Martin Viens

• Co-directed by: Maldague, Xavier
  Techniques avancées de traitement de signaux d'émissions acoustiques pour améliorer la détection de défauts dans des vaisseaux sous pression, by Polyakov,Konstantin.
  Winter 2022
  
• Image Acquisition and Processing in an Attempt to Automate the Fluorescent Penetrant Inspection, by Alba,César Augusto Corrêa.
  Summer 2011
  
• Co-directed by: Lebrun, Gilbert
  Effet de l'usinage sur les propriétés mécaniques en tension et contrôle non-destructif des matériaux composites, by Généreux,Louis-Alexandre.
  Fall 2012
  
• Évaluation de méthodes de contrôle non destructives (CND) alternatives pour remplacer l'attaque anodique des superalliages de nickel, by Pourfard,Atousa.
  Fall 2013
  
• Co-directed by: Viens, Martin
  Simulation of Lamb Wave Propagation and Interaction with Defects using Commercially Available Software, by Travaglini,Christophe.
  Fall 2015
  
• Co-directed by: Viens, Martin
  Development of a Low-frequency Piezo-ceramic Transducer Optimized for the Generation of a Plane fundamental Shear Horizontal Guided Wave, by Boivin,Guillaume.
  Summer 2016
  
• Non-Destructive Evaluation of Impact Damage in Carbon Fibre Reinforced Polymer Using Infrared Thermography and Shearography, by Khademi Far,Ali.
  Summer 2020
  

• Characterization of Shrinkage Porosity and Fatigue Properties of Cast CA-6NM Low Carbon Martensitic Stainless Steels, by Meimandi,Shilan.
  Fall 2021
  
• Co-directed by: Tahan, Antoine
  Evaluation of the Reliability of Nondestructive Ultrasonic Inspection Methods for the Detection and the Characterization of Defects in Hydroelectric Turbine Welded Joints, by Habibzadeh Boukani,Hamid.
  Winter 2018
  
• Co-directed by: Xie, Wen-Fang
  Development of an Eddy Current Inversion Algorithm for Characterization of Surface Defects, by Mohseni,Ehsan.
  Summer 2018
  
• Non-destructive Evaluation of Hydrogen Embrittlement in Cadmium-Plated High Strength Steel Using Ultrasonic Surface Waves and Eddy Currents, by Shahmiri,Hamidreza.
  Fall 2021
  
• Co-directed by: Rousseau, Gilles
  Advanced Ultrasonic Inspection Technologies Applied to the Welded Joints of Hydraulic Turbine Runners, by Bajgholi,Mohammadebrahim.
  Winter 2023
  

H. Shahmiri, M. Viens. 2022. « Nondestructive evaluation of electroplating-induced hydrogen embrittlement in cadmium-coated high-strength steel using ultrasonic surface waves ». Materials Evaluation. vol. 79 , nº 11. p. 1094-1104.

Mohammad Ebrahim Bajgholi, Gilles Rousseau, Martin Viens, Denis Thibault. 2021. « Capability of advanced ultrasonic inspection technologies for hydraulic turbine runners ». Applied Sciences. vol. 11 , nº 10. 15 p.

Ehsan Mohseni, Hamid Habibzadeh Boukani, Demartonne Ramos Franca, Martin Viens. 2020. « A study of the automated eddy current detection of cracks in steel plates ». Journal of Nondestructive Evaluation. vol. 39 , nº 1. 12 p.

Ehsan Mohseni, Demartonne Ramos Franca, Martin Viens, Wen Fang Xie, Baoguang Xu. 2020. « Finite element modelling of a reflection differential split-D eddy current probe scanning surface notches ». Journal of Nondestructive Evaluation. vol. 39 , nº 2.

Ehsan Mohseni, Martin Viens, Wen-Fang Xie. 2020. « Adaptive neuro-fuzzy inference system trained for sizing semi-elliptical notches scanned by eddy currents ». Journal of Nondestructive Evaluation. vol. 39 , nº 1.

Konstantin Polyakov, Fernando López, Martin Viens. 2020. « Advanced signal processing techniques to improve the detection of defects in pressure vessels by acoustic emission testing ». The e-Journal of Nondestructive Testing. vol. 25 , nº 12. 2 p.

Guillaume Boivin, Martin Viens, Pierre Belanger. 2018. « Plane wave SH0 piezoceramic transduction optimized using geometrical parameters ». Sensors. vol. 18 , nº 2.

Hamid Habibzadeh Boukani, Martin Viens, Souheil-Antoine Tahan, Martin Gagnon. 2018. « Case study on the integrity and nondestructive inspection of flux-cored arc welded joints of Francis turbine runners ». International Journal of Advanced Manufacturing Technology. vol. 98 , nº 5-8. p. 2201-2211.

Shilan Meimandi, Nicolas Vanderesse, Denis Thibault, Philippe Bocher, Martin Viens. 2017. « Macro-defects characterization in cast CA-6NM martensitic stainless steel ». Materials Characterization. vol. 124 p. 31-39.

Christophe Travaglini, Christophe Bescond, Martin Viens, Pierre Belanger. 2017. « Feasibility of high frequency guided wave crack monitoring ». Structural Health Monitoring. vol. 16 , nº 4.

J. Zheng, W. F. Xie, Martin Viens, L. Birglen, I. Mantegh. 2015. « Design of an advanced automatic inspection system for aircraft parts based on fluorescent penetrant inspection analysis ». Insight: Non-Destructive Testing and Condition Monitoring. vol. 57 , nº 1. p. 18-24 and 34.

Sylvie Nadeau, Michèle Bouchard, Maximilien Debia, Nathalie DeMarcellis-Warin, Stéphane Hallé, Victor Songmene, Marie-Christine Therrien, Kevin Wilkinson, Barthelemy Ateme-Nguema, Genevieve Dufour, André Dufresne, Julien Fatisson, Sami Haddad, Madjid Hadioui, Jules Kouam, François Morency, Robert Tardif, Martin Viens, Scott Weichenthal, Claude Viau, Michel Camus. 2013. « EquiNanos: innovative team for nanoparticle risk management ». Nanomedicine : Nanotechnology, Biology and Medicine. vol. 9 , nº 1. p. 22-24.

J. Y. Chen, S. V. Hoa, C. K. Jen, M. Viens, J. P. Monchalin. 1998. « Ultrasonic evaluation of graphite/epoxy composites with different curing conditions ». Polymer Composites. vol. 19 , nº 3. p. 225-232.

H. Wang, B. Cao, C. K. Jen, K. T. Nguyen, M. Viens. 1997. « On-line ultrasonic monitoring of the injection molding process ». Polymer Engineering and Science. vol. 37 , nº 2. p. 363-376.

Xing Li, Zuoqing Wang, Cheng Kuei Jen, Martin Viens, J. David N. Cheeke. 1996. « Ultrasonic thin-walled tube wave structure for sensing devices ». IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control. vol. 43 , nº 2. p. 331-336.

Yuan Liu, Martin Viens, David Cheeke. 1996. « Behavior of extensional modes in a thin rod immersed in a viscous medium ». Journal of the Acoustical Society of America. vol. 99 , nº 2. p. 706-712.

Martin Viens, Paul C. H. Li, Zuoqing Wang, Cheng Kuei Jen, Michael Thompson, J. David N. Cheeke. 1996. « Mass sensitivity of thin rod acoustic wave sensors ». IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control. vol. 43 , nº 5. p. 852-857.

X. Li, J. D. N. Cheeke, Z. Wang, C. K. Jen, M. Viens, G. Yi, M. Sayer. 1995. « Ultrasonic thin-walled tube wave devices for sensor applications ». Applied Physics Letters. vol. 67 , nº 1. p. 37-39.

M. Viens, Y. Tsukahara, C. K. Jen, J. D. N. Cheeke. 1994. « Leaky torsional acoustic modes in infinite clad rods ». Journal of the Acoustical Society of America. vol. 95 , nº 2. p. 701-707.

Y. Liu, M. Viens, J. D. N. Cheeke, C. K. Jen. 1993. « Anomalous magnetoelastic waves in nickel wire ». Journal of Applied Physics. vol. 73 , nº 5. p. 2584-2586.

Zuoqing Wang, Martin Viens, Cheng-Kuei Jen, David Cheeke, Yuan Liu. 1991. « Analysis of thin rod acoustic wave gravimetric sensors ». Sensors and Materials. vol. 3 , nº 3. p. 159-172.

Martin Viens, J. David N. Cheeke. 1990. « Highly sensitive temperature sensor using SAW resonator oscillator ». Sensors and Actuators: A. Physical. vol. 24 , nº 3. p. 209-211.

Mohammad E. Bajgholi, Gilles Rousseau, Martin Viens, Denis Thibault. 2020. « Performance of Ultrasonic Inspection on hydroelectric turbine runner ». Communication during a conference : 3rd International Symposium on Structural Health Monitoring and Nondestructive Testing ( Québec, QC, Canada, Nov. 25-26, 2020 )

Mohammad Ebrahim Bajgholi, Martin Viens. 2019. « Evaluation of the dead zones in the welded joints of hydraulic turbine runners ». Communication during a conference : NDT in Canada 2019 ( Edmonton, AB, Canada, June 18-20, 2019 )

Ali Khademi Far, Louis-Daniel Théroux, Martin Viens, Oliver Arés, Hakim Bendada. 2019. « Non-destructive evaluation of impact damage in CFRP by means of IRT, shearography and ultrasonic testing ». Communication during a conference : NDT in Canada 2019 ( Edmonton, AB, Canada, June 18-20, 2019 )

H. H. Boukani, E. Mohseni, M. Viens. 2017. « Effect of fatigue crack orientation on the sensitivity of eddy current inspection in martensitic stainless steels ». Communication during a conference : NDT in Canada 2017 ( Québec, QC, Canada, June 06-08, 2017 )

E. Mohseni, M. Viens. 2017. « Sensitivity of eddy current signals to probe's tilt and lift-off while scanning semi-elliptical surface notches - a finite element modeling approach ». Communication during a conference : NDT in Canada 2017 ( Québec, QC, Canada, June 06-08, 2017 )

Denis Thibault, Shilan Meimandi, Nicolas Vanderesse, Philippe Bocher, Martin Viens, Myriam Brochu, Martin Gagnon. 2017. « Linking defects found by non-destructive testing in stainless steel castings to the fatigue analysis of hydraulic turbines ». Communication during a conference : 3rd International Symposium on Fatigue Design and Material Defects (FDMD) ( Lecco, Italy, Sept. 19-22, 2017 )

Martin Viens, N. Fournier, S. Carpentier. 2011. « Les défis NDT en aéronautique ». Communication during a conference : Atelier Organisé dans le Cadre du Colloque Aérotechnique ( Montréal, QC, Canada, 15 mars 2011 )

Stéphane Hallé, Jules Kouam, Victor Songmene, François Morency, Martin Viens, Yves Cloutier, Jacques Masounave, Riad Khettabi, Abdelhakim Djebara. 2009. « Procédure de mesure et de contrôle des nanoparticules manufacturés ». Communication during a conference : Conférences Scientifiques, Sécurité des Travailleurs et Contrôle des Risques Industriels ( Montréal, QC, Canada, 17 sept. 2009 )

R. Khettabi, A. Djebara, V. Songméné, M. Viens, S. Hallé, F. Morency, Y. Cloutier, J. Kouam, J. Masounave. 2009. « Procedure of measuring and controlling manufactured nanoparticles ». Communication during a conference : INNO 2009 : La semaine de l'innovation ( Montréal, QC, Canada, 23-24 avr. 2009 )

Louis-Alexandre Généreux, Gilbert Lebrun, Martin Viens, Jean-François Chatelain. 2019. « Evaluation of machining defects in a composite laminate by combining non-destructive and tensile testing ». In Materials Design and Applications II Coll. «Advanced Structured Materials», . p. 341-362. Springer Verlag.

Guillaume Boivin, Martin Viens, Pierre Belanger. 2016. « Development of a low frequency shear horizontal piezoelectric transducer for the generation of plane SH waves ». 42nd annual review of progress in quantitative nondestructive evaluation : incorporating the 6th European-American Workshop on Reliability of NDE (Minneapolis, MN, USA, July 26-31, 2015) AIP Publishing.

Ehsan Mohseni, Martin Viens, Demartonne R. Franca. 2016. « A model-based study of the effect of semi-elliptical surface notch geometry on the signal of a Split-D eddy current probe ». NDT Canada 2016 (Burlington, ON, Canada, Nov. 15-17, 2016) CINDE.

Christophe Travaglini, Christophe Bescond, Dermartonne Ramos Franca, Silvio E. Kruger, Martin Viens, Pierre Bélanger. 2016. « Scattering of high order guided wave modes around a through-thickness circular hole ». 42nd annual review of progress in quantitative nondestructive evaluation : incorporating the 6th European-American Workshop on Reliability of NDE (Minneapolis, MN, USA, July 26-31, 2015) AIP Publishing.

Lionel Birglen, Benoit Leblanc, Xavier Maldague, Iraj Mantegh, Sylvain Roberge, Martin Viens, Wen-fang Xie. 2015. « Introduction of a robotic system for aerospace manufacturing: The case for non-destructive inspection and beyond ». 62nd CASI Aeronautics Conference (Montreal, QC, Canada, May 19-21, 2015)

H. H. Boukani, S. M. Chentouf, Martin Viens, S.-Antoine Tahan, M. Gagnon. 2015. « The effect of martensitic stainless steel microstructure on the ultrasonic inspection of turbine runner joints ». AIP Conference Proceedings (Boise, ID, USA, July 20-25, 2014) p. 909-916. USA : AIP - American Institute of Physics.

P-C. Ostiguy, M. H. Sherafat, D. R. Franca, N. Bouslama, N. Quaegebeur, A. Maslouhi, L. Lessard, P. Hubert, M. Viens, M. R. Mofakhami, Z. Hajjar, P. Masson. 2015. « Selection of structural features for the systematic study of guided wave propagation and interaction with damage ». Structural health monitoring 2015 : System Reliability for Verification and Implementation (Stanfort, CA, USA, Sept. 1-3, 2015) p. 1973-1980. Destech Publications.

H. H. Boukani, Martin Viens, S.-Antoine Tahan, M. Gagnon. 2014. « On the performance of nondestructive testing methods in the hydroelectric turbine industry ». 27th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2014) (Montreal, QC, Canada, Sept. 22-26, 2014) IOP Publishing.

Baoguang Xu, W. F. Xie, Martin Viens, Ehsan Mohseni, Lionel Birglen, Iraj Mantegh. 2013. « Intelligent eddy current crack detection system design based on neuro-fuzzy logic ». Proceedings of the The NDT in Canada 2013 Conference in conjunction with the International Workshop on Smart Materials & Structures, SHM and NDT for the Energy Industry (Calgary, AB, Canada, Oct. 7-10, 2013)

J. Zheng, W. F. Xie, Martin Viens, L. Birglen, I. Mantegh. 2013. « Design of advanced automatic inspection system for turbine blade FPI analysis ». Review of Progress in Quantitative Nondestructive Evaluation (Denver, CO, USA, July 15-20, 2012) p. 612-619. USA : American Institute of Physics.

P. Masson, N. Quaegebeur, P. Micheau, A. Maslouhi, M. Viens, L. Lessard, P. Hubert, S. Kruger. 2012. « Characterization of guided wave propagation in aircraft structures ». Recherche et Innovation pour les Transports du Futur (RITF 2012) (Paris, France, Nov.12-16, 2012)

C. A. C. Alba, Martin Viens, X.-W. Tu. 2011. « Development of an image acquisition and processing system for automation of fluorescent penetrant inspection (FPI) ». 58th Aeronautics Conference and AGM (AERO 2011) (Montreal, Canada, Apr. 26-28, 2011) Kanata, Canada : Canadian Aeronautics and Space Institute.

L. A. Généreux, Martin Viens, G. Lebrun. 2011. « Comparison of ultrasonic testing and infrared thermography for the detection of machining defects in composite materials ». Proceedings of the American Society for Composites--Twenty-Sixth Technical Conference (Montréal, Canada, Sept. 26-28, 2011) Lancaster, Penn., USA : DEStech Publications Inc..

A. Szymanski, J. Masounave, M. Viens, J. Litwin. 2008. « Émission de poussière par frottement ». Colloque USIFORME 2007 (Montréal, QC, Canada, 3-5 mars 2008)

A. Szymanski, J. Masounave, M. Viens. 2007. « Les différentes sources d’émission de particules fines et ultrafines dans l’air ». Premier congrès international sur l'ingénierie des risques industriels : CIRI 2007 : Montréal (Québec) Canada, 17-18 et 19 décembre 2007 : actes (Montréal, QC, Canada, 17-19 déc. 2007) Montréal : École de technologie supérieure.

Martin Viens, Z. Wang. 2005. « HBAR-spectroscopy used for materials characterization ». 32nd Annual Review of Process in Quantitative Nondestructive Evaluation (Brunswick, ME, USA, Jul. 31-Aug. 5, 2005) Melville, NY, USA : American Institute of Physics.

M. Choquet, D. Lévesque, C. Néron, B. Reid, M. Viens, J.-P. Monchalin, J. P. Komorowski, R. W. Gould. 1998. « Detection of corrosion in aging aircraft structures by laser-ultrasonics ». Nondestructive Characterization of Materials VIII (Boulder, CO, USA, June 15-20, 1997) p. 73-78. Boston, MA : Springer US.

J.-P. Monchalin, C. Néron, M. Choquet, A. Blouin, B. Reid, D. Lévesque, D. Drolet, M. Viens, P. Bouchard, R. Héon, C. Padioleau. 1998. « Laser-ultrasonics inspection and characterization of aeronautic materials ». Alliance of the Americas : the First Pan-American Conference : proceedings of the 1st Pan-American Conference (Toronto, ON, Canada, Sept. 14-18, 1998) Missisauga, Ont. : Canadian Society for Nondestructive Testing Inc..

J.-P. Monchalin, C. Néron, M. Choquet, D. Drolet, M. Viens, P. Bouchard, R. Héon, C. Padioleau. 1998. « Laser-ultrasonics inspection and characterization of aeronautic materials ». 7th European Conference on Non-destructive Testing (ECNDT) (Copenhagen, Denmark, May 26-29, 1998) p. 19-26. ECNDT.

M. Viens, H. Hébert, C. K. Jen. 1998. « Ultrasonic measurement of the remaining thickness of corroded cast iron samples ». III International Workshop--Advances in Signal Processing for NDE of Materials (Québec, QC, Canada, Aug. 05-08, 1997) p. 327-334. Columbus, OH : The American Society for Nondestructive testing.

Bin Cao, H. Wang, Chen-Kuei Jen, N. T. Nguyen, J. Legoux, Chee Ang Loong, Martin Viens. 1996. « Ultrasonic monitoring of injection molding and die casting ». Nondestructive Evaluation for Process Control in Manufacturing (Scottsdale, AZ, USA, Dec. 03-05, 1996) p. 173-186. SPIE.

J. D. N. Cheeke, Z. Wang, M. Viens. 1996. « Thermal sprayed coatings characterization by acoustic waves ». 1996 IEEE Ultrasonics Symposium : Proceedings (San Antonio, TX, USA, Nov. 03-06, 1996) p. 749-752. IEEE.

J.-Y. Chen, S. V. Hoa, C. K. Jen, M. Viens, J.-P. Monchalin. 1996. « Ultrasonic evaluation of graphite/epoxy composites with different curing conditions ». Composites '96 and Oriented Polymers Symposium : book of proceedings (Boucherville, QC, Canada, 09-11 oct. 1996) p. 249-259. National Research Council Canada, Industrial Materials Institute.

M. Dubois, M. Viens, A. Moreau, C. K. Jen. 1996. « Ultrasonic attenuation measurements at 300 MHz ». First half of the proceedings of the Twenty-Second Symposium on Quantitative Nondestructive Evaluation (Seattle, WA, United states, July 30-Aug. 04,1995) p. 1439-1446. New York : Plenum Press.

J.-P. Monchalin, C. Néron, G. Vaudreuil, A. Blouin, D. Drolet, M. Dubois, M. Viens, P. Bouchard, M. Choquet, R. Héon, C. Padioleau, J.-D. Aussel. 1996. « Laser-ultrasonics for inspection and characterization of aeronautic materials ». AeroMat '96 (Dayton, OH, USA, June 03-06, 1996)

M. Viens, D. Drolet, A. Blouin, J.-P. Monchalin, C. Moreau. 1996. « Nondestructive characterization of plasma sprayed coatings by laser ultrasonics ». Thermal spray 1996: Practical solutions for engineering problems, proceedings of the 9th National thermal spray conference (Cincinnati, OH, USA, Oct. 07-11, 1996) p. 947-951. ASM International.

Martin Viens, Daniel Lévesque, Chen-Kuei Jen, Harold Hébert. 1996. « In-situ ultrasonic thickness measurement of underground water mains ». Nondestructive Evaluation of Utilities and Pipelines (Scottsdale, AZ, USA, Dec. 03-05, 1996) p. 157-164. SPIE.

X. Li, Z. Wang, C. K. Jen, M. Viens, J. D. N. Cheeke, G. Yi, M. Sayer. 1994. « Ultrasonic thin wall tube wave sensors ». 1994 Proceedings of IEEE Ultrasonics Symposium (Cannes, France, Oct. 31-Nov. 03, 1994) p. 623-628. IEEE.

M. Viens, P. C. H. Li, Z. Wang, C. K. Jen, M. Thompson, J. D. N. Cheeke. 1993. « Gravimetric response of thin rod acoustic wave sensors ». 1993 Proceedings IEEE Ultrasonics Symposium (Baltimore, MD, USA, Oct. 31-Nov. 03, 1993) p. 359-364. IEEE.

M. Viens, Y. Liu, Z. Wang, C. K. Jen, J. D. N. Cheeke. 1992. « Investigations of extensional and torsional acoustic wave thin rod sensors ». First half of the proceedings of the Eighteenth Annual Review of Progress in Quantitative Nondestructive Evaluation (Brunswick, ME, USA, July 28-Aug. 02, 1991) p. 1059-1065. New York : Springer Science+Business Media.

C. K. Jen, J. C. H. Yu, Z. Wang, M. Viens, J. D. N. Cheeke, J. D. Dai. 1991. « Thin rod flexural acoustic wave devices: A sensor candidate ». Second half of the proceedings of the Seventeenth Annual Review of Progress in Quantitative Nondestructive Evaluation (La Jolla, California, July 15-20,1990) p. 2157-2163. New York : Plenum Press.

Yuan Liu, M. Viens, J. D. N. Cheeke, C. K. Jen. 1991. « Anomalous magnetoelastic waves in nickel wire ». IEEE Ultrasonics Symposium (Orlando, FL, USA, Dec. 08-11, 1991) p. 1075-1078. IEEE.

Z. Wang, M. Viens, C. K. Jen, J. D. N. Cheeke, Y. Liu. 1990. « Analysis of thin rod acoustic wave gravimetric sensors ». IEEE Symposium on Ultrasonics (Honolulu, HI, USA, Dec. 04-07, 1990) p. 345-349. IEEE.

Victor Songmene, Riad Khettabi, Martin Viens, Jules Kouam, Stéphane Hallé, François Morency, Jacques Masounave, Abdelhakim Djebara. 2015. « Nanoparticle measurement, control and characterization: procedure applied to machining and mechanical friction ». «Studies and Research Projects» IRSST. 82 p.

Victor Songmene, Riad Khettabi, Martin Viens, Jules Kouam, Stéphane Hallé, François Morency, Jacques Masounave, Abdelhakim Djebara. 2014. « Mesure, contrôle et caractérisation des nanoparticules : Procédure appliquée à l'usinage et au frottement mécanique ». Montréal, Québec, Canada. «Études et recherches» IRSST. 93 p.

André Moreau, Martin Lord, Daniel Lévesque, Marc Dubois, Jean Bussière, Jean-Pierre Monchalin, Christian Padioleau, Guy Lamouche, Teodor Veres, Martin Viens, Harold Hébert, Pierre Basseras, Cheng-Kuei Jen. 2001. « On-line, non-destructive mechanical property measurement using laser-ultrasound ». «AISI/DOE Advanced Process Control Program Vol. 4 of 6» 10.2172/794988 110 p.

P. Masson, A. Maslouhi, P. Micheau, N. Quaegebeur, L. Lessard, P. Hubert, M. Viens, S. Kruger, M. R. Mofakhami, J. Pinsonnault, Z. Hajjar, P-C. Ostiguy, M. Sherafat, D. Ramos Franca. 2014. « Characterization of guided wave propagation in aircraft structures ». Poster presented during a conference : 1er Forum du Réseau national | 7e Forum du CRIAQ ( Montreal, QC, Canada, Apr. 16-17, 2014 )

Riad Khettabi, Abdelhakim Djebara, Victor Songmene, Martin Viens, Stéphane Hallé, François Morency, Yves Cloutier, Jules Kouam, Jacques Masounave. 2009. « Control and measuring of manufactured nanoparticle ». Poster presented during a conference : INNO 09 : La Semaine de l'Innovation ( Montréal, Canada, 23-24 avril 2009 )

Martin Viens. 1993. « Conception et caractérisation de capteurs acoustiques ». Thèse de doctorat. Sherbrooke , Université de Sherbrooke