». Materials Characterization vol. 202
Mahshad Javidikia, Morteza Sadeghifar, Henri Champliaud, Mohammad Jahazi. 2023 « Grain size and temperature evolutions during linear friction welding of Ni-base superalloy Waspaloy: Simulations and experimental validations ». Journal of Advanced Joining Processes vol. 8
Mohammad Maroufkhani, Soorosh Hakimian, Alireza Khodabandeh, Iulian Radu, Lucas A. Hof, Mohammad Jahazi. 2023 « Influence of oxygen content in the protective gas on pitting corrosion resistance of a 316l stainless steel weld joint ». Materials vol. 16 , nº 17
Pierre Tize Mha, Prashant Dhondapure, Mohammad Jahazi, Amèvi Tongne, Olivier Pantale. 2023 « Interpolation and extrapolation performance measurement of analytical and ANN-based flow laws for hot deformation behavior of medium carbon steel ». Metals vol. 13 , nº 3
Sajad Mirzaei, Nima Bohlooli Arkhazloo, Farzad Bazdidi-Tehrani, Jean -Benoit Morin, Abdelhalim Loucif, Mohammad Jahazi. 2023 « Influence of spacers and skid sizes on heat treatment of large forgings within an industrial electric furnace ». Energies vol. 16 , nº 7
Musa Muhammed, Mousa Javidani, Majid Heidari, Mohammad Jahazi. 2023 « Enhancing the tribological performance of tool steels for wood-processing applications: A comprehensive review ». Metals vol. 13 , nº 8
Narges Omidi, Pedram Farhadipour, Lamya Baali, Karim Bensalem, Noureddine Barka, Mohammad Jahazi. 2023 « A comprehensive review of additively manufactured H13 tool steel applicable in the injection mold industry: Applications, designs, microstructure, mechanical properties ». JOM vol. 75 , nº 11. p. 4457-4469
Sandrine A. Tcheuhebou Tina, Mahshad Javidikia, Mohammad Jahazi, Victor Songmene. 2023 « The influence of tool geometry parameters on thermo-mechanical loads and residual stresses induced by orthogonal cutting of AA6061-T6: A numerical investigation ». Processes vol. 11 , nº 4
Pierre Tize Mha, Prashant Dhondapure, Mohammad Jahazi, Amèvi Tongne, Olivier Pantalé. 2023 « Artificial neural network-based critical conditions for the dynamic recrystallization of medium carbon steel and application ». Metals vol. 13 , nº 10
Nima Bohlooli Arkhazloo, Farzad Bazdidi-Tehrani, Mohammad Jadidi, Jean-Benoit Morin, Mohammad Jahazi. 2022 « Determination of temperature distribution during heat treatment of forgings: Simulation and experiment ». Heat Transfer Engineering vol. 43 , nº 12. p. 1041-1064
Simin Dourandish, Henri Champliaud, Jean -Benoit Morin, Mohammad Jahazi. 2022 « Microstructure-based finite element modeling of a martensitic stainless steel during hot forging ». International Journal of Advanced Manufacturing Technology vol. 123 , nº 7-8. p. 2833-2851
Adriana Eres-Castellanos, Muftah Zorgani, Davood Shahriari, Radu Romanica, Jose Antonio Jimenez, Carlos Garcia-Mateo, Mohammad Jahazi. 2022 « Effect of the ausforming deformation mode on bainitic transformation in a medium carbon high silicon steel ». Journal of Materials Research and Technology vol. 18. p. 3428-3442
Eslam M. Fayed, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2022 « Stability of the microstructure and elevated-temperature mechanical properties of additively manufactured Inconel 718 superalloy subjected to long-term in-service thermal cycling ». Materials Science and Engineering: A vol. 838
B. V. Feujofack Kemda, N. Barka, M. Jahazi, D. Osmani. 2022 « Multi-objective optimization of process parameters in resistance spot welding of A36 mild steel and hot dipped galvanized steel sheets using non-dominated sorting genetic algorithm ». Metals and Materials International vol. 28 , nº 2. p. 487-502
Neda Ghodrati, Mounir Baiteche, Abdelhalim Loucif, Paloma Isabel Gallego, Morin Jean-Benoit, Mohammad Jahazi. 2022 « Influence of hot top height on macrosegregation and material yield in a large-size cast steel ingot using modeling and experimental validation ». Metals vol. 12 , nº 11
Manel Houria, Nedjoua Matougui, Brahim Mehdi, Nabil Kherrouba, Mohammad Jahazi. 2022 « Effect of plastic anisotropy on the kinetics of static softening in AA2024-T3 aluminum alloy ». Metals and Materials International vol. 28. p. 2042-2058
M. Kavyani, G. R. Ebrahimi, H. R. Ezatpour, M. Jahazi. 2022 « Microstructure refinement, mechanical and biocorrosion properties of Mg–Zn–Ca–Mn alloy improved by a new severe plastic deformation process ». Journal of Magnesium and Alloys vol. 10 , nº 6. p. 1640-1662
Mahdi Masoumi Khalilabad, Yasser Zedan, Damien Texier, Mohammad Jahazi, Philippe Bocher. 2022 « Effect of heat treatments on microstructural and mechanical characteristics of dissimilar friction stir welded 2198/2024 aluminum alloys ». Journal of Adhesion Science and Technology vol. 36 , nº 3. p. 221-239
Morteza Sadeghifar, Mahshad Javidikia, Victor Songmene, Mohammad Jahazi. 2022 « A comparative analysis of chip shape, residual stresses, and surface roughness in minimum-quantity-lubrication turning with various flow rates ». International Journal of Advanced Manufacturing Technology vol. 121 , nº 5-6. p. 3977-3987
Jagannadh Sripada, Yuan Tian, Kanwal Chadha, Gobinda Saha, Mohammad Jahazi, John Spray, Clodualdo Aranas. 2022 « Effect of hot isostatic pressing on microstructural and micromechanical properties of additively manufactured 17–4PH steel ». Materials Characterization vol. 192
Seyedmohammad Tabaie, Farhad Rezai-Aria, Bertrand C. D. Flipo, Mohammad Jahazi. 2022 « Dissimilar linear friction welding of selective laser melted Inconel 718 to forged Ni-based superalloy AD730: Evolution of strengthening phases ». Journal of Materials Science and Technology vol. 96. p. 248-261
Ali Vedaei-Sabegh, Jean-Benoît Morin, Henri Champliaud, Mohammad Jahazi. 2022 « Influence of thermally grown oxides on interfacial friction during hot deformation of large-size forging ingots ». Journal of Materials Research and Technology vol. 21. p. 3412-3424
Ali Vedaei-Sabegh, Jean-Benoît Morin, Mohammad Jahazi. 2022 « Influence of thermally grown oxide layers thickness on temperature evolution during the forging of large size steel ingots ». Materials Chemistry and Physics vol. 275
Chunping Zhang, Abdelhalim Loucif, Mohammad Jahazi, Jean-Benoit Morin. 2022 « FE modelling and prediction of macrosegregation patterns in large size steel ingots: Influence of filling rate ». Metals vol. 12 , nº 1
Nima Bohlooli Arkhazloo, Farzad Bazdidi-Tehrani, Jean-Benoît Morin, Mohammad Jahazi. 2021 « Optimization of furnace residence time and loading pattern during heat treatment of large size forgings ». International Journal of Advanced Manufacturing Technology vol. 113 , nº 9-10. p. 2447-2460
Yassine Bouissa, Muftah Zorgani, Davood Shahriari, Henri Champliaud, Jean-Benoît Morin, Mohammad Jahazi. 2021 « Microstructure-based FEM modeling of phase transformation during quenching of large-size steel forgings ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 52 , nº 5. p. 1883-1900
K. Chadha, C. Aranas, M. Jahazi. 2021 « Effect of double hit hot deformation on the evolution of dynamically transformed ferrite ». Metals and Materials International vol. 27 , nº 11. p. 4307-4321
S. Dourandish, M. Jahazi, G. R. Ebrahimi, L. Ebacher. 2021 « Influence of eutectic phase precipitation on cracking susceptibility during forging of a martensitic stainless steel for turbine shaft applications ». Journal of Materials Research and Technology vol. 13. p. 260-270
Frederic Dupont-Marillia, Mohammad Jahazi, Pierre Belanger. 2021 « Phased array probe for the inspection of large steel forgings ». Cogent Engineering vol. 8 , nº 1
Adriana Eres-Castellanos, Javier Hidalgo, Muftah Zorgani, Mohammad Jahazi, Isaac Toda-Caraballo, Francisca G. Caballero, Carlos Garcia-Mateo. 2021 « Assessing the scale contributing factors of three carbide-free bainitic steels: A complementary theoretical and experimental approach ». Materials and Design vol. 197
Eslam M. Fayed, Mohammad Saadati, Davood Shahriari, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2021 « Effect of homogenization and solution treatments time on the elevated-temperature mechanical behavior of Inconel 718 fabricated by laser powder bed fusion ». Scientific Reports vol. 11 , nº 1
Eslam M. Fayed, Mohammad Saadati, Davood Shahriari, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2021 « Optimization of the post-process heat treatment of inconel 718 superalloy fabricated by laser powder bed fusion process ». Metals vol. 11 , nº 1
B. V. Feujofack Kemda, N. Barka, M. Jahazi, D. Osmani. 2021 « Modeling of phase transformation kinetics in resistance spot welding and investigation of effect of post weld heat treatment on weld microstructure ». Metals and Materials International vol. 27 , nº 5. p. 1205-1223
Mahshad Javidikia, Morteza Sadeghifar, Victor Songmene, Mohammad Jahazi. 2021 « 3D FE modeling and experimental analysis of residual stresses and machining characteristics induced by dry, MQL, and wet turning of AA6061-T6 ». Machining Science and Technology vol. 25 , nº 6. p. 957-983
Mahshad Javidikia, Morteza Sadeghifar, Victor Songmene, Mohammad Jahazi. 2021 « Low and high speed orthogonal cutting of AA6061-T6 under dry and flood-coolant modes: Tool wear and residual stress measurements and predictions ». Materials vol. 14 , nº 15
Makarim Khan, Davood Shahriari, Mohammad Jahazi, Jean-Benoit Morin. 2021 « Interactions between dynamic softening and strengthening mechanisms during hot forging of a high-strength steel ». Frontiers in Mechanical Engineering vol. 7
J. H. Liu, N. Binot, D. Delagnes, M. Jahazi. 2021 « Influence of the cooling rate below Ms on the martensitic transformation in a low alloy medium-carbon steel ». Journal of Materials Research and Technology vol. 12. p. 234-242
Roghayeh Nikbakht, Mohammad Saadati, Taek-Soo Kim, Mohammad Jahazi, Hyoung Seop Kim, Bertrand Jodoin. 2021 « Cold spray deposition characteristic and bonding of CrMnCoFeNi high entropy alloy ». Surface and Coatings Technology vol. 425
Seyedmohammad Tabaie, Farhad Rezai-Aria, Bertrand C. D. Flipo, Jonathan Cormier, Mohammad Jahazi. 2021 « Post-weld heat treatment of additively manufactured inconel 718 welded to forged ni-based superalloy AD730 by linear friction welding ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 52 , nº 8. p. 3475-3488
Seyedmohammad Tabaie, Farhad Rézaï-Aria, Bertrand C. D. Flipo, Mohammad Jahazi. 2021 « Grain size and misorientation evolution in linear friction welding of additively manufactured IN718 to forged superalloy AD730™ ». Materials Characterization vol. 171
M. Zorgani, C. Garcia-Mateo, M. Jahazi. 2021 « Effects of ausforming temperature on carbide-free bainite transformation and its correlation to the transformation plasticity strain in a medium C- Si-rich steel ». Materials Characterization vol. 176
M. Zorgani, C. Garcia-Mateo, M. Jahazi. 2021 « Microstructural evolution during tempering of an ausformed carbide-free low temperature bainitic steel ». Materials and Design vol. 210
M. Zaid Ahmed, K. Chadha, S. R. Reddy, D. Shahriari, P. P. Bhattacharjee, M. Jahazi. 2020 « Influence of process parameters on microstructure evolution during hot deformation of a Eutectic High-Entropy Alloy (EHEA) ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 51 , nº 12. p. 6406-6420
Alireza Aleyari, Omid Majidi, Nicolas Bombardier, Xuan-Tan Pham, Mohammad Jahazi. 2020 « Finite element and experimental analysis of the preheating stage of High Speed Blow Forming (HSBF) process ». Journal of Manufacturing Processes vol. 49. p. 10-17
Frédéric Bédard, Mohammad Jahazi, Victor Songmene. 2020 « Die-sinking EDM of Al6061-T6: interactions between process parameters, process performance, and surface characteristics ». International Journal of Advanced Manufacturing Technology vol. 107 , nº 1-2. p. 333-342
Y. Bouissa, N. Bohlooli, D. Shahriari, H. Champliaud, J. B. Morin, M. Jahazi. 2020 « FEM modeling and experimental validation of quench-induced distortions of large size steel forgings ». Journal of Manufacturing Processes vol. 58. p. 592-605
Thiago Bruno Carneiro, Samuel Filgueiras Rodrigues, Clodualdo Aranas, Fulvio Siciliano, Eden Santos Silva, Gedeon Silva Reis, Edson Jansen Pedrosa Miranda, Valdemar Silva Leal, Mohammad Jahazi, John Joseph Jonas. 2020 « Retransformation of dynamically induced ferrite during physical simulation of Steckel mill hot rolling ». Journal of Materials Research and Technology vol. 9 , nº 5. p. 10254-10264
K. Chadha, C. Aranas, D. Shahriari, M. Jahazi, J. G. Spray. 2020 « The effect of retained work hardening on the driving force for dynamic transformation ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 51 , nº 11. p. 5617-5622
Oussama Chaieb, Oluwole A. Olufayo, Victor Songmene, Mohammad Jahazi. 2020 « Investigation on surface quality of a rapidly solidified Al–50%Si alloy component for deep-space applications ». Materials vol. 13 , nº 15
A. Chamanfar, S. M. Chentouf, M. Jahazi, L. P. Lapierre-Boire. 2020 « Austenite grain growth and hot deformation behavior in a medium carbon low alloy steel ». Journal of Materials Research and Technology vol. 9 , nº 6. p. 12102-12114
M. Chegini, M. R. Aboutalebi, S. H. Seyedein, G. R. Ebrahimi, M. Jahazi. 2020 « Study on hot deformation behavior of AISI 414 martensitic stainless steel using 3D processing map ». Journal of Manufacturing Processes vol. 56. p. 916-927
Eslam M. Fayed, Davood Shahriari, Mohammad Saadati, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2020 « Influence of homogenization and solution treatments time on the microstructure and hardness of Inconel 718 fabricated by laser powder bed fusion process ». Materials vol. 13 , nº 11
B. V. Feujofack Kemda, Noureddine Barka, M. Jahazi, D. Osmani. 2020 « Optimization of resistance spot welding process applied to A36 mild steel and hot dipped galvanized steel based on hardness and nugget geometry ». International Journal of Advanced Manufacturing Technology vol. 106 , nº 5-6. p. 2477-2491
Mahshad Javidikia, Morteza Sadeghifar, Victor Songmene, Mohammad Jahazi. 2020 « Effect of turning environments and parameters on surface integrity of AA6061-T6: experimental analysis, predictive modeling, and multi-criteria optimization ». International Journal of Advanced Manufacturing Technology vol. 110 , nº 9. p. 2669-2683
Mahshad Javidikia, Morteza Sadeghifar, Victor Songmene, Mohammad Jahazi. 2020 « On the impacts of tool geometry and cutting conditions in straight turning of aluminum alloys 6061-T6: an experimentally validated numerical study ». International Journal of Advanced Manufacturing Technology vol. 106 , nº 9-10. p. 4547–4565
Hossein Monajati, Mariem Zoghlami, Amevi Tongne, Mohammad Jahazi. 2020 « Assessing microstructure-local mechanical properties in friction stir welded 6082-T6 aluminum alloy ». Metals vol. 10 , nº 9
Morteza Sadeghifar, Mahshad Javidikia, Victor Songmene, Mohammad Jahazi. 2020 « Finite element simulation-based predictive regression modeling and optimum solution for grain size in machining of Ti6Al4V alloy: Influence of tool geometry and cutting conditions ». Simulation Modelling Practice and Theory vol. 104
Ahad Shafiee, Mahmoud Nili-Ahmadabadi, Hyoung Seop Kim, Mohammad Jahazi. 2020 « Development and microstructural characterization of a new wrought high entropy superalloy ». Metals and Materials International vol. 26 , nº 5. p. 591-602
Seyedmohammad Tabaie, Farhad Rézaï-Aria, Mohammad Jahazi. 2020 « Microstructure evolution of selective laser melted inconel 718: Influence of high heating rates ». Metals vol. 10 , nº 5
Ali Vedaei-Sabegh, Jean-Benoit Morin, Mohammad Jahazi. 2020 « Influence of nickel on high-temperature oxidation and characteristics of oxide layers in two high-strength steels ». Steel Research International vol. 91 , nº 4
C. Zhang, M. Jahazi, R. Tremblay. 2020 « Simulation and experimental validation of the effect of superheat on macrosegregation in large-size steel ingots ». International Journal of Advanced Manufacturing Technology vol. 107 , nº 1-2. p. 167-175
Chunping Zhang, Mohammad Jahazi, Paloma Isabel Gallego. 2020 « On the impact of microsegregation model on the thermophysical and solidification behaviors of a large size steel ingot ». Metals vol. 10 , nº 1
M. Zorgani, Carlos Garcia-Mateo, M. Jahazi. 2020 « The role of ausforming in the stability of retained austenite in a medium-C carbide-free bainitic steel ». Journal of Materials Research and Technology vol. 9 , nº 4. p. 7762-7776
Ashwaq A. Al-Hashedi, Marco Laurenti, Mohamed Amine Mezour, Tayebeh Basiri, Heithem Touazine, Mohamed Jahazi, Faleh Tamimi. 2019 « Advanced inorganic nanocomposite for decontaminating titanium dental implants ». Journal of Biomedical Materials Research - Part B Applied Biomaterials vol. 107 , nº 3. p. 761-772
Nima Bohlooli Arkhazloo, Yassine Bouissa, Farzad Bazdidi-Tehrani, Mohammad Jadidi, Jean-Benoit Morin, Mohammad Jahazi. 2019 « Experimental and unsteady CFD analyses of the heating process of large size forgings in a gas-fired furnace ». Case Studies in Thermal Engineering vol. 14
Yassine Bouissa, Davood Shahriari, Henri Champliaud, Mohammad Jahazi. 2019 « Prediction of heat transfer coefficient during quenching of large size forged blocks using modeling and experimental validation ». Case Studies in Thermal Engineering vol. 13
K. Chadha, Davood Shahriari, C. Jr. Aranas, Louis-Philippe Lapierre-Boire, Mohammad Jahazi. 2019 « On the role of chromium in dynamic transformation of austenite ». Metals and Materials International vol. 25 , nº 3. p. 559-569
Frederic Dupont-Marillia, Mohammad Jahazi, Serge Lafreniere, Pierre Belanger. 2019 « Design and optimisation of a phased array transducer for ultrasonic inspection of large forged steel ingots ». NDT and E International vol. 103. p. 119-129
Frederic Dupont-Marillia, Mohammad Jahazi, Serge Lafreniere, Pierre Belanger. 2019 « Influence of local mechanical parameters on ultrasonic wave propagation in large forged steel ingots ». Journal of Nondestructive Evaluation vol. 38 , nº 3
G. R. Ebrahimi, A. Momeni, H. R. Ezatpour, M. Jahazi, P. Bocher. 2019 « Dynamic recrystallization in Mone1400 Ni-Cu alloy: mechanism and role of twinning ». Materials Science and Engineering: A vol. 744. p. 376-385
A. Fall, H. Monajati, A. Khodabandeh, M. H. Fesharaki, H. Champliaud, M. Jahazi. 2019 « Local mechanical properties, microstructure, and microtexture in friction stir welded Ti-6Al-4V alloy ». Materials Science and Engineering: A vol. 749. p. 166-175
Omid Majidi, Mohammad Jahazi, Nicolas Bombardier. 2019 « A viscoplastic model based on a variable strain rate sensitivity index for superplastic sheet metals ». International Journal of Material Forming vol. 12 , nº 4. p. 693-702
Omid Majidi, Mohammad Jahazi, Nicolas Bombardier. 2019 « Prediction of material behavior during biaxial stretching of superplastic 5083 aluminum alloy ». International Journal of Advanced Manufacturing Technology vol. 102 , nº 5-8. p. 2357-2366
F. Masoumi, D. Shahriari, H. Monajati, J. Cormier, B. C. D. Flipo, A. Devaux, M. Jahazi. 2019 « Linear friction welding of AD730TM Ni-base superalloy: process-microstructure-property interactions ». Materials and Design vol. 183
Samuel F. Rodrigues, Fulvio Siciliano, Clodualdo Aranas Jr., Eden S. Silva, Gedeon S. Reis, Mohammad Jahazi, John J. Jonas. 2019 « Dynamic phase transformation behavior of a Nb-microalloyed steel during roughing passes at temperatures above the Ae3 ». Metals vol. 9 , nº 3
Mohammad Saadati, Amir Keyvan Edalat Nobarzad, Mohammad Jahazi. 2019 « On the hot cracking of HSLA steel welds: Role of epitaxial growth and HAZ grain size ». Journal of Manufacturing Processes vol. 41. p. 242-251
Ahad Shafiee, Jongun Moon, Hyoung Seop Kim, Mohammad Jahazi, Mahmoud Nili-Ahmadabadi. 2019 « Precipitation behaviour and mechanical properties of a new wrought high entropy superalloy ». Materials Science and Engineering: A vol. 749. p. 271-280
Seyedmohammad Tabaie, Davood Shahriari, Cléa Plouze, Alexandre Devaux, Jonathan Cormier, Mohammad Jahazi. 2019 « Hot ductility behavior of AD730™ nickel-base superalloy ». Materials Science and Engineering: A vol. 766
Heithem Touazine, Kanwal Chadha, Mohammad Jahazi, Philippe Bocher. 2019 « Characterization of subsurface microstructural alterations induced by hard turning of Inconel 718 ». Journal of Materials Engineering and Performance vol. 28 , nº 11. p. 7016-7024
Clodualdo Jr. Aranas, Samuel Rodrigues, Ameth Fall, Mohammad Jahazi, John Jonas. 2018 « Determination of the critical stress associated with dynamic phase transformation in steels by means of free energy method ». Metals vol. 8 , nº 5
Emna Ben Fredj, Hadi Ghasemi Nanesa, Mohammad Jahazi, Jean-Benoit Morin. 2018 « Influence of initial microstructure and grain size on transformation of bainite to austenite in large size forgings ». Journal of Iron and Steel Research International vol. 25 , nº 5. p. 554-562
Matthieu Bitterlin, Davood Shahriari, Louis-Philippe Lapierre-Boire, Jean-Benoît Morin, Mohammad Jahazi. 2018 « Hot deformation behavior of a nickel-modified AISI 4330 steel ». ISIJ International vol. 58 , nº 9. p. 1711-1720
K. Chadha, Z. Ahmed, C. Aranas, D. Shahriari, M. Jahazi. 2018 « Influence of strain rate on dynamic transformation of austenite in an as-cast medium-carbon low-alloy steel ». Materialia vol. 1. p. 155-167
Baoqi Guo, Clodualdo Aranas, Anes Foul, Xiankun Ji, Ameth Fall, Mohammad Jahazi, John J. Jonas. 2018 « Effect of multipass deformation at elevated temperatures on the flow behavior and microstructural evolution in Ti-6Al-4V ». Materials Science and Engineering: A vol. 729. p. 119-124
Baoqi Guo, Ameth Fall, Mohammad Jahazi, John J. Jonas. 2018 « Kinetics of post-dynamic coarsening and reverse transformation in Ti-6Al-4V ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 49 , nº 12. p. 5956-5961
Abdelhalim Loucif, Emna Ben Fredj, Nathan Harris, Davood Shahriari, Mohammad Jahazi, Louis-Philippe Lapierre-Boire. 2018 « Evolution of A-type macrosegregation in large size steel ingot after multistep forging and heat treatment ». Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science vol. 49 , nº 3. p. 1046-1055
Abdelhalim Loucif, Matthieu Bitterlin, Mohammad Jahazi, Rami Tremblay, Jean-Benoît Morin, Louis-Philippe Lapierre-Boire. 2018 « Determination of the root causes for cracking in a large-size cast ingot of AISI 4317 steel using microstructural analysis ». Metallography, Microstructure, and Analysis vol. 7 , nº 2. p. 203-208
Mountadar Lyassami, Davood Shahriari, Emna Ben Fredj, Jean-Benoit Morin, Mohammad Jahazi. 2018 « Numerical simulation of water quenching of large size steel forgings: Effects of macrosegregation and grain size on phase distribution ». Journal of Manufacturing and Materials Processing vol. 2 , nº 2
Omid Majidi, Mohammad Jahazi, Nicolas Bombardier. 2018 « Finite element simulation of high-speed blow forming of an automotive component ». Metals vol. 8 , nº 11
Mahdi Masoumi Khalilabad, Yasser Zedan, Damien Texier, Mohammad Jahazi, Philippe Bocher. 2018 « Effect of tool geometry and welding speed on mechanical properties of dissimilar AA2198–AA2024 FSWed joint ». Journal of Manufacturing Processes vol. 34, part A. p. 86-95
F. Masoumi, L. Thebaud, D. Shahriari, M. Jahazi, J. Cormier, A. Devaux, B. C. D. Flipo. 2018 « High temperature creep properties of a linear friction welded newly developed wrought Ni-based superalloy ». Materials Science and Engineering: A vol. 710. p. 214-226
Ahmad Mostafa, Davood Shahriari, Ignacio Picazo Rubio, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2018 « Hot compression behavior and microstructure of selectively laser-melted IN718 alloy ». International Journal of Advanced Manufacturing Technology vol. 96 , nº 1-4. p. 371-385
Raiyan Seede, Ahmad Mostafa, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2018 « Microstructural and microhardness evolution from homogenization and hot isostatic pressing on selective laser melted inconel 718: Structure, texture, and phases ». Journal of Manufacturing and Materials Processing vol. 2 , nº 2
Binhan Sun, Fateh Fazeli, Colin Scott, Baoqi Guo, Clodualdo Aranas, Xin Chu, Mohammad Jahazi, Stephen Yue. 2018 « Microstructural characteristics and tensile behavior of medium manganese steels with different manganese additions ». Materials Science and Engineering: A vol. 729. p. 496-507
Seyyed Hesamondin Talebi, Mohammad Jahazi, Haikouhi Melkonyan. 2018 « Retained austenite decomposition and carbide precipitation during isothermal tempering of a medium-carbon low-alloy bainitic steel ». Materials vol. 11 , nº 8
C. Zhang, D. Shahriari, A. Loucif, H. Melkonyan, M. Jahazi. 2018 « Influence of thermomechanical shrinkage on macrosegregation during solidification of a large-sized high-strength steel ingot ». International Journal of Advanced Manufacturing Technology vol. 99 , nº 9-12. p. 3035-3048
Chunping Zhang, Abdelhalim Loucif, Mohammad Jahazi, Rami Tremblay, Louis-Philippe Lapierre. 2018 « On the effect of filling rate on positive macrosegregation patterns in large size cast steel ingots ». Applied Sciences vol. 8 , nº 10
Ali Aidibe, Mojtaba Kamali Nejad, Antoine Tahan, Mohammad Jahazi, Sylvain G. Cloutier. 2017 « Surface characterization of die inserts used for LED lamp plastic lenses ». International Journal of Advanced Manufacturing Technology vol. 88 , nº 9-12. p. 3395-3403
Clodualdo Aranas, Anes Foul, Baoqi Guo, Ameth Fall, Mohammad Jahazi, John J. Jonas. 2017 « Determination of the critical stress for the initiation of dynamic transformation in commercially pure titanium ». Scripta Materialia vol. 133. p. 83-85
Ali Bonakdar, Marjan Molavi-Zarandi, Ahmad Chamanfar, Mohammad Jahazi, Arash Firoozrai, Eric Morin. 2017 « Finite element modeling of the electron beam welding of Inconel-713LC gas turbine blades ». Journal of Manufacturing Processes vol. 26. p. 339-354
K. Chadha, D. Shahriari, R. Tremblay, P. P. Bhattacharjee, M. Jahazi. 2017 « Deformation and recrystallization behavior of the cast structure in large size, high strength steel ingots: Experimentation and modeling ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 48 , nº 9. p. 4297-4313
Ahmad Chamanfar, Hossein Monajati, Alex Rosenbaum, Mohammad Jahazi, Ali Bonakdar, Eric Morin. 2017 « Microstructure and mechanical properties of surface and subsurface layers in broached and shot-peened Inconel-718 gas turbine disc fir-trees ». Materials Characterization vol. 132. p. 53-68
S. M. Chentouf, T. Belhadj, N. Bombardier, N. Brodusch, R. Gauvin, M. Jahazi. 2017 « Influence of predeformation on microstructure evolution of superplastically formed Al 5083 alloy ». International Journal of Advanced Manufacturing Technology vol. 88 , nº 9-12. p. 2929-2937
A. Fall, M. Jahazi, A. R. Khodabandeh, M. H. Fesharakib. 2017 « Effect of process parameters on microstructure and mechanical properties of friction stir-welded Ti-6Al-4V joints ». International Journal of Advanced Manufacturing Technology vol. 91 , nº 5-8. p. 2919-2931
Nathan Harris, Davood Shahriari, Mohammad Jahazi. 2017 « Development of a fast converging material specific void closure model during ingot forging ». Journal of Manufacturing Processes vol. 26. p. 131-141
S. Hesamodin Talebi, Hadi Ghasemi-Nanesa, Mohammad Jahazi, Haikouhi Melkonyan. 2017 « In situ study of phase transformations during non-isothermal tempering of bainitic and martensitic microstructures ». Metals vol. 7 , nº 9
John J. Jonas, Clodualdo Aranas, Ameth Fall, Mohammad Jahazi. 2017 « Transformation softening in three titanium alloys ». Materials & Design vol. 113. p. 305-310
F. Masoumi, D. Shahriari, M. Jahazi, J. Cormier, B. C. D. Flipo. 2017 « On the occurrence of liquation during linear friction welding of Ni-based superalloys ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 48A , nº 6. p. 2886-2899
Ahmad Mostafa, Ignacio Picazo Rubio, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2017 « Structure, texture and phases in 3D printed IN718 alloy subjected to homogenization and HIP treatments ». Metals vol. 7 , nº 6
Mohammad Saadati, Rasoul Azari Khosroshahi, Golamreza Ebrahimi, Mohammad Jahazi. 2017 « Twin-assisted precipitation during hot compression of an Mg-Gd-Zn-Zr magnesium alloy ». Materials Science and Engineering: A vol. 706. p. 142-152
Mohammad Saadati, Rasoul Azari Khosroshahi, Gholamreza Ebrahimi, Mohammad Jahazi. 2017 « Formation of precipitates in parallel arrays on LPSO structures during hot deformation of GZ41K magnesium alloy ». Materials Characterization vol. 131. p. 234-243
Binhan Sun, Nicolas Vanderesse, Fateh Fazeli, Colin Scott, Jianqiang Chen, Philippe Bocher, Mohammad Jahazi, Stephen Yue. 2017 « Discontinuous strain-induced martensite transformation related to the Portevin-Le Chatelier effect in a medium manganese steel ». Scripta Materialia vol. 133. p. 9-13
Amèvi Tongne, Christophe Desrayaud, Mohammad Jahazi, Eric Feulvarch. 2017 « On material flow in friction stir welded al alloys ». Journal of Materials Processing Technology vol. 239. p. 284-296
Heithem Touazine, Jordan Akab, Mohammad Jahazi, Antoine Tahan, Walid Jomaa, Philippe Bocher. 2017 « Modeling of the microstructure alteration induced by hard turning of Inconel 718 ». International Journal of Advanced Manufacturing Technology vol. 93 , nº 9-12. p. 3705-3712
Heithem Touazine, Mohammad Jahazi, Philippe Bocher. 2017 « Accurate determination of damaged subsurface layers in machined Inconel 718 ». International Journal of Advanced Manufacturing Technology vol. 88 , nº 9-12. p. 3419-3427
M. Anderson, F. Bridier, J. Gholipour, M. Jahazi, P. Wanjara, P. Bocher, J. Savoie. 2016 « Mechanical and metallurgical evolution of stainless steel 321 in a multi-step forming process ». Journal of Materials Engineering and Performance vol. 25 , nº 4. p. 1526-1538
Matthieu Bitterlin, Abdelhalim Loucif, Nicolas Charbonnier, Mohammad Jahazi, Louis-Philippe Lapierre-Boire, Jean-Benoît Morin. 2016 « Cracking mechanisms in large size ingots of high nickel content low alloyed steel ». Engineering Failure Analysis vol. 68. p. 122-131
K. Chadha, D. Shahriari, M. Jahazi. 2016 « Constitutive modelling of ingot breakdown process of low alloy steels ». Metallurgia Italiana vol. 108 , nº 4. p. 5-12
Ameth Fall, Mostafa Hashemi Fesharaki, Ali Reza Khodabandeh, Mohammad Jahazi. 2016 « Tool wear characteristics and effect on microstructure in Ti-6Al-4V friction stir welded joints ». Metals vol. 6 , nº 11. p. 275-286
Hadi Ghasemi-Nanesa, Heithem Touazine, Mohammad Jahazi. 2016 « Influence of cryogenic process parameters on microstructure and hardness evolution of AISI D2 tool steel ». International Journal of Advanced Manufacturing Technology vol. 85 , nº 1. p. 881-890
Rupanjit Grewal, Clodualdo Aranas, Kanwal Chadha, Davood Shahriari, Mohammad Jahazi, John J. Jonas. 2016 « Formation of Widmanstatten ferrite at very high temperatures in the austenite phase field ». Acta Materialia vol. 109. p. 23-31
F. Masoumi, M. Jahazi, D. Shahriari, J. Cormier. 2016 « Coarsening and dissolution of γ′ precipitates during solution treatment of AD730™ Ni-based superalloy: Mechanisms and kinetics models ». Journal of Alloys and Compounds vol. 658. p. 981-995
F. Masoumi, D. Shahriari, M. Jahazi, J. Cormier, A. Devaux. 2016 « Kinetics and mechanisms of γ′ reprecipitation in a Ni-based superalloy ». Scientific Reports vol. 6
Hadi Ghasemi Nanesa, Julien Boulgakoff, Mohammad Jahazi. 2016 « Influence of prior cold deformation on microstructure evolution of AISI D2 tool steel after hardening heat treatment ». Journal of Manufacturing Processes vol. 22. p. 115-119
Emad Salari, Mohammad Jahazi, Alireza Khodabandeh, Hadi Ghasemi Nanesa. 2016 « Friction stir lap welding of 5456 aluminum alloy with different sheet thickness: process optimization and microstructure evolution ». International Journal of Advanced Manufacturing Technology vol. 82 , nº 1-4. p. 39-48
G. D. Sathiaraj, C. W. Tsai, J. W. Yeh, M. Jahazi, P. P. Bhattacharjee. 2016 « The effect of heating rate on microstructure and texture formation during annealing of heavily cold-rolled equiatomic CoCrFeMnNi high entropy alloy ». Journal of Alloys and Compounds vol. 688. p. 752-761
A. Chamanfar, M. Jahazi, A. Bonakdar, E. Morin, A. Firoozrai. 2015 « Cracking in fusion zone and heat affected zone of electron beam welded Inconel-713LC gas turbine blades ». Materials Science and Engineering: A vol. 642. p. 230-240
A. Chamanfar, Mohammad Jahazi, J. Cormier. 2015 « A review on inertia and linear friction welding of Ni-based superalloys ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 46 , nº 4. p. 1639-1669
A. Chamanfar, Mohammad Jahazi, J. Gholipour, P. Wanjara, S. Yue. 2015 « Analysis of integrity and microstructure of linear friction welded Waspaloy ». Materials Characterization vol. 104. p. 149-161
H. Ghasemi Nanesa, Mohammad Jahazi. 2015 « Alternative phase transformation path in cryogenically treated AISI D2 tool steel ». Materials Science and Engineering: A vol. 634. p. 32-36
Hadi Ghasemi-Nanesa, Mohammad Jahazi, Reza Naraghi. 2015 « Martensitic transformation in AISI D2 tool steel during continuous cooling to 173K ». Journal of Materials Science vol. 50 , nº 17. p. 5758-5768
Ilyes Maamri, Noureddine Barka, Abderrazak El Ouafi, Mohammad Jahazi. 2015 « A sensitivity study of 4340 steel hardness profile heat-treated by laser ». International Journal of Emerging Technology and Advanced Engineering vol. 5 , nº 9. p. 7-13
A. Tongne, Mohammad Jahazi, E. Feulvarch, C. Desrayaud. 2015 « Banded structures in friction stir welded Al alloys ». Journal of Materials Processing Technology vol. 221. p. 269-278
Noureddine Barka, Ahmed Chebak, Abderrazak El Ouafi, Mohammad Jahazi, Abdellah Menou. 2014 « A new approach in optimizing the induction heating process using flux concentrators: Application to 4340 steel spur gear ». Journal of Materials Engineering and Performance vol. 23 , nº 9. p. 3092-3099
A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, S. Yue. 2014 « Evolution of flow stress and microstructure during isothermal compression of Waspaloy ». Materials Science and Engineering: A vol. 615. p. 497-510
S. M. Chentouf, M. Jahazi, L. P. Lapierre-Boire, S. Godin. 2014 « Characteristics of austenite transformation during post forge cooling of large-size high strength steel Ingots ». Metallography, Microstructure, and Analysis vol. 3 , nº 4. p. 281-297
Mostafa Dadaei, Hamid Omidvar, Behrouz Bagheri, Mohammad Jahazi, Mahmoud Abbasi. 2014 « The effect of SiC/Al2O3 particles used during FSP on mechanical properties of AZ91 magnesium alloy ». International Journal of Materials Research vol. 105 , nº 4. p. 369-374
Gholam Reza Ebrahimi, Amir Momeni, Mohammad Jahazi, Philippe Bocher. 2014 « Dynamic recrystallization and precipitation in 13Cr super-martensitic stainless steels ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 45 , nº 4. p. 2219-2231
Hadi Ghasemi-Nanesa, Mohammad Jahazi. 2014 « Simultaneous enhancement of strength and ductility in cryogenically treated AISI D2 tool steel ». Materials Science and Engineering: A vol. 598. p. 413-419
R. Keivani, Mohammad Jahazi, Tan Pham, A. R. Khodabandeh, M. R. Afshar. 2014 « Predicting residual stresses and distortion during multisequence welding of large size structures using FEM ». International Journal of Advanced Manufacturing Technology vol. 73 , nº 1-4. p. 409-419
A. Momeni, G. R. Ebrahimi, Mohammad Jahazi, Philippe Bocher. 2014 « Microstructure evolution at the onset of discontinuous dynamic recrystallization: a physics-based model of subgrain critical size ». Journal of Alloys and Compounds vol. 587. p. 199-210
Emad Salari, Mohammad Jahazi, Alireza Khodabandeh, Hadi Ghasemi-Nanesa. 2014 « Influence of tool geometry and rotational speed on mechanical properties and defect formation in friction stir lap welded 5456 aluminum alloy sheets ». Materials and Design vol. 58. p. 381-389
Melissa Anderson, Javad Gholipour, Florent Bridier, Philippe Bocher, Mohammad Jahazi, Jean Savoie, Priti Wanjara. 2013 « Improving the formability of stainless steel 321 through multistep deformation for hydroforming applications ». Transactions of the Canadian Society for Mechanical Engineering vol. 37 , nº 1. p. 39-52
N. Boutana, P. Bocher, M. Jahazi. 2013 « Discrepancy between fatigue and dwell-fatigue behavior of near alpha titanium alloys simulated by cellular automata ». International Journal of Fatigue vol. 51. p. 49-56
A. Chamanfar, L. Sarrat, M. Jahazi, M. Asadi, A. Weck, A. K. Koul. 2013 « Microstructural characteristics of forged and heat treated Inconel-718 disks ». Materials and Design vol. 52. p. 791-800
Ahmad Chamanfar, Mohammad Jahazi, Javad Gholipour, Priti Wanjara, Stephen Yue. 2013 « Modeling grain size and strain rate in linear friction welded Waspaloy ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 44 , nº 9. p. 4230-4238
F. Jalilian, M. Jahazi, R. A. L. Drew. 2013 « Microstructure evolution during transient liquid phase bonding of alloy 617 ». Metallography, Microstructure, and Analysis vol. 2 , nº 3. p. 170-182
A. R. Maldar, G. R. Ebrahimi, Meysam Haghshenas, M. Jahazi, P. Bocher. 2013 « Thermomechanical characterization of Mg-9Al-1Zn alloy using power dissipation maps ». Journal of Materials Engineering and Performance vol. 22 , nº 11. p. 3306-3314
A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, S. Yue. 2012 « Maximizing the integrity of linear friction welded Waspaloy ». Materials Science and Engineering: A vol. 555. p. 117-130
A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, S. Yue. 2012 « Suppressed liquation and microcracking in linear friction welded WASPALOY ». Materials and Design vol. 36. p. 113-122
Abbas Tamadon, Ali Shokuhfar, Hossein Yoozbashizadeh, Mohammad Jahazi. 2012 « The role of carbon nanotubes in synthesis of TaC nanoparticles by gas – solid reaction ». Advanced Processes in Materials vol. 6 , nº 3 (22). p. 1-7
X. Cao, M. Jahazi. 2011 « Effect of tool rotational speed and probe length on lap joint quality of a friction stir welded magnesium alloy ». Materials and Design vol. 32 , nº 1. p. 1-11
A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, S. Yue. 2011 « Mechanical property and microstructure of linear friction welded WASPALOY ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 42 , nº 3. p. 729-744
E. Dalgaard, P. Wanjara, G. Trigo, M. Jahazi, G. Comeau, J. J. Jonas. 2011 « Linear friction welding of Al-Cu Part 2 - interfacial characteristics ». Canadian Metallurgical Quarterly vol. 50 , nº 4. p. 360-370
N. Bastajib, N. Boutana, P. Bocher, M. Jahazi. 2010 « Application of cellular automata method to simulate the hot deformation behavior of a dual phase titanium alloy ». Technische Mechanik vol. 30 , nº 1-3
Antoine Bres, Bruno Monsarrat, Laurent Dubourg, Lionel Birglen, Claude Perron, Mohammad Jahazi, Luc Baron. 2010 « Simulation of friction stir welding using industrial robots ». Industrial Robot vol. 37 , nº 1. p. 36-50
L. Dubourg, A. Merati, M. Jahazi. 2010 « Process optimisation and mechanical properties of friction stir lap welds of 7075-T6 stringers on 2024-T3 skin ». Materials and Design vol. 31 , nº 7. p. 3324-3330
F. Gemme, Y. Verreman, L. Dubourg, M. Jahazi. 2010 « Numerical analysis of the dwell phase in friction stir welding and comparison with experimental data ». Materials Science and Engineering: A vol. 527 , nº 16-17. p. 4152-4160
X. Cao, M. Jahazi. 2009 « Effect of welding speed on butt joint quality of Ti–6Al–4V alloy welded using a high-power Nd:YAG laser ». Optics and Lasers in Engineering vol. 47 , nº 11. p. 1231-1241
X. Cao, M. Jahazi. 2009 « Effect of welding speed on the quality of friction stir welded butt joints of a magnesium alloy ». Materials and Design vol. 30 , nº 6. p. 2033-2042
X. Cao, B. Rivaux, M. Jahazi, J. Cuddy, A. Birur. 2009 « Effect of pre- and post-weld heat treatment on metallurgical and tensile properties of Inconel 718 alloy butt joints welded using 4 kW Nd:YAG laser ». Journal of Materials Science vol. 44 , nº 17. p. 4557-4571
E. Coman, K. Ghosh, M. Jahazi, L. Dubourg. 2009 « A study of the deformation and residual stress in an aircraft fuselage panel welded by friction stir welding ». International Journal of Advanced Manufacturing System vol. 11 , nº 2. p. 75-84
M. Haghshenas, A. Zarei-Hanzaki, M. Jahazi. 2009 « An investigation to the effect of deformation-heat treatment cycle on the eutectic morphology and mechanical properties of a Thixocast A356 alloy ». Materials Characterization vol. 60 , nº 8. p. 817-823
C. Liu, D. L. Chen, S. Bhole, X. Cao, M. Jahazi. 2009 « Polishing-assisted galvanic corrosion in the dissimilar friction stir welded joint of AZ31 magnesium alloy to 2024 aluminum alloy ». Materials Characterization vol. 60 , nº 5. p. 370-376
P. Wanjara, M. Jahazi. 2009 « Application of shear punch testing to study microstructure-property relationships in electron beam welded 17-4 PH stainless steel ». Canadian Metallurgical Quarterly vol. 48 , nº 3. p. 317-326
N. Afrin, D. L. Chen, X. Cao, M. Jahazi. 2008 « Microstructure and tensile properties of friction stir welded AZ31B magnesium alloy ». Materials Science and Engineering: A vol. 472 , nº 1-2. p. 179-186
H. Al-Kazzaz, M. Medraj, X. Cao, M. Jahazi. 2008 « Nd:YAG laser welding of aerospace grade ZE41A magnesium alloy: modeling and experimental investigations ». Materials Chemistry and Physics vol. 109 , nº 1. p. 61-76
Haider Al-Kazzaz, Xinjin Cao, Mohammad Jahazi, Mamoun Medraj. 2008 « Reliability of laser welding process for ZE41A-T5 magnesium alloy sand castings ». Materials Transactions vol. 49 , nº 4. p. 774-781
N. Boutana, P. Bocher, M. Jahazi, D. Piot, F. Montheillet. 2008 « Microstructural modeling of cold creep/fatigue in near alpha titanium alloys using cellular automata method ». Transactions of the Canadian Society for Mechanical Engineering vol. 32 , nº 2. p. 195-213
N. Boutana, Philippe Bocher, M. Jahazi, D. Piot, F. Montheillet. 2008 « The microstructural modeling of room temperature creep in titanium alloys using cellular automata model ». International Journal of Microstructure and Materials Properties vol. 3 , nº 4-5. p. 642-653
X. Cao, M. Jahazi. 2008 « Overview of friction stir and laser welding techniques for lightweight alloys ». Canadian Welding Association Journal. p. 19-30
X. Cao, M. Jahazi, H. Al-Kazzaz, M. Medraj. 2008 « Modelling of work-hardening behaviour for laser welded magnesium alloy ». International Journal of Materials Research vol. 99 , nº 2. p. 216-221
X. Cao, M. Jahazi, J. Fournier, M. Alain. 2008 « Optimization of bead spacing during laser cladding of ZE41A-T5 magnesium alloy castings ». Journal of Materials Processing Technology vol. 205 , nº 1–3. p. 322-331
X. Cao, M. Xiao, M. Jahazi, J. Fournier, M. Alain. 2008 « Optimization of processing parameters during laser cladding of ZE41A-T5 magnesium alloy castings using Taguchi method ». Materials and Manufacturing Processes vol. 23 , nº 4. p. 413-418
L. Germain, N. Gey, M. Humbert, P. Vo, M. Jahazi, Philippe Bocher. 2008 « Texture heterogeneities induced by subtransus processing of near alpha titanium alloys ». Acta Materialia vol. 56 , nº 16. p. 4298-4308
Catalin Mandache, Laurent Dubourg, Ali Merati, Mohammad Jahazi. 2008 « Pulsed eddy current testing of friction stir welds ». Materials Evaluation vol. 66 , nº 4. p. 382-387
Caroline Mary, Mohammad Jahazi. 2008 « Multi-scale analysis of IN-718 microstructure evolution during linear friction welding ». Advanced Engineering Materials vol. 10 , nº 6. p. 573-578
P. Vo, M. Jahazi, S. Yue. 2008 « Recrystallization during thermomechanical processing of IMI834 ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 39 , nº 12. p. 2965-2980
X. Wang, M. Jahazi, S. Yue. 2008 « Investigation of α platelet boundaries in a near-α titanium alloy ». Materials Science and Engineering: A vol. 492 , nº 1–2. p. 450-454
P. Wanjara, M. Jahazi. 2008 « Characterization of electron beam welded 17-4 ph stainless steel ». Canadian Metallurgical Quarterly vol. 47 , nº 4. p. 413-436
N. Afrin, D. L. Chen, X. Cao, M. Jahazi. 2007 « Strain hardening behavior of a friction stir welded magnesium alloy ». Scripta Materialia vol. 57 , nº 11. p. 1004-1007
M. Fairman, N. Afrin, D. L. Chen, X. Cao, M. Jahazi. 2007 « Microstructural evaluation of friction stir processed AZ31B-H24 magnesium alloy ». Canadian Metallurgical Quarterly vol. 46 , nº 4. p. 425-432
Phuong Vo, M. Jahazi, S. Yue, Philippe Bocher. 2007 « Flow stress prediction during hot working of near-alpha titanium alloys ». Materials Science and Engineering: A vol. 447 , nº 1-2. p. 99-110
X. Wang, P. Vo, M. Jahazi, S. Yue. 2007 « Dwell fatigue microstructure in a near-α titanium alloy ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 38 , nº 4. p. 831-839
P. Wanjara, M. Brochu, M. Jahazi. 2007 « Electron beam freeforming of stainless steel using solid wire feed ». Materials and Design vol. 28 , nº 8. p. 2278-2286
X. Cao, M. Jahazi, J. P. Immarigeon, W. Wallace. 2006 « A review of laser welding techniques for magnesium alloys ». Journal of Materials Processing Technology vol. 171 , nº 2. p. 188-204
Michel Humbert, L. Germain, N. Gey, Philippe Bocher, M. Jahazi. 2006 « Study of the variant selection in sharp textured regions of bimodal IMI 834 billet ». Materials Science and Engineering: A vol. 430 , nº 1-2. p. 157-164
F. Jalilian, M. Jahazi, R. A. L. Drew. 2006 « Microstructural evolution during transient liquid phase bonding of Inconel 617 using Ni-Si-B filler metal ». Materials Science and Engineering: A vol. 423 , nº 1-2. p. 269-281
A. R. Khodabandeh, M. Jahazi, S. Yue, S. T. Aghdashi. 2006 « The determination of optimum forging conditions for the production of high strength-high impact toughness automotive parts ». Materials and Manufacturing Processes vol. 21 , nº 1. p. 105-110
X. Wang, M. Jahazi, S. Yue. 2006 « Substructure of high temperature compressed titanium alloy IMI 834 ». Materials Science and Engineering: A vol. 434 , nº 1-2. p. 188-193
P. Wanjara, M. Brochu, M. Jahazi. 2006 « Thin gauge titanium manufacturing using multiple-pass electron beam welding ». Materials and Manufacturing Processes vol. 21 , nº 5. p. 439-451
Priti Wanjara, M. Jahazi, H. Monajati, S. Yue. 2006 « Influence of thermomechanical processing on microstructural evolution in near- alloy IMI834 ». Materials Science and Engineering: A vol. 416 , nº 1-2. p. 300-311
Philippe Bocher, Mohammad Jahazi, Lionel Germain, Priti Wanjara, Nathalie Gey, Michel Humbert. 2005 « β Microtexture analysis in correlation with hcp textured regions observed in a forged near alpha titanium alloy ». Solid State Phenomena vol. 105. p. 127-132
X. Cao, M. Jahazi. 2005 « Estimation of resistance of filter media used for Prefil Footprinter tests of liquid aluminium alloys ». Materials Science and Technology vol. 21 , nº 10. p. 1192-1198
X. Cao, M. Jahazi. 2005 « Examination and verification of the filtration mechanism of cake mode during the pressure filtration tests of liquid Al–Si cast alloys ». Materials Science and Engineering: A vol. 408 , nº 1–2. p. 234-242
X. Cao, M. Xiao, M. Jahazi, J. P. Immarigeon. 2005 « Continuous wave ND:YAG laser welding of sand-cast ZE41A-T5 magnesium alloys ». Materials and Manufacturing Processes vol. 20 , nº 6. p. 987-1004
L. Germain, N. Gey, M. Humbert, A. Hazotte, P. Bocher, M. Jahazi. 2005 « An automated method to analyze separately the microtextures of primary αp grains and the secondary αs inherited colonies in bimodal titanium alloys ». Materials Characterization vol. 54 , nº 3. p. 216-222
Lionel Germain, Nathalie Gey, Ludovic Humbert, Philippe Bocher, Mohammad Jahazi. 2005 « Analysis of sharp microtexture heterogeneities in a bimodal IMI 834 billet ». Acta Materialia vol. 53 , nº 13. p. 3535-3543
Ali Reza Khodabandeh, Mohammad Jahazi, Steve Yue, Philippe Bocher. 2005 « Impact toughness and tensile properties improvement through microstructure control in hot forged Nb-V microalloyed steel ». ISIJ International vol. 45 , nº 2. p. 272-280
H. Monajati, A. K. Taheri, M. Jahazi, S. Yue. 2005 « Deformation characteristics of isothermally forged UDIMET 720 nickel-base superalloy ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 36 , nº 4. p. 895-905
H. Monajati, F. Zarandi, M. Jahazi, S. Yue. 2005 « Strain induced γ′ precipitation in nickel base superalloy Udimet 720 using a stress relaxation based technique ». Scripta Materialia vol. 52 , nº 8. p. 771-776
P. Wanjara, M. Brochu, S. Girard, M. Jahazi. 2005 « Electron beam freeforming on type 321 stainless steel using BNi-2 brazing paste ». Materials Science and Technology vol. 21 , nº 5. p. 613-618
P. Wanjara, M. Brochu, M. Jahazi. 2005 « Ti–6Al–4V electron beam weld qualification using laser scanning confocal microscopy ». Materials Characterization vol. 54 , nº 3. p. 254-262
P. Wanjara, M. Jahazi. 2005 « Linear friction welding of Ti-6Al-4V: Processing, microstructure, and mechanical-property inter-relationships ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 36 , nº 8. p. 2149-2164
P. Wanjara, M. Jahazi, H. Monajati, S. Yue, J. P. Immarigeon. 2005 « Hot working behavior of near-α alloy IMI834 ». Materials Science and Engineering: A vol. 396 , nº 1–2. p. 50-60
M. Jahazi, S. Hossein-Nejad. 2004 « The development of an optimum manufacturing and material selection process for the fabrication of labyrinth seal strips ». Journal of Materials Processing Technology vol. 152 , nº 3. p. 272-275
A. R. Mashreghi, H. Monajatizadeh, M. Jahazi, S. Yue. 2004 « High temperature deformation of nickel base superalloy Udimet 520 ». Materials Science and Technology vol. 20 , nº 2. p. 161-166
H. Monajati, M. Jahazi, R. Bahrami, S. Yue. 2004 « The influence of heat treatment conditions on gamma characteristics in Udimet 720 ». Materials Science and Engineering: A vol. 373 , nº 1-2. p. 286-293
M. Jahazi, J. J. Jonas. 2002 « The non-equilibrium segregation of boron on original and moving austenite grain boundaries ». Materials Science and Engineering: A vol. 335 , nº 1-2. p. 49-61
M. Jahazi, A. R. Mashreghi. 2002 « Dissolution and precipitation kinetics of γ' in nickel base superalloy Udimet 520 ». Materials Science and Technology vol. 18 , nº 4. p. 458-462
M. Jahazi, B. Eghbali. 2001 « The influence of hot forging conditions on the microstructure and mechanical properties of two microalloyed steels ». Journal of Materials Processing Technology vol. 113. p. 594-598
M. Jahazi, G. Ebrahimi. 2000 « Influence of flow-forming parameters and microstructure on the quality of a D6ac steel ». Journal of Materials Processing Technology vol. 103 , nº 3. p. 362-366
M. Jahazi, B. Egbali. 2000 « Influence of hot rolling parameters on the microstructure and mechanical properties of an ultra-high strength steel ». Journal of Materials Processing Technology vol. 103 , nº 2. p. 276-279
M. Jahazi, F. Jalilian. 1999 « The influence of thermochemical treatments on interface quality and properties of copper/carbon-fibre composites ». Composites Science and Technology vol. 59 , nº 13. p. 1969-1975
M. Jahazi. 1998 « The influence of thermomechanical treatment on the microstructure and mechanical properties of aisi 4130 steel ». Metals and Materials vol. 4 , nº 4. p. 818-822
M. Jahazi, M. Goudarzi. 1997 « The influence of thermomechanical parameters on the earing behaviour of 1050 and 1100 aluminium alloys ». Journal of Materials Processing Technology vol. 63. p. 610-613
M. Jahazi, M. Hosseinpour. 1995 « Fracture surface analysis of a welded ultra high strength steel ». The Metallurgist vol. 3. p. 10-17
I. A. Akmoulin, M. Djahazi, N. D. Buravova, J. J. Jonas. 1993 « Superplastic forging procedures for manufacture of ceramic yttria stabilised tetragonal zirconia products ». Materials Science and Technology vol. 9 , nº 1. p. 26-33
M. Djahazi, X. L. He, J. J. Jonas, W. P. Sun. 1992 « Influence of boron on nature and distribution of strain induced precipitates in (Ti,Nb) high strength low alloy steels ». Materials Science and Technology vol. 8 , nº 7. p. 628-636
M. Djahazi, X. L. He, J. J. Jonas, W. P. Sun. 1992 « Nb(C, N) Precipitation and Austenite Recrystallization in Boron-containing high-strength low-alloy steels ». Metallurgical Transactions A: Physical Metallurgy and Materials Science vol. 23 A , nº 8. p. 2111-2120
I. A. Akmoulin, M. Djahazi, J. J. Jonas. 1991 « Enhanced deformation behavior of incompletely sintered Y-TZP zirconia ». Scripta metallurgica et materialia vol. 25 , nº 5. p. 1035-1040
X. L. He, M. Djahazi, J. J. Jonas, J. Jackman. 1991 « The non-equilibrium segregation of boron during the recrystallization of Nb-treated HSLA steels ». Acta Metallurgica et Materialia vol. 39 , nº 10. p. 2295-2308

Adriana Eres-Castellanos, Javier Hidalgo, Muftah Zorgani, Mohammad Jahazi, Isaac Toda-Caraballo, Francisca G. Caballero, Mateo Garcia. 2019 « On the control of the scale of nanobainitic microstructures by prior austenite strengthening ». Communication lors de la conférence : European Congress and Exhibition on Advanced Materials and Processes (EUROMAT) (Stockholm, Sweden, Sept. 01-05, 2019)
Oluwole A. Olufayo, Oussama Chaieb, Victor Songmene, Mohammad Jahazi. 2019 « Machining studies on high silicon content Al-Si alloys for the aerospace industry ». Communication lors de la conférence : The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019)
Yassine Bouissa, Henri Champliaud, Mohammad Jahazi, Louis-Philippe Lapierre-Boire, Jean-Benoît Morin, Nicolas Poulain. 2017 « Modeling heterogeneities effects on phase transformation during quenching of large size forged steel ingots ». Communication lors de la conférence : 14th U.S. National Congress on Computational Mechanics (USNCCM) (Montreal, QC, Canada, July 17-20, 2017)
D. Shahriari, A. Loucif, N. Harris, Y. Bouissa, M. Jahazi, L. P. Lapierre-Boire, N. Poulain. 2016 « Comprehensive simulation of solidification, forging and heat treatment process of large size high strength steel ingots ». Communication lors de la conférence : The 31st Forging Industry Technical Conference (Colombus, OH, USA, Sept. 19-20, 2016)
Mariem Zoghlami, Hossein Monajati, Mohammad Jahazi, Victor Songmene. 2016 « Microstructural analysis of banded structure in friction stir welding of AA6082 aluminum alloy ». Communication lors de la conférence : 34th International Conference and Exhibition of ICSOBA (the International Committee for Study of Bauxite, Alumina & Aluminium) (Québec, QC, Canada, Oct. 03-06, 2016)
L. Sarrat, A. Chamanfar, Mohammad Jahazi. 2012 « Microstructure evolution of Ni base superalloys during thermomechanical processing ». Communication lors de la conférence : Research and Innovation for Transport Systems of the Future (Paris, France, Nov. 12-15, 2012)

Gamaliel Salazar, Jean-Sébastien Lemyre-Baron, Mohammad Jahazi, Henri Champliaud, Antoine Tahan. 2023 « Analysis of industrial quenching (air transfer + oil immersion) and the cooling regimes after immersion ». Heat Treat 2023: Proceedings of the 32nd ASM Heat Treating Society Conference (Detroit, MI, USA, Oct. 17-19, 2023) ASM International
Zhang Chunping, Abdelhalim Loucif, Mohammad Jahazi, Jean Benoit Morin. 2022 « FEM simulation of the effect of mold initial temperature on carbon macrosegregation in large-size steel ingots ». 10th International Conference on Material Science and Engineering Technology (ICMSET 2021)), the 5th International Conference on Building Materials and Materials Engineering (ICBMM 2021), and the 6th International Conference on Materials Technology and Ap (Kyoto, Japan - En ligne, Oct. 14-17, 2021) Trans Tech Publications
L. Ebacher, M. Jahazi, J. B. Morin, B. Ritchey. 2022 « Thermomechanical study of H13 hot forged bars ». 4th International Ingot Casting Rolling Forging, ICRF 2022 - Conference Proceedings (Pittsburgh, PA, USA, June 21-23, 2022) Association for Iron and Steel Technology, AISTECH
Neda Ghodrati, Abdelhalim Loucif, Jean -Benoit Morin, Mohammad Jahazi. 2022 « Modeling of the influence of hot top design on microporosity and shrinkage cavity in large-size cast steel ingots ». 8th International Congress on the Science and Technology of Steelmaking (Montreal, QC, Canada, Aug. 02-04, 2022) Association for Iron & Steel Technology
Kianoosh Kaveh, Jean-Benoit Morin, Mohammad Jahazi, Elmira Moosavi-Khoonsari. 2022 « Post-mortem study of magnesia-carbon refractory bricks exposed to thermal radiation in electric arc furnace steelmaking ». 8th International Congress on the Science and Technology of Steelmaking (ICS) (Montreal, QC, Canada, Aug. 02-04, 2022) Association for Iron & Steel Technology
Abdelhalim Loucif, Zhang Chunping, Jean-Benoît Morin, Mohammad Jahazi. 2022 « A FEM analysis on the influence of manganese on carbon and chromium macrosegregation in large size steel ingot ». 10th International Conference on Material Science and Engineering Technology (ICMSET 2021)), the 5th International Conference on Building Materials and Materials Engineering (ICBMM 2021), and the 6th International Conference on Materials Technology and Ap Trans Tech Publications
Mohammad Maroufkhani, Alireza Khodabandeh, Iulian Radu, Mohammad Jahazi. 2022 « Pitting corrosion resistance of the 316L stainless steel welds: influenced of oxygen content in the protective gas ». Canadian Society for Mechanical Engineering International Congress (Alberta, AB, Canada, 7-8 juin 2022) Canadian Society for Mechanical Engineering (CSME)
Mahshad Javidikia, Morteza Sadeghifar, Victor Songmene, Mohammad Jahazi. 2021 « Analysis and optimization of surface roughness in turning of AA6061-T6 under various environments and parameters ». 9th CIRP Conference on High Performance Cutting (En ligne, May 24-26, 2021) Elsevier
Abdelhalim Loucif, Jean Benoit Morin, Louis Philippe Lapierre-Boire, Mohammad Jahazi. 2021 « Subsurface crack initiation and propagation in an open dieforged high strength steel: A microstructural analysis ». 9th International Conference on Engineering and Innovative Materials (ICEIM 2020) (Singapor, Singapor, Sept. 4-6, 2020) Trans Tech Publications Ltd
Abdelhalim Loucif, Chunping Zhang, Mohammad Jahazi, Louis-Philippe Lapierre-Boire. 2020 « Macrosegregation characteristics of ferrite and austenite stabilizer elements in large size high strength steel ingot ». 8th International Conference on Engineering and Innovative Materials (ICEIM 2019) (Tokyo, Japan, Sept. 06-08, 2019) Trans Tech Publications Ltd
Pierre Belanger, Mohammad Jahazi. 2019 « Friction stir welded lap joint inspection using ultrasonic guided waves ». 45th Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 38 (Burlington, VT, USA, July 15-19, 2018) AIP Publishing
K. Chadha, M. Jahazi, John G. Spray. 2019 « Effect of strain rate on the columnar to equiaxed transition in an as-cast medium-carbon low-alloy steel during hot deformation ». Materials Science and Technology (MS&T19) (Portland, OR, USA, Sept. 29-Oct. 3, 2019) Materials Science and Technology
Frederic Dupont-Marillia, Mohammad Jahazi, Pierre Belanger. 2019 « Live imaging using TFM in a 30-inch forged steel block ». ASNT Annual Conference 2019 (Las Vegas, NV, USA, Nov. 18-21, 2019) ASNT
Eslam Fayed, Mamoun Medraj, Davood Shahriari, Mohammad Jahazi, Vladimir Brailovski. 2019 « Effect of heat treatment holding time on the microstructure and mechanical properties of Inconel 718 superalloy fabricated by selective laser melting ». Proceedings of The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019) Western University - Department of Mechanical and Materials Engineering
Chunping Zhang, Abdelhalim Loucif, Rami Tremblay, Mohammad Jahazi. 2019 « Influence of non-uniform temperature distribution of the mold on solidification behavior in large-size steel ingots ». Proceedings of the 8th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking (STEELSIM 2019) (Toronto, ON, Canada, Aug. 13-15, 2019) Association for Iron & Steel Technology
Nima Bohlooli Arkhazloo, Farzad Bazdidi-Tehrani, Morin Jean-Benoit, Mohammad Jahazi. 2018 « A numerical thermal analysis of the heating process of large size forged ingots ». THERMEC 2018 : 10th International Conference on Processing and Manufacturing of Advanced Materials (Paris, France, July 9-13, 2018) Trans Tech Publications
Samuel Bertrand, Davood Shahriari, Mohammad Jahazi, Henri Champliaud. 2018 « Linear friction welding process simulation of Ti-6Al-4V alloy: a heat transfer analysis of the conditioning phase ». 17th International Conference on Metal Forming (Metal Forming) (Toyohashi, Japan, Sept. 16-19, 2018) Elsevier B.V.
Gary Brionne, Abdelhalim Loucif, Chunping Zhang, Louis-Philippe Lapierre-Boire, Mohammad Jahazi. 2018 « 3D FEM simulation of the effect of cooling rate on SDAS and macrosegregation of a high strength steel ». 10th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Paris, France, July 09-13, 2018) Trans Tech Publications Ltd
Frederic Dupont-Marillia, Mohammad Jahazi, Pierre Bélanger. 2018 « Phased array inspection of large size forged steel parts ». 44th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2017) (Provo, UT, USA, July 16-21, 2017) American Institute of Physics
Abdelhalim Loucif, Davood Shahriari, Kanwal Chadha, Chunping Zhang, Mohammad Jahazi, Rami Tremblay, Louis-Philippe Lapierre-Boire. 2018 « Cracking and failure in a high strength low alloy steel during solidification ». 10th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Paris, France, July 09-13, 2018) Trans Tech Publications Ltd
Abdelhalim Loucif, Heithem Touazine, Mohammad Jahazi. 2018 « Prediction of steel transformation temperatures using thermodynamic modeling and design of experiments (DOE) ». 10th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Paris, France, July 09-13, 2018) Trans Tech Publications Ltd
Omid Majidi, Mohammad Jahazi, Nicolas Bombardier. 2018 « Characterization of mechanical properties and formability of a superplastic Al-Mg alloy ». NUMISHEET 2018: 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (Tokyo, Japan, July 30-Aug. 6, 2018) IOP Publishing
Seyyed Hesamodin Talebi, Hadi Ghasemi-Nanesa, Mohammad Jahazi, Haikouhi Melkonyan. 2018 « Influence of starting microstructure on dilatation behavior during tempering of a high strength steel ». THERMEC 2018 : 10th International Conference on Processing and Manufacturing of Advanced Materials (Paris, France, July 9-13, 2018) Trans Tech Publications
Kanwal Chadha, Davood Shahriari, Mohammad Jahazi. 2017 « An approach to develop hansel-spittel constitutive equation during ingot breakdown operation of low alloy steels ». Frontiers in Materials Processing, Applications, Research and Technology : Select Proceedings of FiMPART 2015 (Hyderabad, India, June 12-15, 2015) Springer
Frederic Dupont-Marillia, Mohammad Jahazi, Serge Lafreniere, Pierre Bélanger. 2017 « Influence of local mechanical properties of high strength steel from large size forged ingot on ultrasonic wave velocities ». 43rd Annual Review of Progress in Quantitative Nondestructive Evaluation (Atlanta, GA, USA, July 17-22, 2016) American Institute of Physics
Emna Ben Fredj, Hadi Ghasemi Nanesa, Davood Shahriari, Jean-Benoit Morin, Mohammad Jahazi. 2017 « Effect of cooling rate on phase transformation and microstructure evolution in a large size forged ingot of medium carbon low alloy steel ». TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings (San Diego, CA, USA, Feb. 26-March 2, 2017) Springer International Publishing
Hadi Ghasemi-Nanesa, Mohammad Jahazi, Majid Heidari, Tom Levasseur. 2017 « The influence of deformation-induced microvoids on mechanical failure of AISI A8-Mod martensitic tool steel ». 20th International ESAFORM Conference on Material Forming (ESAFORM) (Dublin, Ireland, Apr. 26-28, 2017) American Institute of Physics
A. Loucif, M. Bitterlin, M. Jahazi, R. Tremblay, J. B. Morin, L. P. Lapierre-Boire. 2017 « Crack analysis in as cast large size ingot of a high strength steel ». 14th International Conference on Fracture (ICF 2017) (Rhodes, Greece, June 18-20, 2017) International Conference on Fracture
A. Loucif, D. Shahriari, K. Chadha, M. Jahazi, R. Tremblay, L. P. Lapierre-Boire. 2017 « Analysis of cracks and failure during solidification of a high strength low alloy steel ». 14th International Conference on Fracture (ICF 2017) (Rhodes, Greece, June 18-20, 2017) International Conference on Fracture
Abdelhalim Loucif, Davood Shahriari, Chunping P. Zhang, Mohammad Jahazi, Louis-Philippe Lapierre-Boire, Rami Tremblay. 2017 « Macrosegregation of alloying elements in hot top of large size high strength steel ingot ». International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Graz, Austria, May 29-June 03, 2016) Trans Tech Publications
Omid Majidi, Mohammad Jahazi, Nicolas Bombardier, Ehab Samuel. 2017 « Variation of strain rate sensitivity index of a superplastic aluminum alloy in different testing methods ». 20th International ESAFORM Conference on Material Forming (ESAFORM) (Dublin, Ireland, Apr. 26-28, 2017) American Institute of Physics
Chunping P. Zhang, Davood Shahriari, Abdelhalim Loucif, Mohammad Jahazi, Louis-Philippe Lapierre-Boire, Rami Tremblay. 2017 « Effect of segregated alloying elements on the high strength steel properties: Application to the large size ingot casting simulation ». TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings (San Diego, CA, USA, Feb. 26-Mar. 02, 2017) Springer International Publishing
Chunping Zhang, Davood Shahriari, Abdelhalim Loucif, Mohammad Jahazi, Louis-Philippe Lapierre-Boire, Rami Tremblay. 2017 « Effect of thermo-physical properties on solidification behavior of large size high strength steel ingots ». 7th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (SteelSim) (Qingdao, China, Aug. 16-17, 2017) The Chinese Society for Metals
Ali Aidibe, Mojtaba Kamali Nejad, Antoine Tahan, Mohammad Jahazi, Sylvain G. Cloutier. 2016 « A proposition for new quality 3D indexes to measure surface roughness ». 7th HPC 2016 - CIRP Conference on High Performance Cutting (Chemnitz, Germany, May 31-June 2, 2016) Elsevier
Kanwal Chadha, Davood Shahriari, Mohammad Jahazi. 2016 « Modeling metadynamic recrystallization of a die steel during ingot breakdown process ». NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes (Troyes, France, July 04-07, 2016) EDP Sciences
Nathan Harris, Davood Shahriari, Mohammad Jahazi. 2016 « Analysis of void closure during open die forging process of large size steel ingots ». 16th Metal Forming International Conference (Krakow, Poland, Sept. 18-21, 2016)
Mahdi Masoumi, Yasser Zedan, Damien Texier, Mohammad Jahazi, Philippe Bocher. 2016 « Friction stir welding of AA2024 and AA2198 Aluminum alloys: effect of tool geometry and process parameters ». 2nd International Conference on Welding and Non Destructive Testing (ICWNDT) (Tehran, Iran, Dec. 20-21, 2016)
Mahdi Masoumi, Yasser Zedan, Damien Texier, Mohammad Jahazi, Philippe Bocher. 2016 « The influence of tool geometry on mechanical properties of friction stir welded AA-2024 and AA-2198 joints ». 34th International Conference and Exhibition of ICSOBA (Quebec, QC, Canada, Oct. 03-06, 2016) The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA)
A. Tongne, H. Robe, C. Desrayaud, M. Jahazi, E. Feulvarch. 2016 « Two dimensional Coupled Eulerian Lagrangian (CEL) model for banded structure prediction in friction stir welding with trigonal tool ». ESAFORM 2016: 19th International ESAFORM Conference on Material Forming (Nantes, France, Apr. 27-29, 2016) American Institute of Physics
Mariem Zoghlami, Mohammad Jahazi, Victor Songmene. 2016 « The effects of friction stir welding parameters on the characteristics of banded structure for aluminum alloys ». 13th International Aluminium Conference (INALCO) (Naples, Italy, Sept. 21-23, 2016) Trans Tech Publications Ltd
Clodualdo Aranas, Rupanjit Grewal, Kanwal Chadha, Davood Shahriari, Mohammad Jahazi, John J. Jonas. 2015 « Formation of widmanstätten ferrite in a C-Mn steel at temperatures high in the austenite phase field ». International Conference on Solid-Solid Phase Transformations in Inorganic Materials 201 (PTM 2015) (Whistler, BC, Canada, June 28, 2015 - July 3, 2015) International Conference on Solid-Solid Phase Transformations in Inorganic Materials
K. Chadha, D. Shahriari, M. Jahazi. 2015 « Constitutive modelling of ingot breakdown process of low alloy steels ». 6th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (SteelSim 2015) (Bardolino, Italy, Sept. 23-25, 2015) Associazione Italiana di Metallurgia
Kanwal Chadha, Pinaki Prasad Bhattacharjee, Mohammad Jahazi. 2015 « The effect of strain reversal during high pressure torsion on the microstructure evolution and texture of aluminum alloys ». Characterization of Minerals, Metals, and Materials 2015 - TMS 2015 144th Annual Meeting and Exhibition, March 15, 2015 - March 19, 2015 (Orlando, FL, USA, March 15-19, 2015) Minerals, Metals and Materials Society
Kanwal Chadha, Mohammad Jahazi, Abdelhalim Loucif, Davood Shahriari. 2015 « Effect of deformation temperature and interpass time on microstructure evolution and mechanical properties of medium carbon low alloy steel during ingot breakdown process ». 2015 TMS Annual Meeting & Exhibition : Phase Transformations and Microstructural Evolution (Orlando, FL, Canada, Mar. 15-19, 2015)
Samir Mourad Chentouf, T. Belhadj, N. Bombardier, M. Jahazi. 2015 « Influence of reduction rate on the characteristics of cavities in superplastically formed 5083 aluminum alloy ». 54th annual conference of metallurgists (COM 2015) (Toronto, ON, Canada, Aug. 23-26, 2015)
Abdelhalim Loucif, Emna Ben Fredj, Mohammad Jahazi, Louis-Philippe Lapierreboire, Rami Tremblay, Raymond Beauvais. 2015 « Analysis of macrosegregation in large size forged ingot of high strength steel ». Proceedings of the 6th International Congress on the Science and Technology of Steelmaking (ICS 2015) (Beijing, China, May 12-14, 2015) Chinese Society for Metals
Hadi Ghasemi Nanesa, Mohammad Jahazi, Tom Levasseur. 2015 « On the martensitic transformation of AISI D2 tool steel through cryogenic cooling ». International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 (PTM 2015) (Whistler, BC, Canada, June 28-July 3, 2015) International Conference on Solid-Solid Phase Transformations in Inorganic Materials
Hadi Ghasemi Nanesa, Mohammad Jahazi, Tom Levasseur. 2015 « Transmission electron microscopy study of micro-structure evolution in cryotreated AISI D2 tool steel ». International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 (PTM 2015) (Whistler, BC, Canada, June 28-July 3, 2015) International Conference on Solid-Solid Phase Transformations in Inorganic Materials
D. Shahriari, Abdelhalim Loucif, Mohammad Jahazi, R. Tremblay, R. Beauvais. 2015 « 3D numerical simulation of solidification of large size ingots of high strength steels ». 6th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (STEELSIM2015) (Bardolino, Italy, Sept. 23-25, 2015)
Amèvi Tongne, Christophe Desrayaud, Mohammad Jahazi, Eric Feulvarch. 2015 « Analytical modeling of material flow in friction stir welding ». 11th International Seminar on Numerical Analysis of Weldability (Graz, Austria, Sept. 27-30, 2015)
Samir Mourad Chentouf, Mohammad Jahazi, Rejean Fortin. 2014 « Influence of the quench process on microstructure evolution in a landing gear steel ». ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014) American Society of Mechanical Engineers (ASME)
Hadi Ghasemi-Nanesa, Mohammad Jahazi, Gil Trigo, Tom Levasseur. 2014 « Influence of cryogenic treatment on microstructure characteristics and mechanical properties of AISI D2 tool steel ». TMS 2014 Supplemental Proceedings John Wiley & Sons, Inc.
Fatemeh Masoumi, Mohammad Jahazi, J. Cormier, D. Shahriari. 2014 « Dissolution kinetics and morphological changes of γ′ in AD730TM superalloy ». 2nd European Symposium on Superalloys and Their Applications, EUROSUPERALLOYS 2014 (Giens, France, May 12-16, 2014)
A. Rosenbaum, A. Chamanfar, Mohammad Jahazi, A. Bonakdar. 2014 « Microstructure analysis of broached inconel-718 gas turbine disc fir-trees ». Proceedings of the ASME Turbo Expo (Dusseldorf, Germany, June 16-20, 2014) American Society of Mechanical Engineers (ASME)
H. Touazine, Mohammad Jahazi, Philippe Bocher. 2014 « Influence of hard turning on microstructure evolution in the subsurface layers of Inconel 718 ». ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014) American Society of Mechanical Engineers (ASME)
Mahyar Asadi, Dominic Guillot, Arnaud Weck, Ashok K. Koul, Ahmad Chamanfar, Mohammad Jahazi. 2013 « Constructing a validated deformation mechanism map using low temperature creep strain accommodation processes for waspaloy (A nickel-based superalloy) ». American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Paris, France, July 14-18, 2013) American Society of Mechanical Engineers
M. Bensalah, A. Chamanfar, S. Chentouf, M. Jahazi. 2013 « The influence of thermomechanical processing on prior austenite grain size in medium carbon low alloy steels ». Materials Science & Technology Conference and Exhibition 2013 (MS&T'13) (Montreal, QC, Canada, Oct. 27-31, 2013) Curran
D. Shahriari, A. Zolfaghari, Mohammad Jahazi, Philippe Bocher. 2013 « Development of an expert system to characterize weld defects identified by ultrasonic testing ». American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Paris, France, July 14-18, 2013) American Society of Mechanical Engineers
Melissa Anderson, Philippe Bocher, Javad Gholipour, Mohammad Jahazi, Jean Savoie, Priti Wanjara. 2012 « Increasing the hydroformability of stainless steel 321 by multistep processing ». Proceedings of the 14th International Conference on Metal Forming, METAL FORMING 2012 (Krakow, Poland, Sept. 16-19, 2012) Wiley-VCH Verlag
Davood Shahriari, Iman Heidari, Kitae Kim, Mohammad Jahazi. 2012 « Welding temperature distribution in low carbon steel sheets by FDM and FEM ». Proceedings of the 14th International Conference on Metal Forming, METAL FORMING 2012 (Krakow, Poland, Sept. 16-19, 2012) Wiley-VCH Verlag
S. Zamani, H. Razavizadeh, Mohammad Jahazi. 2012 « Microstructure and hardness control of a binary -TiAl alloy by heat treatment ». 2nd International Advances in Applied Physics and Material Science (Antalya, Turkey, Apr. 26-29, 2012) Applied Physics and Material Science (APMAS)
S. Zamani, H. Razavizadeh, Mohammad Jahazi. 2012 « The influence of heat-treatment cycles on pressure strength of a binary-TiAl alloy ». 2nd International Advances in Applied Physics and Material Science (Antalya, Turkey, Apr. 26-29, 2012) Applied Physics and Material Science (APMAS)
Xinjin Cao, Guillaume Debaecker, Mohammad Jahazi, Surendar Marya, Jonathan Cuddy, Anand Birur. 2010 « Effect of post-weld heat treatment on Nd: YAG laser welded Ti-6Al-4V alloy quality ». THERMEC 2009 Trans Tech Publications Ltd
Xinjin Cao, Mohammad Jahazi. 2010 « Friction stir welding of dissimilar AA 2024-T3 to AZ31B-H24 alloys ». THERMEC 2009 Supplement (Berlin, Germany, ) Trans Tech Publications Ltd
E. Dalgaard, F. Coghe, L. Rabet, M. Jahazi, P. Wanjara, J. J. Jonas. 2010 « Texture evolution in linear friction welded Ti-6Al-4V ». THERMEC 2009 Supplement (Berlin, Germany, Aug. 25-29, 2009) Trans Tech Publications
L. Dubourg, P. Doran, S. Larose, M. A. Gharghouri, M. Jahazi. 2010 « Prediction and measurements of thermal residual stresses in AA2024-T3 friction stir welds as a function of welding parameters ». THERMEC 2009 Supplement (Berlin, Germany, Aug. 25-29, 2009) Trans Tech Publications Ltd
S. Larose, L. Dubourg, C. Perron, M. Jahazi, P. Wanjara. 2010 « Limitation of distortion in friction stir welded (FSW) panels using needle peening ». THERMEC 2009 (Berlin, Germany, Aug. 25-29, 2009) Trans Tech Publications Ltd
P. Vo, M. Jahazi, S. Yue. 2010 « FEM modelling of recrystallization behaviour for near-alpha Ti alloy IMI834 ». THERMEC 2009 Supplement (Berlin, Germany, Aug. 25-29, 2009) Trans Tech Publications
X. Cao, M. Jahazi. 2009 « Effect of welding speed on lap joint quality of AZ31 magnesium alloy ». Trends in Welding Research 2008: Proceedings of the 8th International Conference (Pine Mountain, GA, USA, June 1-6, 2008) ASM International
A. Chamanfar, M. Jahazi, S. Yue, J. Gholipour, P. Wanjara. 2009 « Linear friction welding behavior of Waspaloy ». Materials Science and Technology Conference and Exhibition 2009, MS and T'09 (Pittsburgh, PA, USA, Oct. 25-29, 2009) Association for Iron and Steel Technology
E. Dalgaard, Mohammad Jahazi, Ali Merati, P. Wanjara. 2009 « Mechanical properties of linear friction welded Ti-6-4V alloy ». XIX International Symposium on Air Breathing Engines 2009 : (ISABE 2009) : Montreal, Canada, 7-11 September 2009 (Montreal, QC, Canada, Sept. 7-11, 2009) American Institute of Aeronautics and Astronautics
L. Dubourg, J. Gholipour, M. Jahazi. 2009 « Friction stir welding of 2024-T3 aluminum tubes for hydroforming application ». Trends in Welding Research 2008: Proceedings of the 8th International Conference (Pine Mountain, GA, USA, June 1-6, 2008) ASM International
A. Merati, J. Deronja, L. Dubourg, M. Jahazi. 2009 « Friction stir processing technology for the repair of nickel-aluminum bronze ». Canadian Aeronautics and Space Institute Conference (AERO 2009) (Kanata, ON, Canada, May 5-7, 2009)
A. Merati, L. Dubourg, M. Jahazi. 2009 « Application of FSW technology for additive repair of damaged components ». RTO-MP-AVT-163 Specialists' Meeting on Additive Technology for Repair of Military Hardware (Bonn, Germany, Oct. 19-22, 2009) NATO Science and Technology Organization
X. Cao, M. Guo, M. Jahazi. 2008 « Continuous wave ND:YAG laser welding of Ti-6A1-4V titanium alloy ». 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) Canadian Institute of Mining Metallurgy & Petroleum
X. Cao, M. Jahazi, N. Afrin, D. L. Chen. 2008 « Fatigue properties of friction stir welded AZ31B magnesium alloy ». 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) Canadian Institute of Mining Metallurgy & Petroleum
X. Cao, B. Rivaux, M. C. Jahazi, J. Cuddy, A. Birur. 2008 « Effect of joint gap on Inconel 718 alloy quality welded using 4 kW continuous wave ND:YAG laser ». 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) Canadian Institute of Mining Metallurgy & Petroleum
L. Dubourg, R. Amargier, M. Jahazi. 2008 « Relationship between FSW parameters, hardness and tensile properties of 7075-T6 and 2098-T851 similar but welds ». 7th International Symposium on Friction Stir Welding : 20-22 May 2008, Japan (Awaji Island, Japan, May 20-22, 2008) TWI Ltd
L. Dubourg, A. Merati, M. Gallant, M. Jahazi. 2008 « Manufacturing of aircraft panels by friction stir lap welding of 7075-T6 stringers on 2024-T3 skin: process optimization and mechanical properties ». 7th International Symposium on Friction Stir Welding : 20-22 May 2008, Japan (Awaji Island, Japan, May 20-22, 2008) TWI Ltd
F. Gemme, Y. Verreman, L. Dubourg, M. Jahazi. 2008 « Friction stir welding of 7075 aluminium alloy : finite element modelling of the dwell phase ». 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) Canadian Institute of Mining Metallurgy & Petroleum
J. Gholipour, M. Jahazi. 2008 « Evaluation of lubricants in hydroforming of aerospace materials ». Plasticity 2008 (Kailua-Kona, HI, USA, Jan. 2-5, 2008)
D. Lévesque, L. Dubourg, M. Lord, M. Jahazi, A. Blouin. 2008 « Residual stress measurement in friction stir welds using laser ultrasonics ». Review of Progress in Quantitative Nondestructive Evaluation: Proceedings of the 35th Annual Review of Progress in Quantitative Nondestructive Evaluation (Chicago, IL, USA, July 22-25, 2008) AIP Publishing
D. Lévesque, L. Dubourg, C. Mandache, P. Gougeon, X. Cao, M. C. Jahazi. 2008 « Assessment of friction stir welds with nondestructive methods ». 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) Canadian Institute of Mining Metallurgy & Petroleum
P. Wanjara, M. Jahazi. 2008 « Assessing mechanical property gradients associated with microstructural changes in stainless steel weldments by shear punch testing ». International Symposium on Recent Developments in Advanced High Strength Steels Processing 2008 : Held at the 47th Conference of Metallurgists (COM) 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) Canadian Institute of Mining Metallurgy & Petroleum
P. Wanjara, E. Poirier, M. C. Jahazi. 2008 « Manufacture of a strut on a captive trajectory system by electron beam welding ». 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) Canadian Institute of Mining Metallurgy & Petroleum
N. Afrin, D. L. Chen, X. Cao, M. Jahazi. 2007 « Influence of friction stir welding on the tensile behaviour of AZ31B magnesium alloy ». Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007) Canadian Institute of Mining, Metallurgy and Petroleum
N. Boutana, Philippe Bocher, M. Jahazi, D. Piot, F. Motheillet. 2007 « Microstructural modeling of cold creep/fatigue in near alpha titanium alloys using cellular automata method ». Proceedings of TI-2007, 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007) Minerals, Metals and Materials Society
X. Cao, M. Jahazi. 2007 « Applications of laser welding and friction stir welding technologies for joining aerospace magnesium alloys ». LMT 2007 : proceedings of the Third International Conference on Light Metals Technology : September 24-26, 2007, Saint-Sauveur, Québec, Canada (Saint-Sauveur, QC, Canada, Sept. 24-26, 2007) National Research Council Canada = Conseil national de recherches Canada
X. Cao, M. Jahazi. 2007 « Friction stir processing of sand-cast aerospace magnesium alloy Ze41A-T5 ». Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007) Canadian Institute of Mining, Metallurgy and Petroleum
X. Cao, M. Jahazi, M. Guerin, R. S. Mishra. 2007 « Friction stir welding of an aerospace magnesium alloy ». Friction Stir Welding and Processing IV (Orlando, FL, USA, Feb. 25-Mar. 1, 2007) The Minerals, Metals & Materials Society
Xinjin Cao, Mohammad Jahazi. 2007 « New analyses of pressure filtration curves of Al alloys: a case study ». THERMEC 2006 Supplement - 5th International Conference on Processing and Manufacturing of Advanced Materials (Vancouver, BC, Canada, July 4-8, 2006) Trans Tech Publications Ltd
E. Coman, L. Dubourg, M. Jahazi, K. Ghosh. 2007 « A study of the deformation and residual stresses in an aircraft fuselage panel joined by friction stir welding ». Proceedings of the 23rd ISPE Internaional Conference on CAD/CAM Robotics and Factories of the Future -CARS & FOF'07 (Bogota, Colombia, Aug. 16-18, 2007) Universidad Militar Nueva Granada
M. Fairman, N. Afrin, D. L. Chen, X. Cao, M. Jahazi. 2007 « Microstructural and microhardness evolution of friction stir processing AZ31B-H24 magnesium alloy ». Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007) Canadian Institute of Mining, Metallurgy and Petroleum
Lionel Germain, Phuong Vo, Nathalie Gey, Mohammad Jahazi, Michel Humbert, Philippe Bocher. 2007 « Development of sharp local α microtextures during α/β thermo-mechanical processing of TIMETAL 834 ». 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007) Minerals, Metals and Materials Society
D. Levesque, L. Dubourg, C. Mandache, S. E. Kruger, M. Lord, A. Merati, M. Jahazi, J-P. Monchalin. 2007 « Synthetic aperture focusing technique for the ultrasonic evaluation of friction stir welds ». Review of Progresses in Quantitative Nondestructive Evaluation : 34th Annual Review of Progress in Quantitative Nondestructive Evaluation (Golden, CO, USA, July 22-27, 2007) AIP Publishing
A. Liu, D. L. Chen, S. Bhole, X. Cao, M. Jahazi. 2007 « Corrosion behavior of the stir zone in friction stir welded dissimilar joint of 2024 aluminium to AZ31 magnesium alloys ». Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007) Canadian Institute of Mining, Metallurgy and Petroleum
C. Mandache, A. Merati, L. Dubourg, M. Jahazi. 2007 « Pulsed Eddy Current Inspection of friction stir welded components ». ASNT fall conference and quality testing show 2007 (Las Vegas, NV, USA, Nov. 12-16, 2007) ASNT
C. Mary, M. Jahazi. 2007 « Linear friction welding of IN-718 process optimization and microstructure evolution ». THERMEC 2006 Supplement - 5th International Conference on Processing and Manufacturing of Advanced Materials (Vancouver, BC, Canada, July 4-8, 2006) Trans Tech Publications
E. Uta, M. Humbert, N. Gey, A. Hazotte, Philippe Bocher, M. Jahazi. 2007 « Description and characterisation of texture heterogeneitites in titanium alloy Timetal 834 with a bimodal microstructure ». 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007) Minerals, Metals and Materials Society
P. Vo, M. Jahazi, S. Yue. 2007 « Recrystallization during Alpha + Beta Processing of IMI834 ». Proceedings of TI-2007, 11th World Conference on Titanium (Kyoto, Japan, June 1-5, 2007) Minerals, Metals and Materials Society
P. Vo, M. Jahazi, S. Yue. 2007 « Recrystallization during beta working of IMI834 ». THERMEC 2006 Supplement - 5th International Conference on Processing and Manufacturing of Advanced Materials (Vancouver, BC, Canada, July 4-8, 2006) Trans Tech Publications
P. Wanjara, M. Brochu, M. Jahazi. 2007 « Electron beam freeform fabrication on stainless steel ». THERMEC 2006 (Vancouver, B.C, Canada, July 4-8, 2006) Trans Tech Publications
M. Xiao, C. Poon, P. Wanjara, M. Jahazi, Z. Fawaz, P. Krimbalis. 2007 « Optimization of Nd-YAG laser welding process for Inconel 718 alloy ». Progress in Light Metals, Aerospace Materials and Superconductors (Beijing, China, June 25-30, 2006) Trans Tech Publications
Cao Xinjin, Xiao Min, M. Jahazi, T. Shariff. 2007 « Evolution of microstructures during laser surface cladding of magnesium alloy castings using welding wire ». THERMEC 2006 - Proceedings of the 5th International Conference on Processing and Manufacturing of Advanced Materials Trans Tech Publications
H. Al-Kazzaz, M. Medraj, X. Cao, M. Xiao, M. Jahazi. 2006 « Effect of laser power and joint gap on weld quality of aerospace grade ZE41A-T5 magnesium alloy using Nd:YAG laser ». Magnesium technology in the global age : proceedings of the International Symposium on Magnesium Technology in the Global Age, October 1-4, 2006, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 1-4, 2006) Canadian Institute of Mining, Metallurgy and Petroleum
Nabil Boutana, Philippe Bocher, Mohammad Jahazi, D. Piot, F. Montheillet. 2006 « Utilisation des automates cellulaires pour étudier le comportement en fatigue-fluage des alliages de titane ». Matériaux 2006 (Dijon, France, 13-17 nov. 2006)
X. Cao, M. Jahazi, R. Mehta. 2006 « Friction stir welding of AZ31B-H24 magnesium alloy butt joints ». 6th International Friction Stir Welding Symposium 2006 (Saint-Sauveur, QC, Canada, Oct. 10-13, 2006) TWI Ltd
X. Cao, M. Xiao, M. Jahazi. 2006 « Effect of processing parameters on laser cladding of magnesium alloy castings ». Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006) Canadian Institute of Mining, Metallurgy and Petroleum
X. Cao, M. Xiao, M. Jahazi, T. Shariff. 2006 « Surface cladding of magnesium alloy castings using Nd:YAG laser ». Magnesium technology 2006 : proceedings of the symposium held during the TMS 2006 annual meeting in San Antonio, Texas, USA, March 12-16, 2006 (San Antonio, TX, USA, Mar. 12-16, 2006) The Minerals, Metals & Materials Society
L. Dubourg, F. O. Gagnon, F. Nadeau, L. St-Georges, M. Jahazi. 2006 « Process window optimization for FSW of thin and thick sheet Al alloys using statistical methods ». 6th International Friction Stir Welding Symposium 2006 (Saint-Sauveur, QC, Canada, Oct. 10-13, 2006) TWI
L. Dubourg, M. Jahazi, G. Dezaise, P. Bocher. 2006 « Microstructure and mechanical characterisation of FSW 7075-T6 lap joints ». Aerospace Materials and Manufacturing: Emerging Materials, Processes, and Repair Techniques (Montréal, Canada, Oct.1-4, 2006) Canadian Institute of Mining, Metallurgy and Petroleum
J. Gholipour, M. Jahazi. 2006 « Effect of lubricant in hydroforming of Ni-based super alloy tubes ». Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006) Canadian Institute of Mining, Metallurgy and Petroleum
F. Jalilian, R. A. L. Drew, M. Jahazi. 2006 « Joining of Inconel 617 sheets using TLP bonding process with Ni-Si-B interlayer ». Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006) Canadian Institute of Mining, Metallurgy and Petroleum
E. Uta, M. Humbert, N. Gey, P. Bocher, M. Jahazi. 2006 « Mise en évidence et caractérisation des hétérogénéités de textures dans l'alliage de titane IMI 834 de microstructure bimodale à vocation aéronautique ». Materiaux 2006 : Dijon, 13-17 Novembre 2006 : [recueil de la conference sur CD-ROM] (Dijon, France, 13-17 nov. 2006) Université de Bourgogne
P. Vo, S. Yue, M. Jahazi. 2006 « Microstructure development of a near alpha-titanium alloy during high temperature deformation ». Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006) Canadian Institute of Mining, Metallurgy and Petroleum
M. Xiao, P. Wanjara, M. Jahazi, C. Poon. 2006 « Nd:Yag-laser welding of Inconel 718 alloy ». Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006) Canadian Institute of Mining, Metallurgy and Petroleum
H. Al-Kazzaz, M. Medraj, X. Cao, M. Jahazi, X. Min. 2005 « Effect of welding speed on Nd:YAG laser weldability of ZE41A-T5 magnesium sand castings ». Light metals 2005 : proceedings of the International Symposium on Light Metals, August 21-24, 2005, Calgary, Alberta, Canada (Calgary, AB, Canada, Aug. 21-24, 2005) Canadian Institute of Mining, Metallurgy and Petroleum
P. Bocher, M. Jahazi, L. Germain, N. Gey, M. Humbert. 2005 « Variant selection in forged titanium alloys : effect of microscopic grain misorientations on the formation of macroscopic regions with similar crystallographic orientations ». Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, QC, Canada, Aug. 1-4, 2005) École de technologie supérieure
N. Boutana, P. Bocher, M. Jahazi, J. Savoie, D. Piot, F. Montheillet. 2005 « Modelling mechanical behaviour of heterogeneous materials using cellular automata : application to some forged titanium alloys ». Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, QC, Canada, Aug. 1-4, 2005) École de technologie supérieure
X. Cao, M. Xiao, M. Jahazi, Y. L. Lin. 2005 « Nd:YAG laser welding of magnesium alloy castings ». Magnesium Technology 2005: Proceedings of the Symposium Held During the 2005 TMS Annual Meeting in San Francisco, California, U.S.A., February 13-17, 2005 (San Francisco, CA, USA, Feb. 13-17, 2005) The Minerals, Metals & Materials Society
L. Germain, N. Gey, M. Humbert, P. Bocher, M. Jahazi. 2005 « β→-αs variant selection in sharp hcp textured regions of a bimodal IMI834 billet ». Proceedings of the 14th International Conference on Textures of Materials (Leuven, Belgium, July 11-15, 2005) Trans Tech Publications
F. Jalilian, R. A. L. Drew, M. Jahazi. 2005 « Joining of Inconel 617 sheets in TLP bonding using Ni - P and Ni - Si - B alloys ». Trends in Welding Research - Proceedings of the 7th International Conference (Pine Mountain, GA, USA, May 16-20, 2005) ASM International
P. Wanjara, C. Booth-Morrison, E. Hsu, M. Jahazi. 2005 « Process optimization for linear friction welding of Ti-6Al-4V ». Trends in welding research : proceedings of the 7th International Conference (Atlanta, GA, USA, May 16-20, 2005) ASM International
P. Wanjara, H. Monajati, M. Jahazi, L. Germain, P. Bocher, J.-P. Immarigeon. 2005 « Deformation processing mechanism and microstructural evolution in a near-alpha titanium alloy ». Materials science & technology: proceedings of the conference held September 25-28, 2005, Pittsburgh, Pennsylvania USA (Pittsburgh, PA, USA, Sept. 25-28, 2005) Association for Iron and Steel Technology
M. Brochu, S. Girard, M. Jahazi. 2004 « Electron beam free forming using brazing paste and solid wires as filler metal ». Aerospace materials and manufacturing : development, testing, and life cycle issues--honoring William Wallace : proceedings of the Second International Symposium on Aerospace Materials and Manufacturing: Development, Testing, and Life Cycle Issues--Honori (Hamilton, ON, Canada, Aug. 22-25, 2004) Canadian Institute of Mining, Metallurgy and Petroleum
X. Cao, M. Xiao, M. Jahazi. 2004 « Continuous wave Nd: YAG laser welding of ZE41 A-T5 magnesium sand castings: conduction or keyhole mode ». Aerospace materials and manufacturing : development, testing, and life cycle issues--honoring William Wallace : proceedings of the Second International Symposium on Aerospace Materials and Manufacturing: Development, Testing, and Life Cycle Issues--Honori (Hamilton, ON, Canada, Aug. 22-25, 2004) Canadian Institute of Mining, Metallurgy and Petroleum
F. Jalilian, M. Jahazi, R. A. L. Drew, J-P. Immarigeon. 2004 « The influence of processing parameters on TLP joining of Inconel 617 alloy ». 2nd International Symposium on Aerospace Materials and Manufacturing: Development, Testing, and Life Cycle Issues - Honoring William Wallace (Hamilton, ON, Canada, Aug. 22-25, 2004) Canadian Institute of Mining, Metallurgy and Petroleum
L. Germain, N. Gey, M. Humbert, P. Bocher, M. Jahazi. 2003 « Texture and microtexture analysis of an IMI 834 alloy after thermo-mechanical processing ». Ti-2003 Science and Technology : proceedings of the 10th World Conference on Titanium held at the CCH-Congress Center Hamburg, Germany, 13-18 July 2003 (Hamburg, Germany, July 13-18, 2003) Wiley-VCH
M. Jahazi, A. Samadi, S. Yue. 2003 « Determination of the optimum forging conditions for a 7075 aluminum alloy ». Light metals 2003 = Métaux légers : proceedings of the International Symposium on Light Metals 2003 Métaux légers (Vancouver, BC, Canada, Aug. 25-28, 2003) [Canadian Institute of Mining, Metallurgy and Petroleum]
M. Jahazi, A. Khodabandeh, S. T. Aghdashi. 2001 « A method to improve the toughness of forged microalloyed steels ». Proceedings of the 9th Conference of Mechanical Engineering ISME 2001 (Rasht, Iran, June 6-9, 2001)
F. K. Shafie, M. Jahazi, M. Abassi. 2001 « Influence of temperature and percent reduction on aging behavior of T-250 Maraging Steel ». Proceedings of 4th International Conference on Surface Modifications and Heat Treatment (Isphahan, Iran, May 20-23, 2001)
F. K. Shafie, M. Jahazi, Y. Kharazi, M. Abassi. 2001 « Thermomechanical processing of T-250 maraging steel ». Proceedings of the 9th Conference of Mechanical Engineering ISME 2001 (Rasht, Iran, June 6-9, 2001)
S. T. Aghdashi, A. Khodabandeh, M. Jahazi. 2000 « The determination of optimum forging condiions for a vanadium containing microalloyed steel ». The Fourth International Conference on HSLA Steels October 30-November 2, 2000, Xi'an, China (Beijing, China, Oct. 30-Nov. 2, 2000) The chinese society for metals
S. Hossein Nedjad, M. Jahazi. 2000 « Failure analysis and manufacturing technology of seal strips ». Proceedings of the 4th International Manufacturing Conference (Tehran, Iran, )
Mohammad Jahazi, M. Ghomi. 2000 « Texture evolution in two deep drawn aluminum alloys ». J.J. Jonas Symposium on Thermomechanical Processing of Steel: August 20-23, 2000, Ottawa, Ontario, Canada (Ottawa, ON, Canada, Aug. 20-23, 2000) Canadian Institute of Mining, Metallurgy and Petroleum
H. Monajati, M. Jahazi, H. Hosseini. 2000 « A computer code for the evaluation of the residual life of different boiler components ». Proceedings of 15th International Power Engineering Conference (Tehran, Iran, June 18-22, 2000)
A. Samadi, M. Jahazi. 2000 « The determination of optimum heat treatment conditions for the forging of a 7075 Al alloy ». Proceedings of the Second Non-Ferrous Metallurgy Congress, 9-11 May 2000, Univ. of Kerman, Iran (Kerman, Iran, May 9-11, 2000)
M. Jahazi, G. Ebrahimi. 1998 « Flow localization during the forming of an ultra high strength steel ». Proceedings of the Sixth Annual ISME Conference, Tehran, Iran, 1998 (Tehran, Iran, 1998)
H. Monajati, M. Jahazi. 1998 « Residual life evaluation of critical boiler parts ». Proceedings of the International IME Conference, Tehran, Iran, 1998 (Tehran, Iran, 1998)
M. Jahazi, M. Ghomi. 1997 « Microstructural evolution and formability in two aluminium alloys ». Proceedings of the Fifth Annual ISME Conference, Tabriz University, Tabriz, Iran, May 4-6, 1997 (Tabriz, Iran, May 4-6, 1997)
M. Jahazi, A. Samadi. 1997 « The influence of quench parameters on the microstructure and toughness of AISI 4130 steel ». Proceedings of the International IME Conference, Tehran, Iran, 1997 (Tehran, Iran, 1997)
M. Goudarzi, M. Jahazi, A. Fallahi. 1995 « The influence of recrystallization temperature on the earing of a 1100 aluminum alloy ». Proceedings of the International Manufacturing Conference (Tehran, Iran, 1995)
M. Jahazi, F. Jalilian. 1995 « The determination of optimum fiber surface treatment for the production of Cu-Gr composites ». Proceedings of the Conference on Composites Materials (Tokyo, Japan, June 26, 1995) Japan Society of Mechanical Engineers
M. Jahazi, F. Jalilian. 1995 « The influence of chemical treatments on the interface quality and physical properties of copper-graphite composites ». Proceedings of the Tenth International Conference on Composite Materials : Whistler, British Columbia, Canada, August 14th-18th, 1995 (Whistler, BC, Canada, Aug. 14-18, 1995)
M. Hosseinpour, M. Jahazi. 1994 « Optimum welding of AISI 4130 steel ». Proceedings of the 2nd International ISME Conference (Tehran, Iran, May 2-5, 1994)
M. Hosseinpour, M. Jahazi. 1994 « The influence of welding parameters on the HAZ microstructure of an ultra high strength steel ». International Conference on Recent Advances in Materials and Mineral Resources (RAMM '94) : 3-5 May 1994, Penang, Malaysia (Penang, Malaysia, May 3-5, 1994)
F. Jalilian, M. Jahazi. 1994 « The effect of surface treatments on the physical behavior of copper-graphite composites ». International Conference on Recent Advances in Materials and Mineral Resources (RAMM '94): 3-5 May 1994, Penang, Malaysia (Penang, Malaysia, May 3-5, 1994)
F. Jalilian, A. Sedghi, M. Jahazi. 1994 « The influence of carbon fiber surface treatment on the mechanism of copper growth ». Proceedings of the 2nd International ISME Conference (Tehran, Iran, May 2-5, 1994)
H. Sadeghi, M. Shariati, M. Jahazi. 1994 « A computer code for the prediction of forming steps in precision forging ». Proceedings of the 2nd International ISME Conference (Tehran, Iran, May 2-5, 1994)
F. Jalilian, A. Sedghi, M. Jahazi. 1992 « The influence of chemical surface treatment on the wettability of carbon fibers ». Proceedings of the International Confrence on Tribology (Isfahan, Iran, 1992)
A. Akmoulin, M. Djahazi, J. J. Jonas. 1991 « Effect of initial porosity on the superplastic behavior of Y-TZP in vacuum ». Superplasticity in advanced materials: proceedings of the International Conference on Superplasticity in Advanced Materials held in Osaka, Japan, June 3-6, 1991 (Osaka, Japan, June 3-6, 1991)
M. Djahazi, X. L. He, J. J. Jonas. 1990 « Acceleration of Nb(C, N) precipitation in HSLA steels by boron addition ». HSLA steels, processing, properties and applications: proceedings of the Second International Conference on HSLA Steels October 28th-November 2nd, 1990, Beijing, China (Beijing, China, Oct. 28-Nov. 2, 1990)
M. Djahazi, X. L. He, J. J. Jonas, L. Collins. 1990 « The effect of Nb and b on austenite recrystallization ». Recrystallization '90: International Conference on Recrystallization in Metallic Materials: conference proceedings (Wollongong, Australia, Jan. 22-26, 1990) TMS (The Minerals, Metals & Materials Society)
M. Djahazi, X. L. He, J. J. Jonas. 1988 « Effect of boron on the kinetics of precipitation in deformed austenite ». Thermec-88: International Conference on Physical Metallurgy of Thermomechanical Processing of Steels and Other Metals: proceedings, June 6-10, 1988, Keidanren Kaikan, Tokyo, Japan (Tokyo, Japan, June 6-10, 1988) Iron and Steel Institute of Japan
M. Djahazi, X. L. He, J. J. Jonas, G. E. Ruddle. 1988 « Influence of boron distribution on recrystallization and precipitation in a Nb-Ti HSLA steel ». Processing, microstructure, and properties of HSLA steels: proceedings of an International Symposium on Processing, Microstructure, and Properties of HSLA Steels (Pittsburgh, PA, USA, Nov. 3-5, 1987)
M. Djahazi, X. L. He, J. J. Jonas. 1987 « Effect of boron on the precipitation of carbonitrides in a Nb-Ti HSLA steel ». 29th Mechanical Working and Steel Processing Conference: proceedings (Toronto, ON, Canada, Oct. 21-23, 1987)