Publications

Emma Alix, Sylvie Nadeau, Jean-Pierre Kenné, Antoine Tahan. 2025 « Les défis du désassemblage à l'ère de l'électrique dans l’industrie automobile ». Affiche présentée lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 05-09 mai 2025)
H. R. Ammar, E. Samuel, F. H. Samuel, E. Elsharkawi, H. W. Doty, V. Songmene. 2025 « Effect of Be, Sr, Mn, Mg, Cr and Si Addition on neutralization and fragmentation of β-Al5SiFe Phase in Al-(6-10) %Si Alloys ». International Journal of Metalcasting
Riadh Azzaz, Mohammad Jahazi, Samira Ebrahimi Kahou, Elmira Moosavi-Khoonsari. 2025 « Prediction of final phosphorus content of steel in a scrap-based electric arc furnace using artificial neural networks ». Metals vol. 15 , nº 1
Lydia Benazzouz, Abdelhalim Loucif, Gary Brionne, Chunping Zhang, Paloma Isabel Gallego, Jean-Benoit Levesque, Naima Boutarek-Zaourar, Mohammad Jahazi. 2025 « Assessing the influence of DSC parameters on accurate determination of liquidus and solidus temperatures of a medium carbon low-alloy steel ». Journal of Phase Equilibria and Diffusion vol. 46 , nº 1. p. 119-132
W. Boniface Awatcha, S. Nadeau, L. Hof. 2025 « Circular Economy in automotive disassembly: Challenges and opportunities for End-of-Life Vehicles ». Canadian Society for Mechanical Engineering 32nd Annual Conference of the CFD Society of Canada Canadian Society of Rheology Symposium (CSME-CFDSC-CSR) (Montréal, QC, Canada, May 25-28, 2025)
Samir Mourad Chentouf, Philippe Grandmont, Mohammad Saadati, Nora Amimer, Mohammad Jahazi. 2025 « Influence of friction-stir-processing parameters on the microstructure and local mechanical properties of an aluminium-6% magnesium-H18 alloy ». Metals vol. 15 , nº 7
Raphaël Côté, Dorian Delbergue, Vincent Demers, Nicole R. Demarquette, Sébastien Charlon, Jérémie Soulestin. 2025 « Influence of process parameters on the occurrence of defects and dimensional properties of green part produced by material extrusion of highly filled polymer ». Progress in Additive Manufacturing vol. 10 , nº 1. p. 409-425
D. Djefour, S. Nadeau, K. Landau. 2025 « Digital Human Modeling for long, and low-volume assembly processes: Gas turbine assembly case study ». Open Journal of Safety Science and Technology
Djoher Djefour, S. Nadeau, K. Landau. 2025 « Analyse des interfaces homme-outil : comprendre les paramètres clés de ces interfaces - étude exploratoire avec un gant de données (VMG30) ». Communication lors de la conférence : Congrès annuel AQHSST (Drummondville, QC, Canada, 21-22 mai 2025)
H. W. Doty, H. R. Ammar, A. M. Samuel, F. H. Samuel, V. Songmene. 2025 « Effect of La and Ce addition on the microstructural characteristics and tensile properties of 220 and 356.1 alloys ». International Journal of Metalcasting
H. W. Doty, H. R. Ammar, A. M. Samuel, V. Songmene, F. H. Samuel. 2025 « Effect of alloy composition, solidification rate, porosity level, grain refining and modification on the performance of aluminum-based alloys ». Journal of Materials Engineering and Performance
H. W. Doty, J. Hernandez-Sandoval, H. R. Ammar, V. Songmene, F. H. Samuel. 2025 « Determination of Young's modulus in aluminum alloys: Role of precipitates, dispersoids, and intermetallics ». Journal of Materials Research and Technology vol. 37. p. 3549-3562
H. W. Doty, E. Samuel, A. M. Samuel, E. Elsharkawi, V. Songmene, F. H. Samuel. 2025 « Effect of mischmetal concentration and superheating on the microstructure and tensile properties A319.1: Role of Fe content ». Journal of Materials Research and Technology vol. 35. p. 51-66
Herbert W. Doty, Ehab Samuel, Agnes M. Samuel, Victor Songmene, Fawzy H. Samuel. 2025 « Effect of melt treatment and heat treatment on the performance of aluminum cylinder heads ». Materials vol. 18 , nº 5
Herbert Doty, Ehab Samuel, Agnes M. Samuel, Ehab Elsharkawi, Victor Songmene, Fawzy H. Samuel. 2025 « Effect of Fe concentration and superheating on the microstructure and tensile properties of high Mg 413.0-Type Alloys: Role of Sr, Be, P, and La ». Materials vol. 18 , nº 2
Lysandre Finta-Laurent, Julia Guérineau, Philippe Terrier, Louis Rivest. 2025 « Comparaison de l’impact environnemental réalisé sous Sustainability de SolidWorks avec SimaPro lors de la phase de conception de pièces aéronautiques ». Communication lors de la conférence : Symposium CERIEC (Montréal, QC, Canada, 4 avril 2025)
Julia Guérineau, Louis Rivest. 2025 « Reactivating product development knowledge through short learning video capsules ». Communication lors de la conférence : Canadian Engineering Education Association Conference = Conférence de l'Association Canadienne de l'Éducation en Génie CEEA-CAÉG (Montréal, QC, Canada, June 18-21, 2025)
Kianoosh Kaveh, Mansoor Barati, Mohammad Jahazi, Elmira Moosavi-Khoonsari. 2025 « Degradation mechanisms of magnesia-carbon refractories in radiation heat-affected wall of steel electric arc furnace ». Ceramics International
Numan Khan, Sylvie Nadeau, Xuan-Tan Pham, Conrad Boton. 2025 « Toward a decision support system for a toolbox meeting pertaining to roofing activities in construction ». Proceedings of the Canadian Society for Civil Engineering Annual Conference 2023 : Construction Track (Moncton, NB, Canada, May 24-27, 2023) Springer Cham
Abdelhalim Loucif, Davood Shahriari, Kanwal Chadha, Chunping Zhang, Jean-Benoit Morin, Mohammad Jahazi. 2025 « Effect of cooling rate on the as-cast microstructure of a high strength steel produced in a large size ingot ». Key Engineering Materials vol. 1016. p. 9-14
Hamza Sofiane Meddas, Muftah Zorgani, Majid Heidari, Mousa Javidani, Tom Levasseur, Mohammad Jahazi. 2025 « Crystallographic texture and precipitation control via double austenitization in high-performance tool steel ». Materials and Design vol. 257
Elmira Moosavi-Khoonsari, Riadh Azzaz, Valentin Hurel, Mohammad Jahazi, Samira Ebrahimi Kahou. 2025 « Controlling minor element phosphorus in green electric steelmaking using neural networks ». REWAS 2025 : Circular Economy for the Energy Transition (Las Vegas , NV, USA, Mar. 23-27, 2025) Springer
Musa Muhammed, Mousa Javidani, Tahere Ebrahimi Sadrabadi, Majid Heidari, Tom Levasseur, Mohammad Jahazi. 2025 « Effect of layered architectural design on the tribological behaviour of AlTiN/AlTiCrN-based cathodic arc evaporated physical vapour deposition coatings ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
Sylvie Nadeau. 2025 « Expérimentations en HF/E pour la réalité augmentée ou mixte : comment définir la complexité d’assemblage/désassemblage ». Communication lors de la conférence : Congrès annuel AQHSST (Drummondville, QC, Canada, 21-22 mai 2025)
R. Nikbakht, M. Saadati, H. S. Kim, M. Jahazi, R. R. Chromik. 2025 « Multi-scale analysis of microstructural evolution and atomic bonding mechanisms in CoCrFeMnNi high-entropy alloys upon cold spray impact ». Journal of Materials Science and Technology vol. 208. p. 263-277
Narges Omidi, Manel Houria, Mohamed Meher Monjez, Mohammad Jahazi, Noureddine Barka, Abderrazak El Ouafi. 2025 « Processing parameters optimization for enhanced mechanical strength in PBF-ed H13 tool steel: Minimizing manufacturing defects including microstructural inhomogeneity, sub-surface porosities, and oxide formation ». International Journal of Advanced Manufacturing Technology vol. 136 , nº 5. p. 2681-2706
Narges Omidi, Asim Iltaf, Manel Houria, Mohammad Jahazi, Noureddine Barka, Claude Belzile. 2025 « Enhancing mechanical properties of additively manufactured H13: A two-step approach integrating processing parameters optimization and a tailored heat treatment ». Metals and Materials International vol. 31 , nº 5. p. 1286-1312
Lida Radan, Victor Songmene, Agnes M. Samuel, Fawzy H. Samuel. 2025 « Effects of alloy composition, hardness, and milling parameters on the cutting forces of Al-Li-based alloys ». Materials vol. 18 , nº 12
Navneeth Rajakrishnan, Morteza Sadeghifar, Pinaki Bhattacharjee, Henri Champliaud, Mohammad Jahazi. 2025 « Kinetics of austenite formation in a medium-carbon, low-alloy steel with an initial martensite microstructure: Influence of prior austenite grain size ». Journal of Manufacturing and Materials Processing vol. 9 , nº 1
Saeid SaediArdahaei, Xuan-Tan Pham. 2025 « Multi-response optimization of aluminum laser spot welding with sinusoidal and cosinusoidal power profiles based on Taguchi-Grey relational analysis ». Materials vol. 18 , nº 13
Gamaliel Salazar, Jean-Sébastien Lemyre-Baron, Mohammad Jahazi, Henri Champliaud, Antoine Tahan. 2025 « Analysis of geometry orientation in the calculation of transient heat fluxes during immersion quenching of hollow cylinder ». QDE 2025: Proceedings of the 3rd International Conference on Quenching and Distortion Engineering (Vancouver, BC, Canada, May 06-07, 2025) ASM International
Gamaliel Salazar, Jean-Sébastien Lemyre-Baron, Mohammad Jahazi, Henri Champliaud, Antoine Tahan. 2025 « Determination of thermal boundary conditions using piecewise hermite polynomials during the air transfer step of an industrial quenching process ». Journal of Thermal Science and Engineering Applications vol. 17 , nº 9
Mohamed Slamani, Abdelmalek Elhadi, Salah Amroune, Mustapha Arslane, Othman Y. Alothman, Omar Awayssa, Jean-François Chatelain, Mohammad Jawaid. 2025 « Analysis of entry and exit hole delaminations during drilling of jute/palm fiber reinforced hybrid composites using HSS drill bits ». Journal of Natural Fibers vol. 22 , nº 1
Mohamed Slamani, Abdelmalek Elhadi, Salah Amroune, Mustapha Arslane, Moussa Zaoui, Nashmi Alrasheedi, Borhen Louhichi, Jean-François Chatelain. 2025 « Bootstrap analysis for predicting circularity and cylindricity errors in palm/jute fiber reinforced hybrid composites ». Measurement: Journal of the International Measurement Confederation vol. 249
Mohamed Slamani, Siwar Jammel, Jean-François Chatelain. 2025 « Effects of wax and graphene concentrations on cutting force in drilling GFRP composites: A comprehensive study using a full factorial design of experiments ». Journal of Composite Materials
Ehsan Tolouei, Valentin Hurel, Abdelhalim Loucif, Jean-Benoit Morin, Mohammad Jahazi. 2025 « Influence of the as-quenched state and tempering heating rate on microstructural characteristics of a high-strength steel ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
Ehsan Tolouei, Mohammad Saadati, Jean -Benoit Morin, Carlos Garcia-Mateo, Mohammad Jahazi. 2025 « Influence of bainitic transformation temperature on microstructure evolution during isothermal holding and subsequent cooling ». Materials Chemistry and Physics vol. 345
Irfan Ullah, Esther Titilayo Akinlabi, Jules Kouam, Victor Songmene. 2025 « A comprehensive experimental investigation on the correlation between chip formation, machined surface integrity, and particle emissions during high-speed milling of TC4 titanium alloy ». International Journal of Advanced Manufacturing Technology vol. 136 , nº 7-8. p. 3285-3301
V. Valdesse Eko'Ola, S. Nadeau. 2025 « Systematic selection of visual and cognitive assistance equipment: Case of gas turbine assembly in narrow spaces ». Intelligent control and automation vol. 16 , nº 3. p. 80-109

Zeli Arhumah, Xuan-Tan Pham. 2024 « Microstructure and thermal mechanical behavior of arc-welded aluminum alloy 6061-T6 ». Journal of Manufacturing and Materials Processing vol. 8 , nº 3
H. Barakat, Y. Zedan, A. M. Samuel, V. Songmene, F. H. Samuel. 2024 « Parameters controlling drilling and tapping characteristics of aluminum based alloys ». Light Metals (Orlando, FL, USA, Mar. 03-07, 2024) Springer
Emmanuel Jonathan Bouche Noumbi, Lucas Hof, Sylvie Nadeau. 2024 « Design of a manufacturing system using the customer journey mapping method: hybrid solar panel assembly (Manual-Automated-5.0), ». Congrès IISE 2024 = IISE Annual Conference & Expo 2024 (Montreal, QC, Canada, May 18-21, 2024)
Prashant Dhondapure, Navneeth Rajakrishnan, Soumyaranjan Nayak, Henri Champliaud, Jean-Benoit Morin, Mohammad Jahazi. 2024 « Influence of deformation path on microstructure evolution during the open die forging of large size ingot of high strength steel: Experiments and FE analysis ». International Journal of Advanced Manufacturing Technology vol. 134 , nº 7-8. p. 3733-3750
Djoher Djefour, Sylvie Nadeau, Kurt Landau. 2024 « Mise en application d’une analyse ergonomique couplée à une étude et une mesure du travail dans JACK 7.1 ». Communication lors de la conférence : 44e congrès de l’AQHSST : Fragilisation de la prévention au travail dans un contexte de pénurie : Défis et solutions (Valleyfield, QC, Canada, 22-24 mai 2024)
Simin Dourandish, Henri Champliaud, Jean -Benoit Morin, Mohammad Jahazi. 2024 « Numerical simulation and experimental validation of microstructure evolution during the upsetting process of a large size martensitic stainless steel forging ». International Journal of Material Forming vol. 17 , nº 4
Abdelmalek Elhadi, Mohamed Slamani, Salah Amroune, Mustapha Arslane, Jean-François Chatelain, Mohammad Jawaid, Tarek Bidi. 2024 « Precision drilling optimization in jute/palm fiber reinforced hybrid composites ». Measurement: Journal of the International Measurement Confederation vol. 236
Eslam M. Fayed, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2024 « Effect of microwave hybrid heat treatment on the microstructure and hardness of 3D printed Inconel 718 superalloy ». Canadian Metallurgical Quarterly vol. 63 , nº 2. p. 312-328
Florian Romaric Fotso Djouche, Sylvie Nadeau. 2024 « La prévention des risques dus aux roches branlantes dans le secteur minier souterrain : opportunités en vue ». TD+ Votre travail durable vol. 0 , nº 2. p. 35-39
Oussama Ghnaya, Hamidreza Pourzarei, Louis Rivest, Conrad Boton. 2024 « Comparing IT tools used by a sample of BIM- and PLM-supported industries for design/engineering change management ». International Journal of Product Lifecycle Management vol. 15 , nº 4. p. 343-364
Neda Ghodrati, Henri Champliaud, Jean -Benoit Morin, Mohammad Jahazi. 2024 « Influence of the hot-top thermal regime on the severity and extent of macrosegregation in large-size steel ingots ». Journal of Manufacturing and Materials Processing vol. 8 , nº 2
Neda Ghodrati, Patrice Ménard, Jean -Benoit Morin, Mohammad Jahazi. 2024 « Influence of hot top geometry on columnar-to-equiaxed transition in a 12 MT steel ingot ». Journal of Materials Research and Technology vol. 31. p. 3489-3508
Madani Grine, Mohamed Slamani, Aissa Laouissi, Mustapha Arslane, Mansour Rokbi, Jean-François Chatelain. 2024 « Enhanced investigations and modeling of surface roughness of epoxy/Alfa fiber biocomposites using optimized neural network architecture with genetic algorithms ». International Journal of Advanced Manufacturing Technology vol. 130 , nº 5-6. p. 3115-3132
Mohamed Imad Eddine Heddar, Brahim Mehdi, Nedjoua Matougui, Souheil Antoine Tahan, Mohammad Jahazi. 2024 « Adaptable multi-objective optimization framework: Application to metal additive manufacturing ». International Journal of Advanced Manufacturing Technology vol. 132 , nº 3-4. p. 1897-1914
Mir Mehrdad Hosseini, Jacques Lanteigne, Carlo Baillargeon, Mohammad Jahazi, Henri Champliaud. 2024 « Development of a flow rule based on a unified plasticity model for 13Cr-4Ni low-carbon martensitic stainless steel subject to post-weld heat treatment ». Metals vol. 14 , nº 7
Ludovic Jego, Majid Heidari, Muftah Zorgani, Tom Levasseur, Mohammad Jahazi. 2024 « Impact of short-time annealing on AISI 8670 tool steel saw during industrial brazing process ». Next Materials vol. 2
A. Karevan, S. Nadeau. 2024 « Fostering AI-human collaboration in industry 5.0 manufacturing ». 22nd Triennal Congress of the International Ergonomics Association (IEA) (Jeju Island, Korea, Aug. 25-29, 2024) International Ergonomics Association (IEA)
Ali Karevan, Sylvie Nadeau. 2024 « A comprehensive STPA-PSO Framework for quantifying smart glasses risks in manufacturing ». Heliyon vol. 10 , nº 9
Ali Karevan, Sylvie Nadeau. 2024 « FRAM effectiveness in the era of Industry 4.0: A dual perspective review ». Proceedings of the IISE Annual Conference and Expo (Montreal, QC, Canada, May 18-21, 2024) Institute of Industrial and Systems Engineers, IISE
Numan Khan, Sylvie Nadeau, Xuan-Tan Pham, Conrad Boton. 2024 « Exploring associations between accident types and activities in construction using natural language processing ». Automation in Construction vol. 164
Hugo Locquet, Louis Rivest, Matthieu Bricogne. 2024 « A State of the Art of collaborative CAD solutions ». Product Lifecycle Management. Leveraging Digital Twins, Circular Economy, and Knowledge Management for Sustainable Innovation : 20th IFIP WG 5.1 International Conference, PLM 2023, Revised Selected Papers, Part I (Montreal, QC, Canada, July 09-12, 2023) Springer
Wael Mateur, Victor Songmene, Jules Kouam. 2024 « Experimental investigation on the effects of tool geometry and cutting conditions on machining behavior during edge finishing of granite using concave and chamfered profiling tools ». Micromachines vol. 15 , nº 3
Vanella Mbakop Nanshie, Ali Aidibe, Majid Heidari, Mohammad Jahazi. 2024 « Impact of coating and microstructure on wear resistance of tool steels for wood cutting: a novel approach to quantification and analysis of wear-related damages ». Journal of Wood Science vol. 70 , nº 1
Hamza Sofiane Meddas, Muftah Zorgani, Majid Heidari, Mousa Javidani, Tom Levasseur, Mohamed Jahazi. 2024 « Enhanced durability of wood cutting tools through thermal cycling ». Materials vol. 17 , nº 20
Hamed Mirabi, Fatemeh Mirakhorli, Jean-François Béland, François Nadeau, Vincent Demers, Philippe Bocher. 2024 « On selecting proper process parameters for cold metal transfer (CMT)–based wire arc additive manufacturing (WAAM) process ». International Journal of Advanced Manufacturing Technology vol. 133 , nº 11-12. p. 6083-6093
Sajad Mirzaei, Nima Bohlooli Arkhazloo, Jean-Benoît Morin, Mohammad Jahazi. 2024 « Influence of heating elements layout on temperature uniformity in a large size heat treatment furnace ». Case Studies in Thermal Engineering vol. 61
A. Momeni, G. R. Ebrahimi, M. Jahazi, H. R. Ezatpour. 2024 « Microstructure characterization and dynamic recrystallization behavior of Ni–Cu alloy during hot deformation ». Mechanics of Materials vol. 193
Musa Muhammed, Mousa Javidani, Tahere Ebrahimi Sadrabadi, Majid Heidari, Tom Levasseur, Mohammad Jahazi. 2024 « A comprehensive review of cathodic arc evaporation physical vapour deposition (CAE-PVD) coatings for enhanced tribological performance ». Coatings vol. 14 , nº 3
S. Nadeau, R. Chénier, D. Thériault. 2024 « Jeune pousse deviendra grande : croire et se consacrer à l’excellence et l’innovation en SST ». TD+ Votre travail durable vol. 0 , nº 1. p. 19
Sylvie Nadeau, Ralph Bruder, Lucas A. Hof. 2024 « Utilisation de lunettes intelligentes dans l’assemblage/ désassemblage : État de l’art ». TD+ Votre travail durable vol. 0 , nº 1. p. 21-27
Sylvie Nadeau, Antoine Tahan, Jean-Pierre Kenné, Lucas A. Hof. 2024 « Le désassemblage de produits : enjeux et perspectives ». Communication lors de la conférence : 44e congrès de l’AQHSST : Fragilisation de la prévention au travail dans un contexte de pénurie : Défis et solutions (Valleyfield, QC, Canada, 22-24 mai 2024)
Mohamed Ahmed Omrane, Raphaël Côté, Vincent Demers. 2024 « Optimization of the printability envelope of low-viscosity powder-binder feedstocks used in material extrusion 3D printing ». Rapid Prototyping Journal vol. 30 , nº 2. p. 364-377
Seong Je Park, Woongbeom Heogh, Jeongho Yang, Sukhyun Kang, Wonjong Jeong, Hoyoung Lee, Tae-Sik Jang, Hyun-Do Jung, Mohammad Jahazi, Seung Chul Han, Hyoung Seop Kim, Myoung-Gyu Lee, Susmita Bose, Amit Bandyopadhyay, Martin Byung-Guk Jun, Young Won Kim, Xingyu Fu, Rigoberto C. Advincula, Clodualdo Aranas, Sang Hoon Kim. 2024 « Meta-structure of amorphous-inspired 65.1Co28.2Cr5.3Mo lattices augmented by artificial intelligence ». Advanced Composites and Hybrid Materials vol. 7 , nº 6
Hamidreza Pourzarei, Conrad Boton, Louis Rivest. 2024 « On considering a PLM platform for design change management in construction ». Product Lifecycle Management. Leveraging Digital Twins, Circular Economy, and Knowledge Management for Sustainable Innovation : 20th IFIP WG 5.1 International Conference, PLM 2023, Revised Selected Papers, Part I (Montreal, QC, Canada, July 09-12, 2023) Springer
Hamidreza Pourzarei, Oussama Ghnaya, Louis Rivest, Conrad Boton. 2024 « Engineering change management: Comparing theory to a case study from aerospace ». International Journal of Product Lifecycle Management vol. 15 , nº 4. p. 318-342
Benoit Ribeiro, Sylvie Nadeau. 2024-06-11 « Exosquelettes des membres inférieurs : Qu’en savons-nous? ». Substance ÉTS
Benoit Ribeiro, Sylvie Nadeau. 2024-06-11 « Lower Limb Exoskeletons: What Do We Know About Them? ». Substance ÉTS
Morteza Sadeghifar, Rene Billardon, Denis Delagnes, Henri Champliaud, Antoine Tahan, Mohammad Jahazi. 2024 « A novel approach for accurate development of the incremental plastic multiplier and consistent tangent operator in thermo-elasto-plastic modeling of materials ». Mechanics of Materials vol. 199
Saeid SaediArdahaei, Xuan Tan Pham. 2024 « Comparative numerical analysis of keyhole shape and penetration depth in laser spot welding of aluminum with power wave modulation ». Thermo vol. 4 , nº 2. p. 222-251
Saeid SaediArdahaei, Xuan-Tan Pham. 2024 « Toward stabilizing the keyhole in laser spot welding of aluminum: Numerical analysis ». Materials vol. 17 , nº 19
Gamaliel Salazar, Jean-Sebastien Lemyre-Baron, Mohammad Jahazi, Henri Champliaud, Antoine Tahan. 2024 « Identification of thermal boundary conditions during industrial quenching (air transfer + mineralized oil immersion) of a hollow cylinder ». 29th International Federation for Heat Treatment and Surface Engineering World Congress, IFHTSE (Cleveland, OH, USA, Sept. 30-Oct. 03, 2024) ASM International
Ehab Samuel, Agnes M. Samuel, Victor Songmene, Herbert W. Doty, Fawzy H. Samuel. 2024 « Analysis of Ni-Cu interaction in aluminum-based alloys: Hardness, tensile and precipitation behavior ». Materials vol. 17 , nº 18
Ehab Samuel, Agnes M. Samuel, Victor Songmene, Fawzy H. Samuel. 2024 « Effect of casting processes, rare earth metals, and Sr addition on porosity formation in Al-Si cast alloys ». In Recent advancements in aluminum alloys. IntechOpen
Ehab Samuel, Hicham Tahiri, Agnes M. Samuel, Victor Songmene, Fawzy H. Samuel. 2024 « A review on fundamentals of grain refining of Al-Si cast alloys ». In Recent advancements in aluminum alloys. IntechOpen
M. Slamani, H. Chafai, J. F. Chatelain. 2024 « Effect of milling parameters on the surface quality of a flax fiber-reinforced polymer composite ». Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering vol. 238 , nº 4. p. 1537-1544
Mohamed Slamani, Hamza Chafai, Jean-François Chatelain. 2024 « Impact of fiber orientation on cutting forces and surface quality in flax/epoxy composite machining ». Journal of Composite Materials
Mohamed Slamani, Jean-François Chatelain. 2024 « Enhancing robotic trimming accuracy of carbon fiber reinforced polymers: Investigating the impact of cutting parameters ». Academic Journal of Manufacturing Engineering vol. 22 , nº 4. p. 47-51
Mohamed Slamani, Abdelmalek Elhadi, Salah Amroune, Mustapha Arslane, Walid Jomaa, Hassan Fouad, Jean-François Chatelain, Mohammad Jawaid. 2024 « Investigating the impact of drill material on hole quality in jute/palm fiber reinforced hybrid composite drilling with uncertainty analysis ». Heliyon vol. 10 , nº 17
Mohamed Slamani, Hocine Makri, Aissa Boudilmi, Ilian A. Bonev, Jean-François Chatelain. 2024 « Calibration strategies for enhancing accuracy in serial industrial robots for orbital milling applications ». Industrial Robot vol. 51 , nº 4. p. 558-569
Ali Tahmasbi, Jean Brice Mandatsy Moungomo, Agnes M. Samuel, Yasser Zedan, Victor Songmene, Fawzy H. Samuel. 2024 « Role of Li and Sc additions and machining conditions on cutting forces on milling behavior of A7075-based alloys ». Journal of Manufacturing and Materials Processing vol. 8 , nº 2
Ornwipa Thamsuwan, Valérie Tuyêt Mai Ngô, Christian Tiaya Tedonchio, Sylvie Nadeau. 2024 « Redéfinir l'ergonomie dans la formation en ingénierie : Intégrer l'accessibilité et les outils numériques dans la conception en ingénierie ». Congrès de l’Association Canadienne de l’Éducation en Génie (Edmonton, AB, Canada, 15-19 juin 2024) Association Canadienne de l’Éducation en Génie
Ehsan Tolouei, Valentin Hurel, Abdelhalim Loucif, Jean-Benoit Morin, Mohammad Jahazi. 2024 « Influence of the as quenched state and tempering temperature on the final microstructure and hardness of a high strength medium carbon steel ». Materials Chemistry and Physics vol. 325
Yaniel Torres, Sylvie Nadeau. 2024 « Contribution of the systems approach to quality management in manufacturing: The case of human error analysis in complex manual assembly ». Communication lors de la conférence : Congrès IISE 2024 = IISE Annual Conference & Expo 2024 (Montreal, QC, Canada, May 18-21, 2024)
Irfan Ullah, Esther T. Akinlabi, Victor Songmene, Jules Kouam, Morteza Sadeghifar. 2024 « A multiscale finite element modeling for predicting the surface integrity induced by thermo-mechanical loads during high-speed milling of Ti-6Al-4V ». CIRP Journal of Manufacturing Science and Technology vol. 52. p. 246-263
Irfan Ullah, Esther Titilayo Akinlabi, Victor Songmene. 2024 « Thermo-metallo-mechanical based phase transformation modeling for high-speed milling of Ti–6Al–4V through stress-strain and temperature effects ». Journal of Materials Research and Technology vol. 30. p. 894-909
Romuald Valdesse Eko'Ola, Sylvie Nadeau, Kurt Landau. 2024 « Vers une démarche d’aide au choix d’une technologie d’assistance visuelle ». Communication lors de la conférence : 44e congrès de l’AQHSST : Fragilisation de la prévention au travail dans un contexte de pénurie : Défis et solutions (Valleyfield, QC, Canada, 22-24 mai 2024)
Jeongho Yang, Woongbeom Heogh, Hogi Ju, Sukhyun Kang, Tae-Sik Jang, Hyun-Do Jung, Mohammad Jahazi, Seung Chul Han, Seong Je Park, Hyoung Seop Kim, Susmita Bose, Amit Bandyopadhyay, Martin Byung-Guk Jun, Young Won Kim, Dae-kyeom Kim, Rigoberto C. Advincula, Clodualdo Aranas, Sang Hoon Kim. 2024 « Functionally graded structure of a nitride-strengthened Mg2Si-based hybrid composite ». Journal of Magnesium and Alloys vol. 12 , nº 3. p. 1239-1256

Mohammed Alkhabbat, François Nadeau, Fatemeh Mirakhorli, Thien-My Dao, Xuan Tan Pham. 2023 « Effect of laser welding parameters with different fillers on solidification cracking and mechanical properties of AA7075 ». Metals vol. 13 , nº 10
Francis Arès, Dorian Delbergue, Vincent Demers. 2023 « Injection flow rate threshold preventing atypical in-cavity pressure during low-pressure powder injection molding ». Powders vol. 2 , nº 4. p. 709-726
Mohammad E. Bajgholi, Gilles Rousseau, Edward Ginzel, Denis Thibault, Martin Viens. 2023 « Total focusing method applied to probability of detection ». International Journal of Advanced Manufacturing Technology vol. 126 , nº 7-8. p. 3637-3647
Mohammad Ebrahim Bajgholi, Gilles Rousseau, Martin Viens, Denis Thibault. 2023 « Advanced ultrasonic inspection methodologies for fitness-for-service (F.F.S) assessment of hydraulic turbines ». International Journal of Advanced Manufacturing Technology vol. 129 , nº 5-6. p. 2621-2633
Mohammad Ebrahim Bajgholi, Gilles Rousseau, Martin Viens, Denis Thibault, Martin Gagnon. 2023 « Reliability assessment of non-destructive testing (NDT) for the inspection of weld joints in the hydroelectric turbine industry ». International Journal of Advanced Manufacturing Technology vol. 128 , nº 9-10. p. 4223-4233
Frederic Bedard, Abdelhalim Loucif, Mohammad Jahazi, Victor Songmene. 2023 « Microstructural damage during electrical discharge machining of a high silicon aluminum alloy for space applications ». International Journal of Advanced Manufacturing Technology vol. 128 , nº 5-6. p. 2311-2317
Conrad Boton, Louis Rivest, Sylvain Kubicki, Oussama Ghnaya. 2023 « 4D simulation research in construction: A systematic mapping study ». Archives of Computational Methods in Engineering vol. 30 , nº 4. p. 2451-2472
Wafa Bounaouara, Louis Rivest, Antoine Tahan. 2023 « Combining large-scale 3D metrology and mixed reality for assembly quality control in modular construction ». CONVR2023 Proceedings of the 23rd International Conference on Construction Applications of Virtual Reality : Managing the Digital Transformation of Construction Industry (Florence, Italy, Nov. 13-16, 2023) Firenze University Press
Bruno Cognet, Jean-Philippe Pernot, Louis Rivest, Christophe Danjou. 2023 « Systematic comparison of digital maturity assessment models ». Journal of Industrial and Production Engineering vol. 40 , nº 7. p. 519-537
Raphaël Cote, Vincent Demers, Nicole R. Demarquette, Sébastien Charlon, Jérémie Soulestin. 2023 « Producing metallic parts using 3D printing of low-viscosity powder-binder feedstock: A feasibility study ». 37th International Conference of the Polymer Processing Society (Fukuoka, Japan, Apr. 11-15, 2022) AIP Publishing
R. Côté, D. Delbergue, V. Demers. 2023 « Detection of defects in parts produced by material extrusion 3D printing using in-line pressure measurement ». International Conference on Powder Metallurgy and Particulate Materials, PowderMet (Las Vegas , NV, USA, June 18-21, 2023)
Raphaël Côté, Vincent Demers, Nicole R. Demarquette, Sébastien Charlon, Jérémie Soulestin. 2023 « A strategy to eliminate interbead defects and improve dimensional accuracy in material extrusion 3D printing of highly filled polymer ». Additive Manufacturing vol. 68
D. Delbergue, L. Boudeau, V Demers. 2023 « Development of an aluminum-based feedstock for material extrusion 3D printing ». International Conference on Powder Metallurgy and Particulate Materials, PowderMet (Las Vegas , NV, USA, June 18-21, 2023)
Vincent Demers. 2023 « Material extrusion 3D printing using low-viscosity MIM-like feedstocks ». International Conference on Powder Metallurgy and Particulate Materials, PowderMet (Las Vegas , NV, USA, June 18-21, 2023)
Prashant Dhondapure, Pierre Tize Mha, Soumyaranjan Nayak, Lea Ebacher, Simin Dourandish, Henri Champliaud, Jean -Benoit Morin, Mohammad Jahazi. 2023 « Influence of deformation path on the stress state and damage evolution along the central axis of a large size forged ingot of AISI H13 steel ». Journal of Materials Research and Technology vol. 27. p. 8244-8257
Kevin Gildas Dongmo Tambah, Jean-Pierre Kenné, Victor Songmene. 2023 « Preventive maintenance and silica exposure limits integrated in the production planning of a granite processing unit ». Journal of Quality in Maintenance Engineering vol. 29 , nº 1. p. 1-26
Antoine Geisler, Morteza Sadeghifar, Jean -Benoit Morin, Abdelhalim Loucif, Mohammad Jahazi. 2023 « Void closure during open die forging of large size martensitic stainless-steel ingots: an experimental-analytical-numerical study ». International Journal of Material Forming vol. 16 , nº 1
Oussama Ghnaya, Hamidreza Pourzarei, Louis Rivest, Conrad Boton. 2023 « Role of electronic document management systems in the design change management process ». Proceedings of the Canadian Society of Civil Engineering Annual Conference 2022 (Whistler, BC, Canada, May 25-28, 2022) Springer Science and Business Media
Abram Girgis, Ehab Samuel, Agnes M. Samuel, Victor Songmene, Fawzy H. Samuel. 2023 « Effect of Cu content on the alloy tensile properties of Al-Cu based alloys tested at 25 degrees C and 250 degrees C: Application of the concept of quality index ». Materials vol. 16 , nº 4
Madani Grine, Mohamed Slamani, Mustapha Arslane, Mansour Rokbi, Jean-François Chatelain. 2023 « Investigation of the machining behavior of unidirectional Alfa (Stipa tenacissima L.)/epoxy composite material ». International Journal of Advanced Manufacturing Technology vol. 128 , nº 7-8. p. 3183-3196
Faiçal Habassi, Manel Houria, Noureddine Barka, Mohammad Jahazi. 2023 « Influence of post-treatment on microstructure and mechanical properties of additively manufactured C300 maraging steel ». Materials Characterization vol. 202
Foad Haghniaz, Dorian Delbergue, Raphaël Côté, Vincent Demers. 2023 « Mold filling behaviour of LPIM feedstocks using numerical simulations and real-scale injections ». Powder Metallurgy vol. 66 , nº 5
Elodie Hochscheid, Maggie Falardeau, James Lapalme, Conrad Boton, Louis Rivest. 2023 « Practitioners' concerns about their liability toward BIM collaborative digital mockups: Case study in civil engineering ». Journal of Construction Engineering and Management vol. 149 , nº 9
Mahshad Javidikia, Morteza Sadeghifar, Henri Champliaud, Mohammad Jahazi. 2023 « Grain size and temperature evolutions during linear friction welding of Ni-base superalloy Waspaloy: Simulations and experimental validations ». Journal of Advanced Joining Processes vol. 8
Ali Karevan, Sylvie Nadeau. 2023 « The role of industry 5.0 in reducing the risk of human error in manufacturing- a critical literature review ». CIGI Qualita MOSIM : Propulser la performance - Interconnectivité et collaboration dans un contexte d'intelligence artificielle (Trois-Rivières, QC, Canada, June 14-16, 2023) Université du Québec à Trois-Rivières
Nasim Khoddammhoammadi, Valerie Tuyet Mai Ngô, Sylvie Nadeau. 2023 « Integrating smart glasses in a hybrid manufacturing system: Towards a better understanding of impacts on productivity, quality and ergonomics/human factors ». CIGI Qualita MOSIM : Propulser la performance - Interconnectivité et collaboration dans un contexte d'intelligence artificielle (Trois-Rivières, QC, Canada, June 14-16, 2023) Université du Québec à Trois-Rivières
Rafael S. Kurusu, Mohsen Gholami, Nicole R. Demarquette, Vincent Demers. 2023 « Surface properties of molds for powder injection molding and their effect on feedstock moldability and mold adhesion ». International Journal of Advanced Manufacturing Technology vol. 126 , nº 1-2. p. 381-390
Alexandre Macloud, Louis Rivest, Ali Zeighami, Pierre-Olivier Lemieux, Rachid Aissaoui. 2023-10-03 « Extracting grasping cues from tool geometry for digital human models ». Brevet américain US 11,775,699.
Mohammad Maroufkhani, Soorosh Hakimian, Alireza Khodabandeh, Iulian Radu, Lucas A. Hof, Mohammad Jahazi. 2023 « Influence of oxygen content in the protective gas on pitting corrosion resistance of a 316l stainless steel weld joint ». Materials vol. 16 , nº 17
Saleh Meiabadi, Vincent Demers, Louis Dufresne. 2023 « Smoothed particle hydrodynamics approach for simulation of non-newtonian flow of feedstocks used in powder injection molding ». Metals vol. 13 , nº 9
Saleh Meiabadi, Fardin Nematzadeh, Kianoosh Kornokar, Hossein Mostaan, Mahmoud ShamsBorhan, Rasoul Khandan, Vincent Demers, Jonathan Lawrence, Mahmoud Moradi. 2023 « Contrasting the mechanical and metallurgical properties of laser welded and gas tungsten arc welded S500MC steel ». Welding in the World vol. 67 , nº 9. p. 2215-2224
Pierre Tize Mha, Prashant Dhondapure, Mohammad Jahazi, Amèvi Tongne, Olivier Pantale. 2023 « Interpolation and extrapolation performance measurement of analytical and ANN-based flow laws for hot deformation behavior of medium carbon steel ». Metals vol. 13 , nº 3
Sajad Mirzaei, Nima Bohlooli Arkhazloo, Farzad Bazdidi-Tehrani, Jean -Benoit Morin, Abdelhalim Loucif, Mohammad Jahazi. 2023 « Influence of spacers and skid sizes on heat treatment of large forgings within an industrial electric furnace ». Energies vol. 16 , nº 7
A. M. A. Mohamed, E. Samuel, A. M. Samuel, F. H. Samuel, V. Songmene, H. W. Doty. 2023 « Effect of intermetallics and tramp elements on porosity formation and hardness of Al-Si-Mg and Al-Si-Cu-Mg alloys ». International Journal of Metalcasting vol. 17 , nº 2. p. 664-681
A. M. A. Mohamed, Y. Zedan, A. M. Samuel, H. W. Doty, V. Songmene, F. H. Samuel. 2023 « Effect of free cutting elements on the microstructural evaluation and mechanical properties of Al–Si cast alloys ». International Journal of Metalcasting vol. 17 , nº 2. p. 959-979
Mahmoud Moradi, Kianoosh Kornokar, Fardin Nematzadeh, Hossein Mostaan, Saleh Meiabadi, Vincent Demers, Jonathan Lawrence. 2023 « Microstructural and mechanical investigation on fiber laser welding of S500MC steel ». Sadhana - Academy Proceedings in Engineering Sciences vol. 48 , nº 1
Musa Muhammed, Mousa Javidani, Majid Heidari, Mohammad Jahazi. 2023 « Enhancing the tribological performance of tool steels for wood-processing applications: A comprehensive review ». Metals vol. 13 , nº 8
Alimeh Mofidi Naeini, Sylvie Nadeau. 2023 « Proposed integrated FRAM/STPA risk analysis of data gloves in assembly 4.0 system ». Robotics and Computer-Integrated Manufacturing vol. 81
Frédéric Noël, Felix Nyffenegger, Louis Rivest, Abdelaziz Bouras. 2023 « Product lifecycle management. PLM in transition times: The place of humans and transformative technologies : 19th IFIP WG 5.1 International Conference, PLM 2022, Grenoble, France, July 10–13, 2022, Revised Selected Papers ». 695 p.
Ribet Junior Nsamo, Sylvie Nadeau. 2023-05-01 « Conception d’un outil de gestion de projet universitaire ». Substance ÉTS
Ribet Junior Nsamo, Sylvie Nadeau. 2023-05-01 « Designing an academic project management tool ». Substance ÉTS
Narges Omidi, Pedram Farhadipour, Lamya Baali, Karim Bensalem, Noureddine Barka, Mohammad Jahazi. 2023 « A comprehensive review of additively manufactured H13 tool steel applicable in the injection mold industry: Applications, designs, microstructure, mechanical properties ». JOM vol. 75 , nº 11. p. 4457-4469
D. E. Ondze Gazani, S. Nadeau, L. Hof. 2023 « Mise en service des lunettes intelligentes pour l’assemblage ou le désassemblage ». 43e congrès de l’AQHSST (Trois-Rivières, QC, Canada, 10-12 mai 2023)
Emmanuel Pelletier, Vincent Demers. 2023 « Testing the limits of low-viscosity feedstock in material extrusion 3D printing of highly-filled polymer ». Communication lors de la conférence : HI-AM Conference (Halifax, NS, Canada, June 27-28, 2023)
Lida Radan, Victor Songmene, Yasser Zedan, Fawzy H. Samuel. 2023 « Investigating the effect of heat treatment on the microstructure and hardness of aluminum-lithium alloys ». Materials vol. 16 , nº 19
Maroua Raya, Ali Aidibe, Sylvie Nadeau, Lucas Hof, Hany Moustapha. 2023 « Livre blanc Réseau SDG Innovation: Au delà de l’industrie 4.0/5.0 : Vers une société Smart Digital Green ». 60 p.
Morteza Sadeghifar, Mahshad Javidikia, Abdelhalim Loucif, Mohammad Jahazi, Victor Songmene. 2023 « Experimental and numerical analyses of residual stress redistributions in large steel dies: Influence of tempering cycles and rough milling ». Journal of Materials Research and Technology vol. 24. p. 395-406
Gamaliel Salazar, Jean-Sébastien Lemyre-Baron, Mohammad Jahazi, Henri Champliaud, Antoine Tahan. 2023 « Analysis of industrial quenching (air transfer + oil immersion) and the cooling regimes after immersion ». Heat Treat 2023: Proceedings of the 32nd ASM Heat Treating Society Conference (Detroit, MI, USA, Oct. 17-19, 2023) ASM International
Agnes M. Samuel, Ehab Samuel, Victor Songmene, Fawzy H. Samuel. 2023 « A comparative study of grain refining of Al-(7–17%) Si cast alloys using Al-10% Ti and Al-4% B master alloys ». Materials vol. 16 , nº 7
Agnes M. Samuel, Ehab Samuel, Victor Songmene, Fawzy H. Samuel. 2023 « A review on porosity formation in aluminum-based alloys ». Materials vol. 16 , nº 5
Ehab Samuel, Agnes M. Samuel, Victor Songmene, Fawzy H. Samuel. 2023 « A review on the analysis of thermal and thermodynamic aspects of grain refinement of aluminum-silicon-based alloys ». Materials vol. 16 , nº 16
Mohamed Slamani, Jean-François Chatelain. 2023 « A review on the machining of polymer composites reinforced with carbon (CFRP), glass (GFRP), and natural fibers (NFRP) ». Discover Mechanical Engineering vol. 2 , nº 1
Mohamed Slamani, Aboubakr Saadallah, Hadj Faid, Jean-François Chatelain. 2023 « Reverse engineering of tram transmission gear ». Academic Journal of Manufacturing Engineering vol. 21 , nº 3. p. 110-117
Atefeh A. Tafti, Vincent Demers, Guillem Vachon, Vladimir Brailovski. 2023 « Influence of powder size on the moldability and sintered properties of irregular iron-based feedstock used in low-pressure powder injection molding ». Powder Technology vol. 420
Ali Tahmasbi, Agnes M. Samuel, Yasser Zedan, Victor Songmene, Fawzy H. Samuel. 2023 « Effect of aging treatment on the strength and microstructure of 7075-based alloys containing 2% Li and/or 0.12% Sc ». Materials vol. 16 , nº 23
Sandrine A. Tcheuhebou Tina, Mahshad Javidikia, Mohammad Jahazi, Victor Songmene. 2023 « The influence of tool geometry parameters on thermo-mechanical loads and residual stresses induced by orthogonal cutting of AA6061-T6: A numerical investigation ». Processes vol. 11 , nº 4
C. Tiaya, S. Nadeau, C. Boton, L. Rivest. 2023 « Maquettes numériques comme outil de prévention par la conception des risques de SST de la phase d’exploitation et de maintenance des ouvrages industriels ». Communication lors de la conférence : Groupe BIM du Québec : Soirée conférence - Impact social et économique (Montréal, QC, Canada, 21 juin 2023)
Pierre Tize Mha, Prashant Dhondapure, Mohammad Jahazi, Amèvi Tongne, Olivier Pantalé. 2023 « Artificial neural network-based critical conditions for the dynamic recrystallization of medium carbon steel and application ». Metals vol. 13 , nº 10

Mohamed H. Abdelaziz, Agnes M. Samuel, Herbert W. Doty, Victor Songmene, Fawzy H. Samuel. 2022 « Mechanical performance and precipitation behavior in Al-Si-Cu-Mg cast alloys: Effect of prolonged thermal exposure ». Materials vol. 15 , nº 8
A. Amjadian, J-F. Chatelain, D. Shariari. 2022 « Prediction of geometrical errors of thin floor components in milling using a flexible fixturing setup ». Communication lors de la conférence : IAARHIES 280th International Conference on Engineering & Technology, ICET (Vancouver, BC, Canada, Feb. 24-25, 2022)
Amir Amjadian, Jean-François Chatelain, Davood Shahriari. 2022 « Prediction of geometrical errors of thin floor components in milling using a flexible fixturing setup ». Journal of Advanced Research in Engineering & Technology vol. 6 , nº 1. p. 1-5
Nima Bohlooli Arkhazloo, Farzad Bazdidi-Tehrani, Mohammad Jadidi, Jean-Benoit Morin, Mohammad Jahazi. 2022 « Determination of temperature distribution during heat treatment of forgings: Simulation and experiment ». Heat Transfer Engineering vol. 43 , nº 12. p. 1041-1064
Mustapha Arslane, Mohamed Slamani, Belkacem Aoufi, Jean-François Chatelain. 2022 « Locator placement optimization during machining turbine blades using genetic algorithm ». ICAENS : 3rd International Conference on Applied Engineering and Natural Sciences ICAENS : Proceedings Book (Konya, Turkey, July 20-23, 2022)
Riadh Azzaz, Kianoosh Kaveh, Jean-Benoit Morin, Mohammad Jahazi, Elmira Moosavi-Khoonsari. 2022 « Slag characterization regarding refractory wear in EAF steelmaking route ». Affiche présentée lors de la conférence : 61st Annual Conference of Metallurgists (COM) (Montreal, QC, Canada, Aug. 21-24, 2022)
Haithem Bahri, Victor Songmene, Jules Kouam. 2022 « Experimental investigation on part quality and dust emission during minimum quantity lubricated (MQL) edge finishing of granite ». Micromachines vol. 13 , nº 10
Osiris Canciglieri Junior, Frédéric Noël, Louis Rivest, Abdelaziz Bouras. 2022 « Product lifecycle management. Green and blue technologies to support smart and sustainable organizations : 18th IFIP WG 5.1 International Conference, PLM 2021, Curitiba, Brazil, July 11–14, 2021, Revised Selected Papers, Part II ». : Springer.
Zhang Chunping, Abdelhalim Loucif, Mohammad Jahazi, Jean Benoit Morin. 2022 « FEM simulation of the effect of mold initial temperature on carbon macrosegregation in large-size steel ingots ». 10th International Conference on Material Science and Engineering Technology (ICMSET 2021)), the 5th International Conference on Building Materials and Materials Engineering (ICBMM 2021), and the 6th International Conference on Materials Technology and Ap (Kyoto, Japan - En ligne, Oct. 14-17, 2021) Trans Tech Publications
R. Côté, S. Ancé, S. Charlon, J. Soulestin, V. Demers, N. Demarquette. 2022 « Impact of the process parameters on printing pressure experienced in material extrusion additive manufacturing of highly-filled polymer (MEAM-HP) ». Communication lors de la conférence : 37th International Conference of the Polymer Processing Society (PPS-37) (Fukuoka, Japan, Apr. 11-15, 2022)
Simin Dourandish, Henri Champliaud, Jean -Benoit Morin, Mohammad Jahazi. 2022 « Microstructure-based finite element modeling of a martensitic stainless steel during hot forging ». International Journal of Advanced Manufacturing Technology vol. 123 , nº 7-8. p. 2833-2851
L. Ebacher, M. Jahazi, J. B. Morin, B. Ritchey. 2022 « Thermomechanical study of H13 hot forged bars ». 4th International Ingot Casting Rolling Forging, ICRF 2022 - Conference Proceedings (Pittsburgh, PA, USA, June 21-23, 2022) Association for Iron and Steel Technology, AISTECH
Shimaa El-Hadad, Agnes M. Samuel, Fawzy H. Samuel, Herbert W. Doty, Victor Songmene. 2022 « Effect of Bi and Ca on the solidification parameters of Sr-Modified Al-S-Cu (Mg) alloys ». Materials vol. 15 , nº 19
Adriana Eres-Castellanos, Muftah Zorgani, Davood Shahriari, Radu Romanica, Jose Antonio Jimenez, Carlos Garcia-Mateo, Mohammad Jahazi. 2022 « Effect of the ausforming deformation mode on bainitic transformation in a medium carbon high silicon steel ». Journal of Materials Research and Technology vol. 18. p. 3428-3442
Mohamed Esouilhem, Abdel-Hakim Bouzid, Sylvie Nadeau. 2022 « Pressure vessels and piping accident analysis and prevention: A case study in Canada ». International Journal of Safety and Security Engineering vol. 12 , nº 1. p. 105-114
Eslam M. Fayed, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2022 « Stability of the microstructure and elevated-temperature mechanical properties of additively manufactured Inconel 718 superalloy subjected to long-term in-service thermal cycling ». Materials Science and Engineering: A vol. 838
B. V. Feujofack Kemda, N. Barka, M. Jahazi, D. Osmani. 2022 « Multi-objective optimization of process parameters in resistance spot welding of A36 mild steel and hot dipped galvanized steel sheets using non-dominated sorting genetic algorithm ». Metals and Materials International vol. 28 , nº 2. p. 487-502
Seyedmorteza Ghaffarishahri, Louis Rivest. 2022 « A prototype of an automated feature recognition algorithm for aerospace sheet metal parts ». Computer-Aided Design and Applications vol. 19 , nº 4. p. 624-661
Neda Ghodrati, Mounir Baiteche, Abdelhalim Loucif, Paloma Isabel Gallego, Morin Jean-Benoit, Mohammad Jahazi. 2022 « Influence of hot top height on macrosegregation and material yield in a large-size cast steel ingot using modeling and experimental validation ». Metals vol. 12 , nº 11
Neda Ghodrati, Abdelhalim Loucif, Jean -Benoit Morin, Mohammad Jahazi. 2022 « Modeling of the influence of hot top design on microporosity and shrinkage cavity in large-size cast steel ingots ». 8th International Congress on the Science and Technology of Steelmaking (Montreal, QC, Canada, Aug. 02-04, 2022) Association for Iron & Steel Technology
Edward Ginzel, Mohammad E. Bajgholi, Mariana Burrowes M. Guimarâes, Fabrice Foucher, Gilles Rousseau, Martin Viens. 2022 « Total focusing method used for flaw sizing in probability of detection determination ». e-Journal of Nondestructive Testing vol. 27 , nº 7
Mathieu Grange, Sylvie Nadeau, Lucas Hof. 2022-11-02 « Disassembly 4.0/5.0 in the Automotive Industry ». Substance ÉTS
Mathieu Grange, Sylvie Nadeau, Lucas Hof. 2022-11-02 « Désassemblage 4.0/5.0 : le cas de l’industrie automobile ». Substance ÉTS
Madani Grine, Mohamed Slamani, Mustapha Arslane, Jean-François Chatelain. 2022 « Assessment of the hole quality during drilling alfa fiber (Stipa tenacissima) reinforced composites ». ICAENS : 3rd International Conference on Applied Engineering and Natural Sciences ICAENS : Proceedings Book (Konya, Turkey, July 20-23, 2022)
Julia Guerineau, Matthieu Bricogne, Louis Rivest, Alexandre Durupt. 2022 « Organizing the fragmented landscape of multidisciplinary product development: a mapping of approaches, processes, methods and tools from the scientific literature ». Research in Engineering Design vol. 33. p. 307-349
J. Hernandez-Sandoval, Y. Zedan, V. Songmene, M. H. Abdelaziz, F. H. Samuel, G. H. Garza-Elizondo. 2022 « Effect of minor addition of Ni and Zr on the high-temperature performance of Al-Si-Cu-Mg cast alloys ». International Journal of Metalcasting vol. 16 , nº 3. p. 1235-1251
Manel Houria, Nedjoua Matougui, Brahim Mehdi, Nabil Kherrouba, Mohammad Jahazi. 2022 « Effect of plastic anisotropy on the kinetics of static softening in AA2024-T3 aluminum alloy ». Metals and Materials International vol. 28. p. 2042-2058
Maryam Jamshidi, Jean-François Chatelain, Xavier Rimpault, Marek Balazinski. 2022 « Tool condition monitoring based on the fractal analysis of current and cutting force signals during CFRP trimming ». International Journal of Advanced Manufacturing Technology vol. 121 , nº 11-12. p. 8127-8142
Maryam Jamshidi, Jean-François Chatelain, Xavier Rimpault, Marek Balazinski. 2022 « Tool condition monitoring using machine tool spindle electric current and multiscale analysis while milling steel alloy ». Journal of Manufacturing and Materials Processing vol. 6 , nº 5
Kianoosh Kaveh, Jean-Benoit Morin, Mohammad Jahazi, Elmira Moosavi-Khoonsari. 2022 « Post-mortem study of magnesia-carbon refractory bricks exposed to thermal radiation in electric arc furnace steelmaking ». 8th International Congress on the Science and Technology of Steelmaking (ICS) (Montreal, QC, Canada, Aug. 02-04, 2022) Association for Iron & Steel Technology
M. Kavyani, G. R. Ebrahimi, H. R. Ezatpour, M. Jahazi. 2022 « Microstructure refinement, mechanical and biocorrosion properties of Mg–Zn–Ca–Mn alloy improved by a new severe plastic deformation process ». Journal of Magnesium and Alloys vol. 10 , nº 6. p. 1640-1662
N. Khoddammohammadi, S. Nadeau. 2022 « Integration of traditional, automatized and intelligent technologies in manufacturing: Towards the integration of smart glasses ». Affiche présentée lors de la conférence : Congrès CARWH (En ligne, 15-16 sept. 2022)
Jules Kouam, Victor Songmene, Ali Bahloul, Agnes M. Samuel. 2022 « Characterization of Si and SiO2 in dust emitted during granite polishing as a function of cutting conditions ». Materials vol. 15 , nº 11
David Langlais, Vincent Demers, Vladimir Brailovski. 2022 « Rheology of dry powders and metal injection molding feedstocks formulated on their base ». Powder Technology vol. 396 , nº Part A. p. 13-26
Abdelhalim Loucif, Zhang Chunping, Jean-Benoît Morin, Mohammad Jahazi. 2022 « A FEM analysis on the influence of manganese on carbon and chromium macrosegregation in large size steel ingot ». 10th International Conference on Material Science and Engineering Technology (ICMSET 2021)), the 5th International Conference on Building Materials and Materials Engineering (ICBMM 2021), and the 6th International Conference on Materials Technology and Ap Trans Tech Publications
M. G. Mahmoud, Y. Zedan, A. M. Samuel, H. W. Doty, V. Songmene, F. H. Samuel. 2022 « Effect of rare earth metals (Ce and La) addition on the performance of Al-Si-Cu-Mg Cast Alloys ». International Journal of Metalcasting vol. 16 , nº 3. p. 1164-1190
M. G. Mahmoud, Y. Zedan, A. M. Samuel, V. Songmene, F. H. Samuel. 2022 « The use of rare earth metals in AlSiCu casting alloys ». International Journal of Metalcasting vol. 16 , nº 2. p. 535-552
Seyed Mohammad Majdi, Atefeh Ayatollahi Tafti, Vincent Demers, Guillem Vachon, Vladimir Brailovski. 2022 « Effect of powder particle shape and size distributions on the properties of low-viscosity iron-based feedstocks used in low-pressure powder injection moulding ». Powder Metallurgy vol. 65 , nº 2. p. 170-180
Mohammad Maroufkhani, Alireza Khodabandeh, Iulian Radu, Mohammad Jahazi. 2022 « Pitting corrosion resistance of the 316L stainless steel welds: influenced of oxygen content in the protective gas ». Canadian Society for Mechanical Engineering International Congress (Alberta, AB, Canada, 7-8 juin 2022) Canadian Society for Mechanical Engineering (CSME)
Mahdi Masoumi Khalilabad, Yasser Zedan, Damien Texier, Mohammad Jahazi, Philippe Bocher. 2022 « Effect of heat treatments on microstructural and mechanical characteristics of dissimilar friction stir welded 2198/2024 aluminum alloys ». Journal of Adhesion Science and Technology vol. 36 , nº 3. p. 221-239
Ronan Mathieu, Mohamed Ali Charfi, Jean-François Chatelain, Claudiane Ouellet-Plamondon, Roger Serra, Gilbert Lebrun. 2022 « Effect of graphene additive on cutting forces and temperature during the trimming process of CFRP ». International Journal of Advanced Manufacturing Technology vol. 122 , nº 9-10. p. 3969-3981
Ahlem Mechta, Mohamed Slamani, Moussa Zaoui, Jean-François Chatelain. 2022 « A comparative evaluation of the performance of three CNC machine tools ». ICAENS : 3rd International Conference on Applied Engineering and Natural Sciences ICAENS : Proceedings Book (Konya, Turkey, July 20-23, 2022)
Ahlem Mechta, Mohamed Slamani, Moussa Zaoui, René Mayer, Jean-François Chatelain. 2022 « Correlation assessment and modeling of intra-axis errors of prismatic axes for CNC machine tools ». International Journal of Advanced Manufacturing Technology vol. 120. p. 5093-5115
Olivier Miclette, Raphaël Côté, Vincent Demers, Vladimir Brailovski. 2022 « Material extrusion additive manufacturing of low-viscosity metallic feedstocks: Performances of the plunger-based approach ». Additive Manufacturing vol. 60 , nº Part A
Alimeh Modifi Naeini, Sylvie Nadeau. 2022-05-23 « Approches systémiques d’analyse des risques en fabrication numérique ». Substance ÉTS
Alimeh Modifi Naeini, Sylvie Nadeau. 2022-05-23 « Systemic Approaches to Risk Analysis in Digital Manufacturing ». Substance ÉTS
A. Mofidi Naeini, S. Nadeau. 2022 « Comparing FRAM and STAMP for occupational health and safety (OHS) and operational risks analysis: The case of data gloves in assembly 4.0 production ». Affiche présentée lors de la conférence : 33rd International Congress on Occupational Health (ICOH) (Melbourne, Australia ; Rome, Italy - En ligne, Feb. 06-10, 2022)
Alimeh Mofidi Naeini, Sylvie Nadeau. 2022 « A review if the application of FRAM and STAMP approaches combined with other methods ». Human Factors and Systems Interaction. AHFE (2022) International Conference (New-York, NY, USA, July 24-28, 2022) AHFE International
Alimeh Mofidi Naeini, Sylvie Nadeau. 2022 « STPA systemic approach for OHS and operational risk analysis of data glove use in 4.0 assembly ». CIRP Journal of Manufacturing Science and Technology vol. 39. p. 317-331
J. Montlahuc, A. Polette, A. Tahan, J. P. Pernot, L. Rivest. 2022 « Multi-source point cloud semantic segmentation using neural network ». 2022 24th ISPRS Congress on Imaging Today, Foreseeing Tomorrow, Commission III (Nice, France, June 06-11, 2022) International Society for Photogrammetry and Remote Sensing
S. Nadeau, L. Hof, K. Landau. 2022 « Les systèmes d'assistance numérique au service de la diversité ». Communication lors de la conférence : Congrès de l'AQHSST (Sherbrooke, QC, Canada, 11-13 mai 2022)
Alimeh Mofidi Naeini, Sylvie Nadeau. 2022 « Application of FRAM to perform risk analysis of the introduction of a data glove to assembly tasks ». Robotics and Computer-Integrated Manufacturing vol. 74
Alimeh Mofidi Naeini, Sylvie Nadeau. 2022 « Comparing FRAM and STAMP for occupational health and safety (OHS) and operational risks analysis: The case of data gloves in assembly 4.0 production ». Safety and Health at Work vol. 13. p. S89
M. Raya, S. Nadeau. 2022 « Transformation 5.0 : modèles de maturité technologiques ». Affiche présentée lors de la conférence : Deuxième Forum international sur l’innovation 5.0 (Montréal, QC, Canada, 9 nov. 2022)
Morteza Sadeghifar, Mahshad Javidikia, Victor Songmene, Mohammad Jahazi. 2022 « A comparative analysis of chip shape, residual stresses, and surface roughness in minimum-quantity-lubrication turning with various flow rates ». International Journal of Advanced Manufacturing Technology vol. 121 , nº 5-6. p. 3977-3987
Mohammad Saleh Meiabadi, Mahmoud Moradi, Afshin Kazerooni, Vincent Demers. 2022 « Multi-objective optimisation of plastic injection moulding process using mould flow analysis and response surface methodology ». International Journal of Materials and Product Technology vol. 64 , nº 2. p. 140-155
S. Salem, M. Hamed, Y. Zedan, A. M. Samuel, H. W. Doty, V. Songmene, F. H. Samuel. 2022 « Evolution and methods of residual stresses measurement in Al-Si-Cu-Mg Castings : Role of heat treatment ». International Journal of Metalcasting vol. 16 , nº 3. p. 1488-1506
A. M. Samuel, Y. Zedan, H. W. Doty, V. Songmene, F. H. Samuel. 2022 « Role of the addition of La and Ce on the cooling characteristics and porosity formation in A356 and A413 alloys ». International Journal of Metalcasting vol. 16 , nº 2. p. 553-572
Ehab Samuel, Ahmed M. Nabawy, Agnes M. Samuel, Herbert W. Doty, Victor Songmene, Fawzy H. Samuel. 2022 « Effect of Zr and Ti addition and aging treatment on the microstructure and tensile properties of Al-2%Cu-based alloys ». Materials vol. 15 , nº 13
H. Shahmiri, M. Viens. 2022 « Nondestructive evaluation of electroplating-induced hydrogen embrittlement in cadmium-coated high-strength steel using ultrasonic surface waves ». Materials Evaluation vol. 79 , nº 11. p. 1094-1104
Hussein Slim, Sylvie Nadeau. 2022-03-28 « Combiner l’analyse de la résonance fonctionnelle à la logique floue ». Substance ÉTS
Hussein Slim, Sylvie Nadeau. 2022-03-28 « Combining Functional Resonance Analysis Method with Fuzzy Logic ». Substance ÉTS
Mahmoud Alipour Sougavabar, Seyed Ali Niknam, Behnam Davoodi, Victor Songmene. 2022 « Milling Al520-MMC reinforced with SiC particles and additive elements Bi and Sn ». Materials vol. 15 , nº 4
Jagannadh Sripada, Yuan Tian, Kanwal Chadha, Gobinda Saha, Mohammad Jahazi, John Spray, Clodualdo Aranas. 2022 « Effect of hot isostatic pressing on microstructural and micromechanical properties of additively manufactured 17–4PH steel ». Materials Characterization vol. 192
Seyedmohammad Tabaie, Farhad Rezai-Aria, Bertrand C. D. Flipo, Mohammad Jahazi. 2022 « Dissimilar linear friction welding of selective laser melted Inconel 718 to forged Ni-based superalloy AD730: Evolution of strengthening phases ». Journal of Materials Science and Technology vol. 96. p. 248-261
Zakaria Ahmed M. Tagiuri, Thien-My Dao, Agnes Marie Samuel, Victor Songmene. 2022 « A numerical model for predicting the effect of tool nose radius on machining process performance during orthogonal cutting of AISI 1045 Steel ». Materials vol. 15 , nº 9
Zakaria Ahmed M. Tagiuri, Thien-My Dao, Agnes Marie Samuel, Victor Songmene. 2022 « Numerical prediction of the performance of chamfered and sharp cutting tools during orthogonal cutting of AISI 1045 steel ». Processes vol. 10 , nº 11
Christian Tiaya Tedonchio, Sylvie Nadeau, Conrad Boton, Louis Rivest. 2022 « Digital mock-ups as support tools for preventing risks related to energy sources in the operation stage of industrial facilities through design ». Results in Engineering vol. 16
Yaniel Torres, Sylvie Nadeau, Kurt Landau. 2022 « Analysis of assembly errors using systems thinking approach: Application of the HFACS framework ». Human Error, Reliability, Resilience, and Performance. AHFE (2022) International Conference (New-York, NY, USA, July 24-28, 2022) AHFE International
Yaniel Torres, Sylvie Nadeau, Kurt Landau. 2022 « Applying AcciMap and STAMP to the analysis of human error in complex manual assembly ». Human Factors and Ergonomics in Manufacturing & Service Industries vol. 32 , nº 6. p. 462-481
Ali Vedaei-Sabegh, Jean-Benoît Morin, Henri Champliaud, Mohammad Jahazi. 2022 « Influence of thermally grown oxides on interfacial friction during hot deformation of large-size forging ingots ». Journal of Materials Research and Technology vol. 21. p. 3412-3424
Ali Vedaei-Sabegh, Jean-Benoît Morin, Mohammad Jahazi. 2022 « Influence of thermally grown oxide layers thickness on temperature evolution during the forging of large size steel ingots ». Materials Chemistry and Physics vol. 275
Y. Zedan, V. Songmene, A. M. Samuel, F. H. Samuel, H. W. Doty. 2022 « Effects of free-cutting elements addition on the microstructure, hardness, and machinability of Al-11%Si-Cu-Mg casting alloys ». International Journal of Metalcasting vol. 16 , nº 4. p. 1915-1931
Yasser Zedan, Guillermo H. Garza-Elizondo, Mahmoud Tash, Agnes M. Samuel, Herbert W. Doty, Victor Songmene, Fawzy Hosny Samuel. 2022 « Effect of intermetallics and drill materials on the machinability of Al-Si cast alloys ». Materials vol. 15 , nº 3
Yasser Zedan, Agnes M. Samuel, Herbert W. Doty, Victor Songmene, Fawzy H. Samuel. 2022 « Effects of trace elements on the microstructural and machinability characteristics of AlSiCuMg castings ». Materials vol. 15 , nº 1
Yasser Zedan, Victor Songmene, Agnes M. Samuel, Fawzy H. Samuel, Herbert W. Doty. 2022 « Assessment of the influence of additives on the mechanical properties and machinability of Al-11%Si cast alloys: Application of DOE and ANOVA methods ». Materials vol. 15 , nº 9
Chunping Zhang, Abdelhalim Loucif, Mohammad Jahazi, Jean-Benoit Morin. 2022 « FE modelling and prediction of macrosegregation patterns in large size steel ingots: Influence of filling rate ». Metals vol. 12 , nº 1

Mustapha Arslane, Mohamed Slamani, Jean-François Chatelain. 2021 « Development and validation of a machining fixture for complex-shaped components based on Pluckerian matrix approach and SDT concept ». International Journal of Advanced Manufacturing Technology vol. 114. p. 1697-1716
Mohamed Azzouni, Vincent Demers, Louis Dufresne. 2021 « Mold filling simulation and experimental investigation of metallic feedstock used in low-pressure powder injection molding ». International Journal of Material Forming vol. 14 , nº 5. p. 961-972
Haithem Bahri, Victor Songmene, Jules Kouam, Agnes Marie Samuel, Fawzy Hosny Samuel. 2021 « CNC edge finishing of granite: Effect of machining conditions on part quality, cutting forces, and particle emissions ». Materials vol. 14 , nº 21
Mohammad Ebrahim Bajgholi, Gilles Rousseau, Martin Viens, Denis Thibault. 2021 « Capability of advanced ultrasonic inspection technologies for hydraulic turbine runners ». Applied Sciences vol. 11 , nº 10
Nima Bohlooli Arkhazloo, Farzad Bazdidi-Tehrani, Jean-Benoît Morin, Mohammad Jahazi. 2021 « Optimization of furnace residence time and loading pattern during heat treatment of large size forgings ». International Journal of Advanced Manufacturing Technology vol. 113 , nº 9-10. p. 2447-2460
Conrad Boton, Louis Rivest, Oussama Ghnaya, Moataz Chouchen. 2021 « What is at the Root of Construction 4.0: A systematic review of the recent research effort ». Archives of Computational Methods in Engineering vol. 28 , nº 4. p. 2331-2350
Yassine Bouissa, Muftah Zorgani, Davood Shahriari, Henri Champliaud, Jean-Benoît Morin, Mohammad Jahazi. 2021 « Microstructure-based FEM modeling of phase transformation during quenching of large-size steel forgings ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 52 , nº 5. p. 1883-1900
Mario Bourgault, Robert Pellerin, Conrad Boton, Ivanka Iordanova, Louis Rivest, Christophe Danjou, Nathalie Perrier, Daniel Forgues, Erik Poirier, Laurent Joblot. 2021 « Transformer le secteur de la construction par le numérique : Un chantier ambitieux et nécessaire ». In Le Québec économique 9 : Perspectives et défis de la transformation numérique. p. 433-456. Cirano
Arquimedes Castillo-Morales, Xavier Rimpault, Jean-François Chatelain, Gilbert Lebrun. 2021 « Temperature study during the edge trimming of carbon fiber-reinforced plastic [0]8 /ti6al4v stack material ». Journal of Composites Science vol. 5 , nº 5
K. Chadha, C. Aranas, M. Jahazi. 2021 « Effect of double hit hot deformation on the evolution of dynamically transformed ferrite ». Metals and Materials International vol. 27 , nº 11. p. 4307-4321
Bruno Cognet, Jean-Philippe Pernot, Louis Rivest, Christophe Danjou. 2021 « Digital maturity models: Comparing manual and semi-automatic similarity assessment frameworks ». International Journal of Product Lifecycle Management vol. 13 , nº 4. p. 291-316
Raphaël Côté, Mohamed Azzouni, Vincent Demers. 2021 « Impact of binder constituents on the moldability of titanium-based feedstocks used in low-pressure powder injection molding ». Powder Technology vol. 381. p. 255-268
Raphaël Côté, Mohamed Azzouni, Oussema Ghanmi, Sarthak Kapoor, Vincent Demers. 2021 « Impact of rheological model on numerical simulation of low-pressure powder injection moulding ». Powder Metallurgy vol. 64 , nº 1. p. 8-16
Vincent Demers. 2021 « Review of low-pressure powder injection molding process ». Proceedings of the 2021 International Conference on Powder Metallurgy & Particulate Materials (PowderMet2021) (Orlando, FL, USA, June 20-23, 2021) Metal Powder Industries Federation
Vincent Demers, Simon Lamarre, Jean-François Chatelain. 2021-02-16 « Low-pressure powder injection molding machine, kit and method ». US 10,919,092.
S. Dourandish, M. Jahazi, G. R. Ebrahimi, L. Ebacher. 2021 « Influence of eutectic phase precipitation on cracking susceptibility during forging of a martensitic stainless steel for turbine shaft applications ». Journal of Materials Research and Technology vol. 13. p. 260-270
Frederic Dupont-Marillia, Mohammad Jahazi, Pierre Belanger. 2021 « Phased array probe for the inspection of large steel forgings ». Cogent Engineering vol. 8 , nº 1
Tarek Elgnemi, Victor Songmene, Jules Kouam, Martin B. G. Jun, Agnes Marie Samuel. 2021 « Experimental investigation on dry routing of CFRP composite: Temperature, forces, tool wear, and fine dust emission ». Materials vol. 14 , nº 19
Tarek-Shaban-Mohamed Elgnemi, Martin Byung-Guk Jun, Victor Songmene, Agnes Marie Samuel. 2021 « Milling performance of CFRP composite and atomised vegetable oil as a function of fiber orientation ». Materials vol. 14 , nº 8
Adriana Eres-Castellanos, Javier Hidalgo, Muftah Zorgani, Mohammad Jahazi, Isaac Toda-Caraballo, Francisca G. Caballero, Carlos Garcia-Mateo. 2021 « Assessing the scale contributing factors of three carbide-free bainitic steels: A complementary theoretical and experimental approach ». Materials and Design vol. 197
Eslam M. Fayed, Mohammad Saadati, Davood Shahriari, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2021 « Effect of homogenization and solution treatments time on the elevated-temperature mechanical behavior of Inconel 718 fabricated by laser powder bed fusion ». Scientific Reports vol. 11 , nº 1
Eslam M. Fayed, Mohammad Saadati, Davood Shahriari, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2021 « Optimization of the post-process heat treatment of inconel 718 superalloy fabricated by laser powder bed fusion process ». Metals vol. 11 , nº 1
B. V. Feujofack Kemda, N. Barka, M. Jahazi, D. Osmani. 2021 « Modeling of phase transformation kinetics in resistance spot welding and investigation of effect of post weld heat treatment on weld microstructure ». Metals and Materials International vol. 27 , nº 5. p. 1205-1223
O. Ghanmi, V. Demers. 2021 « Molding properties of titanium-based feedstock used in low-pressure powder injection molding ». Powder Technology vol. 379. p. 515-525
Mahshad Javidikia, Morteza Sadeghifar, Victor Songmene, Mohammad Jahazi. 2021 « 3D FE modeling and experimental analysis of residual stresses and machining characteristics induced by dry, MQL, and wet turning of AA6061-T6 ». Machining Science and Technology vol. 25 , nº 6. p. 957-983
Mahshad Javidikia, Morteza Sadeghifar, Victor Songmene, Mohammad Jahazi. 2021 « Analysis and optimization of surface roughness in turning of AA6061-T6 under various environments and parameters ». 9th CIRP Conference on High Performance Cutting (En ligne, May 24-26, 2021) Elsevier
Mahshad Javidikia, Morteza Sadeghifar, Victor Songmene, Mohammad Jahazi. 2021 « Low and high speed orthogonal cutting of AA6061-T6 under dry and flood-coolant modes: Tool wear and residual stress measurements and predictions ». Materials vol. 14 , nº 15
Makarim Khan, Davood Shahriari, Mohammad Jahazi, Jean-Benoit Morin. 2021 « Interactions between dynamic softening and strengthening mechanisms during hot forging of a high-strength steel ». Frontiers in Mechanical Engineering vol. 7
Kurt Landau, Sylvie Nadeau, Hamed Salmanzadeh, Bettina Abendroth. 2021 « „Große Arbeitsobjekte“ in Flugzeugbau und -wartung ». Herbstkonferenz der Gesellschaft für Arbeitswissenschaft : Zeitbezug und Transformation – Ergonomie im Wandel des Fortschritts (Friedrichshafen, Germany, Sept. 23-24, 2021) GFA Press
Kurt Landeau, Sylvie Nadeau. 2021 « Kontrolle der Flugzeugenteisung unter widrigen physikalisch-chemischen Umgebungsbedingungen ». ASU Arbeitsmed Sozialmed Umweltmed vol. 56 , nº 11. p. 717-721
T. Le Floch, S. Nadeau, F. Morency, K. Landau. 2021 « Identification of physically fatiguing tasks performed during aircraft open-basket ground de-icing activities ». Work: A Journal of Prevention, Assessment & Rehabilitation vol. 68 , nº 3. p. 789-796
J. H. Liu, N. Binot, D. Delagnes, M. Jahazi. 2021 « Influence of the cooling rate below Ms on the martensitic transformation in a low alloy medium-carbon steel ». Journal of Materials Research and Technology vol. 12. p. 234-242
Abdelhalim Loucif, Jean Benoit Morin, Louis Philippe Lapierre-Boire, Mohammad Jahazi. 2021 « Subsurface crack initiation and propagation in an open dieforged high strength steel: A microstructural analysis ». 9th International Conference on Engineering and Innovative Materials (ICEIM 2020) (Singapor, Singapor, Sept. 4-6, 2020) Trans Tech Publications Ltd
Alexandre Macloud, Ali Zeighami, Rachid Aissaoui, Louis Rivest. 2021 « Extracting grasping cues from pistol-shaped tools for digital human models ». Computer-Aided Design and Applications vol. 18 , nº 6. p. 1167-1185
Mohsen Marani, Mohammadjavad Zeinali, Victor Songmene, Chris K. Mechefske. 2021 « Tool wear prediction in high-speed turning of a steel alloy using long short-term memory modelling ». Measurement: Journal of the International Measurement Confederation vol. 177. p. 704-713
A. Mofidi Naeini, S. Nadeau. 2021 « Data gloves in manufacturing, a review of OHS and operational concerns ». Communication lors de la conférence : 42e Congrès AQHSST : Unir la diversité pour une culture en santé (En ligne, 5 mai 2021)
Alimeh Mofidi Naeini, Sylvie Nadeau. 2021 « FRAM and STAMP new avenue for risk analysis of manufacturing in the context of industry 4.0 ». Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Bochum, Germany, Mar. 03-05, 2021) GfA-Press
Alliche Mohamed-Amine, Djennane Mohamed, Djebara Abdelhakim, Victor Songmene. 2021 « Predictive analytical modeling of thermo-mechanical effects in orthogonal machining ». Materials vol. 14 , nº 24
Mahmoud Moradi, Mohammad Saleh Meiabadi, Vincent Demers. 2021 « A numerical investigation of friction stir welding parameters in joining dissimilar aluminium alloys using finite element method ». International Journal of Manufacturing Research vol. 16 , nº 1. p. 32-51
S. Nadeau, R. Bruder, L. Hof. 2021 « Using Smart Glasses in assembly/disassembly: Current state of the art ». Travail et Santé vol. 37 , nº 2. p. 2-6
Sylvie Nadeau. 2021 « Acceptabilité sociale ou pratique? De quoi parle-t-on? ». Travail et Santé vol. 37 , nº 1. p. 21
Roghayeh Nikbakht, Mohammad Saadati, Taek-Soo Kim, Mohammad Jahazi, Hyoung Seop Kim, Bertrand Jodoin. 2021 « Cold spray deposition characteristic and bonding of CrMnCoFeNi high entropy alloy ». Surface and Coatings Technology vol. 425
Oluwole Olufayo, Victor Songmene, Jean-Pierre Kenné, Michael Ayomoh. 2021 « Modelling for cost and productivity optimisation in sustainable manufacturing: a case of dry versus wet machining of mould steels ». International Journal of Production Research vol. 59 , nº 17. p. 5352-5371
Agnes Samuel, Yasser Zedan, Herbert Doty, Victor Songmene, Fawzy H. Samuel. 2021 « A review study on the main sources of porosity in Al-Si cast alloys ». Advances in Materials Science and Engineering vol. 2021
Mohamed Slamani, Jean-Francois Chatelain, Alexandre Il, Marek Balazinski. 2021 « Statistical analysis and modeling of temperature distribution during various milling operations of thin walled aircraft parts ». Physica A: Statistical Mechanics and its Applications vol. 570
Mohamed Slamani, Nouha Karabibene, Jean-François Chatelain, Yves Beauchamp. 2021 « Edge trimming of flax fibers and glass fibers reinforced polymers composite – An experimental comparative evaluation ». International Journal of Material Forming vol. 14 , nº 6. p. 1497-1510
Mohamed Slamani, Nouha Karabibene, Jean-Francois Chatelain, Xavier Rimpault, Yves Beauchamp. 2021 « Statistical analysis of surface roughness during high speed edge trimming of flax-fiber composite based on the Split-Split plot randomized complete block design ». Measurement: Journal of the International Measurement Confederation vol. 184
Hussein Slim, Sylvie Nadeau. 2021 « The application of Rough Sets Theory as a data-mining tool to classify complex functions in safety management ». Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Bochum, Germany, Mar. 03-05, 2021) GfA-Press
Seyedmohammad Tabaie, Farhad Rezai-Aria, Bertrand C. D. Flipo, Jonathan Cormier, Mohammad Jahazi. 2021 « Post-weld heat treatment of additively manufactured inconel 718 welded to forged ni-based superalloy AD730 by linear friction welding ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 52 , nº 8. p. 3475-3488
Seyedmohammad Tabaie, Farhad Rézaï-Aria, Bertrand C. D. Flipo, Mohammad Jahazi. 2021 « Grain size and misorientation evolution in linear friction welding of additively manufactured IN718 to forged superalloy AD730™ ». Materials Characterization vol. 171
Atefeh A. Tafti, Vincent Demers, Seyed M. Majdi, Guillem Vachon, Vladimir Brailovski. 2021 « Effect of thermal debinding conditions on the sintered density of low-pressure powder injection molded iron parts ». Metals vol. 11 , nº 2
Atefeh A. Tafti, Vincent Demers, Guillem Vachon, Vladimir Brailovski. 2021 « Effect of binder constituents and solids loading on the rheological behavior of irregular iron-based feedstocks ». Journal of Manufacturing Science and Engineering vol. 143 , nº 3
Christian Tiaya Tedonchio, Sylvie Nadeau, Conrad Boton, Louis Rivest. 2021 « BIM and PLM-based management of occupational health and safety: A comparative literature review ». Proceedings of the 38th International Conference of CIB W78 (Luxembourg, Oct. 13-15, 2021)
Yaniel Torres, Sylvie Nadeau, Kurt Landau. 2021 « Application of SHERPA (Systematic Human Error Reduction and Prediction Approach) as an alternative to predict and prevent human error in manual assembly ». Proceedings of the 21st Congress of the International Ergonomics Association (IEA 2021). IEA 2021 : Volume III: Sector Based Ergonomics (Vancouver, BC, Canada, June 13-18, 2021) Springer
Yaniel Torres, Sylvie Nadeau, Kurt Landau. 2021 « Classification and quantification of human error in manufacturing: A case study in complex manual assembly ». Applied Sciences vol. 11 , nº 2
Yaniel Torres, Sylvie Nadeau, Kurt Landau. 2021 « Evaluation of fatigue and workload among workers conducting complex manual assembly in manufacturing ». IISE Transactions on Occupational Ergonomics and Human Factors vol. 9 , nº 1. p. 49-63
Yaniel Torres, Sylvie Nadeau, Kurt Landau. 2021 « Evaluation of shift work scheduling and overtime allocation practices using the HSE Fatigue Index: application on complex manual assembly ». Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Bochum, Germany, Mar. 03-05, 2021) GfA-Press
Yaniel Torres Medina, Sylvie Nadeau, Kurt Landau. 2021-06-30 « Fabrication aérospatiale : horaires, heures supplémentaires et fatigue ». Substance ÉTS
Yaniel Torres Medina, Sylvie Nadeau, Kurt Landau. 2021-06-30 « Work Schedules, Overtime, and Fatigue in Aerospace Manufacturing ». Substance ÉTS
Dinh Son Tran, Victor Songmene, Anh Dung Ngo. 2021 « Regression and ANFIS-based models for predicting of surface roughness and thrust force during drilling of biocomposites ». Neural Computing and Applications vol. 33. p. 11721-11738
K. Xing, X. Rimpault, J. R. R. Mayer, J. F. Chatelain, S. Achiche. 2021 « Quantitative assessment of machine tools precision states through fractal analysis of machine error parameters ». 14th International Conference on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance (LAMDAMAP) (En ligne, Mar. 10-11, 2021) euspen
Yasser Zedan, Keyhan Jabbari, Seyed A. Niknam, Victor Songmene. 2021 « Machinability study of AA6061 under various heat treatment conditions ». Iranian Journal of Science and Technology - Transactions of Mechanical Engineering vol. 45. p. 543-553
Y. Zedan, M. Iben Houria, N. Vanderesse, F. Atmani, F. Mirakhorli, F. Nadeau, V. Demers, P. Bocher. 2021 « Fatigue properties of continuous wave and pulsed wave laser cold-wire welding of thick section AA6005-T6 aluminum alloys ». International Journal of Fatigue vol. 147
M. Zorgani, C. Garcia-Mateo, M. Jahazi. 2021 « Effects of ausforming temperature on carbide-free bainite transformation and its correlation to the transformation plasticity strain in a medium C- Si-rich steel ». Materials Characterization vol. 176
M. Zorgani, C. Garcia-Mateo, M. Jahazi. 2021 « Microstructural evolution during tempering of an ausformed carbide-free low temperature bainitic steel ». Materials and Design vol. 210

M. Zaid Ahmed, K. Chadha, S. R. Reddy, D. Shahriari, P. P. Bhattacharjee, M. Jahazi. 2020 « Influence of process parameters on microstructure evolution during hot deformation of a Eutectic High-Entropy Alloy (EHEA) ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 51 , nº 12. p. 6406-6420
Alireza Aleyari, Omid Majidi, Nicolas Bombardier, Xuan-Tan Pham, Mohammad Jahazi. 2020 « Finite element and experimental analysis of the preheating stage of High Speed Blow Forming (HSBF) process ». Journal of Manufacturing Processes vol. 49. p. 10-17
Ghalya Ali, Vincent Demers, Raphaël Côté, Nicole R. Demarquette. 2020 « Threshold concentration of surfactant agent in feedstocks used for low-pressure powder injection molding ». Materials Performance and Characterization vol. 9 , nº 4
Augias Anagonou, Thierry Godjo, Victor Songmene, Yvette Tankpinou. 2020 « Étude des propriétés physico-mécaniques d’un béton hydraulique contenant des cendres de coques d’anacarde de tailles micrométriques et nanométriques substituant partiellement le ciment ». Déchets Sciences et Techniques , nº 83. p. 39-48
Augias Anagonou, Victor Songmene, Thierry Godjo, Jules Kouam. 2020 « Recycling of West african cashew nut shells waste in asphalt concrete: Impact on the physico-mechanical properties of asphalt concrete ». International Journal of Advanced Research and Publications vol. 4 , nº 2. p. 96-106
Mohammad E. Bajgholi, Gilles Rousseau, Martin Viens, Denis Thibault. 2020 « Performance of Ultrasonic Inspection on hydroelectric turbine runner ». Communication lors de la conférence : 3rd International Symposium on Structural Health Monitoring and Nondestructive Testing (Québec, QC, Canada, Nov. 25-26, 2020)
Mohamed Aziz Ben Trad, Vincent Demers, Raphaël Côté, Mehran Sardarian, Louis Dufresne. 2020 « Numerical simulation and experimental investigation of mold filling and segregation in low-pressure powder injection molding of metallic feedstock ». Advanced Powder Technology vol. 31 , nº 3. p. 1349-1358
Y. Bouissa, N. Bohlooli, D. Shahriari, H. Champliaud, J. B. Morin, M. Jahazi. 2020 « FEM modeling and experimental validation of quench-induced distortions of large size steel forgings ». Journal of Manufacturing Processes vol. 58. p. 592-605
Frédéric Bédard, Mohammad Jahazi, Victor Songmene. 2020 « Die-sinking EDM of Al6061-T6: interactions between process parameters, process performance, and surface characteristics ». International Journal of Advanced Manufacturing Technology vol. 107 , nº 1-2. p. 333-342
Thiago Bruno Carneiro, Samuel Filgueiras Rodrigues, Clodualdo Aranas, Fulvio Siciliano, Eden Santos Silva, Gedeon Silva Reis, Edson Jansen Pedrosa Miranda, Valdemar Silva Leal, Mohammad Jahazi, John Joseph Jonas. 2020 « Retransformation of dynamically induced ferrite during physical simulation of Steckel mill hot rolling ». Journal of Materials Research and Technology vol. 9 , nº 5. p. 10254-10264
K. Chadha, C. Aranas, D. Shahriari, M. Jahazi, J. G. Spray. 2020 « The effect of retained work hardening on the driving force for dynamic transformation ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 51 , nº 11. p. 5617-5622
Oussama Chaieb, Oluwole A. Olufayo, Victor Songmene, Mohammad Jahazi. 2020 « Investigation on surface quality of a rapidly solidified Al–50%Si alloy component for deep-space applications ». Materials vol. 13 , nº 15
A. Chamanfar, S. M. Chentouf, M. Jahazi, L. P. Lapierre-Boire. 2020 « Austenite grain growth and hot deformation behavior in a medium carbon low alloy steel ». Journal of Materials Research and Technology vol. 9 , nº 6. p. 12102-12114
Olivier Champagne, Xuan-Tan Pham. 2020 « Numerical simulation of moving heat source in arc welding using the Element-free Galerkin method with experimental validation and numerical study ». International Journal of Heat and Mass Transfer vol. 154
Mohamed Ali Charfi, Ronan Mathieu, Jean-François Chatelain, Claudiane Ouellet-Plamondon, Gilbert Lebrun. 2020 « Effect of graphene additive on flexural and interlaminar shear strength properties of carbon fiber-reinforced polymer composite ». Journal of Composites Science vol. 4 , nº 4
M. Chegini, M. R. Aboutalebi, S. H. Seyedein, G. R. Ebrahimi, M. Jahazi. 2020 « Study on hot deformation behavior of AISI 414 martensitic stainless steel using 3D processing map ». Journal of Manufacturing Processes vol. 56. p. 916-927
Dinh-Dong Dang, Xuan-Tan Pham, Chi-Cong Nguyen. 2020 « Thermal performance prediction in the air gap of a rotor-stator configuration: effects of numerical models ». Journal of Thermal Science and Engineering Applications vol. 29 , nº 1. p. 206-218
M. Esouilem, H. A. Bouzid, S. Nadeau. 2020 « Frequency failure causes analysis of pressure vessel and piping equipment: case study of the Alberta Petrochemical Industry ». ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering vol. 6 , nº 4
Eslam M. Fayed, Davood Shahriari, Mohammad Saadati, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2020 « Influence of homogenization and solution treatments time on the microstructure and hardness of Inconel 718 fabricated by laser powder bed fusion process ». Materials vol. 13 , nº 11
B. V. Feujofack Kemda, Noureddine Barka, M. Jahazi, D. Osmani. 2020 « Optimization of resistance spot welding process applied to A36 mild steel and hot dipped galvanized steel based on hardness and nugget geometry ». International Journal of Advanced Manufacturing Technology vol. 106 , nº 5-6. p. 2477-2491
Seyedmorteza Ghaffarishahri, Louis Rivest. 2020 « Feature recognition for structural aerospace sheet metal parts ». Computer-Aided Design and Applications vol. 17 , nº 1. p. 16-43
Seyedmorteza Ghaffarishahri, Louis Rivest. 2020 « Feature-based model difference identification for aerospace sheet metal parts ». Computer-Aided Design and Applications vol. 18 , nº 3. p. 443-467
Aurélie Jafflin, Sylvie Nadeau. 2020 « Identifying OHS hazards in university research laboratories from an ergonomics and human factors perspective ». Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Berlin, Germany, March 16-18, 2020) GfA-Press
Maryam Jamshidi, Xavier Rimpault, Marek Balazinski, Jean-François Chatelain. 2020 « Fractal analysis implementation for tool wear monitoring based on cutting force signals during CFRP/titanium stack machining ». International Journal of Advanced Manufacturing Technology vol. 106 , nº 9-10. p. 3859-3868
Mahshad Javidikia, Morteza Sadeghifar, Victor Songmene, Mohammad Jahazi. 2020 « 3D Finite element simulation of residual stresses induced by wet turning of AA6061-T6 ». Affiche présentée lors de la conférence : 17th Encyclopaedia Archives Encyclopaedia of Research on Aluminium in Québec REGAL Students' Day = 17e Encyclopédie de la Recherche sur l’Aluminium au Québec : Journée des étudiants du REGAL (En ligne, Nov. 05-06, 2020)
Mahshad Javidikia, Morteza Sadeghifar, Victor Songmene, Mohammad Jahazi. 2020 « Effect of turning environments and parameters on surface integrity of AA6061-T6: experimental analysis, predictive modeling, and multi-criteria optimization ». International Journal of Advanced Manufacturing Technology vol. 110 , nº 9. p. 2669-2683
Mahshad Javidikia, Morteza Sadeghifar, Victor Songmene, Mohammad Jahazi. 2020 « On the impacts of tool geometry and cutting conditions in straight turning of aluminum alloys 6061-T6: an experimentally validated numerical study ». International Journal of Advanced Manufacturing Technology vol. 106 , nº 9-10. p. 4547–4565
K. Landau, S. Nadeau. 2020 « Comparison of different parameters of heart rate frequency of tasks performed during aircraft open-basket ground deicing activities ». Ergonomics International Journal vol. 4 , nº 6
Abdelhalim Loucif, Chunping Zhang, Mohammad Jahazi, Louis-Philippe Lapierre-Boire. 2020 « Macrosegregation characteristics of ferrite and austenite stabilizer elements in large size high strength steel ingot ». 8th International Conference on Engineering and Innovative Materials (ICEIM 2019) (Tokyo, Japan, Sept. 06-08, 2019) Trans Tech Publications Ltd
Mohsen Marani, Victor Songmene, Mohammadjavad Zeinali, Jules Kouam, Yasser Zedan. 2020 « Neuro-fuzzy predictive model for surface roughness and cutting force of machined Al20 Mg2Si2Cu metal matrix composite using additives ». Neural Computing and Applications vol. 32. p. 8115-8126
Mohsen Marani, Mohammadjavad Zeinali, Jules Kouam, Victor Songmene, Chris K. Mechefske. 2020 « Prediction of cutting tool wear during a turning process using artificial intelligence techniques ». International Journal of Advanced Manufacturing Technology vol. 111 , nº 1-2. p. 505-515
Ehsan Mohseni, Hamid Habibzadeh Boukani, Demartonne Ramos Franca, Martin Viens. 2020 « A study of the automated eddy current detection of cracks in steel plates ». Journal of Nondestructive Evaluation vol. 39 , nº 1
Ehsan Mohseni, Demartonne Ramos Franca, Martin Viens, Wen Fang Xie, Baoguang Xu. 2020 « Finite element modelling of a reflection differential split-D eddy current probe scanning surface notches ». Journal of Nondestructive Evaluation vol. 39 , nº 2
Ehsan Mohseni, Martin Viens, Wen-Fang Xie. 2020 « Adaptive neuro-fuzzy inference system trained for sizing semi-elliptical notches scanned by eddy currents ». Journal of Nondestructive Evaluation vol. 39 , nº 1
Hossein Monajati, Mariem Zoghlami, Amevi Tongne, Mohammad Jahazi. 2020 « Assessing microstructure-local mechanical properties in friction stir welded 6082-T6 aluminum alloy ». Metals vol. 10 , nº 9
Oluwole A. Olufayo, Mouhamed Dhafer Boulaares, Victor Songmene. 2020 « Machining/machinability of Rene 65 superalloy for aerospace applications ». IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT) (Cape town, South Africa, Jan. 20-22, 2020) IEEE
Konstantin Polyakov, Fernando López, Martin Viens. 2020 « Advanced signal processing techniques to improve the detection of defects in pressure vessels by acoustic emission testing ». e-Journal of Nondestructive Testing vol. 25 , nº 12
Hamidreza Pourzarei, Louis Rivest, Conrad Boton. 2020 « Cross-Pollination as a comparative analysis approach to comparing BIM and PLM: A literature review ». Product Lifecycle Management Enabling Smart X : 17th IFIP WG 5.1 International Conference, PLM 2020, Rapperswil, Switzerland, July 5–8, 2020, Revised Selected Papers (Rapperswil, Switzerland, July 05-08, 2020) Springer
Yousef Saadati, Jean-François Chatelain, Gilbert Lebrun, Yves Beauchamp, Philippe Bocher, Nicolas Vanderesse. 2020 « A study of the interlaminar fracture toughness of unidirectional flax/epoxy composites ». Journal of Composites Science vol. 4 , nº 2
Yousef Saadati, Gilbert Lebrun, Christophe Bouvet, Jean-François Chatelain, Yves Beauchamp. 2020 « Study of translaminar fracture toughness of unidirectional flax/epoxy composite ». Composites Part C: Open Access vol. 1
Yousef Saadati, Gilbert Lebrun, Jean-François Chatelain, Yves Beauchamp. 2020 « Experimental investigation of failure mechanisms and evaluation of physical/mechanical properties of unidirectional flax–epoxy composites ». Journal of Composite Materials vol. 54 , nº 20. p. 2781-2801
Morteza Sadeghifar, Mahshad Javidikia, Victor Songmene, Mohammad Jahazi. 2020 « Finite element simulation-based predictive regression modeling and optimum solution for grain size in machining of Ti6Al4V alloy: Influence of tool geometry and cutting conditions ». Simulation Modelling Practice and Theory vol. 104
Mohamed Nejib Saidi, Abdelhakim Djebara, Victor Songmene, Ali Bahloul. 2020 « Experimental evaluation of three local exhaust ventilation systems designed to reduce ultrafine dust emission during a polishing process ». Aerosol Science and Engineering vol. 4 , nº 1. p. 9-17
Ahad Shafiee, Mahmoud Nili-Ahmadabadi, Hyoung Seop Kim, Mohammad Jahazi. 2020 « Development and microstructural characterization of a new wrought high entropy superalloy ». Metals and Materials International vol. 26 , nº 5. p. 591-602
Mohamed Shnfir, J. Kouam, V. Songmene. 2020 « Ultrafine particle emission during high-speed milling of hardened AISI 1045 steel ». International Journal of Advanced Manufacturing Technology vol. 110 , nº 3-4. p. 617-627
Mohamed Slamani, Jean-François Chatelain. 2020 « Kriging versus Bezier and regression methods for modeling and prediction of cutting force and surface roughness during high speed edge trimming of carbon fiber reinforced polymers ». Measurement: Journal of the International Measurement Confederation vol. 152
Hussein Slim, Sylvie Nadeau. 2020 « A mixed rough sets/fuzzy logic approach for modelling systemic performance variability with FRAM ». Sustainability vol. 12 , nº 5
Hussein Slim, Sylvie Nadeau. 2020 « A proposition for combining rough sets, fuzzy logic and FRAM to address methodological challenges in safety management: A discussion paper ». Safety vol. 6 , nº 4
V. Songmene, O. A. Olufayo. 2020 « Advances in fine and ultrafine particles emission and dispersion in machining: Cases of metals and granite ». Proceedings of 2020 IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT) (Cape town, South Africa, Jan. 20-22, 2020) IEEE
S. Tabaie, F. Rézaï-Aria, M. Jahazi. 2020 « Effect of pre-heat treatment on micro-segregation of nb in the microstructure of linear friction welded inconel 718 fabricated by selective laser melting ». Affiche présentée lors de la conférence : Conference of Metallurgists (Toronto, ON, Canada, Aug. 24-27, 2020)
Seyedmohammad Tabaie, Farhad Rézaï-Aria, Mohammad Jahazi. 2020 « Microstructure evolution of selective laser melted inconel 718: Influence of high heating rates ». Metals vol. 10 , nº 5
Yaniel Torres Medina, Sylvie Nadeau. 2020-09-23 « Avènement de l’opérateur 4.0 : l’avenir du secteur manufacturier ». Substance ÉTS
Yaniel Torres Medina, Sylvie Nadeau. 2020 « Operator 4.0 in manufacturing: trends, potential technologies and future perspectives ». Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Berlin, Germany, March 16-18, 2020) GfA-Press
Yaniel Torres Medina, Sylvie Nadeau. 2020-09-23 « The Future in Manufacturing - The Rise of Operator 4.0 ». Substance ÉTS
Dinh Son Tran, Victor Songmene, Anh Dung Ngo, Jules Kouam. 2020 « Effects of reinforcements and cutting parameters on machinability of polypropylene-based biocomposite reinforced with biocarbon particles and chopped miscanthus fibers ». International Journal of Advanced Manufacturing Technology vol. 110 , nº 11-12. p. 3423-3444
Dinh Son Tran, Victor Songmene, Anh Dung Ngo, Jules Kouam, Arturo Rodriguez-Uribe, Manjusri Misra, Amar Kumar Mohanty. 2020 « Experimental investigation on machinability of polypropylene reinforced with miscanthus fibers and biochar ». Materials vol. 13 , nº 5
Valérie Tuyêt Mai Ngô, Sylvie Nadeau, Stéphane Hallé. 2020 « Validation of ergonomic criteria of a cooling vest for deep and ultra-deep mining ». International Journal of Industrial Ergonomics vol. 78
Ali Vedaei-Sabegh, Jean-Benoit Morin, Mohammad Jahazi. 2020 « Influence of nickel on high-temperature oxidation and characteristics of oxide layers in two high-strength steels ». Steel Research International vol. 91 , nº 4
Ali Yeganefar, Seyed Ali Niknam, Victor Songmene. 2020 « Machinability study of aircraft series aluminium alloys 7075-T6 and 7050-T7451 ». Transactions of the Canadian Society for Mechanical Engineering vol. 44 , nº 3. p. 427-439
C. Zhang, M. Jahazi, R. Tremblay. 2020 « Simulation and experimental validation of the effect of superheat on macrosegregation in large-size steel ingots ». International Journal of Advanced Manufacturing Technology vol. 107 , nº 1-2. p. 167-175
Chunping Zhang, Mohammad Jahazi, Paloma Isabel Gallego. 2020 « On the impact of microsegregation model on the thermophysical and solidification behaviors of a large size steel ingot ». Metals vol. 10 , nº 1
M. Zorgani, Carlos Garcia-Mateo, M. Jahazi. 2020 « The role of ausforming in the stability of retained austenite in a medium-C carbide-free bainitic steel ». Journal of Materials Research and Technology vol. 9 , nº 4. p. 7762-7776

J. Ajaja, W. Jomaa, P. Bocher, R. R. Chromik, V. Songmene, M. Brochu. 2019 « Hard turning multi-performance optimization for improving the surface integrity of 300M ultra-high strength steel ». International Journal of Advanced Manufacturing Technology vol. 104 , nº 1-4. p. 141-157
Ashwaq A. Al-Hashedi, Marco Laurenti, Mohamed Amine Mezour, Tayebeh Basiri, Heithem Touazine, Mohamed Jahazi, Faleh Tamimi. 2019 « Advanced inorganic nanocomposite for decontaminating titanium dental implants ». Journal of Biomedical Materials Research - Part B Applied Biomaterials vol. 107 , nº 3. p. 761-772
Ali Bahloul, Abdelhakim Djebara, Mohamed Nejib Saidi, Victor Songmene, Fernando Villalpando, Marcelo Reggio. 2019 « Computational and experimental analysis of ultrafine particle dispersion during granite polishing ». Aerosol Science and Engineering vol. 3 , nº 1. p. 21-31
Ali Bahloul, Rafael Francisco Jorge Vanterpool, Abdelhakim Djebara, Victor Songmene, Mohamed Nejib Said, Jules Kouam, Marcelo Reggio, Fernando Villalpando. 2019 « Transformation du granit : Caractérisation et contrôle de la poussière de la silice émise par le polissage ». Institut de recherche Robert-Sauvé en santé et en sécurité du travail. 99 p.
Mohammad Ebrahim Bajgholi, Martin Viens. 2019 « Evaluation of the dead zones in the welded joints of hydraulic turbine runners ». Communication lors de la conférence : NDT in Canada 2019 (Edmonton, AB, Canada, June 18-20, 2019)
Pierre Belanger, Mohammad Jahazi. 2019 « Friction stir welded lap joint inspection using ultrasonic guided waves ». 45th Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 38 (Burlington, VT, USA, July 15-19, 2018) AIP Publishing
Mohamed Aziz Ben Trad, Vincent Demers, Louis Dufresne. 2019 « Effect of powder shape and size on rheological, thermal, and segregation properties of low-pressure powder injection molding feedstocks ». Journal of Materials Engineering and Performance vol. 28 , nº 9. p. 5551-5562
Nima Bohlooli Arkhazloo, Yassine Bouissa, Farzad Bazdidi-Tehrani, Mohammad Jadidi, Jean-Benoit Morin, Mohammad Jahazi. 2019 « Experimental and unsteady CFD analyses of the heating process of large size forgings in a gas-fired furnace ». Case Studies in Thermal Engineering vol. 14
Yassine Bouissa, Davood Shahriari, Henri Champliaud, Mohammad Jahazi. 2019 « Prediction of heat transfer coefficient during quenching of large size forged blocks using modeling and experimental validation ». Case Studies in Thermal Engineering vol. 13
K. Chadha, M. Jahazi, John G. Spray. 2019 « Effect of strain rate on the columnar to equiaxed transition in an as-cast medium-carbon low-alloy steel during hot deformation ». Materials Science and Technology (MS&T19) (Portland, OR, USA, Sept. 29-Oct. 3, 2019) Materials Science and Technology
K. Chadha, Davood Shahriari, C. Jr. Aranas, Louis-Philippe Lapierre-Boire, Mohammad Jahazi. 2019 « On the role of chromium in dynamic transformation of austenite ». Metals and Materials International vol. 25 , nº 3. p. 559-569
Kanwal Chadha, Mohammad Jahazi. 2019-03-12 « Approche atomistique de la transformation de l’acier ». Substance ÉTS
Kanwal Chadha, Mohammad Jahazi. 2019-03-12 « Atomistic Approach in Steel Transformation ». Substance ÉTS
Jean-François Chatelain, C. M. Ouellet-Plamondon, B. Lasseur, H. Kuate-Togue. 2019 « Effect of additives on the machinability of glass fiber reinforced polymer ». In Materials Design and Applications II. p. 295-312. Springer Verlag
B. Cognet, J. P. Pernot, L. Rivest, C. Danjou, T. Wuest, H. Karkkainen, M. Lafleur. 2019 « Towards a novel comparison framework of digital maturity assessment models ». Product Lifecycle Management in the Digital Twin Era : 16th IFIP WG 5.1 International Conference, PLM 2019, Moscow, Russia, July 8–12, 2019, Revised Selected Papers (Moscow, Russia, July 08-12, 2019) Springer
B. Cognet, J-P. Pernot, L. Rivest, C. Danjou, T. Wuest, H. Kärkkäinen, M. Lafleur. 2019 « Towards a novel comparison framework of digital maturity assessment models ». IFIP 16th International Conference on Product Lifecycle Management (Moscow, Russia, July 08-12, 2019)
V Demers. 2019 « Low-pressure powder injection moulding review: enabling cost effective low and high volume PIM production ». PIM International vol. 13 , nº 2. p. 53-63
Vincent Demers. 2019 « Low-pressure powder injection moulding : Enabling cost-effective low and high-volume production ». Powder Injection Moulding International vol. 13 , nº 2. p. 53-61
Benoit Despatis-Paquette, Louis Rivest, Robert Pellerin. 2019 « Connectivity validation for indoor IoT applications with weightless protocol ». 15th International Conference on Distributed Computing in Sensor Systems (DCOSS) - IoTI4 2019 : International Workshop on IoT Applications and Industry 4.0 (Santorini Island, Greece, May 29-31, 2019) IEEE Computer Society
Issa Diop, Sylvie Nadeau, Behnam Emami-Mehrgani. 2019 « A mathematical model: A flexible manufacturing system, prone to error, making two products each with stochastic demand schedules ». American Journal of Industrial and Business Management vol. 9 , nº 1. p. 139-168
Frederic Dupont-Marillia, Mohammad Jahazi, Pierre Belanger. 2019 « Live imaging using TFM in a 30-inch forged steel block ». ASNT Annual Conference 2019 (Las Vegas, NV, USA, Nov. 18-21, 2019) ASNT
Frederic Dupont-Marillia, Mohammad Jahazi, Serge Lafreniere, Pierre Belanger. 2019 « Design and optimisation of a phased array transducer for ultrasonic inspection of large forged steel ingots ». NDT and E International vol. 103. p. 119-129
Frederic Dupont-Marillia, Mohammad Jahazi, Serge Lafreniere, Pierre Belanger. 2019 « Influence of local mechanical parameters on ultrasonic wave propagation in large forged steel ingots ». Journal of Nondestructive Evaluation vol. 38 , nº 3
G. R. Ebrahimi, A. Momeni, H. R. Ezatpour, M. Jahazi, P. Bocher. 2019 « Dynamic recrystallization in Mone1400 Ni-Cu alloy: mechanism and role of twinning ». Materials Science and Engineering: A vol. 744. p. 376-385
Khalid El-Ghaoui, Jean-François Chatelain, Claudiane Ouellet-Plamondon. 2019 « Effect of graphene on machinability of glass fiber reinforced polymer (GFRP) ». Journal of Manufacturing and Materials Processing vol. 3 , nº 3
Khalid El-Ghaoui, Jean-François Chatelain, Claudiane Ouellet-Plamondon, Ronan Mathieu. 2019 « Effects of nano organoclay and wax on the machining temperature and mechanical properties of Carbon Fiber Reinforced Plastics (CFRP) ». Journal of Composites Science vol. 3 , nº 3
Adriana Eres-Castellanos, Javier Hidalgo, Muftah Zorgani, Mohammad Jahazi, Isaac Toda-Caraballo, Francisca G. Caballero, Mateo Garcia. 2019 « On the control of the scale of nanobainitic microstructures by prior austenite strengthening ». Communication lors de la conférence : European Congress and Exhibition on Advanced Materials and Processes (EUROMAT) (Stockholm, Sweden, Sept. 01-05, 2019)
Mohamed Esouilem, Abdel-Hakim Bouzid, Sylvie Nadeau. 2019 « Accident causes involving pressure vessels: A case study analysis with STAMP model ». Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Dresden, Germany, Feb. 27-Mar. 1, 2019) GfA-Press
Mohamed Esouilem, Abdel-Hakim Bouzid, Sylvie Nadeau. 2019 « Safety and risk management analysis of accidents related to pressure vessels and piping in Alberta petrochemical industry from 2008 to 2017 ». Pressure Vessels and Piping Conference (PVP) 2019 (San Antonio, TX, USA, July 14-19, 2019) ASME
A. Fall, H. Monajati, A. Khodabandeh, M. H. Fesharaki, H. Champliaud, M. Jahazi. 2019 « Local mechanical properties, microstructure, and microtexture in friction stir welded Ti-6Al-4V alloy ». Materials Science and Engineering: A vol. 749. p. 166-175
Eslam Fayed, Mamoun Medraj, Davood Shahriari, Mohammad Jahazi, Vladimir Brailovski. 2019 « Effect of heat treatment holding time on the microstructure and mechanical properties of Inconel 718 superalloy fabricated by selective laser melting ». Proceedings of The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019) Western University - Department of Mechanical and Materials Engineering
D. Forgues, L. Rivest, C. Danjou, J. Meyer. 2019 « De l’industrie 4.0 à la construction 4.0 : des exemples concrets! ». Communication lors de la conférence : Aedifica (Montreal, QC, Canada, 14 avril 2019)
Daniel Forgues, Louis Rivest, Christophe Danjou, Julien Meyer. 2019 « De l’Industrie 4.0 à la Construction 4.0 : Des exemples concrets! ». Communication lors de la conférence : Congrès de l'Association de la construction du Québec (Charlevoix, QC, Canada, 15-16 mars 2019)
Mathieu Gendron, Bruce Hazel, Eric Boudreault, Henri Champliaud, Xuan-Tan Pham. 2019 « Coupled thermo-electromagnetic model of a new robotic high-frequency local induction heat treatment system for large steel components ». Applied Thermal Engineering vol. 150. p. 372-385
Louis-Alexandre Généreux, Gilbert Lebrun, Martin Viens, Jean-François Chatelain. 2019 « Evaluation of machining defects in a composite laminate by combining non-destructive and tensile testing ». In Materials Design and Applications II. p. 341-362. Springer Verlag
E. Jacques, E. Desbiens, D. Boivin, S. Nadeau. 2019 « Technologies numériques : une révolution en marche dans la gestion des risques ». Communication lors de la conférence : Panel, Événement Les Affaires - SST (Montréal, QC, Canada, 11 sept. 2019)
Hamid Javadi, Walid Jomaa, Victor Songmene, Myriam Brochu, Philippe Bocher. 2019 « Inconel 718 superalloy controlled surface integrity for fatigue applications produced by precision turning ». International Journal of Precision Engineering and Manufacturing vol. 20 , nº 8. p. 1297-1310
Ali Khademi Far, Louis-Daniel Théroux, Martin Viens, Oliver Arés, Hakim Bendada. 2019 « Non-destructive evaluation of impact damage in CFRP by means of IRT, shearography and ultrasonic testing ». Communication lors de la conférence : NDT in Canada 2019 (Edmonton, AB, Canada, June 18-20, 2019)
F. B. Kouamou, V. Songmene, J. Kouam. 2019 « Effect of tool paths on fine & ultrafine particles emission & distribution during polishing of medium silica content granite ». Communication lors de la conférence : The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019)
Annie Francie Kouedeu, Jean-Pierre Kenné, Victor Songmene. 2019 « Optimal production planning of hybrid manufacturing/remanufacturing systems under deteriorations ». Proceedings of the 9th International Conference on Industrial Engineering and Operations Management (IEOM) (Bangkok, Thailand, March 05-07, 2019) IEOM Society
Clément Lemaire, Louis Rivest, Conrad Boton, Christophe Danjou, Christian Braesch, Felix Nyffenegger. 2019 « Analyzing BIM topics and clusters through ten years of scientific publications ». Journal of Information Technology in Construction vol. 24. p. 273-298
Alexandre Macloud, Ali Zeighami, Rachid Aissaoui, Louis Rivest. 2019 « Extracting grasping cues from one-handed tools geometry for digital human models ». International Conference on Human Systems Integration (HSI2019) (Biarritz, France, Sept. 11-13, 2019)
Omid Majidi, Mohammad Jahazi, Nicolas Bombardier. 2019 « A viscoplastic model based on a variable strain rate sensitivity index for superplastic sheet metals ». International Journal of Material Forming vol. 12 , nº 4. p. 693-702
Omid Majidi, Mohammad Jahazi, Nicolas Bombardier. 2019 « Prediction of material behavior during biaxial stretching of superplastic 5083 aluminum alloy ». International Journal of Advanced Manufacturing Technology vol. 102 , nº 5-8. p. 2357-2366
F. Masoumi, D. Shahriari, H. Monajati, J. Cormier, B. C. D. Flipo, A. Devaux, M. Jahazi. 2019 « Linear friction welding of AD730TM Ni-base superalloy: process-microstructure-property interactions ». Materials and Design vol. 183
Annick Melanson, Sylvie Nadeau. 2019 « Resilience engineering for sustainable prevention in the manufacturing sector: A comparative study of two methods of risk analysis ». American Journal of Industrial and Business Management vol. 9 , nº 1. p. 267-281
Jérémy Montlahuc, Louis Rivest, Jean-Philippe Pernot, Antoine Tahan, Arnaud Polette. 2019 « Vers une utilisation conjointe de données multi-sources pour la génération et le traitement de nuages de points multicouches de parcelles et d’ouvrages existants : constats et premiers éléments d’analyse ». Affiche présentée lors de la conférence : 87 e Congrès de l'ACFAS (Gatineau, QC, Canada, 27-31 mai 2019)
S. Nadeau, H. Salmanzadeh, M. Ahmadi, K. Landau. 2019 « Aviation deicing workers, global risk assessment of musculoskeletal injuries ». International Journal of Industrial Ergonomics vol. 71. p. 8-13
Sylvie Nadeau. 2019 « Incidences du numérique sur le travail ». Communication lors de la conférence : École d’été Industrie 4.0 (Montréal, QC, Canada, 27 août 2019)
Sylvie Nadeau. 2019 « Incidences du numérique sur le travail ». Communication lors de la conférence : Mardi 4.0/Séminaires du Service des Enseignements Généraux, École de technologie supérieure (Montréal, QC, Canada, 5 nov. 2019)
Sylvie Nadeau. 2019 « La métallurgie dans un environnement techno ». Communication lors de la conférence : 4ième Colloque de la métallurgie intelligente (Trois-Rivières, QC, Canada, 31 oct.-1 nov. 2019)
Sylvie Nadeau, Kurt Landeau. 2019-11-05 « Impact of Digital on Work ». Substance ÉTS
Sylvie Nadeau, Kurt Landeau. 2019-11-05 « Incidences du numérique sur le travail ». Substance ÉTS
A. Nemati, S. Nadeau, B. Ateme-Nguema, J. Belmonte. 2019 « Identifying lean tools to improve mining productivity and OHS conditions ». 13ème Conférence internationale de CIGI QUALITA (Montréal, QC, Canada, Juin 25-28, 2019)
Ali Nemati, Sylvie Nadeau, Barthélémy Ateme-Nguema. 2019 « Lean mining, productivity and occupational health and safety: An expert-elicitation study ». American Journal of Industrial and Business Management vol. 9 , nº 11. p. 2034-2049
Valérie Tuyêt Mai Ngô, Sylvie Nadeau, Stéphane Hallé. 2019 « Validation of a cooling vest’s usability matrix for deep and ultra-deep mining environments ». Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Dresden, Germany, Feb. 27-Mar. 1, 2019) GfA-Press
Seyed Ali Niknam, Masoud Saberi, Jules Kouam, Ramin Hashemi, Victor Songmene, Marek Balazinski. 2019 « Ultrafine and fine particle emission in turning titanium metal matrix composite (Ti-MMC) ». Journal of Central South University vol. 26 , nº 6. p. 1563-1572
Seyed Ali Niknam, Azziz Tiabi, Victor Songmene. 2019 « Burr edge occupancy: edge finishing index for milling machined parts ». Transactions of the Canadian Society for Mechanical Engineering vol. 43 , nº 2. p. 248-255
Oluwole A. Olufayo, Oussama Chaieb, Victor Songmene, Mohammad Jahazi. 2019 « Machining studies on high silicon content Al-Si alloys for the aerospace industry ». Communication lors de la conférence : The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019)
Oluwole A. Olufayo, Hanqing Che, Victor Songmene, Christina Katsari, Stephen Yue. 2019 « Machinability of Rene 65 superalloy ». Materials vol. 12 , nº 12
Oluwole A. Olufayo, Osamaand Elfasi, Victor Songmene. 2019 « Machinability studies of ferritic, austenitic and martensitic stainless steels ». Proceedings of The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019) Western University - Department of Mechanical and Materials Engineering
Louis Rivest, Christian Braesch, Felix Nyffenegger, Christophe Danjou, Nicolas Maranzana, Frédéric Segonds. 2019 « Identifying PLM themes and clusters from a decade of research literature ». International Journal of Product Lifecycle Management vol. 12 , nº 2. p. 81-106
Samuel F. Rodrigues, Fulvio Siciliano, Clodualdo Aranas Jr., Eden S. Silva, Gedeon S. Reis, Mohammad Jahazi, John J. Jonas. 2019 « Dynamic phase transformation behavior of a Nb-microalloyed steel during roughing passes at temperatures above the Ae3 ». Metals vol. 9 , nº 3
Mohammad Saadati, Amir Keyvan Edalat Nobarzad, Mohammad Jahazi. 2019 « On the hot cracking of HSLA steel welds: Role of epitaxial growth and HAZ grain size ». Journal of Manufacturing Processes vol. 41. p. 242-251
Yousef Saadati, Jean-François Chatelain, Gilbert Lebrun, Yves Beauchamp. 2019 « Comparison of density measurement methods for unidirectional flax-epoxy polymer composites ». European Conference on Multifunctional Structures (EMuS) (Barcelona, Spain, June, 11-12) International Centre for Numerical Methods in Engineering (CIMNE)
Yousef Saadati, Jean-François Chatelain, Gilbert Lebrun, Yves Beauchamp. 2019 « Tension and compression properties of unidirectional flax fibre-reinforced epoxy composites for modeling of machining processes ». 27th Canadian Congress of Applied Mechanics (CANCAM) (Sherbrooke, QC, Canada, May 27-30, 2019)
M. N. Saidi, V. Songmene, J. Kouam, A. Bahloul. 2019 « Study of surface quality and dust particles emission and dispersion during dry polishing of granite ». International Journal of Advanced Manufacturing Technology vol. 104. p. 4675-4684
Ahad Shafiee, Jongun Moon, Hyoung Seop Kim, Mohammad Jahazi, Mahmoud Nili-Ahmadabadi. 2019 « Precipitation behaviour and mechanical properties of a new wrought high entropy superalloy ». Materials Science and Engineering: A vol. 749. p. 271-280
Mohamed Shnfir, Oluwole A. Olufayo, Walid Jomaa, Victor Songmene. 2019 « Machinability study of hardened 1045 steel when milling with ceramic cutting inserts ». Materials vol. 12 , nº 23
Mohamed Slamani, Jean-François Chatelain. 2019 « Assessment of the suitability of industrial robots for the machining of carbon-fiber reinforced polymers (CFRPs) ». Journal of Manufacturing Processes vol. 37. p. 177-195
Mohamed Slamani, Jean-Francois Chatelain, Hossein Hamedanianpour. 2019 « Influence of machining parameters on surface quality during high speed edge trimming of carbon fiber reinforced polymers ». International Journal of Material Forming vol. 12 , nº 3. p. 331-353
H. Slim, S. Nadeau. 2019 « The need for a systemic perspective in aircraft deicing: a proposal of a risk and safety analysis method combining FRAM and fuzzy logic ». CASI-AERO 2019 (Laval, QC, Canada, 14-16 mai 2019)
Hussein Slim, Sylvie Nadeau. 2019 « A proposal for a predictive performance assessment model in complex sociotechnical systems combining fuzzy logic and the Functional Resonance Analysis Method (FRAM) ». American Journal of Industrial and Business Management vol. 9 , nº 6. p. 1345-1375
Victor Songmene. 2019 « Comité R&D aluminium : Enjeux pour l'usinage ». Communication lors de la conférence : Séminaire, CMQ, Organisé par Alu-Québec en collaboration avec CeAL (Trois-Rivières, QC, Canada, 31 janv. 2019)
Victor Songmene. 2019 « Progress on fine and ultrafine particles emission, dispersion & control during machining : cases of metals, composite, woods and granite ». Communication lors de la conférence : 5th Edition of International Conference on Occupational Health and Public Safety (Berlin, Germany, Apr. 23-24, 2019)
Victor Songmene. 2019 « Usinage 4.0 : optimisation des performances d'usinage ». Communication lors de la conférence : Séminaire Usinage 4.0, CTA Saint-Hubert, organisé par Réseau-TransA1 en collaboration avec Alu-Québec, CeAl et CRITM (Saint-Hubert, QC, Canada, 01 oct. 2019)
Seyedmohammad Tabaie, Davood Shahriari, Cléa Plouze, Alexandre Devaux, Jonathan Cormier, Mohammad Jahazi. 2019 « Hot ductility behavior of AD730™ nickel-base superalloy ». Materials Science and Engineering: A vol. 766
Valentin Thieulin, Louis Rivest, Antoine Tahan. 2019 « Investigation des performances in situ de la numérisation d’une tuyauterie industrielle par photogrammétrie et lumière structurée ». Affiche présentée lors de la conférence : 87 e Congrès de l'ACFAS (Gatineau, QC, Canada, 27-31 mai 2019)
Yaniel Torres Medina, Sylvie Nadeau, Kurt Landau. 2019 « Application of human errors analysis in manufacturing: A proposed intervention framework and techniques selection ». Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Dresden, Germany, Feb. 27-Mar. 1, 2019) GfA-Press
Yaniel Torres Medina, Sylvie Nadeau, Kurt Landau. 2019-11-18 « Assembly guidance systems in aerospace manufacturing ». Substance ÉTS
Yaniel Torres Medina, Sylvie Nadeau, Kurt Landau. 2019-11-18 « Des systèmes pour guider l’assemblage en fabrication aérospatiale ». Substance ÉTS
Heithem Touazine, Kanwal Chadha, Mohammad Jahazi, Philippe Bocher. 2019 « Characterization of subsurface microstructural alterations induced by hard turning of Inconel 718 ». Journal of Materials Engineering and Performance vol. 28 , nº 11. p. 7016-7024
Ngoc-Hung Vu, Xuan-Tan Pham, Vincent François, Jean-Christophe Cuillière. 2019-05-01 « Behavior Characterization of Large Dimension Composite Plate ». Substance ÉTS
Ngoc-Hung Vu, Xuan-Tan Pham, Vincent François, Jean-Christophe Cuillière. 2019-05-01 « Caractérisation du comportement d’une plaque composite de grande dimension ». Substance ÉTS
Ngoc-Hung Vu, Xuan-Tan Pham, Vincent Francois, Jean-Christophe Cuillière. 2019 « Characterization of multilayered carbon-fiber-reinforced thermoplastic composites for assembly process ». Journal of Thermoplastic Composite Materials vol. 32 , nº 5. p. 673-689
Ngoc-Hung Vu, Xuan-Tan Pham, Vincent François, Jean-Christophe Cuillière. 2019 « Inverse procedure for mechanical characterization of multi-layered non-rigid composite parts with applications to the assembly process ». Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science vol. 233 , nº 17. p. 6167-6176
Kanglin Xing, Xavier Rimpault, J. R. R. Mayer, Jean-François Chatelain, Sofiane Achiche. 2019 « Five-axis machine tool fault monitoring using volumetric errors fractal analysis ». CIRP Annals vol. 68 , nº 1. p. 555-558
Kanglin Xing, Xavier Rimpault, J. R. R. Mayer, Jean-François Chatelain, Sofiane Achiche. 2019 « Quantitative assessment of machine tools condition through fractal analysis of volumetric error vector similarity measures ». 7th CIRP Global Web Conference (CIRPe) (En ligne, Oct. 16-19, 2019) Elsevier B.V.
Chunping Zhang, Abdelhalim Loucif, Rami Tremblay, Mohammad Jahazi. 2019 « Influence of non-uniform temperature distribution of the mold on solidification behavior in large-size steel ingots ». Proceedings of the 8th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking (STEELSIM 2019) (Toronto, ON, Canada, Aug. 13-15, 2019) Association for Iron & Steel Technology

Clodualdo Jr. Aranas, Samuel Rodrigues, Ameth Fall, Mohammad Jahazi, John Jonas. 2018 « Determination of the critical stress associated with dynamic phase transformation in steels by means of free energy method ». Metals vol. 8 , nº 5
Z. Arhumah, M. Alkhabbat, X-T. Pham. 2018 « Heat effect on mechanical properties and microstructure of aluminum welding ». Affiche présentée lors de la conférence : REGAL student’s day (Montreal, QC, Canada, June 18-19, 2018)
Nima Bohlooli Arkhazloo, Farzad Bazdidi-Tehrani, Morin Jean-Benoit, Mohammad Jahazi. 2018 « A numerical thermal analysis of the heating process of large size forged ingots ». THERMEC 2018 : 10th International Conference on Processing and Manufacturing of Advanced Materials (Paris, France, July 9-13, 2018) Trans Tech Publications
Emna Ben Fredj, Hadi Ghasemi Nanesa, Mohammad Jahazi, Jean-Benoit Morin. 2018 « Influence of initial microstructure and grain size on transformation of bainite to austenite in large size forgings ». Journal of Iron and Steel Research International vol. 25 , nº 5. p. 554-562
Samuel Bertrand, Davood Shahriari, Mohammad Jahazi, Henri Champliaud. 2018 « Linear friction welding process simulation of Ti-6Al-4V alloy: a heat transfer analysis of the conditioning phase ». 17th International Conference on Metal Forming (Metal Forming) (Toyohashi, Japan, Sept. 16-19, 2018) Elsevier B.V.
Matthieu Bitterlin, Davood Shahriari, Louis-Philippe Lapierre-Boire, Jean-Benoît Morin, Mohammad Jahazi. 2018 « Hot deformation behavior of a nickel-modified AISI 4330 steel ». ISIJ International vol. 58 , nº 9. p. 1711-1720
Guillaume Boivin, Martin Viens, Pierre Belanger. 2018 « Plane wave SH0 piezoceramic transduction optimized using geometrical parameters ». Sensors vol. 18 , nº 2
Conrad Boton, Louis Rivest, Daniel Forgues, Julie R. Jupp. 2018 « Comparison of shipbuilding and construction industries from the product structure standpoint ». International Journal of Product Lifecycle Management vol. 11 , nº 3. p. 191-220
A. Bouzid, V. Songmene, J. P. Kenné. 2018 « Bavures d'usinage et ébavurage : Méthode de sélection des procédés et allocation optimale des machines ». 7th International Metrology Conference – CAFMET 2018 (Marrakech, Maroc, Apr. 09-12, 2018) Comite Africain de Metrologie
Gary Brionne, Abdelhalim Loucif, Chunping Zhang, Louis-Philippe Lapierre-Boire, Mohammad Jahazi. 2018 « 3D FEM simulation of the effect of cooling rate on SDAS and macrosegregation of a high strength steel ». 10th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Paris, France, July 09-13, 2018) Trans Tech Publications Ltd
Alessandra Caggiano, Xavier Rimpault, Roberto Teti, Marek Balazinski, Jean-Francois Chatelain, Luigi Nele. 2018 « Machine learning approach based on fractal analysis for optimal tool life exploitation in CFRP composite drilling for aeronautical assembly ». CIRP Annals vol. 67 , nº 1. p. 483-486
K. Chadha, Z. Ahmed, C. Aranas, D. Shahriari, M. Jahazi. 2018 « Influence of strain rate on dynamic transformation of austenite in an as-cast medium-carbon low-alloy steel ». Materialia vol. 1. p. 155-167
Jianqiang Chen, Vincent Demers, Daniel P. Turner, Philippe Bocher. 2018 « Experimental investigation on high-cycle fatigue of inconel 625 superalloy brazed joints ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 49A , nº 4. p. 1244-1253
Pierre Coulon, Jean-François Chatelain, Martine Dubé, Xavier Rimpault. 2018 « Effect of curing pressure on machinability of carbon fiber composite ». 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest, Hungary, June 25-27, 2018) Elsevier
S. Coutu, S. Nadeau, B. Ateme-Nguema. 2018 « Developing a design and implementation methodology of a lean and safe maintenance department ». Affiche présentée lors de la conférence : 32nd Triennial Congress of the International Commission on Occupational Health (ICOH) (Dublin, Ireland, April 29-May 4, 2018)
D. D. Dang, X. T. Pham, P. Labbe, F. Torriano, J. F. Morissette, C. Hudon. 2018 « CFD analysis of turbulent convective heat transfer in a hydro-generator rotor-stator system ». Applied Thermal Engineering vol. 130. p. 17-28
V. Demers, F. Fareh, S. Turenne, N. R. Demarquette, O. Scalzo. 2018 « Experimental study on moldability and segregation of Inconel 718 feedstocks used in low-pressure powder injection molding ». Advanced Powder Technology vol. 29 , nº 1. p. 180-190
Abdelhakim Djebara, Victor Songmene, Ali Bahloul. 2018 « Performance of a capillary dilution system for high concentration sampling of ultrafine aerosols ». Aerosol Science and Engineering vol. 2 , nº 2. p. 92–97
Frederic Dupont-Marillia, Mohammad Jahazi, Pierre Bélanger. 2018 « Phased array inspection of large size forged steel parts ». 44th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2017) (Provo, UT, USA, July 16-21, 2017) American Institute of Physics
M. Gharagozloo, X-T. Pham, C-C Nguyen. 2018 « Feasibility study of aluminium deposition by robotic MIG welding process ». CanWeld Conference 2018 (Winnipeg, MB, Canada, Sept. 12-13, 2018)
E. Gholami, V. Demers. 2018 « Molding properties of cobalt-chrome-based feedstocks used in low-pressure powder injection molding ». Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018 (San Antonio, TX, USA, June 17-20, 2018) Metal Powder Industries Federation
Ehsan Gholami, Vincent Demers. 2018 « Molding properties of cobalt-chrome-based feedstocks used in low-pressure powder injection molding ». International Journal of Mechanical and Production Engineering vol. 6 , nº 10. p. 33-38
Baoqi Guo, Clodualdo Aranas, Anes Foul, Xiankun Ji, Ameth Fall, Mohammad Jahazi, John J. Jonas. 2018 « Effect of multipass deformation at elevated temperatures on the flow behavior and microstructural evolution in Ti-6Al-4V ». Materials Science and Engineering: A vol. 729. p. 119-124
Baoqi Guo, Ameth Fall, Mohammad Jahazi, John J. Jonas. 2018 « Kinetics of post-dynamic coarsening and reverse transformation in Ti-6Al-4V ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 49 , nº 12. p. 5956-5961
Benjamin Guérineau, Louis Rivest, Matthieu Bricogne, Alexandre Durupt, Benoît Eynard. 2018 « Towards a design-method selection framework for multidisciplinary product development ». 15th International Design Conference (DESIGN 2018) (Dubrovnik, Croatia, May 21-24, 2018) Faculty of Mechanical Engineering and Naval Architecture
Hamid Habibzadeh Boukani, Martin Viens, Souheil-Antoine Tahan, Martin Gagnon. 2018 « Case study on the integrity and nondestructive inspection of flux-cored arc welded joints of Francis turbine runners ». International Journal of Advanced Manufacturing Technology vol. 98 , nº 5-8. p. 2201-2211
Alexandre Il, Jean-François Chatelain, Jean-François Lalonde, Marek Balazinski, Xavier Rimpault. 2018 « An experimental investigation of the influence of cutting parameters on workpiece internal temperature during Al2024-T3 milling ». International Journal of Advanced Manufacturing Technology vol. 97 , nº 1-4. p. 413-426
N. Karabibene, J-F. Chatelain, Y. Beauchamp, G. Lebrun. 2018 « Effect of machining parameters on the quality of a flax fiber reinforced polymer composite ». International Conference on Industry, Engineering, and Management Systems (IEMS 2018) (Cocoa Beach, FL, USA, Mar. 19-21, 2018)
N. Karabibene, J-F. Chatelain, Y. Beauchamp, G. Lebrun. 2018 « Effect of machining parameters on the uncut fibers of a unidirectional flax fiber reinforced composite ». Journal of Management and Engineering Integration vol. 11 , nº 1
Guy Richard Kibouka, Donatien Nganga-Kouya, Jean-Pierre Kenné, Vladimir Polotski, Victor Songmene. 2018 « Maintenance and setup planning in manufacturing systems under uncertainties ». Journal of Quality in Maintenance Engineering vol. 24 , nº 2. p. 170-184
H. Kuate-Togue, J-F. Chatelain, C. Ouellet-Plamondon. 2018 « Effect of additives on cutting temperature of glass fibers reinforced polymers ». Proceedings of The Canadian Society for Mechanical Engineering International Congress (CSME) (Toronto, ON, Canada, May 27-30, 2018) CSME
Kurt Landau, Sylvie Nadeau, Tiphaine Le Floch, François Morency. 2018 « Arbeitsprozesse und Wertschöpfungsbeiträge bei der Flugzeug-Enteisung ». Gesellschaft für Arbeitswissenschaft (Francfort, Allemagne, Fev. 21-23, 2018) GFA Press
Kurt Landau, Sylvie Nadeau, Tiphaine LeFloch. 2018 « Development of the Ergonomic Activity Sampling (EAS) method to analyse video-documented work processes with activity sampling ». Ergonomics International Journal vol. 2 , nº 4
Tiphaine Le Floch, Sylvie Nadeau, Kurt Landau, François Morency. 2018 « Aircraft deicing in open baskets: Study of the effects of activities on heart rate variability ». Gesellschaft für Arbeitswissenschaft (Francfort, Allemagne, Fev. 21-23, 2018) GFA Press
Abdelhalim Loucif, Emna Ben Fredj, Nathan Harris, Davood Shahriari, Mohammad Jahazi, Louis-Philippe Lapierre-Boire. 2018 « Evolution of A-type macrosegregation in large size steel ingot after multistep forging and heat treatment ». Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science vol. 49 , nº 3. p. 1046-1055
Abdelhalim Loucif, Matthieu Bitterlin, Mohammad Jahazi, Rami Tremblay, Jean-Benoît Morin, Louis-Philippe Lapierre-Boire. 2018 « Determination of the root causes for cracking in a large-size cast ingot of AISI 4317 steel using microstructural analysis ». Metallography, Microstructure, and Analysis vol. 7 , nº 2. p. 203-208
Abdelhalim Loucif, Davood Shahriari, Kanwal Chadha, Chunping Zhang, Mohammad Jahazi, Rami Tremblay, Louis-Philippe Lapierre-Boire. 2018 « Cracking and failure in a high strength low alloy steel during solidification ». 10th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Paris, France, July 09-13, 2018) Trans Tech Publications Ltd
Abdelhalim Loucif, Heithem Touazine, Mohammad Jahazi. 2018 « Prediction of steel transformation temperatures using thermodynamic modeling and design of experiments (DOE) ». 10th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Paris, France, July 09-13, 2018) Trans Tech Publications Ltd
Mountadar Lyassami, Davood Shahriari, Emna Ben Fredj, Jean-Benoit Morin, Mohammad Jahazi. 2018 « Numerical simulation of water quenching of large size steel forgings: Effects of macrosegregation and grain size on phase distribution ». Journal of Manufacturing and Materials Processing vol. 2 , nº 2
Omid Majidi, Mohammad Jahazi, Nicolas Bombardier. 2018 « Characterization of mechanical properties and formability of a superplastic Al-Mg alloy ». NUMISHEET 2018: 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (Tokyo, Japan, July 30-Aug. 6, 2018) IOP Publishing
Omid Majidi, Mohammad Jahazi, Nicolas Bombardier. 2018 « Finite element simulation of high-speed blow forming of an automotive component ». Metals vol. 8 , nº 11
Mohsen Marani, Victor Songmene, Jules Kouam, Yasser Zedan. 2018 « Experimental investigation on microstructure, mechanical properties and dust emission when milling Al-20Mg 2Si-2Cu metal matrix composite with modifier elements ». International Journal of Advanced Manufacturing Technology vol. 99 , nº 1-4. p. 789-802
Mohsen Marani, Victor Songmene, Jules Kouam, Yasser Zedan. 2018 « Valuation of the effect of barium on surface roughness and ultrafine particle emission while dry milling Al-20Mg2Si metal matrix composite ». 2018 6th International Conference on Mechanical, Automotive and Materials Engineering (CMAME) (Hong Kong, China, Aug. 10-12, 2018) IEEE
Mohsen Marani-Barzani, Victor Songmene. 2018 « Machinability and mechanical properties of Al-Mg2Si in-situ composite with bismuth or barium ». Affiche présentée lors de la conférence : REGAL student's day ()
Roland Maranzana, Omar Msaaf, Louis Rivest. 2018-04-17 « Method and system for comparing 3D models ». Brevet américain US 9,946,732 B2.
Roland Maranzana, Omar Msaaf, Louis Rivest. 2018-12-18 « Méthode et système de comparaison de modèles 3D ». Brevet canadien CA 2929892.
F. Masoumi, L. Thebaud, D. Shahriari, M. Jahazi, J. Cormier, A. Devaux, B. C. D. Flipo. 2018 « High temperature creep properties of a linear friction welded newly developed wrought Ni-based superalloy ». Materials Science and Engineering: A vol. 710. p. 214-226
Mahdi Masoumi Khalilabad, Yasser Zedan, Damien Texier, Mohammad Jahazi, Philippe Bocher. 2018 « Effect of tool geometry and welding speed on mechanical properties of dissimilar AA2198–AA2024 FSWed joint ». Journal of Manufacturing Processes vol. 34, part A. p. 86-95
Ahmad Mostafa, Davood Shahriari, Ignacio Picazo Rubio, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2018 « Hot compression behavior and microstructure of selectively laser-melted IN718 alloy ». International Journal of Advanced Manufacturing Technology vol. 96 , nº 1-4. p. 371-385
S. Nadeau. 2018 « Towards lean, six sigma, and lean six sigma OHS impacts in universities ». Affiche présentée lors de la conférence : 32nd Triennial Congress of the International Commission on Occupational Health (ICOH) (Dublin, Ireland, April 29-May 4, 2018)
S. Nadeau, K. Landau. 2018 « Utility, advantages and challenges of digital technologies in the manufacturing sector ». Ergonomics International Journal vol. 2 , nº 6
Frank Napon, Sylvie Nadeau. 2018 « Vers une intégration des risques opérationnels, de santé et de sécurité du travail en milieu universitaire ». Canada International Conference on Education (CICE) (Toronto, ON, Canada, June 25-28, 2018) Infonomics Society
H.-C. Nguyen, X-T. Pham, M. Jahazi. 2018 « Implementing phase-field ductile fracture model for aluminum welded joint ». Affiche présentée lors de la conférence : REGAL student’s day (Montreal, QC, Canada, June 18-19, 2018)
V. Ngô, S. Nadeau, S. Hallé. 2018 « Usability testing for ergonomic criteria matrix: case study of a deep cooling vest ». Communication lors de la conférence : 32nd Triennial Congress of the International Commission on Occupational Health (ICOH) (Dublin, Ireland, April 29-May 4, 2018)
Seyed Ali Niknam, Behnam Davoodi, J. Paulo Davim, Victor Songmene. 2018 « Mechanical deburring and edge-finishing processes for aluminum partsa review ». International Journal of Advanced Manufacturing Technology vol. 95 , nº 1-4. p. 1101-1125
Seyed Ali Niknam, Jules Kouam, Victor Songmene, Marek Balazinski. 2018 « Dry and semi-dry turning of titanium metal matrix composites (Ti-MMCs) ». 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest , Hungary, June 25-27, 2018) Elsevier
Francisco G. Pantoja, Victor Songmene, Jean-Pierre Kenné, Oluwole A. Olufayo, Michael Ayomoh. 2018 « Development of a tool cost optimization model for stochastic demand of machined products ». Applied Mathematics vol. 9 , nº 12. p. 1395-1423
X. Rimpault, J-F. Chatelain, M. Balazinski. 2018 « Fractal analysis applications for improving monitoring and prediction systems in machining ». 7th International Conference on Virtual Machining Process Technology (VMPT 2018) (Hamilton, ON, Canada, May 07-09, 2018)
Xavier Rimpault, Marek Balazinski, Jean-François Chatelain. 2018 « Fractal analysis application outlook for improving process monitoring and machine maintenance in manufacturing 4.0 ». Journal of Manufacturing and Materials Processing vol. 2 , nº 3
Xavier Rimpault, Alexandre Il, Jean-François Chatelain, Jean-François Lalonde, Marek Balazinski. 2018 « Workpiece subsurface temperature study during aluminum skin milling in slotting and ramping ». 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest, Hungary, June 25-27, 2018) Elsevier
L. Rivest, C. Danjou, R. Pellerin. 2018 « Positionnements stratégiques dans le contexte de l'industrie 4.0 ». Communication lors de la conférence : Table ronde 4.0 CEFRIO Prompt : De la pme 2.0 à l’entreprise 4.0 : la révolution des données (Montreal, QC, Canada, 31 mai 2018)
Louis Rivest, Christophe Danjou, Lola Lange, Robert Pellerin. 2018 « Positionnements stratégiques du vêtement connecté dans le contexte de l’Industrie 4.0 ». Communication lors de la conférence : Wear It Smart (Montreal, QC, Canada, May 10, 2018)
Louis Rivest, Christophe Danjou, Robert Pellerin. 2018 « Des pistes pour aborder l’ère du 4.0 ». Communication lors de la conférence : Table d'innovation - Conseil économique et tourisme du Haut-Richelieu (St-Jean sur le Richelieu, QC, Canada, 20 juin 2018)
Morteza Sadeghifar, Ramin Sedaghati, Walid Jomaa, Victor Songmene. 2018 « A comprehensive review of finite element modeling of orthogonal machining process: chip formation and surface integrity predictions ». International Journal of Advanced Manufacturing Technology vol. 96 , nº 9-12. p. 3747-3791
Morteza Sadeghifar, Ramin Sedaghati, Walid Jomaa, Victor Songmene. 2018 « Finite element analysis and response surface method for robust multi-performance optimization of radial turning of hard 300M steel ». International Journal of Advanced Manufacturing Technology vol. 94 , nº 5-8. p. 2457-2474
M. N. Saidi, V. Songmene, J. Kouam, A. Bahloul. 2018 « Rotational and translation-free polishing of granite: surface quality and dust particles emission and dispersion ». International Journal of Advanced Manufacturing Technology vol. 98 , nº 1-4. p. 289-303
Raiyan Seede, Ahmad Mostafa, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2018 « Microstructural and microhardness evolution from homogenization and hot isostatic pressing on selective laser melted inconel 718: Structure, texture, and phases ». Journal of Manufacturing and Materials Processing vol. 2 , nº 2
Hussein Slim, Sylvie Nadeau, François Morency. 2018 « FRAM: A complex system’s approach for the evaluation of aircraft on-ground deicing operations ». Gesellschaft für Arbeitswissenschaft (Francfort, Allemagne, Fev. 21-23, 2018) GFA Press
Hussein Slim, Sylvie Nadeau, François Morency. 2018 « The application of the Functional Resonance Analysis Method (FRAM) to evaluate factors affecting times-to-completion and graduation in graduate studies ». Gesellschaft für Arbeitswissenschaft (Francfort, Allemagne, Fev. 21-23, 2018) GFA Press
V. Songmene, J. Kouam, A. Balhoul. 2018 « Effect of minimum quantity lubrication (MQL) on fine and ultrafine particle emission and distribution during polishing of granite ». Measurement: Journal of the International Measurement Confederation vol. 114. p. 398-408
V. Songmene, A. Miazza, J. Kouam, O.A. Olufayo. 2018 « Machining granite materials: effects of polishing conditions on part quality, fine and ultrafine particles emission ». 7th International Metrology Conference – CAFMET 2018 (Marrakech, Maroc, Apr. 09-12, 2018) Comite Africain de Metrologie
Victor Songmene. 2018 « Effect of machining & lubricating conditions on dust emission during granite polishing ». Communication lors de la conférence : 4th International Conference on Occupational Health and Safety, EuroSciCon (London, UK, May 28-29, 2018)
Victor Songmene, Alban Miazza, Mohamed Amine Hechmi, Oluwole Ayodeji Olufayo, Jules Kouam. 2018 « Granite polishing: Effects of polishing parameters and tool paths on part quality and dust emission ». 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest , Hungary, June 25-27, 2018) Elsevier
Victor Songmene, Imed Zaghbani, Guillaume Kientzy. 2018 « Machining and machinability of tool steels: Effects of lubrication and machining conditions on tool wear and tool life data ». 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest, Hungary, June 25-27, 2018) Elsevier
Binhan Sun, Fateh Fazeli, Colin Scott, Baoqi Guo, Clodualdo Aranas, Xin Chu, Mohammad Jahazi, Stephen Yue. 2018 « Microstructural characteristics and tensile behavior of medium manganese steels with different manganese additions ». Materials Science and Engineering: A vol. 729. p. 496-507
Seyyed Hesamodin Talebi, Hadi Ghasemi-Nanesa, Mohammad Jahazi, Haikouhi Melkonyan. 2018 « Influence of starting microstructure on dilatation behavior during tempering of a high strength steel ». THERMEC 2018 : 10th International Conference on Processing and Manufacturing of Advanced Materials (Paris, France, July 9-13, 2018) Trans Tech Publications
Seyyed Hesamondin Talebi, Mohammad Jahazi, Haikouhi Melkonyan. 2018 « Retained austenite decomposition and carbide precipitation during isothermal tempering of a medium-carbon low-alloy bainitic steel ». Materials vol. 11 , nº 8
D. Texier, F. Atmani, P. Bocher, F. Nadeau, J. Chen, Y. Zedan, N. Vanderesse, V. Demers. 2018 « Fatigue performances of FSW and GMAW aluminum alloys welded joints: Competition between microstructural and structural-contact-fretting crack initiation ». International Journal of Fatigue vol. 116. p. 220-233
T.-N. Tran, C.-C. Nguyen, X.-T. Pham. 2018 « Multi-physics modeling of aluminium laser welding process ». Affiche présentée lors de la conférence : REGAL student’s day (Montreal, QC, Canada, June 18-19, 2018)
C. Zhang, D. Shahriari, A. Loucif, H. Melkonyan, M. Jahazi. 2018 « Influence of thermomechanical shrinkage on macrosegregation during solidification of a large-sized high-strength steel ingot ». International Journal of Advanced Manufacturing Technology vol. 99 , nº 9-12. p. 3035-3048
Chunping Zhang, Abdelhalim Loucif, Mohammad Jahazi, Rami Tremblay, Louis-Philippe Lapierre. 2018 « On the effect of filling rate on positive macrosegregation patterns in large size cast steel ingots ». Applied Sciences vol. 8 , nº 10

Ali Aidibe, Mojtaba Kamali Nejad, Antoine Tahan, Mohammad Jahazi, Sylvain G. Cloutier. 2017 « Surface characterization of die inserts used for LED lamp plastic lenses ». International Journal of Advanced Manufacturing Technology vol. 88 , nº 9-12. p. 3395-3403
Clodualdo Aranas, Anes Foul, Baoqi Guo, Ameth Fall, Mohammad Jahazi, John J. Jonas. 2017 « Determination of the critical stress for the initiation of dynamic transformation in commercially pure titanium ». Scripta Materialia vol. 133. p. 83-85
Mohsen Marani Barzani, Saeed Farahany, Victor Songmene. 2017 « Machinability characteristics, thermal and mechanical properties of Al-Mg2Si in-situ composite with bismuth ». Measurement: Journal of the International Measurement Confederation vol. 110. p. 263-274
Ali Bonakdar, Marjan Molavi-Zarandi, Ahmad Chamanfar, Mohammad Jahazi, Arash Firoozrai, Eric Morin. 2017 « Finite element modeling of the electron beam welding of Inconel-713LC gas turbine blades ». Journal of Manufacturing Processes vol. 26. p. 339-354
Yassine Bouissa, Henri Champliaud, Mohammad Jahazi, Louis-Philippe Lapierre-Boire, Jean-Benoît Morin, Nicolas Poulain. 2017 « Modeling heterogeneities effects on phase transformation during quenching of large size forged steel ingots ». Communication lors de la conférence : 14th U.S. National Congress on Computational Mechanics (USNCCM) (Montreal, QC, Canada, July 17-20, 2017)
H. H. Boukani, E. Mohseni, M. Viens. 2017 « Effect of fatigue crack orientation on the sensitivity of eddy current inspection in martensitic stainless steels ». Communication lors de la conférence : NDT in Canada 2017 (Québec, QC, Canada, June 06-08, 2017)
K. Chadha, D. Shahriari, R. Tremblay, P. P. Bhattacharjee, M. Jahazi. 2017 « Deformation and recrystallization behavior of the cast structure in large size, high strength steel ingots: Experimentation and modeling ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 48 , nº 9. p. 4297-4313
Kanwal Chadha, Davood Shahriari, Mohammad Jahazi. 2017 « An approach to develop hansel-spittel constitutive equation during ingot breakdown operation of low alloy steels ». Frontiers in Materials Processing, Applications, Research and Technology : Select Proceedings of FiMPART 2015 (Hyderabad, India, June 12-15, 2015) Springer
Ahmad Chamanfar, Hossein Monajati, Alex Rosenbaum, Mohammad Jahazi, Ali Bonakdar, Eric Morin. 2017 « Microstructure and mechanical properties of surface and subsurface layers in broached and shot-peened Inconel-718 gas turbine disc fir-trees ». Materials Characterization vol. 132. p. 53-68
Jianqiang Chen, Vincent Demers, Eve-Line Cadotte, Daniel Turner, Philippe Bocher. 2017 « Structural performance of inconel 625 superalloy brazed joints ». Journal of Materials Engineering and Performance vol. 26 , nº 2. p. 547-553
S. M. Chentouf, T. Belhadj, N. Bombardier, N. Brodusch, R. Gauvin, M. Jahazi. 2017 « Influence of predeformation on microstructure evolution of superplastically formed Al 5083 alloy ». International Journal of Advanced Manufacturing Technology vol. 88 , nº 9-12. p. 2929-2937
S. Coutu, S. Nadeau, B. Ateme-Nguema. 2017 « Implantation d’un département de maintenance intégrant Lean et santé et sécurité du travail ». Affiche présentée lors de la conférence : Congrès annuel AQHSST (Victoriaville, QC, Canada, 16-18 mai 2017)
Christophe Danjou, Robert Pellerin, Louis Rivest. 2017 « Le passage au numérique : Industrie 4.0 : des pistes pour aborder l'ère du numérique et de la connectivité ». Québec : Centre francophone d’informatisation des organisations (CEFRIO). 26 p.
Christophe Danjou, Louis Rivest, Robert Pellerin. 2017 « Douze positionnements stratégiques pour l’Industrie 4.0 : entre processus, produit et service, de la surveillance à l’autonomie ». CIGI 2017 : 12ème Congrès International de Génie Industriel (Compiègne, France, 3-5 mai 2017)
M. Daoud, J. F. Chatelain, A. Bouzid. 2017 « Effect of rake angle-based Johnson-Cook material constants on the prediction of residual stresses and temperatures induced in Al2024-T3 machining ». International Journal of Mechanical Sciences vol. 122. p. 392-404
J. Darveau, S. Gosselin, A. Lagrandeur, S. Nadeau, S. Hallé, B. Boudreau-Trudel. 2017 « Étude et conception primaire des tableaux de bord de boulonneuses et foreuses ». Communication lors de la conférence : Le colloque APSM (Malartic, Abitibi, 15 mars 2017)
J. Delahaigue, J. F. Chatelain, G. Lebrun. 2017 « Machining analysis of unidirectional and bi-directional flax-epoxy composite laminates ». Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications vol. 231 , nº 1-2. p. 196-209
Jérémy Delahaigue, Jean-Francois Chatelain, Gilbert Lebrun. 2017 « Influence of cutting temperature on the tensile strength of a carbon fiber-reinforced polymer ». Fibers vol. 5 , nº 4
Sébastien Demers, Sylvie Nadeau, Abdel-Hakim Bouzid. 2017 « Analytical evaluation of stresses and displacements of an intervertebral disc ». Journal of Biomechanical Science and Engineering vol. 12 , nº 3
V. Demers, M. M. Elmajdoubi, P. Bocher. 2017 « Moldability of low-pressure powder injection molding feedstocks ». Advances in Powder Metallurgy & Particulate Materials 2017 : Conference Proceedings (Las Vegas , NV, USA, June 13-16, 2017) Metal Powder Industries Federation
I. Diop, S. Nadeau, B. Emami-Mehrgani. 2017 « Human error, optimal production control policies and corrective maintenance with lockout-tagout ». Applied Human Factors and Ergonomics Conferrence (AHFE) (Los Angeles, CA, USA, July 17-21, 2017)
Frederic Dupont-Marillia, Mohammad Jahazi, Serge Lafreniere, Pierre Bélanger. 2017 « Influence of local mechanical properties of high strength steel from large size forged ingot on ultrasonic wave velocities ». 43rd Annual Review of Progress in Quantitative Nondestructive Evaluation (Atlanta, GA, USA, July 17-22, 2016) American Institute of Physics
Tarek Elgnemi, Keivan Ahmadi, Victor Songmene, Jungsoo Nam, Martin B. G. Jun. 2017 « Effects of atomization-based cutting fluid sprays in milling of carbon fiber reinforced polymer composite ». Journal of Manufacturing Processes vol. 30. p. 133-140
A. Fall, M. Jahazi, A. R. Khodabandeh, M. H. Fesharakib. 2017 « Effect of process parameters on microstructure and mechanical properties of friction stir-welded Ti-6Al-4V joints ». International Journal of Advanced Manufacturing Technology vol. 91 , nº 5-8. p. 2919-2931
F. Fareh, V. Demers, N. R. Demarquette, S. Turenne, O. Scalzo. 2017 « Influence of segregation on rheological properties of wax-based feedstocks ». Powder Technology vol. 320. p. 273-284
Emna Ben Fredj, Hadi Ghasemi Nanesa, Davood Shahriari, Jean-Benoit Morin, Mohammad Jahazi. 2017 « Effect of cooling rate on phase transformation and microstructure evolution in a large size forged ingot of medium carbon low alloy steel ». TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings (San Diego, CA, USA, Feb. 26-March 2, 2017) Springer International Publishing
Mathieu Gendron, Bruce Hazel, Eric Boudreault, Henri Champliaud, Xuan-Tan Pham. 2017 « Modeling circular inductors coupled to a semi-infinite magnetic medium considering the proximity effect ». Journal of Electromagnetic Waves and Applications vol. 31 , nº 13. p. 1232-1254
Seyedbehzad Ghafarizadeh, Amir Masoud Tahvilian, Jean-François Chatelain, Zhaoheng Liu, Henri Champliaud, Gilbert Lebrun. 2017 « Numerical simulation of ball-end milling with SPH method ». International Journal of Advanced Manufacturing Technology vol. 88 , nº 1. p. 401-408
Hadi Ghasemi-Nanesa, Mohammad Jahazi, Majid Heidari, Tom Levasseur. 2017 « The influence of deformation-induced microvoids on mechanical failure of AISI A8-Mod martensitic tool steel ». 20th International ESAFORM Conference on Material Forming (ESAFORM) (Dublin, Ireland, Apr. 26-28, 2017) American Institute of Physics
Benjamin Guerineau, Chen Zheng, Matthieu Bricogne, Alexandre Durupt, Louis Rivest, Harvey Rowson, Benoît Eynard. 2017 « Management of heterogeneous information for integrated design of multidisciplinary systems ». 27th CIRP Design 2017 (Cranfield, UK, May 10-12, 2017) Elsevier
S. Günebak, S. Nadeau, F. Morency, O. Straeter. 2017 « Analysis of eye-tracking dynamics in aircraft ground deicing ». 63rd Aeronautics Conference (CASI-AERO) (Toronto, ON, Canada, May 16-18, 2017) Canadian Aeronautics and Space Institute
Nathan Harris, Davood Shahriari, Mohammad Jahazi. 2017 « Development of a fast converging material specific void closure model during ingot forging ». Journal of Manufacturing Processes vol. 26. p. 131-141
S. Hesamodin Talebi, Hadi Ghasemi-Nanesa, Mohammad Jahazi, Haikouhi Melkonyan. 2017 « In situ study of phase transformations during non-isothermal tempering of bainitic and martensitic microstructures ». Metals vol. 7 , nº 9
Walid Jomaa, Oussama Mechri, Julie Levesque, Victor Songmene, Philippe Bocher, Augustin Gakwaya. 2017 « Finite element simulation and analysis of serrated chip formation during highspeed machining of AA7075T651 alloy ». Journal of Manufacturing Processes vol. 26. p. 446-458
Walid Jomaa, Victor Songmene, Philippe Bocher. 2017 « Predictive analytical modeling of cutting forces generated by high-speed machining of ductile and hard metals ». Machining Science and Technology vol. 21 , nº 3. p. 335-361
Walid Jomaa, Victor Songmene, Philippe Bocher, Augustin Gakwaya. 2017 « Fea-based comparative investigation on high speed machining of aluminum alloys aa6061-t6 and aa7075-t651 ». 9th International Congress on Precision Machining, (ICPM 2017) (Athens, Greece, Sept. 06-09, 2017)
John J. Jonas, Clodualdo Aranas, Ameth Fall, Mohammad Jahazi. 2017 « Transformation softening in three titanium alloys ». Materials & Design vol. 113. p. 305-310
K. Karabibene, J.-F. Chatelain, Y. Beauchamp, G. Lebrun. 2017 « Optimization of machining parameters for the trimming process of unidirectional flax fiber composites ». 10th Canadian-International Conference on Composites (Ottawa, ON, Canada, July 17-20, 2017)
Frank Éric Kemi Yotat, Jean-Pierre Kenné, Victor Songmene. 2017 « Optimal stochastic control of an aluminium recycling unit in reverse logistics ». 29th European Modeling and Simulation Symposium (EMSS 2017) Held at the International Multidisciplinary Modeling and Simulation Multiconference (I3M 2017) (Barcelona, Spain, Sept. 18-20, 2017) CAL-TEK S.r.l.
Riad Khettabi, Mourad Nouioua, Abdelhakim Djebara, Victor Songmene. 2017 « Effect of MQL and dry processes on the particle emission and part quality during milling of aluminum alloys ». International Journal of Advanced Manufacturing Technology vol. 92 , nº 5/8. p. 2593-2598
Simon G. Lamarre, Vincent Demers, Jean-François Chatelain. 2017 « Low-pressure powder injection molding using an innovative injection press concept ». International Journal of Advanced Manufacturing Technology vol. 91 , nº 5-8. p. 2595-2605
Kurt Landau, Sylvie Nadeau, Tiphaine Le Floch, François Morency. 2017 « Ergonomic time and motion studies of aircraft de-icing work ». Journal of Ergonomics vol. 7 , nº 4
A. Loucif, M. Bitterlin, M. Jahazi, R. Tremblay, J. B. Morin, L. P. Lapierre-Boire. 2017 « Crack analysis in as cast large size ingot of a high strength steel ». 14th International Conference on Fracture (ICF 2017) (Rhodes, Greece, June 18-20, 2017) International Conference on Fracture
A. Loucif, D. Shahriari, K. Chadha, M. Jahazi, R. Tremblay, L. P. Lapierre-Boire. 2017 « Analysis of cracks and failure during solidification of a high strength low alloy steel ». 14th International Conference on Fracture (ICF 2017) (Rhodes, Greece, June 18-20, 2017) International Conference on Fracture
Abdelhalim Loucif, Davood Shahriari, Chunping P. Zhang, Mohammad Jahazi, Louis-Philippe Lapierre-Boire, Rami Tremblay. 2017 « Macrosegregation of alloying elements in hot top of large size high strength steel ingot ». International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Graz, Austria, May 29-June 03, 2016) Trans Tech Publications
Omid Majidi, Mohammad Jahazi, Nicolas Bombardier, Ehab Samuel. 2017 « Variation of strain rate sensitivity index of a superplastic aluminum alloy in different testing methods ». 20th International ESAFORM Conference on Material Forming (ESAFORM) (Dublin, Ireland, Apr. 26-28, 2017) American Institute of Physics
Mohsen Marani, Victor Songmene, Ibrahem Maher. 2017 « Investigation on surface finish and tool condition while turning AL20 Mg2Si metal matrix composite ». Proceedings of The IRES International Conference (Teheran, Iran, June 12-13, 2017) The Institute of Research Engineers and Scientists International Conference
Mohsen Marani, Victor Songmene, Ibrahem Maher. 2017 « Investigation on surface finish and tool condition while turning AL20Mg2Si metal matrix composite ». International Journal of Advances in Science, Engineering and Technology vol. 5 , nº 3, Supp. 1. p. 11-14
Clément Marty, Servet Günebak, Sylvie Nadeau, François Morency. 2017 « L’oculométrie peut-elle être utilisée pour étudier le travail de coordonnateur de trafic dans un centre de dégivrage aéronautique centralisé ? ». 52ème Congrès de la Société d’Ergonomie de Langue Française (SELF) (Toulouse, France, Sept. 20-22, 2017) Société d'Ergonomie de Langue Française
F. Masoumi, D. Shahriari, M. Jahazi, J. Cormier, B. C. D. Flipo. 2017 « On the occurrence of liquation during linear friction welding of Ni-based superalloys ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 48A , nº 6. p. 2886-2899
Shilan Meimandi, Nicolas Vanderesse, Denis Thibault, Philippe Bocher, Martin Viens. 2017 « Macro-defects characterization in cast CA-6NM martensitic stainless steel ». Materials Characterization vol. 124. p. 31-39
F. Mirakhorli, X. Cao, X. T. Pham, P. Wanjara, J. L. Fihey. 2017 « Phase structures and morphologies of tempered CA6NM stainless steel welded by hybrid laser-arc process ». Materials Characterization vol. 123. p. 264-274
F. Mirakhorli, X. Cao, X. T. Pham, P. Wanjara, J. L. Fihey. 2017 « Technical challenges in narrow-gap root pass welding during tandem and hybrid laser-arc welding of a thick martensitic stainless steel ». International conference on processing and manufacturing of advanced materials (THERMEC) (Graz, Austria, May 29-June 03, 2016) Trans Tech Publications
E. Mohseni, M. Viens. 2017 « Sensitivity of eddy current signals to probe's tilt and lift-off while scanning semi-elliptical surface notches - a finite element modeling approach ». Communication lors de la conférence : NDT in Canada 2017 (Québec, QC, Canada, June 06-08, 2017)
Ahmad Mostafa, Ignacio Picazo Rubio, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2017 « Structure, texture and phases in 3D printed IN718 alloy subjected to homogenization and HIP treatments ». Metals vol. 7 , nº 6
Sylvie Nadeau. 2017 « La perception des risques ». Communication lors de la conférence : Événement – Leadership SST du Centre patronal de santé et de sécurité du travail du Québec : Les risques et la « Tolérance Zéro », êtes-vous bien outillé? (Brossard, QC, Canada, 30 mai 2017)
Sylvie Nadeau. 2017 « Le lean university va-t-il franchir nos portes? ». Travail et Santé vol. 33 , nº 3. p. 36
Sylvie Nadeau. 2017 « Lean, Six Sigma and Lean Six Sigma in higher education: a review of experiences around the world ». American Journal of Industrial and Business Management vol. 7 , nº 5. p. 591-603
Sylvie Nadeau, Kurt Landau. 2017 « Industrie 4.0 : Êtes-vous prêts (es)? ». Travail et Santé vol. 33 , nº 2. p. 30
Sylvie Nadeau, Kurt Landau. 2017 « Towards dynamic and adaptive allocation of staff in a digital-organised production context: an innovative perspective from work science ». Journal of Ergonomics vol. 7 , nº 4
Sylvie Nadeau, François Morency. 2017 « De-icing of aircraft : incorporating business risks and occupational health and safety ». International Journal of Safety and Security Engineering vol. 7 , nº 2. p. 247-266
Ali Nemati, Sylvie Nadeau, Barthélemy Ateme-Nguema. 2017 « Lean tools adaptation into mining: An occupational health and safety approach ». Affiche présentée lors de la conférence : Congrès annuel AQHSST (Victoriaville, QC, Canada, 16-18 mai 2017)
Valérie Tuyêt Mai Ngô, Sylvie Nadeau, Stéphane Hallé. 2017 « Ergonomic design of a cooling vest in deep and ultra-deep mining environments ». Occupational Ergonomics vol. 13 , nº S1. p. 115-126
Seyed Ali Niknam, Marek Balazinski, Victor Songmene. 2017 « To characterize and optimize the surface quality attributes in slot milling operation ». International Journal of Advanced Manufacturing Technology vol. 93 , nº 1-4. p. 727-746
Seyed Ali Niknam, Victor Songmene. 2017 « Burr formation and correlation with cutting force and acoustic emission signals ». Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture vol. 231 , nº 3. p. 399-414
X. Rimpault, J. F. Chatelain, J. E. Klemberg-Sapieha, M. Balazinski. 2017 « Tool wear and surface quality assessment of CFRP trimming using fractal analyses of the cutting force signals ». CIRP Journal of Manufacturing Science and Technology vol. 16. p. 72-80
Xavier Rimpault, Jean-François Chatelain, Jolanta Ewa Klemberg-Sapieha, Marek Balazinksi. 2017 « Burr height monitoring while drilling of CFRP/titanium/aluminium stacks ». Mechanics and Industry vol. 18 , nº 1
Louis Rivest. 2017 « Des cas concrets de réussite à l’ère du 4.0 ». Communication lors de la conférence : Colloque sur l’industrie 4.0 (Montréal, QC, Canada, 25 août 2017)
Louis Rivest, Christophe Danjou, Robert Pellerin. 2017 « Positionnements stratégiques pour l’Industrie 4.0 ». Communication lors de la conférence : Entretiens Jacques Cartier : Vers l'Entreprise Aérospatiale Intelligente (Montréal, QC, Canada, 17 oct. 2017)
Mohammad Saadati, Rasoul Azari Khosroshahi, Golamreza Ebrahimi, Mohammad Jahazi. 2017 « Twin-assisted precipitation during hot compression of an Mg-Gd-Zn-Zr magnesium alloy ». Materials Science and Engineering: A vol. 706. p. 142-152
Mohammad Saadati, Rasoul Azari Khosroshahi, Gholamreza Ebrahimi, Mohammad Jahazi. 2017 « Formation of precipitates in parallel arrays on LPSO structures during hot deformation of GZ41K magnesium alloy ». Materials Characterization vol. 131. p. 234-243
V. Sabri, S. Sattarpanah, S. A. Tahan, J. C. Cuillière, V. François, X. T. Pham. 2017 « A robust and automated FE-based method for fixtureless dimensional metrology of non-rigid parts using an improved numerical inspection fixture ». International Journal of Advanced Manufacturing Technology vol. 92 , nº 5-8. p. 2411-2423
M. Slamani, S. Djeffal, J-F. Chatelain. 2017 « Experimental investigation of robotic machining errors of carbon fiber reinforced polymers ». La 3ème Conférence Internationale de Mécanique (ICM) (Annaba, Algérie, 26-27 avril 2017)
H. Slim, S. Nadeau, F. Morency. 2017 « A review of applied methods for aircraft on-ground deicing ».
Binhan Sun, Nicolas Vanderesse, Fateh Fazeli, Colin Scott, Jianqiang Chen, Philippe Bocher, Mohammad Jahazi, Stephen Yue. 2017 « Discontinuous strain-induced martensite transformation related to the Portevin-Le Chatelier effect in a medium manganese steel ». Scripta Materialia vol. 133. p. 9-13
Denis Thibault, Shilan Meimandi, Nicolas Vanderesse, Philippe Bocher, Martin Viens, Myriam Brochu, Martin Gagnon. 2017 « Linking defects found by non-destructive testing in stainless steel castings to the fatigue analysis of hydraulic turbines ». Communication lors de la conférence : 3rd International Symposium on Fatigue Design and Material Defects (FDMD) (Lecco, Italy, Sept. 19-22, 2017)
Amèvi Tongne, Christophe Desrayaud, Mohammad Jahazi, Eric Feulvarch. 2017 « On material flow in friction stir welded al alloys ». Journal of Materials Processing Technology vol. 239. p. 284-296
Heithem Touazine, Jordan Akab, Mohammad Jahazi, Antoine Tahan, Walid Jomaa, Philippe Bocher. 2017 « Modeling of the microstructure alteration induced by hard turning of Inconel 718 ». International Journal of Advanced Manufacturing Technology vol. 93 , nº 9-12. p. 3705-3712
Heithem Touazine, Mohammad Jahazi, Philippe Bocher. 2017 « Accurate determination of damaged subsurface layers in machined Inconel 718 ». International Journal of Advanced Manufacturing Technology vol. 88 , nº 9-12. p. 3419-3427
Christophe Travaglini, Christophe Bescond, Martin Viens, Pierre Belanger. 2017 « Feasibility of high frequency guided wave crack monitoring ». Structural Health Monitoring vol. 16 , nº 4
Ngoc-Hung Vu, Vincent François, Jean-Christophe Cuillière, Xuan-Tan Pham. 2017 « Development of finite strain shell elements for multi-layered fiber-reinforced materials applied for non-rigid parts deformation during assembly process ». Design, Manufacturing and Applications of Composites : Proceedings of the Eleventh Joint Canada-Japan Workshop on Composites and the First Joint Canada-Japan-Vietnam Workshop on Composites August 2016, Ho Chi Minh, Vietnam (Ho Chi Minh, Vietnam, Aug. 08-12, 2016) DEStech publications
Pauline Wyckaert, Sylvie Nadeau, Hakim Bouzid. 2017 « Analysis of risks of pressure vessels ». Gesellschaft für Arbeitswissenschaft : Soziotechnische Gestaltung des digitalen Wandels – kreativ, innovativ, sinnhaft (Zurich, Suisse, Fev. 15-17, 2017) GFA Press
C. Zhang, D. Shahriari, A. Loucif, L. -Ph. Lapierre-Boire, R. Tremblay, H. Melkonyan, M. Jahazi. 2017 « Influence des paramètres de coulée sur la macroségrégation des aciers à haute résistance mécanique dans les lingots de grande taille: expérimentation et modélisation ». Affiche présentée lors de la conférence : ASM-Montreal Student Night (Montreal, QC, Canada, March 15, 2017)
Chunping P. Zhang, Davood Shahriari, Abdelhalim Loucif, Mohammad Jahazi, Louis-Philippe Lapierre-Boire, Rami Tremblay. 2017 « Effect of segregated alloying elements on the high strength steel properties: Application to the large size ingot casting simulation ». TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings (San Diego, CA, USA, Feb. 26-Mar. 02, 2017) Springer International Publishing
Chunping Zhang, Davood Shahriari, Abdelhalim Loucif, Mohammad Jahazi, Louis-Philippe Lapierre-Boire, Rami Tremblay. 2017 « Effect of thermo-physical properties on solidification behavior of large size high strength steel ingots ». 7th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (SteelSim) (Qingdao, China, Aug. 16-17, 2017) The Chinese Society for Metals

Ali Aidibe, Mojtaba Kamali Nejad, Antoine Tahan, Mohammad Jahazi, Sylvain G. Cloutier. 2016 « A proposition for new quality 3D indexes to measure surface roughness ». 7th HPC 2016 - CIRP Conference on High Performance Cutting (Chemnitz, Germany, May 31-June 2, 2016) Elsevier
M. Anderson, F. Bridier, J. Gholipour, M. Jahazi, P. Wanjara, P. Bocher, J. Savoie. 2016 « Mechanical and metallurgical evolution of stainless steel 321 in a multi-step forming process ». Journal of Materials Engineering and Performance vol. 25 , nº 4. p. 1526-1538
Abdoulaye Badiane, Sylvie Nadeau, Jean-Pierre Kenné, Vladimir Polotski. 2016 « Optimizing production while reducing machinery lockout/tagout circumvention possibilities ». Journal of Quality in Maintenance Engineering vol. 22 , nº 2. p. 188-201
Josée Beaudoin, Geneviève Lefebvre, Mélanie Normand, Vanessa Gouri, Alexandre Skerlj, Robert Pellerin, Louis Rivest, Christophe Danjou. 2016 « Prendre part à la révolution manufacturière? Du rattrapage technologique à l’Industrie 4.0 chez les PME ». Québec : Centre francophone d’informatisation des organisations (CEFRIO). 31 p.
Matthieu Bitterlin, Abdelhalim Loucif, Nicolas Charbonnier, Mohammad Jahazi, Louis-Philippe Lapierre-Boire, Jean-Benoît Morin. 2016 « Cracking mechanisms in large size ingots of high nickel content low alloyed steel ». Engineering Failure Analysis vol. 68. p. 122-131
Guillaume Boivin, Martin Viens, Pierre Belanger. 2016 « Development of a low frequency shear horizontal piezoelectric transducer for the generation of plane SH waves ». 42nd annual review of progress in quantitative nondestructive evaluation : incorporating the 6th European-American Workshop on Reliability of NDE (Minneapolis, MN, USA, July 26-31, 2015) AIP Publishing
Conrad Boton, Louis Rivest, Daniel Forgues, Julie Jupp. 2016 « Comparing PLM and BIM from the product structure standpoint ». 13th IFIP WG 5.1 International Conference on Product Lifecycle Management for Digital Transformation of Industries (PLM) 2016 (Columbia, SC, USA, July 11-13, 2016) Springer New York LLC
Daniel Busch, Sylvie Nadeau, François Morency. 2016 « Vers une estimation du risque de lésions musculo-squelettiques dans le dégivrage des avions ».
K. Chadha, D. Shahriari, M. Jahazi. 2016 « Constitutive modelling of ingot breakdown process of low alloy steels ». Metallurgia Italiana vol. 108 , nº 4. p. 5-12
Kanwal Chadha, Davood Shahriari, Mohammad Jahazi. 2016 « Modeling metadynamic recrystallization of a die steel during ingot breakdown process ». NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes (Troyes, France, July 04-07, 2016) EDP Sciences
D.-D. Dang, X.-T. Pham. 2016 « Numerical analysis of turbulent convective heat transfer in a rotor-stator configuration ». In Mathematical and Computational Approaches in Advancing Modern Science and Engineering. p. 413-424. Springer International Publishing
Sébastien Demers, Abdel-Hakim Bouzid, Sylvie Nadeau. 2016 « Effect of Sharpey's fibers on the stress distribution in the anulus fibrosus of an intervertebral disc subjected to compression ». International Review on Modelling and Simulations vol. 9 , nº 6. p. 414-426
Sébastien Demers, Sylvie Nadeau, Abdel-Hakim Bouzid. 2016 « Anisotropic multishell analytical modeling of an intervertebral disk subjected to axial compression ». Journal of Biomechanical Engineering vol. 138 , nº 4
I. Diop, S. Nadeau, B. Emami-Mehrgani. 2016 « Intégration du cadenassage à la planification de la production et de la maintenance ». Affiche présentée lors de la conférence : 38e congrès de l'AQHSST : comportements sécuritaires, les tiens, les miens, les nôtres (Shawinigan, QC, Canada, 18-20 mai 2016)
Berhnam Emami-Mehrgani, Patrick W. Neumann, Sylvie Nadeau, Majid Bazrafshan. 2016 « Considering human error in optimizing production and corrective and preventive maintenance policies for manufacturing systems ». Applied Mathematical Modelling vol. 40 , nº 3. p. 2056-2074
Ameth Fall, Mostafa Hashemi Fesharaki, Ali Reza Khodabandeh, Mohammad Jahazi. 2016 « Tool wear characteristics and effect on microstructure in Ti-6Al-4V friction stir welded joints ». Metals vol. 6 , nº 11. p. 275-286
F. Fareh, V. Demers. 2016 « Rheological behavior of Inconel 718 feedstocks used in low-pressure powder injection molding ». Affiche présentée lors de la conférence : ASM-Montréal : Soirée des étudiants (Montréal, QC, Canada, 9 mars 2016)
F. Fareh, V. Demers, S. Turenne, O. Scalzo. 2016 « Segregation measurement of inconel 718 feedstocks used in low-pressure metal injection molding ». International Conference on Advanced Materials Engineering and Technology (ICAMET) (Kaohsiung City, Taiwan, Dec. 4-5, 2015) Trans Tech Publications Ltd
Fouad Fareh, Vincent Demers, Nicole R. Demarquette, Sylvain Turenne, Orlando Scalzo. 2016 « Molding properties of Inconel 718 feedstocks used in low-pressure powder injection molding ». Advances in Materials Science and Engineering vol. 2016
Mathieu Gendron, Éric Boudreault, Bruce Hazel, Xuan-Tan Pham, Henri Champliaud. 2016 « Non-linear optimization of a new robotic induction process for local heat treatment using thermal finite element analysis ». International Journal of Advanced Manufacturing Technology vol. 84 , nº 5. p. 1013-1029
Seyedbehzad Ghafarizadeh, Jean-François Chatelain, Gilbert Lebrun. 2016 « Effect of cutting tool lead angle on machining forces and surface finish of CFRP laminates ». Science and Engineering of Composite Materials vol. 23 , nº 5. p. 543-550
Seyedbehzad Ghafarizadeh, Jean-François Chatelain, Gilbert Lebrun. 2016 « Finite element analysis of surface milling of carbon fiber-reinforced composites ». International Journal of Advanced Manufacturing Technology vol. 87 , nº 1. p. 399-409
Seyedbehzad Ghafarizadeh, Gilbert Lebrun, Jean-François Chatelain. 2016 « Experimental investigation of the cutting temperature and surface quality during milling of unidirectional carbon fiber reinforced plastic ». Journal of Composite Materials vol. 50 , nº 8. p. 1059-1071
Hadi Ghasemi-Nanesa, Heithem Touazine, Mohammad Jahazi. 2016 « Influence of cryogenic process parameters on microstructure and hardness evolution of AISI D2 tool steel ». International Journal of Advanced Manufacturing Technology vol. 85 , nº 1. p. 881-890
Rupanjit Grewal, Clodualdo Aranas, Kanwal Chadha, Davood Shahriari, Mohammad Jahazi, John J. Jonas. 2016 « Formation of Widmanstatten ferrite at very high temperatures in the austenite phase field ». Acta Materialia vol. 109. p. 23-31
Benjamin Guerineau, Matthieu Bricogne, Alexandre Durupt, Louis Rivest. 2016 « Mechatronics vs. cyber physical systems: towards a conceptual framework for a suitable design methodology ». 11th France-Japan and 9th Europe-Asia Congress on Mechatronics / 17th International Conference on Research and Education in Mechatronics (REM ) (Compiegne, France, June 15-17, 2016) Institute of Electrical and Electronics Engineers Inc.
Benjamin Guerineau, Louis Rivest, Matthieu Bricogne, Alexandre Durupt. 2016 « Agile and project-planned methods in multidisciplinary product design ». 13th IFIP WG 5.1 International Conference on Product Lifecycle Management for Digital Transformation of Industries (PLM) (Columbia, SC, USA, July 11-13, 2016) Springer New York LLC
Servet Günebak, Sylvie Nadeau, François Morency, Oliver Sträeter. 2016 « Aircraft ground deicing as a complex sociotechnical system: towards a safer and more efficient communication process for aircraft ground deicing ». Frühjahrskongress : Arbeit in komplexen Systemen. Digital, vernetzt, human?! (Aachen, Germany, Mars 2-4, 2016) Gesellschaft für Arbeitswissenschaft
Stéphane Hallé, Sylvie Nadeau, Ludwig Vinches, Chady Al-Sayed, Valérie Tuyêt Mai Ngô. 2016 « Développement d’un vêtement de refroidissement individuel adapté au travail en mines profondes : évaluation des technologies existantes ». Communication lors de la conférence : Québec Mines (Québec, QC, Canada, 21-24 nov., 2016)
Nathan Harris, Davood Shahriari, Mohammad Jahazi. 2016 « Analysis of void closure during open die forging process of large size steel ingots ». 16th Metal Forming International Conference (Krakow, Poland, Sept. 18-21, 2016)
W. Jomaa, J. Mechri, J. Lévesque, A. Gakwaya, V. Songmene, P. Bocher. 2016 « Finite element analysis of serrated chip formation in machining of 7075-T651 alluminum alloy ». XXVIII International Mineral Processing Congress (IMPC) (Québec, QC, Canada, Sept. 11-15, 2016)
W. Jomaa, V. Songmene, P. Bocher. 2016 « An investigation of machining-induced residual stresses and microstructure of induction-hardened AISI 4340 steel ». Materials and Manufacturing Processes vol. 31 , nº 7. p. 838-844
Walid Jomaa, Victor Songmene, Philippe Bocher. 2016 « An hybrid approach based on machining and dynamic tests data for the identification of material constitutive equations ». Journal of Materials Engineering and Performance vol. 25 , nº 3. p. 1010-1027
Guy-Richard Kibouka, Donatien Nganga-Kouya, Jean-Pierre Kenne, Victor Songmene, Vladimir Polotski. 2016 « Production planning of a failure-prone manufacturing system under different setup scenarios ». Journal of Applied Mathematics vol. 2016
A. F. Kouedeu, J-P. Kenné, V. Songmene. 2016 « Hybrid control of processing/reprocessing rates for a deteriorated manufacturing system ». 11th International Conference on Modeling, Optimization & Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM
S. G. Lamarre, V. Demers, J-F. Chatelain. 2016 « Experimental study of the rheological properties and moldability of wax-based feedstocks used in low-pressure powder injection molding ». MONTREAL’2016 AES-ATEMA 28th International on Advances and Trends in Engineering Materials and their Applications (Montreal, QC, Canada, June 20-24, 2016) Advanced Engineering Solutions
S. Lamarre, V. Demers, J. F. Chatelain. 2016 « Moldability of feedstock for LPIM ». Affiche présentée lors de la conférence : ASM-Montréal : Soirée des étudiants (Montréal, QC, Canada, 9 mars 2016)
Monique Lortie, Sylvie Nadeau, Steve Vezeau. 2016 « Holistic sustainable development: Floor-layers and micro-enterprises ». Applied Ergonomics vol. 57. p. 8-16
Monique Lortie, Sylvie Nadeau, Steve Vezeau. 2016 « Solutions visant l’amélioration des conditions de santé et de sécurité des poseurs de revêtements de sol ». Montréal : IRSST. 77 p.
J. B. Mandatsy Moungomo, D. Nganga-Kouya, V. Songmene, J. Kouam, J. P. Kenné. 2016 « Machinability study of recycled aluminum cans and machining chips ». International Journal of Advanced Manufacturing Technology vol. 87 , nº 9. p. 2551-2566
Jean Brice Mandatsy Moungomo, Donatien Nganga Kouya, Victor Songmene. 2016 « Aluminium machining chips formation, treatment recycling: A review ». 13th International Aluminium Conference (INALCO 2016) (Naples, Italy, Sept. 21-23, 2016) Trans Tech Publications Ltd
Jean Brice Mandatsy Moungomo, Donatien Nganga Kouya, Victor Songmene. 2016 « Turning and drilling machinability of recycled aluminum alloys ». 13th International Aluminium Conference (INALCO) (Naples, Italy, Sept. 21-23, 2016) Trans Tech Publications Ltd
F. Masoumi, M. Jahazi, D. Shahriari, J. Cormier. 2016 « Coarsening and dissolution of γ′ precipitates during solution treatment of AD730™ Ni-based superalloy: Mechanisms and kinetics models ». Journal of Alloys and Compounds vol. 658. p. 981-995
F. Masoumi, D. Shahriari, M. Jahazi, J. Cormier, A. Devaux. 2016 « Kinetics and mechanisms of γ′ reprecipitation in a Ni-based superalloy ». Scientific Reports vol. 6
Mahdi Masoumi, Yasser Zedan, Damien Texier, Mohammad Jahazi, Philippe Bocher. 2016 « Friction stir welding of AA2024 and AA2198 Aluminum alloys: effect of tool geometry and process parameters ». 2nd International Conference on Welding and Non Destructive Testing (ICWNDT) (Tehran, Iran, Dec. 20-21, 2016)
Mahdi Masoumi, Yasser Zedan, Damien Texier, Mohammad Jahazi, Philippe Bocher. 2016 « The influence of tool geometry on mechanical properties of friction stir welded AA-2024 and AA-2198 joints ». 34th International Conference and Exhibition of ICSOBA (Quebec, QC, Canada, Oct. 03-06, 2016) The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA)
Annick Melanson, Sylvie Nadeau. 2016 « Managing OHS in complex and unpredictable manufacturing systems: can FRAM bring agility? ». Advances in Ergonomics of Manufacturing: Managing the Enterprise of the Future: Proceedings of the AHFE 2016 International Conference on Human Aspects of Advanced Manufacturing, July 27-31, 2016, Walt Disney World®, Florida, USA (Florida, FL, USA, July 27-31, 2016) Springer International Publishing
Fatemeh Mirakhorli, Xinjin Cao, Xuan-Tan Pham, Priti Wanjara, Jean-Luc Fihey. 2016 « Hybrid laser-arc welding of 10-mm-thick cast martensitic stainless steel CA6NM: as-welded microstructure and mechanical properties ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 47 , nº 7. p. 3545-3563
Fatemeh Mirakhorli, Xinjin Cao, Xuan-Tan Pham, Priti Wanjara, Jean-Luc Fihey. 2016 « Post-weld tempered microstructure and mechanical properties of hybrid laser-arc welded cast martensitic stainless steel CA6NM ». Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science vol. 47 , nº 6. p. 3245-3256
Ehsan Mohseni, Martin Viens, Demartonne R. Franca. 2016 « A model-based study of the effect of semi-elliptical surface notch geometry on the signal of a Split-D eddy current probe ». NDT Canada 2016 (Burlington, ON, Canada, Nov. 15-17, 2016) CINDE
A. Mourier, V. Demers, Y. Baril, J. Figueroa. 2016 « Characterization of copper-silver-copper joints fabricated by sintering of silver nanoparticles ». International Conference & Exhibition on Advanced & Nano Materials (ICANM) (Montreal, QC, Canada, Aug. 01-03, 2016)
Sylvie Nadeau, Jean-Pierre Kenné, Behnam Emami-Mehrgani, Adel Badri. 2016 « Advances in integration of equipment lockout/tagout, determination of actual production capacity and production/maintenance planning ». Safety Science Monitor vol. 19 , nº 2
Sylvie Nadeau, François Morency. 2016 « Dégivrer des avions au sol : une activité méconnue et pourtant essentielle ». Communication lors de la conférence : Journées santé, sécurité et mieux-être de l'ÉTS (Montréal, QC, Canada, 12 mai 2016)
Sylvie Nadeau, François Morency. 2016 « Membres chercheurs – universitaires: Comment les apprivoiser? ».
Hadi Ghasemi Nanesa, Julien Boulgakoff, Mohammad Jahazi. 2016 « Influence of prior cold deformation on microstructure evolution of AISI D2 tool steel after hardening heat treatment ». Journal of Manufacturing Processes vol. 22. p. 115-119
V. T. M. Ngô, S. Nadeau, S. Hallé. 2016 « Veste de refroidissement adaptée au travail en mines ultra-profondes, critères ergonomiques ». Affiche présentée lors de la conférence : 38e congrès de l'AQHSST : comportements sécuritaires, les tiens, les miens, les nôtres (Shawinigan, QC, Canada, 18-20 mai 2016)
V. Ngô, S. Nadeau, S. Hallé. 2016 « Facteurs humains appliqués au développement d’une veste refroidissante ». Communication lors de la conférence : Conférence mensuelles en sécurité du travail et contrôle des risques industriels, ÉREST, ÉTS, AQHSST (Montréal, QC, Canada, 16 juin 2016)
Valérie Tuyêt Mai Ngô, Sylvie Nadeau, Justine Mackowiak, Stéphane Hallé. 2016 « Ergonomic challenges in designing personal cooling equipment for ultra-deep mining ». Advances in Ergonomics in Design: Proceedings of the AHFE 2016 International Conference on Ergonomics in Design, July 27-31, 2016, Walt Disney World®, Florida, USA (Florida, FL, USA, July 27-31, 2016) Springer International Publishing
Seyed Ali Niknam, Jules Kouam, Victor Songmene. 2016 « Experimental investigation on part quality and metallic particle emission when milling 6061-T6 aluminium alloy ». International Journal of Machining and Machinability of Materials vol. 18 , nº 1-2. p. 120-137
Felix Nyffenegger, Louis Rivest, Christian Braesch. 2016 « Identifying PLM themes, trends and clusters through ten years of scientific publications ». Product Lifecycle Management for Digital Transformation of Industries :13th IFIP WG 5.1 International Conference, PLM 2016, Columbia, SC, USA, July 11-13, 2016, Revised Selected Papers (Columbia, SC, USA, July 11-13, 2016) Springer
X. T. Pham, N. H. Vu, V. François, J. -C. Cuillière. 2016 « Modeling and numerical simulation of multi-layered fiber-reinforced materials applied for non-rigid parts deformation during assembly process ». Communication lors de la conférence : 7e colloque québécois sur le développement numérique de produits (CAO/FAO) (Montréal, QC, Canada, 4 mai 2016)
X. Rimpault, J. F. Chatelain, J. E. Klemberg-Sapieha, M. Balazinski. 2016 « Surface profile texture characterization of trimmed laminated composite in the stacking sequence direction ». Measurement: Journal of the International Measurement Confederation vol. 91. p. 84-92
Xavier Rimpault, Jean-François Chatelain, Jolanta E. Klemberg-Sapieha, Marek Balazinski. 2016 « Surface profile topography of trimmed and drilled carbon/epoxy composite ». 3rd CIRP Conference on Surface Integrity (Charlotte, NC, United states, June 8-10, 2016) Elsevier
Xavier Rimpault, Jean-François Chatelain, Jolanta-Ewa Klemberg-Sapieha, Marek Balazinski. 2016 « Fractal analysis of cutting force and acoustic emission signals during CFRP machining ». 7th CIRP Conference on High Performance Cutting (Chemnitz, Germany, May 31-June 2, 2016) Elsevier
V. Sabri, S. A. Tahan, X. T. Pham, D. Moreau, S. Galibois. 2016 « Fixtureless profile inspection of non-rigid parts using the numerical inspection fixture with improved definition of displacement boundary conditions ». International Journal of Advanced Manufacturing Technology vol. 82 , nº 5-8. p. 1343-1352
Samira Sadeghi, Thomas Dargon, Louis Rivest, Jean-Philippe Pernot. 2016 « Capturing and analysing how designers use CAD software ». Eleventh International Symposium on Tools and Methods for Competitive Engineering (TMCE’16) (Aix-en-Provence, France, May 9-13, 2016)
Amine Sakouhi, Sylvie Nadeau. 2016 « Integration of occupational health and safety into lean manufacturing: Quebec aeronautics case study ». American Journal of Industrial and Business Management vol. 6 , nº 11. p. 1019-1031
Emad Salari, Mohammad Jahazi, Alireza Khodabandeh, Hadi Ghasemi Nanesa. 2016 « Friction stir lap welding of 5456 aluminum alloy with different sheet thickness: process optimization and microstructure evolution ». International Journal of Advanced Manufacturing Technology vol. 82 , nº 1-4. p. 39-48
G. D. Sathiaraj, C. W. Tsai, J. W. Yeh, M. Jahazi, P. P. Bhattacharjee. 2016 « The effect of heating rate on microstructure and texture formation during annealing of heavily cold-rolled equiatomic CoCrFeMnNi high entropy alloy ». Journal of Alloys and Compounds vol. 688. p. 752-761
D. Shahriari, A. Loucif, N. Harris, Y. Bouissa, M. Jahazi, L. P. Lapierre-Boire, N. Poulain. 2016 « Comprehensive simulation of solidification, forging and heat treatment process of large size high strength steel ingots ». Communication lors de la conférence : The 31st Forging Industry Technical Conference (Colombus, OH, USA, Sept. 19-20, 2016)
Mohamed Slamani, Sébastien Gauthier, Jean-François Chatelain. 2016 « Comparison of surface roughness quality obtained by high speed CNC trimming and high speed robotic trimming for CFRP laminate ». Robotics and Computer-Integrated Manufacturing vol. 42. p. 63-72
A. Tongne, H. Robe, C. Desrayaud, M. Jahazi, E. Feulvarch. 2016 « Two dimensional Coupled Eulerian Lagrangian (CEL) model for banded structure prediction in friction stir welding with trigonal tool ». ESAFORM 2016: 19th International ESAFORM Conference on Material Forming (Nantes, France, Apr. 27-29, 2016) American Institute of Physics
Yaniel Torres, Sylvie Nadeau, François Morency. 2016 « Study of fatigue and workload among aircraft de-icing technicians ». Occupational Ergonomics vol. 13 , nº 2. p. 79-90
Christophe Travaglini, Christophe Bescond, Dermartonne Ramos Franca, Silvio E. Kruger, Martin Viens, Pierre Bélanger. 2016 « Scattering of high order guided wave modes around a through-thickness circular hole ». 42nd annual review of progress in quantitative nondestructive evaluation : incorporating the 6th European-American Workshop on Reliability of NDE (Minneapolis, MN, USA, July 26-31, 2015) AIP Publishing
Mariem Zoghlami, Mohammad Jahazi, Victor Songmene. 2016 « The effects of friction stir welding parameters on the characteristics of banded structure for aluminum alloys ». 13th International Aluminium Conference (INALCO) (Naples, Italy, Sept. 21-23, 2016) Trans Tech Publications Ltd
Mariem Zoghlami, Hossein Monajati, Mohammad Jahazi, Victor Songmene. 2016 « Microstructural analysis of banded structure in friction stir welding of AA6082 aluminum alloy ». Communication lors de la conférence : 34th International Conference and Exhibition of ICSOBA (the International Committee for Study of Bauxite, Alumina & Aluminium) (Québec, QC, Canada, Oct. 03-06, 2016)

Wayne Ablitt, Zachary Mayer, Douglas Morrison, Sylvie Nadeau, Adi Treasurywala. 2015 « Challenges associated with transferring new technologies to the mining industry ». Communication lors de la conférence : CEMI-UDMN panel, Canadian Science Policy Centre (Ottawa, ON, CA, Nov. 26, 2015)
Clodualdo Aranas, Rupanjit Grewal, Kanwal Chadha, Davood Shahriari, Mohammad Jahazi, John J. Jonas. 2015 « Formation of widmanstätten ferrite in a C-Mn steel at temperatures high in the austenite phase field ». International Conference on Solid-Solid Phase Transformations in Inorganic Materials 201 (PTM 2015) (Whistler, BC, Canada, June 28, 2015 - July 3, 2015) International Conference on Solid-Solid Phase Transformations in Inorganic Materials
Agathe Aventin, François Morency, Sylvie Nadeau. 2015 « Statistical study of aircraft accidents and incidents related to de/anti-icing process in Canada between 2009 and 2014 ». 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference. Abstract book (Montreal, QC, Canada, May 19-21, 2015)
A. Bahloul, A. Djebara, M. N. Saidi, V. Songmene. 2015 « Simulating grinding dust dispersion and assessment of the efficiency of local capture ventilation ». Proceedings of the 11th International Conference on Industrial Ventilation (Ventilation 2015) (Shanghai, China, Oct. 26-28, 2015) International Conference on Industrial Ventilation
T. Belhadj, V. Songmene, M. Jahazi. 2015 « Influence des paramètres de procédé sur la distorsion de grandes plaques d'aluminium formées par thermoformage : phase d'éjection ». Affiche présentée lors de la conférence : Journée des étudiants du REGAL (Chicoutimi, QC, Canada, 11 nov. 2015)
G. Bernier, Y. Petit, F. Marchand, P. Terriault, S. Nadeau. 2015 « Chapter 9: Case study : Toy design ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. p. 79-86. Cambridge Scholars Publishing
Lionel Birglen, Benoit Leblanc, Xavier Maldague, Iraj Mantegh, Sylvain Roberge, Martin Viens, Wen-fang Xie. 2015 « Introduction of a robotic system for aerospace manufacturing: The case for non-destructive inspection and beyond ». 62nd CASI Aeronautics Conference (Montreal, QC, Canada, May 19-21, 2015)
Bryan Boudreau-Trudel, Sylvie Nadeau, Kazimierz Zaras. 2015 « Innovative mining equipment: key factors for successful implementation ». American Journal of Industrial and Business Management vol. 5 , nº 4. p. 161-171
Bryan Boudreau-Trudel, Sylvie Nadeau, Kazimierz Zaras. 2015 « Introduction of mining equipment: key factors for sustainable development ». The Proceedings of the 19th Triennial Congress of the International Ergonomics Association. Melbourne, 9-14 August, 2015 (Melbourne, Australia, Aug. 9-14, 2015) International Ergonomics Association
H. H. Boukani, S. M. Chentouf, Martin Viens, S.-Antoine Tahan, M. Gagnon. 2015 « The effect of martensitic stainless steel microstructure on the ultrasonic inspection of turbine runner joints ». AIP Conference Proceedings (Boise, ID, USA, July 20-25, 2014) AIP - American Institute of Physics
H. Bouzid, J. P. Kenné, S. Nadeau, T. Gowings. 2015 « Chapter 2: Case study : Designing a log splitter ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. p. 7-13. Cambridge Scholars Publishing
H. Bouzid, S. Nadeau, J. P. Kenné. 2015 « Chapter 1: Case study : Gasket test rig ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. p. 1-6. Cambridge Scholars Publishing
H. Bouzid, S. Nadeau, J. P. Kenné, C. Giner-Morency. 2015 « Chapter 4: Case study : Designing a hydraulic car lift for small auto repair shops ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. p. 26-36. Cambridge Scholars Publishing
H. Bouzid, S. Nadeau, J. P. Kenné, T. Gowings, C. Giner-Morency. 2015 « Chapter 5: Case study : Designing a boom lift ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. p. 37-55. Cambridge Scholars Publishing
D. Camara, S. Nadeau, S. Echchakoui. 2015 « Perceptions des mineurs de mines ultraprofondes ». 37e Congrès AQHSST (Saint-Sauveur, QC, Canada, 20-22 mai 2015)
Mathieu Carrier, Mathieu Dansereau, Julio Fernandes, Jean-Sébastien Mérette, Yvan Petit, Victor Songmene. 2015-05-12 « Alésoir acétabulaire ». Brevet canadien CA 2696990.
K. Chadha, D. Shahriari, M. Jahazi. 2015 « Constitutive modelling of ingot breakdown process of low alloy steels ». 6th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (SteelSim 2015) (Bardolino, Italy, Sept. 23-25, 2015) Associazione Italiana di Metallurgia
Kanwal Chadha, Pinaki Prasad Bhattacharjee, Mohammad Jahazi. 2015 « The effect of strain reversal during high pressure torsion on the microstructure evolution and texture of aluminum alloys ». Characterization of Minerals, Metals, and Materials 2015 - TMS 2015 144th Annual Meeting and Exhibition, March 15, 2015 - March 19, 2015 (Orlando, FL, USA, March 15-19, 2015) Minerals, Metals and Materials Society
Kanwal Chadha, Mohammad Jahazi, Abdelhalim Loucif, Davood Shahriari. 2015 « Effect of deformation temperature and interpass time on microstructure evolution and mechanical properties of medium carbon low alloy steel during ingot breakdown process ». 2015 TMS Annual Meeting & Exhibition : Phase Transformations and Microstructural Evolution (Orlando, FL, Canada, Mar. 15-19, 2015)
A. Chamanfar, M. Jahazi, A. Bonakdar, E. Morin, A. Firoozrai. 2015 « Cracking in fusion zone and heat affected zone of electron beam welded Inconel-713LC gas turbine blades ». Materials Science and Engineering: A vol. 642. p. 230-240
A. Chamanfar, Mohammad Jahazi, J. Cormier. 2015 « A review on inertia and linear friction welding of Ni-based superalloys ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 46 , nº 4. p. 1639-1669
A. Chamanfar, Mohammad Jahazi, J. Gholipour, P. Wanjara, S. Yue. 2015 « Analysis of integrity and microstructure of linear friction welded Waspaloy ». Materials Characterization vol. 104. p. 149-161
Samir Mourad Chentouf, T. Belhadj, N. Bombardier, M. Jahazi. 2015 « Influence of reduction rate on the characteristics of cavities in superplastically formed 5083 aluminum alloy ». 54th annual conference of metallurgists (COM 2015) (Toronto, ON, Canada, Aug. 23-26, 2015)
D-D. Dang, X. T. Pham. 2015 « Numerical analysis of turbulent convective heat transfer in a rotor-stator configuration ». 23rd Annual Conference of the Computational Fluid Dynamics Society of Canada (CFDSC 2015) (Waterloo, ON, Canada, June 7-12, 2015)
M. Daoud, J. F. Chatelain, A. Bouzid. 2015 « Effect of rake angle on Johnson-Cook material constants and their impact on cutting process parameters of Al2024-T3 alloy machining simulation ». International Journal of Advanced Manufacturing Technology vol. 81 , nº 9-12. p. 1987-1997
M. Daoud, W. Jomaa, J. F. Chatelain, A. Bouzid. 2015 « A machining-based methodology to identify material constitutive law for finite element simulation ». International Journal of Advanced Manufacturing Technology vol. 77 , nº 9-12. p. 2019-2033
V. Demers, S. Turenne, O. Scalzo. 2015 « Impact of binders on viscosity of low-pressure powder injection molded Inconel 718 superalloy ». Journal of Materials Science vol. 50 , nº 7. p. 2893-2902
Vincent Demers, Sylvain Turenne, Orlando Scalzo. 2015 « Segregation measurement of powder injection molding feedstock using thermogravimetric analysis, pycnometer density and differential scanning calorimetry techniques ». Advanced Powder Technology vol. 26 , nº 3. p. 997-1004
F. Demy, Sylvie Nadeau, Jean-Pierre Kenné. 2015 « Integration of production planning, scheduling and lockout/tagout activities in a manufacturing system ». Gesellschaft für Arbeitswissenschaft (Karlsruhe, Germany, Feb. 25-27, 2015)
E. Desire, S. Nadeau, B. Boudreau-Trudel. 2015 « Design of control panels for underground mining equipment: Why open innovation should be promoted as a sustainable approach to development ». Affiche présentée lors de la conférence : 19th Triennial Congress of the International Ergonomics Association (Melbourne, Australia, Aug. 9-14, 2015)
F. Fareh, V. Demers, S. Turenne, O. Scalzo. 2015 « Segregation measurement of Inconel 718 feedstocks used in low-pressure metal injection molding ». Communication lors de la conférence : International Conference on Advanced materials engineering & technology (ICAMET 2015) (Kaohsiung, Taiwan, Dec. 4-6, 2015)
Kouedeu Annie Francie, Kenne Jean-Pierre, Dejax Pierre, Songmene Victor, Polotski Vladimir. 2015 « Stochastic models and numerical solutions for manufacturing/remanufacturing systems with applications to the printer cartridge industry ». Journal of Manufacturing Systems vol. 37 , nº Part 3. p. 662-671
H. Ghasemi Nanesa, Mohammad Jahazi. 2015 « Alternative phase transformation path in cryogenically treated AISI D2 tool steel ». Materials Science and Engineering: A vol. 634. p. 32-36
Hadi Ghasemi-Nanesa, Mohammad Jahazi, Reza Naraghi. 2015 « Martensitic transformation in AISI D2 tool steel during continuous cooling to 173K ». Journal of Materials Science vol. 50 , nº 17. p. 5758-5768
Servet Günebak, Sylvie Nadeau, François Morency, Oliver Sträter. 2015 « Towards a safer and more efficient communication process for aircraft ground deicing: review of human factors and team communication literature ». 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference. Abstract book (Montreal, QC, Canada, May 19-21, 2015)
Stéphane Hallé, Julien Fatisson, Sylvie Nadeau, Ludwig Vinches. 2015 « Cooling technologies for reducing thermal constraints in deep under-ground mines : OHS challenges ». The Proceedings of the 19th Triennial Congress of the International Ergonomics Association. Melbourne, 9-14 August, 2015 (Melbourne, Australia, Aug. 9-14, 2015) International Ergonomics Association
Stéphane Hallé, Sylvie Nadeau, Julien Fatisson. 2015 « Engineered containment and control of airborne nanoparticles: current status ». International Journal of Safety and Security Engineering vol. 5 , nº 4. p. 336-351
T. Hamon, R. Pellerin, Louis Rivest. 2015 « La conduite de projets de transformation de processus dans le secteur aérospatial : une revue critique des méthodologies de réingénierie ». 2e Conférence internationale en gestion de projet de l’UQTR (Trois-Rivières, QC, Canada, 28-29 mai 2015)
J. P. Kenné, H. Bouzid, S. Nadeau, C. Giner-Morency. 2015 « Chapter 14: Case study : Designing a lift truck ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. p. 122-128. Cambridge Scholars Publishing
J. P. Kenné, H. Bouzid, S. Nadeau, C. Giner-Morency. 2015 « Chapter 6: Case study : Designing an aerial work platform vehicle ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. p. 54-63. Cambridge Scholars Publishing
J. P. Kenné, S. Nadeau, H. Bouzid, C. Giner-Morency. 2015 « Chapter 12: Case study: automated overhead crane ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. p. 105-113. Cambridge Scholars Publishing
Jules Kouam, Victor Songmene, Marek Balazinski, Patrick Hendrick. 2015 « Effects of minimum quantity lubricating (MQL) conditions on machining of 7075-T6 aluminum alloy ». International Journal of Advanced Manufacturing Technology vol. 79 , nº 5. p. 1325-1334
A. F. Kouedeu, J.-P. Kenné, P. Dejax, V. Songmene, V. Polotski. 2015 « Production and maintenance planning for a failure-prone deteriorating manufacturing system: a hierarchical control approach ». International Journal of Advanced Manufacturing Technology vol. 76 , nº 9. p. 1607-1619
Jacques Lavoie, Geneviève Marchand, Yves Cloutier, Yves Beaudet, Stéphane Hallé, Sylvie Nadeau, Gilbert Pichette, Caroline Duchaine. 2015 « Bronchoscopie en milieu hospitalier : Évaluation des expositions aux bioaérosols ». IRSST.
Jacques Lavoie, Geneviève Marchand, Yves Cloutier, Stéphane Hallé, Sylvie Nadeau, Caroline Duchaine, Gilbert Pichette. 2015 « Evaluation of bioaerosol exposures during hospital bronchoscopy examinations ». Environmental Science: Processes & Impacts vol. 17 , nº 2. p. 288-299
E. Lescure, S. Nadeau, F. Morency. 2015 « Ingénierie et résilience: dégivrage d'avions ». Travail et Santé vol. 31 , nº 2. p. 48
Eric Lescure, Sylvie Nadeau, François Morency. 2015 « PME et SST : Quand la résilience est un modèle d’affaires ». 50ème congrès de la Société d'Ergonomie de Langue Française (Paris, France, 23-25 sept. 2015) SELF
Hugues Lessard, Gilbert Lebrun, Abdelhaq Benkaddour, Xuan-Tan Pham. 2015 « Influence of process parameters on the thermostamping of a [0/90]12 carbon/polyether ether ketone laminate ». Composites Part A: Applied Science and Manufacturing vol. 70. p. 59-68
Romain Leurs, François Morency, Sylvie Nadeau. 2015 « Détection de proximité avion-nacelle pour les opérations de dégivrage ». Substance ÉTS
Abdelhalim Loucif, Emna Ben Fredj, Mohammad Jahazi, Louis-Philippe Lapierreboire, Rami Tremblay, Raymond Beauvais. 2015 « Analysis of macrosegregation in large size forged ingot of high strength steel ». Proceedings of the 6th International Congress on the Science and Technology of Steelmaking (ICS 2015) (Beijing, China, May 12-14, 2015) Chinese Society for Metals
Ilyes Maamri, Noureddine Barka, Abderrazak El Ouafi, Mohammad Jahazi. 2015 « A sensitivity study of 4340 steel hardness profile heat-treated by laser ». International Journal of Emerging Technology and Advanced Engineering vol. 5 , nº 9. p. 7-13
Fatemeh Mirakhorli, Xinjin Cao, Xuan Tan Pham, Priti Wanjara, Jean-Luc Fihey. 2015 « Hybrid laser-arc welding of cast martensitic stainless steel CA6NM: Post-weld tempered microstructure and mechanical properties ». Conference of metallurgists (COM 2015) (Toronto, ON, Canada, Aug. 23-26, 2015)
Guillaume Mullier, Jean-François Chatelain. 2015 « Influence of thermal damage on the mechanical strength of trimmed CFRP ». International Journal of Mechanical and Mechatronics Engineering vol. 9 , nº 8. p. 1559-1566
Guillaume Mullier, Jean-François Chatelain. 2015 « Influence of thermal damage on the mechanical strength of trimmed CFRP ». 17th International Conference on Materials Science, Metal and Manufacturing (ICMSMM 2015) (Barcelona, Spain, Aug. 17-18, 2015)
Guillaume Mullier, Jean-François Chatelain. 2015 « Influence of thermal damage on the mechanical strength of trimmed CFRP ». Communication lors de la conférence : 17th International Conference on Materials Science, Metal and Manufacturing (ICMSMM 2015) (Barcelona, Spain, Aug. 17-18, 2015)
Sylvie Nadeau, Yvan Petit, Stéphane Hallé, François Morency, Louis Dufresne. 2015 « Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics ». Newcastle upon Tyne, UK : Cambridge Scholars Publishing. 180 p.
S. Nadeau. 2015 « Initiation à la gestion intégrée des risques ». Communication lors de la conférence : 37e Congrès AQHSST (Saint-Sauveur, QC, Canada, 20-22 mai 2015)
S. Nadeau, J. Arteau, C. Giner-Morency. 2015 « Chapter 11: Case study : Hybrid vehicle ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. p. 98-104. Cambridge Scholars Publishing
S. Nadeau, B. H. Ateme-Nguema, C. Benedetti, C. Vachon. 2015 « Chapter 15: Case study: J. L. Vachon: Industry leader and pioneer ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. p. 129-141. Cambridge Scholars Publishing
S. Nadeau, H. Bouzid, J. P. Kenné, C. Giner-Morency. 2015 « Chapter 13: Designing an airplane baggage belt loader ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. p. 114-121. Cambridge Scholars Publishing
S. Nadeau, S. Hallé. 2015 « Integrating OHS in mechanical engineering curriculum: a decade of innovation at ÉTS ». Communication lors de la conférence : Minerva Learning Forum (Montreal, QC, Canada, June 9, 2015)
S. Nadeau, F. Morency, J-R. Nsangou. 2015 « Le lean mining et les défis associés à la SST ». Communication lors de la conférence : Colloque régional 2015 en santé et sécurité minière. Association paritaire pour la santé et la sécurité du travail secteur minier (Rouyn-Noranda, QC, Canada, 18 mars 2015)
S. Nadeau, François Morency, Jacques Robert Nsangou. 2015 « The contextualisation of lean manufacturing in the mining sector: forseeable challenges to occupational health and safety ». The Proceedings of the 19th Triennial Congress of the International Ergonomics Association. Melbourne, 9-14 August, 2015 (Melbourne, Australia, Aug. 9-14, 2015) International Ergonomics Association
Sylvie Nadeau. 2015 « Efficacité et efficience, un équilibre à atteindre ». Travail et Santé vol. 31 , nº 5. p. 8
Sylvie Nadeau, Stéphane Hallé. 2015 « Mines ultra-profondes : quand la chaleur et l’humidité deviennent intenables ». Communication lors de la conférence : Expo Hightex 2015 (Boucherville, QC, Canada, 25-26 mars 2015)
Hadi Ghasemi Nanesa, Mohammad Jahazi, Tom Levasseur. 2015 « On the martensitic transformation of AISI D2 tool steel through cryogenic cooling ». International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 (PTM 2015) (Whistler, BC, Canada, June 28-July 3, 2015) International Conference on Solid-Solid Phase Transformations in Inorganic Materials
Hadi Ghasemi Nanesa, Mohammad Jahazi, Tom Levasseur. 2015 « Transmission electron microscopy study of micro-structure evolution in cryotreated AISI D2 tool steel ». International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 (PTM 2015) (Whistler, BC, Canada, June 28-July 3, 2015) International Conference on Solid-Solid Phase Transformations in Inorganic Materials
Hong-Den Nguyen, Martin Deshaies, Xuan-Tan Pham. 2015 « Simulation-assisted mold design for forming of thermoplastic PPS/ carbon fiber composites ». 62nd CASI Aeronautics Conference (Montreal, QC, Canada, May 18-21, 2015)
Sy Quy Nguyen, Jean-Francois Chatelain. 2015 « Study of the milling process for thin components using a flexible setup configuration ». Applied Mechanics and Materials vol. 704. p. 27-31
Seyed Ali Niknam, Victor Songmene. 2015 « Milling burr formation, modeling and control: A review ». Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture vol. 229 , nº 6. p. 893-909
P-C. Ostiguy, M. H. Sherafat, D. R. Franca, N. Bouslama, N. Quaegebeur, A. Maslouhi, L. Lessard, P. Hubert, M. Viens, M. R. Mofakhami, Z. Hajjar, P. Masson. 2015 « Selection of structural features for the systematic study of guided wave propagation and interaction with damage ». Structural health monitoring 2015 : System Reliability for Verification and Implementation (Stanfort, CA, USA, Sept. 1-3, 2015) Destech Publications
Romain Pinquié, Louis Rivest, Frédéric Segonds, Philippe Véron. 2015 « An illustrated glossary of ambiguous PLM terms used in discrete manufacturing ». International Journal of Product Lifecycle Management vol. 8 , nº 2. p. 142-171
S. Prokoshkin, V. Brailovski, K. Inaekyan, V. Demers, A. Kreitcberg. 2015 « Nanostructured Ti–Ni shape memory alloys produced by thermomechanical processing ». Shape Memory and Superelasticity vol. 1 , nº 2. p. 191-203
Xavier Rimpault, Jean-François Chatelain, J.E. Klemberg-Sapieha, M. Balazinksi. 2015 « A new approach for surface profile roughness characterization in the laminated composite ply plane ». 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference (Montreal, QC, Canada, May 19-21, 2015) Canadian Aeronautics and Space Institute
Xavier Rimpault, Jean-François Chatelain, J.E. Klemberg-Sapieha, M. Balazinski. 2015 « Surface condition of high speed trimming of CFRP ». 6th International Conference on science and technology of composite materials (COMAT) (Buenos Aires, Argentina, May 7-8, 2015)
Xavier Rimpault, Jean-François Chatelain, Jolanta E. Klemberg-Sapieha, Marek Balazinksi. 2015 « Surface quality assessment of CFRP high speed trimming using fractal analyses of the cutting force signals ». 4th international conference on virtual machining process technology (VMPT 2015) (Vancouver, BC, Canada, June 2-5, 2015)
Xavier Rimpault, Jean-François Chatelain, Jolanta E. Klemberg-Sapieha, Marek Balazinksi. 2015 « Tool wear impact on surface roughness condition of CFRP high speed trimming ». 4th international conference on virtual machining process technology (VMPT 2015) (Vancouver, BC, Canada, June 2-5, 2015)
M. N. Saidi, Victor Songmene, J. Kouam, A. Bahloul. 2015 « Experimental investigation on fine particle emission during granite polishing process ». International Journal of Advanced Manufacturing Technology vol. 81 , nº 9. p. 2109-2121
D. Shahriari, Abdelhalim Loucif, Mohammad Jahazi, R. Tremblay, R. Beauvais. 2015 « 3D numerical simulation of solidification of large size ingots of high strength steels ». 6th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (STEELSIM2015) (Bardolino, Italy, Sept. 23-25, 2015)
M. Slamani, J. F. Chatelain. 2015 « High-speed robotic trimming of CFRP ». In Machinability of Fibre-Reinforced Plastics. p. 83-101. De Gruyter
Mohamed Slamani, Jean-François Chatelain. 2015 « Issues and challenges in robotic trimming of CFRP ». ICINCO 2015 - 12th International Conference on Informatics in Control, Automation and Robotics, Proceedings (Colmar, Alsace, France, July 21-23, 2015) SciTePress
Mohamed Slamani, Jean-François Chatelain. 2015 « Issues and challenges in robotic trimming of CFRP ». Communication lors de la conférence : ICINCO 2015 - 12th International Conference on Informatics in Control, Automation and Robotics (Colmar, Alsace, France, July 21-23, 2015)
Mohamed Slamani, Jean-François Chatelain, Hossein Hamedanianpour. 2015 « Comparison of two models for predicting tool wear and cutting force components during high speed trimming of CFRP ». International Journal of Material Forming vol. 8 , nº 2. p. 305-316
Mohamed Slamani, Sébastien Gauthier, Jean-François Chatelain. 2015 « A study of the combined effects of machining parameters on cutting force components during high speed robotic trimming of CFRPs ». Measurement: Journal of the International Measurement Confederation vol. 59. p. 268-283
Victor Songmene, Riad Khettabi, Martin Viens, Jules Kouam, Stéphane Hallé, François Morency, Jacques Masounave, Abdelhakim Djebara. 2015 « Nanoparticle measurement, control and characterization: procedure applied to machining and mechanical friction ». IRSST. 82 p.
Victor Songmene, R. Njoya Doko. 2015 « Fine metallic particle emission when milling aluminium alloys and aluminium metal matrix composites ». 7th Light Metals Technology Conference (LMT2015) (Port Elizabeth, South Africa, July 27-29, 2015) Trans Tech Publications
A. Tongne, Mohammad Jahazi, E. Feulvarch, C. Desrayaud. 2015 « Banded structures in friction stir welded Al alloys ». Journal of Materials Processing Technology vol. 221. p. 269-278
Amèvi Tongne, Christophe Desrayaud, Mohammad Jahazi, Eric Feulvarch. 2015 « Analytical modeling of material flow in friction stir welding ». 11th International Seminar on Numerical Analysis of Weldability (Graz, Austria, Sept. 27-30, 2015)
Yaniel Torres, François Morency, Sylvie Nadeau. 2015 « Fatigue et dégivrage d’avions au sol ». Travail et Santé vol. 31 , nº 4. p. 9-11
Bryan Trudel, Sylvie Nadeau, Kazimierz Zaras, Isabelle Deschamps. 2015 « Managing equipment innovations in mining: A review ». Work: A Journal of Prevention, Assessment & Rehabilitation vol. 51 , nº 4. p. 731-746
L. Vinches, S. Hallé, S. Nadeau. 2015 « Amélioration du confort thermique en mines profondes ». Conférence mensuelles en sécurité du travail et contrôle des risques industriels, ÉREST, ÉTS, AQHSST (Montréal, QC, Canada, 12 mars 2015)
J. Zheng, W. F. Xie, Martin Viens, L. Birglen, I. Mantegh. 2015 « Design of an advanced automatic inspection system for aircraft parts based on fluorescent penetrant inspection analysis ». Insight: Non-Destructive Testing and Condition Monitoring vol. 57 , nº 1. p. 18-24 and 34

Noureddine Barka, Ahmed Chebak, Abderrazak El Ouafi, Mohammad Jahazi, Abdellah Menou. 2014 « A new approach in optimizing the induction heating process using flux concentrators: Application to 4340 steel spur gear ». Journal of Materials Engineering and Performance vol. 23 , nº 9. p. 3092-3099
M. C. Benabderrahmane, Sylvie Nadeau, A. Badri. 2014 « Safety and sustainability in mining industry ». Kongress der Gesellschaft für Arbeitswissenschaften - Gestaltung der Arbeitswelt der Zukunft (Munich, Germany, Mar. 12-14, 2014) GfA-Press
Guillaume Bolduc, Louis Rivest. 2014 « Structural steel truck loading problem: documenting expert loaders reasoning ». Proceedings of the 2014 International Conference on Innovative Design and Manufacturing (ICIDM) (Montreal, QC, Canada, Aug. 13-15, 2014) IEEE
B. Boudreau-Trudel, S. Nadeau, K. Zaras, I. Deschamps. 2014 « Dix implantations de projets innovants en équipement minier: leurs impacts et leurs facteurs de réussite ». Communication lors de la conférence : Colloque régional 2014 en santé et sécurité minière. Asociation paritaire pour la santé et la sécurité du travail secteur minier (APSM) (Val-d'or, QC, Canada, 19 mars 2014)
Bryan Boudreau-Trudel, Sylvie Nadeau, Kazimierz Zaras, Isabelle Deschamps. 2014 « Introduction of innovative equipment in mining: impact on occupational health and safety ». Open Journal of Safety Science and Technology vol. 4 , nº 1. p. 49-58
Bryan Boudreau-Trudel, Kazimiers Zaras, Sylvie Nadeau, Isabelle Deschamps. 2014 « Introduction of innovative equipment in mining: impact on productivity ». American Journal of Industrial and Business Management vol. 4 , nº 1. p. 31-39
Bryan Boudreau-Trudel, Kazimierz Zaras, Sylvie Nadeau, Isabelle Deschamps. 2014 « Les facteurs de réussite dans l'implantation de projets d'équipement minier innovant ». IV International Conference on Regional and Local Projects - the Role of Competencies (Katowice, Pologne, 10-11 juin 2014)
H. H. Boukani, Martin Viens, S.-Antoine Tahan, M. Gagnon. 2014 « On the performance of nondestructive testing methods in the hydroelectric turbine industry ». 27th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2014) (Montreal, QC, Canada, Sept. 22-26, 2014) IOP Publishing
M. Bricogne, Louis Rivest, N. Troussier, B. Eynard. 2014 « Concurrent versioning principles for collaboration: towards PLM for hardware and software data management ». International Journal of Product Lifecycle Management vol. 7 , nº 1. p. 17-37
A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, S. Yue. 2014 « Evolution of flow stress and microstructure during isothermal compression of Waspaloy ». Materials Science and Engineering: A vol. 615. p. 497-510
S. M. Chentouf, M. Jahazi, L. P. Lapierre-Boire, S. Godin. 2014 « Characteristics of austenite transformation during post forge cooling of large-size high strength steel Ingots ». Metallography, Microstructure, and Analysis vol. 3 , nº 4. p. 281-297
Samir Mourad Chentouf, Mohammad Jahazi, Rejean Fortin. 2014 « Influence of the quench process on microstructure evolution in a landing gear steel ». ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014) American Society of Mechanical Engineers (ASME)
Mostafa Dadaei, Hamid Omidvar, Behrouz Bagheri, Mohammad Jahazi, Mahmoud Abbasi. 2014 « The effect of SiC/Al2O3 particles used during FSP on mechanical properties of AZ91 magnesium alloy ». International Journal of Materials Research vol. 105 , nº 4. p. 369-374
M. Daoud, W. Jomaa, Jean-François Chatelain, Abdel-Hakim Bouzid, Victor Songmene. 2014 « Identification of material constitutive law constants using machining tests: A response surface methodology based approach ». 2014 International Conference on High Performance and Optimum Design of Structures and Materials, HPSM 2014 which incorporated the Seminar on Optimum Design in Engineering, OPTI 2014 (Ostend, Belgium, June 9-11, 2014) WITPress
Monzer Daoud, Jean-François Chatelain, Hakim Bouzid. 2014 « On the effect of Johnson Cook material constants to simulate Al2024-T3 machining using finite element modeling ». ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014) American Society of Mechanical Engineers (ASME)
Abdelhakim Djebara, Ali Bahloul, Bernard Wenga Ntcheping, Victor Songmene. 2014 « Dilution method to characterize fine and ultrafine particle at high concentrations ». Conference Proceedings : 1st International Conference on Atmospheric Dust : DUST 2014 (Castellaneta Marina, Italy, June 1-6, 2014) Digilabs Publishing
Abdelhakim Djebara, Ali Bahloul, Victor Songmene. 2014 « Technique de dilution des concentrations de la poussière émise lors de la transformation des matériaux ». 36e Congrès de l'AQHSST :Bien s'outiller pour intervenir: se développer, se spécialiser, se renouveler : Congrès de l'Association québécoise pour l’hygiène, la santé et la sécurité du travail (Beaupré, QC, Canada, 7-9 mai 2014) Association québécoise pour l’hygiène, la santé et la sécurité du travail
Gholam Reza Ebrahimi, Amir Momeni, Mohammad Jahazi, Philippe Bocher. 2014 « Dynamic recrystallization and precipitation in 13Cr super-martensitic stainless steels ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 45 , nº 4. p. 2219-2231
Behnam Emami-Mehrgani, Sylvie Nadeau, Jean-Pierre Kenné. 2014 « Optimal lockout/tagout, preventive maintenance, human error and production policies of manufacturing systems with passive redundancy ». Journal of Quality in Maintenance Engineering vol. 20 , nº 4. p. 453-470
Seyedbehzad Ghafarizadeh, Jean-François Chatelain, Gilbert Lebrun. 2014 « Experimental investigation to study cutting temperature during milling of unidirectional Carbon Fiber Reinforced Plastic ». ASME 2014 International Mechanical Engineering Congress and Exposition, IMECE 2014, November 14, 2014 - November 20, 2014 (Montreal, QC, Canada, Nov. 14-20, 2014) American Society of Mechanical Engineers (ASME)
Hadi Ghasemi-Nanesa, Mohammad Jahazi. 2014 « Simultaneous enhancement of strength and ductility in cryogenically treated AISI D2 tool steel ». Materials Science and Engineering: A vol. 598. p. 413-419
Hadi Ghasemi-Nanesa, Mohammad Jahazi, Gil Trigo, Tom Levasseur. 2014 « Influence of cryogenic treatment on microstructure characteristics and mechanical properties of AISI D2 tool steel ». TMS 2014 Supplemental Proceedings John Wiley & Sons, Inc.
W. Jomaa, Victor Songmene, Philippe Bocher. 2014 « Surface finish and residual stresses induced by orthogonal dry machining of AA7075-T651 ». Materials vol. 7 , nº 3. p. 1603-1624
Walid Jomaa, Monzer Daoud, Victor Songmene, Philippe Bocher, Jean-François Châtelain. 2014 « Identification and validation of Marusich's constitutive law for finite element modeling of high speed machining ». ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014) American Society of Mechanical Engineers (ASME)
Walid Jomaa, Victor Songmene, Philippe Bocher. 2014 « Material behavior modeling during high speed machining of 6061-T6 and 7075-T651 alloys ». Affiche présentée lors de la conférence : Journée des étudiants du REGAL (JER2014) (Sherbrooke, QC, Canada, Nov. 18, 2014)
R. Kamguem, S.-Antoine Tahan, Victor Songmene. 2014 « Surface roughness estimation of turned parts from optical image measurements and wavelet decomposition ». International Journal of Materials Forming and Machining Processes vol. 1 , nº 1. p. 48-72
R. Keivani, Mohammad Jahazi, Tan Pham, A. R. Khodabandeh, M. R. Afshar. 2014 « Predicting residual stresses and distortion during multisequence welding of large size structures using FEM ». International Journal of Advanced Manufacturing Technology vol. 73 , nº 1-4. p. 409-419
Jules Kouam, Abdelhakim Djebara, Victor Songmene. 2014 « Experimental investigation on the effect of pre-holes on drilling process performance of aluminum alloys: forces, surface finish and dust emission ». Advances in Materials Science and Applications vol. 3 , nº 1. p. 13-23
A. F. Kouedeu, J. P. Kenné, P. Dejax, V. Songmene, V. Polostki. 2014 « Stochastic models and numerical solutions for manufacturing/remanufacturing systems with applications to the printer cartridge industry ». Affiche présentée lors de la conférence : Journée des étudiants du REGAL (JER2014) (Sherbrooke, QC, Canada, Nov. 18, 2014)
Annie Francie Kouedeu, Jean-Pierre Kenné, Pierre Dejax, Victor Songmene, Vladimir Polotski. 2014 « Production planning of a failure-prone manufacturing/remanufacturing system with production-dependent failure rates ». Applied Mathematics vol. 5 , nº 10. p. 1557-1572
Annie Francie Kouedeu, Jean-Pierre Kenné, Pierre Dejax, Victor Songmene, Vladimir Polotski. 2014 « Stochastic optimal control of manufacturing systems under production-dependent failure rates ». International Journal of Production Economics vol. 150. p. 174-187
J. Lavoie, G. Marchand, Y. Cloutier, S. Hallé, S. Nadeau, C. Duchaine, G. Pichette. 2014 « Evaluation of bioaerosol exposures during hospital bronchoscopy examinations ». AIRMON 2014: 8th International Symposium on Modern Principles for Air Monitoring and Biomonitoring (Marseille, France, 15-19 juin 2014) Royal Society of Chemistry
M. Lortie, S. Vezeau, T. Gowings, J. Fatisson, Sylvie Nadeau, I. Kefi, F. Chaouch. 2014 « Holistic sustainable development : Floor-laying workers’ case ». 11th International Symposium on Human Factors invOrganisational Design and Management (ODAM) & 46th Annual Nordic Ergonomics Society Conference (NES) (Copenhagen, Denmark, Aug. 17-20, 2014)
Borhen Louhichi, Louis Rivest. 2014 « Maintaining consistency between CAD elements in collaborative design using association management and propagation ». Computers in Industry vol. 65 , nº 1. p. 124-135
B. Marquis, Sylvie Nadeau, François Morency. 2014 « Impacts of lean management on occupational health and safety in aircraft maintenance ». Kongress der Gesellschaft für Arbeitswissenschaften - Gestaltung der Arbeitswelt der Zukunft (Munich, Germany, Mar. 12-14, 2014) GfA-Press
Fatemeh Masoumi, Mohammad Jahazi, J. Cormier, D. Shahriari. 2014 « Dissolution kinetics and morphological changes of γ′ in AD730TM superalloy ». 2nd European Symposium on Superalloys and Their Applications, EUROSUPERALLOYS 2014 (Giens, France, May 12-16, 2014)
P. Masson, A. Maslouhi, P. Micheau, N. Quaegebeur, L. Lessard, P. Hubert, M. Viens, S. Kruger, M. R. Mofakhami, J. Pinsonnault, Z. Hajjar, P-C. Ostiguy, M. Sherafat, D. Ramos Franca. 2014 « Characterization of guided wave propagation in aircraft structures ». Affiche présentée lors de la conférence : 1er Forum du Réseau national | 7e Forum du CRIAQ (Montreal, QC, Canada, Apr. 16-17, 2014)
A. Melanson, Sylvie Nadeau. 2014 « L’application des principes de l’ingénierie de la résilience peut-elle permettre une prévention durable, efficace et efficiente dans le contexte de changement que connait l’ensemble du secteur manufacturier québécois? ». Congrès AQHSST-RRSSTQ (Mont Sainte-Anne, QC, Canada, 7-9 mai 2014)
F. Mirakhorli, X. Cao, Tan Pham, P. Wanjara, Jean-Luc Fihey. 2014 « Hybrid fiber laser-arc welding of 10-mm thick CA6NM stainless steel ». Materials Science and Technology Conference and Exhibition 2014, MS and T 2014 (Pittsburgh, PA, USA, Oct. 12-16, 2014) Association for Iron and Steel Technology, AISTECH
A. Momeni, G. R. Ebrahimi, Mohammad Jahazi, Philippe Bocher. 2014 « Microstructure evolution at the onset of discontinuous dynamic recrystallization: a physics-based model of subgrain critical size ». Journal of Alloys and Compounds vol. 587. p. 199-210
François Morency, Sylvie Nadeau. 2014 « Maintenance d'aéronefs: génie des facteurs humains du dégivrage ». Travail et Santé vol. 30 , nº 1. p. 24
E. Morinière, François Morency, Sylvie Nadeau. 2014 « Ethylene Glycol and workers: a study of documented exposures ». Kongress der Gesellschaft für Arbeitswissenschaften - Gestaltung der Arbeitswelt der Zukunft (Munich, Germany, Mar. 12-14, 2014) GfA-Press
Sylvie Nadeau. 2014 « Gestion des risques, sécurité du public, enjeux de conceptions et d’exploitations, les normes et règlements, SST sur les chantiers, les inspections, les nouvelles tendances ». Communication lors de la conférence : Les matins de l’Ordre:, Déjeuner # 1 – La santé et sécurité au travail, OIQ (Montréal, QC, Canada, 30 oct. 2014)
Sylvie Nadeau. 2014 « La gestion intégrée des risques de santé et de securité du travail: une mode ou une solution? ». Travail et Santé vol. 30 , nº 5. p. 4
Phuong Nguyen-Tri, Rachid El Aidani, Étienne Leborgne, Tan Pham, Toan Vu-Khanh. 2014 « Chemical ageingaging of a polyester nonwoven membrane used in aerosol and drainage filter ». Polymer Degradation and Stability vol. 101 , nº 1. p. 71-80
S. A. Niknam, Victor Songmene. 2014 « Analysis of friction and burr formation in slot milling ». 47th CIRP Conference on Manufacturing Systems, CMS 2014 (Windsor, Canada, Apr. 28-30, 2014) Elsevier
S. A. Niknam, Victor Songmene. 2014 « Analytical modelling of slot milling exit burr size ». International Journal of Advanced Manufacturing Technology vol. 73 , nº 1-4. p. 421-432
Seyed A. Niknam, Walery Wygowski, Marek Balazinksi, Victor Songmene. 2014 « Milling burr formation and avoidance ». In Machinability of Advanced Materials. p. 57-93. John Wiley & Sons, Inc.
Seyed Ali Niknam, Raid Khettabi, Victor Songmene. 2014 « Machinability and machining of titanium alloys: a review ». In Machining of Titanium Alloys. p. 1-30. Springer-Verlag Berlin Heidelberg
Seyed Ali Niknam, Yasser Zedan, Victor Songmene. 2014 « Machining burrs formation & deburring of aluminium alloys ». In Light metal alloys applications. p. 99-122. InTech publication
J. Plonka, E. Fobasso, M. Tchoupou, A. Zeouaoui, T. Oussou, Sylvie Nadeau, François Morency. 2014 « Safe aircraft de-icing zone ». 2014 Institute of Industrial Engineers Annual Conference and Expo (Montreal, QC, Canada, May 31-June 3, 2014) Institute of Industrial Engineers
Erik Poirier, Gulnaz Aksenova, Pierre Collot, Louis Rivest, Daniel Forgues, Sylvie Doré. 2014 « Transitioning to building information modeling and product lifecycle management in the Quebec construction industry: challenges, possible solutions and proposed action items ». Montréal : École de technologie supérieure.
Louis Rivest. 2014 « Editorial ». International Journal of Product Lifecycle Management vol. 7 , nº 1. p. 1-2
N. Roque, Sylvie Nadeau, A. Badri. 2014 « Preliminary ergonomics of a bolting machine and a drill used in underground mining ». Kongress der Gesellschaft für Arbeitswissenschaften - Gestaltung der Arbeitswelt der Zukunft (Munich, Germany, Mar. 12-14, 2014) GfA-Press
A. Rosenbaum, A. Chamanfar, Mohammad Jahazi, A. Bonakdar. 2014 « Microstructure analysis of broached inconel-718 gas turbine disc fir-trees ». Proceedings of the ASME Turbo Expo (Dusseldorf, Germany, June 16-20, 2014) American Society of Mechanical Engineers (ASME)
Mohamed Nejib Saidi, Victor Songmene, Jules Kouam. 2014 « Design, fabrication and testing of a polishing tool adaptable to machine-tools ». Affiche présentée lors de la conférence : Journée des étudiants du REGAL (JER2014) (Sherbrooke, QC, Canada, Nov. 18, 2014)
A. Sakkouhi, Sylvie Nadeau. 2014 « Connaissance et maîtrise de l’impact des activités d’amélioration continue sur la santé et la sécurité du travail ». Congrès AQHSST-RRSSTQ (Mont Sainte-Anne, QC, Canada, 7-9 mai 2014)
Emad Salari, Mohammad Jahazi, Alireza Khodabandeh, Hadi Ghasemi-Nanesa. 2014 « Influence of tool geometry and rotational speed on mechanical properties and defect formation in friction stir lap welded 5456 aluminum alloy sheets ». Materials and Design vol. 58. p. 381-389
Mohamed Slamani, Sébastien Gauthier, Jean-François Chatelain. 2014 « Analysis of trajectory deviation during high speed robotic trimming of carbon-fiber reinforced polymers ». Robotics and Computer-Integrated Manufacturing vol. 30 , nº 5. p. 546-555
Victor Songmene, Riad Khettabi, Martin Viens, Jules Kouam, Stéphane Hallé, François Morency, Jacques Masounave, Abdelhakim Djebara. 2014 « Mesure, contrôle et caractérisation des nanoparticules : Procédure appliquée à l'usinage et au frottement mécanique ». Montréal, Québec, Canada : IRSST. 93 p.
Victor Songmene. 2014 « Outillage - optimisation d'usinage ». Communication lors de la conférence : 1re édition de l'évènement Alliance Monde Polymères (Lévis, QC, Canada, 11-12 février 2014)
Yaniel Torres, François Morency, Sylvie Nadeau. 2014 « Dégivrage d'avions : réduire la fatigue ». Travail et Santé vol. 30 , nº 1. p. 23
Y. Torres Medina, Sylvie Nadeau, François Morency. 2014 « Fatigue and workload within aircraft ground deicing operations: theoretical framework ». 2014 Institute of Industrial Engineers Annual Conference and Expo (Montreal, QC, Canada, May 31-June 3, 2014) Institute of Industrial Engineers
Y. Torres Medina, Sylvie Nadeau, François Morency. 2014 « Étude de la fatigue et de la charge de travail chez une population de préposés au dégivrage des avions au Canada ». Congrès AQHSST-RRSSTQ (Mont Sainte-Anne, QC, Canada, 7-9 mai 2014)
H. Touazine, Mohammad Jahazi, Philippe Bocher. 2014 « Influence of hard turning on microstructure evolution in the subsurface layers of Inconel 718 ». ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014) American Society of Mechanical Engineers (ASME)
Bryan Trudel, Kazimierz Zaras, Sylvie Nadeau. 2014 « L’approche DRSA dans l’identification des facteurs clés en gestion des équipements miniers innovants ». 80th International meeting of the European Working Group in Multicriteria Decision Aiding (EWG-MCDA) (Québec, QC, Canada, 9-10 oct. 2014) Université Laval

Melissa Anderson, Javad Gholipour, Florent Bridier, Philippe Bocher, Mohammad Jahazi, Jean Savoie, Priti Wanjara. 2013 « Improving the formability of stainless steel 321 through multistep deformation for hydroforming applications ». Transactions of the Canadian Society for Mechanical Engineering vol. 37 , nº 1. p. 39-52
Mahyar Asadi, Dominic Guillot, Arnaud Weck, Ashok K. Koul, Ahmad Chamanfar, Mohammad Jahazi. 2013 « Constructing a validated deformation mechanism map using low temperature creep strain accommodation processes for waspaloy (A nickel-based superalloy) ». American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Paris, France, July 14-18, 2013) American Society of Mechanical Engineers
A. Ayache, François Morency, Sylvie Nadeau. 2013 « Fatigue assessment of workers responsible for deicing aircrafts on the ground and its effects on their performance ». CASI 60th Aeronautics Conference and AGM, Aèro 13 (Toronto, ON, Canada, Apr. 30-May 2, 2013) Canadian Aeronautics and Space Institute
A. Badri, S. Nadeau, A. Gbodossou. 2013 « A new practical approach to risk management for underground mining project in Quebec ». Journal of Loss Prevention in the Process Industries vol. 26 , nº 6. p. 1145-1158
M. Bensalah, A. Chamanfar, S. Chentouf, M. Jahazi. 2013 « The influence of thermomechanical processing on prior austenite grain size in medium carbon low alloy steels ». Materials Science & Technology Conference and Exhibition 2013 (MS&T'13) (Montreal, QC, Canada, Oct. 27-31, 2013) Curran
B. Boudreau-Trudel, Sylvie Nadeau, K. Zaras, I. Deschamps. 2013 « La gestion performante de l’innovation minière : résultats d’une recherche menée auprès de dix projets innovants ». Communication lors de la conférence : Conférences mensuelles en sécurité du travail et contrôle des risques industriels, RRSSTQ, ÉREST, ÉTS (Montréal, QC, Canada, 12 déc. 2013)
B. Boudreau-Trudel, Sylvie Nadeau, K. Zaras, I. Deschamps. 2013 « Les facteurs clés pour la réussite d'une implantation d'innovation minière ». 35e congrès de l'AQHSST (Bromont, QC, Canada, 1-3 mai 2013)
N. Boutana, P. Bocher, M. Jahazi. 2013 « Discrepancy between fatigue and dwell-fatigue behavior of near alpha titanium alloys simulated by cellular automata ». International Journal of Fatigue vol. 51. p. 49-56
Antoine Brière-Côté, Louis Rivest, Roland Maranzana. 2013 « 3D CAD model comparison: An evaluation of model difference identification technologies ». Computer-Aided Design and Applications vol. 10 , nº 2. p. 173-195
Quang Hien Bui, Xuan Tan Pham, Mario Fafard. 2013 « Modelling of microstructure effects on the mechanical behavior of aluminium tubes drawn with different reduction areas ». International Journal of Plasticity vol. 50. p. 127-145
A. Chamanfar, L. Sarrat, M. Jahazi, M. Asadi, A. Weck, A. K. Koul. 2013 « Microstructural characteristics of forged and heat treated Inconel-718 disks ». Materials and Design vol. 52. p. 791-800
Ahmad Chamanfar, Mohammad Jahazi, Javad Gholipour, Priti Wanjara, Stephen Yue. 2013 « Modeling grain size and strain rate in linear friction welded Waspaloy ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 44 , nº 9. p. 4230-4238
S. Demers, Sylvie Nadeau, Hakim Bouzid. 2013 « On the use of multishell theory to model herniated discs ». Dokumentation des 59. Arbeitswissenschaftlichen Kongresses Krefeld 27.02.-01.03.2013 (Krefeld, Germany, Feb. 27-Mar. 1, 2013) GfA-Press
Sébastien Demers, Abdel-Hakim Bouzid, Sylvie Nadeau. 2013 « Développement d'un modèle analytique pour l'étude des contraintes d'un disque intervertebral soumis à une compression axiale ». CIRI 2013, 3ème Congrès international sur l'ingénierie des risques industriels (Reims, France, 3-5 juil. 2013) Université de Reims Champagne-Ardenne
Sébastien Demers, Abdel-Hakim Bouzid, Sylvie Nadeau. 2013 « On the modeling of an intervertebral disc using a novel large deformation multi-shell approach ». Journal of Biomechanical Engineering vol. 135 , nº 5
Sébastien Demers, Sylvie Nadeau, Hakim Bouzid. 2013 « Analytical anisotropic multi-shell model of a simplified intervertebral disc subjected to axial compression ». ASME 2013 Summer Bioengineering Conference (SBC) (Sunriver, OR, USA, June 26-29, 2013) American Society of Mechanical Engineers
A. Djebara, A. Bahloul, V. Songmene. 2013 « Émission et dispersion de particules lors de l'usinage à sec d'alliages d'aluminium ». Proceedings of the 12th International Aluminum Conference (INALCO) (Montréal, QC, Canada, Oct. 21-23, 2013)
A. Djebara, W. Jomaa, A. Bahloul, V. Songmene. 2013 « Dust emission during dry machining of aeronautic aluminum alloys ». Proceedings of 1st International Conference on Aeronautics Sciences (ICAS) (Oran, Algeria, May 27-28, 2013) ICAS
A. Djebara, Victor Songmene. 2013 « Dry machining of aluminum alloys and air quality ». Proceedings of the 37th International MATADOR Conference (Manchester, UK, July 25-27, 2012) Springer Science and Business Media, LLC
A. Djebara, Y. Zedan, Jules Kouam, Victor Songmene. 2013 « The effect of the heat treatment on the dust emission during machining of an Al-7Si-Mg cast alloys ». Journal of Materials Engineering and Performance vol. 22 , nº 12. p. 3840-3853
Abdelhakim Djebara, Victor Songmene, Ali Bahloul. 2013 « Effects of machining conditions on specific surface of PM2.5 emitted during metal cutting ». Health vol. 5 , nº 10A2. p. 36-43
Behnam Emami-Mehrgani, Jean-Pierre Kenné, Sylvie Nadeau. 2013 « Lockout/tagout and optimal production control policies in failure-prone non-homogenous transfer lines with passive redundancy ». International Journal of Production Research vol. 51 , nº 4. p. 1006-1023
J. Fatisson, Sylvie Nadeau, Stéphane Hallé, C. Viau, M. Camus, Y. Cloutier. 2013 « A pilot study towards ranking of occupational risk factors emanating from engineered nanoparticle: review of a decade of literature ». International Journal of Safety and Security Engineering vol. 3 , nº 4. p. 241-264
Julien Fatisson, Stéphane Hallé, Sylvie Nadeau, Claude Viau, Michel Camus, Barthélemy Ateme-Nguema, Yves Cloutier. 2013 « Nanoparticules synthétiques : Gestion adaptative des risques à la santé et à la sécurité des travailleurs ». Montréal, (Québec) : IRSST.
Mathieu Gendron, Eric Boudreault, Bruce Hazel, Henri Champliaud, Tan Pham. 2013 « Temperature profile optimization in a new robotic local induction heat treatment process ». Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 (Montreal, QC, Canada, Oct. 27-31, 2013) Association for Iron and Steel Technology
S. B. Ghafarizadeh, J. F. Chatelain, G. Lebrun. 2013 « Multi axis machining of high performance CFRP for aerospace industry ». 19th International Conference on Composite Materials (ICCM 2013) (Montreal, QC, Canada, July 28 - Aug. 02, 2013) International Committee on Composite Materials
Hossein Hamedanianpour, Jean-François Chatelain. 2013 « Effect of tool wear on quality of carbon fiber reinforced polymer laminate during edge trimming ». Manufacturing Engineering and Process II (Vancouver, B.C., Canada, Apr. 13-14, 2013) Trans Tech Publications Ltd
F. Jalilian, M. Jahazi, R. A. L. Drew. 2013 « Microstructure evolution during transient liquid phase bonding of alloy 617 ». Metallography, Microstructure, and Analysis vol. 2 , nº 3. p. 170-182
W. Jomaa, Victor Songmene, Philippe Bocher. 2013 « On residual stress changes after orthogonal machining of induction hardened AISI 4340 steel ». Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 (Montreal, QC, Canada, Oct. 27-31, 2013) Association for Iron and Steel Technology
R. Kamguem, A. Djebara, Victor Songmene. 2013 « Investigation on surface finish and metallic particle emission during machining of aluminum alloys using response surface methodology and desirability functions ». International Journal of Advanced Manufacturing Technology vol. 69 , nº 5-8. p. 1283-1298
Rene Kamguem, Souheil Antoine Tahan, Victor Songmene. 2013 « Evaluation of machined part surface roughness using image texture gradient factor ». International Journal of Precision Engineering and Manufacturing vol. 14 , nº 2. p. 183-190
R. Khettabi, L. Fatmi, Jacques Masounave, Victor Songmene. 2013 « On the micro and nanoparticle emission during machining of titanium and aluminum alloys ». CIRP Journal of Manufacturing Science and Technology vol. 6 , nº 3. p. 175-180
Jules Kouam, Victor Songmene, Ali Bahloul. 2013 « Experimental investigation on PM2.5 particle emission during polishing of granite ». Health vol. 5 , nº 10A2. p. 29-35
Jules Kouam, Victor Songmene, Yasser Zedan, AbdelHakim Djebara, Riad Khettabi. 2013 « On chip formation during drilling of cast aluminum alloys ». Machining Science and Technology vol. 17 , nº 2. p. 228-245
Annie Francie Kouedeu, Jean-Pierre Kenné, Pierre Dejax, Victor Songmene, Vladimir Polotski. 2013 « Analytical modelling and control of a hybrid manufacturing/remanufacturing system ».
K. Kouwonou, X. T. Pham, G. Lebrun. 2013 « Modeling and characterization of thermoplastic composites peek/carbon ». Proceedings of the 19th International Conference on Composite Materials-ICCM19 (Montreal, QC, Canada, July 28-Aug. 2, 2013)
Hugues Lessard, Gilbert Lebrun, Xuan-Tan Pham. 2013 « Experimental evaluation of the thermo-stamping process for a 3d composite part made of unidirectional cf/peek prepregs ». 45th ISTC (Wichita, KS, USA, Oct. 21-24, 2013) SAMPE
Annie Levasseur, Jérémie Ménard, Victor Songmene, Julio Fernandes, Yvan Petit. 2013 « Quality of reamed surface using serrated blades as compared to a convential acetabular reamer ». ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (San Diego, CA, USA, Nov. 15-21, 2013) American Society of Mechanical Engineers (ASME)
A. R. Maldar, G. R. Ebrahimi, Meysam Haghshenas, M. Jahazi, P. Bocher. 2013 « Thermomechanical characterization of Mg-9Al-1Zn alloy using power dissipation maps ». Journal of Materials Engineering and Performance vol. 22 , nº 11. p. 3306-3314
S. Moreau, Sylvie Nadeau. 2013 « Integration of occupational health and safety into the development of mining vehicles ». Dokumentation des 59. Arbeitswissenschaftlichen Kongresses Krefeld 27.02.-01.03.2013 (Krefeld, Germany, Feb. 27-Mar. 1, 2013) GfA-Press
D. Moreira, Sylvie Nadeau, B. Ateme-Nguema. 2013 « Evolutionary algorithmes and swarm intelligence to solve problems applied to complex problems, big data and underground mining engineering ». 2013 JSM proceedings : papers presented at the Joint Statistical Meetings, Montréal, Québec, Canada, August 3-8, 2013, and other ASA-sponsored conferences. (Montreal, QC, Canada, Aug. 3-8, 2013) American Statistical Association
François Morency, Sylvie Nadeau. 2013 « Ergonomie physique et cognitive du dégivrage des avions au sol ». Communication lors de la conférence : Conférences mensuelles en sécurité du travail et contrôle des risques industriels, RRSSTQ, ÉREST, ÉTS (Montréal, QC, Canada, 14 nov. 2013)
M. Mounet, François Morency, Sylvie Nadeau. 2013 « Integration of human factors in deicing operations in prospect of occupational health and safety of aircraft deicing workers ». Dokumentation des 59. Arbeitswissenschaftlichen Kongresses Krefeld 27.02.-01.03.2013 (Krefeld, Germany, Feb. 27-Mar. 1, 2013) GfA-Press
Sylvie Nadeau, Michèle Bouchard, Maximilien Debia, Nathalie DeMarcellis-Warin, Stéphane Hallé, Victor Songmene, Marie-Christine Therrien, Kevin Wilkinson, Barthelemy Ateme-Nguema, Genevieve Dufour, André Dufresne, Julien Fatisson, Sami Haddad, Madjid Hadioui, Jules Kouam, François Morency, Robert Tardif, Martin Viens, Scott Weichenthal, Claude Viau, Michel Camus. 2013 « EquiNanos: innovative team for nanoparticle risk management ». Nanomedicine : Nanotechnology, Biology and Medicine vol. 9 , nº 1. p. 22-24
Sylvie Nadeau, B. Ateme-Nguema, C. Chene, J. Zimolo. 2013 « Integration of occupational health and safety into the design of flexible manufacturing systems: documented experience in the wood-processing sector ». Dokumentation des 59. Arbeitswissenschaftlichen Kongresses Krefeld 27.02.-01.03.2013 (Krefeld, Germany, Feb. 27-Mar. 1, 2013) GfA-Press
Sylvie Nadeau, A. Badri, B. Boudreau-Trudel, S. Lagnika, D. Moreira, M.C. Benabderrahmane. 2013 « Les mines : quand la SST vaut son pesant d’or ». Communication lors de la conférence : Conférences mensuelles en sécurité du travail et contrôle des risques industriels, RRSSTQ, ÉREST, ÉTS (Montréal, QC, Canada, 10 oct. 2013)
Sylvie Nadeau, Adel Badri, Richard Wells, Patrick Neumann, Glen Kenny, Douglas Morrison. 2013 « Sustainable canadian mining: Occupational health and safety challenges ». Proceedings of the Human Factors and Ergonomics Society Annual Meeting (HFES) (San Diego, CA, USA, Sept. 30 - Oct. 4, 2013) Human Factors an Ergonomics Society Inc.
Sylvie Nadeau, J. Fatisson, A. Badri, B. Emami-Mehrgani. 2013 « From serious shortage of researchers to OHS law changes and growing industrial needs: a dynamic and quiet force ». Relations Industrielles / Industrial Relations vol. 68 , nº 4. p. 608-622
Sylvie Nadeau, Stéphane Hallé, Jean Arteau, B. Ateme-Nguema, A. Badri, Christian Belleau, Hakim Bouzid, M. Debia, B. Emami-Mehrgani, Frédéric Laville, François Morency, Anh Dung Ngô, Yvan Petit, Jérémie Voix. 2013 « Quand la vulgarisation scientifique reprend ses lettres de noblesse: le cas de l'EREST ». Affiche présentée lors de la conférence : Journée Découverte, École de technologie supérieure (Montréal, QC, Canada, 13 mars 2013)
Sylvie Nadeau, François Morency. 2013 « L'université un partenaire d'excellence en prévention ». Travail et Santé vol. 29 , nº 3. p. 26-27
S. A. Niknam, V. Songmene. 2013 « Deburring and edge finishing of aluminum alloys : a review ». Proceedings of the 12th International Aluminum conference (INALCO) (Montréal, QC, Canada, Oct. 21-23, 2013)
S. A. Niknam, Victor Songmene. 2013 « Modeling of burr thickness in milling of ductile materials ». International Journal of Advanced Manufacturing Technology vol. 66 , nº 9-12. p. 2029-2039
S. A. Niknam, Victor Songmene, Y. H. J. Au. 2013 « The use of acoustic emission information to distinguish between dry and lubricated rolling element bearings in low-speed rotating machines ». International Journal of Advanced Manufacturing Technology vol. 69 , nº 9-12. p. 2679-2689
Seyed Ali Niknam, Victor Songmene. 2013 « Experimental investigation and modeling of milling burrs ». ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference (MSEC) (Madison, WI, USA, June 10-14, 2013) American Society of Mechanical Engineers
Seyed Ali Niknam, Victor Songmene. 2013 « Factors governing burr formation during high-speed slot milling of wrought aluminum alloys ». Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture vol. 227 , nº 8. p. 1165-1179
Seyed Ali Niknam, Victor Songmene. 2013 « Simultaneous optimization of burrs size and surface finish when milling 6061-T6 aluminium alloy ». International Journal of Precision Engineering and Manufacturing vol. 14 , nº 8. p. 1311-1320
Seyed Ali Niknam, Victor Songmene, Y. H. Joe Au. 2013 « Proposing a new acoustic emission parameter for bearing condition monitoring in rotating machines ». Transactions of the Canadian Society for Mechanical Engineering vol. 37 , nº 4. p. 1105-1114
Yvan Petit, Julio Fernandes, Jean-Sébastien Mérette, Mathieu Dansereau, Victor Songmene, Mathieu Carrier. 2013-06-04 « Acetabular reamer ». Brevet américain US 8,454,609.
Tan Pham, G. Pradinc, X. Cao, J. L. Fihey. 2013 « Modeling of moving heat sources using meshless element free galerkin method ». ASM Proceedings of the International Conference: Trends in Welding Research (Chicago, IL, USA, June 4-8, 2012) ASM International
Xuan-Tan Pham. 2013 « Analyse thermique de Rosenthal par la méthode meshless element free Galerkin ». Communication lors de la conférence : Séminaire "Modélisation avancée des cuves d'électrolyse et efficacité énergétique'' de la Chaire de recherche industrielle CRSNG/Alcoa sur la modélisation avancée des cuves d'électrolyse et l'efficacité énergétique, Université Laval (Québec, QC, Canada, 16 mai 2013)
Xuan-Tan Pham. 2013 « Simulation numérique du soudage par éléments finis avec Sysweld ». Communication lors de la conférence : Symposoud 2013. Ensembles soudés: de la conception à la fabrication (Varennes, QC, Canada, 30-31 mai 2013)
Xuan-Tan Pham. 2013 « Two-dimensional rosenthal moving heat source analysis using the meshless element free Galerkin method ». Numerical Heat Transfer; Part A: Applications vol. 63 , nº 11. p. 807-823
G. Pradinc, X-T. Pham, X. Cao, J-L. Fihey, L. Mathieu. 2013 « An experimentally assisted numerical simulation of metal forming for thick and heavy plates by line heating ». Communication lors de la conférence : Materials Science & Technology Conference and Exhibition 2013 (MS&T'13) (Montreal, QC, Canada, Oct. 27-31, 2013)
V. Sabri, S.-Antoine Tahan, X. T. Pham, H. Radvar-Esfahlan, B. Louhichi, A. M. Tahvilian. 2013 « Fixtureless profile inspection of non-rigid parts ». Proceedings of International Conference on Computers and Industrial Engineering, CIE (Hong Kong, China, Oct. 16-18, 2013) Curran Associates Inc.
A. Sakkouhi, Sylvie Nadeau. 2013 « Knowing and mastering the impact of lean manufacturing on OHS ». Dokumentation des 59. Arbeitswissenschaftlichen Kongresses Krefeld 27.02.-01.03.2013 (Krefeld, Germany, 27 Feb.-Mar. 1, 2013) GfA-Press
Stephane Segonds, Jacques Masounave, Victor Songmene, Christian Bes. 2013 « A simple analytical model for burr type prediction in drilling of ductile materials ». Journal of Materials Processing Technology vol. 213 , nº 6. p. 971-977
D. Shahriari, A. Zolfaghari, Mohammad Jahazi, Philippe Bocher. 2013 « Development of an expert system to characterize weld defects identified by ultrasonic testing ». American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Paris, France, July 14-18, 2013) American Society of Mechanical Engineers
Victor Songmene, R. D. Njoya, B. T. Nkengue. 2013 « Machining performance of a graphitic SiC-aluminium matrix composite ». Proceedings of the 37th International MATADOR Conference (Manchester, UK, July 25-27, 2012) Springer Science and Business Media, LLC
Y. Torres, François Morency, Sylvie Nadeau. 2013 « Factors influencing of on ground deicing operation: ergonomics and occupational safety perspectives ». American Industrial Hygiene Conference & Exposition AIHce 2013 (Montreal, QC, Canada, May 18-23, 2013) American Industrial Hygiene Association
B. Trudel, Sylvie Nadeau, K. Zaras, I. Deschamps. 2013 « L'innovation dans le domaine minier: impacts et gestion ». Travail et Santé vol. 29 , nº 2. p. 22
Baoguang Xu, W. F. Xie, Martin Viens, Ehsan Mohseni, Lionel Birglen, Iraj Mantegh. 2013 « Intelligent eddy current crack detection system design based on neuro-fuzzy logic ». Proceedings of the The NDT in Canada 2013 Conference in conjunction with the International Workshop on Smart Materials & Structures, SHM and NDT for the Energy Industry (Calgary, AB, Canada, Oct. 7-10, 2013)
Imed Zaghbani, Victor Songmene, Ilian Bonev. 2013 « An experimental study on the vibration response of a robotic machining system ». Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture vol. 227 , nº 6. p. 866-880
Y. Zedan, Victor Songmene, R. Khettabi, J. Kouam, Jacques Masounave. 2013 « Surface integrity of Al6061-T6 drilled in wet, semi-wet and dry conditions ». Proceedings of the 37th International MATADOR Conference (Manchester, UK, July 25-27, 2012) Springer Science and Business Media, LLC
Yasser Zedan, Victor Songmene, Jules Kouam, Jacques Masounave. 2013 « Effects of lubrication modes on part quality during drilling 6061-T6 aluminium alloy ». International Journal of Machining and Machinability of Materials vol. 13 , nº 2-3. p. 231-252
J. Zheng, W. F. Xie, Martin Viens, L. Birglen, I. Mantegh. 2013 « Design of advanced automatic inspection system for turbine blade FPI analysis ». Review of Progress in Quantitative Nondestructive Evaluation (Denver, CO, USA, July 15-20, 2012) American Institute of Physics

Melissa Anderson, Philippe Bocher, Javad Gholipour, Mohammad Jahazi, Jean Savoie, Priti Wanjara. 2012 « Increasing the hydroformability of stainless steel 321 by multistep processing ». Proceedings of the 14th International Conference on Metal Forming, METAL FORMING 2012 (Krakow, Poland, Sept. 16-19, 2012) Wiley-VCH Verlag
A. Badri, S. Nadeau, A. Gbodossou. 2012 « A mining project is a field of risks: A systematic and preliminary portrait of mining risks ». International Journal of Safety and Security Engineering vol. 2 , nº 2. p. 145-166
A. Badri, Sylvie Nadeau, A. Gbodossou. 2012 « Overcoming the OHS risks of a mining project : case of an new open-pit mine in Quebec ». Gesellschaft für Arbeitswissenschaft (Kassel, Allemagne, Feb. 22-24, 2012)
A. Badri, Sylvie Nadeau, A. Gbodossou. 2012 « Une nouvelle approche multidisciplinaire pour intégrer la SST dans la gestion des risques d'un projet minier ». 34e congrès de l’AQHSST (Gatineau, QC, Canada, 16-18 mai 2012) Association québécoise pour l’hygiène, la santé et la sécurité du travail
Adel Badri, André Gbodossou, Sylvie Nadeau. 2012 « Occupational health and safety risks: Towards the integration into project management ». Safety Science vol. 50 , nº 2. p. 190-198
Adel Badri, Sylvie Nadeau, André Gbodossou. 2012 « Proposal of a risk-factor-based analytical approach for integrating occupational health and safety into project risk evaluation ». Accident Analysis and Prevention vol. 48. p. 223-234
M. Balazinski, V. Songmene, H. A. Kishawy. 2012 « Analyzing the machinability of metal matrix composites ». In Machining Technology for Composite Materials. p. 394-411. Woodhead Publishing
B. Boudreau-Trudel, Sylvie Nadeau, K. Zaras, Isabelle Deschamps. 2012 « The impact of new technology in mining equipment on productivity and OHS performance ». NES 2012, 44th Annual International Nordic Ergonomics and Human Factors Society Conference (Stockholm, Sweden, Aug. 19-22, 2012)
B. Boudreau-Trudel, Sylvie Nadeau, K. Zaras, Isabelle Deschamps. 2012 « The importance of identifying factors determining successful implementation of innovation in mining: a review of the literature on the impact of technological innovation on productivity and OHS performance ». Gesellschaft für Arbeitswissenschaft (Kassel, Allemagne, Feb. 22-24, 2012)
Matthieu Bricogne, Louis Rivest, Nadege Troussier, Benoit Eynard. 2012 « Towards PLM for mechatronics system design using concurrent software versioning principles ». Product Lifecycle Management: Towards Knowledge-Rich Enterprises - IFIP WG 5.1 International Conference, PLM 2012, Revised Selected Papers (Montreal, QC, Canada, July 9-11, 2012) Springer New York
Antoine Brière-Côté, Louis Rivest, Roland Maranzana. 2012 « Comparing 3D CAD models: Uses, methods, tools and perspectives ». Computer-Aided Design and Applications vol. 9 , nº 6. p. 771-794
Antoine Brière-Côté, Louis Rivest, Roland Maranzana. 2012 « Integration of explicit geometric constraints in the comparison of 3D CAD models for part design reuse ». Product Lifecycle Management: Towards Knowledge-Rich Enterprises - IFIP WG 5.1 International Conference, PLM 2012, Revised Selected Papers (Montreal, QC, Canada, July 9-11, 2012) Springer New York
A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, S. Yue. 2012 « Maximizing the integrity of linear friction welded Waspaloy ». Materials Science and Engineering: A vol. 555. p. 117-130
A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, S. Yue. 2012 « Suppressed liquation and microcracking in linear friction welded WASPALOY ». Materials and Design vol. 36. p. 113-122
Jean-François Chatelain. 2012 « A university-industry research collaboration for the optimization of the machining process of multilayer materials for the aerospace industry ». Journal of Management and Engineering Integration vol. 5 , nº 1. p. 23-33
Jean-François Chatelain, Jean-François Lalonde, Antoine S. Tahan. 2012 « Effect of Residual Stresses Embedded within Workpieces on the Distortion of Parts after Machining ». International Journal of Mechanics vol. 6 , nº 1. p. 43-51
Jean-François Chatelain, Imed Zaghbani. 2012 « A Comparison of Special Helical Cutter Geometries Based on Cutting Forces for the Trimming of CFRP Laminates ». International Journal of Mechanics vol. 6 , nº 1. p. 52-59
Jean-François Chatelain, Imed Zaghbani, Joseph Monier. 2012 « Effect of Ply Orientation on Roughness for the Trimming Process of CFRP Laminates ». International Journal of Industrial and Manufacturing Engineering vol. 6 , nº 8. p. 1516-1522
S. Demers, Hakim Bouzid, Sylvie Nadeau. 2012 « Stress analysis of the intervertebral disc using a developed multi-shell model ». Twelfth Pan American Congress of Applied Mechanics (PACAM XII) (Trinidad, Spain, Jan. 2-6, 2012)
Sébastien Demers, Abdel-Hakim Bouzid, Sylvie Nadeau. 2012 « Analytical and finite element multi-shell modelling of an intervertebral disc ». ASME 2012 Pressure Vessels and Piping Conference, PVP 2012 (Toronto, ON, Canada, July 15-19, 2012) American Society of Mechanical Engineers
A. Djebara, V. Songmene, J. Kouam, R. Khettabi. 2012 « An experimental investigation on dust emission during milling process using statistical analysis ». International Journal of Advances in Machining and Forming Operations vol. 4 , nº 1. p. 15-37
M. A. El Hani, Louis Rivest, Roland Maranzana. 2012 « Product data reuse in product development: A practitioner's perspective ». Product Lifecycle Management: Towards Knowledge-Rich Enterprises - IFIP WG 5.1 International Conference, PLM 2012, Revised Selected Papers (Montreal, QC, Canada, July 9-11, 2012) Springer New York
B. Emami-Mehrgani, Jean-Pierre Kenné, Sylvie Nadeau. 2012 « Lockout/tagout and human error in production control of manufacturing systems with passive redundancy ». Gesellschaft für Arbeitswissenschaft (Kassel, Allemagne, Feb. 22-24, 2012)
B. Emami-Mehrgani, Sylvie Nadeau, Jean-Pierre Kenné. 2012 « Réduction des coûts de production des systèmes manufacturiers sujets aux activités de cadenassage/décadenassage ». 34e congrès de l’AQHSST (Gatineau, QC, Canada, 16-18 mai 2012) Association québécoise pour l’hygiène, la santé et la sécurité du travail
J. Fatisson, Sylvie Nadeau, Stéphane Hallé, C. Viau, M. Camus, B. Ateme-Nguema. 2012 « Développement d'un outil d'appréciation ou d'évaluation adaptative des risques à la santé humaine posés par les nanoparticules synthétiques ». Communication lors de la conférence : Journée d'activité de transfert de connaissances du Réseau Ne3LS (Montréal, QC, Canada, 5 juin 2012)
J. Fatisson, Sylvie Nadeau, Stéphane Hallé, C. Viau, M. Camus, B. Ateme-Nguema. 2012 « Développement d’un outil d’appréciation ou d’évaluation adaptative des risques à la santé humaine posés par les nanoparticules synthétiques ». Communication lors de la conférence : Demi-journée thématique RTM1 & RTM2, IRSPUM (Montréal, QC, Canada, 8 juin 2012)
Julien Fatisson, Stéphane Hallé, Sylvie Nadeau. 2012 « Towards an integrated and adaptive risk assessment tool for engineered nanoparticles ». 3rd International Conference on Nanotechnology: Fundamentals and Applications (Montréal, QC, Canada, Aug. 7-9, 2012)
Julien Fatisson, Stéphane Hallé, Sylvie Nadeau. 2012 « Vers une gestion adaptative des risques de l’invisible… ». Affiche présentée lors de la conférence : Conférence NanoQuébec 2012 (Montréal, QC, Canada, 20-21 mars 2012)
Julien Fatisson, Stéphane Hallé, Sylvie Nadeau, Barthélemy Ateme-Nguema, Claude Viau, Michel Camus, Yves Cloutier. 2012 « Towards an integrated and adaptive risk assessment tool for engineered nanoparticles ». International Journal of Theoretical and Applied Nanotechnology vol. 1 , nº 1. p. 117-123
W. Jomaa, N. Ben Fredj, Victor Songemene, I. Zaghbani, C. Braham. 2012 « Hybrid machining versus hard turning-investigation on process induced residual stresses ». 1st International Conference on Virtual Machining Process Technology (VMPT) (Montréal, Québec, May 28-June 01, 2012)
René Kamguem, Victor Songmene, Jean-Pierre Kenné, Souheil Antoine Tahan. 2012 « Vision-based surface roughness inspection of machined aluminium parts ». International Journal of Machining and Machinability of Materials vol. 12 , nº 3. p. 215-235
René Kamguem, Antoine Tahan, Bernard Wenga, Victor Songmene. 2012 « Non-contact Optical inspection of machined parts Surface Roughness ». 1st International Conference on Virtual Machining Process Technology (VMPT) (Montréal, Québec, Canada, 28 mai au 1er juin 2012)
J. Kouam, V. Songmene, M. Balazinski, P. Hendrick. 2012 « Dry, semi-dry and wet machining of 6061-T6 aluminium alloy ». In Aluminium Alloys - New Trends in Fabrication and Applications. p. 199-222. InTech
J. Kouam, V. Songmene, A. Djebara, R. Khettabi. 2012 « Effect of friction testing of metals on particle emission ». Journal of Materials Engineering and Performance vol. 21 , nº 6. p. 965-972
Jules Kouam, Imed Zaghbani, Victor Songmene, Nick Parson, Alexandre Maltais. 2012 « Factors affecting the machinability of Al-Mg-Si extrusions ». Proceedings of the 10th International Aluminum Extrusion Technology Conference (ET '12) (Miami, FL, USA, May 15-18, 2012) Extrusion Technology for Aluminum Profiles Foundation
Annie Francie Kouedeu, Jean-Pierre Kenné, Pierre Dejax, Victor Songmene. 2012 « A stochastic model for controlling the deterioration of a two machines production system: Extensions to remanufacturing ». 25th European Conference on Operational Research (EURO 2012) (Vilnius, Lituanie, July 08-11, 2012)
Annie Francie Kouedeu, Jean-Pierre Kenné, Pierre Dejax, Victor Songmene. 2012 « The study of a deteriorating manufacturing system using simulation and response methodology ». 24th European Modeling and Simulation Symposium, EMSS 2012 (Vienna, Austria, Sept. 19-21, 2012) DIPTEM
Annie Francie Kouedeu, Jean-Pierre Kenné, Pierre Delax, Victor Songmene. 2012 « Production planning of a two-machine manufacturing system with production dependent failure rates ». International Conference on Information Systems, Logistics and Supply Chain (ILS) (Québec, QC, Canada, Aug. 26-29, 2012)
S. B. Lagnika, Sylvie Nadeau, B. Ateme-Nguema. 2012 « Analyse de l’intégration des systèmes de gestion des risques SST/qualité/environnement dans les mines souterraines ». Communication lors de la conférence : Conférences mensuelles en sécurité du travail et contrôle des risques industriels, RRSSTQ, ÉREST, ÉTS (Montréal, QC, Canada, 12 janvier 2012)
S. B. Lagnika, Sylvie Nadeau, B. Ateme-Nguema. 2012 « Intégration des risques opérationnels aux risques de SST dans les mines: une révolution de la culture de sécurité? ». 80e du Congrès de l'Acfas (Montréal, QC, Canada, 7-11 mai 2012)
S. B. Lagnika, Sylvie Nadeau, B. Ateme-Nguema. 2012 « Intégration des systèmes de gestion des risques liés à la SST dans les mines souterraines ». Travail et Santé vol. 28 , nº 4. p. 20
S. Lagnika, Sylvie Nadeau, B. Ateme-Nguema. 2012 « Développement d’un modèle préliminaire de gestion intégrée : Cas des mines ». Communication lors de la conférence : Incorporation des risques opérationnels aux risques de Santé Sécurité du Travail (SST). École Polytechnique d'Abomey-Calavi (ÉPAC) (Abomey-Calavi, Bénin, 19 juin 2012)
B. Louhichi, M. Bruneau, Louis Rivest. 2012 « Transposition des associations et propagation des changements dans une maquette numérique ». Communication lors de la conférence : Deuxième Congrès Tunisien de Mécanique (COTUME) (Sousse, Tunisie, 19-21 mars 2012)
Borhen Louhichi, Louis Rivest. 2012 « Management of associations within digital mock-ups for improved collaboration ». Product Lifecycle Management: Towards Knowledge-Rich Enterprises - IFIP WG 5.1 International Conference, PLM 2012, Revised Selected Papers (Montreal, QC, Canada, July 9-11, 2012) Springer New York
C. T. Manolache, Sylvie Nadeau, Jean Arteau. 2012 « Conditions de travail comme un facteur déterminant de la SST: le métier de poseurs d'armatures ». Affiche présentée lors de la conférence : Colloque de la Direction de la Santé Publique de Montréal (Montréal, QC, Canada, 29 mars 2012)
Constantin T. Manolache, Jean Arteau, Sylvie Nadeau, Jurij Wakula. 2012 « Lean construction and occupational health and safety risks in construction project management : the case of ironworkers: a short literature review ». Frühjahrskongress 2012 der Gesellschaft für Arbeitswissenschaft GfA (Kassel, Allemagne, Feb. 22-24, 2012) GfA-Press
P. Masson, N. Quaegebeur, P. Micheau, A. Maslouhi, M. Viens, L. Lessard, P. Hubert, S. Kruger. 2012 « Characterization of guided wave propagation in aircraft structures ». Recherche et Innovation pour les Transports du Futur (RITF 2012) (Paris, France, Nov.12-16, 2012)
D. Moreira, Sylvie Nadeau, B. Ateme-Nguema. 2012 « Prioritization of prevention activities in confined places by meta-heuristic methods : the case of respiratory problems in underground gold mines in Abitibi-Témiscamingue (Canada) ». International Ergonomics Association World Congress (Recife, Brazil, Feb. 12-16, 2012)
Sylvie Nadeau. 2012 « Les mines : Quand la SST vaut son pesant d'or ». Communication lors de la conférence : Conférences du doyen de l'École de technologie supérieure (Montréal, QC, Canada, 5 déc. 2012)
Sylvie Nadeau, Stéphane Hallé, Claude Viau, Yves Cloutier. 2012 « Call for the development of an adaptative tool for assessing human health posed by engineered nanoparticle risk ». International Journal of Safety and Security Engineering vol. 2 , nº 1. p. 40-53
Nabil Nahas, B. Ateme-Nguema, Julien Fatisson, Sylvie Nadeau, Stéphane Hallé, C. Viau. 2012 « Integrated and adaptive risk prioritization pilot test for engineered nanoparticles ». Conférence Internationale Ne3LS (Montréal, QC, Canada, Nov. 1-2, 2012)
Seyed Ali Niknam, Rene Kamguem, Victor Songmene. 2012 « Analysis and optimization of exit burr size and surface roughness in milling using desirability function ». ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012 (Houston, TX, USA, Nov. 9-15, 2012) American Society of Mechanical Engineers
Seyed Ali Niknam, Victor Songmene. 2012 « Statistical investigation on burrs thickness during milling of 6061-T6 aluminium alloy ». 1st International Conference on Virtual Machining Process Technology (Montréal, QC, Canada, 28 May-01 June, 2012)
Seyed Ali Niknam, Yasser Zedan, Victor Songmene. 2012 « Burr formation during milling of wrought aluminum alloys ». 20th Annual Conference of Mechanical Engineering (ISME) (Shiraz, Iran, May 15-17, 2012)
V. Quintana, L. Rivest, R. Pellerin, F. Kheddouci. 2012 « Re-engineering the engineering change management process for a drawing-less environment ». Computers in Industry vol. 63 , nº 1. p. 79-90
Virgilio Quintana, Louis Rivest, Robert Pellerin. 2012 « Measuring and improving the process of engineering change orders in a model–based definition context ». International Journal of Product Lifecycle Management vol. 6 , nº 2. p. 138-160
Louis Rivest, Abdelaziz Bouras, Borhen Louhichi. 2012 « Product Lifecycle Management. Towards Knowledge-Rich Enterprises IFIP WG 5.1 International Conference, PLM 2012, Montreal, QC, Canada, July 9-11, 2012, Revised Selected Papers ». Berlin, Heidelberg : Springer Berlin Heidelberg. 658 p.
Louis Rivest, Abdelaziz Bouras, Borhen Louhichi. 2012 « IFIP Advances in Information and Communication Technology: Preface ». Product Lifecycle Management: Towards Knowledge-Rich Enterprises - IFIP WG 5.1 International Conference, PLM 2012, Revised Selected Papers (Montreal, QC, Canada, July 9-11, 2012) Springer New York
A. Sakkouhi, Sylvie Nadeau. 2012 « Le système qui va changer le monde. Faut-il se fier au Lean Manufacturing? ». Affiche présentée lors de la conférence : Colloque de la Direction de la Santé Publique de Montréal (Montréal, QC, Canada, 29 mars 2012)
L. Sarrat, A. Chamanfar, Mohammad Jahazi. 2012 « Microstructure evolution of Ni base superalloys during thermomechanical processing ». Communication lors de la conférence : Research and Innovation for Transport Systems of the Future (Paris, France, Nov. 12-15, 2012)
Davood Shahriari, Iman Heidari, Kitae Kim, Mohammad Jahazi. 2012 « Welding temperature distribution in low carbon steel sheets by FDM and FEM ». Proceedings of the 14th International Conference on Metal Forming, METAL FORMING 2012 (Krakow, Poland, Sept. 16-19, 2012) Wiley-VCH Verlag
V. Songmene, J. Kouam, I. Zaghbani, N. Parson, A. Maltais. 2012 « Global machinability of Al-Mg-Si extrusions ». In Aluminium Alloys - New Trends in Fabrication and Applications. p. 223-251. InTech
Victor Songmene, Riad Khettabi, Jules Kouam. 2012 « Dry high-speed machining: A cost effective and green process ». International Journal of Manufacturing Research vol. 7 , nº 3. p. 229-256
Benoit St-Pierre, Jean-François Chatelain, Louis Dufresne. 2012 « Développement d’un modèle semi-empirique pour la prédiction de la cohérence d’un jet utilisé dans les procédés de rectification ». Transactions of the Canadian Society for Mechanical Engineering vol. 36 , nº 2. p. 127-142
Abbas Tamadon, Ali Shokuhfar, Hossein Yoozbashizadeh, Mohammad Jahazi. 2012 « The role of carbon nanotubes in synthesis of TaC nanoparticles by gas – solid reaction ». Advanced Processes in Materials vol. 6 , nº 3 (22). p. 1-7
B. Wenga, A. Djebara, R. Kamguem, J. Kouam, V. Songmene. 2012 « Diluteur approprié pour la mesure des concentrations élevées en poussières fines et ultrafines au cours de l'usinage à sec ». Affiche présentée lors de la conférence : 17e Colloque international en évaluation environnementale (Montréal, QC, Canada, 12-15 juin 2012)
B. Wenga Ntcheping, R. Kamguem, J. Kouam, V. Songmene. 2012 « Numerical study and simulation in COMSOL multiphysics of the dilution process during Dust's sampling in dry machining ». COMSOL Conference 2012 (Boston, MA, USA, Oct. 03-05, 2012) COMSOL
Imed Zaghbani, Jean-Fraçois Chatelain, Victor Songmene, Sébastien Bérubé, Abdelatif Atarsia. 2012 « A comprehensive analysis of cutting forces during routing of multilayer carbon fiber-reinforced polymer laminates ». Journal of Composite Materials vol. 46 , nº 16. p. 1955-1971
Imed Zaghbani, Jean-François Chatelain, Sébastien Bérubé, Victor Songmene, Justin Lance. 2012 « Analysis and modelling of cutting forces during the trimming of unidirectional CFRP composite laminates ». International Journal of Machining and Machinability of Materials vol. 12 , nº 4. p. 337-357
Imed Zaghbani, Walid Jomaa, Victor Songmene, Louis-Philippe L. Boire, Hoang Lehuy. 2012 « Investigation on tool wear during dry and wet machining of hardened mould steels ». International Journal of Civil Engineering and Building Materials vol. 2 , nº 3. p. 124-131
S. Zamani, H. Razavizadeh, Mohammad Jahazi. 2012 « Microstructure and hardness control of a binary -TiAl alloy by heat treatment ». 2nd International Advances in Applied Physics and Material Science (Antalya, Turkey, Apr. 26-29, 2012) Applied Physics and Material Science (APMAS)
S. Zamani, H. Razavizadeh, Mohammad Jahazi. 2012 « The influence of heat-treatment cycles on pressure strength of a binary-TiAl alloy ». 2nd International Advances in Applied Physics and Material Science (Antalya, Turkey, Apr. 26-29, 2012) Applied Physics and Material Science (APMAS)
Y. Zedan, A. Djebara, Victor Songmene, S. A. Niknam. 2012 « Burr size minimization when drilling 6061-t6 aluminum alloy ». ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012 (Houston, TX, USA, Nov. 9-15, 2012) American Society of Mechanical Engineers
Yasser Zedan, Riad Khettabi, Imed Zaghbani, Jules Kouam, Jacques Masounave, Victor Songmene. 2012 « Experimental investigation of cutting fluid influence on drilled aluminum part quality ». International Journal of Civil Engineering and Building Materials vol. 2 , nº 2. p. 78-84

C. A. C. Alba, Martin Viens, X.-W. Tu. 2011 « Development of an image acquisition and processing system for automation of fluorescent penetrant inspection (FPI) ». 58th Aeronautics Conference and AGM (AERO 2011) (Montreal, Canada, Apr. 26-28, 2011) Canadian Aeronautics and Space Institute
Barthélemy Ateme-Nguema, Sylvie Nadeau, Claude Viau, Michel Camus, Stéphane Hallé, Yves Cloutier. 2011 « Aides à la décision & intelligence artificielle : méthodes à l'apparence impénétrable démystifiées : partie 2 : recours aux métaheuristiques ». Communication lors de la conférence : Séminaire de l'Université de Montréal (Montréal, QC, Canada, 28 sept. 2011)
A. Badri, Sylvie Nadeau, A. Gbodossou. 2011 « A new paradigm for integrating occupational health and safety into project risk evaluation ». Dokumentation des 57. Arbeitswissenschaftlichen Kongresses in Chemnitz [Documentation of the 57th Work Scientific Congress in Chemnitz ] (Chemnitz, Allemagne , Mar. 23-25, 2011) GfA-Press
A. Badri, Sylvie Nadeau, A. Gbodossou. 2011 « Gérer les risques de santé et de sécurité du travail : une nouvelle démarche appliquée à un projet minier québécois ». 33e Congrès de l’AQHSST (Trois-Rivières, QC, Canada, 11-13 mai 2011)
Adel Badri, Sylvie Nadeau, André Gbodossou. 2011 « Gestion intégrée des risques de SST : cas d'une mine à ciel ouvert au Québec ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels (Montréal, QC, Canada, 8 déc. 2011)
Adel Badri, Sylvie Nadeau, André Gbodossou. 2011 « Integration of OHS into risk management in an open-pit mining project in Quebec (Canada) ». Minerals vol. 1 , nº 1. p. 3-29
Adel Badri, Sylvie Nadeau, André Gbodossou. 2011 « Intégrer la SST dans la gestion de projets industriels ». Travail et santé vol. 27 , nº 2. p. 28-29
Vladimir Brailovski, S. D. Prokoshkin, K. E. Inaekyan, V. Demers. 2011 « Functional properties of nanocrystalline, submicrocrystalline and polygonized Ti-Ni alloys processed by cold rolling and post-deformation annealing ». Journal of Alloys and Compounds vol. 509 , nº 5. p. 2066-2075
Antoine Brière-Côté, Louis Rivest, Roland Maranzana. 2011 « Three-step approach for structuring 3D CAD model comparison scenarios ». Product Lifecycle Management : Virtual Product Lifecycles for Green Products and Services : Proceedings of the PLM11 conference held at the Eindhoven (Eindhoven, The Netherlands, July 11-13, 2011) IFIP Working Group 5.1
Q. H. Bui, Tan Pham. 2011 « Modeling of microstructure effects on the mechanical behavior of ultrafine-grained nickels processed by hot isostatic pressing ». International Journal of Mechanical Sciences vol. 53 , nº 10. p. 812-826
Q. H. Bui, Tan Pham, M. Fafard. 2011 « A self-consistent model predicting the mechanical behavior of cold-draw 6063 aluminium tubes ». COM 2011 : Conference of Metallurgists (Montreal, Canada, Oct. 2-5, 2011)
X. Cao, M. Jahazi. 2011 « Effect of tool rotational speed and probe length on lap joint quality of a friction stir welded magnesium alloy ». Materials and Design vol. 32 , nº 1. p. 1-11
A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, S. Yue. 2011 « Mechanical property and microstructure of linear friction welded WASPALOY ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 42 , nº 3. p. 729-744
Jean-François Chatelain, J. F. Lalonde, Antoine Tahan. 2011 « A comparison of the distortion of machined parts resulting from residual stresses within workpieces ». 4th International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS) (Barcelona, Spain, Sept. 15-17, 2011) World Scientific and Engineering Academy and Society
Jean-François Chatelain, Imed Zaghbani. 2011 « Effect of tool geometry special features on cutting forces of multilayered CFRP laminates ». 4th International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS) (Barcelona, Spain, Sept. 15-17, 2011) World Scientific and Engineering Academy and Society
E. Dalgaard, P. Wanjara, G. Trigo, M. Jahazi, G. Comeau, J. J. Jonas. 2011 « Linear friction welding of Al-Cu Part 2 - interfacial characteristics ». Canadian Metallurgical Quarterly vol. 50 , nº 4. p. 360-370
S. Demers, Sylvie Nadeau, Abdel-Hakim Bouzid. 2011 « Une approche analytique pour la modélisation réaliste du mécanisme lésionnel de la hernie discale ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels (Montréal, QC, Canada, 10 mars 2011)
S. Demers, Sylvie Nadeau, Abdel-Hakim Bouzid. 2011 « Étude analytique des zones critiques du disque intervertébral L5-S1 soumis à une compression quasi statique ». Travail et Santé vol. 27 , nº 4. p. 23
Frédéric Demoly, Xiu-Tian Yan, Benoît Eynard, Louis Rivest, Samuel Gomes. 2011 « An assembly oriented design framework for product structure engineering and assembly sequence planning ». Robotics and Computer-Integrated Manufacturing vol. 27 , nº 1. p. 33-46
A. Djebara, R. Khettabi, J. Kouam, Victor Songmene. 2011 « Characterization of fine and ultrafine particles produced during dry machnining of aluminum alloys ». Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 03-05, 2011) MetSoc
Abdelhakim Djebara, Riad Khettabi, Jules Kouam, Victor Songmene. 2011 « Comparison of the capability of peak function in describing real condensation particle counter profiles ». 2nd International Conference on Laser and Plasma Applications in Materials Science, (LAPAMS) (Algiers, Algeria, Nov. 27-30, 2010) Trans Tech Publications
B. Emami-Mehrgani, Sylvie Nadeau, Jean-Pierre Kenné. 2011 « Optimisation des politiques de surveillance par le biais du cadenassage/décadenassage ». 33e Congrès de l’AQHSST (Trois-Rivières, QC, Canada, 11-13 mai 2011)
B. Emami-Mehrgani, Sylvie Nadeau, Jean-Pierre Kenné. 2011 « Temps moyen de cadenassage/décadenassage : un outil d'optimisation des politiques de surveillance ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels (Montréal, QC, Canada, 14 avril 2011)
Behnam. Emami-Mehrgani, Sylvie Nadeau, Jean-Pierre Kenné. 2011 « Lockout/tagout and operational risks in the production control of a transfer line with passive redundancy ». ASME International mechanical engineering congress and exposition (IMECE) (Denver, CO, USA, Nov. 11-17, 2011) ASME
Behnam Emami-Mehrgani, Adel Badri, Sylvie Nadeau. 2011 « Établissement d'un portrait de risques, secteur du démantèlement de véhicules ». Montréal, Québec, Canada : École de technologie supérieure, Université du Québec. 88 p.
Behnam Emami-Mehrgani, Sylvie Nadeau, Jean-Pierre Kenné. 2011 « Cadenassage et baisse des coûts de production ». Travail et santé vol. 27 , nº 2. p. 13-15
Behnam Emami-Mehrgani, Sylvie Nadeau, Jean-Pierre Kenné. 2011 « Lockout/tagout and operational risks in the production control of manufacturing systems with passive redundancy ». International Journal of Production Economics vol. 132 , nº 2. p. 165-173
Behnam Emami-Mehrgani, Sylvie Nadeau, Jean-Pierre Kenné. 2011 « Temps moyen de cadenassage/décadenassage : un outil d’optimisation des politiques de surveillance et de maintenance ». Travail et Santé vol. 27 , nº 4. p. 22
L. A. Généreux, Martin Viens, G. Lebrun. 2011 « Comparison of ultrasonic testing and infrared thermography for the detection of machining defects in composite materials ». Proceedings of the American Society for Composites--Twenty-Sixth Technical Conference (Montréal, Canada, Sept. 26-28, 2011) DEStech Publications Inc.
W. Jomaa, N. Ben Fredj, I. Zaghbani, V. Songmene. 2011 « Non-conventional turning of hardened AISI D2 tool steel ». International Journal of Advances in Machining and Forming Operations vol. 3 , nº 2. p. 93-126
Denis Jouffroy, Alain Desrochers, Louis Rivest. 2011 « Numerical representation of interface control documents (ICDs) for collaborative engineering ». Product Lifecycle Management : Virtual Product Lifecycles for Green Products and Services : Proceedings of the PLM11 conference held at the Eindhoven (Eindhoven, The Netherlands, July 11-13, 2011) IFIP Working Group 5.1
René Kamguem, Victor Songmene, Jean-Pierre Kenné, Antoine Tahan. 2011 « Surface quality of 7075-T6 aluminum alloy machined using high-speed milling process ». Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, Canada, Oct. 2-5, 2011) MetSoc
Riad Khettabi, Imed Zaghbani, Abdelhakim Djebara, Jules Kouam, Victor Songmene. 2011 « A new sustainability model for machining processes ». International Journal of Business Continuity and Risk Management vol. 2 , nº 3. p. 187-202
Riad Khettabi, Yasser Zedan, Jacques Masounave, Victor Songmene. 2011 « On particle emission during machining of titanium and aluminum alloys ». Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 03-05, 2011) MetSoc
Jules Kouam, Yasser Zedan, Abdelhakim Djebara, Jacques Masounave, Victor Songmene. 2011 « Machinability of A356 and A319 aluminum alloy ». Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 02-05, 2011) MetSoc
Annie Francie Kouedeu, Jean-Pierre Kenné, Victor Songmene. 2011 « Production, preventive and corrective maintenance planning in manufacturing systems under imperfect repairs ». 3rd International Workshop on Dependable Control of Discrete Systems (DCDS) (Saarbrucken, Germany, June 15-17, 2011) IEEE
S. B. Lagnika, Sylvie Nadeau. 2011 « La gestion des mines, ça s'intègre! ». Affiche présentée lors de la conférence : Colloque de la Direction de la Santé Publique de Montréal (Montréal, Canada, 31 mars 2011)
M. Lamraoui, Marc Thomas, M. El Badaoui, I. Zaghbani, Victor Songmene. 2011 « New indicators based on cyclostationarity approach for machining monitoring ». International Conference Surveillance 6 (Compiègne, France, Oct. 25-26, 2011)
Mourad Lamraoui, Marc Thomas, Mohamed El Badaoui, Imed Zaghbani, Victor Songmene. 2011 « The angular kurtosis and power : new tools for machining monitoring ». DINAME : The 14th International Symposium on Dynamic Problems of Mechanics (Sao Paulo, Brazil, Mar. 13-18, 2011) ABCM
Sylvie Nadeau, Jean Arteau, Constantin Manolache. 2011 « Reinforcing bar installation : case study of a training center for the steel trades ». 57. Kongress der Gesellschaft für Arbeitswissenschaftlichen (Chemnitz, Allemagne, Mar. 23-25, 2011) GfA-Press
Sylvie Nadeau, B. Ateme-Nguema. 2011 « L'intégration de la santé et de la sécurité du travail aux risques opérationnels: un défi bouleversant la culture organisationnelle ». Communication lors de la conférence : MBA UQAT 2011, Rouyn-Noranda (Rouyn-Noranda, QC, Canada, 20 mai 2011)
Sylvie Nadeau, Adel Badri, Sémirath Brice Lagnika, Amine Sakkouhi, Behnam Emami-Mehrgani. 2011 « Courrier du lecteur : Sensibiliser les ingénieurs à la santé publique : Constat d’impuissance ou force tranquille? ». Travail et Santé vol. 27 , nº 2. p. 35-36
Sylvie Nadeau, Stéphane Hallé, Maximilien Debia. 2011 « Comment améliorer le développement des nanomatériaux au Québec ». Communication lors de la conférence : Atelier nanomatériaux (Montréal, QC, Canada, 3 juin 2011)
Sylvie Nadeau, Jean-Pierre Kenné. 2011 « Reduction of machine safety risks through optimal management of production : reflections on a decade research ». Dokumentation des 57. Arbeitswissenschaftlichen Kongresses in Chemnitz [Documentation of the 57th Work Scientific Congress in Chemnitz ] (Chemnitz, Allemagne , Mar. 23-25, 2011) GfA-Press
Sylvie Nadeau, Claude Viau, Stéphane Hallé, Barthélemy Ateme-Nguema. 2011 « Les risques pour la santé humaine posés par les nanoparticules : pourquoi privilégier une gestion adaptative ? ». Communication lors de la conférence : Axe Nanotoxicologie du RRSSTQ (4 mai 2011)
Seyed Ali Niknam, Azziz Tiabi, Imed Zaghbani, Rene Kamguem, Victor Songmene. 2011 « Milling burr size estimation using acoustic emission and cutting forces ». ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011 (Denver, CO, United states, Nov. 11-17, 2011) American Society of Mechanical Engineers
Virgilio Quintana, Louis Rivest, Robert Pellerin, Frederick Venne. 2011 « Methodology for the implementation of the model-based definition approach ». Journal of Operations and Logistics vol. 4 , nº 3. p. 11.1-11.12
Victor Songmene, R. Khettabi, I. Zaghbani, J. Kouam, A. Djebara. 2011 « Machining and Machinability of Aluminum Alloys ». In Aluminium Alloys, Theory and Applications. p. 377-400. InTech
Serge St-Martin, Jean-François Chatelain, René Mayer, Serafettin Engin, Stéphane Chalut. 2011 « Prediction of thin wall surface shape through simulation of the machining process for light alloy workpieces ». Journal of Machining and Forming Technologies vol. 3 , nº 3-4. p. 185-202
Martin Viens, N. Fournier, S. Carpentier. 2011 « Les défis NDT en aéronautique ». Communication lors de la conférence : Atelier Organisé dans le Cadre du Colloque Aérotechnique (Montréal, QC, Canada, 15 mars 2011)
Jomaa Walid, Imed Zaghbani, Victor Songmene, Louis-Philippe L. Boire, Hoang LeHuy. 2011 « Dry and wet machinability of hardened mould steels ». Proceedings of the International Conference on Environmental Pollution and Remediation (Ottawa, ON, Canada, Aug. 17-19, 2011) ASET
I. Zaghbani, J.-F. Chatelain, V. Songmene, S. Bérubé, A. Atarsia. 2011 « Modeling of cutting forces for multilayered CFRP laminates ». 26th Annual Technical Conference of the American Society for Composites : 2nd Joint US-Canada Conference on Composites (Montreal, QC, Canada, Sept. 26-28, 2011) DEStech Publications
I. Zaghbani, M. Lamraoui, V. Songmene, M. Thomas, M. El Badaoui. 2011 « Robotic high speed machining of aluminum alloys ». High Speed Machining : The 4th International Conference on High Speed Machining (ICHSM’2010) (Guangzhou, Guangdong, China, Oct. 9-10, 2010) Trans Tech Publications
Yasser Zedan, Riad Khettabi, Victor Songmene, Jacques Masounave. 2011 « Effect of lubrication and application modes on drilled aluminum part quality ». Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 02-05, 2011) MetSoc

Béchir Badri, Marc Thomas, Sadok Sassi, Imed Zaghbani, Victor Songmene. 2010 « Étude du comportement des roulements dans les rotors tournant à haute vitesse ». Revue Internationale sur l'Ingénierie des Risques Industriels vol. 3 , nº 1
Adel Badri, Sylvie Nadeau, André Gbodossou. 2010 « Intégrer les risques de santé et de sécurité du travail dans la gestion des projets industriels ». 32e Congrès de l'Association Québécoise pour l'Hygiène, la Santé et la Sécurité du Travail (Lévis, Québec, Canada, 12-14 mai 2010)
Adel Badri, Sylvie Nadeau, André Gbodossou. 2010 « Intégrer les risques de santé et sécurité du travail dans la conduite de projets ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels, RRSSTQ, ÉREST, ÉTS (Montréal, Québec, Canada, 16 sept. 2010)
N. Bastajib, N. Boutana, P. Bocher, M. Jahazi. 2010 « Application of cellular automata method to simulate the hot deformation behavior of a dual phase titanium alloy ». Technische Mechanik vol. 30 , nº 1-3
G. Bernier, Yvan Petit, Françoise Marchand, Patrick Terriault, Sylvie Nadeau. 2010 « Case study : toy design ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. p. 74-82. Cambridge Scholars Publishing
Hakim Bouzid, Jean-Pierre Kenné, Sylvie Nadeau. 2010 « Case study : designing a log splitter ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. p. 7-13. Cambridge Scholars Publishing
Hakim Bouzid, Sylvie Nadeau, Jean-Pierre Kenné. 2010 « Case study : designing a boom lift ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. p. 36-53. Cambridge Scholars Publishing
Hakim Bouzid, Sylvie Nadeau, Jean-Pierre Kenné. 2010 « Case study : designing a hydraulic car lift for small auto repair shops ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. p. 26-35. Cambridge Scholars Publishing
Hakim Bouzid, Sylvie Nadeau, Jean-Pierre Kenné. 2010 « Case study : gasket test rig ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. p. 1-6. Cambridge Scholars Publishing
Antoine Bres, Bruno Monsarrat, Laurent Dubourg, Lionel Birglen, Claude Perron, Mohammad Jahazi, Luc Baron. 2010 « Simulation of friction stir welding using industrial robots ». Industrial Robot vol. 37 , nº 1. p. 36-50
Matthieu Bricogne, Nadège Troussier, Louis Rivest, Benoît Eynard. 2010 « PLM perspectives in mechatronic systems design ». Advances in Production Management Systems (APMS) (Cernobbio, Lake Como, Italy, Oct. 11-13, 2010)
Antoine Brière-Côté, Louis Rivest. 2010 « Vers une nouvelle approche pour la mesure et la représentation des différences entre modèles géométriques. ». Communication lors de la conférence : 4e Édition du Colloque sur les Technologies CAO/FAO au Québec (Sherbrooke, Canada, 19 mai 2010)
Antoine Brière-Côté, Louis Rivest, Alain Desrochers. 2010 « Adaptive generic product structure modelling for design reuse in engineer-to-order products ». Computers in Industry vol. 61 , nº 1. p. 53-65
Xinjin Cao, Guillaume Debaecker, Mohammad Jahazi, Surendar Marya, Jonathan Cuddy, Anand Birur. 2010 « Effect of post-weld heat treatment on Nd: YAG laser welded Ti-6Al-4V alloy quality ». THERMEC 2009 Trans Tech Publications Ltd
Xinjin Cao, Mohammad Jahazi. 2010 « Friction stir welding of dissimilar AA 2024-T3 to AZ31B-H24 alloys ». THERMEC 2009 Supplement (Berlin, Germany, ) Trans Tech Publications Ltd
E. Dalgaard, F. Coghe, L. Rabet, M. Jahazi, P. Wanjara, J. J. Jonas. 2010 « Texture evolution in linear friction welded Ti-6Al-4V ». THERMEC 2009 Supplement (Berlin, Germany, Aug. 25-29, 2009) Trans Tech Publications
Sébastien Demers, Hakim A. Bouzid, Sylvie Nadeau. 2010 « La hernie discale: mieux la comprendre pour mieux la prévenir ». Congrès AQHSST 2010 (Lévis, QC, Canada, 12-14 mai 2010) Association québécoise pour l'hygiène, la santé et la sécurité du travail
Frédéric Demoly, Samuel Gomes, Benoît Eynard, Louis Rivest. 2010 « PLM-based approach for Assembly Process Engineering ». International Journal of Manufacturing Research vol. 5 , nº 4. p. 413-428
Frédéric Demoly, Davy Monticolo, Benoît Eynard, Louis Rivest, Samuel Gomes. 2010 « Multiple viewpoint modelling framework enabling integrated product-process design ». International Journal on Interactive Design and Manufacturing vol. 4 , nº 4. p. 269-280
Abdelhakim Djebara, Riad Khettabi, Jules Kouam, Victor Songmene. 2010 « Experimental investigation on ultrafine particles emission during dry machining using statistical tools ». International Conference on Nanotechnology : Fundamentals and Applications (Ottawa, Ont., Canada, Aug. 4-6, 2010)
Abdelhakim Djebara, Riad Khettabi, Seyed Ali Niknam, Victor Songmene. 2010 « Ultrafine particles sampling during machining of aluminum alloys : application to the nanoparticles metrology ». Communication lors de la conférence : Journée des Étudiants du Centre de Recherche sur l'Aluminium (REGAL) (Laval, Québec, Canada, 26 oct. 2010)
L. Dubourg, P. Doran, S. Larose, M. A. Gharghouri, M. Jahazi. 2010 « Prediction and measurements of thermal residual stresses in AA2024-T3 friction stir welds as a function of welding parameters ». THERMEC 2009 Supplement (Berlin, Germany, Aug. 25-29, 2009) Trans Tech Publications Ltd
L. Dubourg, A. Merati, M. Jahazi. 2010 « Process optimisation and mechanical properties of friction stir lap welds of 7075-T6 stringers on 2024-T3 skin ». Materials and Design vol. 31 , nº 7. p. 3324-3330
B. Emami-Mehrgani, S. Nadeau, J. P. Kenné. 2010 « Optimisation des politiques de surveillance dans le milieu de l'industrie par la gestion de la procédure de cadenassage/décadenassage ». Communication lors de la conférence : Conférences mensueles en sécurité du travail et contrôle des risques industriels RRSSTQ, ÉREST, ÉTS (Montréal, QC, Canada, 9 déc. 2010)
Behnam Emami-Mehrgani, Sylvie Nadeau, Jean-Pierre Kenné. 2010 « Gérer le cadenassage/décadenassage : une stratégie de production optimale ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels, RRSSTQ, ÉREST, ÉTS (Montréal, Québec, Canada, 9 déc. 2010)
Behnam Emami-Mehrgani, Sylvie Nadeau, Jean-Pierre Kenné. 2010 « Integrating lockout/tagout with operational risks : the passive redundancy case ». 56 Kongress der Gesellschaft für Arbeitswissenschaft (GFA) (Darmstadt, Germany, Mar. 24-26, 2010)
F. Gemme, Y. Verreman, L. Dubourg, M. Jahazi. 2010 « Numerical analysis of the dwell phase in friction stir welding and comparison with experimental data ». Materials Science and Engineering: A vol. 527 , nº 16-17. p. 4152-4160
René Kamguem, Victor Songmene, Seyed Ali Niknam. 2010 « Assessing the influence of acoustic emission parameters on machining processing using statistical analysis ». Proceedings of the Canadian Society of Mechanical Engineering Forum (Victoria, B.C, Canada, June 7-9, 2010)
Jean-Pierre Kenné, Hakim Bouzid, Sylvie Nadeau. 2010 « Case study : designing a lift truck ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. p. 132-138. Cambridge Scholars Publishing
Jean-Pierre Kenné, Hakim Bouzid, Sylvie Nadeau. 2010 « Case study : designing an aerial work platform vehicle ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. p. 54-60. Cambridge Scholars Publishing
Jean-Pierre Kenné, Sylvie Nadeau, Hakim Bouzid. 2010 « Case study : automated overhead crane ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. Cambridge Scholars Publishing
Fawzi Kheddouci, Louis Rivest. 2010 « Archivage long-terme de la maquette numérique enrichie : problématique et alternatives de solutions ». Communication lors de la conférence : 4e Édition du Colloque sur les Technologies CAO/FAO au Québec (Sherbrooke, Canada, 19 mai 2010)
Riad Khettabi, Abdelhakim Djebara, Victor Songmene. 2010 « Characterization and control of micro and nanoparticles produced during dry cutting ». X th Safety, Health and Environment World Congress (São Paulo, Brazil, July, 25-28, 2010)
Riad Khettabi, Jacques Masounave, Victor Songmene. 2010 « Influence of machining processes on particles emissions ». 49th Annual Conference of Metallurgists (COM) (Vancouver, B.C., Canada, Oct. 3-6, 2010)
Riad Khettabi, Victor Songmene. 2010 « Caractérisation et mesure des particules ultrafines émises lors du frottement et des procédés d'usinage ». Communication lors de la conférence : Activité d'animation scientifique de la communauté nanotoxicologie du Réseau de recherche en santé et sécurité du travail du Québec (RRSSTQ) (Montréal, Canada, 18 mars 2010)
Riad Khettabi, Victor Songmene, Jacques Masounave. 2010 « Effects of speeds, materials, and tool rake angles on metallic particle emission during orthogonal cutting ». Journal of Materials Engineering and Performance vol. 19 , nº 6. p. 767-775
Riad Khettabi, Victor Songmene, Imed Zaghbani, Jacques Masounave. 2010 « Modeling of particle emission during dry orthogonal cutting ». Journal of Materials Engineering and Performance vol. 19 , nº 6. p. 776-789
Jules Kouam, Jacques Masounave, Victor Songmene, Alain Giraudeau. 2010 « Pre-holes effect on cutting forces and particle emission during dry drilling ». 49th Annual Conference of Metallurgists (COM) (Vancouver, B.C., Canada, Oct. 3-6, 2010)
Jules Kouam, Victor Songmene, Abdelhakim Djebara, Riad Khettabi. 2010 « Metallic particle emission during friction testing of metals ». International Conference on Nanotechnology : Fundamentals and Applications (Ottawa, Ont., Canada, Aug. 4-6, 2010)
Christian Larivière, Guy Tremblay, Sylvie Nadeau, Lotfi Harrabi, Patricia Dolez, Toan Vu-Khanh, Jaime Lara. 2010 « Do mechanical tests of glove stiffness provide relevant information relative to their effects on the musculoskeletal system? : a comparison with surface electromyography and psychophysical methods ». Applied Ergonomics vol. 41 , nº 2. p. 326-334
S. Larose, L. Dubourg, C. Perron, M. Jahazi, P. Wanjara. 2010 « Limitation of distortion in friction stir welded (FSW) panels using needle peening ». THERMEC 2009 (Berlin, Germany, Aug. 25-29, 2009) Trans Tech Publications Ltd
Jimmy Malkoun, Mickaël Gardoni, Louis Rivest. 2010 « The main elements brought by MOKA (KBE method) to promote an accelerated technology transfer process between aerospace and automotive industries ». ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE2010) (Montréal, Québec, Canada, Aug. 15–18, 2010) American Society of Mechanical Engineers
Constantin T. Manolache, Sylvie Nadeau, Jean Arteau. 2010 « Social sustainability through occupational health and safety prevention in the construction industry ». Dokumentation des 56. Arbeitswissenschaftlichen Kongresses Darmstadt 24.03.-26.03.2010 (Darmstadt, Germany, Mar. 24-26, 2010) GfA-Press
Sylvie Nadeau, Jean Arteau. 2010 « Case Study : Hybrid vehicle ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. p. 110-116. Cambridge Scholars Publishing
Sylvie Nadeau, Jean Arteau. 2010 « The canadian ergo-engineer ». Communication lors de la conférence : 1st Ergoman Workshop Proceedings : Ergoman-project : Contribution to Ergonomics Training. (Darmstadt, Deutschland, Mar. 24, 2010)
Sylvie Nadeau, Barthélemy Ateme-Nguema, Claudio Benedetti, C. Vachon. 2010 « Case Study : J.L. Vachon : industry leader and pioneer ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. p. 139-150. Cambridge Scholars Publishing
Sylvie Nadeau, Hakim Bouzid, Jean-Pierre Kenné. 2010 « Case study : designing an airplane baggage belt loader ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. p. 125-131. Cambridge Scholars Publishing
Sylvie Nadeau, Jean-Pierre Kenné, Paul Alexandru. 2010 « Modeling the integration of occupational health and safety risks with operational risks associated with autonomous and multi-skilled work performed in uncertain environments ». Revue Internationale sur l'Ingénierie des Risques Industriels vol. 3 , nº 1. p. 17-31
Sylvie Nadeau, Yvan Petit, Stéphane Hallé, François Morency, Louis Dufresne. 2010 « Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics ». Newcastle upon Tyne, UK : Cambridge Scholars Publishing. 152 p.
Sylvie Nadeau, Claude Viau, Michel Camus, Stéphane Hallé, Yves Cloutier, Barthélemy Ateme-Nguema. 2010 « Aides à la décision : méthodes à l'apparence impénétrable démystifiées : partie 1 : techniques analytiques des environnements risqués ». Communication lors de la conférence : Département de Santé Environnementale et Santé au Travail : Faculté de Médecine : Rencontres Scientifiques (Montréal, Québec, Canada, 17 nov. 2010)
Seyed Ali Niknam, Seyed Mehdi Rezaei, Victor Songmene. 2010 « A Review on bearing faults diagnosis using acoustic emission ». 6th National Conference on Maintenance (Tehran, Iran, June 8-9, 2010) Civilica
Seyed Ali Niknam, Seyed Mehdi Rezaei, Victor Songmene. 2010 « Sensitivity of acoustic emission to lubrication on bearing surfaces ». 6th National Conference on Maintenance (Tehran, Iran, June 8-9, 2010) Civilica
Seyed Ali Niknam, Victor Songmene, Y.H. Joe Au. 2010 « Bearing condition monitoring in low rotating speed machine using acoustic emission ». Proceedings of the Canadian Society of Mechanical Engineering Forum (Victoria, B.C, Canada, June 7-9, 2010)
Seyed Ali Niknam, René Kamguem, Victor Songmene, Jean-Pierre Kenné. 2010 « Machining factors influence on acoustic emission parameters ». International Journal of Advances in Machining and Forming Operations vol. 2 , nº 2. p. 91-114
Seyed Ali Niknam, Victor Songmene. 2010 « The influence of bearing operational conditions on acoustic emission parameters ». Proceedings of the Canadian Society of Mechanical Engineering Forum (Victoria, B.C, Canada, June 7-9, 2010)
Virgilio Quintana, Louis Rivest, Robert Pellerin, Frédérick Venne, Fawzi Kheddouci. 2010 « Will model-based definition replace engineering drawings throughout the product lifecycle? A global perspective from aerospace industry ». Computers in Industry vol. 61 , nº 5. p. 497-508
Boris Rabussier, Jacek Litwin, Victor Songmene, Jacques Masounave. 2010 « Effect of temperature and stress on friction of metal matrix composite ». 49th Annual Conference of Metallurgists (COM) (Vancouver, BC, Canada, Oct. 3-6, 2010)
Louis Rivest, Fawzi Kheddouci, Clément Fortin. 2010 « Towards long-term archiving of 3D annotated models : a sneak peek to a potential solution ». International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME) : Virtual Concept 2010 (Bordeaux, France, Oct. 20-22, 2010)
Victor Songmene. 2010 « Automated deburring and part finishing : progress and realisations ». Communication lors de la conférence : CRIAQ : Réunions du comité de recherche (Montréal, Canada, 13 janv. 2010)
Frédérick Venne, Louis Rivest, Alain Desrochers. 2010 « Assessment of 3D annotation tools as a substitute for 2D traditional engineering drawings in aerospace product development ». Computer-Aided Design and Applications vol. 7 , nº 4. p. 547-563
P. Vo, M. Jahazi, S. Yue. 2010 « FEM modelling of recrystallization behaviour for near-alpha Ti alloy IMI834 ». THERMEC 2009 Supplement (Berlin, Germany, Aug. 25-29, 2009) Trans Tech Publications
Imed Zaghbani, Victor Songmene, Guillaume Kientzy, Hoang LeHuy. 2010 « Evaluation of sustainability of mould steels based on machinability data ». International Journal of Machining and Machinability of Materials vol. 7 , nº 1-2. p. 58-81
Imed Zaghbani, Victor Songmene, D. Tousignant. 2010 « A method for selection of the cutting conditions during robotic machining through the vibration response ». Premier Colloque International Innovations en Mécaniques Passives et ACTives pour l’ Analyse et la Conception des Systèmes Mécaniques (IMPACT) = First International Conference Passives and Actives Mechanical Innovations in Analysis and Design of Mechanica (Djerba, Tunisie, 22-24 août 2010)

B. Ateme-Nguema, Sylvie Nadeau, A. Arts. 2009 « Integration of health and safety with operational risks: an overview on cells manufacturing ». 17th World Congress on Ergonomics : August 9-14, 2009, Beijing, China (Beijing, China, Aug. 9-14, 2009) International Ergonomics Association
A. Badiane, Jean-Pierre Kenné, Sylvie Nadeau. 2009 « Produire à moindre coût dans un espace sécuritaire ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels (Montréal, QC, Canada, 11 juin 2009)
Béchir Badri, Marc Thomas, Sadok Sassi, Imed Zaghbani, Victor Songmene, A. A. Lakis, N. Mureithi. 2009 « Instabilité des fraiseuses opérant à haute vitesse, provoquée par l’intéraction des défauts de roulements avec les résonances ». Proceedings of the 27th Seminar on Machinery Vibration (Vancouver, BC, Canada, Oct. 28-30, 2009)
Béchir Badri, Marc Thomas, Sadok Sassi, Imed Zaghbani, Victor Songmene, A. A. Lakis, N. Mureithi. 2009 « Étude du comportement des roulements dans les rotors tournant à haute vitesse. ». 2nd International Conference on Industrial Risk Engineering = 2e Congrès International sur l'Ingénierie des Risques Industriels (CIRI) (Reims, France, 13-15 mai 2009)
B. Balout, Jacques Masounave, Victor Songmene. 2009 « Modeling of eutectic macrosegregation in centrifugal casting of thin walled ZA8 zinc alloy ». Journal of Materials Processing Technology vol. 209 , nº 18-19. p. 5955-5963
Bahaa Balout, Victor Songmene, Jacques Masounave. 2009 « Mise en forme par centrifugation d'un composite à matrice d'aluminium gradué : modélisation de la ségrégation des particules pendant le processus de solidification ». In Encyclopédie de la recherche sur l'aluminium au Québec. Les Presses de l'aluminium PRAL
V. Brailovski, S. D. Prokoshkin, V. Demers, K. Inaekyan, I. Yu Khmelevskaya. 2009 « Property features of Ti-Ni SMA subjected to severe cold rolling and post-deformation annealing ». Proceedings of the International Conference on Martensitic Transformations, June 29-July 05, 2008 : ICOMAT : Santa Fe, New Mexico, USA, 2008 (Santa Fe, NM, USA, June 29-July 5, 2008) TMS (The Minerals, Metals & Materials Society)
Vladimir Brailovski, S. D. Prokoshkin, K. E. Inaekyan, V. Demers. 2009 « Functional properties of nanocrystalline, submicrocrystalline and polygonized Ti-Ni alloys processed by cold rolling and post-deformation annealing ». 8th European Symposium on Martensitic Transformations (ESOMAT) (Prague, Czech Republic, Sept. 7-11, 2009) E D P Sciences
X. Cao, M. Jahazi. 2009 « Effect of welding speed on butt joint quality of Ti–6Al–4V alloy welded using a high-power Nd:YAG laser ». Optics and Lasers in Engineering vol. 47 , nº 11. p. 1231-1241
X. Cao, M. Jahazi. 2009 « Effect of welding speed on lap joint quality of AZ31 magnesium alloy ». Trends in Welding Research 2008: Proceedings of the 8th International Conference (Pine Mountain, GA, USA, June 1-6, 2008) ASM International
X. Cao, M. Jahazi. 2009 « Effect of welding speed on the quality of friction stir welded butt joints of a magnesium alloy ». Materials and Design vol. 30 , nº 6. p. 2033-2042
X. Cao, B. Rivaux, M. Jahazi, J. Cuddy, A. Birur. 2009 « Effect of pre- and post-weld heat treatment on metallurgical and tensile properties of Inconel 718 alloy butt joints welded using 4 kW Nd:YAG laser ». Journal of Materials Science vol. 44 , nº 17. p. 4557-4571
A. Chamanfar, M. Jahazi, S. Yue, J. Gholipour, P. Wanjara. 2009 « Linear friction welding behavior of Waspaloy ». Materials Science and Technology Conference and Exhibition 2009, MS and T'09 (Pittsburgh, PA, USA, Oct. 25-29, 2009) Association for Iron and Steel Technology
E. Coman, K. Ghosh, M. Jahazi, L. Dubourg. 2009 « A study of the deformation and residual stress in an aircraft fuselage panel welded by friction stir welding ». International Journal of Advanced Manufacturing System vol. 11 , nº 2. p. 75-84
E. Dalgaard, Mohammad Jahazi, Ali Merati, P. Wanjara. 2009 « Mechanical properties of linear friction welded Ti-6-4V alloy ». XIX International Symposium on Air Breathing Engines 2009 : (ISABE 2009) : Montreal, Canada, 7-11 September 2009 (Montreal, QC, Canada, Sept. 7-11, 2009) American Institute of Aeronautics and Astronautics
Sébastien Demers, Hakim Bouzid, Sylvie Nadeau. 2009 « Étude du mécanisme lésionnel de la hernie discale : une approche analystique de modélisation de la hernie discale ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels (Montréal, QC, Canada, 10 déc. 2009)
V. Demers, Vladimir Brailovski, S. D. Prokoshkin, K. E. Inaekyan. 2009 « Optimization of the cold rolling processing for continuous manufacturing of nanostructured Ti-Ni shape memory alloys ». Journal of Materials Processing Technology vol. 209 , nº 6. p. 3096-3105
V. Demers, Vladimir Brailovski, S. D. Prokoshkin, K. E. Inaekyan. 2009 « Thermomechanical fatigue of nanostructured Ti-Ni shape memory alloys ». Materials Science and Engineering: A vol. 513-514. p. 185-196
Frédéric Demoly, Samuel Gomes, Benoît Eynard, Louis Rivest, Jean-Claude Sagot. 2009 « Assembly-oriented product structure based on preliminary assembly process engineering ». Proceedings of ICED 09, the 17th International Conference on Engineering Design, Vol. 7, Design for X (Stanford, CA, USA, Aug. 24-27, 2009)
Frédéric Demoly, Samuel Gomes, Benoît Eynard, Louis Rivest, Jean-Claude Sagot. 2009 « Vers un modèle multi-vues pour la conception orientée assemblage ». 11ème Colloque National Atelier Inter-Établissements de Productique et Pôle de Ressources Informatiques pour la MECAnique (AIP PRIMECA) (Plagne, France, 22-24 avril 2009)
Abdelhakim Djebara, Victor Songmene. 2009 « Mesure et caractérisation des nanoparticules (Nps) métalliques émises lors de l'usinage ». Affiche présentée lors de la conférence : INNO 09 : La Semaine de l'Innovation (Montréal, Canada, 23-24 avril 2009)
L. Dubourg, J. Gholipour, M. Jahazi. 2009 « Friction stir welding of 2024-T3 aluminum tubes for hydroforming application ». Trends in Welding Research 2008: Proceedings of the 8th International Conference (Pine Mountain, GA, USA, June 1-6, 2008) ASM International
M. Haghshenas, A. Zarei-Hanzaki, M. Jahazi. 2009 « An investigation to the effect of deformation-heat treatment cycle on the eutectic morphology and mechanical properties of a Thixocast A356 alloy ». Materials Characterization vol. 60 , nº 8. p. 817-823
Stéphane Hallé, Jules Kouam, Victor Songmene, François Morency, Martin Viens, Yves Cloutier, Jacques Masounave, Riad Khettabi, Abdelhakim Djebara. 2009 « Procédure de mesure et de contrôle des nanoparticules manufacturés ». Communication lors de la conférence : Conférences Scientifiques, Sécurité des Travailleurs et Contrôle des Risques Industriels (Montréal, QC, Canada, 17 sept. 2009)
R. Khettabi, A. Djebara, V. Songméné, M. Viens, S. Hallé, F. Morency, Y. Cloutier, J. Kouam, J. Masounave. 2009 « Procedure of measuring and controlling manufactured nanoparticles ». Communication lors de la conférence : INNO 2009 : La semaine de l'innovation (Montréal, QC, Canada, 23-24 avr. 2009)
Riad Khettabi, Abdelhakim Djebara, Victor Songmene, Martin Viens, Stéphane Hallé, François Morency, Yves Cloutier, Jules Kouam, Jacques Masounave. 2009 « Control and measuring of manufactured nanoparticle ». Affiche présentée lors de la conférence : INNO 09 : La Semaine de l'Innovation (Montréal, Canada, 23-24 avril 2009)
Riad Khettabi, Abdelhakim Djebara, Victor Songmene. 2009 « Nano and micro particles emission study during metal cutting ». Affiche présentée lors de la conférence : INNO 09 : La Semaine de l'Innovation (Montréal, Canada, 23-24 avril 2009)
Riad Khettabi, Victor Songmene. 2009 « Particle emission during orthogonal and oblique cutting ». International Journal of Advances in Machining and Forming Operations vol. 1 , nº 1. p. 1-10
C. Liu, D. L. Chen, S. Bhole, X. Cao, M. Jahazi. 2009 « Polishing-assisted galvanic corrosion in the dissimilar friction stir welded joint of AZ31 magnesium alloy to 2024 aluminum alloy ». Materials Characterization vol. 60 , nº 5. p. 370-376
Karim Maghni, Sylvie Nadeau. 2009 « Présence d'ODTS et d'ODTS-like dans les mines : réalité et impacts potentiels sur le rendement des mines ». Communication lors de la conférence : MBA UQAT (Université du Québec en Abitibi-Temiscamingue) (Rouyn-Noranda, QC, Canada, 7 mai 2009)
Malek Mansour, Sylvie Nadeau, Jean-Pierre Kenné. 2009 « Management and planning of lockout operations : the case of a high volume packing line ». Arbeit, Beschäftigungsfähigkeit und Produktivität im 21. Jahrhundert : Bericht zum 55. Kongress der Gesellschaft für Arbeitswissenschaft vom 4. - 6. März 2009 [an der Technischen Universität Dortmund] (Dortmund, Germany, Mar. 4-6, 2009) GFA-Press
A. Merati, J. Deronja, L. Dubourg, M. Jahazi. 2009 « Friction stir processing technology for the repair of nickel-aluminum bronze ». Canadian Aeronautics and Space Institute Conference (AERO 2009) (Kanata, ON, Canada, May 5-7, 2009)
A. Merati, L. Dubourg, M. Jahazi. 2009 « Application of FSW technology for additive repair of damaged components ». RTO-MP-AVT-163 Specialists' Meeting on Additive Technology for Repair of Military Hardware (Bonn, Germany, Oct. 19-22, 2009) NATO Science and Technology Organization
Sylvie Nadeau, André Gbodossou, Stéphane Hallé. 2009 « Towards integrating occupational health and safety in industrial project management ». 2nd International Conference on Industrial Risk Engineering = 2e Congrès International sur l'Ingénierie des Risques Industriels (CIRI) (Reims, France, 13-15 mai 2009)
Sylvie Nadeau, Jean-Pierre Kenné, Paul Alexandru. 2009 « Modeling the integration of occupational health and safety risks with operational risks associated with autonomous and multi-skilled work performed in uncertain environments ». 2nd International Conference on Industrial Risk Engineering = 2e Congrès International sur l'Ingénierie des Risques Industriels (CIRI) (Reims, France, 13-15 mai 2009)
X. T. Pham, P. Gougeon, F. O. Gagnon. 2009 « Welding simulation of cast aluminium A356 ». Trends in Welding Research : proceedings of the 8th International Conference (Pine Mountain, GA, USA, June 01-06, 2008) ASM International
Virgilio Quintana, Louis Rivest, Robert Pellerin, Antoine Tahan, Frédérick Venne. 2009 « From fully dimensioned 2D drawings to reduced dimensioning 3D model-based definition ». Proceedings of the International Conference on Product Lifecycle Management : Supporting the Extended Enterprise (Bath, United Kingdom, July 6-9, 2009) Inderscience Enterprise Ltd
Virgilio Quintana, Louis Rivest, Robert Pellerin, Frédérick Venne. 2009 « Methodology for the application of the model-based definition approach for managing the product definition ». International CAD Conference and Exhibition (CAD) (Reno, NV, USA, June 8-12, 2009)
Virgilio Quintana, Louis Rivest, Robert Pellerin, Frédérick Venne. 2009 « Methodology for the implementation of the model-based definition approach ». International Conference on Industrial Engineering and Systems Management (IESM) (Montreal, QC, Canada, May 13-15, 2009)
Louis Rivest. 2009 « CADz Detector : Détecteur de plagiat pour la CAO ». Communication lors de la conférence : Atelier universitaire sur le plagiat dans les universités québécoises à l’ère du numérique (Trois-Rivières, QC, Canada, 29 oct. 2009)
Louis Rivest. 2009 « Le dessin d'ingénierie traditionnel sera-t-il toujours nécessaire? ». Communication lors de la conférence : Journée Thématique - Définition Numérique des Produits (Montréal, QC, Canada, 5 juin 2009)
K. A. Sghir, M. El Badaoui, Marc Thomas, Imed Zaghbani, Victor Songmene, A. A. Lakis, N. Mureithi. 2009 « Identification aveugle paramétrique basée sur la cyclostationnarité à l’ordre deux de la fonction de transfert à partir des mesures vibratoires ». 2nd International Conference on Industrial Risk Engineering = 2e Congrès International sur l'Ingénierie des Risques Industriels (CIRI) (Reims, France, 13-15 mai 2009)
Victor Songmene. 2009 « Dry machining and its effects on machining costs and shop-floor air quality ». Communication lors de la conférence : Hiroshima Aerospace Seminar (Montreal, QC, Canada, Oct. 7, 2009)
Serge St-Martin, Jean-François Chatelain, René Mayer, H. Paris. 2009 « Étude du comportement dynamique d'une paroi mince en alliage léger durant une opération d'usinage haute vitesse ». Revue d'Ingénierie Numérique Collaborative vol. 3 , nº 1
Frédérick Venne, Louis Rivest, Alain Desrochers. 2009 « Capture des notes, dimensions et tolérances au sein de la maquette numérique 3D aéronautique ». Revue d'Ingénierie Numérique Collaborative vol. 3 , nº 1
P. Wanjara, M. Jahazi. 2009 « Application of shear punch testing to study microstructure-property relationships in electron beam welded 17-4 PH stainless steel ». Canadian Metallurgical Quarterly vol. 48 , nº 3. p. 317-326
Imed Zaghbani, Victor Songmene. 2009 « A force-temperature model including a constitutive law for Dry High Speed Milling of aluminium alloys ». Journal of Materials Processing Technology vol. 209 , nº 5. p. 2532-2544
Imed Zaghbani, Victor Songmene. 2009 « Estimation of machine-tool dynamic parameters during machining operation through operational modal analysis ». International Journal of Machine Tools and Manufacture vol. 49 , nº 12-13. p. 947-957
Imed Zaghbani, Victor Songmene, Riad Khettabi. 2009 « Fine and ultrafine particle characterization and modeling in high-speed milling of 6061-T6 aluminum alloy ». Journal of Materials Engineering and Performance vol. 18 , nº 1. p. 38-48
K. Zaras, Sylvie Nadeau, Anh Dung Ngô. 2009 « Vers l'audit de la performance des sous-traitants d'entreprises manufacturières : comment sélectionner des fournisseurs diligents en santé et en sécurité du travail ». 2nd International Conference on Industrial Risk Engineering = 2e Congrès International sur l'Ingénierie des Risques Industriels (CIRI) (Reims, France, 13-15 mai 2009)

N. Afrin, D. L. Chen, X. Cao, M. Jahazi. 2008 « Microstructure and tensile properties of friction stir welded AZ31B magnesium alloy ». Materials Science and Engineering: A vol. 472 , nº 1-2. p. 179-186
H. Al-Kazzaz, M. Medraj, X. Cao, M. Jahazi. 2008 « Nd:YAG laser welding of aerospace grade ZE41A magnesium alloy: modeling and experimental investigations ». Materials Chemistry and Physics vol. 109 , nº 1. p. 61-76
Haider Al-Kazzaz, Xinjin Cao, Mohammad Jahazi, Mamoun Medraj. 2008 « Reliability of laser welding process for ZE41A-T5 magnesium alloy sand castings ». Materials Transactions vol. 49 , nº 4. p. 774-781
B. Ateme-Nguema, Thien-My Dao, Victor Songmene. 2008 « New approach based on RSM and ants colony system for multi-objective Optimization problem: a case study ». 14th International Conference on Industry, Engineering, and Management Systems (IEMS) (Cocoa Beach, FL, USA, Mar. 10-12, 2008)
Bahaa Balout, Victor Songmene, Jacques Masounave. 2008 « Perçage à sec de l'aluminium et alliages métalliques ». 2e Sommet Québec-Aquitaine-Midi-Pyrénées sur l'Usinage Haute Performance : Colloque sur l'Usinage à Sec (Montréal, QC, Canada, 3-5 mars 2008)
Nadjib Bouikni, Louis Rivest, Alain Desrochers. 2008 « A multiple views management system for concurrent engineering and PLM ». Concurrent Engineering: Research and Applications vol. 16 , nº 1. p. 61-72
N. Boutana, P. Bocher, M. Jahazi, D. Piot, F. Montheillet. 2008 « Microstructural modeling of cold creep/fatigue in near alpha titanium alloys using cellular automata method ». Transactions of the Canadian Society for Mechanical Engineering vol. 32 , nº 2. p. 195-213
N. Boutana, Philippe Bocher, M. Jahazi, D. Piot, F. Montheillet. 2008 « The microstructural modeling of room temperature creep in titanium alloys using cellular automata model ». International Journal of Microstructure and Materials Properties vol. 3 , nº 4-5. p. 642-653
X. Cao, M. Guo, M. Jahazi. 2008 « Continuous wave ND:YAG laser welding of Ti-6A1-4V titanium alloy ». 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) Canadian Institute of Mining Metallurgy & Petroleum
X. Cao, M. Jahazi. 2008 « Overview of friction stir and laser welding techniques for lightweight alloys ». Canadian Welding Association Journal. p. 19-30
X. Cao, M. Jahazi, N. Afrin, D. L. Chen. 2008 « Fatigue properties of friction stir welded AZ31B magnesium alloy ». 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) Canadian Institute of Mining Metallurgy & Petroleum
X. Cao, M. Jahazi, H. Al-Kazzaz, M. Medraj. 2008 « Modelling of work-hardening behaviour for laser welded magnesium alloy ». International Journal of Materials Research vol. 99 , nº 2. p. 216-221
X. Cao, M. Jahazi, J. Fournier, M. Alain. 2008 « Optimization of bead spacing during laser cladding of ZE41A-T5 magnesium alloy castings ». Journal of Materials Processing Technology vol. 205 , nº 1–3. p. 322-331
X. Cao, B. Rivaux, M. C. Jahazi, J. Cuddy, A. Birur. 2008 « Effect of joint gap on Inconel 718 alloy quality welded using 4 kW continuous wave ND:YAG laser ». 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) Canadian Institute of Mining Metallurgy & Petroleum
X. Cao, M. Xiao, M. Jahazi, J. Fournier, M. Alain. 2008 « Optimization of processing parameters during laser cladding of ZE41A-T5 magnesium alloy castings using Taguchi method ». Materials and Manufacturing Processes vol. 23 , nº 4. p. 413-418
Jean-François Chatelain, Réjean Roy, René Mayer. 2008 « Development of a spiral trajectory for high speed roughing of light alloy aerospace components ». WSEAS Transactions on Applied and Theoretical Mechanics vol. 3 , nº 3. p. 83-93
F. Demoly, S. Gomes, B. Eynard, Louis Rivest, J.-C. Sagot. 2008 « Towards a collaborative DFA approach based on PLM ». 2nd CIRP Conference on Assembly Technologies & Systems (CATS) (Toronto, ON, Canada, Sept. 21-23, 2008)
L. Dubourg, R. Amargier, M. Jahazi. 2008 « Relationship between FSW parameters, hardness and tensile properties of 7075-T6 and 2098-T851 similar but welds ». 7th International Symposium on Friction Stir Welding : 20-22 May 2008, Japan (Awaji Island, Japan, May 20-22, 2008) TWI Ltd
L. Dubourg, A. Merati, M. Gallant, M. Jahazi. 2008 « Manufacturing of aircraft panels by friction stir lap welding of 7075-T6 stringers on 2024-T3 skin: process optimization and mechanical properties ». 7th International Symposium on Friction Stir Welding : 20-22 May 2008, Japan (Awaji Island, Japan, May 20-22, 2008) TWI Ltd
M.A. El Hani, Louis Rivest, C. Fortin. 2008 « Propagating engineering changes to manufacturing process planning: does PLM meet the need? ». 4th International Conference on Product Lifecycle Management (PLM) (Milan, Italy, July 11-13, 2007) Inderscience Enterprises Limited
F. Gemme, Y. Verreman, L. Dubourg, M. Jahazi. 2008 « Friction stir welding of 7075 aluminium alloy : finite element modelling of the dwell phase ». 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) Canadian Institute of Mining Metallurgy & Petroleum
L. Germain, N. Gey, M. Humbert, P. Vo, M. Jahazi, Philippe Bocher. 2008 « Texture heterogeneities induced by subtransus processing of near alpha titanium alloys ». Acta Materialia vol. 56 , nº 16. p. 4298-4308
J. Gholipour, M. Jahazi. 2008 « Evaluation of lubricants in hydroforming of aerospace materials ». Plasticity 2008 (Kailua-Kona, HI, USA, Jan. 2-5, 2008)
Stéphane Hallé, Sylvie Nadeau. 2008 « Vers l'intégration de connaissances en santé et en sécurité du travail en formation universitaire (génie mécanique): une collaboration unique ». Communication lors de la conférence : Séminaire de la communauté de pratique ValoRIST (Valorisation de la recherche de l'innovation sociale et de la technologie) (Montréal, QC, Canada, 22 fév. 2008)
Stéphane Hallé, Sylvie Nadeau, Diane Rodier. 2008 « L'intégration de connaissances en santé et sécurité du travail en formation universitaire : Le cas du génie mécanique au Québec ». Hygiène et Sécurité du Travail vol. 210. p. 59-63
Lofti Harrabi, Patricia Dolez, Toan Vu-Khanh, Jaime Lara, Guy Tremblay, Sylvie Nadeau, Christian Larivière. 2008 « Characterization of protective gloves stiffness: development of a multidirectional deformation test method ». Safety Science vol. 46 , nº 7. p. 1025-1036
R. Khettabi, Victor Songmene, Jacques Masounave, Imed Zaghbani. 2008 « Understanding the formation of nano and micro particles during metal cutting ». International Journal of Systems Signal Control and Engineering Applications vol. 1 , nº 3. p. 203-210
R. Khettabi, Imed Zaghbani, Victor Songmene, Jacques Masounave. 2008 « Identification et prédiction des fines poussières lors de l'usinage ». In Encyclopédie de la recherche sur l’aluminium au Québec. p. 56. Les Presses de l'aluminium PRAL
Riad Khettabi, Victor Songmene, Jacques Masounave. 2008 « Influence des angles de coupe sur l'émission de poussières ». 2e Sommet Québec-Aquitaine-Midi-Pyrénées sur l'Usinage Haute Performance : Colloque sur l'Usinage à Sec (Montréal, QC, Canada, 3-5 mars 2008)
I. Khmelevskaya, S. Prokoshkin, Vladimir Brailovski, K. Inaekyan, V. Demers, I. Gurtovaya, A. Korotitskiy, S. Dobatkin. 2008 « Functional properties of Ti-Ni-based shape memory alloys ». State-of-the-art Research and Application of SMAs Technologies (Acireale, Sicily, Italy, June 8-13, 2008) Trans Tech Publications Ltd
G. Kientzy, Imed Zaghbani, Victor Songmene. 2008 « Usinabilité et aspects économiques de l'usinage à sec et de l'usinage lubrifié ». In Encyclopédie de la recherche sur l’aluminium au Québec . p. 54. Les Presses de l'aluminium PRAL
D. Lévesque, L. Dubourg, M. Lord, M. Jahazi, A. Blouin. 2008 « Residual stress measurement in friction stir welds using laser ultrasonics ». Review of Progress in Quantitative Nondestructive Evaluation: Proceedings of the 35th Annual Review of Progress in Quantitative Nondestructive Evaluation (Chicago, IL, USA, July 22-25, 2008) AIP Publishing
D. Lévesque, L. Dubourg, C. Mandache, P. Gougeon, X. Cao, M. C. Jahazi. 2008 « Assessment of friction stir welds with nondestructive methods ». 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) Canadian Institute of Mining Metallurgy & Petroleum
Catalin Mandache, Laurent Dubourg, Ali Merati, Mohammad Jahazi. 2008 « Pulsed eddy current testing of friction stir welds ». Materials Evaluation vol. 66 , nº 4. p. 382-387
Caroline Mary, Mohammad Jahazi. 2008 « Multi-scale analysis of IN-718 microstructure evolution during linear friction welding ». Advanced Engineering Materials vol. 10 , nº 6. p. 573-578
E. Mbou, Victor Songmene. 2008 « Amélioration de la qualité et de la productivité de fraisage par le contrôle des conditions de coupe ». In Encyclopédie de la recherche sur l’aluminium au Québec. p. 55. Les Presses de l'aluminium, PRAL
Sylvie Nadeau. 2008 « Gestion des risques: comment intégrer la gestion des risques de santé et de sécurité du travail aux risques opérationnels ». Communication lors de la conférence : MBA UQAT 2008, Lasarre (Lasarre, QC, Canada, 21 mai 2008)
Sylvie Nadeau. 2008 « Gestion des risques: comment intégrer la gestion des risques de santé et de sécurité du travail aux risques opérationnels ». Communication lors de la conférence : MBA UQAT 2008, Rouyn-Noranda (Rouyn-Noranda, QC, Canada, 17 nov. 2008)
Sylvie Nadeau. 2008 « Integrating occupational health and safety to operational risks management : a significant challenge and organizational culture ». 40th Annual Conference of the Nordic Ergonomics Society (NES) (Reykjavik, Iceland, Aug. 11-13, 2008) Icelandic Ergonomics Society
Sylvie Nadeau, Hakim Bouzid, David Prud’homme. 2008 « Étude du mécanisme lésionnel de la hernie discale : modélisation du comportement élastique non linéaire ». Revue Internationale sur l'Ingénierie des Risques Industriels vol. 1 , nº 1. p. 46-64
Sylvie Nadeau, B. Julien, Jean Arteau. 2008 « When system reliability techniques are used to audit manufacturing suppliers in occupational health and safety ». Buletinul Institutului Politehnic Din Iasi vol. LIV (LVIII) , nº fasc. 3-4. p. 55-61
S. D. Prokoshkin, Vladimir Brailovski, K. E. Inaekyan, V. Demers, I. Yu Khmelevskaya, S. V. Dobatkin, E. V. Tatyanin. 2008 « Structure and properties of severely cold-rolled and annealed Ti-Ni shape memory alloys ». Materials Science and Engineering: A vol. 481-482. p. 114-118
R. Roy, Jean-François Chatelain, R. Mayer, S. Chalut, S. Engin. 2008 « Optimization of adaptive spiral toolpaths for pocket machining ». International Computer Aided Design Conference and Exhibition (CAD) (Orlando, FL, USA, June 23-27, 2008)
R. Roy, Jean-François Chatelain, R. Mayer, S. Chalut, S. Engin. 2008 « Programming of a machining procedure for adaptive spiral cutting trajectories ». 10th WSEAS International Conference on Automatic Control, Modelling and Simulation (ACMOS) (Istanbul, Turkey, May 27-30, 2008) World Scientific and Engineering Academy and Society (WSEAS)
Victor Songmene, B. Balout, Jacques Masounave. 2008 « Clean machining : experimental investigation on dust formation : Part II : influence of machining strategies and drill condition ». International Journal of Environmentally Conscious Design & Manufacturing vol. 14 , nº 1. p. 17-33
Victor Songmene, B. Balout, Jacques Masounave. 2008 « Clean machining: experimental investigation on dust formation - Part I: influence of machining parameters and chip formation ». International Journal of Environmentally Conscious Design & Manufacturing vol. 14 , nº 1. p. 1-16
Victor Songmene, Jacques Masounave, R. Khettabi. 2008 « L'émission de poussières pendant l'usinage à sec : une synthèse ». 2e Sommet Québec-Aquitaine-Midi-Pyrénées sur l'Usinage Haute Performance : Colloque sur l'Usinage à Sec (Montréal, QC, Canada, 3-5 mars 2008)
S. St-Martin, Jean-François Chatelain, R. Mayer, S. Engin, S. Chalut. 2008 « Simulation de l'usinage de finition des parois minces de composantes aéronautiques en alliage léger ». Colloque sur la Recherche en Conception Assistée par Ordinateur (CAO) au Québec (Trois-Rivières, QC, Canada, 14 mai 2008)
Serge St-Martin, Jean-François Chatelain, René Mayer, Serafettin Engin, Stéphane Chalut. 2008 « Time domain simulation of thin wall surface finish machining for light alloy aerospace components ». Canadian Society for Mechanical Engineering Forum (CSME) (Ottawa, ON, Canada, June 5-8, 2008)
A. Szymanski, J. Masounave, M. Viens, J. Litwin. 2008 « Émission de poussière par frottement ». Colloque USIFORME 2007 (Montréal, QC, Canada, 3-5 mars 2008)
P. Vo, M. Jahazi, S. Yue. 2008 « Recrystallization during thermomechanical processing of IMI834 ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 39 , nº 12. p. 2965-2980
X. Wang, M. Jahazi, S. Yue. 2008 « Investigation of α platelet boundaries in a near-α titanium alloy ». Materials Science and Engineering: A vol. 492 , nº 1–2. p. 450-454
P. Wanjara, M. Jahazi. 2008 « Assessing mechanical property gradients associated with microstructural changes in stainless steel weldments by shear punch testing ». International Symposium on Recent Developments in Advanced High Strength Steels Processing 2008 : Held at the 47th Conference of Metallurgists (COM) 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) Canadian Institute of Mining Metallurgy & Petroleum
P. Wanjara, M. Jahazi. 2008 « Characterization of electron beam welded 17-4 ph stainless steel ». Canadian Metallurgical Quarterly vol. 47 , nº 4. p. 413-436
P. Wanjara, E. Poirier, M. C. Jahazi. 2008 « Manufacture of a strut on a captive trajectory system by electron beam welding ». 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) Canadian Institute of Mining Metallurgy & Petroleum
Imed Zaghbani, R. Khettabi, Victor Songmene. 2008 « Base de données environnementales pour les alliages d'aluminium ». In Encyclopédie de la recherche sur l’aluminium au Québec. p. 1. Les Presses de l'aluminium PRAL

N. Afrin, D. L. Chen, X. Cao, M. Jahazi. 2007 « Influence of friction stir welding on the tensile behaviour of AZ31B magnesium alloy ». Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007) Canadian Institute of Mining, Metallurgy and Petroleum
N. Afrin, D. L. Chen, X. Cao, M. Jahazi. 2007 « Strain hardening behavior of a friction stir welded magnesium alloy ». Scripta Materialia vol. 57 , nº 11. p. 1004-1007
Paul Alexandru, Sylvie Nadeau. 2007 « Considerations of integration of the risks of work using the diagram of flow ». 6e Congrès International de Sciences des Matériaux et d’Ingénierie (Iasi, Roumania, May 24-27, 2007)
Paul Alexandru, Sylvie Nadeau. 2007 « Integration of operational, health and safety risks using flow diagrams ». Buletinul Institutului Politehnic Din Iasi vol. LIII (LVII) , nº fasc. 3. p. 35-42
B. Balout, Victor Songmene, Jacques Masounave. 2007 « An experimental study of dust generation during dry drilling of pre-cooled and pre-heated workpiece materials ». Journal of Manufacturing Processes vol. 9 , nº 1. p. 23-34
M. Ben Salah, Jean-François Chatelain. 2007 « Part localization algorithm based on constrained alignment of surface patches ». Proceedings - 13th ISSAT International Conference on Reliability and Quality in Design (Seattle, WA, USA, Aug. 2-4, 2007) International Society of Science and Applied Technologies
N. Boutana, Philippe Bocher, M. Jahazi, D. Piot, F. Motheillet. 2007 « Microstructural modeling of cold creep/fatigue in near alpha titanium alloys using cellular automata method ». Proceedings of TI-2007, 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007) Minerals, Metals and Materials Society
Vladimir Brailovski, S. D. Prokoshkin, E. Bastarash, V. Demers, K. E. Inaekyan, I. Yu Khmelevskaya. 2007 « Thermal stability and nanocrystallization of amorphous Ti-Ni alloys prepared by cold rolling and post-deformation annealing ». THERMEC 2006 Trans Tech Publications Ltd
A. Brière-Côté, Louis Rivest, A. Desrochers. 2007 « Évolution de la structure d'un produit sur son cycle de vie dans un environnement hétérogène d'adaptation de produit à la demande ». Communication lors de la conférence : 75e Congrés de l'ACFAS (Trois-Rivières, QC, Canada, 7-11 mai 2007)
X. Cao, M. Jahazi. 2007 « Applications of laser welding and friction stir welding technologies for joining aerospace magnesium alloys ». LMT 2007 : proceedings of the Third International Conference on Light Metals Technology : September 24-26, 2007, Saint-Sauveur, Québec, Canada (Saint-Sauveur, QC, Canada, Sept. 24-26, 2007) National Research Council Canada = Conseil national de recherches Canada
X. Cao, M. Jahazi. 2007 « Friction stir processing of sand-cast aerospace magnesium alloy Ze41A-T5 ». Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007) Canadian Institute of Mining, Metallurgy and Petroleum
X. Cao, M. Jahazi, M. Guerin, R. S. Mishra. 2007 « Friction stir welding of an aerospace magnesium alloy ». Friction Stir Welding and Processing IV (Orlando, FL, USA, Feb. 25-Mar. 1, 2007) The Minerals, Metals & Materials Society
Xinjin Cao, Mohammad Jahazi. 2007 « New analyses of pressure filtration curves of Al alloys: a case study ». THERMEC 2006 Supplement - 5th International Conference on Processing and Manufacturing of Advanced Materials (Vancouver, BC, Canada, July 4-8, 2006) Trans Tech Publications Ltd
E. Charlot, Jean Pierre Kenné, Sylvie Nadeau. 2007 « Optimal production, maintenance and lockout/tagout control policies in manufacturing systems ». International Journal of Production Economics vol. 107 , nº 2. p. 435-450
E. Coman, L. Dubourg, M. Jahazi, K. Ghosh. 2007 « A study of the deformation and residual stresses in an aircraft fuselage panel joined by friction stir welding ». Proceedings of the 23rd ISPE Internaional Conference on CAD/CAM Robotics and Factories of the Future -CARS & FOF'07 (Bogota, Colombia, Aug. 16-18, 2007) Universidad Militar Nueva Granada
V. Demers, V. Brailovski, S. Prokoshkin, K. Inaekyan, E. Bastarash, I. Khmelevskaya, S. Dobatkin. 2007 « Functional properties of nanostructured Ti-50.0 at % Ni alloys ». Fatigue and Fracture of Medical Metallic Materials and Devices (Dallas, TX, USA, Nov. 01, 2005) American Society for Testing and Materials
Félicia Etsida Mpiga, Thien-My Dao, Victor Songmene. 2007 « The hybrid simulation approach based on RSM and ants colony system for multiobjective optimization problem ». Proceedings of the 8th Asia Pacific Industrial Engineering & Management System and Chinese Institute of Industrial Engineers Conference (Kaohsiung, Taïwan, Dec. 9-12, 2007) APIEM & CIIE
M. Fairman, N. Afrin, D. L. Chen, X. Cao, M. Jahazi. 2007 « Microstructural and microhardness evolution of friction stir processing AZ31B-H24 magnesium alloy ». Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007) Canadian Institute of Mining, Metallurgy and Petroleum
M. Fairman, N. Afrin, D. L. Chen, X. Cao, M. Jahazi. 2007 « Microstructural evaluation of friction stir processed AZ31B-H24 magnesium alloy ». Canadian Metallurgical Quarterly vol. 46 , nº 4. p. 425-432
Lionel Germain, Phuong Vo, Nathalie Gey, Mohammad Jahazi, Michel Humbert, Philippe Bocher. 2007 « Development of sharp local α microtextures during α/β thermo-mechanical processing of TIMETAL 834 ». 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007) Minerals, Metals and Materials Society
R. Khettabi, Victor Songmene, Jacques Masounave. 2007 « Effect of tool lead angle and chip formation mode on dust emission in dry cutting ». Journal of Materials Processing Technology vol. 194 , nº 1-3. p. 100-109
R. Khettabi, Victor Songmene, Jacques Masounave. 2007 « Modeling of fine dust during machining ». Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings (Montreal, QC, Canada, Dec. 17-19, 2007) École de technologie supérieure
Bruno Lamarche, Louis Rivest. 2007 « Achieving a dynamic product model with inter-features associations ». 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montreal, Canada, June 11-13, 2007) École de technologie supérieure
Bruno Lamarche, Louis Rivest. 2007 « Dynamic product modeling with inter-features associations: comparing customization and automation ». International Computer Aided Design Conference and Exhibition (CAD) (Honolulu, HI, USA, June 25-29, 2007)
Bruno Lamarche, Louis Rivest. 2007 « Dynamic product modeling with inter-features associations: Comparing customization and automation ». Computer-Aided Design and Applications vol. 4 , nº 6. p. 877-886
D. Levesque, L. Dubourg, C. Mandache, S. E. Kruger, M. Lord, A. Merati, M. Jahazi, J-P. Monchalin. 2007 « Synthetic aperture focusing technique for the ultrasonic evaluation of friction stir welds ». Review of Progresses in Quantitative Nondestructive Evaluation : 34th Annual Review of Progress in Quantitative Nondestructive Evaluation (Golden, CO, USA, July 22-27, 2007) AIP Publishing
A. Liu, D. L. Chen, S. Bhole, X. Cao, M. Jahazi. 2007 « Corrosion behavior of the stir zone in friction stir welded dissimilar joint of 2024 aluminium to AZ31 magnesium alloys ». Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007) Canadian Institute of Mining, Metallurgy and Petroleum
C. Mandache, A. Merati, L. Dubourg, M. Jahazi. 2007 « Pulsed Eddy Current Inspection of friction stir welded components ». ASNT fall conference and quality testing show 2007 (Las Vegas, NV, USA, Nov. 12-16, 2007) ASNT
M. Mansour, Sylvie Nadeau, Jean-Pierre Kenné. 2007 « Sécurité des convoyeurs et intégration du cadenassage sur une ligne de production ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels (Montréal, QC, Canada, 15 nov. 2007)
Roland Maranzana, Omar Msaaf, Louis Rivest. 2007 « Interprétation des modèles géométriques 3D : application à la recherche de pièces et à la comparaison de leurs représentations géométriques ». Communication lors de la conférence : 75e Congrès de l'Association Francophone pour le Savoir (ACFAS) (Trois-Rivières, QC, Canada, 7-11 mai 2007)
C. Mary, M. Jahazi. 2007 « Linear friction welding of IN-718 process optimization and microstructure evolution ». THERMEC 2006 Supplement - 5th International Conference on Processing and Manufacturing of Advanced Materials (Vancouver, BC, Canada, July 4-8, 2006) Trans Tech Publications
Omar Msaaf, Roland Maranzana, Louis Rivest. 2007 « Part data mining for information re-use in a PLM context ». ASME Turbo Expo 2007: Power for Land, Sea, and Air (Montreal, QC, Canada, May 14-17, 2007) American Society of Mechanical Engineers
Sylvie Nadeau. 2007 « Gestion des risques : comment intégrer la gestion des risques de santé et de sécurité du travail aux risques opérationnels ». Communication lors de la conférence : MBA UQAT 2007, Rouyn-Noranda (Rouyn-Noranda, QC, Canada, 19 oct. 2007)
Sylvie Nadeau, Hakim Bouzid, D. Prud'Homme. 2007 « Étude du mécanisme lésionnel de la hernie discale : modélisation du comportement élastique non linéaire ». Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings (Montréal, QC, Canada, 17-19 déc. 2007) École de technologie supérieure
Sylvie Nadeau, Stéphane Hallé. 2007 « La prise en charge de la santé et de la sécurité du travail par les ingénieurs industriels – une obligation professionnelle ». Communication lors de la conférence : Congrès National de la Société Canadienne de Génie Industriel (Montréal, QC, Canada, 11-13 jan. 2007)
Sylvie Nadeau, Stéphane Hallé, S. Déry, P. Doucet, R. Gilbert, L. Gratton, Anh Dung Ngô, Jean Arteau, Hakim Bouzid, J. Brousseau, J. Dessureault, F. Gauthier, Frédéric Laville, P. Le-Huy, Françoise Marchand, Yvan Petit, D. Rodier, Marc Thomas. 2007 « Vers l'intégration de connaissances en santé et sécurité du travail en formation universitaire (génie mécanique) - une collaboration unique ». 24e Congrès de l’Association Internationale de Pédagogie Universitaire (AIPU) (Montréal, QC, Canada, 16-18 mai 2007) Association Internationale de Pédagogie Universitaire (AIPU)
Anh Dung Ngô, Stéphane Hallé, Sylvie Nadeau, P. Déry, P. Doucet, R. Gilbert, L. Gratton, Jean Arteau, Hakim Bouzid, J. Brousseau, P. Dessureault, F. Gauthier, Frédéric Laville, P. Le Huy, Françoise Marchand, Yvan Petit, D. Rodier, Marc Thomas. 2007 « Le défi de l'intégration des connaissances en santé et en sécurité du travail - génie mécanique ». Travail et Santé vol. 23 , nº 4. p. 36-39
Luc Parent, Victor Songmene, Jean Pierre Kenné. 2007 « A generalised model for optimising an end milling operation ». Production Planning and Control vol. 18 , nº 4. p. 319-337
B. Salah, Jean-François Chatelain. 2007 « Part localization based on a surface patch alignment algorithm ». 2e Congrès International en Conception et Modélisation des Systèmes Mécaniques (CMSM) (Monastir, Tunisia, Mar. 19-21, 2007)
Victor Songmene. 2007 « Usinage propre et concurrentiel ». Communication lors de la conférence : Conférence Scientifique sur la Sécurité des Travailleurs et le Contrôle des Risques Industriels (Montréal, QC, Canada, 2007)
Victor Songmene, Jacques Masounave, R. Khettabi. 2007 « Dry machining and its effects on productivity, costs, environment and machine-shop air quality ». 1st International Conference on Sustainable Manufacturing (Montreal, QC, Canada, Oct. 17-18, 2007)
Victor Songmene, Jacques Masounave, R. Khettabi. 2007 « Safe, environmentally-friendly and cost effective machining ». Safety Health and Environmental World Congress (SHEWC) (Santos, Brazil, July 22-25, 2007)
A. Szymanski, J. Masounave, M. Viens. 2007 « Les différentes sources d’émission de particules fines et ultrafines dans l’air ». Premier congrès international sur l'ingénierie des risques industriels : CIRI 2007 : Montréal (Québec) Canada, 17-18 et 19 décembre 2007 : actes (Montréal, QC, Canada, 17-19 déc. 2007) École de technologie supérieure
Guy Tremblay, C. Larivière, Sylvie Nadeau, Lofti Harrabi, Patricia Dolez, Toan Vu-Khanh, J. Lara. 2007 « Caractérisation de la souplesse des gants de protection par une méthode biomécanique basée sur l’électromyographie de surface : étude de validation ». Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings (Montréal, QC, Canada, 17-19 déc. 2007) École de technologie supérieure
E. Uta, M. Humbert, N. Gey, A. Hazotte, Philippe Bocher, M. Jahazi. 2007 « Description and characterisation of texture heterogeneitites in titanium alloy Timetal 834 with a bimodal microstructure ». 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007) Minerals, Metals and Materials Society
P. Vo, M. Jahazi, S. Yue. 2007 « Recrystallization during Alpha + Beta Processing of IMI834 ». Proceedings of TI-2007, 11th World Conference on Titanium (Kyoto, Japan, June 1-5, 2007) Minerals, Metals and Materials Society
P. Vo, M. Jahazi, S. Yue. 2007 « Recrystallization during beta working of IMI834 ». THERMEC 2006 Supplement - 5th International Conference on Processing and Manufacturing of Advanced Materials (Vancouver, BC, Canada, July 4-8, 2006) Trans Tech Publications
Phuong Vo, M. Jahazi, S. Yue, Philippe Bocher. 2007 « Flow stress prediction during hot working of near-alpha titanium alloys ». Materials Science and Engineering: A vol. 447 , nº 1-2. p. 99-110
Toan Vu-Khanh, Patricia Dolez, L Harrabi, J Lara, C Larivière, G Tremblay, Sylvie Nadeau. 2007 « Caractérisation de la souplesse des gants de protection par des méthodes mécaniques et une méthode biomécanique basée sur l'électromyographie de surface ». Montréal : Institut de recherche Robert-Sauvé en santé et en sécurité du travail du Québec. 85 p.
X. Wang, P. Vo, M. Jahazi, S. Yue. 2007 « Dwell fatigue microstructure in a near-α titanium alloy ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 38 , nº 4. p. 831-839
P. Wanjara, M. Brochu, M. Jahazi. 2007 « Electron beam freeform fabrication on stainless steel ». THERMEC 2006 (Vancouver, B.C, Canada, July 4-8, 2006) Trans Tech Publications
P. Wanjara, M. Brochu, M. Jahazi. 2007 « Electron beam freeforming of stainless steel using solid wire feed ». Materials and Design vol. 28 , nº 8. p. 2278-2286
M. Xiao, C. Poon, P. Wanjara, M. Jahazi, Z. Fawaz, P. Krimbalis. 2007 « Optimization of Nd-YAG laser welding process for Inconel 718 alloy ». Progress in Light Metals, Aerospace Materials and Superconductors (Beijing, China, June 25-30, 2006) Trans Tech Publications
Cao Xinjin, Xiao Min, M. Jahazi, T. Shariff. 2007 « Evolution of microstructures during laser surface cladding of magnesium alloy castings using welding wire ». THERMEC 2006 - Proceedings of the 5th International Conference on Processing and Manufacturing of Advanced Materials Trans Tech Publications
Imed Zaghbani, Victor Songmene, R. Khettabi. 2007 « A simplified numerical model for orthogonal cutting ». 1st International Conference on Sustainable Manufacturing (Montreal, QC, Canada, Oct. 17-18, 2007)
Imed Zaghbani, Victor Songmene, R. Khettabi. 2007 « Modeling of thin wall-parts deflection during high speed milling ». 1st International Conference on Sustainable Manufacturing (Montreal, QC, Canada, Oct. 17-18, 2007)

H. Al-Kazzaz, M. Medraj, X. Cao, M. Xiao, M. Jahazi. 2006 « Effect of laser power and joint gap on weld quality of aerospace grade ZE41A-T5 magnesium alloy using Nd:YAG laser ». Magnesium technology in the global age : proceedings of the International Symposium on Magnesium Technology in the Global Age, October 1-4, 2006, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 1-4, 2006) Canadian Institute of Mining, Metallurgy and Petroleum
Bahaa Balout, Victor Songmene, Jacques Masounave. 2006 « Usinabilité d'alliages légers et des composites lors du perçage à sec ». Transactions of the Canadian Society for Mechanical Engineering vol. 30 , nº 3. p. 329-343
Nadjib Bouikni, Alain Desrochers, Louis Rivest. 2006 « A product feature evolution validation model for engineering change management ». Journal of Computing and Information Science in Engineering vol. 6 , nº 2. p. 188-195
Nabil Boutana, Philippe Bocher, Mohammad Jahazi, D. Piot, F. Montheillet. 2006 « Utilisation des automates cellulaires pour étudier le comportement en fatigue-fluage des alliages de titane ». Matériaux 2006 (Dijon, France, 13-17 nov. 2006)
Vladimir Brailovski, S. D. Prokoshkin, I. Yu Khmelevskaya, K. E. Inaekyan, V. Demers, E. Bastarache, S. V. Dobatkin, E. V. Tatyanin. 2006 « Interrelations between the properties and structure of thermomechanically-treated equiatomic Ti-Ni alloy ». Materials Science and Engineering: A vol. 438-440. p. 597-601
Vladimir Brailovski, Sergui D. Prokoshkin, Irina Yu. Khmelevskaya, Karine E. Inaekyan, Vincent Demers, Sergui V. Dobatkin, Evgeny V. Tatyanin. 2006 « Structure and properties of the Ti–50.0 at%Ni alloy after strain hardening and nanocrystallizing thermomechanical processing ». Materials Transactions vol. 47 , nº 3. p. 795-804
X. Cao, M. Jahazi, J. P. Immarigeon, W. Wallace. 2006 « A review of laser welding techniques for magnesium alloys ». Journal of Materials Processing Technology vol. 171 , nº 2. p. 188-204
X. Cao, M. Jahazi, R. Mehta. 2006 « Friction stir welding of AZ31B-H24 magnesium alloy butt joints ». 6th International Friction Stir Welding Symposium 2006 (Saint-Sauveur, QC, Canada, Oct. 10-13, 2006) TWI Ltd
X. Cao, M. Xiao, M. Jahazi. 2006 « Effect of processing parameters on laser cladding of magnesium alloy castings ». Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006) Canadian Institute of Mining, Metallurgy and Petroleum
X. Cao, M. Xiao, M. Jahazi, T. Shariff. 2006 « Surface cladding of magnesium alloy castings using Nd:YAG laser ». Magnesium technology 2006 : proceedings of the symposium held during the TMS 2006 annual meeting in San Antonio, Texas, USA, March 12-16, 2006 (San Antonio, TX, USA, Mar. 12-16, 2006) The Minerals, Metals & Materials Society
E. Charlot, Sylvie Nadeau, Jean-Pierre Kenné. 2006 « Impact du contrôle du cadenassage sur les risques d'accidents et les coûts de production ». Travail et Santé vol. 22 , nº 3. p. 48-52
V. Demers, Vladimir Brailovski, S. Prokoshkin, K. Inaekyan, E. Bastarash, I. Khmelevskaya, S. Dobatkin. 2006 « Functional properties of nanostructured Ti-50.0 at % Ni alloys ». Journal of ASTM International vol. 3 , nº 6
L. Dubourg, F. O. Gagnon, F. Nadeau, L. St-Georges, M. Jahazi. 2006 « Process window optimization for FSW of thin and thick sheet Al alloys using statistical methods ». 6th International Friction Stir Welding Symposium 2006 (Saint-Sauveur, QC, Canada, Oct. 10-13, 2006) TWI
L. Dubourg, M. Jahazi, G. Dezaise, P. Bocher. 2006 « Microstructure and mechanical characterisation of FSW 7075-T6 lap joints ». Aerospace Materials and Manufacturing: Emerging Materials, Processes, and Repair Techniques (Montréal, Canada, Oct.1-4, 2006) Canadian Institute of Mining, Metallurgy and Petroleum
M.A. El Hani, Louis Rivest, C. Fortin. 2006 « On specifying an information management tool to support manufacturing process planning in aerospace: a case study ». ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE) (Philadelphia, PA, USA, Sept. 10-13, 2006) American Society of Mechanical Engineers
J. Gholipour, M. Jahazi. 2006 « Effect of lubricant in hydroforming of Ni-based super alloy tubes ». Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006) Canadian Institute of Mining, Metallurgy and Petroleum
Stéphane Hallé, Sylvie Nadeau. 2006 « Intégration de compétence en SST en milieu universitaire – Génie mécanique ». Communication lors de la conférence : Institut de Recherche en Santé et en Sécurité du Travail (IRSST) (Montréal, QC, Canada, 12 sept. 2006)
Michel Humbert, L. Germain, N. Gey, Philippe Bocher, M. Jahazi. 2006 « Study of the variant selection in sharp textured regions of bimodal IMI 834 billet ». Materials Science and Engineering: A vol. 430 , nº 1-2. p. 157-164
F. Jalilian, R. A. L. Drew, M. Jahazi. 2006 « Joining of Inconel 617 sheets using TLP bonding process with Ni-Si-B interlayer ». Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006) Canadian Institute of Mining, Metallurgy and Petroleum
F. Jalilian, M. Jahazi, R. A. L. Drew. 2006 « Microstructural evolution during transient liquid phase bonding of Inconel 617 using Ni-Si-B filler metal ». Materials Science and Engineering: A vol. 423 , nº 1-2. p. 269-281
A. R. Khodabandeh, M. Jahazi, S. Yue, S. T. Aghdashi. 2006 « The determination of optimum forging conditions for the production of high strength-high impact toughness automotive parts ». Materials and Manufacturing Processes vol. 21 , nº 1. p. 105-110
J.P. Michaud, Victor Songmene, Antoine Tahan. 2006 « Aluminium alloy 7050 T7451 thin wall high-speed machining parts study ». 3th International Symposium on Aerospace Materials and Manufacturing Processes: Emerging Materials, Manufacturing, and Repair Techniques (Montreal, QC, Canada, Oct. 2-4, 2006) The Metallurgy and Materials Society
D.R. Njoya, R. Khettabi, Victor Songmene, Jacques Masounave. 2006 « Influence des matériaux et des procédés d'usinage sur les émissions de poussières fines ». 45th International Conference of Metallurgists (Montréal, QC, Canada, Oct. 1-4, 2006) Institut canadien des mines
S. D. Prokoshkin, Vladimir Brailovski, I. Yu Khmelevskaya, S. V. Dobatkin, K. E. Inaekyan, V. Demers, E. Bastarache, E. V. Tatianin. 2006 « Formation of nanocrystalline structure upon severe rolling plastic deformation and annealing and improvement of set of functional properties of Ti-Ni alloys ». Bulletin of the Russian Academy of Sciences : Physics vol. 70 , nº 9. p. 1536-1541
Louis Rivest. 2006 « Drawingless product development process ». Communication lors de la conférence : Consortium for Research and Innovation in Aerospace in Quebec PLM Workshop (CRIAQ) (Longueuil, QC, Canada, Apr. 5, 2006)
Louis Rivest, Omar Msaaf. 2006 « La MNS et son courtier pour une exploitation efficace de la géométrie en MDO ». Communication lors de la conférence : Journée MOSAIC (Montréal, QC, Canada, 31 mai 2006)
K. Soufi, Jean-François Chatelain, Roland Maranzana. 2006 « A product change management system based on active features ». 16th CIRP International Design Seminar, Design & Innovation for Sustainable Society (Kananaskis, AB, Canada, July 16-19, 2006)
T.G. Tremblay, Louis Rivest, O. Msaaf, Roland Maranzana. 2006 « The role of associations in CAD and PLM for handling change propagation during product development ». Leading the Web in concurrent engineering : next generation concurrent engineering (Antibes, France, Sept. 18-21, 2006) IOS Press
E. Uta, M. Humbert, N. Gey, P. Bocher, M. Jahazi. 2006 « Mise en évidence et caractérisation des hétérogénéités de textures dans l'alliage de titane IMI 834 de microstructure bimodale à vocation aéronautique ». Materiaux 2006 : Dijon, 13-17 Novembre 2006 : [recueil de la conference sur CD-ROM] (Dijon, France, 13-17 nov. 2006) Université de Bourgogne
P. Vo, S. Yue, M. Jahazi. 2006 « Microstructure development of a near alpha-titanium alloy during high temperature deformation ». Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006) Canadian Institute of Mining, Metallurgy and Petroleum
X. Wang, M. Jahazi, S. Yue. 2006 « Substructure of high temperature compressed titanium alloy IMI 834 ». Materials Science and Engineering: A vol. 434 , nº 1-2. p. 188-193
P. Wanjara, M. Brochu, M. Jahazi. 2006 « Thin gauge titanium manufacturing using multiple-pass electron beam welding ». Materials and Manufacturing Processes vol. 21 , nº 5. p. 439-451
Priti Wanjara, M. Jahazi, H. Monajati, S. Yue. 2006 « Influence of thermomechanical processing on microstructural evolution in near- alloy IMI834 ». Materials Science and Engineering: A vol. 416 , nº 1-2. p. 300-311
M. Xiao, P. Wanjara, M. Jahazi, C. Poon. 2006 « Nd:Yag-laser welding of Inconel 718 alloy ». Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006) Canadian Institute of Mining, Metallurgy and Petroleum

H. Al-Kazzaz, M. Medraj, X. Cao, M. Jahazi, X. Min. 2005 « Effect of welding speed on Nd:YAG laser weldability of ZE41A-T5 magnesium sand castings ». Light metals 2005 : proceedings of the International Symposium on Light Metals, August 21-24, 2005, Calgary, Alberta, Canada (Calgary, AB, Canada, Aug. 21-24, 2005) Canadian Institute of Mining, Metallurgy and Petroleum
P. Alexandru, Sylvie Nadeau. 2005 « Intégration des aspects de santé et de sécurité à la gestion des opérations dans le travail autonome et polyvalent en environnement incertain ». La SST: de la pratique à l'intégration-- un défi! : 27e congrès AQHSST, 17, 18, 19 mai 2005, Hôtel des Seigneurs, Saint-Hyacinthe : résumés des conférences (Saint-Hyacinthe, QC, Canada, 17-19 mai, 2005) Association québécoise pour l'hygiène, la santé et la sécurité du travail
Jean Arteau, Sylvie Nadeau, Anh Dung Ngô, Pierre Rivet. 2005 « La santé et la sécurité du travail en milieu universitaire: des choix proactifs ». Colloque la santé et la sécurité du travail au Québec : de la recherche à la pratique : 11 mai 2005 à l'Université du Québec à Chicoutimi dans le cadre du 73e congrès de l'Acfas (Chicoutimi, QC, Canada, 10-15 mai 2005) Réseau de recherche en santé et en sécurité du travail du Québec
P. Bocher, M. Jahazi, L. Germain, N. Gey, M. Humbert. 2005 « Variant selection in forged titanium alloys : effect of microscopic grain misorientations on the formation of macroscopic regions with similar crystallographic orientations ». Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, QC, Canada, Aug. 1-4, 2005) École de technologie supérieure
Philippe Bocher, Mohammad Jahazi, Lionel Germain, Priti Wanjara, Nathalie Gey, Michel Humbert. 2005 « β Microtexture analysis in correlation with hcp textured regions observed in a forged near alpha titanium alloy ». Solid State Phenomena vol. 105. p. 127-132
N. Boutana, P. Bocher, M. Jahazi, J. Savoie, D. Piot, F. Montheillet. 2005 « Modelling mechanical behaviour of heterogeneous materials using cellular automata : application to some forged titanium alloys ». Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, QC, Canada, Aug. 1-4, 2005) École de technologie supérieure
X. Cao, M. Jahazi. 2005 « Estimation of resistance of filter media used for Prefil Footprinter tests of liquid aluminium alloys ». Materials Science and Technology vol. 21 , nº 10. p. 1192-1198
X. Cao, M. Jahazi. 2005 « Examination and verification of the filtration mechanism of cake mode during the pressure filtration tests of liquid Al–Si cast alloys ». Materials Science and Engineering: A vol. 408 , nº 1–2. p. 234-242
X. Cao, M. Xiao, M. Jahazi, J. P. Immarigeon. 2005 « Continuous wave ND:YAG laser welding of sand-cast ZE41A-T5 magnesium alloys ». Materials and Manufacturing Processes vol. 20 , nº 6. p. 987-1004
X. Cao, M. Xiao, M. Jahazi, Y. L. Lin. 2005 « Nd:YAG laser welding of magnesium alloy castings ». Magnesium Technology 2005: Proceedings of the Symposium Held During the 2005 TMS Annual Meeting in San Francisco, California, U.S.A., February 13-17, 2005 (San Francisco, CA, USA, Feb. 13-17, 2005) The Minerals, Metals & Materials Society
E. Charlot, Jean-Pierre Kenné, Sylvie Nadeau. 2005 « Optimal production and lockout/tagout control policies in manufacturing systems ». 4th International Conference Safety of Industrial Automated Systems (SIAS) (Chicago, IL, USA, Sept. 26-28, 2005)
Jean-François Chatelain. 2005 « A level-based optimization algorithm for complex part localization ». Precision Engineering vol. 29 , nº 2. p. 197–207
L. Germain, N. Gey, M. Humbert, P. Bocher, M. Jahazi. 2005 « β→-αs variant selection in sharp hcp textured regions of a bimodal IMI834 billet ». Proceedings of the 14th International Conference on Textures of Materials (Leuven, Belgium, July 11-15, 2005) Trans Tech Publications
L. Germain, N. Gey, M. Humbert, A. Hazotte, P. Bocher, M. Jahazi. 2005 « An automated method to analyze separately the microtextures of primary αp grains and the secondary αs inherited colonies in bimodal titanium alloys ». Materials Characterization vol. 54 , nº 3. p. 216-222
Lionel Germain, Nathalie Gey, Ludovic Humbert, Philippe Bocher, Mohammad Jahazi. 2005 « Analysis of sharp microtexture heterogeneities in a bimodal IMI 834 billet ». Acta Materialia vol. 53 , nº 13. p. 3535-3543
K. E. Inaekyan, S. D. Prokoshkin, V. Brailovski, I. Yu. Khmelevskaya, V. Demers, S. V. Dobatkin, E. V. Tatyanin, E. Bastarache. 2005 « Substructure and nanocrystalline structure effects in thermomechanically treated Ti-Ni alloys ». Nanomaterials by Severe Plastic Deformation (Fukuoka, Japan, Sept. 22-26, 2005) Trans Tech Publications Ltd
F. Jalilian, R. A. L. Drew, M. Jahazi. 2005 « Joining of Inconel 617 sheets in TLP bonding using Ni - P and Ni - Si - B alloys ». Trends in Welding Research - Proceedings of the 7th International Conference (Pine Mountain, GA, USA, May 16-20, 2005) ASM International
B. Julien, Sylvie Nadeau, N. Voyer, Claude Roy. 2005 « The use of logic trees to evaluate corporate performance in ergonomics, health and safety ». Contemporary Ergonomics 2005 (Hatfield, United Kingdom, Apr. 5-7, 2005) Taylor & Francis
Ali Reza Khodabandeh, Mohammad Jahazi, Steve Yue, Philippe Bocher. 2005 « Impact toughness and tensile properties improvement through microstructure control in hot forged Nb-V microalloyed steel ». ISIJ International vol. 45 , nº 2. p. 272-280
H. Monajati, A. K. Taheri, M. Jahazi, S. Yue. 2005 « Deformation characteristics of isothermally forged UDIMET 720 nickel-base superalloy ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 36 , nº 4. p. 895-905
H. Monajati, F. Zarandi, M. Jahazi, S. Yue. 2005 « Strain induced γ′ precipitation in nickel base superalloy Udimet 720 using a stress relaxation based technique ». Scripta Materialia vol. 52 , nº 8. p. 771-776
O. Msaaf, Louis Rivest. 2005 « Le courtage de données numériques structurées : un catalyseur pour l'optimisation multidisciplinaire ». Communication lors de la conférence : 2e Journée MOSAIC (Montréal, QC, Canada, 9 sept. 2005)
Sylvie Nadeau. 2005 « Can ergonomics (and investments in health and safety) be useful in sustaining a competitive advantage? ». Contemporary Ergonomics 2005 (Hertfordshire, United Kingdom, Apr. 5-7, 2005) Taylor & Francis
Xuan-Tan Pham, Phil Bates, Amy Chesney. 2005 « Modeling of thermoforming of low-density glass mat thermoplastic ». Journal of Reinforced Plastics and Composites vol. 24 , nº 3. p. 287-298
S. Prokoshkin, Vladimir Brailovski, I. Khmelevskaya, S. Dobatkin, K. Inaekyan, V. Turilina, V. Demers, E. Tat'yanin. 2005 « Creation of substructure and nanostructure in thermomechanical treatment and control on functional properties of Ti-Ni alloys with shape memory effect ». Metal Science and Heat Treatment vol. 47 , nº 5-6. p. 182-187
T.G. Tremblay, Louis Rivest, Bruno Lamarche, Roland Maranzana. 2005 « Vers une application généralisée du concept de lien technologique en développement de produits : Terminologie des associations ». Communication lors de la conférence : 24e Salon International des Systèmes d'Information, Technologies, Méthodologies et Services pour la Conception, la Fabrication et la Gestion du Cycle de vie Produit (MICAD) (Paris, France, 5-7 avril 2005)
Martin Viens, Z. Wang. 2005 « HBAR-spectroscopy used for materials characterization ». 32nd Annual Review of Process in Quantitative Nondestructive Evaluation (Brunswick, ME, USA, Jul. 31-Aug. 5, 2005) American Institute of Physics
P. Wanjara, C. Booth-Morrison, E. Hsu, M. Jahazi. 2005 « Process optimization for linear friction welding of Ti-6Al-4V ». Trends in welding research : proceedings of the 7th International Conference (Atlanta, GA, USA, May 16-20, 2005) ASM International
P. Wanjara, M. Brochu, S. Girard, M. Jahazi. 2005 « Electron beam freeforming on type 321 stainless steel using BNi-2 brazing paste ». Materials Science and Technology vol. 21 , nº 5. p. 613-618
P. Wanjara, M. Brochu, M. Jahazi. 2005 « Ti–6Al–4V electron beam weld qualification using laser scanning confocal microscopy ». Materials Characterization vol. 54 , nº 3. p. 254-262
P. Wanjara, M. Jahazi. 2005 « Linear friction welding of Ti-6Al-4V: Processing, microstructure, and mechanical-property inter-relationships ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 36 , nº 8. p. 2149-2164
P. Wanjara, M. Jahazi, H. Monajati, S. Yue, J. P. Immarigeon. 2005 « Hot working behavior of near-α alloy IMI834 ». Materials Science and Engineering: A vol. 396 , nº 1–2. p. 50-60
P. Wanjara, H. Monajati, M. Jahazi, L. Germain, P. Bocher, J.-P. Immarigeon. 2005 « Deformation processing mechanism and microstructural evolution in a near-alpha titanium alloy ». Materials science & technology: proceedings of the conference held September 25-28, 2005, Pittsburgh, Pennsylvania USA (Pittsburgh, PA, USA, Sept. 25-28, 2005) Association for Iron and Steel Technology

P. Alexandru, Sylvie Nadeau. 2004 « Modèle interrelationnel pour l'intégration des aspects de santé et de sécurité à la gestion des opérations dans le travail autonome et polyvalent ». Buletinul Institutului Politehnic Din Iasi vol. L (LIV) , nº fasc. 3-4. p. 69-72
B. Antri, Jean-François Chatelain, Françoise Marchand. 2004 « An integrated information model for the dimensional and geometrical inspection of mechanical parts ». 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME) (Bath, UK, Apr. 5-7, 2004) University of Bath
Nadjib Bouikni, Alain Desrochers, Louis Rivest. 2004 « Flux de travaux dynamiques pour la gestion des évolutions des Features du produit ». Conference International de Mécanique Avancée (CIMA) (Boumerdès, Algérie, 30 nov.-2 déc. 2004)
M. Brochu, S. Girard, M. Jahazi. 2004 « Electron beam free forming using brazing paste and solid wires as filler metal ». Aerospace materials and manufacturing : development, testing, and life cycle issues--honoring William Wallace : proceedings of the Second International Symposium on Aerospace Materials and Manufacturing: Development, Testing, and Life Cycle Issues--Honori (Hamilton, ON, Canada, Aug. 22-25, 2004) Canadian Institute of Mining, Metallurgy and Petroleum
J. Brunette, M. Jeu-Herault, Victor Songmene, Jacques Masounave. 2004 « Understanding and characterizing the drilling of recycled plastics ». Machining Science and Technology vol. 8 , nº 1. p. 141-170
X. Cao, M. Xiao, M. Jahazi. 2004 « Continuous wave Nd: YAG laser welding of ZE41 A-T5 magnesium sand castings: conduction or keyhole mode ». Aerospace materials and manufacturing : development, testing, and life cycle issues--honoring William Wallace : proceedings of the Second International Symposium on Aerospace Materials and Manufacturing: Development, Testing, and Life Cycle Issues--Honori (Hamilton, ON, Canada, Aug. 22-25, 2004) Canadian Institute of Mining, Metallurgy and Petroleum
Jean-François Chatelain, Y. Boutin, Françoise Marchand, Antoine Tahan. 2004 « Productivity assessment from advanced integration of canned cycles to CAD/CAM software ». WSEAS Transactions on Systems vol. 3 , nº 3. p. 1187-92
Étienne Fortin, Jean-François Chatelain, Louis Rivest. 2004 « An innovative software architecture to improve information flow from CAM to CNC ». Computers and Industrial Engineering vol. 46 , nº 4. p. 655-667
Étienne Fortin, Louis Rivest, Jean-François Chatelain. 2004 « Combiner de multiple langages pour la programmation des contrôleurs de machines-outils à architecture ouverte ». Transactions of the Canadian Society for Mechanical Engineering vol. 28 , nº 3-4. p. 511-530
M. Jahazi, S. Hossein-Nejad. 2004 « The development of an optimum manufacturing and material selection process for the fabrication of labyrinth seal strips ». Journal of Materials Processing Technology vol. 152 , nº 3. p. 272-275
F. Jalilian, M. Jahazi, R. A. L. Drew, J-P. Immarigeon. 2004 « The influence of processing parameters on TLP joining of Inconel 617 alloy ». 2nd International Symposium on Aerospace Materials and Manufacturing: Development, Testing, and Life Cycle Issues - Honoring William Wallace (Hamilton, ON, Canada, Aug. 22-25, 2004) Canadian Institute of Mining, Metallurgy and Petroleum
B. Julien, Sylvie Nadeau, N. Voyer, C. Roy. 2004 « Dévelopement d'un processus d'audit de la performance d'entreprises manufacturières ». Info-productivité , nº 9. p. 12-13
B. Julien, Sylvie Nadeau, N. Voyer, C. Roy. 2004 « Dévelopement d'un processus d'audit de la performance d'entreprises manufacturières - suite ». Info-productivité. p. 8-9
A. R. Mashreghi, H. Monajatizadeh, M. Jahazi, S. Yue. 2004 « High temperature deformation of nickel base superalloy Udimet 520 ». Materials Science and Technology vol. 20 , nº 2. p. 161-166
H. Monajati, M. Jahazi, R. Bahrami, S. Yue. 2004 « The influence of heat treatment conditions on gamma characteristics in Udimet 720 ». Materials Science and Engineering: A vol. 373 , nº 1-2. p. 286-293
Sylvie Nadeau, R. Gilbert, D. Leblanc. 2004 « Is the accident hypothesis valid in the occupational low back pain and injuries issue? ». Buletinul Institutului Politehnic Din Iasi vol. L (LIV) , nº fasc.3-4. p. 63-68
Sylvie Nadeau, R. Gilbert, D. Leblanc. 2004 « The accident hypothesis as the basic hypothesis for the identification of low back injury risk factors ». Buletinul Institutului Politehnic Din Iasi vol. L (LIV) , nº fasc. 3-4. p. 55-62
Sylvie Nadeau, D. Leblanc, R. Gilbert, Jean Arteau. 2004 « The partnership approach ». Buletinul Institutului Politehnic Din Iasi vol. L (LIV) , nº fasc. 3-4. p. 47-54
D. Prud'homme, Sylvie Nadeau, Hakim Bouzid. 2004 « Étude de mécanisme lésionnel de la hernie discale : modélisation du comportement viscoélastique ». 72e Congrès de l'ACFAS (Montréal, QC, Canada, 10-12 mai 2004)
Antoine Tahan, Victor Songmene, Jean-François Chatelain. 2004 « Case study of the application of statistical tolerances taking account of correlation ». Communication lors de la conférence : International Conference on Computers and Industrial Engineering (San Francisco, CA, USA, Nov., 2004)

Y. Amtout, Victor Songmene, Jean-François Chatelain. 2003 « Optimisation de trajectoires d'outils en FAO pour l'usinage à haute performance des moules en P20 ». Communication lors de la conférence : 4th International Conference on Industrial Automation (Montreal, QC, Canada, June 9, 2003)
Jean-François Chatelain. 2003 « Laboratoire d'ingénierie des produits, procédés et systèmes de l'ÉTS ». Communication lors de la conférence : 3e Journée d'Étude Interinstitutionnelle du Centre de Recherche en Fabrication Haute Performance (Bécancour, QC, Canada, 21 nov. 2003)
Jean-François Chatelain, Y. Boutin. 2003 « Intégration de cycles d'usinage avancés aux logiciels de CFAO ». Communication lors de la conférence : 4th International Conference on Industrial Automation (Montreal, QC, Canada, June 9, 2003)
L. Germain, N. Gey, M. Humbert, P. Bocher, M. Jahazi. 2003 « Texture and microtexture analysis of an IMI 834 alloy after thermo-mechanical processing ». Ti-2003 Science and Technology : proceedings of the 10th World Conference on Titanium held at the CCH-Congress Center Hamburg, Germany, 13-18 July 2003 (Hamburg, Germany, July 13-18, 2003) Wiley-VCH
F. Giguère, Louis Rivest, Alain Desrochers. 2003 « Improving design productivity and product data consistency ». Feature Based Product Life-Cycle Modelling : IFIP TC5 / WG5.2 & WG5.3 Conference on Feature Modelling and Advanced Design-for-the-Life-Cycle Systems (FEATS 2001) June 12–14, 2001, Valenciennes, France (Valenciennes, France, June 12-14, 2001) Springer
M. Jahazi, A. Samadi, S. Yue. 2003 « Determination of the optimum forging conditions for a 7075 aluminum alloy ». Light metals 2003 = Métaux légers : proceedings of the International Symposium on Light Metals 2003 Métaux légers (Vancouver, BC, Canada, Aug. 25-28, 2003) [Canadian Institute of Mining, Metallurgy and Petroleum]
B. Julien, Sylvie Nadeau. 2003 « Processus d'évaluation d'entreprise ». Communication lors de la conférence : Présentation à la STIQ (Sous-traitance Industrielle Québec) (Montréal, QC, Canada, 7 nov. 2003)
L. Marguerit, M. Balazinski, Victor Songmene. 2003 « Drilling of MMC : influence of cutting conditions on part roughness and form error ». Communication lors de la conférence : CIRP Workshop (Paris, France, Jan., 2003)
D. Mongrain, Sylvie Nadeau. 2003 « Groupes de sécurité au travail: revue des résultats nord-américains ». La Gazette du travail vol. 6 , nº 1. p. 76-91
S. Nadeau, H. A. Bouzid, J. P. Kenné. 2003 « Conception d'un convoyeur à bagages pour le chargement/déchargement des avions ». Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2002-2003 : Actes (Montréal, QC, Canada, 25 avril 2003) École de technologie supérieure
Sylvie Nadeau. 2003 « Cooperation in health and safety : a game theory analysis ». Pierce Law Review vol. 1 , nº 3-4. p. 219-227
Sylvie Nadeau, Hakim Bouzid, Jean-Pierre Kenné. 2003 « L'enseignement par la méthode des cas en génie mécanique ». Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2001-2002 : Actes (Montréal, QC, Canada, 11 juin 2002) École de technologie supérieure
L. Thévény, Sylvie Nadeau. 2003 « Les diverses formes de collaboration et les facteurs de réussite ». Communication lors de la conférence : 2e Séminaire international sur l'enseignement en santé-sécurité au travail de l'Association Internationale de la sécurité sociale (AISS) (Québec, QC, Canada, 6-9 oct. 2003)

Y. Boutin, Jean-François Chatelain. 2002 « Intégration des cycles d'usinage avancés aux logiciels de FAO ». Communication lors de la conférence : Séminaire sur l'Usinage à Grande Vitesse (Longueuil, QC, Canada, sept. 2002)
Jean-François Chatelain, C. Fortin. 2002 « Optimal workpiece localization for machining applications ». In Integrated design and manufacturing in mechanical engineering. p. 247-254. Kluwer Academic Publishers
Jean-François Chatelain, C. Fortin. 2002 « Optimal workpiece localization for machining applications ». 3rd Integrated Design and Manufacturing in Mechanical Engineering Conference (Montreal, Canada, May, 2000) Springer-Verlag
Jean-François Chatelain, Roland Maranzana, Serge St-Martin. 2002 « A solid model comparison approach based on a model tree analysis ». In Advances in systems theory, mathematical methods and applications . p. 239-244. WSEAS Press
Jean-François Chatelain, Roland Maranzana, Serge St-Martin. 2002 « A solid model comparison approach based on a model tree analysis ». 4th WSEAS International Conference on Mathematics and Computers in Physics (MCP) (Cancun, Mexico, May 12-16, 2002) WSEAS
Jean-François Châtelain. 2002 « Développement d'un post-processeur et d'un simulateur pour une machine 5 axes (phase 1) ». Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2000-2001 : Actes (Montréal, QC, Canada, 31 mai 2001) École de technologie supérieure
Jean-François Châtelain. 2002 « Optimisation d'un post-processeur 5 axes et développement d'outillage spécialisé (phase II) ». Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2000-2001 : Actes (Montréal, QC, Canada, 31 mai 2001) École de technologie supérieure
F. Giguere, Louis Rivest, Alain Desrochers, Roland Maranzana. 2002 « Les caractéristiques contextuelles : une solution pour accroître la productivité en CAO : De la CAO géométrique vers une CAO fonctionnelle ». Revue internationale de CFAO et d'informatique graphique vol. 17 , nº 1-2. p. 105-122
M. Jahazi, J. J. Jonas. 2002 « The non-equilibrium segregation of boron on original and moving austenite grain boundaries ». Materials Science and Engineering: A vol. 335 , nº 1-2. p. 49-61
M. Jahazi, A. R. Mashreghi. 2002 « Dissolution and precipitation kinetics of γ' in nickel base superalloy Udimet 520 ». Materials Science and Technology vol. 18 , nº 4. p. 458-462
Sylvie Nadeau. 2002 « La prévention des maux de dos: de l'entreprise à la recherche un parcours professionnel ». Communication lors de la conférence : Congrès national de la Société canadienne de génie industriel (Montréal, QC, Canada, 24-26 janv. 2002)
Sylvie Nadeau. 2002 « L’amélioration de la santé-sécurité par la conception de produits ». Communication lors de la conférence : Présentation au comité aviseur de Bombardier produits récréatifs ()
Louis Rivest. 2002 « Computer-aided design of aerospace components tools and implementation ». ASEE Annual Conference and Exposition: Vive L'ingenieur (Montreal, Canada, June 16-19, 2002) American Society for Engineering Education
Louis Rivest, Roland Maranzana, A. Desrochers. 2002 « Maintaining data consistency through integrated product process change management ». Communication lors de la conférence : 3rd Annual AIAC Aerospace Technology Collaboration Forum (Montreal, QC, Canada, May 1-2, 2002)
Victor Songmene, Bahaa Balout, Jacques Masounave. 2002 « Drilling of metal matrix composites : cutting forces and chip formation ». International Symposium on Enabling Technologies for Light Metals and Composite Materials and their End-Products (Montreal, QC, Canada, Aug. 11-14, 2002) Canadian Institute of Mining, Metallurgy and Petroleum
Victor Songmene, M. Jeu-Herault, M. Côté, M. Duval, Jacques Masounave. 2002 « Généralités sur l'aluminium dans les alliages d'aluminium moulés : connaissances et pratiques ». : CQRDA, CTIF.
Patrick Terriault, Jean-François Châtelain. 2002 « Développement de travaux personnalisés en conception assistée par ordinateur ». Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2000-2001 : Actes (Montréal, QC, Canada, 31 mai 2001) École de technologie supérieure

N. Bouikni, A. Desrochers, Louis Rivest. 2001 « Réalisation d'une architecture multi-vues pour la CAO appliquée au domaine de l'aéronautique ». Communication lors de la conférence : 69e Congrès de l'ACFAS (Sherbrooke, QC, Canada, 14-17 mai 2001)
N. Bouikni, A. Desrochers, Louis Rivest. 2001 « Élaboration d'une architecture multi-vues en CAO appliquée au domaine de l'aéronautique ». Communication lors de la conférence : Colloque IMSI 2001 (Sherbrooke, QC, Canada, 2001)
Jean-François Chatelain, C. Fortin. 2001 « Balancing technique for optimal blank part machining ». Precision Engineering vol. 25 , nº 1. p. 13-23
Étienne Fortin, Jean-François Chatelain, Louis Rivest. 2001 « Improving information flow from CAM to CNC : an innovative architecture based on BNCL virtual machine ». 29th International Conference on Computers and Industrial Engineering (Montreal, QC, Canada, Nov. 1-3, 2001) École de technologie supérieure
Robert Gilbert, Daniel Leblanc, Sylvie Nadeau. 2001 « Analyse comparative des principales méthodes d'évaluation des risques de maux de dos et préparation d'une grille d'identification des facteurs de risques ». Montréal : IRSST. 71 p.
M. Jahazi, B. Eghbali. 2001 « The influence of hot forging conditions on the microstructure and mechanical properties of two microalloyed steels ». Journal of Materials Processing Technology vol. 113. p. 594-598
M. Jahazi, A. Khodabandeh, S. T. Aghdashi. 2001 « A method to improve the toughness of forged microalloyed steels ». Proceedings of the 9th Conference of Mechanical Engineering ISME 2001 (Rasht, Iran, June 6-9, 2001)
André Moreau, Martin Lord, Daniel Lévesque, Marc Dubois, Jean Bussière, Jean-Pierre Monchalin, Christian Padioleau, Guy Lamouche, Teodor Veres, Martin Viens, Harold Hébert, Pierre Basseras, Cheng-Kuei Jen. 2001 « On-line, non-destructive mechanical property measurement using laser-ultrasound ». 110 p.
Sylvie Nadeau. 2001 « Outil d'analyse multifactorielle pour la prévention des lésions au dos ». Thèse de doctorat. Montréal, (Québec), École Polytechnique de Montréal.
Sylvie Nadeau, D. Leblanc, G. Robert. 2001 « L'approche partenariale comme réponse au phénomène d'aléa moral dans le travail autonome et polyvalent ». Comptes rendus du congrès SELF-ACE 2001 – Les transformations du travail, enjeux pour l’ergonomie (Montréal, QC, Canada, 3-5 oct. 2001)
Sylvie Nadeau, D. Mongrain. 2001 « La prévention des maux de dos : de l'entreprise à la recherche, un parcours professionnel ». Communication lors de la conférence : National Congress of IIE Canadian Chapter (Montreal, QC, Canada, Jan. 24-26, 2001)
F. K. Shafie, M. Jahazi, M. Abassi. 2001 « Influence of temperature and percent reduction on aging behavior of T-250 Maraging Steel ». Proceedings of 4th International Conference on Surface Modifications and Heat Treatment (Isphahan, Iran, May 20-23, 2001)
F. K. Shafie, M. Jahazi, Y. Kharazi, M. Abassi. 2001 « Thermomechanical processing of T-250 maraging steel ». Proceedings of the 9th Conference of Mechanical Engineering ISME 2001 (Rasht, Iran, June 6-9, 2001)
S. St-Martin, Jean-François Chatelain, Louis Rivest, Roland Maranzana. 2001 « L'évolution du modèle produit dans un contexte de SGDT: Vers la maîtrise du changement dans les modèles CAO ». 20e congrès international de la CFAO et des nouvelles technologies de conception et de fabrication (MICAD 2001) (Paris, France, 6-8 mars 2001)

S. T. Aghdashi, A. Khodabandeh, M. Jahazi. 2000 « The determination of optimum forging condiions for a vanadium containing microalloyed steel ». The Fourth International Conference on HSLA Steels October 30-November 2, 2000, Xi'an, China (Beijing, China, Oct. 30-Nov. 2, 2000) The chinese society for metals
Jean-François Chatelain, C. Fortin. 2000 « Algorithme de localisation des pièces brutes pour l'usinage ». 3e conférence internationale sur la conception et la fabrication intégrées en mécaniques IDMME 2000 et Forum SCGM 2000 (Montréal, QC, Canada, Mai 2000)
S. Hossein Nedjad, M. Jahazi. 2000 « Failure analysis and manufacturing technology of seal strips ». Proceedings of the 4th International Manufacturing Conference (Tehran, Iran, )
M. Jahazi, G. Ebrahimi. 2000 « Influence of flow-forming parameters and microstructure on the quality of a D6ac steel ». Journal of Materials Processing Technology vol. 103 , nº 3. p. 362-366
M. Jahazi, B. Egbali. 2000 « Influence of hot rolling parameters on the microstructure and mechanical properties of an ultra-high strength steel ». Journal of Materials Processing Technology vol. 103 , nº 2. p. 276-279
Mohammad Jahazi, M. Ghomi. 2000 « Texture evolution in two deep drawn aluminum alloys ». J.J. Jonas Symposium on Thermomechanical Processing of Steel: August 20-23, 2000, Ottawa, Ontario, Canada (Ottawa, ON, Canada, Aug. 20-23, 2000) Canadian Institute of Mining, Metallurgy and Petroleum
L. Macabies, A. Desrochers, L. Rivest, Roland Maranzana. 2000 « Liens multi-modèles en CAO: application au rivetage en aéronautique ». IDMME' 2000 (Montréal, QC, Canada, 16-19 mai 2000) Presses internationales Polytechnique
Roland Maranzana, Louis Rivest, Jean-François Chatelain. 2000 « Systèmes de CAO et ingénierie concourante : les effets pervers ». Communication lors de la conférence : Université d'Été de Recherche Francophone, Ingénierie Simultanée et Concourante (ISC 2000) (Arc-et-Senans, France, 3-5 juil. 2000)
H. Monajati, M. Jahazi, H. Hosseini. 2000 « A computer code for the evaluation of the residual life of different boiler components ». Proceedings of 15th International Power Engineering Conference (Tehran, Iran, June 18-22, 2000)
L. Rivest, S. Rompala, Y. Bourgeois, C. Tessier, P. Bagshaw. 2000 « Computer simulation helps produce complex composite parts for Canadair Jets ». CAD Systems vol. 18 , nº 7. p. 14-15
Louis Rivest, Steve Rompala, Yvon Bourgeois. 2000 « Software helps build a better composite part ». Machine Design vol. 72 , nº 10. p. 90-92
A. Samadi, M. Jahazi. 2000 « The determination of optimum heat treatment conditions for the forging of a 7075 Al alloy ». Proceedings of the Second Non-Ferrous Metallurgy Congress, 9-11 May 2000, Univ. of Kerman, Iran (Kerman, Iran, May 9-11, 2000)
Victor Songmene. 2000 « Usinage des composites à matrice d'alliage d'aluminium GrA-Ni ». 200 p.Thèse de doctorat. Montréal, École Polytechnique de Montréal.

Jean-François Chatelain, C. Fortin. 1999 « A CAD/CAM integrated balancing system for blank part machining ». Troisième conférence internationale sur l'automatisation industrielle, École de technologie supérieure, Montréal, 7-9 juin 1999 : actes de la conférence = Third International Conference on Industrial Automation, École de technologie supérieure, Montréal, (Montreal, Canada, June 7-9, 1999) International Association of Industrial Automation
M. Jahazi, F. Jalilian. 1999 « The influence of thermochemical treatments on interface quality and properties of copper/carbon-fibre composites ». Composites Science and Technology vol. 59 , nº 13. p. 1969-1975
Sylvie Nadeau, R. Gilbert, D. Leblanc. 1999 « Prévention des maux de dos selon une approche reposant sur les mécanismes lésionnels et les mécanismes générateurs d'efforts ». L'intégration des ressources humaines et des technologies: le défi : 3e Congrès International de Génie Industriel; Montréal, Québec, Mai 1999; actes = Integration of human resources and technologies: the challenge (Montréal, QC, Canada, 26-28 mai 1999) Presses Internationales Polytechnique
Sylvie Nadeau, D. Leblanc, R. Gilbert. 1999 « Les comportements stratégiques dans la gestion des risques de S.S.T. pour le travail autonome et polyvalent ». L'intégration des ressources humaines et des technologies: le défi : 3e Congrès International de Génie Industriel; Montréal, Québec, Mai 1999; actes = Integration of human resources and technologies: the challenge (Montréal, QC, Canada, 26-28 mai 1999) Presses Internationales Polytechnique
N. Panet-Raymond, Sylvie Nadeau, R. Gilbert, D. Leblanc. 1999 « Analyse de la stabilité posturale dans des conditions de perturbations et d'incertitudes ». L'intégration des ressources humaines et des technologies: le défi : 3e Congrès International de Génie Industriel; Montréal, Québec, Mai 1999; actes = Integration of human resources and technologies: the challenge (Montréal, QC, Canada, 26-28 mai 1999) Presses Internationales Polytechnique

Jean-François Chatelain. 1998 « Alignement imposé des points de mesure dans les zones de modèles solides pour la vérification des tolérances géométriques ». Communication lors de la conférence : Forum sur la Métrologie 98 (Laval, QC, Canada, nov. 1998)
Jean-François Chatelain. 1998 « Constrained alignment of measurement data within CAD solid zones for geometric tolerance verification ». Actes du Forum Métrologie 98 (Québec, QC, Canada, nov. 1998) Université Laval
J. Y. Chen, S. V. Hoa, C. K. Jen, M. Viens, J. P. Monchalin. 1998 « Ultrasonic evaluation of graphite/epoxy composites with different curing conditions ». Polymer Composites vol. 19 , nº 3. p. 225-232
M. Choquet, D. Lévesque, C. Néron, B. Reid, M. Viens, J.-P. Monchalin, J. P. Komorowski, R. W. Gould. 1998 « Detection of corrosion in aging aircraft structures by laser-ultrasonics ». Nondestructive Characterization of Materials VIII (Boulder, CO, USA, June 15-20, 1997) Springer US
Clément Fortin, Carl-Éric Aubin, F. Salako, B. Côté, C. Gamache, Louis Rivest. 1998 « Introduction à l'utilisation du logiciel CATIA ». Montréal, Canada : École polytechnique.
M. Jahazi. 1998 « The influence of thermomechanical treatment on the microstructure and mechanical properties of aisi 4130 steel ». Metals and Materials vol. 4 , nº 4. p. 818-822
M. Jahazi, G. Ebrahimi. 1998 « Flow localization during the forming of an ultra high strength steel ». Proceedings of the Sixth Annual ISME Conference, Tehran, Iran, 1998 (Tehran, Iran, 1998)
H. Monajati, M. Jahazi. 1998 « Residual life evaluation of critical boiler parts ». Proceedings of the International IME Conference, Tehran, Iran, 1998 (Tehran, Iran, 1998)
J.-P. Monchalin, C. Néron, M. Choquet, A. Blouin, B. Reid, D. Lévesque, D. Drolet, M. Viens, P. Bouchard, R. Héon, C. Padioleau. 1998 « Laser-ultrasonics inspection and characterization of aeronautic materials ». Alliance of the Americas : the First Pan-American Conference : proceedings of the 1st Pan-American Conference (Toronto, ON, Canada, Sept. 14-18, 1998) Canadian Society for Nondestructive Testing Inc.
J.-P. Monchalin, C. Néron, M. Choquet, D. Drolet, M. Viens, P. Bouchard, R. Héon, C. Padioleau. 1998 « Laser-ultrasonics inspection and characterization of aeronautic materials ». 7th European Conference on Non-destructive Testing (ECNDT) (Copenhagen, Denmark, May 26-29, 1998) ECNDT
Sylvie Nadeau, D. Leblanc, R. Gilbert. 1998 « Asymmetries of information in the prevention of back injuries ». INFORMS National Meeting 1998 (Montreal, QC, Canada, Apr. 26-29, 1998) INFORMS
Sylvie Nadeau, D. Leblanc, R. Gilbert. 1998 « Gestion scientifique et organisationnelle des risques de maux de dos dans la nouvelle réalité des entreprises ». Le génie industriel dans un monde sans frontières : 2e Congrès international franco-québécois du 3 au 5 septembre 1997, Albi (France) (Albi, France, 3-5 sept. 1997) Ecole des Mines
L. Rivest. 1998 « The digital implementation at bombardier aerospace : the next stretch ». CATIA Solutions magazine vol. 2 , nº 6. p. 42-43
M. Viens, H. Hébert, C. K. Jen. 1998 « Ultrasonic measurement of the remaining thickness of corroded cast iron samples ». III International Workshop--Advances in Signal Processing for NDE of Materials (Québec, QC, Canada, Aug. 05-08, 1997) The American Society for Nondestructive testing

M. Jahazi, M. Ghomi. 1997 « Microstructural evolution and formability in two aluminium alloys ». Proceedings of the Fifth Annual ISME Conference, Tabriz University, Tabriz, Iran, May 4-6, 1997 (Tabriz, Iran, May 4-6, 1997)
M. Jahazi, M. Goudarzi. 1997 « The influence of thermomechanical parameters on the earing behaviour of 1050 and 1100 aluminium alloys ». Journal of Materials Processing Technology vol. 63. p. 610-613
M. Jahazi, A. Samadi. 1997 « The influence of quench parameters on the microstructure and toughness of AISI 4130 steel ». Proceedings of the International IME Conference, Tehran, Iran, 1997 (Tehran, Iran, 1997)
Sylvie Nadeau, R. Gilbert, D. Leblanc. 1997 « La problématique de l'identification des facteurs de risques d'origine ergonomique ». Communication lors de la conférence : Présentation au groupe de recherche sur les risques technologiques majeurs (chaire Jarislowsky et centre CIRANO) (Montréal, QC, Canada, 24 oct. 1997)
Sylvie Nadeau, R. Gilbert, D. Leblanc. 1997 « Les méthodes classiques de prévention des lésions au dos, la démarche partenariale et l’outil d’identification des facteurs de risques ». Communication lors de la conférence : Présentation à des inspecteurs, des conseillers en réadaptation de la CSST et à des conseillers aux établissements de l’ASP Transport-Entreposage (Montréal, QC, Canada, 27 janv. et 15 juil. 1997)
H. Wang, B. Cao, C. K. Jen, K. T. Nguyen, M. Viens. 1997 « On-line ultrasonic monitoring of the injection molding process ». Polymer Engineering and Science vol. 37 , nº 2. p. 363-376

E. Bertrand, S. Quesnel, Sylvie Nadeau, L. Rebouillat, M. Vigeant, D. Leblanc, M. Rigaud. 1996 « Impacts stratégiques de nouvelles technologies: cas d'un dégazeur dans une acierie ». 64e Congrès de l'ACFAS, 13-17 mai 1996, Université McGill, Montréal (Montréal, QC, Canada, 13-17 mai 1996)
Bin Cao, H. Wang, Chen-Kuei Jen, N. T. Nguyen, J. Legoux, Chee Ang Loong, Martin Viens. 1996 « Ultrasonic monitoring of injection molding and die casting ». Nondestructive Evaluation for Process Control in Manufacturing (Scottsdale, AZ, USA, Dec. 03-05, 1996) SPIE
J. D. N. Cheeke, Z. Wang, M. Viens. 1996 « Thermal sprayed coatings characterization by acoustic waves ». 1996 IEEE Ultrasonics Symposium : Proceedings (San Antonio, TX, USA, Nov. 03-06, 1996) IEEE
J.-Y. Chen, S. V. Hoa, C. K. Jen, M. Viens, J.-P. Monchalin. 1996 « Ultrasonic evaluation of graphite/epoxy composites with different curing conditions ». Composites '96 and Oriented Polymers Symposium : book of proceedings (Boucherville, QC, Canada, 09-11 oct. 1996) National Research Council Canada, Industrial Materials Institute
M. Dubois, M. Viens, A. Moreau, C. K. Jen. 1996 « Ultrasonic attenuation measurements at 300 MHz ». First half of the proceedings of the Twenty-Second Symposium on Quantitative Nondestructive Evaluation (Seattle, WA, United states, July 30-Aug. 04,1995) Plenum Press
Xing Li, Zuoqing Wang, Cheng Kuei Jen, Martin Viens, J. David N. Cheeke. 1996 « Ultrasonic thin-walled tube wave structure for sensing devices ». IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control vol. 43 , nº 2. p. 331-336
Yuan Liu, Martin Viens, David Cheeke. 1996 « Behavior of extensional modes in a thin rod immersed in a viscous medium ». Journal of the Acoustical Society of America vol. 99 , nº 2. p. 706-712
J.-P. Monchalin, C. Néron, G. Vaudreuil, A. Blouin, D. Drolet, M. Dubois, M. Viens, P. Bouchard, M. Choquet, R. Héon, C. Padioleau, J.-D. Aussel. 1996 « Laser-ultrasonics for inspection and characterization of aeronautic materials ». AeroMat '96 (Dayton, OH, USA, June 03-06, 1996)
Sylvie Nadeau, R. Gilbert, D. Leblanc. 1996 « Toward a multicriterion analysis for the prevention of low back pain ». Proceedings of the Fifth Industrial Engineering Research Conference : Minneapolis, Minnesota, USA, May 18-20, 1996 (Minneapolis, MN, USA, May 18-20, 1996) Institute of Industrial Engineers
M. Viens, D. Drolet, A. Blouin, J.-P. Monchalin, C. Moreau. 1996 « Nondestructive characterization of plasma sprayed coatings by laser ultrasonics ». Thermal spray 1996: Practical solutions for engineering problems, proceedings of the 9th National thermal spray conference (Cincinnati, OH, USA, Oct. 07-11, 1996) ASM International
Martin Viens, Daniel Lévesque, Chen-Kuei Jen, Harold Hébert. 1996 « In-situ ultrasonic thickness measurement of underground water mains ». Nondestructive Evaluation of Utilities and Pipelines (Scottsdale, AZ, USA, Dec. 03-05, 1996) SPIE
Martin Viens, Paul C. H. Li, Zuoqing Wang, Cheng Kuei Jen, Michael Thompson, J. David N. Cheeke. 1996 « Mass sensitivity of thin rod acoustic wave sensors ». IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control vol. 43 , nº 5. p. 852-857

M. Goudarzi, M. Jahazi, A. Fallahi. 1995 « The influence of recrystallization temperature on the earing of a 1100 aluminum alloy ». Proceedings of the International Manufacturing Conference (Tehran, Iran, 1995)
M. Jahazi, M. Hosseinpour. 1995 « Fracture surface analysis of a welded ultra high strength steel ». The Metallurgist vol. 3. p. 10-17
M. Jahazi, F. Jalilian. 1995 « The determination of optimum fiber surface treatment for the production of Cu-Gr composites ». Proceedings of the Conference on Composites Materials (Tokyo, Japan, June 26, 1995) Japan Society of Mechanical Engineers
M. Jahazi, F. Jalilian. 1995 « The influence of chemical treatments on the interface quality and physical properties of copper-graphite composites ». Proceedings of the Tenth International Conference on Composite Materials : Whistler, British Columbia, Canada, August 14th-18th, 1995 (Whistler, BC, Canada, Aug. 14-18, 1995)
X. Li, J. D. N. Cheeke, Z. Wang, C. K. Jen, M. Viens, G. Yi, M. Sayer. 1995 « Ultrasonic thin-walled tube wave devices for sensor applications ». Applied Physics Letters vol. 67 , nº 1. p. 37-39

Marek Balazinksi, Victor Songméné. 1994 « Fraisage de l'Inconel 600 à avance variable ». Communication lors de la conférence : 62e Congrès de l'ACFAS (Montréal, QC, Canada, 16-20 mai 1994)
M. Hosseinpour, M. Jahazi. 1994 « Optimum welding of AISI 4130 steel ». Proceedings of the 2nd International ISME Conference (Tehran, Iran, May 2-5, 1994)
M. Hosseinpour, M. Jahazi. 1994 « The influence of welding parameters on the HAZ microstructure of an ultra high strength steel ». International Conference on Recent Advances in Materials and Mineral Resources (RAMM '94) : 3-5 May 1994, Penang, Malaysia (Penang, Malaysia, May 3-5, 1994)
F. Jalilian, M. Jahazi. 1994 « The effect of surface treatments on the physical behavior of copper-graphite composites ». International Conference on Recent Advances in Materials and Mineral Resources (RAMM '94): 3-5 May 1994, Penang, Malaysia (Penang, Malaysia, May 3-5, 1994)
F. Jalilian, A. Sedghi, M. Jahazi. 1994 « The influence of carbon fiber surface treatment on the mechanism of copper growth ». Proceedings of the 2nd International ISME Conference (Tehran, Iran, May 2-5, 1994)
X. Li, Z. Wang, C. K. Jen, M. Viens, J. D. N. Cheeke, G. Yi, M. Sayer. 1994 « Ultrasonic thin wall tube wave sensors ». 1994 Proceedings of IEEE Ultrasonics Symposium (Cannes, France, Oct. 31-Nov. 03, 1994) IEEE
Louis Rivest, Clément Fortin, Claude Morel. 1994 « Tolerancing a solid model with a kinematic formulation ». Computer-Aided Design vol. 26 , nº 6. p. 465-476
H. Sadeghi, M. Shariati, M. Jahazi. 1994 « A computer code for the prediction of forming steps in precision forging ». Proceedings of the 2nd International ISME Conference (Tehran, Iran, May 2-5, 1994)
M. Viens, Y. Tsukahara, C. K. Jen, J. D. N. Cheeke. 1994 « Leaky torsional acoustic modes in infinite clad rods ». Journal of the Acoustical Society of America vol. 95 , nº 2. p. 701-707

I. A. Akmoulin, M. Djahazi, N. D. Buravova, J. J. Jonas. 1993 « Superplastic forging procedures for manufacture of ceramic yttria stabilised tetragonal zirconia products ». Materials Science and Technology vol. 9 , nº 1. p. 26-33
Y. Liu, M. Viens, J. D. N. Cheeke, C. K. Jen. 1993 « Anomalous magnetoelastic waves in nickel wire ». Journal of Applied Physics vol. 73 , nº 5. p. 2584-2586
Louis Rivest, C. Fortin, Alain Desrochers. 1993 « Tolerance modeling for 3D analysis – presenting a kinematic formulation ». Proceedings of 3rd CIRP seminars on computer aided tolerancing = Tolérancement géométrique (Cachan, France, Apr. 27-28, 1993) Éditions Eyrolles
Louis Rivest, Clément Fortin, Claude Morel. 1993 « Tolerancing a solid model with a kinematic formulation ». Proceedings of the 2nd Symposium on Solid Modeling and Applications (Montreal, QC, Canada, May 19-21, 1993) ACM
M. Viens, P. C. H. Li, Z. Wang, C. K. Jen, M. Thompson, J. D. N. Cheeke. 1993 « Gravimetric response of thin rod acoustic wave sensors ». 1993 Proceedings IEEE Ultrasonics Symposium (Baltimore, MD, USA, Oct. 31-Nov. 03, 1993) IEEE
Martin Viens. 1993 « Conception et caractérisation de capteurs acoustiques ». Thèse de doctorat. Sherbrooke, Université de Sherbrooke.

M. Djahazi, X. L. He, J. J. Jonas, W. P. Sun. 1992 « Influence of boron on nature and distribution of strain induced precipitates in (Ti,Nb) high strength low alloy steels ». Materials Science and Technology vol. 8 , nº 7. p. 628-636
M. Djahazi, X. L. He, J. J. Jonas, W. P. Sun. 1992 « Nb(C, N) Precipitation and Austenite Recrystallization in Boron-containing high-strength low-alloy steels ». Metallurgical Transactions A: Physical Metallurgy and Materials Science vol. 23 A , nº 8. p. 2111-2120
F. Jalilian, A. Sedghi, M. Jahazi. 1992 « The influence of chemical surface treatment on the wettability of carbon fibers ». Proceedings of the International Confrence on Tribology (Isfahan, Iran, 1992)
M. Viens, Y. Liu, Z. Wang, C. K. Jen, J. D. N. Cheeke. 1992 « Investigations of extensional and torsional acoustic wave thin rod sensors ». First half of the proceedings of the Eighteenth Annual Review of Progress in Quantitative Nondestructive Evaluation (Brunswick, ME, USA, July 28-Aug. 02, 1991) Springer Science+Business Media

A. Akmoulin, M. Djahazi, J. J. Jonas. 1991 « Effect of initial porosity on the superplastic behavior of Y-TZP in vacuum ». Superplasticity in advanced materials: proceedings of the International Conference on Superplasticity in Advanced Materials held in Osaka, Japan, June 3-6, 1991 (Osaka, Japan, June 3-6, 1991)
I. A. Akmoulin, M. Djahazi, J. J. Jonas. 1991 « Enhanced deformation behavior of incompletely sintered Y-TZP zirconia ». Scripta metallurgica et materialia vol. 25 , nº 5. p. 1035-1040
X. L. He, M. Djahazi, J. J. Jonas, J. Jackman. 1991 « The non-equilibrium segregation of boron during the recrystallization of Nb-treated HSLA steels ». Acta Metallurgica et Materialia vol. 39 , nº 10. p. 2295-2308
C. K. Jen, J. C. H. Yu, Z. Wang, M. Viens, J. D. N. Cheeke, J. D. Dai. 1991 « Thin rod flexural acoustic wave devices: A sensor candidate ». Second half of the proceedings of the Seventeenth Annual Review of Progress in Quantitative Nondestructive Evaluation (La Jolla, California, July 15-20,1990) Plenum Press
Yuan Liu, M. Viens, J. D. N. Cheeke, C. K. Jen. 1991 « Anomalous magnetoelastic waves in nickel wire ». IEEE Ultrasonics Symposium (Orlando, FL, USA, Dec. 08-11, 1991) IEEE
Zuoqing Wang, Martin Viens, Cheng-Kuei Jen, David Cheeke, Yuan Liu. 1991 « Analysis of thin rod acoustic wave gravimetric sensors ». Sensors and Materials vol. 3 , nº 3. p. 159-172

M. Djahazi, X. L. He, J. J. Jonas. 1990 « Acceleration of Nb(C, N) precipitation in HSLA steels by boron addition ». HSLA steels, processing, properties and applications: proceedings of the Second International Conference on HSLA Steels October 28th-November 2nd, 1990, Beijing, China (Beijing, China, Oct. 28-Nov. 2, 1990)
M. Djahazi, X. L. He, J. J. Jonas, L. Collins. 1990 « The effect of Nb and b on austenite recrystallization ». Recrystallization '90: International Conference on Recrystallization in Metallic Materials: conference proceedings (Wollongong, Australia, Jan. 22-26, 1990) TMS (The Minerals, Metals & Materials Society)
Martin Viens, J. David N. Cheeke. 1990 « Highly sensitive temperature sensor using SAW resonator oscillator ». Sensors and Actuators, A: Physical vol. 24 , nº 3. p. 209-211
Z. Wang, M. Viens, C. K. Jen, J. D. N. Cheeke, Y. Liu. 1990 « Analysis of thin rod acoustic wave gravimetric sensors ». IEEE Symposium on Ultrasonics (Honolulu, HI, USA, Dec. 04-07, 1990) IEEE

M. Djahazi, X. L. He, J. J. Jonas. 1988 « Effect of boron on the kinetics of precipitation in deformed austenite ». Thermec-88: International Conference on Physical Metallurgy of Thermomechanical Processing of Steels and Other Metals: proceedings, June 6-10, 1988, Keidanren Kaikan, Tokyo, Japan (Tokyo, Japan, June 6-10, 1988) Iron and Steel Institute of Japan
M. Djahazi, X. L. He, J. J. Jonas, G. E. Ruddle. 1988 « Influence of boron distribution on recrystallization and precipitation in a Nb-Ti HSLA steel ». Processing, microstructure, and properties of HSLA steels: proceedings of an International Symposium on Processing, Microstructure, and Properties of HSLA Steels (Pittsburgh, PA, USA, Nov. 3-5, 1987)

M. Djahazi, X. L. He, J. J. Jonas. 1987 « Effect of boron on the precipitation of carbonitrides in a Nb-Ti HSLA steel ». 29th Mechanical Working and Steel Processing Conference: proceedings (Toronto, ON, Canada, Oct. 21-23, 1987)

Portes ouvertes

Publications

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996

1995

1994

1993

1992

1991

1990

1988

1987