Martin Viens
Professeur
Département
Département de génie mécanique
Formation
B.Ing., Ph.D. (Université de Sherbrooke)
Bureau
A-2904
Courriel
Unités de recherche
Axes de recherche
- Matériaux et fabrication
- Aéronautique et aérospatiale
Expertises
- Évaluation et contrôle non destructif
- Instrumentation et contrôle des procédés industriels
- Électrotechnique et machines tournantes électriques
Cours
Encadrements
- En codirection avec : Maldague, Xavier
Techniques avancées de traitement de signaux d'émissions acoustiques pour améliorer la détection de défauts dans des vaisseaux sous pression, par Polyakov,Konstantin
Hiver 2022 - En codirection avec :
Image Acquisition and Processing in an Attempt to Automate the Fluorescent Penetrant Inspection, par Alba,César Augusto Corrêa
Été 2011 - En codirection avec : Lebrun, Gilbert
Effet de l'usinage sur les propriétés mécaniques en tension et contrôle non-destructif des matériaux composites, par Généreux,Louis-Alexandre
Automne 2012 - En codirection avec :
Évaluation de méthodes de contrôle non destructives (CND) alternatives pour remplacer l'attaque anodique des superalliages de nickel, par Pourfard,Atousa
Automne 2013 - En codirection avec : Bélanger, Pierre
Simulation of Lamb Wave Propagation and Interaction with Defects using Commercially Available Software, par Travaglini,Christophe
Automne 2015 - En codirection avec : Bélanger, Pierre
Development of a Low-frequency Piezo-ceramic Transducer Optimized for the Generation of a Plane fundamental Shear Horizontal Guided Wave, par Boivin,Guillaume
Été 2016 - En codirection avec :
Non-Destructive Evaluation of Impact Damage in Carbon Fibre Reinforced Polymer Using Infrared Thermography and Shearography, par Khademi Far,Ali
Été 2020
- En codirection avec :
Characterization of Shrinkage Porosity and Fatigue Properties of Cast CA-6NM Low Carbon Martensitic Stainless Steels, par Meimandi,Shilan
Automne 2021 - En codirection avec : Tahan, Antoine
Evaluation of the Reliability of Nondestructive Ultrasonic Inspection Methods for the Detection and the Characterization of Defects in Hydroelectric Turbine Welded Joints, par Habibzadeh Boukani,Hamid
Hiver 2018 - En codirection avec : Xie, Wen-Fang
Development of an Eddy Current Inversion Algorithm for Characterization of Surface Defects, par Mohseni,Ehsan
Été 2018 - En codirection avec :
Non-destructive Evaluation of Hydrogen Embrittlement in Cadmium-Plated High Strength Steel Using Ultrasonic Surface Waves and Eddy Currents, par Shahmiri,Hamidreza
Automne 2021 - En codirection avec : Rousseau, Gilles
Advanced Ultrasonic Inspection Technologies Applied to the Welded Joints of Hydraulic Turbine Runners, par Bajgholi,Mohammadebrahim
Hiver 2023
- En codirection avec : Carret, Jean-Claude
Développement d'un marteau à impact automatisé pour faire des essais de résonance sur des matériaux de construction, par Bruère,Adrien
Hiver 2024
Publications
- P. Masson, A. Maslouhi, P. Micheau, N. Quaegebeur, L. Lessard, P. Hubert, M. Viens, S. Kruger, M. R. Mofakhami, J. Pinsonnault, Z. Hajjar, P-C. Ostiguy, M. Sherafat, D. Ramos Franca. 2014 « Characterization of guided wave propagation in aircraft structures ». Affiche présentée lors de la conférence : 1er Forum du Réseau national | 7e Forum du CRIAQ (Montreal, QC, Canada, Apr. 16-17, 2014)
- Riad Khettabi, Abdelhakim Djebara, Victor Songmene, Martin Viens, Stéphane Hallé, François Morency, Yves Cloutier, Jules Kouam, Jacques Masounave. 2009 « Control and measuring of manufactured nanoparticle ». Affiche présentée lors de la conférence : INNO 09 : La Semaine de l'Innovation (Montréal, Canada, 23-24 avril 2009)
- Edward Ginzel, Mohammad E. Bajgholi, Mariana Burrowes M. Guimarâes, Fabrice Foucher, Gilles Rousseau, Martin Viens. 2022 « Total focusing method used for flaw sizing in probability of detection determination ». e-Journal of Nondestructive Testing vol. 27 , nº 7
- Mohammad E. Bajgholi, Gilles Rousseau, Edward Ginzel, Denis Thibault, Martin Viens. 2023 « Total focusing method applied to probability of detection ». International Journal of Advanced Manufacturing Technology vol. 126 , nº 7-8. p. 3637-3647
- Mohammad Ebrahim Bajgholi, Gilles Rousseau, Martin Viens, Denis Thibault. 2023 « Advanced ultrasonic inspection methodologies for fitness-for-service (F.F.S) assessment of hydraulic turbines ». International Journal of Advanced Manufacturing Technology vol. 129 , nº 5-6. p. 2621-2633
- Mohammad Ebrahim Bajgholi, Gilles Rousseau, Martin Viens, Denis Thibault, Martin Gagnon. 2023 « Reliability assessment of non-destructive testing (NDT) for the inspection of weld joints in the hydroelectric turbine industry ». International Journal of Advanced Manufacturing Technology vol. 128 , nº 9-10. p. 4223-4233
- H. Shahmiri, M. Viens. 2022 « Nondestructive evaluation of electroplating-induced hydrogen embrittlement in cadmium-coated high-strength steel using ultrasonic surface waves ». Materials Evaluation vol. 79 , nº 11. p. 1094-1104
- Mohammad Ebrahim Bajgholi, Gilles Rousseau, Martin Viens, Denis Thibault. 2021 « Capability of advanced ultrasonic inspection technologies for hydraulic turbine runners ». Applied Sciences vol. 11 , nº 10
- Ehsan Mohseni, Hamid Habibzadeh Boukani, Demartonne Ramos Franca, Martin Viens. 2020 « A study of the automated eddy current detection of cracks in steel plates ». Journal of Nondestructive Evaluation vol. 39 , nº 1
- Ehsan Mohseni, Demartonne Ramos Franca, Martin Viens, Wen Fang Xie, Baoguang Xu. 2020 « Finite element modelling of a reflection differential split-D eddy current probe scanning surface notches ». Journal of Nondestructive Evaluation vol. 39 , nº 2
- Ehsan Mohseni, Martin Viens, Wen-Fang Xie. 2020 « Adaptive neuro-fuzzy inference system trained for sizing semi-elliptical notches scanned by eddy currents ». Journal of Nondestructive Evaluation vol. 39 , nº 1
- Konstantin Polyakov, Fernando López, Martin Viens. 2020 « Advanced signal processing techniques to improve the detection of defects in pressure vessels by acoustic emission testing ». The e-Journal of Nondestructive Testing vol. 25 , nº 12
- Guillaume Boivin, Martin Viens, Pierre Belanger. 2018 « Plane wave SH0 piezoceramic transduction optimized using geometrical parameters ». Sensors vol. 18 , nº 2
- Hamid Habibzadeh Boukani, Martin Viens, Souheil-Antoine Tahan, Martin Gagnon. 2018 « Case study on the integrity and nondestructive inspection of flux-cored arc welded joints of Francis turbine runners ». International Journal of Advanced Manufacturing Technology vol. 98 , nº 5-8. p. 2201-2211
- Shilan Meimandi, Nicolas Vanderesse, Denis Thibault, Philippe Bocher, Martin Viens. 2017 « Macro-defects characterization in cast CA-6NM martensitic stainless steel ». Materials Characterization vol. 124. p. 31-39
- Christophe Travaglini, Christophe Bescond, Martin Viens, Pierre Belanger. 2017 « Feasibility of high frequency guided wave crack monitoring ». Structural Health Monitoring vol. 16 , nº 4
- J. Zheng, W. F. Xie, Martin Viens, L. Birglen, I. Mantegh. 2015 « Design of an advanced automatic inspection system for aircraft parts based on fluorescent penetrant inspection analysis ». Insight: Non-Destructive Testing and Condition Monitoring vol. 57 , nº 1. p. 18-24 and 34
- Sylvie Nadeau, Michèle Bouchard, Maximilien Debia, Nathalie DeMarcellis-Warin, Stéphane Hallé, Victor Songmene, Marie-Christine Therrien, Kevin Wilkinson, Barthelemy Ateme-Nguema, Genevieve Dufour, André Dufresne, Julien Fatisson, Sami Haddad, Madjid Hadioui, Jules Kouam, François Morency, Robert Tardif, Martin Viens, Scott Weichenthal, Claude Viau, Michel Camus. 2013 « EquiNanos: innovative team for nanoparticle risk management ». Nanomedicine : Nanotechnology, Biology and Medicine vol. 9 , nº 1. p. 22-24
- J. Y. Chen, S. V. Hoa, C. K. Jen, M. Viens, J. P. Monchalin. 1998 « Ultrasonic evaluation of graphite/epoxy composites with different curing conditions ». Polymer Composites vol. 19 , nº 3. p. 225-232
- H. Wang, B. Cao, C. K. Jen, K. T. Nguyen, M. Viens. 1997 « On-line ultrasonic monitoring of the injection molding process ». Polymer Engineering and Science vol. 37 , nº 2. p. 363-376
- Xing Li, Zuoqing Wang, Cheng Kuei Jen, Martin Viens, J. David N. Cheeke. 1996 « Ultrasonic thin-walled tube wave structure for sensing devices ». IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control vol. 43 , nº 2. p. 331-336
- Yuan Liu, Martin Viens, David Cheeke. 1996 « Behavior of extensional modes in a thin rod immersed in a viscous medium ». Journal of the Acoustical Society of America vol. 99 , nº 2. p. 706-712
- Martin Viens, Paul C. H. Li, Zuoqing Wang, Cheng Kuei Jen, Michael Thompson, J. David N. Cheeke. 1996 « Mass sensitivity of thin rod acoustic wave sensors ». IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control vol. 43 , nº 5. p. 852-857
- X. Li, J. D. N. Cheeke, Z. Wang, C. K. Jen, M. Viens, G. Yi, M. Sayer. 1995 « Ultrasonic thin-walled tube wave devices for sensor applications ». Applied Physics Letters vol. 67 , nº 1. p. 37-39
- M. Viens, Y. Tsukahara, C. K. Jen, J. D. N. Cheeke. 1994 « Leaky torsional acoustic modes in infinite clad rods ». Journal of the Acoustical Society of America vol. 95 , nº 2. p. 701-707
- Y. Liu, M. Viens, J. D. N. Cheeke, C. K. Jen. 1993 « Anomalous magnetoelastic waves in nickel wire ». Journal of Applied Physics vol. 73 , nº 5. p. 2584-2586
- Zuoqing Wang, Martin Viens, Cheng-Kuei Jen, David Cheeke, Yuan Liu. 1991 « Analysis of thin rod acoustic wave gravimetric sensors ». Sensors and Materials vol. 3 , nº 3. p. 159-172
- Martin Viens, J. David N. Cheeke. 1990 « Highly sensitive temperature sensor using SAW resonator oscillator ». Sensors and Actuators: A. Physical vol. 24 , nº 3. p. 209-211
- Louis-Alexandre Généreux, Gilbert Lebrun, Martin Viens, Jean-François Chatelain. 2019 « Evaluation of machining defects in a composite laminate by combining non-destructive and tensile testing ».
- Mohammad E. Bajgholi, Gilles Rousseau, Martin Viens, Denis Thibault. 2020 « Performance of Ultrasonic Inspection on hydroelectric turbine runner ». Communication lors de la conférence : 3rd International Symposium on Structural Health Monitoring and Nondestructive Testing (Québec, QC, Canada, Nov. 25-26, 2020)
- Mohammad Ebrahim Bajgholi, Martin Viens. 2019 « Evaluation of the dead zones in the welded joints of hydraulic turbine runners ». Communication lors de la conférence : NDT in Canada 2019 (Edmonton, AB, Canada, June 18-20, 2019)
- Ali Khademi Far, Louis-Daniel Théroux, Martin Viens, Oliver Arés, Hakim Bendada. 2019 « Non-destructive evaluation of impact damage in CFRP by means of IRT, shearography and ultrasonic testing ». Communication lors de la conférence : NDT in Canada 2019 (Edmonton, AB, Canada, June 18-20, 2019)
- H. H. Boukani, E. Mohseni, M. Viens. 2017 « Effect of fatigue crack orientation on the sensitivity of eddy current inspection in martensitic stainless steels ». Communication lors de la conférence : NDT in Canada 2017 (Québec, QC, Canada, June 06-08, 2017)
- E. Mohseni, M. Viens. 2017 « Sensitivity of eddy current signals to probe's tilt and lift-off while scanning semi-elliptical surface notches - a finite element modeling approach ». Communication lors de la conférence : NDT in Canada 2017 (Québec, QC, Canada, June 06-08, 2017)
- Denis Thibault, Shilan Meimandi, Nicolas Vanderesse, Philippe Bocher, Martin Viens, Myriam Brochu, Martin Gagnon. 2017 « Linking defects found by non-destructive testing in stainless steel castings to the fatigue analysis of hydraulic turbines ». Communication lors de la conférence : 3rd International Symposium on Fatigue Design and Material Defects (FDMD) (Lecco, Italy, Sept. 19-22, 2017)
- Martin Viens, N. Fournier, S. Carpentier. 2011 « Les défis NDT en aéronautique ». Communication lors de la conférence : Atelier Organisé dans le Cadre du Colloque Aérotechnique (Montréal, QC, Canada, 15 mars 2011)
- Stéphane Hallé, Jules Kouam, Victor Songmene, François Morency, Martin Viens, Yves Cloutier, Jacques Masounave, Riad Khettabi, Abdelhakim Djebara. 2009 « Procédure de mesure et de contrôle des nanoparticules manufacturés ». Communication lors de la conférence : Conférences Scientifiques, Sécurité des Travailleurs et Contrôle des Risques Industriels (Montréal, QC, Canada, 17 sept. 2009)
- R. Khettabi, A. Djebara, V. Songméné, M. Viens, S. Hallé, F. Morency, Y. Cloutier, J. Kouam, J. Masounave. 2009 « Procedure of measuring and controlling manufactured nanoparticles ». Communication lors de la conférence : INNO 2009 : La semaine de l'innovation (Montréal, QC, Canada, 23-24 avr. 2009)
- Guillaume Boivin, Martin Viens, Pierre Belanger. 2016 « Development of a low frequency shear horizontal piezoelectric transducer for the generation of plane SH waves ».
- Ehsan Mohseni, Martin Viens, Demartonne R. Franca. 2016 « A model-based study of the effect of semi-elliptical surface notch geometry on the signal of a Split-D eddy current probe ».
- Christophe Travaglini, Christophe Bescond, Dermartonne Ramos Franca, Silvio E. Kruger, Martin Viens, Pierre Bélanger. 2016 « Scattering of high order guided wave modes around a through-thickness circular hole ».
- Lionel Birglen, Benoit Leblanc, Xavier Maldague, Iraj Mantegh, Sylvain Roberge, Martin Viens, Wen-fang Xie. 2015 « Introduction of a robotic system for aerospace manufacturing: The case for non-destructive inspection and beyond ».
- H. H. Boukani, S. M. Chentouf, Martin Viens, S.-Antoine Tahan, M. Gagnon. 2015 « The effect of martensitic stainless steel microstructure on the ultrasonic inspection of turbine runner joints ».
- P-C. Ostiguy, M. H. Sherafat, D. R. Franca, N. Bouslama, N. Quaegebeur, A. Maslouhi, L. Lessard, P. Hubert, M. Viens, M. R. Mofakhami, Z. Hajjar, P. Masson. 2015 « Selection of structural features for the systematic study of guided wave propagation and interaction with damage ».
- H. H. Boukani, Martin Viens, S.-Antoine Tahan, M. Gagnon. 2014 « On the performance of nondestructive testing methods in the hydroelectric turbine industry ».
- Baoguang Xu, W. F. Xie, Martin Viens, Ehsan Mohseni, Lionel Birglen, Iraj Mantegh. 2013 « Intelligent eddy current crack detection system design based on neuro-fuzzy logic ».
- J. Zheng, W. F. Xie, Martin Viens, L. Birglen, I. Mantegh. 2013 « Design of advanced automatic inspection system for turbine blade FPI analysis ».
- P. Masson, N. Quaegebeur, P. Micheau, A. Maslouhi, M. Viens, L. Lessard, P. Hubert, S. Kruger. 2012 « Characterization of guided wave propagation in aircraft structures ».
- C. A. C. Alba, Martin Viens, X.-W. Tu. 2011 « Development of an image acquisition and processing system for automation of fluorescent penetrant inspection (FPI) ».
- L. A. Généreux, Martin Viens, G. Lebrun. 2011 « Comparison of ultrasonic testing and infrared thermography for the detection of machining defects in composite materials ».
- A. Szymanski, J. Masounave, M. Viens, J. Litwin. 2008 « Émission de poussière par frottement ».
- A. Szymanski, J. Masounave, M. Viens. 2007 « Les différentes sources d’émission de particules fines et ultrafines dans l’air ».
- Martin Viens, Z. Wang. 2005 « HBAR-spectroscopy used for materials characterization ».
- M. Choquet, D. Lévesque, C. Néron, B. Reid, M. Viens, J.-P. Monchalin, J. P. Komorowski, R. W. Gould. 1998 « Detection of corrosion in aging aircraft structures by laser-ultrasonics ».
- J.-P. Monchalin, C. Néron, M. Choquet, A. Blouin, B. Reid, D. Lévesque, D. Drolet, M. Viens, P. Bouchard, R. Héon, C. Padioleau. 1998 « Laser-ultrasonics inspection and characterization of aeronautic materials ».
- J.-P. Monchalin, C. Néron, M. Choquet, D. Drolet, M. Viens, P. Bouchard, R. Héon, C. Padioleau. 1998 « Laser-ultrasonics inspection and characterization of aeronautic materials ».
- M. Viens, H. Hébert, C. K. Jen. 1998 « Ultrasonic measurement of the remaining thickness of corroded cast iron samples ».
- Bin Cao, H. Wang, Chen-Kuei Jen, N. T. Nguyen, J. Legoux, Chee Ang Loong, Martin Viens. 1996 « Ultrasonic monitoring of injection molding and die casting ».
- J. D. N. Cheeke, Z. Wang, M. Viens. 1996 « Thermal sprayed coatings characterization by acoustic waves ».
- J.-Y. Chen, S. V. Hoa, C. K. Jen, M. Viens, J.-P. Monchalin. 1996 « Ultrasonic evaluation of graphite/epoxy composites with different curing conditions ».
- M. Dubois, M. Viens, A. Moreau, C. K. Jen. 1996 « Ultrasonic attenuation measurements at 300 MHz ».
- J.-P. Monchalin, C. Néron, G. Vaudreuil, A. Blouin, D. Drolet, M. Dubois, M. Viens, P. Bouchard, M. Choquet, R. Héon, C. Padioleau, J.-D. Aussel. 1996 « Laser-ultrasonics for inspection and characterization of aeronautic materials ».
- M. Viens, D. Drolet, A. Blouin, J.-P. Monchalin, C. Moreau. 1996 « Nondestructive characterization of plasma sprayed coatings by laser ultrasonics ».
- Martin Viens, Daniel Lévesque, Chen-Kuei Jen, Harold Hébert. 1996 « In-situ ultrasonic thickness measurement of underground water mains ».
- X. Li, Z. Wang, C. K. Jen, M. Viens, J. D. N. Cheeke, G. Yi, M. Sayer. 1994 « Ultrasonic thin wall tube wave sensors ».
- M. Viens, P. C. H. Li, Z. Wang, C. K. Jen, M. Thompson, J. D. N. Cheeke. 1993 « Gravimetric response of thin rod acoustic wave sensors ».
- M. Viens, Y. Liu, Z. Wang, C. K. Jen, J. D. N. Cheeke. 1992 « Investigations of extensional and torsional acoustic wave thin rod sensors ».
- C. K. Jen, J. C. H. Yu, Z. Wang, M. Viens, J. D. N. Cheeke, J. D. Dai. 1991 « Thin rod flexural acoustic wave devices: A sensor candidate ».
- Yuan Liu, M. Viens, J. D. N. Cheeke, C. K. Jen. 1991 « Anomalous magnetoelastic waves in nickel wire ».
- Z. Wang, M. Viens, C. K. Jen, J. D. N. Cheeke, Y. Liu. 1990 « Analysis of thin rod acoustic wave gravimetric sensors ».
- Martin Viens. 1993 « Conception et caractérisation de capteurs acoustiques ». Thèse de doctorat. Sherbrooke, Université de Sherbrooke.
- Victor Songmene, Riad Khettabi, Martin Viens, Jules Kouam, Stéphane Hallé, François Morency, Jacques Masounave, Abdelhakim Djebara. 2015 « Nanoparticle measurement, control and characterization: procedure applied to machining and mechanical friction ». IRSST. 82 p.
- Victor Songmene, Riad Khettabi, Martin Viens, Jules Kouam, Stéphane Hallé, François Morency, Jacques Masounave, Abdelhakim Djebara. 2014 « Mesure, contrôle et caractérisation des nanoparticules : Procédure appliquée à l'usinage et au frottement mécanique ». Montréal, Québec, Canada : IRSST. 93 p.
- André Moreau, Martin Lord, Daniel Lévesque, Marc Dubois, Jean Bussière, Jean-Pierre Monchalin, Christian Padioleau, Guy Lamouche, Teodor Veres, Martin Viens, Harold Hébert, Pierre Basseras, Cheng-Kuei Jen. 2001 « On-line, non-destructive mechanical property measurement using laser-ultrasound ». 110 p.