Souheil-Antoine Tahan

Souheil-Antoine Tahan
Professeur
Degrees B.Sc.A., M.Sc., Ph.D. (Université Laval)
Office A-1904
Presentation

Département de génie mécanique

Research interests:

  • Aerospace
  • Materials and manufacturing
  • Energy

Research areas:

  • Metrology
  • Geometric tolerance (GD & T)
  • Process capability
  • Uncertainty measurement
  • Reliability and predictive maintenance
  • Quality
Publications: conference_item
12th CIRP Conference on Computer Aided Tolerancing
Publications: conference_item
2e Sommet Québec-Aquitaine-Midi-Pyrénées sur l'Usinage Haute Performance : Colloque sur l'Usinage à Sec
Publications: article

Publications: article

Publications: conference_item
11th International Conference on Modeling, Optimization & Simulation (MOSIM)
Publications: conference_item
Annual Conference of the Prognostics and Health Management Society 2015
Publications: article

Publications: conference_item
SAE 2013 AeroTech Congress and Exhibition (AEROTECH)
Publications: article

Publications: conference_item
2018 World Congress of Engineering Asset Management (WCEAM)
Publications: conference_item
Surveillance 7 : international conference : October 29-30, 2013, Chartres, France
Publications: article

Publications: article

Publications: article

Publications: article

Publications: conference_item
2016 IEEE International Conference on Prognostics and Health Management (ICPHM)
Publications: article

Publications: conference_item
CMVA Conference : Covering the Spectrum: From Fundamentals to Future Trends
Publications: conference_item
2nd International Conference on Fluid Mechanics and Heat and Mass Transfer (FLUIDSHEAT'11), 2nd International Conference on Theoretical and Applied Mechanics (TAM'11), 4th WSEAS International Conference on UPT'11 (CUHT'11)
Publications: conference_item
CIRI 2013, 3ème Congrès International sur l’Ingénierie des Risques Industriels
Publications: conference_item
Advances in Condition Monitoring of Machinery in Non-Stationary Operations: Proceedings of the Fourth International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO'2014, Lyon, France December 15-17
Publications: conference_item
7th HPC 2016 - CIRP Conference on High Performance Cutting
Publications: article

Publications: conference_item
AIP Conference Proceedings
Publications: conference_item
27th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2014)
Publications: conference_item
Advances in Condition Monitoring of Machinery in Non-Stationary Operations : Proceedings of the third International Conference on Condition Monitoring of Machinery in Non-Stationary Operations CMMNO 2013
Publications: conference_item
4th Colloque Experimental Vibration Analysis, AVE 2014, November 18, 2014 - November 20, 2014
Publications: conference_item
ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference (MSEC)
Publications: conference_item
13th CIRP Conference on Computer Aided Tolerancing, CAT 2014, May 11, 2014 - May 14, 2014
Publications: article

Publications: article

Publications: conference_item
International Conference on Advances in Energy Systems and Environmental Engineering (ASEE 2017)
Publications: article

Publications: article

Publications: article

Publications: article

Publications: article

Publications: conference_item
27th IAHR Symposium on Hydraulic Machinery and Systems, IAHR 2014
Publications: article

Publications: article

Publications: article

Publications: article

Publications: conference_item
SAE 2013 AeroTech Congress and Exhibition (AEROTECH)
Publications: article

Publications: conference_item
Manufacturing Science and Technology (ICMST2013)
Publications: article

Publications: conference_item
5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle
Publications: article

Publications: conference_item
4th International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS)
Publications: article

Publications: conference_item
29th IAHR Symposium on Hydraulic Machinery and Systems
Publications: conference_item
26th IAHR Symposium on Hydraulic Machinery and Systems
Publications: article

Publications: article

Publications: article

Publications: conference_item
28th IAHR symposium on Hydraulic Machinery and Systems (IAHR2016)
Publications: conference_item
10th International Conference on Optimum Design in Engineering (OPTI)
Publications: article

Publications: conference_item
7th HPC 2016 - CIRP Conference on High Performance Cutting
Publications: article

Publications: conference_item
3th International Symposium on Aerospace Materials and Manufacturing Processes: Emerging Materials, Manufacturing, and Repair Techniques
Publications: conference_itemaff

Publications: conference_item
5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle
Publications: article

Publications: monograph

Publications: conference_itemau

Publications: book

Publications: article

Publications: conference_item
25e Colloque sur la progression de la recherche québécoise sur les ouvrages d’art
Publications: article

Publications: conference_item
OSIsoft Wind Power User Group Meeting
Publications: conference_itemau

Publications: article

Publications: article

Publications: article

Publications: conference_itemaff

Publications: conference_itemau

Publications: conference_item
30th Canadian Machinery Vibration Association (CMVA)
Publications: article

Publications: article

Publications: article

Publications: conference_itemau

Publications: article

Publications: conference_item
11th International Conference on Modeling, Optimization & Simulation (MOSIM)
Publications: conference_item
Proceedings of the International Conference on Product Lifecycle Management : Supporting the Extended Enterprise
Publications: article

Publications: article

Publications: article

Publications: conference_item
5th symposium on Advances in Science and Technology
Publications: conference_item
28th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2016)
Publications: article

Publications: conference_item
5th International Conference on Fatigue Design, Fatigue Design 2013
Publications: conference_item
26th IAHR Symposium on Hydraulic Machinery and Systems
Publications: article

Publications: conference_item
Proceedings of the Canadian Society of Mechanical Engineering Forum
Publications: article

Publications: conference_item
25th IAHR Symposium on Hydraulic Machinery and Systems
Publications: article

Publications: article

Publications: article

Publications: article

Publications: article

Publications: article

Publications: conference_item
Compte rendu 24ième séminaire sur la vibration des machines : ACVM, 25-27 octobre 2006
Publications: conference_item
Proceedings of International Conference on Computers and Industrial Engineering, CIE
Publications: conference_item
25th Canadian Congress of Applied Mechanics
Publications: conference_itemaff

Publications: conference_itemau

Publications: article

Publications: book_section
Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics
Publications: article

Publications: article_nrp

Publications: conference_itemau

Publications: conference_itemau

Publications: conference_itemau

Publications: conference_itemau

Publications: article

Publications: conference_item
International Conference on Computers and Industrial Engineering (CIE)
Publications: conference_item
International Conference on Computers and Industrial Engineering (CIE)
Publications: conference_item
5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle
Publications: conference_itemau

Publications: conference_item
The HydroVision International Conference
Publications: conference_item
Computational aspects of electromechanical energy converters and drives, 7-8-9 July 1993 : proceedings [of the the] 4th international conference = La modelisation en simulation des machines electriques et des convertisseurs statiques, 7-8-9 Juillet 1993 :
Publications: conference_item
Computational aspects of electromechanical energy converters and drives, 7-8-9 July 1993 : proceedings [of the the] 4th international conference = La modelisation en simulation des machines electriques et des convertisseurs statiques, 7-8-9 Juillet 1993 :
Publications: conference_item
Proceedings of the 2nd International Congress of Automation in the Mining Industry
Publications: article

Publications: article

Publications: conference_itemau

Publications: conference_itemaff

Publications: conference_item
Research and Innovation for Transport Systems of the Future (RITF)
Publications: article

Publications: article

Publications: article

Publications: conference_item
11th International Conference on Modeling, Optimization & Simulation (MOSIM)
Publications: conference_item
ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference
Publications: conference_item
IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)
Publications: article

Publications: conference_itemau

Publications: conference_item
Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada
Publications: article

Publications: conference_item
1st International Conference on Virtual Machining Process Technology (VMPT)
Publications: article

Publications: article

Publications: article

Publications: article

Publications: article

Publications: conference_item
30th Canadian Machinery Vibration Association (CMVA)
Publications: article

Courses and support services

Courses

MEC788 Mécatronique (Fall 2019)
MEC795 Projet de fin d'études en génie mécanique (Summer 2019)
MEC602 Tolérancement et métrologie tridimensionnelle (Winter 2019)
SYS814 Méthodologies expérimentales pour ingénieur (Winter 2019)

Assistance to students

Mémoire à 30 crédits

    Modélisation de la pile LMP (Lithium Métal Polymère), by Castonguay,Jean-Philippe.
    Summer 2007

    Co-directed by: Chatelain, Jean-François
    Modélisation des variations dimensionnelles et géométriques d'une structure soudée dans le cas d'une structure d'autocar, by Lévesque,Sylvain.
    Winter 2009

    Co-directed by: Maranzana, Roland
    Nouvelle méthode d'inspection des pièces flexibles sans gabarit de conformité, by Abenhaïm,Gad-Noriel.
    Winter 2009

    Co-directed by: Thomas, Marc
    Contribution à l'identification de paramètres modaux sur des structures immergées, by Gagnon,Martin.
    Summer 2008

    Co-directed by: Zhao, Yaoyao Fiona
    3D Scanner use for Rub Measurements within Seals or Casings (WP1, Project #2), by Kazemeyni,Seyed Sajad.
    Fall 2019

    Co-directed by: Kenné, Jean-Pierre
    Modélisation d'un modèle prédictif du réseau de transport d'électricité de Hydro-Québec Trans Énergie en fonction de la pérénité du réseau et la maintenance basée sur la fiabilité, by Migirditsian,Gilbert.
    Fall 2009

    Co-directed by: Dufresne, Louis
    Modélisation CFD et caractérisation de la dynamique de l'écoulement et du mélange dans un mélangeur planétaire sans lamelle, by Lacroix,Etienne.
    Fall 2009

    Co-directed by: Chatelain, Jean-François
    Geometrical inspection of flexible parts using intrinsic geometry, by Radvar-Esfahlan,Hassan.
    Summer 2010

    Co-directed by: Rioux, Michel
    Méthodologie de sélection d'anti-erreur à l'assemblage par calcul de l'efficacité et du coût global d'une application, by Blais,Gilles.
    Summer 2011

    Co-directed by: Cambron, Philippe
    Estimation du dommage cumulé dans les éoliennes, by Khorchani,Wissem.
    Fall 2019

    Amélioration de la prédiction de la capabilité des centres d'usinage à têtes multiples, by Cauvier,Jason.
    Summer 2011

    Co-directed by: Caron, Mireille
    Une méthodologie pour l'implantation et le maintien du Lean dans les entreprises manufacturières québécoises, by Beaulieu-Paré,Nicolas.
    Summer 2011

    Co-directed by: Marcouillier, Luc
    Modélisation de l'historique d'opération de groupes turbine-alternateur, by Szczota,Mickaël.
    Summer 2012

    Co-directed by: Coutu, André
    Analyse et interpolation spatiale de champs de déformations sur les aubes de turbines hydrauliques, by Arpin-Pont,Jérémy.
    Fall 2012

    Co-directed by: Coutu, André
    Modélisation et simulation du comportement dynamique des aubes de turbines hydroélectriques, by Poirier,Marc.
    Fall 2013

    Estimation des indices de capabilité d'un assemblage mécano-soudé en tenant compte de la complexité géométrique, by Lépine,Marc Junior.
    Fall 2013

    Co-directed by: Gagnon, Martin
    Modélisation de la propagation des incertitudes des mesures sur l'aube d'une turbine hydraulique par krigeage et simulations stochastiques, by Ben Salah,Firas.
    Fall 2014

    Co-directed by: David, Éric
    Développement d'un système de gestion de la qualité dans le milieu textile, by Jarmouni,Fatiha.
    Fall 2015

    Co-directed by: Gagnon, Martin
    Optimisation des contraintes mécaniques au démarrage des turbines hydroélectriques à l'aide de mesures indirectes, by Diagne,Ismahel.
    Winter 2016

    Co-directed by: Maranzana, Roland
    Modélisation de la complexité géométrique des composants mécaniques, by Abouchalghouma,Badreddine.
    Summer 2016

    Co-directed by: Gagnon, Martin
    Méthodologie de validation des modèles numériques utilisés lors de la prédiction des contraintes sur les aubes de turbines hydroélectriques, by Chatenet,Quentin.
    Summer 2016

    Co-directed by: Gagnon, Martin
    Modélisation et analyse technico-économique de la cavitation et de la fissuration d'une roue de turbine hydraulique, by Lamothe,Thibaud.
    Winter 2018

    Co-directed by: Bonev, Ilian
    Contribution sur la répétabilité en position des robots industriels, by Khirani,Hemza.
    Fall 2019

    Co-directed by: Rivest, Louis
    Évaluation des performances métrologiques et économiques de l'inspection à partir de logiciels d'automation sur MMT à partir des maquettes numériques enrichies, by Drouin Laberge,Clément.
    Winter 2020

    Co-directed by: Abacha, Nabil
    Optimisation de l'allocation des tolérances sur les gabarits d'usinage, by Souilah,Mondher.
    Fall 2019

    Analyse de l'erreur du positionnement assisté par la métrologie 3D sans contact, by Emond-Girard,Laurent.
    Fall 2019

Mémoire à 24 crédits

    Co-directed by: Songmene, Victor
    Étude expérimentale de l'usinage à haute vitesse des pièces à parois minces, by Michaud,Jean-Pierre.
    Winter 2007

    Co-directed by: Laville, Frédéric
    Développement d'un indice d'usure dédié au diagnostic des commutateurs de prises en charge, by Clément,Pascal.
    Fall 2007

Thèse de doctorat (recherche appliquée)

    Co-directed by: Gagnon, Martin
    Fiabilité en fatigue des aubes des turbines hydrauliques dans un contexte imprécis, by Berdai,Mounia.
    Summer 2017

    Co-directed by: Brailovski, Vladimir
    Contribution au développement d'un modèle probabiliste basé sur l'effet d'échelle et sur la complexité géométrique pour estimer la capacité du procédé 3DP-SLM, by Zongo,Teega Wende Floriane.
    Fall 2019

    Co-directed by: David, Éric
    Caractérisation des signatures de décharges partielles en utilisant une nouvelle génération de coupleurs piézoélectriques, by Danouj,Boujemâa.
    Summer 2012

    Co-directed by: Bocher, Philippe
    Contribution à l'évaluation de la fiabilité en fatigue des turbines hydroélectriques, by Gagnon,Martin.
    Winter 2013

    Inspection des pièces flexibles sans gabarit de conformation, by Aidibe,Ali.
    Fall 2013

    Fixtureless Geometric Inspection of Nonrigid Parts Using "Generalized Numerical Inspection Fixture", by Radvar-Esfahlan,Hassan.
    Fall 2013

    Co-directed by: Pham, Tan
    Dimensional Metrology of Non-rigid Parts without Specialized Inspection Fixtures, by Sabri,Vahid.
    Fall 2016

    Co-directed by: Gamache, Michel
    Contribution à l'amélioration des politiques d'opération des turbines hydrauliques, by Bigeon,Emmanuel.
    Fall 2019

    Co-directed by: Thomas, Marc
    A Contribution to Online Tool Wear Detection, by Aghazadehkouzekonani,Fatemeh.
    Fall 2019

    Co-directed by: Komljenovic, Dragan
    Développement d'une méthodologie globale permettant l'élaboration de systèmes pronostics intelligents, by Blancke,Olivier.
    Fall 2019

    Co-directed by: Fouladirad, Mitra
    Contribution à la modélisation et la prédiction de la fiabilité résiduelle d'une roue de turbine hydraulique, by Chatenet,Quentin.
    Fall 2019

    Assemblage assisté par la métrologie tridimensionnelle sans recours à des gabarits, by Bellil,Mohamed.
    Fall 2019

    Co-directed by: Thomas, Marc
    Automatisation du contrôle de la qualité d'un produit usiné : proposition d'un modèle de diagnostic basé sur une approche par l'apprentissage machine, by Proteau,Antoine.
    Fall 2019

    Co-directed by: Mahjoub, Mohamed Ali
    Contribution à l'inspection des pièces mécaniques souples sans lee recours à des opérations de conformation, by Haj Ibrahim,Marwa.
    Fall 2019

    Co-directed by: Mahjoub, Mohamed Ali
    Contributions au développement d'algorithmes robustes pour l'identification des défauts géométriques de forme à partir d'un nuage de points, by Jbira,Ibtissem.
    Fall 2019

    Co-directed by: Antoni, Jérôme
    Développement d'un outil d'interpolation entre les régimes de fonctionnement d'une turbine hydraulique, by Pham,Quang Hung.
    Fall 2019

    Co-directed by: Antoni, Jérôme
    Identification des caractères du comportement dynamique des roues de turbine hydroélectrique par l'étude des régimes transitoires, by Dollon,Quentin.
    Fall 2019

Projet d'application à 9 crédits

    Développement de méthodologie pour le calcul des incertitudes de mesures pour la photogrammétrie, by Grenier,Denis.
    Summer 2009

Stage industriel à 6 crédits

    Influence de la flexion des rivets sur la vie en fatigue des joints aéronautiques, by Marmont,Hugues.
    Summer 2008

    Internship Report P&WC Sow1593, by Montero Rodriguez,Ramon.
    Summer 2017

    Modernisation du réseau de carburant - Procédures de cadenassage et entretien préventif, by Parent,Pierre.
    Summer 2019

Rapport technique à 6 crédits

    Validation technique et règlementaire d'une application de la vision robotique aux opérations de contrôle de la qualité dans une industrie pharmaceutique, by Pizzera,Nicolas.
    Winter 2010

    Gestion du processus et de l'information d'un département de conception mécanique en entreprise, by Bisaillon,Gaby.
    Winter 2011

    Étude de l'erreur globale obtenue sur des opérations d'ajustement et d'inspection de composants aéronautiques en utilisant des systèmes de métrologie grande échelle, by Massol,Bastien.
    Fall 2012

    Reproductibilité des algorithmes d'identification des zones des tolérences géométriques, by Abderahim Idrissi,Ayoub.
    Fall 2013

    Application de l'algorithme CPD pour l'inspection des pièces souples, by Martin,Simon.
    Winter 2016

    Optimisation du procédé de thermorivetage des attaches "COBRA", by Bastille Rousseau,Etienne.
    Winter 2017

    Analyse de reproductibilité des mesures dimensionnelles et géométriques au niveau industriel, by Boutkedjirt,Mouïz.
    Winter 2018

    Analyse de l'efficacité des opérations des préparateurs de commandes en fonction de la configuration du stockage, by Desnoyers,Éric.
    Summer 2019

Thèse de doctorat ( innovation industrielle)

    Co-directed by: Ruel, Michel
    Contribution au développement d'une méthode de contrôle des procédés dans une usine de bouletage, by Gosselin,Claude.
    Summer 2014

Projet d'intervention en entreprise à 15 crédits

    Co-directed by: Jarkovski, Cédric
    Lancement d'une gamme de services SFR, by Venougobalou,Raman.
    Summer 2011

    Co-directed by: Maranzana, Roland
    Caractérisation des défauts d'ondulation - profil, by Goy,Gérard.
    Fall 2012

    Co-directed by: Beaulac, Pascal
    Optimisation de la cédule du programme CSERIES, by Martin,Antoine.
    Winter 2013

    Co-directed by: Coache, Marc
    Mise sur pied et implémentation des standards pour la gestion des processus techniques chez Andritz Hydro Canada Inc. en s'appuyant sur la norme du PMI, by Youseu Tchitchoua,Emalor Fabrice.
    Winter 2014

    Co-directed by: Rioux, Michel
    Mise en place d'un processus de traitement d'une lettre de divulgation, by Diagne,Aida.
    Fall 2013

    Co-directed by: Munaux, Olivier
    Caractéristiques et calcul de la capabilité du procédé AFP en traitement en ligne, by Baeni,Francis.
    Fall 2016

    Co-directed by: Kamali Nejad, Mojtaba
    Analyse de l'impact d'un outil «ogive» ou «fly-cutter» sur le défaut de forme d'une surface usinée et sa tolérance de profil, by Aberbour,Nabil.
    Winter 2019

    Co-directed by: Forget, Francis
    Implantation d'un logiciel de gestion des processus de fabrication, amélioration continue en industrie 4.0, by Mouzayek Kouz,Juliette.
    Fall 2019

Projet d'application à 15 crédits

    La mesure de la complexité dans les systèmes d'ingénierie dans un contexte de développement d'un nouveau produit (NPD), by Tortato,Roberta Cristina.
    Summer 2014

    Mise en place d'un système de management de l'environnement et santé sécurité au travail selon les normes ISO 14001 et OHSAS18001, by Ben Haj,Hassine.
    Summer 2016

    Analyse de reproductibilité des mesures dimensionnelles et géométriques au niveau industriel, by Ababsa,Abdelaaziz.
    Summer 2018

Publications
Conference report (60)

Q. Chatenet, M. Gagnon, L. Tôn-Thât, M. Fouladirad, E. Remy, A. S. Tahan. 2019. « Stochastic modelling of cavitation erosion in Francis runner ». 29th IAHR Symposium on Hydraulic Machinery and Systems (Kyoto, Japan, Sept. 17-21, 2018) UK : IOP Publishing.

Olivier Blancke, Dragan Komljenovic, Antoine Tahan, Normand Amyot, Claude Hudon, Jean-François Boudreau, Mélanie Lévesque. 2018. « From data to asset health management in the context of hydropower generation: A holistic concept ». 2018 World Congress of Engineering Asset Management (WCEAM) (Stavanger, Norway, Sept. 24-27, 2018)

M. Nassar, L. Guizani, M. -J. Nollet, A. Tahan. 2018. « Approche probabiliste pour évaluer la fiabilité des ponts isolés à la base, sous l’effet simultané des séismes et de la température en régions froides ». 25e Colloque sur la progression de la recherche québécoise sur les ouvrages d’art (Montréal, QC, Canada, 8-9 mai 2018)

Ibtissem Jbira, Antoine Tahan, Mohammed Ali Mahjoub, Borhen Louhichi. 2018. « Evaluation of the algorithmic error of new specification tools for an ISO 14405-1:2016 size ». ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (Québec, QC, Canada, Aug. 26-29, 2018)

Philippe Cambron, Christian Masson, Antoine Tahan, David Torres, Francis Pelletier. 2017. « Comparison of power curve monitoring methods ». International Conference on Advances in Energy Systems and Environmental Engineering (ASEE 2017) (Wroclaw, Poland, July 02-05, 2017) EDP Sciences.

M. Berdal, S-A. Tahan, M. Gagnon. 2016. « Maintenance strategy in fatigue based on the Hasofer Lind reliability index ». 11th International Conference on Modeling, Optimization & Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

Olivier Blancke, Antoine Tahan, Dragan Komljenovic, Normand Amyot, Claude Hudon, Melanie Lévesque. 2016. « A hydrogenerator model-based failure detection framework to support asset management ». 2016 IEEE International Conference on Prognostics and Health Management (ICPHM) (Ottawa, ON, Canada, June 20-22, 2016) Piscataway, NJ, USA : IEEE.

Fatemeh Aghazadeh, M. Thomas, A. Tahan. 2016. « Effect of varying cutting parameters on the accuracy of tool wear monitoring in milling process ». CMVA Conference : Covering the Spectrum: From Fundamentals to Future Trends (Toronto, ON, Canada, Oct. 26-28, 2016)

Mourad Kedadouche, Marc Thomas, Antoine Tahan. 2016. « Empirical mode decomposition combined with empirical wavelets for extracting bearing frequencies in a noisy environment and early detection of defects ». Advances in Condition Monitoring of Machinery in Non-Stationary Operations: Proceedings of the Fourth International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO'2014, Lyon, France December 15-17 (Lyon, France, Dec. 15-17, 2014) p. 151-165. Springer International Publishing.

Ali Aidibe, Mojtaba Kamali Nejad, Antoine Tahan, Mohammad Jahazi, Sylvain G. Cloutier. 2016. « A proposition for new quality 3D indexes to measure surface roughness ». 7th HPC 2016 - CIRP Conference on High Performance Cutting (Chemnitz, Germany, May 31-June 2, 2016) p. 327-330. Elsevier.

Q. Chatenet, A. Tahan, M. Gagnon, J. Chamberland-Lauzon. 2016. « Numerical model validation using experimental data: Application of the area metric on a Francis runner ». 28th IAHR symposium on Hydraulic Machinery and Systems (IAHR2016) (Grenoble, France, July 4-8, 2016) IOP Publishing.

Kaveh Babanezhad, Gilles Foucault, Antoine Tahan, Jean Bigeon. 2016. « A bi-criterion flexible registration method for fixtureless inspection of compliant parts ». 7th HPC 2016 - CIRP Conference on High Performance Cutting (Chemnitz, Germany, May 31-June 2, 2016) p. 307-310. Elsevier.

Antoine Proteau, S.-Antoine Tahan, Roland Maranzana, Pascal Lavoie. 2016. « Proposition d'un modèle d'estimation de la complexité géométrique d'un porduit usine basé sur la maquette 3D ». 11th International Conference on Modeling, Optimization & Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

I. Diagne, M. Gagnon, A. Tahan. 2016. « Modeling the dynamic behavior of turbine runner blades during transients using indirect measurements ». 28th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2016) (Grenoble, France, July 04-08, 2016) UK : IOP Publishing Ltd..

I. Jbira, M. Tlija, B. Louhichi, A. Tahan. 2016. « CAD/Tolerancing integration: mechanical system with geometric defects ». 11th International Conference on Modeling, Optimization & Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

A. Joubair, A. S. Tahan, I. A. Bonev. 2016. « Performances of observability indices for industrial robot calibration ». IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (Daejeon, South Korea, Oct. 09-14, 2016) p. 2477-2484. IEEE.

Olivier Blancke, Normand Amyot, Claude Hudon, Mélanie Lévesque, Antoine Tahan. 2015. « A new generic approach to convert FMEA in causal trees for the purpose of hydro-generator rotor failure mechanisms identification ». Annual Conference of the Prognostics and Health Management Society 2015 (Coronado, CA, USA, Oct. 18-24, 2015) PHM Society.

H. H. Boukani, S. M. Chentouf, Martin Viens, S.-Antoine Tahan, M. Gagnon. 2015. « The effect of martensitic stainless steel microstructure on the ultrasonic inspection of turbine runner joints ». AIP Conference Proceedings (Boise, ID, USA, July 20-25, 2014) p. 909-916. USA : AIP - American Institute of Physics.

Mourad Kedadouche, Marc Thomas, Antoine Tahan, Raynald Guilbault. 2015. « Monitoring gears by vibration measurements: Lempel-Ziv complexity and approximate entropy as diagnostic tools ». 4th Colloque Experimental Vibration Analysis, AVE 2014, November 18, 2014 - November 20, 2014 (Blois, France, Nov. 18-20, 2014) EDP Sciences.

Ali Aidibe, Antoine Tahan. 2015. « The Coherent Point Drift algorithm adapted for fixtureless metrology of non-rigid parts ». 13th CIRP Conference on Computer Aided Tolerancing, CAT 2014, May 11, 2014 - May 14, 2014 (Hangzhou, China, May 11-14, 2014) p. 84-89. Elsevier.

Sasan Sattarpanah Karganroudi, Jean-Christophe Cuillière, Vincent Francois, Souheil-Antoine Tahan. 2015. « An improvement of fixtureless inspection for non-rigid parts based on filtering sample points ». 25th Canadian Congress of Applied Mechanics (London, ON, Canada, May 31 - June 4, 2015)

H. H. Boukani, Martin Viens, S.-Antoine Tahan, M. Gagnon. 2014. « On the performance of nondestructive testing methods in the hydroelectric turbine industry ». 27th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2014) (Montreal, QC, Canada, Sept. 22-26, 2014) IOP Publishing.

Mourad Kedadouche, Marc Thomas, Antoine Tahan. 2014. « Empirical mode decomposition of acoustic emission for early detection of bearing defects ». Advances in Condition Monitoring of Machinery in Non-Stationary Operations : Proceedings of the third International Conference on Condition Monitoring of Machinery in Non-Stationary Operations CMMNO 2013 (Ferrara, Italy, ) p. 367-377. Springer Berlin Heidelberg.

H. Khakpour, L. Birglenl, S.-Antoine Tahan, F. Paquet. 2014. « Experimental study on abrasive waterjet polishing of hydraulic turbine blades ». 27th IAHR Symposium on Hydraulic Machinery and Systems, IAHR 2014 (Montreal, QC, Canada, Sept. 22-26, 2014) Institute of Physics Publishing.

G. N. Abenhaim, A. Desrochers, Antoine S. Tahan. 2013. « An Investigation of the Repeatability of Nonrigid Parts Measurements: A Case Study of an Aluminum Panel ». 12th CIRP Conference on Computer Aided Tolerancing p. 105-111.

Gad N. Abenhaim, S. Antoine Tahan, Alain Desrochers, Jean-Francois Lalonde. 2013. « Aerospace panels fixtureless inspection methods with restraining force requirements; A technology review ». SAE 2013 AeroTech Congress and Exhibition (AEROTECH) (Montreal, QC, Canada, Sept. 24-26, 2013) Warrendale, PA, USA : SAE International.

Mourad Kedadouche, Thameur Kidar, Marc Thomas, Antoine Tahan, Mohamed El Badaoui, Raynald Guilbault. 2013. « Combining EMD and Lempel-Ziv complexity for early detection of gear cracks ». Surveillance 7 : international conference : October 29-30, 2013, Chartres, France (Chartres, France, Oct. 29-30, 2013) Chartres, France : Institute of Technology.

Mourad Kedadouche, Marc Thomas, Antoine Tahan. 2013. « Cyclostationarity applied to acoustic emission and development of a new indicator for monitoring bearing defects ». CIRI 2013, 3ème Congrès International sur l’Ingénierie des Risques Industriels (Reims, France, July 3-5, 2013) Reims, France : Université de Reims Champagne-Ardenne.

Ali Aidibe, Antoine Tahan. 2013. « Curvature estimation for metrology of non-rigid parts ». ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference (MSEC) (Madison, WI, USA, June 10-14, 2013) New York, N.Y., USA : American Society of Mechanical Engineers.

Ali Aidibe, S. Antoine Tahan, Jean-Francois Lalonde. 2013. « A robust iterative displacement inspection algorithm for quality control of aerospace non-rigid parts without conformation jig ». SAE 2013 AeroTech Congress and Exhibition (AEROTECH) (Montreal, QC, Canada, Sept. 24-26, 2013) Warrendale, PA, USA : SAE International.

Ali Aidibe, S.-Antoine Tahan. 2013. « An inspection approach for nonrigid mechanical parts ». Manufacturing Science and Technology (ICMST2013) (Dubai, United Arab Emirates, Aug. 3-4, 2013) p. 806-811. Zurich-Durnten, Switzerland : Trans Tech Publications Ltd.

M. Gagnon, Antoine Tahan, Philippe Bocher, D. Thibault. 2013. « On the fatigue reliability of hydroelectric Francis runners ». 5th International Conference on Fatigue Design, Fatigue Design 2013 (Senlis, France, Nov. 27-28, 2013) p. 565-574.

V. Sabri, S.-Antoine Tahan, X. T. Pham, H. Radvar-Esfahlan, B. Louhichi, A. M. Tahvilian. 2013. « Fixtureless profile inspection of non-rigid parts ». Proceedings of International Conference on Computers and Industrial Engineering, CIE (Hong Kong, China, Oct. 16-18, 2013) p. 86-97. Curran Associates Inc..

J. Arpin-Pont, M. Gagnon, Antoine Tahan, A. Coutu, D. Thibault. 2012. « Strain gauge measurement uncertainties on hydraulic turbine runner blade ». 26th IAHR Symposium on Hydraulic Machinery and Systems (Beijing, China, Aug. 19-23, 2012) UK : IOP Publishing Ltd..

M. Poirier, Antoine Tahan, M. Gagnon, A. Coutu. 2012. « Extrapolation des signaux de chargement mesurés sur des aubes de turbine hydroélectrique de type Francis  ». 30th Canadian Machinery Vibration Association (CMVA) (Niagara Falls, ON, Canada, Oct. 24-26, 2012) The Canadian Machinery Vibration Association.

M. Gagnon, Antoine Tahan, Philippe Bocher, D. Thibault. 2012. « The role of high cycle fatigue (HCF) onset in Francis runner reliability ». 26th IAHR Symposium on Hydraulic Machinery and Systems (Beijing, China, Aug. 19-23, 2012) UK : IOP Publishing Ltd..

Marc Thomas, Antoine Tahan, M. Kedadouche. 2012. « Comparison of acoustic emission and vibration measurements for early detection of bearing damages ». Research and Innovation for Transport Systems of the Future (RITF) (Paris, France, Nov. 15, 2012)

René Kamguem, Antoine Tahan, Bernard Wenga, Victor Songmene. 2012. « Non-contact Optical inspection of machined parts Surface Roughness ». 1st International Conference on Virtual Machining Process Technology (VMPT) (Montréal, Québec, Canada, 28 mai au 1er juin 2012)

M. Kedadouche, Marc Thomas, Antoine Tahan. 2012. « Monitoring bearings by acoustic emission: a comparative study with vibration techniques for early detection ». 30th Canadian Machinery Vibration Association (CMVA) (Niagara Falls, ON, Canada, Oct. 24-26, 2012) The Canadian Machinery Vibration Association.

A. Aidibe, Antoine Tahan, G. N. Abenhaim. 2011. « Dimensioning control of non-rigid parts using the Iterative Displacement Inspection with the maximum normed residual test ». 2nd International Conference on Fluid Mechanics and Heat and Mass Transfer (FLUIDSHEAT'11), 2nd International Conference on Theoretical and Applied Mechanics (TAM'11), 4th WSEAS International Conference on UPT'11 (CUHT'11) (Corfu Island, Greece, July 15-17, 2011) p. 13-18. Corfu Island, Greece : World Scientific and Engineering Academy and Society.

Jean-François Chatelain, J. F. Lalonde, Antoine Tahan. 2011. « A comparison of the distortion of machined parts resulting from residual stresses within workpieces ». 4th International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS) (Barcelona, Spain, Sept. 15-17, 2011) p. 79-84. World Scientific and Engineering Academy and Society.

Hassan Radvar-Esfahlan, Antoine Tahan. 2011. « Distance preserving dimensionality reduction methods and their applications in geometric inspection of nonrigid parts ». 5th symposium on Advances in Science and Technology (Mashhad, Iran, May 12-17, 2011)

Antoine Tahan, Denis Thibault, Luc Marcouiller, Martin Gagnon, Mickael Szczota. 2011. « Modeling operation history of hydroelectric turbines  ». The HydroVision International Conference (Sacramento, CA, USA, July 19-22, 2011)

René Kamguem, Victor Songmene, Jean-Pierre Kenné, Antoine Tahan. 2011. « Surface quality of 7075-T6 aluminum alloy machined using high-speed milling process ». Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, Canada, Oct. 2-5, 2011) p. 495-508. Westmount : MetSoc.

Hassan Radvar-Esfahlan, Antoine Tahan. 2010. « Nonrigid geometric inspection using intrinsic geometry ». Proceedings of the Canadian Society of Mechanical Engineering Forum (Victoria, B.C., Canada, June 7-9, 2010)

Martin Gagnon, Antoine Tahan, Philippe Bocher, Denis Thibault. 2010. « Impact of startup scheme on Francis runner life expectancy ». 25th IAHR Symposium on Hydraulic Machinery and Systems (Timisoara, Romania, 20–24 Sept. 2010) p. 12107. London, UK : Institute of Physics Publishing.

Claude Gosselin, Antoine Tahan, Michel Ruel, Mathieu Desnoyers. 2010. « Simplified approach for monitoring the performance of multivariable processes ». Proceedings of the 2nd International Congress of Automation in the Mining Industry (Santiago, Chile, Nov. 10-12, 2010)

Virgilio Quintana, Louis Rivest, Robert Pellerin, Antoine Tahan, Frédérick Venne. 2009. « From fully dimensioned 2D drawings to reduced dimensioning 3D model-based definition ». Proceedings of the International Conference on Product Lifecycle Management : Supporting the Extended Enterprise (Bath, United Kingdom, July 6-9, 2009) p. 539-548. Geneve, Switzerland : Inderscience Enterprise Ltd.

Antoine Tahan, Sylvain Levesque. 2009. « Exploiting the process capability of position geometric tolerance according GD & T ASME Y14.5M ». International Conference on Computers and Industrial Engineering (CIE) (Troyes, France, July 6-9, 2009) p. 1267-1272. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.

Antoine Tahan, Sylvain Levesque. 2009. « Exploiting the process capability of profile tolerance according GD&T ASME-Y14.5M ». International Conference on Computers and Industrial Engineering (CIE) (Troyes, France, July 6-9, 2009) p. 1285-1290. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.

G.N. Abenhaïm, Antoine Tahan, Roland Maranzana. 2008. « Nouveau algorithme pour l'inspection des coques flexibles par déplacement itératif ». 2e Sommet Québec-Aquitaine-Midi-Pyrénées sur l'Usinage Haute Performance : Colloque sur l'Usinage à Sec (Montréal, QC, Canada, 3-5 mars 2008)

F. Pelletier, Christian Masson, Antoine Tahan. 2008. « Power performance evaluation and improvement of operational wind power plant ». OSIsoft Wind Power User Group Meeting (Chicago, IL, USA, June 4, 2008)

L. Lacasse, Antoine Tahan, Zhaoheng Liu. 2007. « Automatic characterization of wood board surface defects ». 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montreal, Canada, June 11-13, 2007) Montréal, Qué., Canada : École de technologie supérieure.

G. Corriveau, Raynald Guilbault, Antoine Tahan. 2007. « Genetic algorithms and finite element coupling for mechanical optimization ». 10th International Conference on Optimum Design in Engineering (OPTI) (Myrtle Beach, USA, May 7- 9, 2007) p. 87-96. Southampton, UK : WITPress.

G. Corriveau, Raynald Guilbault, Antoine Tahan. 2007. « Optimisation d'une turbine hydroélectrique par algorithmes génétiques ». 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montréal, Canada, June 11-13, 2007) Montréal, Qué., Canada : École de technologie supérieure.

Antoine Tahan, Zhaoheng Liu, L. Lacasse. 2007. « New method for characterization of wood ». 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montreal, Canada, June 11-13, 2007) Montréal, Qué., Canada : École de technologie supérieure.

J.P. Michaud, Victor Songmene, Antoine Tahan. 2006. « Aluminium alloy 7050 T7451 thin wall high-speed machining parts study ». 3th International Symposium on Aerospace Materials and Manufacturing Processes: Emerging Materials, Manufacturing, and Repair Techniques (Montreal, QC, Canada, Oct. 2-4, 2006) Canada : The Metallurgy and Materials Society.

Martin Gagnon, Antoine Tahan, André Coutu, Marc Thomas. 2006. « Analyse modale opérationnelle en présence d'excitations harmoniques : étude de cas sur des composantes de turbine hydroélectrique ». Compte rendu 24ième séminaire sur la vibration des machines : ACVM, 25-27 octobre 2006 (Montréal, QC, Canada, 25-27 oct. 2006) p. 320-329. Calgary, Canada : ACVM.

S. A. Tahan, I. Kamwa, P. Viarouge, M. Ferfra. 1993. « A generalized model of satured synchronous machines ». Computational aspects of electromechanical energy converters and drives, 7-8-9 July 1993 : proceedings [of the the] 4th international conference = La modelisation en simulation des machines electriques et des convertisseurs statiques, 7-8-9 Juillet 1993 : (Montreal, QC, Canada, July 7-9, 1993) p. 585-590. International Association for Mathematics and Computers in Simulation.

S. A. Tahan, I. Kamwa, P. Viarouge, M. Ferfra, H. Le-Huy. 1993. « Identification of solid-rotor asynchronous-machine parameters from standstill tests in the time domain using nonlinear techniques ». Computational aspects of electromechanical energy converters and drives, 7-8-9 July 1993 : proceedings [of the the] 4th international conference = La modelisation en simulation des machines electriques et des convertisseurs statiques, 7-8-9 Juillet 1993 : (Montreal, QC, Canada, July 7-9, 1993) p. 603-608. International Association for Mathematics and Computers in Simulation.

Peer-reviewed article published in a refereed journal (68)

Kaveh Babanezhad, Gilles Foucault, Vahid Sabri, Antoine Tahan, Jean Bigeon. 2019. « The fixtureless inspection of flexible parts based on semi-geodesic distance ». Precision Engineering. vol. 59 p. 174-184.

Mohamad Nassar, Lotfi Guizani, Marie-José Nollet, Antoine Tahan. 2019. « A probability-based reliability assessment approach of seismic base-isolated bridges in cold regions ». Engineering Structures. vol. 197

Mounia Berdai, Antoine Tahan, Martin Gagnon. 2019. « Reproducibility investigation of elicitation techniques in risk assessment for hydraulic turbines ». Journal of Risk Research. (In press)

Antoine Proteau, Antoine Tahan, Marc Thomas. 2019. « Specific cutting energy: a physical measurement for representing tool wear ». International Journal of Advanced Manufacturing Technology. 10 p. (In press)

Marwa Haj Ibrahim, Ali Aidibe, Mohamed Ali Mahjoub, Antoine Tahan, Borhen Louhichi. 2019. « A novel approach to the inspection of deformable bodies by adapting the coherent point drift algorithm and using a clustering methodology ». International Journal of Advanced Manufacturing Technology. 14 p. (In press)

Olivier Blancke, Amélie Combette, Normand Amyot, Dragan Komljenovic, Mélanie Lévesque, Claude Hudon, Antoine Tahan, Noureddine Zerhouni. 2018. « A predictive maintenance approach for complex equipment based on petri net failure mechanism propagation model ». Proceedings of the European Conference of the PHM Society. vol. 4 , nº 1. 12 p.

Fatemeh Aghazadeh, Antoine Tahan, Marc Thomas. 2018. « Tool condition monitoring using spectral subtraction algorithm and artificial intelligence methods in milling process ». International Journal of Mechanical Engineering and Robotics Research. vol. 7 , nº 1. p. 30-34.

Fatemeh Aghazadeh, Antoine Tahan, Marc Thomas. 2018. « Tool condition monitoring using spectral subtraction and convolutional neural networks in milling process ». International Journal of Advanced Manufacturing Technology. vol. 98 , nº 9-12. p. 3217-3227.

Olivier Blancke, Antoine Tahan, Dragan Komljenovic, Normand Amyot, Mélanie Lévesque, Claude Hudon. 2018. « A holistic multi-failure mode prognosis approach for complex equipment ». Reliability Engineering and System Safety. vol. 180 p. 136-151.

P. Cambron, C. Masson, A. Tahan, F. Pelletier. 2018. « Control chart monitoring of wind turbine generators using the statistical inertia of a wind farm average ». Renewable Energy. vol. 116 , nº B. 11 p. p. 88-98.

Mounia Berdai, Antoine Tahan, Martin Gagnon. 2018. « A comparison between aggregation before and after propagation based on a reliability model ». Information Sciences. vol. 453 p. 99-110.

Alexandre Filion, Ahmed Joubair, Antoine S. Tahan, Ilian A. Bonev. 2018. « Robot calibration using a portable photogrammetry system ». Robotics and Computer-Integrated Manufacturing. vol. 49 p. 1339-1351.

Sasan Sattarpanah Karganroudi, Jean-Christophe Cuillière, Vincent François, Souheil-Antoine Tahan. 2018. « “What-if” scenarios towards virtual assembly-state mounting for non-rigid parts inspection using permissible loads ». International Journal of Advanced Manufacturing Technology. vol. 97 , nº 1-4. p. 353-373.

Hamid Habibzadeh Boukani, Martin Viens, Souheil-Antoine Tahan, Martin Gagnon. 2018. « Case study on the integrity and nondestructive inspection of flux-cored arc welded joints of Francis turbine runners ». International Journal of Advanced Manufacturing Technology. vol. 98 , nº 5-8. p. 2201-2211.

Floriane Zongo, Antoine Tahan, Ali Aidibe, Vladimir Brailovski. 2018. « Intra- and inter-repeatability of profile deviations of an AlSi10Mg tooling component manufactured by laser powder bed fusion ». Journal of Manufacturing and Materials Processing. vol. 2 , nº 3. 14 p.

Ali Aidibe, Mojtaba Kamali Nejad, Antoine Tahan, Mohammad Jahazi, Sylvain G. Cloutier. 2017. « Surface characterization of die inserts used for LED lamp plastic lenses ». International Journal of Advanced Manufacturing Technology. vol. 88 , nº 9-12. 9 p. p. 3395-3403.

Philippe Cambron, Antoine Tahan, Christian Masson, Francis Pelletier. 2017. « Bearing temperature monitoring of a Wind Turbine using physics-based model ». Journal of Quality in Maintenance Engineering. vol. 23 , nº 4. p. 479-488.

Marc Poirier, Martin Gagnon, Antoine Tahan, André Coutu, Joël Chamberland-lauzon. 2017. « Extrapolation of dynamic load behaviour on hydroelectric turbine blades with cyclostationary modelling ». Mechanical Systems and Signal Processing. vol. 82 p. 193-205.

V. Sabri, S. Sattarpanah, S. A. Tahan, J. C. Cuillière, V. François, X. T. Pham. 2017. « A robust and automated FE-based method for fixtureless dimensional metrology of non-rigid parts using an improved numerical inspection fixture ». International Journal of Advanced Manufacturing Technology. vol. 92 , nº 5-8. p. 2411-2423.

Heithem Touazine, Jordan Akab, Mohammad Jahazi, Antoine Tahan, Walid Jomaa, Philippe Bocher. 2017. « Modeling of the microstructure alteration induced by hard turning of Inconel 718 ». International Journal of Advanced Manufacturing Technology. vol. 93 , nº 9-12. 8 p. p. 3705-3712.

I. Jbira, M. Tlija, B. Louhichi, A. Tahan. 2017. « CAD/Tolerancing integration: Mechanical assembly with form defects ». Advances in Engineering Software. vol. 114 13 p. p. 312-324.

Sasan Sattarpanah Karganroudi, Jean-Christophe Cuillière, Vincent François, Antoine Souheil Tahan. 2017. « Assessment of the robustness of a fixtureless inspection method for non-rigid parts based on a verification and validation approach ». Journal of Verification, Validation and Uncertainty Quantification. vol. 2 , nº 4. 22 p.

P. Cambron, R. Lepvrier, C. Masson, A. Tahan, F. Pelletier. 2016. « Power curve monitoring using weighted moving average control charts ». Renewable Energy. vol. 94 p. 126-135.

Ali Aidibe, Antoine Tahan, Vladimir Brailovski. 2016. « Metrological investigation of a selective laser melting additive manufacturing system: A case study ». IFAC-PapersOnLine. vol. 49 , nº 31. p. 25-29.

Marc Jr. Lépine, Antoine S. Tahan. 2016. « The relationship between geometrical complexity and process capability ». Journal of Manufacturing Science and Engineering. vol. 138 , nº 5. 13 p.

Francis Pelletier, Christian Masson, Antoine Tahan. 2016. « Wind turbine power curve modelling using artificial neural network ». Renewable Energy. vol. 89 p. 207-214.

Mounia Berdai, Antoine Tahan, Martin Gagnon. 2016. « Imprecise probabilities in fatigue reliability assessment of hydraulic turbines ». ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering. vol. 3 , nº 1. 8 p.

Guillaume Corriveau, Raynald Guilbault, Antoine Tahan, Robert Sabourin. 2016. « Bayesian network as an adaptive parameter setting approach for genetic algorithms ». Complex & Intelligent Systems. vol. 2 , nº 1. p. 1-22.

V. Sabri, S. A. Tahan, X. T. Pham, D. Moreau, S. Galibois. 2016. « Fixtureless profile inspection of non-rigid parts using the numerical inspection fixture with improved definition of displacement boundary conditions ». International Journal of Advanced Manufacturing Technology. vol. 82 , nº 5-8. p. 1343-1352.

Sasan Sattarpanah Karganroudi, Jean-Christophe Cuillière, Vincent Francois, Souheil-Antoine Tahan. 2016. « Automatic fixtureless inspection of non-rigid parts based on filtering registration points ». International Journal of Advanced Manufacturing Technology. vol. 87 , nº 1. p. 687-712.

M. Kedadouche, M. Thomas, A. Tahan. 2016. « A comparative study between empirical wavelet transforms and empirical mode decomposition methods: application to bearing defect diagnosis ». Mechanical Systems and Signal Processing. vol. 81 p. 88-107.

Gad N. Abenhaim, Alain Desrochers, Antoine S. Tahan, Jean Bigeon. 2015. « A finite-element boundary condition setting method for the virtual mounting of compliant components ». Journal of Computing and Information Science in Engineering. vol. 15 , nº 4. 8 p.

Gad N. Abenhaim, Alain Desrochers, S.-Antoine Tahan, Jean Bigeon. 2015. « A virtual fixture using a FE-based transformation model embedded into a constrained optimization for the dimensional inspection of nonrigid parts ». CAD Computer Aided Design. vol. 62 p. 248-258.

Mourad Kedadouche, Marc Thomas, Antoine Tahan. 2015. « A hybrid method combining Teager Kaiser energy operator, empirical mode decomposition and minimum entropy deconvolution for monitoring gears damages ». Mechanics and Industry. vol. 16 , nº 6. 15 p.

Mourad Kedadouche, Marc Thomas, Antoine Tahan, Raynald Guilbault. 2015. « Nonlinear parameters for monitoring gear: comparison between lempel-ziv, approximate entropy, and sample entropy complexity ». Shock and Vibration. vol. 2015 12 p.

Hamed Khakpour, Lionel Birglen, Souheil-Antoine Tahan. 2015. « Analysis and optimization of a new differentially driven cable parallel robot ». Journal of Mechanisms and Robotics. vol. 7 , nº 3. 6 p.

Ali Aidibe, S.-Antoine Tahan. 2015. « Adapting the coherent point drift algorithm to the fixtureless dimensional inspection of compliant parts ». International Journal of Advanced Manufacturing Technology. vol. 79 , nº 5. p. 831-841.

Hamed Khakpour, Lionel Birglen, Souheil-Antoine Tahan. 2015. « Uniform scanning path generation for abrasive waterjet polishing of free-form surfaces modeled by triangulated meshes ». International Journal of Advanced Manufacturing Technology. vol. 77 , nº 5. p. 1167-1176.

Jérémy Arpin-Pont, Martin Gagnon, S.-Antoine Tahan, André Coutu, Denis Thibault. 2015. « Methodology for estimating strain gauge measurement biases and uncertainties on isotropic materials ». Journal of Strain Analysis for Engineering Design. vol. 50 , nº 1. p. 40-50.

Borhen Louhichi, Gad N. Abenhaim, Antoine S. Tahan. 2015. « CAD/CAE integration: updating the CAD model after a FEM analysis ». International Journal of Advanced Manufacturing Technology. vol. 76 , nº 1. p. 391-400.

H. Khakpour, L. Birglen, S.-Antoine Tahan. 2014. « Synthesis of differentially driven planar cable parallel manipulators ». IEEE Transactions on Robotics. vol. 30 , nº 3. p. 619-630.

Ali Aidibe, Antoine Tahan. 2014. « The inspection of deformable bodies using curvature estimation and Thompson-Biweight test ». International Journal of Advanced Manufacturing Technology. vol. 71 , nº 9-12. p. 1733-1747.

Borhen Louhichi, Mehdi Tlija, Abdelmajid Benamara, Antoine Tahan. 2014. « An algorithm for CAD tolerancing integration: Generation of assembly configurations according to dimensional and geometrical tolerances ». CAD Computer Aided Design. vol. 62 p. 259-274.

Hassan Radvar-Esfahlan, S.-Antoine Tahan. 2014. « Robust generalized numerical inspection fixture for the metrology of compliant mechanical parts ». International Journal of Advanced Manufacturing Technology. vol. 70 , nº 5-8. p. 1101-1112.

Martin Gagnon, Antoine Tahan, Philippe Bocher, Denis Thibault. 2014. « Influence of load spectrum assumptions on the expected reliability of hydroelectric turbines: A case study ». Structural Safety. vol. 50 p. 1-8.

R. Kamguem, S.-Antoine Tahan, Victor Songmene. 2014. « Surface roughness estimation of turned parts from optical image measurements and wavelet decomposition ». International Journal of Materials Forming and Machining Processes. vol. 1 , nº 1. p. 48-72.

M. Kedadouche, M. Thomas, A. Tahan. 2014. « Cyclostationarity applied to acoustic emission and development of a new indicator for monitoring bearing defects ». Mechanics & Industry. vol. 15 , nº 6. p. 467-476.

M. Kedadouche, Marc Thomas, Antoine Tahan. 2014. « Monitoring machines by using a hybrid method combining MED, EMD, and TKEO ». Advances in Acoustics and Vibration. vol. 2014

Guillaume Corriveau, Raynald Guilbault, Antoine Tahan, Robert Sabourin. 2013. « Review of phenotypic diversity formulations for diagnostic tool ». Applied Soft Computing. vol. 13 , nº 1. p. 9-26.

B. Danouj, S.-Antoine Tahan, Éric David. 2013. « Using a new generation of piezoelectric sensors for partial discharge detection ». Measurement. vol. 46 , nº 1. p. 660-666.

H. Radvar-Esfahlan, S.-Antoine Tahan. 2013. « Performance study of dimensionality reduction methods for metrology of nonrigid mechanical parts ». International Journal of Metrology and Quality Engineering. vol. 4 , nº 3. p. 193-200.

Martin Gagnon, Antoine Tahan, Philippe Bocher, Denis Thibault. 2013. « A probabilistic model for the onset of High Cycle Fatigue (HCF) crack propagation: Application to hydroelectric turbine runner ». International Journal of Fatigue. vol. 47 p. 300-307.

Rene Kamguem, Souheil Antoine Tahan, Victor Songmene. 2013. « Evaluation of machined part surface roughness using image texture gradient factor ». International Journal of Precision Engineering and Manufacturing. vol. 14 , nº 2. p. 183-190.

Gad Noriel Abenhaim, Alain Desrochers, Antoine Tahan. 2012. « Nonrigid parts' specification and inspection methods: notions, challenges, and recent advancements ». International Journal of Advanced Manufacturing Technology. vol. 63 , nº 5-8. p. 741-752.

Ali Aidibe, Antoine S. Tahan, Gad N. Abenhaim. 2012. « Distinguishing profile deviations from a part's deformation using the maximum normed residual test ». WSEAS Transactions on Applied and Theoretical Mechanics. vol. 7 , nº 1. p. 18-28.

Jean-François Chatelain, Jean-François Lalonde, Antoine S. Tahan. 2012. « Effect of Residual Stresses Embedded within Workpieces on the Distortion of Parts after Machining ». International Journal of Mechanics. vol. 6 , nº 1. p. 43-51.

Guillaume Corriveau, Raynald Guilbault, Antoine Tahan, Robert Sabourin. 2012. « Review and study of genotypic diversity measures for real-coded representations ». IEEE Transactions on Evolutionary Computation. vol. 16 , nº 5. p. 695-710.

Hassan Radvar-Esfahlan, Souheil-Antoine Tahan. 2012. « Nonrigid geometric metrology using generalized numerical inspection fixtures ». Precision Engineering. vol. 36 , nº 1. p. 1-9.

Martin Gagnon, Antoine Tahan, Philippe Bocher, Denis Thibault. 2012. « On the stochastic simulation of hydroelectric turbine blades transient response ». Mechanical Systems and Signal Processing. vol. 32 p. 178-187.

A. S. Tahan, J. Cauvier. 2012. « Capability estimation of geometrical tolerance with a material modifier by a Hasofer-Lind index ». Journal of Manufacturing Science and Engineering. vol. 134 , nº 2.

René Kamguem, Victor Songmene, Jean-Pierre Kenné, Souheil Antoine Tahan. 2012. « Vision-based surface roughness inspection of machined aluminium parts ». International Journal of Machining and Machinability of Materials. vol. 12 , nº 3. p. 215-235.

Gad N. Abenhaim, Antoine Tahan, Alain Desrochers, Roland Maranzana. 2011. « A novel approach for the inspection of flexible parts without the use of special fixtures ». Journal of Manufacturing Science and Engineering. vol. 133 , nº 1. 11 p. p. 011009-0110011.

Antoine S. Tahan, Sylvain Levesque. 2011. « Exploiting the process capability in the statistical estimation of the tolerance of location ». Mécanique & Industries. vol. 12 , nº 6. p. 503-512.

Guillaume Corriveau, Raynald Guilbault, Antoine Tahan. 2010. « Genetic algorithms and finite element coupling for mechanical optimization ». Advances in Engineering Software. vol. 41 , nº 3. 5 p. p. 422-426.

Martin Gagnon, Antoine Tahan, André Coutu. 2009. « Uncertainty in operational modal analysis of hydraulic turbine components ». International Journal of Fluid Machinery and Systems. vol. 2 , nº 4. p. 278-285.

Louis Lacasse, Antoine Tahan, Zhaoheng Liu. 2008. « Robust method for the automatic characterization of a wooden board's geometrical state ». Quality Engineering. vol. 20 , nº 2. p. 221-231.

J. P. Castonguay, A. S. Tahan. 2005. « Correlated characteristics identification and effect in statistical tolerance design ». WSEAS Transactions on Mathematics. vol. 4 , nº 4. p. 319-326.

Jean-François Chatelain, Y. Boutin, Françoise Marchand, Antoine Tahan. 2004. « Productivity assessment from advanced integration of canned cycles to CAD/CAM software ». WSEAS Transactions on Systems. vol. 3 , nº 3. p. 1187-92.

Poster (4)

Jérémy Montlahuc, Louis Rivest, Jean-Philippe Pernot, Antoine Tahan, Arnaud Polette. 2019. « Vers une utilisation conjointe de données multi-sources pour la génération et le traitement de nuages de points multicouches de parcelles et d’ouvrages existants : constats et premiers éléments d’analyse ». Poster presented during a conference : 87 e Congrès de l'ACFAS ( Gatineau, QC, Canada, 27-31 mai 2019 )

Valentin Thieulin, Louis Rivest, Antoine Tahan. 2019. « Investigation des performances in situ de la numérisation d’une tuyauterie industrielle par photogrammétrie et lumière structurée ». Poster presented during a conference : 87 e Congrès de l'ACFAS ( Gatineau, QC, Canada, 27-31 mai 2019 )

Sasan Sattarpanah Karganroudi, Jean-Christophe Cuillière, Vincent Francois, Souheil-Antoine Tahan. 2015. « Inspection automatique de pièces flexibles sans gabarit de conformité ». Poster presented during a conference : 22e édition du Concours d’affiches scientifiques de l'Université du Québec à Trois-Rivières (UQTR) ( Trois-Rivières, QC, Canada, 25-26 mars 2015 )

Francis Pelletier, Christian Masson, Antoine Tahan, Martin Jetté. 2010. « Experiment using high-frequency data sampling ». Poster presented during a conference : Windpower Conference and Exhibition ( Dallas, TX, USA, May 23-26, 2010 )

Communication (12)

Sasan Sattarpanah Karganroudi, Jean-Christophe Cuillière, Vincent François, Souheil-Antoine Tahan. 2016. « Modeling and numerical simulation of multi-layered fiber-reinforced materials applied for non-rigid parts deformation during assembly process ». Communication during a conference : 7e colloque québécois sur le développement numérique de produits (CAO/FAO) ( Montréal, QC, Canada, 4 mai 2016 )

R. Kamguem, B. Wenga, Antoine Tahan, V. Songmene. 2012. « Non-contact optical inspection of machined parts surface roughness ». Communication during a conference : International Conference on Virtual Machining Process Technology (VMPT) ( Montreal, QC, Canada, May 28-June 1, 2012 )

N. Beaulieu, Antoine Tahan. 2011. « Le portrait du lean manufacturing au Québec : sondage 2012 ». Communication during a conference : Forum TI-PME 2011 ( Montréal, QC, Canada, 20 avril 2011 )

F. Pelletier, Christian Masson, Antoine Tahan. 2011. « Running advanced analytics using MATLAB and PI system ». Communication during a conference : OSIsoft user conference ( San Francisco, CA, USA, Mar. 28-30, 2011 )

Antoine Tahan. 2011. « Exploiter les études de capabilité ». Communication during a conference : 3e Journée de Métrologie en Aérospatiale ( Montréal, QC, Canada, 28 avril 2011 )

Antoine Tahan. 2011. « La gestion de la qualité : histoire, présent et future ». Communication during a conference : Colloque Annuel de l'Ordre des Ingénieurs du Québec ( Montréal, QC, Canada, 12-13 mai 2011 )

Francis Pelletier, Christian Masson, Antoine Tahan, Martin Jetté. 2010. « Modelling through high frequency data sampling and other advantages ». Communication during a conference : European Wind Energy Conference and Exhibition (EWEC) ( Warsaw, Poland, April 20-23, 2010 )

Marc Potvin, Antoine Tahan. 2010. « Investigation metrology ». Communication during a conference : 3D Imaging Conference and Exposition ( Anaheim, Ca., USA, May 18-20, 2010 )

Antoine Tahan. 2010. « Le rapport de mesure, puis après? ». Communication during a conference : 2ème Journée de la métrologie en aérospatiale (JMA) ( Montréal, Québec, Canada, 11 mars 2010 )

Antoine Tahan. 2009. « La gestion des variations géométriques : le présent et l'avenir ». Communication during a conference : 1ère Journée de la Métrologie en Aérospatiale (JMA) ( Montréal, QC, Canada, 5 mars 2009 )

Antoine Tahan, Victor Songmene, Jean-François Chatelain. 2004. « Case study of the application of statistical tolerances taking account of correlation ». Communication during a conference : International Conference on Computers and Industrial Engineering ( San Francisco, CA, USA, Nov., 2004 )

Souheil-Antoine Tahan, Abdallah El Chebair, John Dickinson. 1991. « Étude théorique de la stabilité des coques cylindriques soumises à un écoulement axial ». Communication during a conference : 59e congrès de l'ACFAS ( Sherbrooke, QC, Canada, 21-24 mai 1991 )

Technical report (1)

Guillaume Corriveau, Raynald Guilbault, Antoine Tahan, R. Sabourin. 2015. « Evaluation of genotypic diversity measurements exploited in real-coded representation ». arXiv. 13 p.

Non-peer-reviewed article published in a journal or magazine (1)

Antoine Tahan. 2012. « Conception et assemblage, un mariage de raison ! ». L’Atout. L’Atout, vol. , nº novembre. p. 16-18.

Book (1)

Nicolas B. Beaulieu, Antoine Tahan. 2011. « Lean manufacturing au Québec : portrait 2010 ». Montréal, Québec, Canada : Manufacturiers et Exportateurs au Québec. 45 p.

Chapter of book (1)

Patrice Seers, P. Terrier, Antoine Tahan, Marc Thomas. 2010. « Case Study : hybrid vehicles : the Honda insight and Toyota Prius : transition towards the automobile of the future? ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics . p. 83-109. Cambridge Scholars Publishing.

Award and distinction