Publications

Lydia Benazzouz, Mounir Baiteche, Jean-Benoît Morin, Lemoine William Scott, Elizabeth Bilitz, Mohammad Jahazi. 2026 « Influence of ingate design on macrosegregation severity in a large-size steel ingot ». International Journal of Advanced Manufacturing Technology
Sagar Jose, Khanh T. P. Nguyen, Kamal Medjaher, Ryad Zemouri, Melanie Levesque, Antoine Tahan. 2026 « A modular deep learning methodology for multi-fault machine health diagnostics from sparse and imbalanced multimodal data ». Neurocomputing vol. 666
Sambhaji Kusekar, Prashant Dhondapure, Mohammad Jahazi, Showmik Ahsan, Henry Young, Tushar Borkar. 2026 « Microstructural evolution and high-temperature deformation behavior of wire arc additively manufactured Inconel 718 forging Preforms: Toward a hybrid additive–forging process ». Journal of Materials Research and Technology vol. 40. p. 1364-1380
Musa Muhammed, Mousa Javidani, Majid Heidari, Tom Levasseur, Mohammad Jahazi. 2026 « Influence of substrate surface finish on the wear and corrosion behaviour of AlTiN/AlTiCrN coatings ». Tribology Letters vol. 74 , nº 1
Mai-Van Tran, Henri Champliaud, Zhaoheng Liu, Sergio Elizalde, Mohammad Jahazi. 2026 « Wrinkle suppression in metal spinning using Flanged-Edge blanks: Experiments and finite element analysis ». International Journal of Advanced Manufacturing Technology

Emma Alix, Sylvie Nadeau, Jean-Pierre Kenné, Antoine Tahan. 2025 « Les défis du désassemblage à l'ère de l'électrique dans l’industrie automobile ». Affiche présentée lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 05-09 mai 2025)
H. R. Ammar, E. Samuel, F. H. Samuel, E. Elsharkawi, H. W. Doty, V. Songmene. 2025 « Effect of Be, Sr, Mn, Mg, Cr and Si Addition on neutralization and fragmentation of β-Al5SiFe Phase in Al-(6-10) %Si Alloys ». International Journal of Metalcasting
C. Antoine, B. Pierre, P. Guillaume, L. Alain. 2025 « Creating schematic representation of corrosion using CGAN and ultrasonic imaging ». SPIE Smart Structures + Nondestructive Evaluation (Vancouver, BC, Canada, Mar. 17-20, 2025) SPIE
Christian Appia, Victor Songmene. 2025 « Reduction of fine and ultrafine particles by water: Application to the machining of dusty materials ». Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Riadh Azzaz, Mohammad Jahazi, Samira Ebrahimi Kahou, Elmira Moosavi-Khoonsari. 2025 « Prediction of final phosphorus content of steel in a scrap-based electric arc furnace using artificial neural networks ». Metals vol. 15 , nº 1
William Babin, Ahmed Joubair, Souheil-Antoine Tahan. 2025 « Experimental repeatability assessment of a metrology-assisted robotic assembly system using iGPS tracking ». Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Abderraouf Benabdesselam, Quang Hung Pham, Martin Gagnon, Antoine Tahan. 2025 « A multi-layer perceptron approach for indirect measurement of erosive cavitation in hydraulic turbines ». IET Conference Proceedings (Bruges, Belgium, June 02-05, 2025) Institution of Engineering and Technology
Lydia Benazzouz, Mounir Baiteche, Patrice Ménard, Mohammad Jahazi. 2025 « Modeling the influence of stool volume on flow behavior and defect formation in a 20 MT steel ingot ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Lydia Benazzouz, Abdelhalim Loucif, Gary Brionne, Chunping Zhang, Paloma Isabel Gallego, Jean-Benoit Levesque, Naima Boutarek-Zaourar, Mohammad Jahazi. 2025 « Assessing the influence of DSC parameters on accurate determination of liquidus and solidus temperatures of a medium carbon low-alloy steel ». Journal of Phase Equilibria and Diffusion vol. 46 , nº 1. p. 119-132
Yacine Boucherit, Mohammad Jahazi. 2025 « Evaluation of local mechanical properties and correlation with tensile properties of AA7075-T6 friction stir welds via shear punch testing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Pierre Bélanger, Thibault Latete. 2025-01-21 « Ultrasonic testing for defect detection ». Brevet américain US 12,203,897.
Aubin Chaboty, Vu-Hieu Nguyen, Guillame Haiat, Pierre Bélanger. 2025 « Estimating the properties of bone phantom cylinders through the inversion of axially transmitted low-frequency ultrasonic guided waves ». Ultrasonics vol. 155
Sabrine Chahdoura, Riadh Bahloul, Mehdi Tlija, Antoine Tahan. 2025 « Multi-objective optimization of PLA-FDM parameters for enhancement of industrial product mechanical performance based on GRA-RSM and BBD ». Progress in Additive Manufacturing vol. 10 , nº 2. p. 1355-1383
Samir Mourad Chentouf, Philippe Grandmont, Mohammad Saadati, Nora Amimer, Mohammad Jahazi. 2025 « Influence of friction-stir-processing parameters on the microstructure and local mechanical properties of an aluminium-6% magnesium-H18 alloy ». Metals vol. 15 , nº 7
Antoine Chrétien, Antoine Tahan, Francis Pelletier. 2025 « Impact of wind turbine nominal power limitation over wind turbine blade remaining useful life and its economic consequences ». Wind Engineering vol. 49 , nº 2. p. 426-443
Parisa Darvishmotevally, Mohammad Saadati, Jonathan Cormier, Mohammad Jahazi. 2025 « Morphology evolution of plate-like precipitates in a polycrystalline Ni-based superalloy ». Journal of Alloys and Compounds vol. 1040
Prashant Dhondapure, Soumyaranjan Nayak, Simin Dourandish, Mohammad Jahazi. 2025 « Influence of deformation path on microstructure evolution during multi-step deformation of a high strength steel: Experiments and FE analysis ». Scientific Reports vol. 16 , nº 1
H. W. Doty, H. R. Ammar, A. M. Samuel, F. H. Samuel, V. Songmene. 2025 « Effect of La and Ce addition on the microstructural characteristics and tensile properties of 220 and 356.1 alloys ». International Journal of Metalcasting
H. W. Doty, H. R. Ammar, A. M. Samuel, V. Songmene, F. H. Samuel. 2025 « Effect of alloy composition, solidification rate, porosity level, grain refining and modification on the performance of aluminum-based alloys ». Journal of Materials Engineering and Performance
H. W. Doty, J. Hernandez-Sandoval, H. R. Ammar, V. Songmene, F. H. Samuel. 2025 « Determination of Young's modulus in aluminum alloys: Role of precipitates, dispersoids, and intermetallics ». Journal of Materials Research and Technology vol. 37. p. 3549-3562
H. W. Doty, E. Samuel, A. M. Samuel, E. Elsharkawi, V. Songmene, F. H. Samuel. 2025 « Effect of mischmetal concentration and superheating on the microstructure and tensile properties A319.1: Role of Fe content ». Journal of Materials Research and Technology vol. 35. p. 51-66
Herbert W. Doty, Ehab Samuel, Agnes M. Samuel, Victor Songmene, Fawzy H. Samuel. 2025 « Effect of melt treatment and heat treatment on the performance of aluminum cylinder heads ». Materials vol. 18 , nº 5
Herbert Doty, Ehab Samuel, Agnes M. Samuel, Ehab Elsharkawi, Victor Songmene, Fawzy H. Samuel. 2025 « Effect of Fe concentration and superheating on the microstructure and tensile properties of high Mg 413.0-Type Alloys: Role of Sr, Be, P, and La ». Materials vol. 18 , nº 2
Mohamed Islem Hafied, Wael Mateur, Victor Songmene, Jules Kouam, Ali Bahloul. 2025 « Usinage et finition saine des pierres naturelles et des pierres artificielles: Revue des meilleures pratiques ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Luis Miguel Moreno Haro, Adaiton Oliveira-Filho, Bruno Agard, Antoine Tahan. 2025 « Failure detection in sensors via variational autoencoders and image-based feature representation ». Sensors vol. 25 , nº 7
Manel Houria, Kianoosh Kaveh, Jean-Benoit Morin, Mohammad Jahazi, Elmira Moosavi. 2025 « Computational thermodynamics approach to overcoming challenges in high-nitrogen low-manganese stainless steel production ». Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Moloud Jafari, Sasan Sattarpanah Karganroudi, Louis Rivest, Souheil Antoine Tahan. 2025 « Empirical quantification of uncertainty in iGPS measurements for assembly operations ». Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Wonjong Jeong, Jeongho Yang, Joon Phil Choi, Ji Yong Hwang, Young Won Kim, Seong Je Park, Jae Won Choi, Woongbeom Heogh, Hoyoung Lee, Jinsoo Park, Min-Kyo Jung, Ji Eun Lee, Ho Jin Ryu, Tae-Sik Jang, Hyun-Do Jung, Mohammad Jahazi, Jubert Pasco, Myoung-Gyu Lee, Hyejin Park, Seung Ki Moon, Rigoberto C. Advincula, Sang Hoon Kim, Clodualdo Aranas. 2025 « Al-based functionally graded super-intermetallic compounds for the turbine blade of a high-performance jet engine ». Advanced Composites and Hybrid Materials vol. 8 , nº 6
Sagar Jose, Ryad Zemouri, Khanh T. P. Nguyen, Kamal Medjaher, Mélanie Lévesque, Antoine Tahan. 2025 « Prognostics of complex machinery with sparse multilabel multimodal run-to-failure data: A graph neural network approach ». Advanced Engineering Informatics vol. 65 , nº Part D
Mohamed Hosame Kanali, Souheil-Antoine Tahan, Lucas Hof. 2025 « 3D metrology-assisted assembly and augmented reality ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Kianoosh Kaveh, Mansoor Barati, Mohammad Jahazi, Elmira Moosavi-Khoonsari. 2025 « Degradation mechanisms of magnesia-carbon refractories in radiation heat-affected wall of steel electric arc furnace ». Ceramics International vol. 51 , nº 25, Part C.
Kianoosh Kaveh, Mohammad Jahazi, Paloma Isabel Gallego, Elmira Moosavi-Khoonsari. 2025 « Effect of Cr2O3 in steel refining slag on the corrosion kinetics of MgO-C refractories ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Jacques Lanteigne, Henri Champliaud, Mohammad Jahazi, Xuan-Tan Pham, Reza Bab Nadi. 2025 « Numerical prediction of fatigue crack propagation in E410NiMo and 13Cr-6Ni using finite element method ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Eloi Lombard, Pierre Bélanger. 2025 « Characterization and classification of flaws in PAUT using a convolutional neural network ». SPIE Smart Structures + Nondestructive Evaluation (Vancouver, BC, Canada, Mar. 17-20, 2025) SPIE
Abdelhalim Loucif, Davood Shahriari, Kanwal Chadha, Chunping Zhang, Jean-Benoit Morin, Mohammad Jahazi. 2025 « Effect of cooling rate on the as-cast microstructure of a high strength steel produced in a large size ingot ». Key Engineering Materials vol. 1016. p. 9-14
Mohammad Maroufkhani, Alireza Khodabandeh, Iulian Radu, Mohammad Jahazi. 2025 « Hybrid GTAW–FCAW of 316L stainless steel pipes: Influence of oxygen content in baking gas and surface preparation on oxide characteristics and corrosion behavior ». Journal of Manufacturing and Materials Processing vol. 9 , nº 11
Mohammad Maroufkhani, Alireza Khodabandeh, Iulian Radu, Elmira Moosavi-Khoonsari, Mohammad Jahazi. 2025 « Thermodynamic and kinetic analyses of high temperature oxidation of 316L stainless steel ». Results in Materials vol. 28
Wael Mateur, Victor Songmene, Ali Bahloul, Mohamed Nejib Saidi, Jules Kouam. 2025 « Investigation of air quality and particle emission during wet granite edge finishing on machine tool with half-beveled and ogee profile tools ». Journal of Manufacturing and Materials Processing vol. 9 , nº 12
Wael Mateur, Victor Songmene, Jules Kouam, Ali Bahloul. 2025 « Optimization of wet edge finishing of natural stones: Influence of tool geometry, grit size and cutting conditions ». Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Hamza Sofiane Meddas, Muftah Zorgani, Majid Heidari, Mousa Javidani, Tom Levasseur, Mohammad Jahazi. 2025 « Crystallographic texture and precipitation control via double austenitization in high-performance tool steel ». Materials and Design vol. 257
Hamza Sofiane Meddas, Muftah Zorgani, Mohammad Jahazi, Mousa Javidani, Tom Levasseur. 2025 « Impact of orientation and stacking on knife distortion during quenching ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Hadil Messikh, Mohammad Jahazi, Mounir Baiteche, Jean-Benoit Morin. 2025 « Numerical investigation of water quenching of large forged steel blocks: Effect of bath design on water agitation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Sajad Mirzaei, Mohammad Jahazi, Jean-Benoit Morin. 2025 « Machine learning-based optimization of tempering parameters in steel manufacturing using industrial electric furnaces ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Sajad Mirzaei, Jean-Benoit Morin, Mohammad Jahazi. 2025 « Data-driven decision support for furnace loading in steel tempering: a machine learning approach based on industrial operations ». Journal of Intelligent Manufacturing
Sajad Mirzaei, Ehsan Tolouei, Jean-Benoit Morin, Mohammad Jahazi. 2025 « Modelling and analysis of oxide growth kinetics and thermal effects during heat treatment of a MCLA steel: Comparing gas-fired and electric furnaces ». Canadian Metallurgical Quarterly
Pascale Alison Mekazi Mokué, Antoine Tahan, Lucas Hof. 2025 « A new perspective on measuring manufacturing modularity ». Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Elmira Moosavi-Khoonsari, Riadh Azzaz, Valentin Hurel, Mohammad Jahazi, Samira Ebrahimi Kahou. 2025 « Controlling minor element phosphorus in green electric steelmaking using neural networks ». REWAS 2025 : Circular Economy for the Energy Transition (Las Vegas , NV, USA, Mar. 23-27, 2025) Springer
Musa Muhammed, Mousa Javidani, Majid Heidari, Tom Levasseur, Mohammad Jahazi. 2025 « Effect of substrate roughness on the tribological performance of AlTiN/AlTiCrN-Coated A8 Tool Steel ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
Musa Muhammed, Mousa Javidani, Tahere Ebrahimi Sadrabadi, Majid Heidari, Tom Levasseur, Mohammad Jahazi. 2025 « A comparative wear analysis of tool steels: An evaluation based on ASTM G65 and G195 testing methods ». Journal of Materials Engineering and Performance
Musa Muhammed, Mousa Javidani, Tahere Ebrahimi Sadrabadi, Majid Heidari, Tom Levasseur, Mohammad Jahazi. 2025 « Effect of layered architectural design on the tribological behaviour of AlTiN/AlTiCrN-based cathodic arc evaporated physical vapour deposition coatings ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 56 , nº 7. p. 2513-2536
R. Nikbakht, M. Saadati, H. S. Kim, M. Jahazi, R. R. Chromik. 2025 « Multi-scale analysis of microstructural evolution and atomic bonding mechanisms in CoCrFeMnNi high-entropy alloys upon cold spray impact ». Journal of Materials Science and Technology vol. 208. p. 263-277
Adaiton Oliveira-Filho, Monelle Comeau, James Cave, Charbel Nasr, Pavel Côté, Antoine Tahan. 2025 « Wind turbine SCADA data imbalance: A review of its impact on health condition analyses and mitigation strategies ». Energies vol. 18 , nº 1
Narges Omidi, Manel Houria, Mohamed Meher Monjez, Mohammad Jahazi, Noureddine Barka, Abderrazak El Ouafi. 2025 « Processing parameters optimization for enhanced mechanical strength in PBF-ed H13 tool steel: Minimizing manufacturing defects including microstructural inhomogeneity, sub-surface porosities, and oxide formation ». International Journal of Advanced Manufacturing Technology vol. 136 , nº 5. p. 2681-2706
Narges Omidi, Asim Iltaf, Manel Houria, Mohammad Jahazi, Noureddine Barka, Claude Belzile. 2025 « Enhancing mechanical properties of additively manufactured H13: A two-step approach integrating processing parameters optimization and a tailored heat treatment ». Metals and Materials International vol. 31 , nº 5. p. 1286-1312
R. Paul, B. Pierre, C. S. Zhu, L. Alain, P. Guillaume. 2025 « Thickness gauging using a high-temperature electromagnetic acoustic transducer with optimized magnetic field ». SPIE Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems (Vancouver, BC, Canada, Mar. 17-20, 2025) SPIE
Lida Radan, Victor Songmene, Agnes M. Samuel, Fawzy H. Samuel. 2025 « Effects of Cu and Sc addition and milling conditions on the surface roughness of Al-Li based alloys ». Journal of Materials Engineering and Performance
Lida Radan, Victor Songmene, Agnes M. Samuel, Fawzy H. Samuel. 2025 « Effects of alloy composition, hardness, and milling parameters on the cutting forces of Al-Li-based alloys ». Materials vol. 18 , nº 12
Navneeth Rajakrishnan, Morteza Sadeghifar, Pinaki Bhattacharjee, Henri Champliaud, Mohammad Jahazi. 2025 « Kinetics of austenite formation in a medium-carbon, low-alloy steel with an initial martensite microstructure: Influence of prior austenite grain size ». Journal of Manufacturing and Materials Processing vol. 9 , nº 1
Tony Rasolonirina, Guillaume Painchaud-April, Alain Le Duff, Pierre Belanger. 2025 « Visualization of specular reflections with phase coherence imaging using sub-apertures ». Ultrasonics vol. 155
Morteza Sadeghifar, Rene Billardon, Denis Delagnes, Henri Champliaud, Antoine Tahan, Mohammad Jahazi. 2025 « Addressing viscosity-driven singularities: Accurate development of thermo-elasto-visco-plastic constitutive models ». Mechanics of Time-Dependent Materials vol. 29 , nº 4
Rafik Safarbati, Mohammad Jahazi, Simin Dourandish. 2025 « Full field modeling of austenite grain growth using the level set method ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Gamaliel Salazar, Jean-Sebastien Lemyre-Baron, Mohammad Jahazi, Henri Champliaud, Antoine Tahan. 2025 « Analysis of cooling regimes as a function of Biot number during quenching by immersion ». Heat Transfer
Gamaliel Salazar, Jean-Sébastien Lemyre-Baron, Mohammad Jahazi, Henri Champliaud, Antoine Tahan. 2025 « Analysis of geometry orientation in the calculation of transient heat fluxes during immersion quenching of hollow cylinder ». QDE 2025: Proceedings of the 3rd International Conference on Quenching and Distortion Engineering (Vancouver, BC, Canada, May 06-07, 2025) ASM International
Gamaliel Salazar, Jean-Sébastien Lemyre-Baron, Mohammad Jahazi, Henri Champliaud, Antoine Tahan. 2025 « Determination of thermal boundary conditions using piecewise hermite polynomials during the air transfer step of an industrial quenching process ». Journal of Thermal Science and Engineering Applications vol. 17 , nº 9
T. Sendra, P. Belanger. 2025 « On the use of a Transformer Neural Network to deconvolve ultrasonic signals ». Ultrasonics vol. 152
S. Thibault, P. Bélanger. 2025 « Lite transformer for ultrasonic signal processing ». SPIE Smart Structures + Nondestructive Evaluation (Vancouver, BC, Canada, Mar. 17-20, 2025) SPIE
Aurelien Thon, Guillaume Painchaud-April, Alain Le Duff, Pierre Bélanger. 2025 « U-NET autoencoder for amplitude recovery on binarized Full Matrix Captures ». NDT and E International vol. 156
Ehsan Tolouei, Valentin Hurel, Abdelhalim Loucif, Jean-Benoit Morin, Mohammad Jahazi. 2025 « Influence of the as-quenched state and tempering heating rate on microstructural characteristics of a high-strength steel ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
Ehsan Tolouei, Valentin Hurel, Sajad Mirzaei, Jean-Benoit Morin, Mohammad Jahazi. 2025 « Influence of holding times on the tempering mechanisms of bainitic microstructure ». Materials Science and Technology
Ehsan Tolouei, Mohammad Saadati, Jean -Benoit Morin, Carlos Garcia-Mateo, Mohammad Jahazi. 2025 « Influence of bainitic transformation temperature on microstructure evolution during isothermal holding and subsequent cooling ». Materials Chemistry and Physics vol. 345
Ehsan Tolouei, Mohammad Saadati, Jean-Benoit Morin, Carlos Garcia-Mateo, Mohammad Jahazi. 2025 « Influence of isothermal bainitic phase transformation temperature on the microstructure and hardness evolution of medium-carbon high strength steel ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Mai-Van Tran, Sergio Elizalde, Henri Champliaud, Zhaoheng Liu, Mohammad Jahazi. 2025 « Wrinkling prediction in metal spinning through numerical simulation: Impact of loading rate and mass scaling ». Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Irfan Ullah, Esther Titilayo Akinlabi, Jules Kouam, Victor Songmene. 2025 « A comprehensive experimental investigation on the correlation between chip formation, machined surface integrity, and particle emissions during high-speed milling of TC4 titanium alloy ». International Journal of Advanced Manufacturing Technology vol. 136 , nº 7-8. p. 3285-3301
Kanglin Xing, Ilian A. Bonev, Zhaoheng Liu, Henri Champliaud. 2025 « Influence of vibration and out-of-plane motion on ballbar measurement accuracy ». International Journal of Advanced Manufacturing Technology
Kanglin Xing, Yannick Cianyi, Ilian A. Bonev, Henri Champliaud, Zhaoheng Liu. 2025 « Offline circular path error measurement and compensation for robotic machining applications ». Measurement Science and Technology vol. 36 , nº 10
Kanglin Xing, Miao Feng, Ilian A. Bonev, Henri Champliaud, Mohamed Cheriet, Zhaoheng Liu. 2025 « XGBoost-based digital twin model for predicting trajectory errors in a hexapod coordinated machining system using positioning accuracy and vibration data ». Sensors vol. 25 , nº 23

H. Barakat, Y. Zedan, A. M. Samuel, V. Songmene, F. H. Samuel. 2024 « Parameters controlling drilling and tapping characteristics of aluminum based alloys ». Light Metals (Orlando, FL, USA, Mar. 03-07, 2024) Springer
Helene Bechara, Rony Ibrahim, Antoine Tahan, Ryad Zemouri, Arezki Merkhouf, Bachir Kedjar, Kamal Al-Haddad. 2024 « Unleashing artificial intelligence: Monitoring and diagnosing large hydrogenerators ». IEEE Power and Energy Magazine vol. 22 , nº 6. p. 89-99
Helene Bechara, Rony Ibrahim, Ryad Zemouri, Bachir Kedjar, Arezki Merkhouf, Antoine Tahan, Kamal Al-Haddad. 2024 « Review of artificial intelligence methods for faults monitoring, diagnosis, and prognosis in hydroelectric synchronous generators ». IEEE Access vol. 12. p. 173599-173617
Helene Bechara, Ryad Zemouri, Bachir Kedjar, Arezki Merkhouf, Kamal Al-Haddad, Antoine Tahan. 2024 « Non-invasive detection of rotor inter-turn short circuit in large hydrogenerators by using stray flux measurement combined with convolutional variational autoencoder analysis (CVAE) ». IEEE Transactions on Industry Applications vol. 60 , nº 1. p. 196-205
Pierre Belanger, Daniel Pereira. 2024-01-23 « Ultrasound testing of adhesive bonds ». Brevet américain US 11,879,867.
Abderraouf Benabdesselam, Quentin Dollon, Ryad Zemouri, Francis Pelletier, Martin Gagnon, Antoine Tahan. 2024 « On the use of indirect measurements in virtual sensors for renewable energies: A review ». Electronics vol. 13 , nº 8
Aubin A. Chaboty, Vu-Hieu Nguyen, Guillaume Haiat, Pierre Bélanger. 2024 « Assessment of cortical bone phantom properties using ultrasonic guided waves transduced with a multi-element transducer ». Journal of the Acoustical Society of America vol. 155 , nº 3, Suppl.. p. A288-A289
Aubin Chaboty, Vu-Hieu Nguyen, Guillame Haiat, Pierre Bélanger. 2024 « Cortical bone plate properties assessment using inversion of axially transmitted low frequency ultrasonic guided waves ». Journal of the Acoustical Society of America vol. 156 , nº 2. p. 954-967
Antoine Chrétien, Antoine Tahan, Francis Pelletier. 2024 « Wind turbine blade damage evaluation under multiple operating conditions and based on 10-min SCADA data ». Energies vol. 17 , nº 5
Prashant Dhondapure, Navneeth Rajakrishnan, Soumyaranjan Nayak, Henri Champliaud, Jean-Benoit Morin, Mohammad Jahazi. 2024 « Influence of deformation path on microstructure evolution during the open die forging of large size ingot of high strength steel: Experiments and FE analysis ». International Journal of Advanced Manufacturing Technology vol. 134 , nº 7-8. p. 3733-3750
Simin Dourandish, Henri Champliaud, Jean -Benoit Morin, Mohammad Jahazi. 2024 « Numerical simulation and experimental validation of microstructure evolution during the upsetting process of a large size martensitic stainless steel forging ». International Journal of Material Forming vol. 17 , nº 4
Eslam M. Fayed, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2024 « Effect of microwave hybrid heat treatment on the microstructure and hardness of 3D printed Inconel 718 superalloy ». Canadian Metallurgical Quarterly vol. 63 , nº 2. p. 312-328
Neda Ghodrati, Henri Champliaud, Jean -Benoit Morin, Mohammad Jahazi. 2024 « Influence of the hot-top thermal regime on the severity and extent of macrosegregation in large-size steel ingots ». Journal of Manufacturing and Materials Processing vol. 8 , nº 2
Neda Ghodrati, Patrice Ménard, Jean -Benoit Morin, Mohammad Jahazi. 2024 « Influence of hot top geometry on columnar-to-equiaxed transition in a 12 MT steel ingot ». Journal of Materials Research and Technology vol. 31. p. 3489-3508
Mohamed Imad Eddine Heddar, Brahim Mehdi, Nedjoua Matougui, Souheil Antoine Tahan, Mohammad Jahazi. 2024 « Adaptable multi-objective optimization framework: Application to metal additive manufacturing ». International Journal of Advanced Manufacturing Technology vol. 132 , nº 3-4. p. 1897-1914
Hugo Hervé-Côte, Frederic Dupont-Marillia, Pierre Bélanger. 2024 « Automatic flaw detection in sectoral scans using machine learning ». Ultrasonics vol. 141
Mir Mehrdad Hosseini, Jacques Lanteigne, Carlo Baillargeon, Mohammad Jahazi, Henri Champliaud. 2024 « Development of a flow rule based on a unified plasticity model for 13Cr-4Ni low-carbon martensitic stainless steel subject to post-weld heat treatment ». Metals vol. 14 , nº 7
Rony Ibrahim, Ryad Zemouri, Bachir Kedjar, Arezki Merkhouf, Antoine Tahan, Kamal Al-Haddad, François Lafleur. 2024 « Non-invasive detection of rotor inter-turn short circuit of a hydrogenerator using AI-based variational autoencoder ». IEEE Transactions on Industry Applications vol. 60 , nº 1. p. 28-37
Rony Ibrahim, Ryad Zemouri, Antoine Tahan, Bachir Kedjar, Kamal Al-Haddad, Arezki Merkhouf. 2024 « Rotor fault diagnosis of large hydrogenerators using vibration data and VAE-desirability function ». IECON 2024 - 50th Annual Conference of the IEEE Industrial Electronics Society (Chicago, IL, USA, Nov. 03-06, 2024) IEEE Computer Society
Rony Ibrahim, Ryad Zemouri, Antoine Tahan, Bachir Kedjar, Arezki Merkhouf, Kamal Al-Haddad. 2024 « Fault detection based on vibration measurements and variational autoencoder-desirability function ». IEEE Open Journal of Industry Applications vol. 5. p. 106-116
Moloud Jafari, Joel Grignon, Louis Rivest, Sasan Sattarpanah Karganroudi, Souheil-Antoine Tahan. 2024 « Empirical estimation of measurement uncertainty of indoor GPS (iGPS) system ». Communication lors de la conférence : Canadian Society for Mechanical Engineering International Congress and Computational Fluid Dynamics Canada International Congress (CSME - CFD-SC) (Toronto, ON, Canada, May 26-29, 2024)
Ludovic Jego, Majid Heidari, Muftah Zorgani, Tom Levasseur, Mohammad Jahazi. 2024 « Impact of short-time annealing on AISI 8670 tool steel saw during industrial brazing process ». Next Materials vol. 2
Sagar Jose, Khanh T. P. Nguyen, Kamal Medjaher, Ryad Zemouri, Mélanie Lévesque, Antoine Tahan. 2024 « Advancing multimodal diagnostics: Integrating industrial textual data and domain knowledge with large language models ». Expert Systems with Applications vol. 255 , nº Part D
Sagar Jose, Khanh T. P. Nguyen, Kamal Medjaher, Ryad Zemouri, Mélanie Lévesque, Antoine Tahan. 2024 « Bridging expert knowledge and sensor measurements for machine fault quantification with large language models ». IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) (Boston, MA, USA, July 15-19, 2024) Institute of Electrical and Electronics Engineers Inc.
Sagar Jose, Ryad Zemouri, Khanh T. P. Nguyen, Kamal Medjaher, Antoine Tahan, Mélanie Levesque. 2024 « From fragments to futures: Construction of synthetic run-to-failure trajectories for fault state prognostics ». Prognostics and System Health Management Conference (PHM) (Stockholm, Sweden, May 28-31, 2024) Institute of Electrical and Electronics Engineers Inc.
Wael Mateur, Victor Songmene, Jules Kouam. 2024 « Experimental investigation on the effects of tool geometry and cutting conditions on machining behavior during edge finishing of granite using concave and chamfered profiling tools ». Micromachines vol. 15 , nº 3
Vanella Mbakop Nanshie, Ali Aidibe, Majid Heidari, Mohammad Jahazi. 2024 « Impact of coating and microstructure on wear resistance of tool steels for wood cutting: a novel approach to quantification and analysis of wear-related damages ». Journal of Wood Science vol. 70 , nº 1
Hamza Sofiane Meddas, Muftah Zorgani, Majid Heidari, Mousa Javidani, Tom Levasseur, Mohamed Jahazi. 2024 « Enhanced durability of wood cutting tools through thermal cycling ». Materials vol. 17 , nº 20
Sajad Mirzaei, Nima Bohlooli Arkhazloo, Jean-Benoît Morin, Mohammad Jahazi. 2024 « Influence of heating elements layout on temperature uniformity in a large size heat treatment furnace ». Case Studies in Thermal Engineering vol. 61
A. Momeni, G. R. Ebrahimi, M. Jahazi, H. R. Ezatpour. 2024 « Microstructure characterization and dynamic recrystallization behavior of Ni–Cu alloy during hot deformation ». Mechanics of Materials vol. 193
Nicolas Morin, Quentin Dollon, Jérôme Antoni, Antoine Tahan, Christine Monette, Martin Gagnon. 2024 « Harmonic modal analysis of hydroelectric runner in steady-state conditions: a Bayesian approach ». Mechanics and Industry vol. 25
Musa Muhammed, Mousa Javidani, Tahere Ebrahimi Sadrabadi, Majid Heidari, Tom Levasseur, Mohammad Jahazi. 2024 « A comprehensive review of cathodic arc evaporation physical vapour deposition (CAE-PVD) coatings for enhanced tribological performance ». Coatings vol. 14 , nº 3
Huy Hoan Nguyen, Henri Champliaud, Van Ngan Le. 2024 « Effect of intermediate path on post-wrinkle initiation of the multi-pass metal spinning process: Analysis in the rotating reference frame ». Journal of Manufacturing and Materials Processing vol. 8 , nº 1
Adaiton Oliveira-Filho, Ryad Zemouri, Francis Pelletier, Antoine Tahan. 2024 « Remaining useful life estimation based on the system trajectory in a latent space representation ». Prognostics and System Health Management Conference (PHM) (Stockholm, Sweden, May 28-31, 2024) Institute of Electrical and Electronics Engineers Inc.
Adaiton Oliveira-Filho, Ryad Zemouri, Francis Pelletier, Antoine Tahan. 2024 « System condition monitoring based on a standardized latent space and the nataf transform ». IEEE Access vol. 12. p. 32637-32659
Seong Je Park, Woongbeom Heogh, Jeongho Yang, Sukhyun Kang, Wonjong Jeong, Hoyoung Lee, Tae-Sik Jang, Hyun-Do Jung, Mohammad Jahazi, Seung Chul Han, Hyoung Seop Kim, Myoung-Gyu Lee, Susmita Bose, Amit Bandyopadhyay, Martin Byung-Guk Jun, Young Won Kim, Xingyu Fu, Rigoberto C. Advincula, Clodualdo Aranas, Sang Hoon Kim. 2024 « Meta-structure of amorphous-inspired 65.1Co28.2Cr5.3Mo lattices augmented by artificial intelligence ». Advanced Composites and Hybrid Materials vol. 7 , nº 6
Morteza Sadeghifar, Rene Billardon, Denis Delagnes, Henri Champliaud, Antoine Tahan, Mohammad Jahazi. 2024 « A novel approach for accurate development of the incremental plastic multiplier and consistent tangent operator in thermo-elasto-plastic modeling of materials ». Mechanics of Materials vol. 199
Gamaliel Salazar, Jean-Sebastien Lemyre-Baron, Mohammad Jahazi, Henri Champliaud, Antoine Tahan. 2024 « Identification of thermal boundary conditions during industrial quenching (air transfer + mineralized oil immersion) of a hollow cylinder ». 29th International Federation for Heat Treatment and Surface Engineering World Congress, IFHTSE (Cleveland, OH, USA, Sept. 30-Oct. 03, 2024) ASM International
Ehab Samuel, Agnes M. Samuel, Victor Songmene, Herbert W. Doty, Fawzy H. Samuel. 2024 « Analysis of Ni-Cu interaction in aluminum-based alloys: Hardness, tensile and precipitation behavior ». Materials vol. 17 , nº 18
Ehab Samuel, Agnes M. Samuel, Victor Songmene, Fawzy H. Samuel. 2024 « Effect of casting processes, rare earth metals, and Sr addition on porosity formation in Al-Si cast alloys ». In Recent advancements in aluminum alloys. IntechOpen
Ehab Samuel, Hicham Tahiri, Agnes M. Samuel, Victor Songmene, Fawzy H. Samuel. 2024 « A review on fundamentals of grain refining of Al-Si cast alloys ». In Recent advancements in aluminum alloys. IntechOpen
Ali Tahmasbi, Jean Brice Mandatsy Moungomo, Agnes M. Samuel, Yasser Zedan, Victor Songmene, Fawzy H. Samuel. 2024 « Role of Li and Sc additions and machining conditions on cutting forces on milling behavior of A7075-based alloys ». Journal of Manufacturing and Materials Processing vol. 8 , nº 2
Ehsan Tolouei, Valentin Hurel, Abdelhalim Loucif, Jean-Benoit Morin, Mohammad Jahazi. 2024 « Influence of the as quenched state and tempering temperature on the final microstructure and hardness of a high strength medium carbon steel ». Materials Chemistry and Physics vol. 325
Irfan Ullah, Esther T. Akinlabi, Victor Songmene, Jules Kouam, Morteza Sadeghifar. 2024 « A multiscale finite element modeling for predicting the surface integrity induced by thermo-mechanical loads during high-speed milling of Ti-6Al-4V ». CIRP Journal of Manufacturing Science and Technology vol. 52. p. 246-263
Irfan Ullah, Esther Titilayo Akinlabi, Victor Songmene. 2024 « Thermo-metallo-mechanical based phase transformation modeling for high-speed milling of Ti–6Al–4V through stress-strain and temperature effects ». Journal of Materials Research and Technology vol. 30. p. 894-909
Bhupesh Verma, Pierre Bélanger. 2024 « Surface breaking crack sizing method using pulse-echo Rayleigh waves ». Ultrasonics vol. 138
Kanglin Xing, Ilian A. Bonev, Henri Champliaud, Zhaoheng Liu. 2024 « Optimizing dynamic measurement accuracy for machine tools and industrial robots with unscented Kalman filter and particle swarm optimization methods ». Measurement Science and Technology vol. 35 , nº 8
Kanglin Xing, Ilian A. Bonev, Zhaoheng Liu, Henri Champliaud. 2024 « Application of Taguchi method in optimizing the positioning accuracy measurement using helical path ballbar test ». International Journal of Advanced Manufacturing Technology vol. 134 , nº 11-12. p. 6019-6032
Kanglin Xing, Ilian A. Bonev, Zhaoheng Liu, Henri Champliaud. 2024 « Influence of machining parameters on dynamic errors in a hexapod machining cell ». International Journal of Advanced Manufacturing Technology vol. 131 , nº 3-4. p. 1317-1334
Kanglin Xing, Ilian A. Bonev, Zhaoheng Liu, Henri Champliaud. 2024 « Positioning performance of a hexapod machining cell under machining and nonmachining operations ». Journal of Mechanical Science and Technology vol. 38 , nº 11. p. 6205-6224
Kanglin Xing, J. R. R. Mayer, Ilian A. Bonev, Henri Champliaud, Zhaoheng Liu. 2024 « Evaluation of the positioning accuracy along helical paths using a telescoping ballbar ». ASME Letters in Dynamic Systems and Control vol. 4 , nº 1
Jeongho Yang, Woongbeom Heogh, Hogi Ju, Sukhyun Kang, Tae-Sik Jang, Hyun-Do Jung, Mohammad Jahazi, Seung Chul Han, Seong Je Park, Hyoung Seop Kim, Susmita Bose, Amit Bandyopadhyay, Martin Byung-Guk Jun, Young Won Kim, Dae-kyeom Kim, Rigoberto C. Advincula, Clodualdo Aranas, Sang Hoon Kim. 2024 « Functionally graded structure of a nitride-strengthened Mg2Si-based hybrid composite ». Journal of Magnesium and Alloys vol. 12 , nº 3. p. 1239-1256

Helene Bechara, Arezki Merkhouf, Ryad Zemouri, Bachir Kedjar, Kamal Al Haddad, Antoine Tahan. 2023 « Field winding short circuit fault signature analysis in stray flux of large hydrogenerator ». 6th International Conference on Renewable Energy for Developing Countries (REDEC) (Zouk Mosbeh, Lebanon, July 05-07, 2023) Institute of Electrical and Electronics Engineers
Frederic Bedard, Abdelhalim Loucif, Mohammad Jahazi, Victor Songmene. 2023 « Microstructural damage during electrical discharge machining of a high silicon aluminum alloy for space applications ». International Journal of Advanced Manufacturing Technology vol. 128 , nº 5-6. p. 2311-2317
Sabrine Ben Amor, Floriane Zongo, Ameni Eltaief, Aymen Maatki, Borhen Louhichi, Antoine Tahan. 2023 « A new method to select optimal part building orientation for additive manufacturing processes based on geometric complexity and heat shrinkage ». Progress in Additive Manufacturing vol. 8 , nº 2. p. 211-222
Sevan Bouchy, Ricardo J. Zednik, Pierre Belanger. 2023 « Ultrasonic transducers for in-service inspection and continuous monitoring in high-temperature environments ». Sensors vol. 23 , nº 7
Wafa Bounaouara, Louis Rivest, Antoine Tahan. 2023 « Combining large-scale 3D metrology and mixed reality for assembly quality control in modular construction ». CONVR2023 Proceedings of the 23rd International Conference on Construction Applications of Virtual Reality : Managing the Digital Transformation of Construction Industry (Florence, Italy, Nov. 13-16, 2023) Firenze University Press
Aubin Chaboty, Vu-Hieu Nguyen, Guillame Haiat, Pierre Bélanger. 2023 « Cortical bone properties assessment using axially transmitted low frequency (< 500 kHz) ultrasonic guided waves ». IEEE International Ultrasonics Symposium (IUS) (Montreal, QC, Canada, Sept. 03-08, 2023) IEEE Computer Society
Antoine Chrétien, Antoine Tahan, Philippe Cambron, Adaiton Oliveira-Filho. 2023 « Operational wind turbine blade damage evaluation based on 10-min SCADA and 1 Hz Data ». Energies vol. 16 , nº 7
Prashant Dhondapure, Pierre Tize Mha, Soumyaranjan Nayak, Lea Ebacher, Simin Dourandish, Henri Champliaud, Jean -Benoit Morin, Mohammad Jahazi. 2023 « Influence of deformation path on the stress state and damage evolution along the central axis of a large size forged ingot of AISI H13 steel ». Journal of Materials Research and Technology vol. 27. p. 8244-8257
Q. Dollon, A. Tahan, J. Antoni, M. Gagnon, C. Monette. 2023 « Toward a better understanding of synchronous vibrations in hydroelectric turbines ». Journal of Sound and Vibration vol. 544
Kevin Gildas Dongmo Tambah, Jean-Pierre Kenné, Victor Songmene. 2023 « Preventive maintenance and silica exposure limits integrated in the production planning of a granite processing unit ». Journal of Quality in Maintenance Engineering vol. 29 , nº 1. p. 1-26
Marc-Antoine Drouin, Antoine Tahan. 2023 « 3D imaging systems for optical metrology ». In Handbook of metrology and applications. p. 1293-1318. Springer Nature
Baptiste Gauthier, Guillaume Painchaud-April, Alain Le Duff, Pierre Bélanger. 2023 « Ultrasonic multi-view data merging using the vector coherence factor ». NDT and E International vol. 136
Antoine Geisler, Morteza Sadeghifar, Jean -Benoit Morin, Abdelhalim Loucif, Mohammad Jahazi. 2023 « Void closure during open die forging of large size martensitic stainless-steel ingots: an experimental-analytical-numerical study ». International Journal of Material Forming vol. 16 , nº 1
Abram Girgis, Ehab Samuel, Agnes M. Samuel, Victor Songmene, Fawzy H. Samuel. 2023 « Effect of Cu content on the alloy tensile properties of Al-Cu based alloys tested at 25 degrees C and 250 degrees C: Application of the concept of quality index ». Materials vol. 16 , nº 4
Faiçal Habassi, Manel Houria, Noureddine Barka, Mohammad Jahazi. 2023 « Influence of post-treatment on microstructure and mechanical properties of additively manufactured C300 maraging steel ». Materials Characterization vol. 202
Rony Ibrahim, Antoine Tahan, Bachir Kedjar, Kamal Al-Haddad, Ryad Zemouri, Arezki Merkhouf. 2023 « Vibroacoustic signal-based diagnosis for rotor faults in large synchronous machines - an overview ». 6th International Conference on Renewable Energy for Developing Countries (REDEC) (Zouk Mosbeh, Lebanon, July 05-07, 2023) IEEE
Rony Ibrahim, Ryad Zemouri, Bachir Kedjar, Antoine Tahan, Arezki Merkhouf, Kamal Al-Haddad. 2023 « Rotor fault diagnosis in a hydrogenerator based on the stator vibration and the variational autoencoder ». IEEE International Electric Machines and Drives Conference, IEMDC (San Francisco, CA, USA, May 15-18, 2023) Institute of Electrical and Electronics Engineers
Mahshad Javidikia, Morteza Sadeghifar, Henri Champliaud, Mohammad Jahazi. 2023 « Grain size and temperature evolutions during linear friction welding of Ni-base superalloy Waspaloy: Simulations and experimental validations ». Journal of Advanced Joining Processes vol. 8
Sagar Jose, Khanh T. P. Nguyen, Kamal Medjaher, Ryad Zemouri, Mélanie Lévesque, Antoine Tahan. 2023 « Fault detection and diagnostics in the context of sparse multimodal data and expert knowledge assistance: Application to hydrogenerators ». Computers in Industry vol. 151
Sagar Jose, Ryad Zemouri, Melanie Levesque, Khanh T. P. Nguyen, Antoine Tahan, Kamal Medjaher. 2023 « Informed machine learning for image-data-driven diagnostics of hydrogenerators ». IFAC-PapersOnLine vol. 56 , nº 2. p. 11912-11917
Jean-Benoît Lévesque, Carlo Baillargeon, Daniel Paquet, Jacques Lanteigne, Henri Champliaud. 2023 « Characterizing and modeling transformation-induced plasticity in 13Cr-4Ni welds upon cooling ». Materials vol. 16 , nº 22
Jorge Franklin Mansur Rodrigues Filho, Pierre Bélanger. 2023 « Global total focusing method through digital twin and robotic automation for ultrasonic phased array inspection of complex components ». NDT and E International vol. 137
Mohammad Maroufkhani, Soorosh Hakimian, Alireza Khodabandeh, Iulian Radu, Lucas A. Hof, Mohammad Jahazi. 2023 « Influence of oxygen content in the protective gas on pitting corrosion resistance of a 316l stainless steel weld joint ». Materials vol. 16 , nº 17
Pierre Tize Mha, Prashant Dhondapure, Mohammad Jahazi, Amèvi Tongne, Olivier Pantale. 2023 « Interpolation and extrapolation performance measurement of analytical and ANN-based flow laws for hot deformation behavior of medium carbon steel ». Metals vol. 13 , nº 3
Sajad Mirzaei, Nima Bohlooli Arkhazloo, Farzad Bazdidi-Tehrani, Jean -Benoit Morin, Abdelhalim Loucif, Mohammad Jahazi. 2023 « Influence of spacers and skid sizes on heat treatment of large forgings within an industrial electric furnace ». Energies vol. 16 , nº 7
A. M. A. Mohamed, E. Samuel, A. M. Samuel, F. H. Samuel, V. Songmene, H. W. Doty. 2023 « Effect of intermetallics and tramp elements on porosity formation and hardness of Al-Si-Mg and Al-Si-Cu-Mg alloys ». International Journal of Metalcasting vol. 17 , nº 2. p. 664-681
A. M. A. Mohamed, Y. Zedan, A. M. Samuel, H. W. Doty, V. Songmene, F. H. Samuel. 2023 « Effect of free cutting elements on the microstructural evaluation and mechanical properties of Al–Si cast alloys ». International Journal of Metalcasting vol. 17 , nº 2. p. 959-979
Nathan Molinier, Guillaume Painchaud-April, Alain Le Duff, Matthew Toews, Pierre Bélanger. 2023 « Ultrasonic imaging using conditional generative adversarial networks ». Ultrasonics vol. 133
Musa Muhammed, Mousa Javidani, Majid Heidari, Mohammad Jahazi. 2023 « Enhancing the tribological performance of tool steels for wood-processing applications: A comprehensive review ». Metals vol. 13 , nº 8
Adaiton Oliveira-Filho, Ryad Zemouri, Philippe Cambron, Antoine Tahan. 2023 « Early detection and diagnosis of wind turbine abnormal conditions using an interpretable supervised variational autoencoder model ». Energies vol. 16 , nº 12
Narges Omidi, Pedram Farhadipour, Lamya Baali, Karim Bensalem, Noureddine Barka, Mohammad Jahazi. 2023 « A comprehensive review of additively manufactured H13 tool steel applicable in the injection mold industry: Applications, designs, microstructure, mechanical properties ». JOM vol. 75 , nº 11. p. 4457-4469
Lucas Pereira Piedade, Guillaume Painchaud-April, Alain Le Duff, Pierre Belanger. 2023 « Compressive sensing strategy on sparse array to accelerate ultrasonic TFM imaging ». IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control vol. 70 , nº 6. p. 538-550
Antoine Proteau, Antoine Tahan, Ryad Zemouri, Marc Thomas. 2023 « Predicting the quality of a machined workpiece with a variational autoencoder approach ». Journal of Intelligent Manufacturing vol. 34 , nº 2. p. 719-737
Lida Radan, Victor Songmene, Yasser Zedan, Fawzy H. Samuel. 2023 « Investigating the effect of heat treatment on the microstructure and hardness of aluminum-lithium alloys ». Materials vol. 16 , nº 19
Morteza Sadeghifar, Mahshad Javidikia, Abdelhalim Loucif, Mohammad Jahazi, Victor Songmene. 2023 « Experimental and numerical analyses of residual stress redistributions in large steel dies: Influence of tempering cycles and rough milling ». Journal of Materials Research and Technology vol. 24. p. 395-406
Gamaliel Salazar, Jean-Sébastien Lemyre-Baron, Mohammad Jahazi, Henri Champliaud, Antoine Tahan. 2023 « Analysis of industrial quenching (air transfer + oil immersion) and the cooling regimes after immersion ». Heat Treat 2023: Proceedings of the 32nd ASM Heat Treating Society Conference (Detroit, MI, USA, Oct. 17-19, 2023) ASM International
Agnes M. Samuel, Ehab Samuel, Victor Songmene, Fawzy H. Samuel. 2023 « A comparative study of grain refining of Al-(7–17%) Si cast alloys using Al-10% Ti and Al-4% B master alloys ». Materials vol. 16 , nº 7
Agnes M. Samuel, Ehab Samuel, Victor Songmene, Fawzy H. Samuel. 2023 « A review on porosity formation in aluminum-based alloys ». Materials vol. 16 , nº 5
Ehab Samuel, Agnes M. Samuel, Victor Songmene, Fawzy H. Samuel. 2023 « A review on the analysis of thermal and thermodynamic aspects of grain refinement of aluminum-silicon-based alloys ». Materials vol. 16 , nº 16
Ali Tahmasbi, Agnes M. Samuel, Yasser Zedan, Victor Songmene, Fawzy H. Samuel. 2023 « Effect of aging treatment on the strength and microstructure of 7075-based alloys containing 2% Li and/or 0.12% Sc ». Materials vol. 16 , nº 23
Sandrine A. Tcheuhebou Tina, Mahshad Javidikia, Mohammad Jahazi, Victor Songmene. 2023 « The influence of tool geometry parameters on thermo-mechanical loads and residual stresses induced by orthogonal cutting of AA6061-T6: A numerical investigation ». Processes vol. 11 , nº 4
Aurélien Thon, Guillaume Painchaud-April, Alain Le Duff, Pierre Bélanger. 2023 « Development of a linear array electromagnetic acoustic transducer for shear horizontal guided wave inspection ». NDT and E International vol. 136
Aurelien Thon, Guillaume Painchaud-April, Alain Le Duff, Pierre Bélanger. 2023 « On the use of a linear array EMAT for remote thickness gauging using the reflected modes on a steel pipe ». NDT and E International vol. 139
Pierre Tize Mha, Prashant Dhondapure, Mohammad Jahazi, Amèvi Tongne, Olivier Pantalé. 2023 « Artificial neural network-based critical conditions for the dynamic recrystallization of medium carbon steel and application ». Metals vol. 13 , nº 10
M. Tlija, A. Korbi, B. Louhichi, A. Tahan. 2023 « A computer-aided design-based tolerance analysis of assemblies with form defects and deformations of nonrigid parts ». Journal of Computing and Information Science in Engineering vol. 23 , nº 2
Bhupesh Verma, Pierre Bélanger. 2023 « An alternative Rayleigh wave excitation method using an ultrasonic phased array ». Ultrasonics vol. 135
Kanglin Xing, Ilian A. Bonev, Zhaoheng Liu, Henri Champliaud. 2023 « Ballbar applications for machining and non-machining setups in a hexapod-based machining cell ».
Ryad Zemouri, Rony Ibrahim, Antoine Tahan. 2023 « Hydrogenerator early fault detection: Sparse Dictionary Learning jointly with the Variational Autoencoder ». Engineering Applications of Artificial Intelligence vol. 120

Mohamed H. Abdelaziz, Agnes M. Samuel, Herbert W. Doty, Victor Songmene, Fawzy H. Samuel. 2022 « Mechanical performance and precipitation behavior in Al-Si-Cu-Mg cast alloys: Effect of prolonged thermal exposure ». Materials vol. 15 , nº 8
Sabrine Ben Amor, Floriane Zongo, Borhen Louhichi, Antoine Tahan, Vladimir Brailovski. 2022 « Dimensional deviation prediction model based on scale and material concentration effects for LPBF process ». 1st International Additive Manufacturing Conference, IAM (Lisbon, Portugal, Oct. 19-20, 2022) American Society of Mechanical Engineers
Nima Bohlooli Arkhazloo, Farzad Bazdidi-Tehrani, Mohammad Jadidi, Jean-Benoit Morin, Mohammad Jahazi. 2022 « Determination of temperature distribution during heat treatment of forgings: Simulation and experiment ». Heat Transfer Engineering vol. 43 , nº 12. p. 1041-1064
Riadh Azzaz, Kianoosh Kaveh, Jean-Benoit Morin, Mohammad Jahazi, Elmira Moosavi-Khoonsari. 2022 « Slag characterization regarding refractory wear in EAF steelmaking route ». Affiche présentée lors de la conférence : 61st Annual Conference of Metallurgists (COM) (Montreal, QC, Canada, Aug. 21-24, 2022)
Haithem Bahri, Victor Songmene, Jules Kouam. 2022 « Experimental investigation on part quality and dust emission during minimum quantity lubricated (MQL) edge finishing of granite ». Micromachines vol. 13 , nº 10
H. Bechara, R. Zemouri, A. Tahan, B. Kedjar, A. Merkhouf, K. Al-haddad. 2022 « Non-invasive anomaly diagnosis for hydro electrical generators rotor inter-turn short-circuit detection using stray flux and the VAE ». International Conference on Electrical Machines (ICEM) (Valencia, Spain, Sept. 05-08, 2022) IEEE
Sabrine Ben Amor, Antoine Tahan, Borhen Louhichi. 2022 « The impact of geometric complexity on printing time and cost for additive manufacturing (AM) process ». Advances in Mechanical Engineering and Mechanics II : Selected Papers from the 5th Tunisian Congress on Mechanics, CoTuMe (En ligne, Mar. 22-24, 2021) Springer Science and Business Media Deutschland GmbH
Sevan Bouchy, Ricardo J. Zednik, Pierre Belanger. 2022 « Characterization of the elastic, piezoelectric, and dielectric properties of lithium niobate from 25 degrees C to 900 degrees C using electrochemical impedance spectroscopy resonance method ». Materials vol. 15 , nº 13
Aubin A. Chaboty, Vu-Hieu Nguyen, Salah Naili, Guillaume Haiat, Pierre Bélanger. 2022 « Effect of bone degradation on axially transmitted low frequency (<500 kHz) ultrasonic guided waves ». Journal of the Acoustical Society of America vol. 152 , nº 4_Suppl.. p. A281
Zhang Chunping, Abdelhalim Loucif, Mohammad Jahazi, Jean Benoit Morin. 2022 « FEM simulation of the effect of mold initial temperature on carbon macrosegregation in large-size steel ingots ». 10th International Conference on Material Science and Engineering Technology (ICMSET 2021)), the 5th International Conference on Building Materials and Materials Engineering (ICBMM 2021), and the 6th International Conference on Materials Technology and Ap (Kyoto, Japan - En ligne, Oct. 14-17, 2021) Trans Tech Publications
P. A. Deschênes, R. Wheeler, D. Paquet, J. Lanteigne, A. M. Serventi, L. Tôn-Thât, H. Champliaud. 2022 « Micromechanical properties of low-carbon martensitic stainless steel by microtensile experiments ». Materials Science and Engineering: A vol. 858
Quentin Dollon, Jérôme Antoni, Antoine Tahan, Martin Gagnon, Christine Monette. 2022 « A fast collapsed Gibbs sampler for frequency domain operational modal analysis ». Mechanical Systems and Signal Processing vol. 173
Simin Dourandish, Henri Champliaud, Jean -Benoit Morin, Mohammad Jahazi. 2022 « Microstructure-based finite element modeling of a martensitic stainless steel during hot forging ». International Journal of Advanced Manufacturing Technology vol. 123 , nº 7-8. p. 2833-2851
Frederic Dupont-Marillia, Joseph Krynicki, Pierre Bélanger. 2022 « Early detection of high temperature hydrogen attack using the ultrasonic full matrix capture and advanced post-processing methods ». NDT and E International vol. 130
L. Ebacher, M. Jahazi, J. B. Morin, B. Ritchey. 2022 « Thermomechanical study of H13 hot forged bars ». 4th International Ingot Casting Rolling Forging, ICRF 2022 - Conference Proceedings (Pittsburgh, PA, USA, June 21-23, 2022) Association for Iron and Steel Technology, AISTECH
Shimaa El-Hadad, Agnes M. Samuel, Fawzy H. Samuel, Herbert W. Doty, Victor Songmene. 2022 « Effect of Bi and Ca on the solidification parameters of Sr-Modified Al-S-Cu (Mg) alloys ». Materials vol. 15 , nº 19
Adriana Eres-Castellanos, Muftah Zorgani, Davood Shahriari, Radu Romanica, Jose Antonio Jimenez, Carlos Garcia-Mateo, Mohammad Jahazi. 2022 « Effect of the ausforming deformation mode on bainitic transformation in a medium carbon high silicon steel ». Journal of Materials Research and Technology vol. 18. p. 3428-3442
Eslam M. Fayed, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2022 « Stability of the microstructure and elevated-temperature mechanical properties of additively manufactured Inconel 718 superalloy subjected to long-term in-service thermal cycling ». Materials Science and Engineering: A vol. 838
B. V. Feujofack Kemda, N. Barka, M. Jahazi, D. Osmani. 2022 « Multi-objective optimization of process parameters in resistance spot welding of A36 mild steel and hot dipped galvanized steel sheets using non-dominated sorting genetic algorithm ». Metals and Materials International vol. 28 , nº 2. p. 487-502
Baptiste Gauthier, Guillaume Painchaud-April, Alain Le Duff, Pierre Belanger. 2022 « Lightweight and amplitude-free ultrasonic imaging using single-bit digitization and instantaneous phase coherence ». IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control vol. 69 , nº 5. p. 1763-1774
Neda Ghodrati, Mounir Baiteche, Abdelhalim Loucif, Paloma Isabel Gallego, Morin Jean-Benoit, Mohammad Jahazi. 2022 « Influence of hot top height on macrosegregation and material yield in a large-size cast steel ingot using modeling and experimental validation ». Metals vol. 12 , nº 11
Neda Ghodrati, Abdelhalim Loucif, Jean -Benoit Morin, Mohammad Jahazi. 2022 « Modeling of the influence of hot top design on microporosity and shrinkage cavity in large-size cast steel ingots ». 8th International Congress on the Science and Technology of Steelmaking (Montreal, QC, Canada, Aug. 02-04, 2022) Association for Iron & Steel Technology
J. Hernandez-Sandoval, Y. Zedan, V. Songmene, M. H. Abdelaziz, F. H. Samuel, G. H. Garza-Elizondo. 2022 « Effect of minor addition of Ni and Zr on the high-temperature performance of Al-Si-Cu-Mg cast alloys ». International Journal of Metalcasting vol. 16 , nº 3. p. 1235-1251
Manel Houria, Nedjoua Matougui, Brahim Mehdi, Nabil Kherrouba, Mohammad Jahazi. 2022 « Effect of plastic anisotropy on the kinetics of static softening in AA2024-T3 aluminum alloy ». Metals and Materials International vol. 28. p. 2042-2058
R. Ibrahim, R. Zemouri, A. Tahan, F. Lafleur, B. Kedjar, A. Merkhouf, K. Al-haddad. 2022 « Anomaly detection for large hydrogenerators using the variational autoencoder based on vibration signals ». International Conference on Electrical Machines (ICEM) (Valencia, Spain, Sept. 05-08, 2022) IEEE
Kianoosh Kaveh, Jean-Benoit Morin, Mohammad Jahazi, Elmira Moosavi-Khoonsari. 2022 « Post-mortem study of magnesia-carbon refractory bricks exposed to thermal radiation in electric arc furnace steelmaking ». 8th International Congress on the Science and Technology of Steelmaking (ICS) (Montreal, QC, Canada, Aug. 02-04, 2022) Association for Iron & Steel Technology
M. Kavyani, G. R. Ebrahimi, H. R. Ezatpour, M. Jahazi. 2022 « Microstructure refinement, mechanical and biocorrosion properties of Mg–Zn–Ca–Mn alloy improved by a new severe plastic deformation process ». Journal of Magnesium and Alloys vol. 10 , nº 6. p. 1640-1662
Jules Kouam, Victor Songmene, Ali Bahloul, Agnes M. Samuel. 2022 « Characterization of Si and SiO2 in dust emitted during granite polishing as a function of cutting conditions ». Materials vol. 15 , nº 11
Abdelhalim Loucif, Zhang Chunping, Jean-Benoît Morin, Mohammad Jahazi. 2022 « A FEM analysis on the influence of manganese on carbon and chromium macrosegregation in large size steel ingot ». 10th International Conference on Material Science and Engineering Technology (ICMSET 2021)), the 5th International Conference on Building Materials and Materials Engineering (ICBMM 2021), and the 6th International Conference on Materials Technology and Ap Trans Tech Publications
M. G. Mahmoud, Y. Zedan, A. M. Samuel, H. W. Doty, V. Songmene, F. H. Samuel. 2022 « Effect of rare earth metals (Ce and La) addition on the performance of Al-Si-Cu-Mg Cast Alloys ». International Journal of Metalcasting vol. 16 , nº 3. p. 1164-1190
M. G. Mahmoud, Y. Zedan, A. M. Samuel, V. Songmene, F. H. Samuel. 2022 « The use of rare earth metals in AlSiCu casting alloys ». International Journal of Metalcasting vol. 16 , nº 2. p. 535-552
Mohammad Maroufkhani, Alireza Khodabandeh, Iulian Radu, Mohammad Jahazi. 2022 « Pitting corrosion resistance of the 316L stainless steel welds: influenced of oxygen content in the protective gas ». Canadian Society for Mechanical Engineering International Congress (Alberta, AB, Canada, 7-8 juin 2022) Canadian Society for Mechanical Engineering (CSME)
Mahdi Masoumi Khalilabad, Yasser Zedan, Damien Texier, Mohammad Jahazi, Philippe Bocher. 2022 « Effect of heat treatments on microstructural and mechanical characteristics of dissimilar friction stir welded 2198/2024 aluminum alloys ». Journal of Adhesion Science and Technology vol. 36 , nº 3. p. 221-239
J. Montlahuc, A. Polette, A. Tahan, J. P. Pernot, L. Rivest. 2022 « Multi-source point cloud semantic segmentation using neural network ». 2022 24th ISPRS Congress on Imaging Today, Foreseeing Tomorrow, Commission III (Nice, France, June 06-11, 2022) International Society for Photogrammetry and Remote Sensing
M. Nassar, L. Guizani, M. J. Nollet, A. Tahan. 2022 « Seismic reliability assessment of base-isolated bridges in Quebec ». Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil vol. 49 , nº 2. p. 242-254
Mohamad Nassar, Lotfi Guizani, Marie-José Nollet, Antoine Tahan. 2022 « Effects of temperature, analysis and modelling uncertainties on the reliability of base-isolated bridges in Eastern Canada ». Structures vol. 37. p. 295-304
Daniel Pereira, Alain Le Duff, Guillaume Painchaud-April, Pierre Belanger. 2022 « Simulation-based inversion for the characterization of adhesively bonded joints using ultrasonic guided waves ». IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control vol. 69 , nº 7. p. 2400-2407
Quang Hung Pham, Jérôme Antoni, Antoine Tahan, Martin Gagnon, Christine Monette. 2022 « Simulation of non-Gaussian stochastic processes with prescribed rainflow cycle count using short-time Fourier transform ». Probabilistic Engineering Mechanics vol. 68
Quang Hung Pham, Martin Gagnon, Jérôme Antoni, Antoine Tahan, Christine Monette. 2022 « Prediction of hydroelectric turbine runner strain signal via cyclostationary decomposition and kriging interpolation ». Renewable Energy vol. 182. p. 998-1011
Minh-Nha Pham, Henri Champliaud, Zhaoheng Liu, Ilian A. Bonev. 2022 « Parameterized finite element modeling and experimental modal testing for vibration analysis of an industrial hexapod for machining ». Mechanism and Machine Theory vol. 167
Lucas Pereira Piedade, Guillaume Painchaud-April, Alain Le Duff, Pierre Bélanger. 2022 « Minimum transmission events for fast ultrasonic TFM imaging: A comparative study ». NDT and E International vol. 128
Antoine Proteau, Ryad Zemouri, Antoine Tahan, Marc Thomas, Wafa Bounouara, Stéphane Agnard. 2022 « CNC machining quality prediction using variational autoencoder: A novel industrial 2 TB dataset ». Prognostics and Health Management Conference (PHM-2022 London) (London, UK, May 27-29, 2022) IEEE
Morteza Sadeghifar, Mahshad Javidikia, Victor Songmene, Mohammad Jahazi. 2022 « A comparative analysis of chip shape, residual stresses, and surface roughness in minimum-quantity-lubrication turning with various flow rates ». International Journal of Advanced Manufacturing Technology vol. 121 , nº 5-6. p. 3977-3987
S. Salem, M. Hamed, Y. Zedan, A. M. Samuel, H. W. Doty, V. Songmene, F. H. Samuel. 2022 « Evolution and methods of residual stresses measurement in Al-Si-Cu-Mg Castings : Role of heat treatment ». International Journal of Metalcasting vol. 16 , nº 3. p. 1488-1506
A. M. Samuel, Y. Zedan, H. W. Doty, V. Songmene, F. H. Samuel. 2022 « Role of the addition of La and Ce on the cooling characteristics and porosity formation in A356 and A413 alloys ». International Journal of Metalcasting vol. 16 , nº 2. p. 553-572
Ehab Samuel, Ahmed M. Nabawy, Agnes M. Samuel, Herbert W. Doty, Victor Songmene, Fawzy H. Samuel. 2022 « Effect of Zr and Ti addition and aging treatment on the microstructure and tensile properties of Al-2%Cu-based alloys ». Materials vol. 15 , nº 13
Mahmoud Alipour Sougavabar, Seyed Ali Niknam, Behnam Davoodi, Victor Songmene. 2022 « Milling Al520-MMC reinforced with SiC particles and additive elements Bi and Sn ». Materials vol. 15 , nº 4
Jagannadh Sripada, Yuan Tian, Kanwal Chadha, Gobinda Saha, Mohammad Jahazi, John Spray, Clodualdo Aranas. 2022 « Effect of hot isostatic pressing on microstructural and micromechanical properties of additively manufactured 17–4PH steel ». Materials Characterization vol. 192
Seyedmohammad Tabaie, Farhad Rezai-Aria, Bertrand C. D. Flipo, Mohammad Jahazi. 2022 « Dissimilar linear friction welding of selective laser melted Inconel 718 to forged Ni-based superalloy AD730: Evolution of strengthening phases ». Journal of Materials Science and Technology vol. 96. p. 248-261
Zakaria Ahmed M. Tagiuri, Thien-My Dao, Agnes Marie Samuel, Victor Songmene. 2022 « A numerical model for predicting the effect of tool nose radius on machining process performance during orthogonal cutting of AISI 1045 Steel ». Materials vol. 15 , nº 9
Zakaria Ahmed M. Tagiuri, Thien-My Dao, Agnes Marie Samuel, Victor Songmene. 2022 « Numerical prediction of the performance of chamfered and sharp cutting tools during orthogonal cutting of AISI 1045 steel ». Processes vol. 10 , nº 11
Aurelien Thon, Guillaume Painchaud-April, Alain Le Duff, Pierre Bélanger. 2022 « Optimization of a Lorentz forces EMAT for the reconstruction of the circumferential thickness profile of a steel pipe using high order shear horizontal modes ». NDT and E International vol. 128
Ali Vedaei-Sabegh, Jean-Benoît Morin, Henri Champliaud, Mohammad Jahazi. 2022 « Influence of thermally grown oxides on interfacial friction during hot deformation of large-size forging ingots ». Journal of Materials Research and Technology vol. 21. p. 3412-3424
Ali Vedaei-Sabegh, Jean-Benoît Morin, Mohammad Jahazi. 2022 « Influence of thermally grown oxide layers thickness on temperature evolution during the forging of large size steel ingots ». Materials Chemistry and Physics vol. 275
Y. Zedan, V. Songmene, A. M. Samuel, F. H. Samuel, H. W. Doty. 2022 « Effects of free-cutting elements addition on the microstructure, hardness, and machinability of Al-11%Si-Cu-Mg casting alloys ». International Journal of Metalcasting vol. 16 , nº 4. p. 1915-1931
Yasser Zedan, Guillermo H. Garza-Elizondo, Mahmoud Tash, Agnes M. Samuel, Herbert W. Doty, Victor Songmene, Fawzy Hosny Samuel. 2022 « Effect of intermetallics and drill materials on the machinability of Al-Si cast alloys ». Materials vol. 15 , nº 3
Yasser Zedan, Agnes M. Samuel, Herbert W. Doty, Victor Songmene, Fawzy H. Samuel. 2022 « Effects of trace elements on the microstructural and machinability characteristics of AlSiCuMg castings ». Materials vol. 15 , nº 1
Yasser Zedan, Victor Songmene, Agnes M. Samuel, Fawzy H. Samuel, Herbert W. Doty. 2022 « Assessment of the influence of additives on the mechanical properties and machinability of Al-11%Si cast alloys: Application of DOE and ANOVA methods ». Materials vol. 15 , nº 9
Chunping Zhang, Abdelhalim Loucif, Mohammad Jahazi, Jean-Benoit Morin. 2022 « FE modelling and prediction of macrosegregation patterns in large size steel ingots: Influence of filling rate ». Metals vol. 12 , nº 1
Adaiton Moreira de Oliveira-Filho, Philippe Cambron, Antoine Tahan. 2022 « Condition monitoring of wind turbine main bearing using SCADA data and informed by the principle of energy conservation ». Prognostics and Health Management Conference (PHM-2022 London) (London, UK, May 27-29, 2022) IEEE

Sabrine Ben Amor, Floriane Zongo, Borhen Louhichi, Vladimir Brailovski, Antoine Tahan. 2021 « Classification of dimensional deviation in additive manufacturing LPBF process for AlSi10Mg alloy according to ISO 286 and ANSI B4.2 ». 41st Computers and Information in Engineering Conference, CIE 2021, Held as Part of the ASME 2021 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC-CIE 2021 (En ligne, Aug. 17-19, 2021) American Society of Mechanical Engineers (ASME)
Haithem Bahri, Victor Songmene, Jules Kouam, Agnes Marie Samuel, Fawzy Hosny Samuel. 2021 « CNC edge finishing of granite: Effect of machining conditions on part quality, cutting forces, and particle emissions ». Materials vol. 14 , nº 21
Nima Bohlooli Arkhazloo, Farzad Bazdidi-Tehrani, Jean-Benoît Morin, Mohammad Jahazi. 2021 « Optimization of furnace residence time and loading pattern during heat treatment of large size forgings ». International Journal of Advanced Manufacturing Technology vol. 113 , nº 9-10. p. 2447-2460
Yassine Bouissa, Muftah Zorgani, Davood Shahriari, Henri Champliaud, Jean-Benoît Morin, Mohammad Jahazi. 2021 « Microstructure-based FEM modeling of phase transformation during quenching of large-size steel forgings ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 52 , nº 5. p. 1883-1900
Samuel Brodeur, Van Ngan Le, Henri Champliaud. 2021 « A nonlinear finite-element analysis tool to prevent rupture of power transformer tank ». Sustainability vol. 13 , nº 3
Aubin Chaboty, Frédéric Dupont-Marillia, Pierre Bélanger. 2021 « Propagation of low frequency ultrasonic guided waves through welded lap joint ». Journal of Nondestructive Evaluation vol. 40 , nº 2
K. Chadha, C. Aranas, M. Jahazi. 2021 « Effect of double hit hot deformation on the evolution of dynamically transformed ferrite ». Metals and Materials International vol. 27 , nº 11. p. 4307-4321
Arthur Chapon, Daniel Pereira, Matthew Toews, Pierre Belanger. 2021 « Deconvolution of ultrasonic signals using a convolutional neural network ». Ultrasonics vol. 111
Q. Chatenet, E. Remy, M. Gagnon, M. Fouladirad, A. S. Tahan. 2021 « Modeling cavitation erosion using non-homogeneous gamma process ». Reliability Engineering and System Safety vol. 213
Quentin Chatenet, Antoine S. Tahan, Mitra Fouladirad, Martin Gagnon, Emmanuel Remy. 2021 « Maintenance strategies comparison for francis turbine runner subjected to cavitation ». Sustainability vol. 13 , nº 19
B. Danouj, S. A. Tahan, E. David, M. Lotfi. 2021 « Partial discharges location in power transformers using piezoceramic sensors ». International Journal of Electrical and Computer Engineering vol. 11 , nº 3. p. 1942-1950
Q. Dollon, J. Antoni, A. Tahan, M. Gagnon, C. Monette. 2021 « Operational Modal Analysis of hydroelectric turbines using an order based likelihood approach ». Renewable Energy vol. 165. p. 799-811
Q. Dollon, C. Monette, M. Gagnon, A. Tahan, J. Antoni. 2021 « Calibration of critical speed predictions using experimental measurements ». 30th IAHR Symposium on Hydraulic Machinery and Systems (IAHR) (Lausanne, Switzerland, Mar. 21-26, 2021) IOP Publishing
S. Dourandish, M. Jahazi, G. R. Ebrahimi, L. Ebacher. 2021 « Influence of eutectic phase precipitation on cracking susceptibility during forging of a martensitic stainless steel for turbine shaft applications ». Journal of Materials Research and Technology vol. 13. p. 260-270
Frederic Dupont-Marillia, Mohammad Jahazi, Pierre Belanger. 2021 « Phased array probe for the inspection of large steel forgings ». Cogent Engineering vol. 8 , nº 1
Tarek Elgnemi, Victor Songmene, Jules Kouam, Martin B. G. Jun, Agnes Marie Samuel. 2021 « Experimental investigation on dry routing of CFRP composite: Temperature, forces, tool wear, and fine dust emission ». Materials vol. 14 , nº 19
Tarek-Shaban-Mohamed Elgnemi, Martin Byung-Guk Jun, Victor Songmene, Agnes Marie Samuel. 2021 « Milling performance of CFRP composite and atomised vegetable oil as a function of fiber orientation ». Materials vol. 14 , nº 8
Adriana Eres-Castellanos, Javier Hidalgo, Muftah Zorgani, Mohammad Jahazi, Isaac Toda-Caraballo, Francisca G. Caballero, Carlos Garcia-Mateo. 2021 « Assessing the scale contributing factors of three carbide-free bainitic steels: A complementary theoretical and experimental approach ». Materials and Design vol. 197
Eslam M. Fayed, Mohammad Saadati, Davood Shahriari, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2021 « Effect of homogenization and solution treatments time on the elevated-temperature mechanical behavior of Inconel 718 fabricated by laser powder bed fusion ». Scientific Reports vol. 11 , nº 1
Eslam M. Fayed, Mohammad Saadati, Davood Shahriari, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2021 « Optimization of the post-process heat treatment of inconel 718 superalloy fabricated by laser powder bed fusion process ». Metals vol. 11 , nº 1
B. V. Feujofack Kemda, N. Barka, M. Jahazi, D. Osmani. 2021 « Modeling of phase transformation kinetics in resistance spot welding and investigation of effect of post weld heat treatment on weld microstructure ». Metals and Materials International vol. 27 , nº 5. p. 1205-1223
Jorge Franklin Mansur Rodrigues Filho, Pierre Bélanger. 2021 « Probe standoff optimization method for phased array ultrasonic TFM imaging of curved parts ». Sensors vol. 21 , nº 19
Baptiste Gauthier, Guillaume Painchaind-April, Alain Le Duff, Pierre Bélanger. 2021 « Performances evaluation of instantaneous frequency imaging for specular reflectors and multi-view ultrasonic inspection ». Communication lors de la conférence : 48th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE) (En ligne, July 28-30, 2021)
Baptiste Gauthier, Guillaume Painchaud-April, Alain Le Duff, Pierre Bélanger. 2021 « Towards an alternative to time of flight diffraction using instantaneous phase coherence imaging for characterization of crack-like defects ». Sensors vol. 21 , nº 3
Shreyank Gupta, Guillame Haiat, Catherine Laporte, Pierre Belanger. 2021 « Effect of the acoustic impedance mismatch at the bone-soft tissue interface as a function of frequency in transcranial ultrasound: A simulation and in-vitro experimental study ». IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control vol. 68 , nº 5. p. 1653-1663
Mahshad Javidikia, Morteza Sadeghifar, Victor Songmene, Mohammad Jahazi. 2021 « 3D FE modeling and experimental analysis of residual stresses and machining characteristics induced by dry, MQL, and wet turning of AA6061-T6 ». Machining Science and Technology vol. 25 , nº 6. p. 957-983
Mahshad Javidikia, Morteza Sadeghifar, Victor Songmene, Mohammad Jahazi. 2021 « Analysis and optimization of surface roughness in turning of AA6061-T6 under various environments and parameters ». 9th CIRP Conference on High Performance Cutting (En ligne, May 24-26, 2021) Elsevier
Mahshad Javidikia, Morteza Sadeghifar, Victor Songmene, Mohammad Jahazi. 2021 « Low and high speed orthogonal cutting of AA6061-T6 under dry and flood-coolant modes: Tool wear and residual stress measurements and predictions ». Materials vol. 14 , nº 15
Makarim Khan, Davood Shahriari, Mohammad Jahazi, Jean-Benoit Morin. 2021 « Interactions between dynamic softening and strengthening mechanisms during hot forging of a high-strength steel ». Frontiers in Mechanical Engineering vol. 7
Yunsang Kwak, Vu-Hieu Nguyen, Yoann Hériveaux, Pierre Belanger, Junhong Park, Guillaume Haïat. 2021 « Ultrasonic assessment of osseointegration phenomena at the bone-implant interface using convolutional neural network ». Journal of the Acoustical Society of America vol. 149 , nº 6. p. 4337-4347
Thibault Latête, Baptiste Gauthier, Pierre Belanger. 2021 « Towards using convolutional neural network to locate, identify and size defects in phased array ultrasonic testing ». Ultrasonics vol. 115
J. H. Liu, N. Binot, D. Delagnes, M. Jahazi. 2021 « Influence of the cooling rate below Ms on the martensitic transformation in a low alloy medium-carbon steel ». Journal of Materials Research and Technology vol. 12. p. 234-242
Abdelhalim Loucif, Jean Benoit Morin, Louis Philippe Lapierre-Boire, Mohammad Jahazi. 2021 « Subsurface crack initiation and propagation in an open dieforged high strength steel: A microstructural analysis ». 9th International Conference on Engineering and Innovative Materials (ICEIM 2020) (Singapor, Singapor, Sept. 4-6, 2020) Trans Tech Publications Ltd
Mohsen Marani, Mohammadjavad Zeinali, Victor Songmene, Chris K. Mechefske. 2021 « Tool wear prediction in high-speed turning of a steel alloy using long short-term memory modelling ». Measurement: Journal of the International Measurement Confederation vol. 177. p. 704-713
Alliche Mohamed-Amine, Djennane Mohamed, Djebara Abdelhakim, Victor Songmene. 2021 « Predictive analytical modeling of thermo-mechanical effects in orthogonal machining ». Materials vol. 14 , nº 24
Roghayeh Nikbakht, Mohammad Saadati, Taek-Soo Kim, Mohammad Jahazi, Hyoung Seop Kim, Bertrand Jodoin. 2021 « Cold spray deposition characteristic and bonding of CrMnCoFeNi high entropy alloy ». Surface and Coatings Technology vol. 425
Oluwole Olufayo, Victor Songmene, Jean-Pierre Kenné, Michael Ayomoh. 2021 « Modelling for cost and productivity optimisation in sustainable manufacturing: a case of dry versus wet machining of mould steels ». International Journal of Production Research vol. 59 , nº 17. p. 5352-5371
P. Y. Paradis, H. Champliaud. 2021 « New correlations for heat transfer in parallel-plate ducts at low Peclet number ». International Journal of Heat and Mass Transfer vol. 178
Quang Hung Pham, Martin Gagnon, Jérôme Antoni, Antoine Tahan, Christine Monette. 2021 « Rainflow-counting matrix interpolation over different operating conditions for hydroelectric turbine fatigue assessment ». Renewable Energy vol. 172. p. 465-476
Lucas Pereira Piedade, Guillaume Painchaind-April, Alain Le Duff, Pierre Bélanger. 2021 « Minimum transmission events for fast ultrasonic imaging using sparse-TFM approaches ». Communication lors de la conférence : 48th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE) (En ligne, July 28-30, 2021)
Pham Quang Hung, Martin Gagnon, Jérôme Antoni, Antoine Tahan, Christine Monette. 2021 « A proposal for the dynamic strain interpolation on hydroelectric turbine runner ». 30th IAHR Symposium on Hydraulic Machinery and Systems (IAHR) (Lausanne, Switzerland, Mar. 21-26, 2021) IOP Publishing
Jorge Franklin Mansur Rodrigues Filho, Pierre Bélanger. 2021 « Improved ultrasonic phased array transmission through concave surfaces ». Communication lors de la conférence : 48th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE) (En ligne, July 28-30, 2021)
Agnes Samuel, Yasser Zedan, Herbert Doty, Victor Songmene, Fawzy H. Samuel. 2021 « A review study on the main sources of porosity in Al-Si cast alloys ». Advances in Materials Science and Engineering vol. 2021
Mondher Souilah, Antoine Tahan, Nabil Abacha. 2021 « A small displacement torsor model to evaluate machining accuracy in the presence of locating and machine geometric errors ». Proceedings of the Canadian Society for Mechanical Engineering International Congress 2021 (Charlottetown, PE, Canada, June 27-30, 2021)
Seyedmohammad Tabaie, Farhad Rezai-Aria, Bertrand C. D. Flipo, Jonathan Cormier, Mohammad Jahazi. 2021 « Post-weld heat treatment of additively manufactured inconel 718 welded to forged ni-based superalloy AD730 by linear friction welding ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 52 , nº 8. p. 3475-3488
Seyedmohammad Tabaie, Farhad Rézaï-Aria, Bertrand C. D. Flipo, Mohammad Jahazi. 2021 « Grain size and misorientation evolution in linear friction welding of additively manufactured IN718 to forged superalloy AD730™ ». Materials Characterization vol. 171
Aurelien Thon, Alain Le Duff, Guillaume Painchaind-April, Pierre Bélanger. 2021 « Reconstruction of the remnant thickness circumferential profile of a steel pipe using high order shear horizontal waves and emats ». Communication lors de la conférence : 48th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE) (En ligne, July 28-30. 2021)
Dinh Son Tran, Victor Songmene, Anh Dung Ngo. 2021 « Regression and ANFIS-based models for predicting of surface roughness and thrust force during drilling of biocomposites ». Neural Computing and Applications vol. 33. p. 11721-11738
Bhupesh Verma, Jorge Franklin Mansur Rodrigues Filho, Pierre Bélanger. 2021 « Rayleigh wave excitation method using ultrasonic phased arrays for the detection of surface cracks ». Communication lors de la conférence : 48th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE) (En ligne, July 28-30, 2021)
Yasser Zedan, Keyhan Jabbari, Seyed A. Niknam, Victor Songmene. 2021 « Machinability study of AA6061 under various heat treatment conditions ». Iranian Journal of Science and Technology - Transactions of Mechanical Engineering vol. 45. p. 543-553
M. Zorgani, C. Garcia-Mateo, M. Jahazi. 2021 « Effects of ausforming temperature on carbide-free bainite transformation and its correlation to the transformation plasticity strain in a medium C- Si-rich steel ». Materials Characterization vol. 176
M. Zorgani, C. Garcia-Mateo, M. Jahazi. 2021 « Microstructural evolution during tempering of an ausformed carbide-free low temperature bainitic steel ». Materials and Design vol. 210

M. Zaid Ahmed, K. Chadha, S. R. Reddy, D. Shahriari, P. P. Bhattacharjee, M. Jahazi. 2020 « Influence of process parameters on microstructure evolution during hot deformation of a Eutectic High-Entropy Alloy (EHEA) ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 51 , nº 12. p. 6406-6420
Ali Aidibe, Souheil Antoine Tahan, Mojtaba Kamali Nejad. 2020 « Interlaboratory empirical reproducibility study based on a GD&T benchmark ». Applied Sciences vol. 10 , nº 14
Alireza Aleyari, Omid Majidi, Nicolas Bombardier, Xuan-Tan Pham, Mohammad Jahazi. 2020 « Finite element and experimental analysis of the preheating stage of High Speed Blow Forming (HSBF) process ». Journal of Manufacturing Processes vol. 49. p. 10-17
Augias Anagonou, Thierry Godjo, Victor Songmene, Yvette Tankpinou. 2020 « Étude des propriétés physico-mécaniques d’un béton hydraulique contenant des cendres de coques d’anacarde de tailles micrométriques et nanométriques substituant partiellement le ciment ». Déchets Sciences et Techniques , nº 83. p. 39-48
Augias Anagonou, Victor Songmene, Thierry Godjo, Jules Kouam. 2020 « Recycling of West african cashew nut shells waste in asphalt concrete: Impact on the physico-mechanical properties of asphalt concrete ». International Journal of Advanced Research and Publications vol. 4 , nº 2. p. 96-106
Kaveh Babanezhad, Ali Aidibe, Gilles Foucault, Antoine Tahan, Jean Bigeon. 2020 « Improved Bi-Criterion flexible registration for fixtureless inspection of compliant parts ». Precision Engineering vol. 65. p. 116-129
Mounia Berdai, Antoine Tahan, Martin Gagnon. 2020 « Reproducibility investigation of elicitation techniques in risk assessment for hydraulic turbines ». Journal of Risk Research vol. 23 , nº 3. p. 297-312
Olivier Blancke, Dragan Komljenovic, Antoine Tahan, Normand Amyot, Claude Hudon, Jean-François Boudreau, Mélanie Lévesque. 2020 « From data to asset health management in the context of hydropower generation: A holistic concept ». Engineering Assets and Public Infrastructures in the Age of Digitalization : Proceedings of the 13th World Congress on Engineering Asset Management (Stavanger, Norway, Sept. 24-26, 2018) Springer International Publishing
Guillaume Boivin, Pierre Bélanger, Ricardo J. Zednik. 2020 « Characterization of pure face-shear strain in piezoelectric alpha-tellurium dioxide (alpha-TeO2) ». Crystals vol. 10 , nº 10
Y. Bouissa, N. Bohlooli, D. Shahriari, H. Champliaud, J. B. Morin, M. Jahazi. 2020 « FEM modeling and experimental validation of quench-induced distortions of large size steel forgings ». Journal of Manufacturing Processes vol. 58. p. 592-605
Frédéric Bédard, Mohammad Jahazi, Victor Songmene. 2020 « Die-sinking EDM of Al6061-T6: interactions between process parameters, process performance, and surface characteristics ». International Journal of Advanced Manufacturing Technology vol. 107 , nº 1-2. p. 333-342
Thiago Bruno Carneiro, Samuel Filgueiras Rodrigues, Clodualdo Aranas, Fulvio Siciliano, Eden Santos Silva, Gedeon Silva Reis, Edson Jansen Pedrosa Miranda, Valdemar Silva Leal, Mohammad Jahazi, John Joseph Jonas. 2020 « Retransformation of dynamically induced ferrite during physical simulation of Steckel mill hot rolling ». Journal of Materials Research and Technology vol. 9 , nº 5. p. 10254-10264
K. Chadha, C. Aranas, D. Shahriari, M. Jahazi, J. G. Spray. 2020 « The effect of retained work hardening on the driving force for dynamic transformation ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 51 , nº 11. p. 5617-5622
Oussama Chaieb, Oluwole A. Olufayo, Victor Songmene, Mohammad Jahazi. 2020 « Investigation on surface quality of a rapidly solidified Al–50%Si alloy component for deep-space applications ». Materials vol. 13 , nº 15
A. Chamanfar, S. M. Chentouf, M. Jahazi, L. P. Lapierre-Boire. 2020 « Austenite grain growth and hot deformation behavior in a medium carbon low alloy steel ». Journal of Materials Research and Technology vol. 9 , nº 6. p. 12102-12114
Quentin Chatenet, Mitra Fouladirad, Emmanuel Remy, Martin Gagnon, Laurent Tôn-Thât, Antoine Tahan. 2020 « On the performance of the maximum likelihood estimation method for gamma process ». 29th European Safety and Reliability Conference (ESREL) (Hannover, Germany, Sept. 22-26, 2019) Research Publishing Services
Quentin Chatenet, Martin Gagnon, Emmanuel Remy, Mitra Fouladirad, Antoine Tahan. 2020 « Stochastic modeling of cavitation erosion in francis runner ». International Journal of Fluid Machinery and Systems vol. 13 , nº 1. p. 21-29
M. Chegini, M. R. Aboutalebi, S. H. Seyedein, G. R. Ebrahimi, M. Jahazi. 2020 « Study on hot deformation behavior of AISI 414 martensitic stainless steel using 3D processing map ». Journal of Manufacturing Processes vol. 56. p. 916-927
Jawad Dahmani, Catherine Laporte, Daniel Pereira, Pierre Bélanger, Yvan Petit. 2020 « Predictive model for designing soft-tissue mimicking ultrasound phantoms with adjustable elasticity ». IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control vol. 67 , nº 4. p. 715-726
Eslam M. Fayed, Davood Shahriari, Mohammad Saadati, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2020 « Influence of homogenization and solution treatments time on the microstructure and hardness of Inconel 718 fabricated by laser powder bed fusion process ». Materials vol. 13 , nº 11
B. V. Feujofack Kemda, Noureddine Barka, M. Jahazi, D. Osmani. 2020 « Optimization of resistance spot welding process applied to A36 mild steel and hot dipped galvanized steel based on hardness and nugget geometry ». International Journal of Advanced Manufacturing Technology vol. 106 , nº 5-6. p. 2477-2491
Mahshad Javidikia, Morteza Sadeghifar, Victor Songmene, Mohammad Jahazi. 2020 « 3D Finite element simulation of residual stresses induced by wet turning of AA6061-T6 ». Affiche présentée lors de la conférence : 17th Encyclopaedia Archives Encyclopaedia of Research on Aluminium in Québec REGAL Students' Day = 17e Encyclopédie de la Recherche sur l’Aluminium au Québec : Journée des étudiants du REGAL (En ligne, Nov. 05-06, 2020)
Mahshad Javidikia, Morteza Sadeghifar, Victor Songmene, Mohammad Jahazi. 2020 « Effect of turning environments and parameters on surface integrity of AA6061-T6: experimental analysis, predictive modeling, and multi-criteria optimization ». International Journal of Advanced Manufacturing Technology vol. 110 , nº 9. p. 2669-2683
Mahshad Javidikia, Morteza Sadeghifar, Victor Songmene, Mohammad Jahazi. 2020 « On the impacts of tool geometry and cutting conditions in straight turning of aluminum alloys 6061-T6: an experimentally validated numerical study ». International Journal of Advanced Manufacturing Technology vol. 106 , nº 9-10. p. 4547–4565
G. Kahwati, A. Tahan, A. Merkhouf, C. Hudon, K. Al-Haddad. 2020 « Reliability index for health monitoring of hydroelectric synchronous machine's insulation ». 2020 International Conference on Electrical Machines (Gothenburg, Sweden, Aug. 23-26, 2020) IEEE
Thibaud Lamothe, Michel Blain, Martin Gagnon, Jérôme Lonchampt, Antoine Tahan. 2020 « Technico-economic modelling of maintenance cost for hydroelectric turbine runners ». Engineering Assets and Public Infrastructures in the Age of Digitalization : Proceedings of the 13th World Congress on Engineering Asset Management (Stavanger, Norway, Sept. 24-26, 2018) Springer International Publishing
Abdelhalim Loucif, Chunping Zhang, Mohammad Jahazi, Louis-Philippe Lapierre-Boire. 2020 « Macrosegregation characteristics of ferrite and austenite stabilizer elements in large size high strength steel ingot ». 8th International Conference on Engineering and Innovative Materials (ICEIM 2019) (Tokyo, Japan, Sept. 06-08, 2019) Trans Tech Publications Ltd
J. B. Lévesque, J. Lanteigne, H. Champliaud, D. Paquet. 2020 « Modeling solid-state phase transformations of 13Cr-4Ni steels in welding heat-affected zone ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 51 , nº 3. p. 1208-1220
Mohsen Marani, Victor Songmene, Mohammadjavad Zeinali, Jules Kouam, Yasser Zedan. 2020 « Neuro-fuzzy predictive model for surface roughness and cutting force of machined Al20 Mg2Si2Cu metal matrix composite using additives ». Neural Computing and Applications vol. 32. p. 8115-8126
Mohsen Marani, Mohammadjavad Zeinali, Jules Kouam, Victor Songmene, Chris K. Mechefske. 2020 « Prediction of cutting tool wear during a turning process using artificial intelligence techniques ». International Journal of Advanced Manufacturing Technology vol. 111 , nº 1-2. p. 505-515
Hossein Monajati, Mariem Zoghlami, Amevi Tongne, Mohammad Jahazi. 2020 « Assessing microstructure-local mechanical properties in friction stir welded 6082-T6 aluminum alloy ». Metals vol. 10 , nº 9
Huy Hoan Nguyen, Henri Champliaud, Van Ngan Lê. 2020 « Circumferential cracking in conventional metal spinning process ». 32nd European Modeling and Simulation Symposium (EMSS) (En ligne, Sept. 16-18, 2020) Dime University of Genoa
Oluwole A. Olufayo, Mouhamed Dhafer Boulaares, Victor Songmene. 2020 « Machining/machinability of Rene 65 superalloy for aerospace applications ». IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT) (Cape town, South Africa, Jan. 20-22, 2020) IEEE
Daniel Pereira, Julio Fernandes, Pierre Belanger. 2020 « Ex vivo assessment of cortical bone properties using low-frequency ultrasonic guided waves ». IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control vol. 67 , nº 5. p. 910-922
Antoine Proteau, Ryad Zemouri, Antoine Tahan, Marc Thomas. 2020 « Dimension reduction and 2D-visualization for early change of state detection in a machining process with a variational autoencoder approach ». International Journal of Advanced Manufacturing Technology vol. 111 , nº 11-12. p. 3597-3611
Morteza Sadeghifar, Mahshad Javidikia, Victor Songmene, Mohammad Jahazi. 2020 « Finite element simulation-based predictive regression modeling and optimum solution for grain size in machining of Ti6Al4V alloy: Influence of tool geometry and cutting conditions ». Simulation Modelling Practice and Theory vol. 104
Mohamed Nejib Saidi, Abdelhakim Djebara, Victor Songmene, Ali Bahloul. 2020 « Experimental evaluation of three local exhaust ventilation systems designed to reduce ultrafine dust emission during a polishing process ». Aerosol Science and Engineering vol. 4 , nº 1. p. 9-17
Sheida Sarafan, Priti Wanjara, Jean-Benoit Levesque, Javad Gholipour, Henri Champliaud, Louis Mathieu. 2020 « Through-thickness residual stresses, microstructure, and mechanical properties of electron beam-welded CA6NM martensitic stainless steel after postweld heat treatment ». Advances in Materials Science and Engineering vol. 2020
Ahad Shafiee, Mahmoud Nili-Ahmadabadi, Hyoung Seop Kim, Mohammad Jahazi. 2020 « Development and microstructural characterization of a new wrought high entropy superalloy ». Metals and Materials International vol. 26 , nº 5. p. 591-602
Mohamed Shnfir, J. Kouam, V. Songmene. 2020 « Ultrafine particle emission during high-speed milling of hardened AISI 1045 steel ». International Journal of Advanced Manufacturing Technology vol. 110 , nº 3-4. p. 617-627
V. Songmene, O. A. Olufayo. 2020 « Advances in fine and ultrafine particles emission and dispersion in machining: Cases of metals and granite ». Proceedings of 2020 IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT) (Cape town, South Africa, Jan. 20-22, 2020) IEEE
S. Tabaie, F. Rézaï-Aria, M. Jahazi. 2020 « Effect of pre-heat treatment on micro-segregation of nb in the microstructure of linear friction welded inconel 718 fabricated by selective laser melting ». Affiche présentée lors de la conférence : Conference of Metallurgists (Toronto, ON, Canada, Aug. 24-27, 2020)
Seyedmohammad Tabaie, Farhad Rézaï-Aria, Mohammad Jahazi. 2020 « Microstructure evolution of selective laser melted inconel 718: Influence of high heating rates ». Metals vol. 10 , nº 5
Dinh Son Tran, Victor Songmene, Anh Dung Ngo, Jules Kouam. 2020 « Effects of reinforcements and cutting parameters on machinability of polypropylene-based biocomposite reinforced with biocarbon particles and chopped miscanthus fibers ». International Journal of Advanced Manufacturing Technology vol. 110 , nº 11-12. p. 3423-3444
Dinh Son Tran, Victor Songmene, Anh Dung Ngo, Jules Kouam, Arturo Rodriguez-Uribe, Manjusri Misra, Amar Kumar Mohanty. 2020 « Experimental investigation on machinability of polypropylene reinforced with miscanthus fibers and biochar ». Materials vol. 13 , nº 5
Ali Vedaei-Sabegh, Jean-Benoit Morin, Mohammad Jahazi. 2020 « Influence of nickel on high-temperature oxidation and characteristics of oxide layers in two high-strength steels ». Steel Research International vol. 91 , nº 4
Geoffrey Veit, Pierre Bélanger. 2020 « An ultrasonic guided wave excitation method at constant phase velocity using ultrasonic phased array probes ». Ultrasonics vol. 102
Ali Yeganefar, Seyed Ali Niknam, Victor Songmene. 2020 « Machinability study of aircraft series aluminium alloys 7075-T6 and 7050-T7451 ». Transactions of the Canadian Society for Mechanical Engineering vol. 44 , nº 3. p. 427-439
Ryad Zemouri, Melanie Levesque, Normand Amyot, Claude Hudon, Olivier Kokoko, Souheil Antoine Tahan. 2020 « Deep convolutional variational autoencoder as a 2D-visualization tool for partial discharge source classification in hydrogenerators ». IEEE Access vol. 8. p. 5438-5454
C. Zhang, M. Jahazi, R. Tremblay. 2020 « Simulation and experimental validation of the effect of superheat on macrosegregation in large-size steel ingots ». International Journal of Advanced Manufacturing Technology vol. 107 , nº 1-2. p. 167-175
Chunping Zhang, Mohammad Jahazi, Paloma Isabel Gallego. 2020 « On the impact of microsegregation model on the thermophysical and solidification behaviors of a large size steel ingot ». Metals vol. 10 , nº 1
Floriane Zongo, Charles Simoneau, Anatolie Timercan, Antoine Tahan, Vladimir Brailovski. 2020 « Geometric deviations of laser powder bedfused AlSi10Mg components: numerical predictions versus experimental measurements ». International Journal of Advanced Manufacturing Technology vol. 107. p. 1411-1436
M. Zorgani, Carlos Garcia-Mateo, M. Jahazi. 2020 « The role of ausforming in the stability of retained austenite in a medium-C carbide-free bainitic steel ». Journal of Materials Research and Technology vol. 9 , nº 4. p. 7762-7776

Fatemeh Aghazadeh, Antoine Tahan, Marc Thomas. 2019 « Tool condition monitoring method in milling process using wavelet transform and long short-term memory ». SURveillance VIbrations SHocks NOise : Book of Proceedings : SURVISHNO (Lyon, France, July 08-10, 2019) INSA
J. Ajaja, W. Jomaa, P. Bocher, R. R. Chromik, V. Songmene, M. Brochu. 2019 « Hard turning multi-performance optimization for improving the surface integrity of 300M ultra-high strength steel ». International Journal of Advanced Manufacturing Technology vol. 104 , nº 1-4. p. 141-157
Ashwaq A. Al-Hashedi, Marco Laurenti, Mohamed Amine Mezour, Tayebeh Basiri, Heithem Touazine, Mohamed Jahazi, Faleh Tamimi. 2019 « Advanced inorganic nanocomposite for decontaminating titanium dental implants ». Journal of Biomedical Materials Research - Part B Applied Biomaterials vol. 107 , nº 3. p. 761-772
Sabrine BEN Amor, Antoine Tahan, Borhen Louhichi. 2019 « Proposition of a geometric complexity model for additive manufacturing process based on CAD ». 23rd International Conference Information Visualisation (IV) (Paris, France, July 02-05, 2019) IEEE Computer Society
Kaveh Babanezhad, Gilles Foucault, Vahid Sabri, Antoine Tahan, Jean Bigeon. 2019 « The fixtureless inspection of flexible parts based on semi-geodesic distance ». Precision Engineering vol. 59. p. 174-184
Ali Bahloul, Abdelhakim Djebara, Mohamed Nejib Saidi, Victor Songmene, Fernando Villalpando, Marcelo Reggio. 2019 « Computational and experimental analysis of ultrafine particle dispersion during granite polishing ». Aerosol Science and Engineering vol. 3 , nº 1. p. 21-31
Ali Bahloul, Rafael Francisco Jorge Vanterpool, Abdelhakim Djebara, Victor Songmene, Mohamed Nejib Said, Jules Kouam, Marcelo Reggio, Fernando Villalpando. 2019 « Transformation du granit : Caractérisation et contrôle de la poussière de la silice émise par le polissage ». Institut de recherche Robert-Sauvé en santé et en sécurité du travail. 99 p.
Pierre Belanger, Mohammad Jahazi. 2019 « Friction stir welded lap joint inspection using ultrasonic guided waves ». 45th Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 38 (Burlington, VT, USA, July 15-19, 2018) AIP Publishing
Sabrine Ben Amor, Salah Abdellaoui, Antoine Tahan, Borhen Louhichi, João Manuel R. S. Tavares. 2019 « Choosing the best direction of printing for additive manufacturing process in medical applications using a new geometric complexity model based on part CAD data ». VipIMAGE : Proceedings of the VII ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing (Porto, Portugal, Oct. 16-18, 2019) Springer Netherlands
Olivier Blancke, Amélie Combette, Normand Amyot, Dragan Komljenovic, Mélanie Lévesque, Claude Hudon, Antoine Tahan, Noureddine Zerhouni. 2019 « A predictive maintenance approach for complex equipment based on a failure mechanism propagation model ». International Journal of Prognostics and Health Management vol. 10 , nº 1
Nima Bohlooli Arkhazloo, Yassine Bouissa, Farzad Bazdidi-Tehrani, Mohammad Jadidi, Jean-Benoit Morin, Mohammad Jahazi. 2019 « Experimental and unsteady CFD analyses of the heating process of large size forgings in a gas-fired furnace ». Case Studies in Thermal Engineering vol. 14
Yassine Bouissa, Davood Shahriari, Henri Champliaud, Mohammad Jahazi. 2019 « Prediction of heat transfer coefficient during quenching of large size forged blocks using modeling and experimental validation ». Case Studies in Thermal Engineering vol. 13
K. Chadha, M. Jahazi, John G. Spray. 2019 « Effect of strain rate on the columnar to equiaxed transition in an as-cast medium-carbon low-alloy steel during hot deformation ». Materials Science and Technology (MS&T19) (Portland, OR, USA, Sept. 29-Oct. 3, 2019) Materials Science and Technology
K. Chadha, Davood Shahriari, C. Jr. Aranas, Louis-Philippe Lapierre-Boire, Mohammad Jahazi. 2019 « On the role of chromium in dynamic transformation of austenite ». Metals and Materials International vol. 25 , nº 3. p. 559-569
Kanwal Chadha, Mohammad Jahazi. 2019-03-12 « Approche atomistique de la transformation de l’acier ». Substance ÉTS
Kanwal Chadha, Mohammad Jahazi. 2019-03-12 « Atomistic Approach in Steel Transformation ». Substance ÉTS
Q. Chatenet, M. Gagnon, L. Tôn-Thât, M. Fouladirad, E. Remy, A. S. Tahan. 2019 « Stochastic modelling of cavitation erosion in Francis runner ». 29th IAHR Symposium on Hydraulic Machinery and Systems (Kyoto, Japan, Sept. 17-21, 2018) IOP Publishing
Quentin Dollon, Antoine Tahan, Jérôme Antoni, Martin Gagnon, Christine Monette. 2019 « Dynamic characterization of hydroelectric turbine with transient data records using OBMA and phase-shift analysis ». SURveillance VIbrations SHocks NOise : Book of Proceedings : SURVISHNO (Lyon, France, July 08-10, 2019) INSA
Frederic Dupont-Marillia, Mohammad Jahazi, Pierre Belanger. 2019 « Live imaging using TFM in a 30-inch forged steel block ». ASNT Annual Conference 2019 (Las Vegas, NV, USA, Nov. 18-21, 2019) ASNT
Frederic Dupont-Marillia, Mohammad Jahazi, Serge Lafreniere, Pierre Belanger. 2019 « Design and optimisation of a phased array transducer for ultrasonic inspection of large forged steel ingots ». NDT and E International vol. 103. p. 119-129
Frederic Dupont-Marillia, Mohammad Jahazi, Serge Lafreniere, Pierre Belanger. 2019 « Influence of local mechanical parameters on ultrasonic wave propagation in large forged steel ingots ». Journal of Nondestructive Evaluation vol. 38 , nº 3
G. R. Ebrahimi, A. Momeni, H. R. Ezatpour, M. Jahazi, P. Bocher. 2019 « Dynamic recrystallization in Mone1400 Ni-Cu alloy: mechanism and role of twinning ». Materials Science and Engineering: A vol. 744. p. 376-385
Adriana Eres-Castellanos, Javier Hidalgo, Muftah Zorgani, Mohammad Jahazi, Isaac Toda-Caraballo, Francisca G. Caballero, Mateo Garcia. 2019 « On the control of the scale of nanobainitic microstructures by prior austenite strengthening ». Communication lors de la conférence : European Congress and Exhibition on Advanced Materials and Processes (EUROMAT) (Stockholm, Sweden, Sept. 01-05, 2019)
A. Fall, H. Monajati, A. Khodabandeh, M. H. Fesharaki, H. Champliaud, M. Jahazi. 2019 « Local mechanical properties, microstructure, and microtexture in friction stir welded Ti-6Al-4V alloy ». Materials Science and Engineering: A vol. 749. p. 166-175
Eslam Fayed, Mamoun Medraj, Davood Shahriari, Mohammad Jahazi, Vladimir Brailovski. 2019 « Effect of heat treatment holding time on the microstructure and mechanical properties of Inconel 718 superalloy fabricated by selective laser melting ». Proceedings of The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019) Western University - Department of Mechanical and Materials Engineering
Mathieu Gendron, Bruce Hazel, Eric Boudreault, Henri Champliaud, Xuan-Tan Pham. 2019 « Coupled thermo-electromagnetic model of a new robotic high-frequency local induction heat treatment system for large steel components ». Applied Thermal Engineering vol. 150. p. 372-385
Marwa Haj Ibrahim, Ali Aidibe, Mohamed Ali Mahjoub, Antoine Tahan, Borhen Louhichi. 2019 « A novel approach to the inspection of deformable bodies by adapting the coherent point drift algorithm and using a clustering methodology ». International Journal of Advanced Manufacturing Technology vol. 103 , nº 1-4. p. 409-422
Hamid Javadi, Walid Jomaa, Victor Songmene, Myriam Brochu, Philippe Bocher. 2019 « Inconel 718 superalloy controlled surface integrity for fatigue applications produced by precision turning ». International Journal of Precision Engineering and Manufacturing vol. 20 , nº 8. p. 1297-1310
Ibtissem Jbira, Aicha Ben Makhlouf, Borhen Louhich, Antoine Tahan, Mohamed Ali Mahjoub, Dominique Deneux. 2019 « A comparative study of extraction cylinder features in industrial point clouds ». 23rd International Conference Information Visualisation (IV) (Paris, France, July 02-05, 2019) IEEE Computer Society
Ibtissem Jbira, Antoine Tahan, Serge Bonsaint, Mohamed Ali Mahjoub, Borhen Louhichi. 2019 « Reproducibility experimentation among computer-aided inspection software from a single point cloud ». Journal of Control Science and Engineering vol. 2019
F. B. Kouamou, V. Songmene, J. Kouam. 2019 « Effect of tool paths on fine & ultrafine particles emission & distribution during polishing of medium silica content granite ». Communication lors de la conférence : The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019)
Annie Francie Kouedeu, Jean-Pierre Kenné, Victor Songmene. 2019 « Optimal production planning of hybrid manufacturing/remanufacturing systems under deteriorations ». Proceedings of the 9th International Conference on Industrial Engineering and Operations Management (IEOM) (Bangkok, Thailand, March 05-07, 2019) IEOM Society
D. Lemonnier, J. M. Mac-Thiong, P. Belanger. 2019 « Transverse spinal cord blood vessels visualization in a pig using plane wave doppler ultrasound imaging ». Acta Acustica United with Acustica vol. 105 , nº 6. p. 1278-1282
David Lemonnier, Jean-Marc Mac-Thiong, Pierre Belanger. 2019 « Flow quantification in a wall-less multiple flow phantom using ultrasound plane wave doppler imaging ». Acta Acustica united with Acustica vol. 105 , nº 1. p. 130-138
Omid Majidi, Mohammad Jahazi, Nicolas Bombardier. 2019 « A viscoplastic model based on a variable strain rate sensitivity index for superplastic sheet metals ». International Journal of Material Forming vol. 12 , nº 4. p. 693-702
Omid Majidi, Mohammad Jahazi, Nicolas Bombardier. 2019 « Prediction of material behavior during biaxial stretching of superplastic 5083 aluminum alloy ». International Journal of Advanced Manufacturing Technology vol. 102 , nº 5-8. p. 2357-2366
F. Masoumi, D. Shahriari, H. Monajati, J. Cormier, B. C. D. Flipo, A. Devaux, M. Jahazi. 2019 « Linear friction welding of AD730TM Ni-base superalloy: process-microstructure-property interactions ». Materials and Design vol. 183
Jérémy Montlahuc, Louis Rivest, Jean-Philippe Pernot, Antoine Tahan, Arnaud Polette. 2019 « Vers une utilisation conjointe de données multi-sources pour la génération et le traitement de nuages de points multicouches de parcelles et d’ouvrages existants : constats et premiers éléments d’analyse ». Affiche présentée lors de la conférence : 87 e Congrès de l'ACFAS (Gatineau, QC, Canada, 27-31 mai 2019)
Mohamad Nassar, Lotfi Guizani, Marie-José Nollet, Antoine Tahan. 2019 « A probability-based reliability assessment approach of seismic base-isolated bridges in cold regions ». Engineering Structures vol. 197
Seyed Ali Niknam, Masoud Saberi, Jules Kouam, Ramin Hashemi, Victor Songmene, Marek Balazinski. 2019 « Ultrafine and fine particle emission in turning titanium metal matrix composite (Ti-MMC) ». Journal of Central South University vol. 26 , nº 6. p. 1563-1572
Seyed Ali Niknam, Azziz Tiabi, Victor Songmene. 2019 « Burr edge occupancy: edge finishing index for milling machined parts ». Transactions of the Canadian Society for Mechanical Engineering vol. 43 , nº 2. p. 248-255
Oluwole A. Olufayo, Oussama Chaieb, Victor Songmene, Mohammad Jahazi. 2019 « Machining studies on high silicon content Al-Si alloys for the aerospace industry ». Communication lors de la conférence : The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019)
Oluwole A. Olufayo, Hanqing Che, Victor Songmene, Christina Katsari, Stephen Yue. 2019 « Machinability of Rene 65 superalloy ». Materials vol. 12 , nº 12
Oluwole A. Olufayo, Osamaand Elfasi, Victor Songmene. 2019 « Machinability studies of ferritic, austenitic and martensitic stainless steels ». Proceedings of The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019) Western University - Department of Mechanical and Materials Engineering
Daniel Pereira, Pierre Belanger. 2019 « Inverse characterization of adhesive shear modulus in bonded stiffeners using ultrasonic guided waves ». 45th Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 38 (Burlington, VT, USA, July 15-19, 2018) AIP Publishing
Daniel Pereira, Guillaume Haiat, Julio Fernandes, Pierre Belanger. 2019 « Effect of intracortical bone properties on the phase velocity and cut-off frequency of low-frequency guided wave modes (20-85 kHz) ». Journal of the Acoustical Society of America vol. 145 , nº 1. p. 121-130
Q. H. Pham, M. Gagnon, A. Tahan, C. Monette. 2019 « Interpolation of periodic hidden signal measured at steady-operating conditions on hydroelectric turbine runners ». SURveillance VIbrations SHocks NOise : Book of Proceedings : SURVISHNO (Lyon, France, July 08-10, 2019) INSA
Antoine Proteau, Antoine Tahan, Marc Thomas. 2019 « Specific cutting energy: a physical measurement for representing tool wear ». International Journal of Advanced Manufacturing Technology vol. 103 , nº 1-4. p. 101-110
Antoine Proteau, Marc Thomas, Antoine Tahan. 2019 « Toward the quality prognostic of an aircraft engine workpiece in Inconel Alloy 625: case study and proposed system architecture ». SURveillance VIbrations SHocks NOise : Book of Proceedings : SURVISHNO (Lyon, France, July 08-10, 2019) INSA
Samuel F. Rodrigues, Fulvio Siciliano, Clodualdo Aranas Jr., Eden S. Silva, Gedeon S. Reis, Mohammad Jahazi, John J. Jonas. 2019 « Dynamic phase transformation behavior of a Nb-microalloyed steel during roughing passes at temperatures above the Ae3 ». Metals vol. 9 , nº 3
Mohammad Saadati, Amir Keyvan Edalat Nobarzad, Mohammad Jahazi. 2019 « On the hot cracking of HSLA steel welds: Role of epitaxial growth and HAZ grain size ». Journal of Manufacturing Processes vol. 41. p. 242-251
M. N. Saidi, V. Songmene, J. Kouam, A. Bahloul. 2019 « Study of surface quality and dust particles emission and dispersion during dry polishing of granite ». International Journal of Advanced Manufacturing Technology vol. 104. p. 4675-4684
Sheida Sarafan, Priti Wanjara, Jean-Benoît Lévesque, Javad Gholipour, Henri Champliaud, Louis Mathieu. 2019 « Residual stresses, microstructure, and mechanical properties of EB-Welded 90-mm-Thick UNS S41500 martensitic stainless steel after PWHT ». Materials Performance and Characterization vol. 8 , nº 4. p. 648-663
Ahad Shafiee, Jongun Moon, Hyoung Seop Kim, Mohammad Jahazi, Mahmoud Nili-Ahmadabadi. 2019 « Precipitation behaviour and mechanical properties of a new wrought high entropy superalloy ». Materials Science and Engineering: A vol. 749. p. 271-280
Mohamed Shnfir, Oluwole A. Olufayo, Walid Jomaa, Victor Songmene. 2019 « Machinability study of hardened 1045 steel when milling with ceramic cutting inserts ». Materials vol. 12 , nº 23
Victor Songmene. 2019 « Comité R&D aluminium : Enjeux pour l'usinage ». Communication lors de la conférence : Séminaire, CMQ, Organisé par Alu-Québec en collaboration avec CeAL (Trois-Rivières, QC, Canada, 31 janv. 2019)
Victor Songmene. 2019 « Progress on fine and ultrafine particles emission, dispersion & control during machining : cases of metals, composite, woods and granite ». Communication lors de la conférence : 5th Edition of International Conference on Occupational Health and Public Safety (Berlin, Germany, Apr. 23-24, 2019)
Victor Songmene. 2019 « Usinage 4.0 : optimisation des performances d'usinage ». Communication lors de la conférence : Séminaire Usinage 4.0, CTA Saint-Hubert, organisé par Réseau-TransA1 en collaboration avec Alu-Québec, CeAl et CRITM (Saint-Hubert, QC, Canada, 01 oct. 2019)
Seyedmohammad Tabaie, Davood Shahriari, Cléa Plouze, Alexandre Devaux, Jonathan Cormier, Mohammad Jahazi. 2019 « Hot ductility behavior of AD730™ nickel-base superalloy ». Materials Science and Engineering: A vol. 766
Valentin Thieulin, Louis Rivest, Antoine Tahan. 2019 « Investigation des performances in situ de la numérisation d’une tuyauterie industrielle par photogrammétrie et lumière structurée ». Affiche présentée lors de la conférence : 87 e Congrès de l'ACFAS (Gatineau, QC, Canada, 27-31 mai 2019)
Aurélien Thon, Pierre Bélanger. 2019 « EMAT design for minimum remnant thickness gauging using high order shear horizontal modes ». Ultrasonics vol. 95. p. 70-78
Heithem Touazine, Kanwal Chadha, Mohammad Jahazi, Philippe Bocher. 2019 « Characterization of subsurface microstructural alterations induced by hard turning of Inconel 718 ». Journal of Materials Engineering and Performance vol. 28 , nº 11. p. 7016-7024
Nicolas Tremblay, Baptiste Gauthier, Pierre Belanger. 2019 « Feasibility of structural health monitoring in a composite plate using omnidirectional SH0 transduction ». 45th Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 38 (Burlington, VT, USA, July 15-19, 2018) AIP Publishing
Chunping Zhang, Abdelhalim Loucif, Rami Tremblay, Mohammad Jahazi. 2019 « Influence of non-uniform temperature distribution of the mold on solidification behavior in large-size steel ingots ». Proceedings of the 8th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking (STEELSIM 2019) (Toronto, ON, Canada, Aug. 13-15, 2019) Association for Iron & Steel Technology
Floriane Zongo, Antoine Tahan, Vladimir Brailovski. 2019 « Scale, material concentration, stress relief and part removal effects on the dimensional behaviour of selected AlSi10Mg components manufactured by laser powder bed fusion ». Journal of Manufacturing and Materials Processing vol. 3 , nº 2
Hector de Castilla, Pierre Bélanger, Ricardo J. Zednik. 2019 « Generalized dynamic analytical model of piezoelectric materials for characterization using electrical impedance spectroscopy ». Materials vol. 12 , nº 16

Fatemeh Aghazadeh, Antoine Tahan, Marc Thomas. 2018 « Tool condition monitoring using spectral subtraction algorithm and artificial intelligence methods in milling process ». International Journal of Mechanical Engineering and Robotics Research vol. 7 , nº 1. p. 30-34
Fatemeh Aghazadeh, Antoine Tahan, Marc Thomas. 2018 « Tool condition monitoring using spectral subtraction and convolutional neural networks in milling process ». International Journal of Advanced Manufacturing Technology vol. 98 , nº 9-12. p. 3217-3227
A. Aidibe, A. Tahan, V. Brailovski. 2018 « A novel industrial test artifact for the evaluation of dimensional capabilities of metallic additive manufacturing systems ». Proceedings of the European Powder Metallurgy Association (EPMA) : Euro PM2018 (Bilbao, Spain, Oct. 14-18, 2018) European Powder Metallurgy Association (EPMA)
Clodualdo Jr. Aranas, Samuel Rodrigues, Ameth Fall, Mohammad Jahazi, John Jonas. 2018 « Determination of the critical stress associated with dynamic phase transformation in steels by means of free energy method ». Metals vol. 8 , nº 5
Nima Bohlooli Arkhazloo, Farzad Bazdidi-Tehrani, Morin Jean-Benoit, Mohammad Jahazi. 2018 « A numerical thermal analysis of the heating process of large size forged ingots ». THERMEC 2018 : 10th International Conference on Processing and Manufacturing of Advanced Materials (Paris, France, July 9-13, 2018) Trans Tech Publications
Emna Ben Fredj, Hadi Ghasemi Nanesa, Mohammad Jahazi, Jean-Benoit Morin. 2018 « Influence of initial microstructure and grain size on transformation of bainite to austenite in large size forgings ». Journal of Iron and Steel Research International vol. 25 , nº 5. p. 554-562
Mounia Berdai, Antoine Tahan, Martin Gagnon. 2018 « A comparison between aggregation before and after propagation based on a reliability model ». Information Sciences vol. 453. p. 99-110
Samuel Bertrand, Davood Shahriari, Mohammad Jahazi, Henri Champliaud. 2018 « Linear friction welding process simulation of Ti-6Al-4V alloy: a heat transfer analysis of the conditioning phase ». 17th International Conference on Metal Forming (Metal Forming) (Toyohashi, Japan, Sept. 16-19, 2018) Elsevier B.V.
Matthieu Bitterlin, Davood Shahriari, Louis-Philippe Lapierre-Boire, Jean-Benoît Morin, Mohammad Jahazi. 2018 « Hot deformation behavior of a nickel-modified AISI 4330 steel ». ISIJ International vol. 58 , nº 9. p. 1711-1720
Olivier Blancke, Amélie Combette, Normand Amyot, Dragan Komljenovic, Mélanie Lévesque, Claude Hudon, Antoine Tahan, Noureddine Zerhouni. 2018 « A predictive maintenance approach for complex equipment based on petri net failure mechanism propagation model ». Proceedings of the European Conference of the PHM Society vol. 4 , nº 1
Olivier Blancke, Antoine Tahan, Dragan Komljenovic, Normand Amyot, Mélanie Lévesque, Claude Hudon. 2018 « A holistic multi-failure mode prognosis approach for complex equipment ». Reliability Engineering and System Safety vol. 180. p. 136-151
Guillaume Boivin, Martin Viens, Pierre Belanger. 2018 « Plane wave SH0 piezoceramic transduction optimized using geometrical parameters ». Sensors vol. 18 , nº 2
A. Bouzid, V. Songmene, J. P. Kenné. 2018 « Bavures d'usinage et ébavurage : Méthode de sélection des procédés et allocation optimale des machines ». 7th International Metrology Conference – CAFMET 2018 (Marrakech, Maroc, Apr. 09-12, 2018) Comite Africain de Metrologie
Gary Brionne, Abdelhalim Loucif, Chunping Zhang, Louis-Philippe Lapierre-Boire, Mohammad Jahazi. 2018 « 3D FEM simulation of the effect of cooling rate on SDAS and macrosegregation of a high strength steel ». 10th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Paris, France, July 09-13, 2018) Trans Tech Publications Ltd
P. Cambron, C. Masson, A. Tahan, F. Pelletier. 2018 « Control chart monitoring of wind turbine generators using the statistical inertia of a wind farm average ». Renewable Energy vol. 116 , nº B. p. 88-98
K. Chadha, Z. Ahmed, C. Aranas, D. Shahriari, M. Jahazi. 2018 « Influence of strain rate on dynamic transformation of austenite in an as-cast medium-carbon low-alloy steel ». Materialia vol. 1. p. 155-167
Henri Champliaud, Zhengkun Feng. 2018 « Numerical and experimental comparisons of pressed blades for large Francis turbine runners manufactured with a reconfigurable pressing setup and a conventional setup ». International Journal of Service and Computing Oriented Manufacturing (IJSCOM) vol. 3 , nº 4. p. 293-317
Henri Champliaud, Valentin Vieillot, David Provencher, Ngan Van Lê. 2018 « Rapid 3D shape forming computation with piecewise heating lines using a fifth order spline formulation ». 30th European Modeling and Simulation Symposium (EMSS 2018) (Budapest , Hungary, Sept. 17-19, 2018) Dime University of Genoa
Abdelhakim Djebara, Victor Songmene, Ali Bahloul. 2018 « Performance of a capillary dilution system for high concentration sampling of ultrafine aerosols ». Aerosol Science and Engineering vol. 2 , nº 2. p. 92–97
Frederic Dupont-Marillia, Mohammad Jahazi, Pierre Bélanger. 2018 « Phased array inspection of large size forged steel parts ». 44th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2017) (Provo, UT, USA, July 16-21, 2017) American Institute of Physics
Timothe Falardeau, Pierre Bélanger. 2018 « Material characterization using ultrasound tomography ». 44th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2017) (Provo, UT, USA, July 16-21, 2017) American Institute of Physics
Timothe Falardeau, Pierre Belanger. 2018 « Ultrasound tomography in bone mimicking phantoms: Simulations and experiments ». Journal of the Acoustical Society of America vol. 144 , nº 5. p. 2937-2946
Alexandre Filion, Ahmed Joubair, Antoine S. Tahan, Ilian A. Bonev. 2018 « Robot calibration using a portable photogrammetry system ». Robotics and Computer-Integrated Manufacturing vol. 49. p. 1339-1351
Baptiste Gauthier, Aurelien Thon, Pierre Bélanger. 2018 « Comparison of a piezoceramic transducer and an EMAT for the omnidirectional transduction of SH0 ». 44th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2017) (Provo, UT, USA, July 16-21, 2017) American Institute of Physics
Baoqi Guo, Clodualdo Aranas, Anes Foul, Xiankun Ji, Ameth Fall, Mohammad Jahazi, John J. Jonas. 2018 « Effect of multipass deformation at elevated temperatures on the flow behavior and microstructural evolution in Ti-6Al-4V ». Materials Science and Engineering: A vol. 729. p. 119-124
Baoqi Guo, Ameth Fall, Mohammad Jahazi, John J. Jonas. 2018 « Kinetics of post-dynamic coarsening and reverse transformation in Ti-6Al-4V ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 49 , nº 12. p. 5956-5961
Shreyank Gupta, Guillaume Haïat, Catherine Laporte, Pierre Belanger. 2018 « Effect of acoustic impedance mismatch between skin and bone on transcranial ultrasound transmission ». Affiche présentée lors de la conférence : 176TH Meeting of the Acoustical Society of America, 2018 Acoustics Week in Canada () Acoustical Society of America.
Hamid Habibzadeh Boukani, Martin Viens, Souheil-Antoine Tahan, Martin Gagnon. 2018 « Case study on the integrity and nondestructive inspection of flux-cored arc welded joints of Francis turbine runners ». International Journal of Advanced Manufacturing Technology vol. 98 , nº 5-8. p. 2201-2211
Ibtissem Jbira, Antoine Tahan, Mohammed Ali Mahjoub, Borhen Louhichi. 2018 « Evaluation of the algorithmic error of new specification tools for an ISO 14405-1:2016 size ». ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (Québec, QC, Canada, Aug. 26-29, 2018)
Guy Richard Kibouka, Donatien Nganga-Kouya, Jean-Pierre Kenné, Vladimir Polotski, Victor Songmene. 2018 « Maintenance and setup planning in manufacturing systems under uncertainties ». Journal of Quality in Maintenance Engineering vol. 24 , nº 2. p. 170-184
D. Lemonnier, J. M. Mac-Thiong, P. Bélanger. 2018 « Ultrasound plane wave doppler quantification using a wall-less spinal cord representative phantom ». Acta Acustica united with Acustica vol. 104 , nº 1. p. 166-173
Abdelhalim Loucif, Emna Ben Fredj, Nathan Harris, Davood Shahriari, Mohammad Jahazi, Louis-Philippe Lapierre-Boire. 2018 « Evolution of A-type macrosegregation in large size steel ingot after multistep forging and heat treatment ». Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science vol. 49 , nº 3. p. 1046-1055
Abdelhalim Loucif, Matthieu Bitterlin, Mohammad Jahazi, Rami Tremblay, Jean-Benoît Morin, Louis-Philippe Lapierre-Boire. 2018 « Determination of the root causes for cracking in a large-size cast ingot of AISI 4317 steel using microstructural analysis ». Metallography, Microstructure, and Analysis vol. 7 , nº 2. p. 203-208
Abdelhalim Loucif, Davood Shahriari, Kanwal Chadha, Chunping Zhang, Mohammad Jahazi, Rami Tremblay, Louis-Philippe Lapierre-Boire. 2018 « Cracking and failure in a high strength low alloy steel during solidification ». 10th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Paris, France, July 09-13, 2018) Trans Tech Publications Ltd
Abdelhalim Loucif, Heithem Touazine, Mohammad Jahazi. 2018 « Prediction of steel transformation temperatures using thermodynamic modeling and design of experiments (DOE) ». 10th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Paris, France, July 09-13, 2018) Trans Tech Publications Ltd
Mountadar Lyassami, Davood Shahriari, Emna Ben Fredj, Jean-Benoit Morin, Mohammad Jahazi. 2018 « Numerical simulation of water quenching of large size steel forgings: Effects of macrosegregation and grain size on phase distribution ». Journal of Manufacturing and Materials Processing vol. 2 , nº 2
Omid Majidi, Mohammad Jahazi, Nicolas Bombardier. 2018 « Characterization of mechanical properties and formability of a superplastic Al-Mg alloy ». NUMISHEET 2018: 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (Tokyo, Japan, July 30-Aug. 6, 2018) IOP Publishing
Omid Majidi, Mohammad Jahazi, Nicolas Bombardier. 2018 « Finite element simulation of high-speed blow forming of an automotive component ». Metals vol. 8 , nº 11
Mohsen Marani, Victor Songmene, Jules Kouam, Yasser Zedan. 2018 « Experimental investigation on microstructure, mechanical properties and dust emission when milling Al-20Mg 2Si-2Cu metal matrix composite with modifier elements ». International Journal of Advanced Manufacturing Technology vol. 99 , nº 1-4. p. 789-802
Mohsen Marani, Victor Songmene, Jules Kouam, Yasser Zedan. 2018 « Valuation of the effect of barium on surface roughness and ultrafine particle emission while dry milling Al-20Mg2Si metal matrix composite ». 2018 6th International Conference on Mechanical, Automotive and Materials Engineering (CMAME) (Hong Kong, China, Aug. 10-12, 2018) IEEE
Mohsen Marani-Barzani, Victor Songmene. 2018 « Machinability and mechanical properties of Al-Mg2Si in-situ composite with bismuth or barium ». Affiche présentée lors de la conférence : REGAL student's day ()
F. Masoumi, L. Thebaud, D. Shahriari, M. Jahazi, J. Cormier, A. Devaux, B. C. D. Flipo. 2018 « High temperature creep properties of a linear friction welded newly developed wrought Ni-based superalloy ». Materials Science and Engineering: A vol. 710. p. 214-226
Mahdi Masoumi Khalilabad, Yasser Zedan, Damien Texier, Mohammad Jahazi, Philippe Bocher. 2018 « Effect of tool geometry and welding speed on mechanical properties of dissimilar AA2198–AA2024 FSWed joint ». Journal of Manufacturing Processes vol. 34, part A. p. 86-95
Ahmad Mostafa, Davood Shahriari, Ignacio Picazo Rubio, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2018 « Hot compression behavior and microstructure of selectively laser-melted IN718 alloy ». International Journal of Advanced Manufacturing Technology vol. 96 , nº 1-4. p. 371-385
M. Nassar, L. Guizani, M. -J. Nollet, A. Tahan. 2018 « Approche probabiliste pour évaluer la fiabilité des ponts isolés à la base, sous l’effet simultané des séismes et de la température en régions froides ». 25e Colloque sur la progression de la recherche québécoise sur les ouvrages d’art (Montréal, QC, Canada, 8-9 mai 2018)
Mohamad Nassar, Lotfi Guizani, Marie-José Nollet, Antoine Tahan. 2018 « A probabilistic approach to assess seismic base-isolated bridges reliability in cold climate ». 11th National Conference on Earthquake Engineering 2018: Integrating Science, Engineering, and Policy (NCEE) (Los Angeles, CA, USA, June 25-29, 2018) Earthquake Engineering Research Institute
H.-C. Nguyen, X-T. Pham, M. Jahazi. 2018 « Implementing phase-field ductile fracture model for aluminum welded joint ». Affiche présentée lors de la conférence : REGAL student’s day (Montreal, QC, Canada, June 18-19, 2018)
Hoan Huy Nguyen, Henri Champliaud, Van Ngan Lê. 2018 « Dynamic finite element modeling of metal spinning process with a stationary mandrel and a rotating tool ». 30th European Modeling and Simulation Symposium (EMSS 2018) (Budapest , Hungary, Sept. 17-19, 2018) Dime University of Genoa
Seyed Ali Niknam, Behnam Davoodi, J. Paulo Davim, Victor Songmene. 2018 « Mechanical deburring and edge-finishing processes for aluminum partsa review ». International Journal of Advanced Manufacturing Technology vol. 95 , nº 1-4. p. 1101-1125
Seyed Ali Niknam, Jules Kouam, Victor Songmene, Marek Balazinski. 2018 « Dry and semi-dry turning of titanium metal matrix composites (Ti-MMCs) ». 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest , Hungary, June 25-27, 2018) Elsevier
Francisco G. Pantoja, Victor Songmene, Jean-Pierre Kenné, Oluwole A. Olufayo, Michael Ayomoh. 2018 « Development of a tool cost optimization model for stochastic demand of machined products ». Applied Mathematics vol. 9 , nº 12. p. 1395-1423
Morteza Sadeghifar, Ramin Sedaghati, Walid Jomaa, Victor Songmene. 2018 « A comprehensive review of finite element modeling of orthogonal machining process: chip formation and surface integrity predictions ». International Journal of Advanced Manufacturing Technology vol. 96 , nº 9-12. p. 3747-3791
Morteza Sadeghifar, Ramin Sedaghati, Walid Jomaa, Victor Songmene. 2018 « Finite element analysis and response surface method for robust multi-performance optimization of radial turning of hard 300M steel ». International Journal of Advanced Manufacturing Technology vol. 94 , nº 5-8. p. 2457-2474
M. N. Saidi, V. Songmene, J. Kouam, A. Bahloul. 2018 « Rotational and translation-free polishing of granite: surface quality and dust particles emission and dispersion ». International Journal of Advanced Manufacturing Technology vol. 98 , nº 1-4. p. 289-303
Sasan Sattarpanah Karganroudi, Jean-Christophe Cuillière, Vincent François, Souheil-Antoine Tahan. 2018 « “What-if” scenarios towards virtual assembly-state mounting for non-rigid parts inspection using permissible loads ». International Journal of Advanced Manufacturing Technology vol. 97 , nº 1-4. p. 353-373
Raiyan Seede, Ahmad Mostafa, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2018 « Microstructural and microhardness evolution from homogenization and hot isostatic pressing on selective laser melted inconel 718: Structure, texture, and phases ». Journal of Manufacturing and Materials Processing vol. 2 , nº 2
V. Songmene, J. Kouam, A. Balhoul. 2018 « Effect of minimum quantity lubrication (MQL) on fine and ultrafine particle emission and distribution during polishing of granite ». Measurement: Journal of the International Measurement Confederation vol. 114. p. 398-408
V. Songmene, A. Miazza, J. Kouam, O.A. Olufayo. 2018 « Machining granite materials: effects of polishing conditions on part quality, fine and ultrafine particles emission ». 7th International Metrology Conference – CAFMET 2018 (Marrakech, Maroc, Apr. 09-12, 2018) Comite Africain de Metrologie
Victor Songmene. 2018 « Effect of machining & lubricating conditions on dust emission during granite polishing ». Communication lors de la conférence : 4th International Conference on Occupational Health and Safety, EuroSciCon (London, UK, May 28-29, 2018)
Victor Songmene, Alban Miazza, Mohamed Amine Hechmi, Oluwole Ayodeji Olufayo, Jules Kouam. 2018 « Granite polishing: Effects of polishing parameters and tool paths on part quality and dust emission ». 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest , Hungary, June 25-27, 2018) Elsevier
Victor Songmene, Imed Zaghbani, Guillaume Kientzy. 2018 « Machining and machinability of tool steels: Effects of lubrication and machining conditions on tool wear and tool life data ». 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest, Hungary, June 25-27, 2018) Elsevier
Binhan Sun, Fateh Fazeli, Colin Scott, Baoqi Guo, Clodualdo Aranas, Xin Chu, Mohammad Jahazi, Stephen Yue. 2018 « Microstructural characteristics and tensile behavior of medium manganese steels with different manganese additions ». Materials Science and Engineering: A vol. 729. p. 496-507
Seyyed Hesamodin Talebi, Hadi Ghasemi-Nanesa, Mohammad Jahazi, Haikouhi Melkonyan. 2018 « Influence of starting microstructure on dilatation behavior during tempering of a high strength steel ». THERMEC 2018 : 10th International Conference on Processing and Manufacturing of Advanced Materials (Paris, France, July 9-13, 2018) Trans Tech Publications
Seyyed Hesamondin Talebi, Mohammad Jahazi, Haikouhi Melkonyan. 2018 « Retained austenite decomposition and carbide precipitation during isothermal tempering of a medium-carbon low-alloy bainitic steel ». Materials vol. 11 , nº 8
C. Zhang, D. Shahriari, A. Loucif, H. Melkonyan, M. Jahazi. 2018 « Influence of thermomechanical shrinkage on macrosegregation during solidification of a large-sized high-strength steel ingot ». International Journal of Advanced Manufacturing Technology vol. 99 , nº 9-12. p. 3035-3048
Chunping Zhang, Abdelhalim Loucif, Mohammad Jahazi, Rami Tremblay, Louis-Philippe Lapierre. 2018 « On the effect of filling rate on positive macrosegregation patterns in large size cast steel ingots ». Applied Sciences vol. 8 , nº 10
Floriane Zongo, Antoine Tahan, Ali Aidibe, Vladimir Brailovski. 2018 « Intra- and inter-repeatability of profile deviations of an AlSi10Mg tooling component manufactured by laser powder bed fusion ». Journal of Manufacturing and Materials Processing vol. 2 , nº 3

A. Abid, D. Pereira, J. C. Fernandes, P. Belanger. 2017 « Sensitivity study of ultrasonic guided waves to cortical bone mechanical properties with axial and circumferential propagation ». Acta Acustica united with Acustica vol. 103 , nº 3. p. 421-429
Ali Aidibe, Mojtaba Kamali Nejad, Antoine Tahan, Mohammad Jahazi, Sylvain G. Cloutier. 2017 « Surface characterization of die inserts used for LED lamp plastic lenses ». International Journal of Advanced Manufacturing Technology vol. 88 , nº 9-12. p. 3395-3403
Clodualdo Aranas, Anes Foul, Baoqi Guo, Ameth Fall, Mohammad Jahazi, John J. Jonas. 2017 « Determination of the critical stress for the initiation of dynamic transformation in commercially pure titanium ». Scripta Materialia vol. 133. p. 83-85
Mohsen Marani Barzani, Saeed Farahany, Victor Songmene. 2017 « Machinability characteristics, thermal and mechanical properties of Al-Mg2Si in-situ composite with bismuth ». Measurement: Journal of the International Measurement Confederation vol. 110. p. 263-274
Guillaume Boivin, Pierre Bélanger, Ricardo J. Zednik. 2017 « Torsional piezoelectric strain in monocrystalline paratellurite ». International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Graz, Austria, May 29-June 03, 2016) Trans Tech Publications
Ali Bonakdar, Marjan Molavi-Zarandi, Ahmad Chamanfar, Mohammad Jahazi, Arash Firoozrai, Eric Morin. 2017 « Finite element modeling of the electron beam welding of Inconel-713LC gas turbine blades ». Journal of Manufacturing Processes vol. 26. p. 339-354
Yassine Bouissa, Henri Champliaud, Mohammad Jahazi, Louis-Philippe Lapierre-Boire, Jean-Benoît Morin, Nicolas Poulain. 2017 « Modeling heterogeneities effects on phase transformation during quenching of large size forged steel ingots ». Communication lors de la conférence : 14th U.S. National Congress on Computational Mechanics (USNCCM) (Montreal, QC, Canada, July 17-20, 2017)
Philippe Cambron, Christian Masson, Antoine Tahan, David Torres, Francis Pelletier. 2017 « Comparison of power curve monitoring methods ». International Conference on Advances in Energy Systems and Environmental Engineering (ASEE 2017) (Wroclaw, Poland, July 02-05, 2017) EDP Sciences
Philippe Cambron, Antoine Tahan, Christian Masson, Francis Pelletier. 2017 « Bearing temperature monitoring of a Wind Turbine using physics-based model ». Journal of Quality in Maintenance Engineering vol. 23 , nº 4. p. 479-488
K. Chadha, D. Shahriari, R. Tremblay, P. P. Bhattacharjee, M. Jahazi. 2017 « Deformation and recrystallization behavior of the cast structure in large size, high strength steel ingots: Experimentation and modeling ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 48 , nº 9. p. 4297-4313
Kanwal Chadha, Davood Shahriari, Mohammad Jahazi. 2017 « An approach to develop hansel-spittel constitutive equation during ingot breakdown operation of low alloy steels ». Frontiers in Materials Processing, Applications, Research and Technology : Select Proceedings of FiMPART 2015 (Hyderabad, India, June 12-15, 2015) Springer
Ahmad Chamanfar, Hossein Monajati, Alex Rosenbaum, Mohammad Jahazi, Ali Bonakdar, Eric Morin. 2017 « Microstructure and mechanical properties of surface and subsurface layers in broached and shot-peened Inconel-718 gas turbine disc fir-trees ». Materials Characterization vol. 132. p. 53-68
S. M. Chentouf, T. Belhadj, N. Bombardier, N. Brodusch, R. Gauvin, M. Jahazi. 2017 « Influence of predeformation on microstructure evolution of superplastically formed Al 5083 alloy ». International Journal of Advanced Manufacturing Technology vol. 88 , nº 9-12. p. 2929-2937
P. Comot, P. Bocher, P. Belanger. 2017 « Ultrasonic guided wave inspection of Inconel 625 brazed lap joints: Simulation and experimentation ». NDT and E International vol. 91. p. 71-78
Jean-Loup Curtat, Jacques Lanteigne, Henri Champliaud, Zhaoheng Liu, Jean-Benoît Lévesque. 2017 « Influence of hammer peening on fatigue life of E309L steel used for 13%Cr-4%Ni blade runner repairs ». International Journal of Fatigue vol. 100. p. 68-77
Frederic Dupont-Marillia, Mohammad Jahazi, Serge Lafreniere, Pierre Bélanger. 2017 « Influence of local mechanical properties of high strength steel from large size forged ingot on ultrasonic wave velocities ». 43rd Annual Review of Progress in Quantitative Nondestructive Evaluation (Atlanta, GA, USA, July 17-22, 2016) American Institute of Physics
Tarek Elgnemi, Keivan Ahmadi, Victor Songmene, Jungsoo Nam, Martin B. G. Jun. 2017 « Effects of atomization-based cutting fluid sprays in milling of carbon fiber reinforced polymer composite ». Journal of Manufacturing Processes vol. 30. p. 133-140
A. Fall, M. Jahazi, A. R. Khodabandeh, M. H. Fesharakib. 2017 « Effect of process parameters on microstructure and mechanical properties of friction stir-welded Ti-6Al-4V joints ». International Journal of Advanced Manufacturing Technology vol. 91 , nº 5-8. p. 2919-2931
Zhengkun Feng, Henri Champliaud, Louis Mathieu. 2017 « Investigations of a reconfigurable pressing setup for manufacturing blades of large francis turbines runners from very thick plates ». 29th European Modeling and Simulation Symposium (EMSS) (Barcelona, Spain, Sept. 18-20, 2017) CAL-TEK S.r.l.
Emna Ben Fredj, Hadi Ghasemi Nanesa, Davood Shahriari, Jean-Benoit Morin, Mohammad Jahazi. 2017 « Effect of cooling rate on phase transformation and microstructure evolution in a large size forged ingot of medium carbon low alloy steel ». TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings (San Diego, CA, USA, Feb. 26-March 2, 2017) Springer International Publishing
Mathieu Gendron, Bruce Hazel, Eric Boudreault, Henri Champliaud, Xuan-Tan Pham. 2017 « Modeling circular inductors coupled to a semi-infinite magnetic medium considering the proximity effect ». Journal of Electromagnetic Waves and Applications vol. 31 , nº 13. p. 1232-1254
Seyedbehzad Ghafarizadeh, Amir Masoud Tahvilian, Jean-François Chatelain, Zhaoheng Liu, Henri Champliaud, Gilbert Lebrun. 2017 « Numerical simulation of ball-end milling with SPH method ». International Journal of Advanced Manufacturing Technology vol. 88 , nº 1. p. 401-408
Hadi Ghasemi-Nanesa, Mohammad Jahazi, Majid Heidari, Tom Levasseur. 2017 « The influence of deformation-induced microvoids on mechanical failure of AISI A8-Mod martensitic tool steel ». 20th International ESAFORM Conference on Material Forming (ESAFORM) (Dublin, Ireland, Apr. 26-28, 2017) American Institute of Physics
Nathan Harris, Davood Shahriari, Mohammad Jahazi. 2017 « Development of a fast converging material specific void closure model during ingot forging ». Journal of Manufacturing Processes vol. 26. p. 131-141
S. Hesamodin Talebi, Hadi Ghasemi-Nanesa, Mohammad Jahazi, Haikouhi Melkonyan. 2017 « In situ study of phase transformations during non-isothermal tempering of bainitic and martensitic microstructures ». Metals vol. 7 , nº 9
I. Jbira, M. Tlija, B. Louhichi, A. Tahan. 2017 « CAD/Tolerancing integration: Mechanical assembly with form defects ». Advances in Engineering Software vol. 114. p. 312-324
Walid Jomaa, Oussama Mechri, Julie Levesque, Victor Songmene, Philippe Bocher, Augustin Gakwaya. 2017 « Finite element simulation and analysis of serrated chip formation during highspeed machining of AA7075T651 alloy ». Journal of Manufacturing Processes vol. 26. p. 446-458
Walid Jomaa, Victor Songmene, Philippe Bocher. 2017 « Predictive analytical modeling of cutting forces generated by high-speed machining of ductile and hard metals ». Machining Science and Technology vol. 21 , nº 3. p. 335-361
Walid Jomaa, Victor Songmene, Philippe Bocher, Augustin Gakwaya. 2017 « Fea-based comparative investigation on high speed machining of aluminum alloys aa6061-t6 and aa7075-t651 ». 9th International Congress on Precision Machining, (ICPM 2017) (Athens, Greece, Sept. 06-09, 2017)
John J. Jonas, Clodualdo Aranas, Ameth Fall, Mohammad Jahazi. 2017 « Transformation softening in three titanium alloys ». Materials & Design vol. 113. p. 305-310
Sasan Sattarpanah Karganroudi, Jean-Christophe Cuillière, Vincent François, Antoine Souheil Tahan. 2017 « Assessment of the robustness of a fixtureless inspection method for non-rigid parts based on a verification and validation approach ». Journal of Verification, Validation and Uncertainty Quantification vol. 2 , nº 4
Frank Éric Kemi Yotat, Jean-Pierre Kenné, Victor Songmene. 2017 « Optimal stochastic control of an aluminium recycling unit in reverse logistics ». 29th European Modeling and Simulation Symposium (EMSS 2017) Held at the International Multidisciplinary Modeling and Simulation Multiconference (I3M 2017) (Barcelona, Spain, Sept. 18-20, 2017) CAL-TEK S.r.l.
Riad Khettabi, Mourad Nouioua, Abdelhakim Djebara, Victor Songmene. 2017 « Effect of MQL and dry processes on the particle emission and part quality during milling of aluminum alloys ». International Journal of Advanced Manufacturing Technology vol. 92 , nº 5/8. p. 2593-2598
A. Loucif, M. Bitterlin, M. Jahazi, R. Tremblay, J. B. Morin, L. P. Lapierre-Boire. 2017 « Crack analysis in as cast large size ingot of a high strength steel ». 14th International Conference on Fracture (ICF 2017) (Rhodes, Greece, June 18-20, 2017) International Conference on Fracture
A. Loucif, D. Shahriari, K. Chadha, M. Jahazi, R. Tremblay, L. P. Lapierre-Boire. 2017 « Analysis of cracks and failure during solidification of a high strength low alloy steel ». 14th International Conference on Fracture (ICF 2017) (Rhodes, Greece, June 18-20, 2017) International Conference on Fracture
Abdelhalim Loucif, Davood Shahriari, Chunping P. Zhang, Mohammad Jahazi, Louis-Philippe Lapierre-Boire, Rami Tremblay. 2017 « Macrosegregation of alloying elements in hot top of large size high strength steel ingot ». International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Graz, Austria, May 29-June 03, 2016) Trans Tech Publications
Jacques Luk-Cyr, Rayan El-Bawab, Henri Champliaud, Jacques Lanteigne, Aurelian Vadean. 2017 « Sequential approximate optimization of industrial hammer peening using finite element simulations ». Structural and Multidisciplinary Optimization vol. 55 , nº 3. p. 767-778
Jacques Luk-Cyr, Daniel Paquet, Jacques Lanteigne, Henri Champliaud, Aurelian Vadean. 2017 « A unified plasticity methodology for rate- and temperature-sensitive alloys exhibiting a non-linear kinematic hardening behavior ». Acta Mechanica Solida Sinica vol. 30 , nº 1. p. 27-37
Omid Majidi, Mohammad Jahazi, Nicolas Bombardier, Ehab Samuel. 2017 « Variation of strain rate sensitivity index of a superplastic aluminum alloy in different testing methods ». 20th International ESAFORM Conference on Material Forming (ESAFORM) (Dublin, Ireland, Apr. 26-28, 2017) American Institute of Physics
Jorge Franklin Mansur Rodrigues Filho, Nicolas Tremblay, Soares da Fonseca Gláucio, Pierre Belanger. 2017 « The feasibility of structural health monitoring using the fundamental shear horizontal guided wave in a thin aluminum plate ». Materials vol. 10 , nº 5
Mohsen Marani, Victor Songmene, Ibrahem Maher. 2017 « Investigation on surface finish and tool condition while turning AL20 Mg2Si metal matrix composite ». Proceedings of The IRES International Conference (Teheran, Iran, June 12-13, 2017) The Institute of Research Engineers and Scientists International Conference
Mohsen Marani, Victor Songmene, Ibrahem Maher. 2017 « Investigation on surface finish and tool condition while turning AL20Mg2Si metal matrix composite ». International Journal of Advances in Science, Engineering and Technology vol. 5 , nº 3, Supp. 1. p. 11-14
F. Masoumi, D. Shahriari, M. Jahazi, J. Cormier, B. C. D. Flipo. 2017 « On the occurrence of liquation during linear friction welding of Ni-based superalloys ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 48A , nº 6. p. 2886-2899
Ahmad Mostafa, Ignacio Picazo Rubio, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2017 « Structure, texture and phases in 3D printed IN718 alloy subjected to homogenization and HIP treatments ». Metals vol. 7 , nº 6
Seyed Ali Niknam, Marek Balazinski, Victor Songmene. 2017 « To characterize and optimize the surface quality attributes in slot milling operation ». International Journal of Advanced Manufacturing Technology vol. 93 , nº 1-4. p. 727-746
Seyed Ali Niknam, Victor Songmene. 2017 « Burr formation and correlation with cutting force and acoustic emission signals ». Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture vol. 231 , nº 3. p. 399-414
Daniel Pereira, Guillaume Haiat, Julio Fernandes, Pierre Belanger. 2017 « Simulation of acoustic guided wave propagation in cortical bone using a semi-analytical finite element method ». Journal of the Acoustical Society of America vol. 141 , nº 4. p. 2538-2547
Marc Poirier, Martin Gagnon, Antoine Tahan, André Coutu, Joël Chamberland-lauzon. 2017 « Extrapolation of dynamic load behaviour on hydroelectric turbine blades with cyclostationary modelling ». Mechanical Systems and Signal Processing vol. 82. p. 193-205
Mohammad Saadati, Rasoul Azari Khosroshahi, Golamreza Ebrahimi, Mohammad Jahazi. 2017 « Twin-assisted precipitation during hot compression of an Mg-Gd-Zn-Zr magnesium alloy ». Materials Science and Engineering: A vol. 706. p. 142-152
Mohammad Saadati, Rasoul Azari Khosroshahi, Gholamreza Ebrahimi, Mohammad Jahazi. 2017 « Formation of precipitates in parallel arrays on LPSO structures during hot deformation of GZ41K magnesium alloy ». Materials Characterization vol. 131. p. 234-243
V. Sabri, S. Sattarpanah, S. A. Tahan, J. C. Cuillière, V. François, X. T. Pham. 2017 « A robust and automated FE-based method for fixtureless dimensional metrology of non-rigid parts using an improved numerical inspection fixture ». International Journal of Advanced Manufacturing Technology vol. 92 , nº 5-8. p. 2411-2423
S. Sarafan, P. Wanjara, J. Gholipour, H. Champliaud, L. Mathieu. 2017 « Mechanical properties of electron beam welds in heavy-section UNS S41500 martensitic stainless steel ». International Journal of Advanced Manufacturing Technology vol. 91 , nº 9/12. p. 4141-4150
Sheida Sarafan, Priti Wanjara, Javad Gholipour, Henri Champliaud, Louis Mathieu. 2017 « Mehanical properties of electron beam welded joints in thick gage CA6NM stainless steel ». Journal of Materials Engineering and Performance vol. 26 , nº 10. p. 4768-4780
Binhan Sun, Nicolas Vanderesse, Fateh Fazeli, Colin Scott, Jianqiang Chen, Philippe Bocher, Mohammad Jahazi, Stephen Yue. 2017 « Discontinuous strain-induced martensite transformation related to the Portevin-Le Chatelier effect in a medium manganese steel ». Scripta Materialia vol. 133. p. 9-13
Dhawal R. Thakare, Alexandre Abid, Daniel Pereira, Julio Fernandes, Pierre Belanger, Prabhu Rajagopal. 2017 « Semi-analytical finite-element modeling approach for guided wave assessment of mechanical degradation in bones ». International Biomechanics vol. 4 , nº 1. p. 17-27
Amèvi Tongne, Christophe Desrayaud, Mohammad Jahazi, Eric Feulvarch. 2017 « On material flow in friction stir welded al alloys ». Journal of Materials Processing Technology vol. 239. p. 284-296
Heithem Touazine, Jordan Akab, Mohammad Jahazi, Antoine Tahan, Walid Jomaa, Philippe Bocher. 2017 « Modeling of the microstructure alteration induced by hard turning of Inconel 718 ». International Journal of Advanced Manufacturing Technology vol. 93 , nº 9-12. p. 3705-3712
Heithem Touazine, Mohammad Jahazi, Philippe Bocher. 2017 « Accurate determination of damaged subsurface layers in machined Inconel 718 ». International Journal of Advanced Manufacturing Technology vol. 88 , nº 9-12. p. 3419-3427
Christophe Travaglini, Christophe Bescond, Martin Viens, Pierre Belanger. 2017 « Feasibility of high frequency guided wave crack monitoring ». Structural Health Monitoring vol. 16 , nº 4
C. Zhang, D. Shahriari, A. Loucif, L. -Ph. Lapierre-Boire, R. Tremblay, H. Melkonyan, M. Jahazi. 2017 « Influence des paramètres de coulée sur la macroségrégation des aciers à haute résistance mécanique dans les lingots de grande taille: expérimentation et modélisation ». Affiche présentée lors de la conférence : ASM-Montreal Student Night (Montreal, QC, Canada, March 15, 2017)
Chunping P. Zhang, Davood Shahriari, Abdelhalim Loucif, Mohammad Jahazi, Louis-Philippe Lapierre-Boire, Rami Tremblay. 2017 « Effect of segregated alloying elements on the high strength steel properties: Application to the large size ingot casting simulation ». TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings (San Diego, CA, USA, Feb. 26-Mar. 02, 2017) Springer International Publishing
Chunping Zhang, Davood Shahriari, Abdelhalim Loucif, Mohammad Jahazi, Louis-Philippe Lapierre-Boire, Rami Tremblay. 2017 « Effect of thermo-physical properties on solidification behavior of large size high strength steel ingots ». 7th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (SteelSim) (Qingdao, China, Aug. 16-17, 2017) The Chinese Society for Metals
Hector de Castilla, Pierre Bélanger, Ricardo J. Zednik. 2017 « Dynamic piezoelectric behavior of lithium niobate at high temperature ». International Conference oN Processing and Manufacturing Of Advanced Materials (THERMEC) (Graz, Austria, May 29-June 03, 2016) Trans Tech Publications
Hector de Castilla, Pierre Bélanger, Ricardo J. Zednik. 2017 « High temperature characterization of piezoelectric lithium niobate using electrochemical impedance spectroscopy resonance method ». Journal of Applied Physics vol. 122 , nº 24

Fatemeh Aghazadeh, M. Thomas, A. Tahan. 2016 « Effect of varying cutting parameters on the accuracy of tool wear monitoring in milling process ». CMVA Conference : Covering the Spectrum: From Fundamentals to Future Trends (Toronto, ON, Canada, Oct. 26-28, 2016)
Ali Aidibe, Mojtaba Kamali Nejad, Antoine Tahan, Mohammad Jahazi, Sylvain G. Cloutier. 2016 « A proposition for new quality 3D indexes to measure surface roughness ». 7th HPC 2016 - CIRP Conference on High Performance Cutting (Chemnitz, Germany, May 31-June 2, 2016) Elsevier
Ali Aidibe, Antoine Tahan, Vladimir Brailovski. 2016 « Metrological investigation of a selective laser melting additive manufacturing system: A case study ». IFAC-PapersOnLine vol. 49 , nº 31. p. 25-29
M. Anderson, F. Bridier, J. Gholipour, M. Jahazi, P. Wanjara, P. Bocher, J. Savoie. 2016 « Mechanical and metallurgical evolution of stainless steel 321 in a multi-step forming process ». Journal of Materials Engineering and Performance vol. 25 , nº 4. p. 1526-1538
Kaveh Babanezhad, Gilles Foucault, Antoine Tahan, Jean Bigeon. 2016 « A bi-criterion flexible registration method for fixtureless inspection of compliant parts ». 7th HPC 2016 - CIRP Conference on High Performance Cutting (Chemnitz, Germany, May 31-June 2, 2016) Elsevier
Pierre Belanger, Guillaume Boivin. 2016 « Development of a low frequency omnidirectional piezoelectric shear horizontal wave transducer ». Smart Materials and Structures vol. 25 , nº 4
Pierre Belanger, Guillaume Boivin. 2016 « Development of an omnidirectional SH0 piezoceramic transducer ». 42nd annual review of progress in quantitative nondestructive evaluation : incorporating the 6th European-American Workshop on Reliability of NDE (Minneapolis, MN, USA, July 26-31, 2015) AIP Publishing
Pierre Belanger, Guillaume Boivin. 2016 « Piezoceramic omnidirectional transduction of the fundamental shear horizontal guide wave mode ». Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, and Civil Infrastructure 2016 (Las Vegas, NV, USA, Mar. 20-24, 2016) SPIE
Mounia Berdai, Antoine Tahan, Martin Gagnon. 2016 « Imprecise probabilities in fatigue reliability assessment of hydraulic turbines ». ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering vol. 3 , nº 1
M. Berdal, S-A. Tahan, M. Gagnon. 2016 « Maintenance strategy in fatigue based on the Hasofer Lind reliability index ». 11th International Conference on Modeling, Optimization & Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM
Matthieu Bitterlin, Abdelhalim Loucif, Nicolas Charbonnier, Mohammad Jahazi, Louis-Philippe Lapierre-Boire, Jean-Benoît Morin. 2016 « Cracking mechanisms in large size ingots of high nickel content low alloyed steel ». Engineering Failure Analysis vol. 68. p. 122-131
Olivier Blancke, Antoine Tahan, Dragan Komljenovic, Normand Amyot, Claude Hudon, Melanie Lévesque. 2016 « A hydrogenerator model-based failure detection framework to support asset management ». 2016 IEEE International Conference on Prognostics and Health Management (ICPHM) (Ottawa, ON, Canada, June 20-22, 2016) IEEE
Guillaume Boivin, Nicolas Tremblay, Ricardo Zednik, Pierre Bélanger. 2016 « Piezoelectric low frequency shear horizontal guided wave transduction ». Journal of the Acoustical Society of America vol. 140 , nº 4. p. 3034-3034
Guillaume Boivin, Martin Viens, Pierre Belanger. 2016 « Development of a low frequency shear horizontal piezoelectric transducer for the generation of plane SH waves ». 42nd annual review of progress in quantitative nondestructive evaluation : incorporating the 6th European-American Workshop on Reliability of NDE (Minneapolis, MN, USA, July 26-31, 2015) AIP Publishing
P. Cambron, R. Lepvrier, C. Masson, A. Tahan, F. Pelletier. 2016 « Power curve monitoring using weighted moving average control charts ». Renewable Energy vol. 94. p. 126-135
K. Chadha, D. Shahriari, M. Jahazi. 2016 « Constitutive modelling of ingot breakdown process of low alloy steels ». Metallurgia Italiana vol. 108 , nº 4. p. 5-12
Kanwal Chadha, Davood Shahriari, Mohammad Jahazi. 2016 « Modeling metadynamic recrystallization of a die steel during ingot breakdown process ». NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes (Troyes, France, July 04-07, 2016) EDP Sciences
Henri Champliaud, Zhengkun Feng, David Provencher, Danick Tousignant, Javad Gholipour. 2016 « Piecewise fifth order spline interpolation for line heating forming process ». ASME International Mechanical Engineering Congress and Exposition (IMECE2016) (Phoenix, AZ, USA, Nov. 11-17, 2016) ASME
Q. Chatenet, A. Tahan, M. Gagnon, J. Chamberland-Lauzon. 2016 « Numerical model validation using experimental data: Application of the area metric on a Francis runner ». 28th IAHR symposium on Hydraulic Machinery and Systems (IAHR2016) (Grenoble, France, July 4-8, 2016) IOP Publishing
Pierre Comot, Philippe Bocher, Pierre Belanger. 2016 « Ultrasonic guided wave inspection of Inconel 625 brazed lap joints ». Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, and Civil Infrastructure 2016 (Las Vegas , NV, USA, Mar. 20-24, 2016) SPIE
Guillaume Corriveau, Raynald Guilbault, Antoine Tahan, Robert Sabourin. 2016 « Bayesian network as an adaptive parameter setting approach for genetic algorithms ». Complex & Intelligent Systems vol. 2 , nº 1. p. 1-22
I. Diagne, M. Gagnon, A. Tahan. 2016 « Modeling the dynamic behavior of turbine runner blades during transients using indirect measurements ». 28th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2016) (Grenoble, France, July 04-08, 2016) IOP Publishing Ltd.
Ameth Fall, Mostafa Hashemi Fesharaki, Ali Reza Khodabandeh, Mohammad Jahazi. 2016 « Tool wear characteristics and effect on microstructure in Ti-6Al-4V friction stir welded joints ». Metals vol. 6 , nº 11. p. 275-286
Mathieu Gendron, Éric Boudreault, Bruce Hazel, Xuan-Tan Pham, Henri Champliaud. 2016 « Non-linear optimization of a new robotic induction process for local heat treatment using thermal finite element analysis ». International Journal of Advanced Manufacturing Technology vol. 84 , nº 5. p. 1013-1029
Hadi Ghasemi-Nanesa, Heithem Touazine, Mohammad Jahazi. 2016 « Influence of cryogenic process parameters on microstructure and hardness evolution of AISI D2 tool steel ». International Journal of Advanced Manufacturing Technology vol. 85 , nº 1. p. 881-890
Rupanjit Grewal, Clodualdo Aranas, Kanwal Chadha, Davood Shahriari, Mohammad Jahazi, John J. Jonas. 2016 « Formation of Widmanstatten ferrite at very high temperatures in the austenite phase field ». Acta Materialia vol. 109. p. 23-31
Shreyank Gupta, Guillaume Haïat, Catherine Laporte, Pierre Bélanger. 2016 « Modeling wave propagation through the skull for ultrasonic transcranial Doppler ». Journal of the Acoustical Society of America vol. 140 , nº 4. p. 3189
Nathan Harris, Davood Shahriari, Mohammad Jahazi. 2016 « Analysis of void closure during open die forging process of large size steel ingots ». 16th Metal Forming International Conference (Krakow, Poland, Sept. 18-21, 2016)
I. Jbira, M. Tlija, B. Louhichi, A. Tahan. 2016 « CAD/Tolerancing integration: mechanical system with geometric defects ». 11th International Conference on Modeling, Optimization & Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM
W. Jomaa, J. Mechri, J. Lévesque, A. Gakwaya, V. Songmene, P. Bocher. 2016 « Finite element analysis of serrated chip formation in machining of 7075-T651 alluminum alloy ». XXVIII International Mineral Processing Congress (IMPC) (Québec, QC, Canada, Sept. 11-15, 2016)
W. Jomaa, V. Songmene, P. Bocher. 2016 « An investigation of machining-induced residual stresses and microstructure of induction-hardened AISI 4340 steel ». Materials and Manufacturing Processes vol. 31 , nº 7. p. 838-844
Walid Jomaa, Victor Songmene, Philippe Bocher. 2016 « An hybrid approach based on machining and dynamic tests data for the identification of material constitutive equations ». Journal of Materials Engineering and Performance vol. 25 , nº 3. p. 1010-1027
A. Joubair, A. S. Tahan, I. A. Bonev. 2016 « Performances of observability indices for industrial robot calibration ». IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (Daejeon, South Korea, Oct. 09-14, 2016) IEEE
Sasan Sattarpanah Karganroudi, Jean-Christophe Cuillière, Vincent Francois, Souheil-Antoine Tahan. 2016 « Automatic fixtureless inspection of non-rigid parts based on filtering registration points ». International Journal of Advanced Manufacturing Technology vol. 87 , nº 1. p. 687-712
M. Kedadouche, M. Thomas, A. Tahan. 2016 « A comparative study between empirical wavelet transforms and empirical mode decomposition methods: application to bearing defect diagnosis ». Mechanical Systems and Signal Processing vol. 81. p. 88-107
Mourad Kedadouche, Marc Thomas, Antoine Tahan. 2016 « Empirical mode decomposition combined with empirical wavelets for extracting bearing frequencies in a noisy environment and early detection of defects ». Advances in Condition Monitoring of Machinery in Non-Stationary Operations: Proceedings of the Fourth International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO'2014, Lyon, France December 15-17 (Lyon, France, Dec. 15-17, 2014) Springer International Publishing
Guy-Richard Kibouka, Donatien Nganga-Kouya, Jean-Pierre Kenne, Victor Songmene, Vladimir Polotski. 2016 « Production planning of a failure-prone manufacturing system under different setup scenarios ». Journal of Applied Mathematics vol. 2016
A. F. Kouedeu, J-P. Kenné, V. Songmene. 2016 « Hybrid control of processing/reprocessing rates for a deteriorated manufacturing system ». 11th International Conference on Modeling, Optimization & Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM
Jacques Luk-Cyr, Rayan El-Bawab, Jacques Lanteigne, Henri Champliaud, Aurelian Vadean. 2016 « Mechanical properties of 75% Ar /25% CO2 flux-cored arc welded E309L austenitic stainless steel ». Materials Science and Engineering: A vol. 678. p. 197-203
Marc Jr. Lépine, Antoine S. Tahan. 2016 « The relationship between geometrical complexity and process capability ». Journal of Manufacturing Science and Engineering vol. 138 , nº 5
J. B. Mandatsy Moungomo, D. Nganga-Kouya, V. Songmene, J. Kouam, J. P. Kenné. 2016 « Machinability study of recycled aluminum cans and machining chips ». International Journal of Advanced Manufacturing Technology vol. 87 , nº 9. p. 2551-2566
Jean Brice Mandatsy Moungomo, Donatien Nganga Kouya, Victor Songmene. 2016 « Aluminium machining chips formation, treatment recycling: A review ». 13th International Aluminium Conference (INALCO 2016) (Naples, Italy, Sept. 21-23, 2016) Trans Tech Publications Ltd
Jean Brice Mandatsy Moungomo, Donatien Nganga Kouya, Victor Songmene. 2016 « Turning and drilling machinability of recycled aluminum alloys ». 13th International Aluminium Conference (INALCO) (Naples, Italy, Sept. 21-23, 2016) Trans Tech Publications Ltd
F. Masoumi, M. Jahazi, D. Shahriari, J. Cormier. 2016 « Coarsening and dissolution of γ′ precipitates during solution treatment of AD730™ Ni-based superalloy: Mechanisms and kinetics models ». Journal of Alloys and Compounds vol. 658. p. 981-995
F. Masoumi, D. Shahriari, M. Jahazi, J. Cormier, A. Devaux. 2016 « Kinetics and mechanisms of γ′ reprecipitation in a Ni-based superalloy ». Scientific Reports vol. 6
Mahdi Masoumi, Yasser Zedan, Damien Texier, Mohammad Jahazi, Philippe Bocher. 2016 « Friction stir welding of AA2024 and AA2198 Aluminum alloys: effect of tool geometry and process parameters ». 2nd International Conference on Welding and Non Destructive Testing (ICWNDT) (Tehran, Iran, Dec. 20-21, 2016)
Mahdi Masoumi, Yasser Zedan, Damien Texier, Mohammad Jahazi, Philippe Bocher. 2016 « The influence of tool geometry on mechanical properties of friction stir welded AA-2024 and AA-2198 joints ». 34th International Conference and Exhibition of ICSOBA (Quebec, QC, Canada, Oct. 03-06, 2016) The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA)
Hadi Ghasemi Nanesa, Julien Boulgakoff, Mohammad Jahazi. 2016 « Influence of prior cold deformation on microstructure evolution of AISI D2 tool steel after hardening heat treatment ». Journal of Manufacturing Processes vol. 22. p. 115-119
Seyed Ali Niknam, Jules Kouam, Victor Songmene. 2016 « Experimental investigation on part quality and metallic particle emission when milling 6061-T6 aluminium alloy ». International Journal of Machining and Machinability of Materials vol. 18 , nº 1-2. p. 120-137
Francis Pelletier, Christian Masson, Antoine Tahan. 2016 « Wind turbine power curve modelling using artificial neural network ». Renewable Energy vol. 89. p. 207-214
Antoine Proteau, S.-Antoine Tahan, Roland Maranzana, Pascal Lavoie. 2016 « Proposition d'un modèle d'estimation de la complexité géométrique d'un porduit usine basé sur la maquette 3D ». 11th International Conference on Modeling, Optimization & Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM
M. Saboori, H. Champliaud, J. Gholipour, A. Gakwaya, J. Savoie, P. Wanjara. 2016 « Extension of flow stress-strain curves of aerospace alloys after necking ». International Journal of Advanced Manufacturing Technology vol. 83 , nº 1-4. p. 313-323
M. Saboori, J. Gholipour, H. Champliaud, P. Wanjara, A. Gakwaya, J. Savoie. 2016 « Prediction of burst pressure in multistage tube hydroforming of aerospace alloys ». Journal of Engineering for Gas Turbines and Power vol. 138 , nº 8
V. Sabri, S. A. Tahan, X. T. Pham, D. Moreau, S. Galibois. 2016 « Fixtureless profile inspection of non-rigid parts using the numerical inspection fixture with improved definition of displacement boundary conditions ». International Journal of Advanced Manufacturing Technology vol. 82 , nº 5-8. p. 1343-1352
Emad Salari, Mohammad Jahazi, Alireza Khodabandeh, Hadi Ghasemi Nanesa. 2016 « Friction stir lap welding of 5456 aluminum alloy with different sheet thickness: process optimization and microstructure evolution ». International Journal of Advanced Manufacturing Technology vol. 82 , nº 1-4. p. 39-48
Jamel Salem, Henri Champliaud, Zhengkun Feng, Thien-My Dao. 2016 « Experimental analysis of an asymmetrical three-roll bending process ». International Journal of Advanced Manufacturing Technology vol. 83 , nº 9. p. 1823-1833
S. Sarafan, J.-B. Lévesque, P. Wanjara, J. Gholipour, H. Champliaud. 2016 « Distortion and residual stresses in electron beam-welded hydroelectric turbine materials ». Science and Technology of Welding and Joining vol. 21 , nº 6. p. 473-478
S. Sarafan, P. Wanjara, J. Gholipour, H. Champliaud. 2016 « Global and local characteristics of an autogenous single pass electron beam weld in thick gage UNS S41500 steel ». Materials Science and Engineering: A vol. 666. p. 360-371
G. D. Sathiaraj, C. W. Tsai, J. W. Yeh, M. Jahazi, P. P. Bhattacharjee. 2016 « The effect of heating rate on microstructure and texture formation during annealing of heavily cold-rolled equiatomic CoCrFeMnNi high entropy alloy ». Journal of Alloys and Compounds vol. 688. p. 752-761
Sasan Sattarpanah Karganroudi, Jean-Christophe Cuillière, Vincent François, Souheil-Antoine Tahan. 2016 « Modeling and numerical simulation of multi-layered fiber-reinforced materials applied for non-rigid parts deformation during assembly process ». Communication lors de la conférence : 7e colloque québécois sur le développement numérique de produits (CAO/FAO) (Montréal, QC, Canada, 4 mai 2016)
D. Shahriari, A. Loucif, N. Harris, Y. Bouissa, M. Jahazi, L. P. Lapierre-Boire, N. Poulain. 2016 « Comprehensive simulation of solidification, forging and heat treatment process of large size high strength steel ingots ». Communication lors de la conférence : The 31st Forging Industry Technical Conference (Colombus, OH, USA, Sept. 19-20, 2016)
Amir Masoud Tahvilian, Bruce Hazel, Farzad Rafieian, Zhaoheng Liu, Henri Champliaud. 2016 « Force model for impact cutting grinding with a flexible robotic tool holder ». International Journal of Advanced Manufacturing Technology vol. 85 , nº 1. p. 133-147
A. Tongne, H. Robe, C. Desrayaud, M. Jahazi, E. Feulvarch. 2016 « Two dimensional Coupled Eulerian Lagrangian (CEL) model for banded structure prediction in friction stir welding with trigonal tool ». ESAFORM 2016: 19th International ESAFORM Conference on Material Forming (Nantes, France, Apr. 27-29, 2016) American Institute of Physics
Christophe Travaglini, Christophe Bescond, Dermartonne Ramos Franca, Silvio E. Kruger, Martin Viens, Pierre Bélanger. 2016 « Scattering of high order guided wave modes around a through-thickness circular hole ». 42nd annual review of progress in quantitative nondestructive evaluation : incorporating the 6th European-American Workshop on Reliability of NDE (Minneapolis, MN, USA, July 26-31, 2015) AIP Publishing
Mariem Zoghlami, Mohammad Jahazi, Victor Songmene. 2016 « The effects of friction stir welding parameters on the characteristics of banded structure for aluminum alloys ». 13th International Aluminium Conference (INALCO) (Naples, Italy, Sept. 21-23, 2016) Trans Tech Publications Ltd
Mariem Zoghlami, Hossein Monajati, Mohammad Jahazi, Victor Songmene. 2016 « Microstructural analysis of banded structure in friction stir welding of AA6082 aluminum alloy ». Communication lors de la conférence : 34th International Conference and Exhibition of ICSOBA (the International Committee for Study of Bauxite, Alumina & Aluminium) (Québec, QC, Canada, Oct. 03-06, 2016)

Gad N. Abenhaim, Alain Desrochers, Antoine S. Tahan, Jean Bigeon. 2015 « A finite-element boundary condition setting method for the virtual mounting of compliant components ». Journal of Computing and Information Science in Engineering vol. 15 , nº 4
Gad N. Abenhaim, Alain Desrochers, S.-Antoine Tahan, Jean Bigeon. 2015 « A virtual fixture using a FE-based transformation model embedded into a constrained optimization for the dimensional inspection of nonrigid parts ». Computer-Aided Design vol. 62. p. 248-258
Alexandre Abid, Dhawal Thakare, Daniel Pereira, Prabu Rajagopal, Julio Fernandes, Pierre Bélanger. 2015 « Guided wave velocity sensitivity to bone mechanical property evolution in cortical-marrow and cortical-trabecular phantoms ». 170th Meeting of the Acoustical Society of America (Jacksonville, FL, USA, Nov. 2-6, 2015)
Ali Aidibe, Antoine Tahan. 2015 « The Coherent Point Drift algorithm adapted for fixtureless metrology of non-rigid parts ». 13th CIRP Conference on Computer Aided Tolerancing, CAT 2014, May 11, 2014 - May 14, 2014 (Hangzhou, China, May 11-14, 2014) Elsevier
Ali Aidibe, S.-Antoine Tahan. 2015 « Adapting the coherent point drift algorithm to the fixtureless dimensional inspection of compliant parts ». International Journal of Advanced Manufacturing Technology vol. 79 , nº 5. p. 831-841
Clodualdo Aranas, Rupanjit Grewal, Kanwal Chadha, Davood Shahriari, Mohammad Jahazi, John J. Jonas. 2015 « Formation of widmanstätten ferrite in a C-Mn steel at temperatures high in the austenite phase field ». International Conference on Solid-Solid Phase Transformations in Inorganic Materials 201 (PTM 2015) (Whistler, BC, Canada, June 28, 2015 - July 3, 2015) International Conference on Solid-Solid Phase Transformations in Inorganic Materials
Jérémy Arpin-Pont, Martin Gagnon, S.-Antoine Tahan, André Coutu, Denis Thibault. 2015 « Methodology for estimating strain gauge measurement biases and uncertainties on isotropic materials ». Journal of Strain Analysis for Engineering Design vol. 50 , nº 1. p. 40-50
A. Bahloul, A. Djebara, M. N. Saidi, V. Songmene. 2015 « Simulating grinding dust dispersion and assessment of the efficiency of local capture ventilation ». Proceedings of the 11th International Conference on Industrial Ventilation (Ventilation 2015) (Shanghai, China, Oct. 26-28, 2015) International Conference on Industrial Ventilation
Pierre Belanger. 2015 « Remnant thickness mapping using high order shear horizontal modes ». ASNT 24th research symposium (Anaheim, CA, USA, Mar. 16-19, 2015) American Society for Nondestructive Testing
T. Belhadj, V. Songmene, M. Jahazi. 2015 « Influence des paramètres de procédé sur la distorsion de grandes plaques d'aluminium formées par thermoformage : phase d'éjection ». Affiche présentée lors de la conférence : Journée des étudiants du REGAL (Chicoutimi, QC, Canada, 11 nov. 2015)
Olivier Blancke, Normand Amyot, Claude Hudon, Mélanie Lévesque, Antoine Tahan. 2015 « A new generic approach to convert FMEA in causal trees for the purpose of hydro-generator rotor failure mechanisms identification ». Annual Conference of the Prognostics and Health Management Society 2015 (Coronado, CA, USA, Oct. 18-24, 2015) PHM Society
Hamid Habibzadeh Boukani, Samir Mourad Chentouf, Martin Viens, Antoine Tahan, Martin Gagnon. 2015 « The effect of martensitic stainless steel microstructure on the ultrasonic inspection of turbine runner joints ». 41ST Annual Review of Progress in Quantitative Nondestructive Evaluation (Boise, ID, USA, July 20-25, 2014) AIP - American Institute of Physics
Mathieu Carrier, Mathieu Dansereau, Julio Fernandes, Jean-Sébastien Mérette, Yvan Petit, Victor Songmene. 2015-05-12 « Alésoir acétabulaire ». Brevet canadien CA 2696990.
K. Chadha, D. Shahriari, M. Jahazi. 2015 « Constitutive modelling of ingot breakdown process of low alloy steels ». 6th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (SteelSim 2015) (Bardolino, Italy, Sept. 23-25, 2015) Associazione Italiana di Metallurgia
Kanwal Chadha, Pinaki Prasad Bhattacharjee, Mohammad Jahazi. 2015 « The effect of strain reversal during high pressure torsion on the microstructure evolution and texture of aluminum alloys ». Characterization of Minerals, Metals, and Materials 2015 - TMS 2015 144th Annual Meeting and Exhibition, March 15, 2015 - March 19, 2015 (Orlando, FL, USA, March 15-19, 2015) Minerals, Metals and Materials Society
Kanwal Chadha, Mohammad Jahazi, Abdelhalim Loucif, Davood Shahriari. 2015 « Effect of deformation temperature and interpass time on microstructure evolution and mechanical properties of medium carbon low alloy steel during ingot breakdown process ». 2015 TMS Annual Meeting & Exhibition : Phase Transformations and Microstructural Evolution (Orlando, FL, Canada, Mar. 15-19, 2015)
A. Chamanfar, M. Jahazi, A. Bonakdar, E. Morin, A. Firoozrai. 2015 « Cracking in fusion zone and heat affected zone of electron beam welded Inconel-713LC gas turbine blades ». Materials Science and Engineering: A vol. 642. p. 230-240
A. Chamanfar, Mohammad Jahazi, J. Cormier. 2015 « A review on inertia and linear friction welding of Ni-based superalloys ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 46 , nº 4. p. 1639-1669
A. Chamanfar, Mohammad Jahazi, J. Gholipour, P. Wanjara, S. Yue. 2015 « Analysis of integrity and microstructure of linear friction welded Waspaloy ». Materials Characterization vol. 104. p. 149-161
Samir Mourad Chentouf, T. Belhadj, N. Bombardier, M. Jahazi. 2015 « Influence of reduction rate on the characteristics of cavities in superplastically formed 5083 aluminum alloy ». 54th annual conference of metallurgists (COM 2015) (Toronto, ON, Canada, Aug. 23-26, 2015)
Guillaume Corriveau, Raynald Guilbault, Antoine Tahan, R. Sabourin. 2015 « Evaluation of genotypic diversity measurements exploited in real-coded representation ». arXiv. 13 p.
Zhengkun Feng, Henri Champliaud. 2015 « Modeling and simulation based on finite element method for electron beam welding process ». 27th European Modeling and Simulation Symposium (EMSS) (Bergeggi, Italy, Sept. 21-23, 2015) Dime University of Genoa
Zhengkun Feng, Henri Champliaud. 2015 « Modeling and simulation for pressing process with reconfigurable punch and die ». ASME 2015 Pressure Vessels and Piping Conference (Boston, MA, USA, July 19-23, 2015) American Society of Mechanical Engineers
Kouedeu Annie Francie, Kenne Jean-Pierre, Dejax Pierre, Songmene Victor, Polotski Vladimir. 2015 « Stochastic models and numerical solutions for manufacturing/remanufacturing systems with applications to the printer cartridge industry ». Journal of Manufacturing Systems vol. 37 , nº Part 3. p. 662-671
H. Ghasemi Nanesa, Mohammad Jahazi. 2015 « Alternative phase transformation path in cryogenically treated AISI D2 tool steel ». Materials Science and Engineering: A vol. 634. p. 32-36
Hadi Ghasemi-Nanesa, Mohammad Jahazi, Reza Naraghi. 2015 « Martensitic transformation in AISI D2 tool steel during continuous cooling to 173K ». Journal of Materials Science vol. 50 , nº 17. p. 5758-5768
Mourad Kedadouche, Marc Thomas, Antoine Tahan. 2015 « A hybrid method combining Teager Kaiser energy operator, empirical mode decomposition and minimum entropy deconvolution for monitoring gears damages ». Mechanics and Industry vol. 16 , nº 6
Mourad Kedadouche, Marc Thomas, Antoine Tahan, Raynald Guilbault. 2015 « Monitoring gears by vibration measurements: Lempel-Ziv complexity and approximate entropy as diagnostic tools ». 4th Colloque Experimental Vibration Analysis, AVE 2014, November 18, 2014 - November 20, 2014 (Blois, France, Nov. 18-20, 2014) EDP Sciences
Mourad Kedadouche, Marc Thomas, Antoine Tahan, Raynald Guilbault. 2015 « Nonlinear parameters for monitoring gear: comparison between lempel-ziv, approximate entropy, and sample entropy complexity ». Shock and Vibration vol. 2015
Hamed Khakpour, Lionel Birglen, Souheil-Antoine Tahan. 2015 « Analysis and optimization of a new differentially driven cable parallel robot ». Journal of Mechanisms and Robotics vol. 7 , nº 3
Hamed Khakpour, Lionel Birglen, Souheil-Antoine Tahan. 2015 « Uniform scanning path generation for abrasive waterjet polishing of free-form surfaces modeled by triangulated meshes ». International Journal of Advanced Manufacturing Technology vol. 77 , nº 5. p. 1167-1176
Jules Kouam, Victor Songmene, Marek Balazinski, Patrick Hendrick. 2015 « Effects of minimum quantity lubricating (MQL) conditions on machining of 7075-T6 aluminum alloy ». International Journal of Advanced Manufacturing Technology vol. 79 , nº 5. p. 1325-1334
A. F. Kouedeu, J.-P. Kenné, P. Dejax, V. Songmene, V. Polotski. 2015 « Production and maintenance planning for a failure-prone deteriorating manufacturing system: a hierarchical control approach ». International Journal of Advanced Manufacturing Technology vol. 76 , nº 9. p. 1607-1619
Abdelhalim Loucif, Emna Ben Fredj, Mohammad Jahazi, Louis-Philippe Lapierreboire, Rami Tremblay, Raymond Beauvais. 2015 « Analysis of macrosegregation in large size forged ingot of high strength steel ». Proceedings of the 6th International Congress on the Science and Technology of Steelmaking (ICS 2015) (Beijing, China, May 12-14, 2015) Chinese Society for Metals
Borhen Louhichi, Gad N. Abenhaim, Antoine S. Tahan. 2015 « CAD/CAE integration: updating the CAD model after a FEM analysis ». International Journal of Advanced Manufacturing Technology vol. 76 , nº 1. p. 391-400
Borhen Louhichi, Mehdi Tlija, Abdelmajid Benamara, Antoine Tahan. 2015 « An algorithm for CAD tolerancing integration: Generation of assembly configurations according to dimensional and geometrical tolerances ». Computer-Aided Design vol. 62. p. 259-274
Ilyes Maamri, Noureddine Barka, Abderrazak El Ouafi, Mohammad Jahazi. 2015 « A sensitivity study of 4340 steel hardness profile heat-treated by laser ». International Journal of Emerging Technology and Advanced Engineering vol. 5 , nº 9. p. 7-13
Hadi Ghasemi Nanesa, Mohammad Jahazi, Tom Levasseur. 2015 « On the martensitic transformation of AISI D2 tool steel through cryogenic cooling ». International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 (PTM 2015) (Whistler, BC, Canada, June 28-July 3, 2015) International Conference on Solid-Solid Phase Transformations in Inorganic Materials
Hadi Ghasemi Nanesa, Mohammad Jahazi, Tom Levasseur. 2015 « Transmission electron microscopy study of micro-structure evolution in cryotreated AISI D2 tool steel ». International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 (PTM 2015) (Whistler, BC, Canada, June 28-July 3, 2015) International Conference on Solid-Solid Phase Transformations in Inorganic Materials
Seyed Ali Niknam, Victor Songmene. 2015 « Milling burr formation, modeling and control: A review ». Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture vol. 229 , nº 6. p. 893-909
Daniel Pereira, Alexandre Abid, Lucien Diotaveli, Julio Fernandes, Pierre Belanger. 2015 « Axial transmission assessment of trabecular bone at distal radius using guided waves ». 170th Meeting of the Acoustical Society of America (Jacksonville, FL, USA, Nov. 2-6, 2015)
M. Saboori, J. Gholipour, H. Champliaud, A. Gakwaya, P. Wanjara, J. Savoie. 2015 « Prediction of burst pressure in multi stage tube hydroforming of aerospace alloys ». ASME Turbo Expo 2015: Turbine Technical Conference and Exposition (GT 2015) (Montreal, QC, Canada, June 15-19, 2015) American Society of Mechanical Engineers (ASME)
M. N. Saidi, Victor Songmene, J. Kouam, A. Bahloul. 2015 « Experimental investigation on fine particle emission during granite polishing process ». International Journal of Advanced Manufacturing Technology vol. 81 , nº 9. p. 2109-2121
S. Sarafan, P. Wanjara, Henri Champliaud, D. Thibault. 2015 « Characteristics of an autogenous single pass electron beam weld in thick gage CA6NM steel ». International Journal of Advanced Manufacturing Technology vol. 78 , nº 9. p. 1523-1535
Sasan Sattarpanah Karganroudi, Jean-Christophe Cuillière, Vincent Francois, Souheil-Antoine Tahan. 2015 « An improvement of fixtureless inspection for non-rigid parts based on filtering sample points ». 25th Canadian Congress of Applied Mechanics (London, ON, Canada, May 31 - June 4, 2015)
Sasan Sattarpanah Karganroudi, Jean-Christophe Cuillière, Vincent Francois, Souheil-Antoine Tahan. 2015 « Inspection automatique de pièces flexibles sans gabarit de conformité ». Affiche présentée lors de la conférence : 22e édition du Concours d’affiches scientifiques de l'Université du Québec à Trois-Rivières (UQTR) (Trois-Rivières, QC, Canada, 25-26 mars 2015)
D. Shahriari, Abdelhalim Loucif, Mohammad Jahazi, R. Tremblay, R. Beauvais. 2015 « 3D numerical simulation of solidification of large size ingots of high strength steels ». 6th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (STEELSIM2015) (Bardolino, Italy, Sept. 23-25, 2015)
Victor Songmene, Riad Khettabi, Martin Viens, Jules Kouam, Stéphane Hallé, François Morency, Jacques Masounave, Abdelhakim Djebara. 2015 « Nanoparticle measurement, control and characterization: procedure applied to machining and mechanical friction ». IRSST. 82 p.
Victor Songmene, R. Njoya Doko. 2015 « Fine metallic particle emission when milling aluminium alloys and aluminium metal matrix composites ». 7th Light Metals Technology Conference (LMT2015) (Port Elizabeth, South Africa, July 27-29, 2015) Trans Tech Publications
Amir Masoud Tahvilian, Zhaoheng Liu, Henri Champliaud, Bruce Hazel, Marin Lagacé. 2015 « Characterization of grinding wheel grain topography under different robotic grinding conditions using confocal microscope ». International Journal of Advanced Manufacturing Technology vol. 80 , nº 5. p. 1159-1171
Dhawal R. Thakare, Pierre Belanger, Prabhu Rajagopal. 2015 « Effect of dimensional degradation on ultrasonic guided waves in bone system ». ICU International Congress on Ultrasonics (ICU) (Metz, France, May 11-14, 2015) Elsevier
Dhawal R. Thakare, Prabhu Rajagopal, Pierre Belanger. 2015 « Ultrasonic guided waves in bone system with degradation ». 170th Meeting of the Acoustical Society of America (Jacksonville, FL, USA, Nov. 2-6, 2015) Acoustical Society of America
A. Tongne, Mohammad Jahazi, E. Feulvarch, C. Desrayaud. 2015 « Banded structures in friction stir welded Al alloys ». Journal of Materials Processing Technology vol. 221. p. 269-278
Amèvi Tongne, Christophe Desrayaud, Mohammad Jahazi, Eric Feulvarch. 2015 « Analytical modeling of material flow in friction stir welding ». 11th International Seminar on Numerical Analysis of Weldability (Graz, Austria, Sept. 27-30, 2015)

Ali Aidibe, Antoine Tahan. 2014 « The inspection of deformable bodies using curvature estimation and Thompson-Biweight test ». International Journal of Advanced Manufacturing Technology vol. 71 , nº 9-12. p. 1733-1747
Noureddine Barka, Ahmed Chebak, Abderrazak El Ouafi, Mohammad Jahazi, Abdellah Menou. 2014 « A new approach in optimizing the induction heating process using flux concentrators: Application to 4340 steel spur gear ». Journal of Materials Engineering and Performance vol. 23 , nº 9. p. 3092-3099
H. H. Boukani, Martin Viens, S.-Antoine Tahan, M. Gagnon. 2014 « On the performance of nondestructive testing methods in the hydroelectric turbine industry ». 27th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2014) (Montreal, QC, Canada, Sept. 22-26, 2014) IOP Publishing
Pierre Bélanger. 2014 « High order shear horizontal modes for minimum remnant thickness ». Ultrasonics vol. 54 , nº 4. p. 1078-1087
A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, S. Yue. 2014 « Evolution of flow stress and microstructure during isothermal compression of Waspaloy ». Materials Science and Engineering: A vol. 615. p. 497-510
S. M. Chentouf, M. Jahazi, L. P. Lapierre-Boire, S. Godin. 2014 « Characteristics of austenite transformation during post forge cooling of large-size high strength steel Ingots ». Metallography, Microstructure, and Analysis vol. 3 , nº 4. p. 281-297
Samir Mourad Chentouf, Mohammad Jahazi, Rejean Fortin. 2014 « Influence of the quench process on microstructure evolution in a landing gear steel ». ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014) American Society of Mechanical Engineers (ASME)
Mostafa Dadaei, Hamid Omidvar, Behrouz Bagheri, Mohammad Jahazi, Mahmoud Abbasi. 2014 « The effect of SiC/Al2O3 particles used during FSP on mechanical properties of AZ91 magnesium alloy ». International Journal of Materials Research vol. 105 , nº 4. p. 369-374
M. Daoud, W. Jomaa, Jean-François Chatelain, Abdel-Hakim Bouzid, Victor Songmene. 2014 « Identification of material constitutive law constants using machining tests: A response surface methodology based approach ». 2014 International Conference on High Performance and Optimum Design of Structures and Materials, HPSM 2014 which incorporated the Seminar on Optimum Design in Engineering, OPTI 2014 (Ostend, Belgium, June 9-11, 2014) WITPress
Abdelhakim Djebara, Ali Bahloul, Bernard Wenga Ntcheping, Victor Songmene. 2014 « Dilution method to characterize fine and ultrafine particle at high concentrations ». Conference Proceedings : 1st International Conference on Atmospheric Dust : DUST 2014 (Castellaneta Marina, Italy, June 1-6, 2014) Digilabs Publishing
Abdelhakim Djebara, Ali Bahloul, Victor Songmene. 2014 « Technique de dilution des concentrations de la poussière émise lors de la transformation des matériaux ». 36e Congrès de l'AQHSST :Bien s'outiller pour intervenir: se développer, se spécialiser, se renouveler : Congrès de l'Association québécoise pour l’hygiène, la santé et la sécurité du travail (Beaupré, QC, Canada, 7-9 mai 2014) Association québécoise pour l’hygiène, la santé et la sécurité du travail
Gholam Reza Ebrahimi, Amir Momeni, Mohammad Jahazi, Philippe Bocher. 2014 « Dynamic recrystallization and precipitation in 13Cr super-martensitic stainless steels ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 45 , nº 4. p. 2219-2231
S. Mojarad Farimani, J. Gholipour, Henri Champliaud, J. Savoie, P. Wanjara. 2014 « Numerical and experimental study of preforming stage in tube hydroforming ». Material Forming ESAFORM 2014 (Espoo, Finland, May 7-9, 2014) Trans Tech Publications Ltd
Zhengkun Feng, Henri Champliaud. 2014 « Analyses of profile radial-axial ring rolling process based on explicit finite element method ». American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Anaheim, CA, USA, July 20-24, 2014) American Society of Mechanical Engineers (ASME)
Zhengkun Feng, Henri Champliaud. 2014 « FEM analysis of radial-axial profile ring rolling process ». 26th European Modeling and Simulation Symposium, EMSS 2014 (Bordeaux, France, Sept. 10-12, 2014) Dime University of Genoa
Zhengkun Feng, Henri Champliaud. 2014 « Using pyramidal three-roll bending process to improve the quality of seemed cylinders ». ASME 2013 International Mechanical Engineering Congress and Exposition : November 15-21, 2013, San Diego, California, USA. (San Diego, CA, USA, Nov. 15-21, 2013 ) ASME
Martin Gagnon, Antoine Tahan, Philippe Bocher, Denis Thibault. 2014 « Influence of load spectrum assumptions on the expected reliability of hydroelectric turbines: A case study ». Structural Safety vol. 50. p. 1-8
Hadi Ghasemi-Nanesa, Mohammad Jahazi. 2014 « Simultaneous enhancement of strength and ductility in cryogenically treated AISI D2 tool steel ». Materials Science and Engineering: A vol. 598. p. 413-419
Hadi Ghasemi-Nanesa, Mohammad Jahazi, Gil Trigo, Tom Levasseur. 2014 « Influence of cryogenic treatment on microstructure characteristics and mechanical properties of AISI D2 tool steel ». TMS 2014 Supplemental Proceedings John Wiley & Sons, Inc.
W. Jomaa, Victor Songmene, Philippe Bocher. 2014 « Surface finish and residual stresses induced by orthogonal dry machining of AA7075-T651 ». Materials vol. 7 , nº 3. p. 1603-1624
Walid Jomaa, Monzer Daoud, Victor Songmene, Philippe Bocher, Jean-François Châtelain. 2014 « Identification and validation of Marusich's constitutive law for finite element modeling of high speed machining ». ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014) American Society of Mechanical Engineers (ASME)
Walid Jomaa, Victor Songmene, Philippe Bocher. 2014 « Material behavior modeling during high speed machining of 6061-T6 and 7075-T651 alloys ». Affiche présentée lors de la conférence : Journée des étudiants du REGAL (JER2014) (Sherbrooke, QC, Canada, Nov. 18, 2014)
R. Kamguem, S.-Antoine Tahan, Victor Songmene. 2014 « Surface roughness estimation of turned parts from optical image measurements and wavelet decomposition ». International Journal of Materials Forming and Machining Processes vol. 1 , nº 1. p. 48-72
M. Kedadouche, M. Thomas, A. Tahan. 2014 « Cyclostationarity applied to acoustic emission and development of a new indicator for monitoring bearing defects ». Mechanics and Industry vol. 15 , nº 6. p. 467-476
M. Kedadouche, Marc Thomas, Antoine Tahan. 2014 « Monitoring machines by using a hybrid method combining MED, EMD, and TKEO ». Advances in Acoustics and Vibration vol. 2014
Mourad Kedadouche, Marc Thomas, Antoine Tahan. 2014 « Empirical mode decomposition of acoustic emission for early detection of bearing defects ». Advances in Condition Monitoring of Machinery in Non-Stationary Operations : Proceedings of the third International Conference on Condition Monitoring of Machinery in Non-Stationary Operations CMMNO 2013 (Ferrara, Italy, ) Springer Berlin Heidelberg
R. Keivani, Mohammad Jahazi, Tan Pham, A. R. Khodabandeh, M. R. Afshar. 2014 « Predicting residual stresses and distortion during multisequence welding of large size structures using FEM ». International Journal of Advanced Manufacturing Technology vol. 73 , nº 1-4. p. 409-419
H. Khakpour, L. Birglen, S.-Antoine Tahan. 2014 « Synthesis of differentially driven planar cable parallel manipulators ». IEEE Transactions on Robotics vol. 30 , nº 3. p. 619-630
H. Khakpour, L. Birglenl, S.-Antoine Tahan, F. Paquet. 2014 « Experimental study on abrasive waterjet polishing of hydraulic turbine blades ». 27th IAHR Symposium on Hydraulic Machinery and Systems, IAHR 2014 (Montreal, QC, Canada, Sept. 22-26, 2014) Institute of Physics Publishing
Jules Kouam, Abdelhakim Djebara, Victor Songmene. 2014 « Experimental investigation on the effect of pre-holes on drilling process performance of aluminum alloys: forces, surface finish and dust emission ». Advances in Materials Science and Applications vol. 3 , nº 1. p. 13-23
A. F. Kouedeu, J. P. Kenné, P. Dejax, V. Songmene, V. Polostki. 2014 « Stochastic models and numerical solutions for manufacturing/remanufacturing systems with applications to the printer cartridge industry ». Affiche présentée lors de la conférence : Journée des étudiants du REGAL (JER2014) (Sherbrooke, QC, Canada, Nov. 18, 2014)
Annie Francie Kouedeu, Jean-Pierre Kenné, Pierre Dejax, Victor Songmene, Vladimir Polotski. 2014 « Production planning of a failure-prone manufacturing/remanufacturing system with production-dependent failure rates ». Applied Mathematics vol. 5 , nº 10. p. 1557-1572
Annie Francie Kouedeu, Jean-Pierre Kenné, Pierre Dejax, Victor Songmene, Vladimir Polotski. 2014 « Stochastic optimal control of manufacturing systems under production-dependent failure rates ». International Journal of Production Economics vol. 150. p. 174-187
Van Ngan Lê, Henri Champliaud. 2014 « Safety factor of welded-plate beams based on finite element linear buckling analysis ». Proceedings of the IASTED International Conference on Modelling, Simulation and Identification, MSI 2014 (Banff, AB, Canada, July 16-18, 2014) Acta Press
Fatemeh Masoumi, Mohammad Jahazi, J. Cormier, D. Shahriari. 2014 « Dissolution kinetics and morphological changes of γ′ in AD730TM superalloy ». 2nd European Symposium on Superalloys and Their Applications, EUROSUPERALLOYS 2014 (Giens, France, May 12-16, 2014)
S. Mojarad, H. Champliaud, J. Gholipour, J. Savoie, P. Wanjara. 2014 « Load path optimization in tube hydroforming ». Canadian Aeronautics and Space Journal = Journal Aéronautique et Spatial du Canada vol. 60 , nº 3. p. 82-89
A. Momeni, G. R. Ebrahimi, Mohammad Jahazi, Philippe Bocher. 2014 « Microstructure evolution at the onset of discontinuous dynamic recrystallization: a physics-based model of subgrain critical size ». Journal of Alloys and Compounds vol. 587. p. 199-210
S. A. Niknam, Victor Songmene. 2014 « Analysis of friction and burr formation in slot milling ». 47th CIRP Conference on Manufacturing Systems, CMS 2014 (Windsor, Canada, Apr. 28-30, 2014) Elsevier
S. A. Niknam, Victor Songmene. 2014 « Analytical modelling of slot milling exit burr size ». International Journal of Advanced Manufacturing Technology vol. 73 , nº 1-4. p. 421-432
Seyed A. Niknam, Walery Wygowski, Marek Balazinksi, Victor Songmene. 2014 « Milling burr formation and avoidance ». In Machinability of Advanced Materials. p. 57-93. John Wiley & Sons, Inc.
Seyed Ali Niknam, Raid Khettabi, Victor Songmene. 2014 « Machinability and machining of titanium alloys: a review ». In Machining of Titanium Alloys. p. 1-30. Springer-Verlag Berlin Heidelberg
Seyed Ali Niknam, Yasser Zedan, Victor Songmene. 2014 « Machining burrs formation & deburring of aluminium alloys ». In Light metal alloys applications. p. 99-122. InTech publication
Hassan Radvar-Esfahlan, S.-Antoine Tahan. 2014 « Robust generalized numerical inspection fixture for the metrology of compliant mechanical parts ». International Journal of Advanced Manufacturing Technology vol. 70 , nº 5-8. p. 1101-1112
A. Rosenbaum, A. Chamanfar, Mohammad Jahazi, A. Bonakdar. 2014 « Microstructure analysis of broached inconel-718 gas turbine disc fir-trees ». Proceedings of the ASME Turbo Expo (Dusseldorf, Germany, June 16-20, 2014) American Society of Mechanical Engineers (ASME)
M. Saboori, Henri Champliaud, J. Gholipour, A. Gakwaya, J. Savoie, P. Wanjara. 2014 « Evaluating the flow stress of aerospace alloys for tube hydroforming process by free expansion testing ». International Journal of Advanced Manufacturing Technology vol. 72 , nº 9-12. p. 1275-1286
Mohamed Nejib Saidi, Victor Songmene, Jules Kouam. 2014 « Design, fabrication and testing of a polishing tool adaptable to machine-tools ». Affiche présentée lors de la conférence : Journée des étudiants du REGAL (JER2014) (Sherbrooke, QC, Canada, Nov. 18, 2014)
Emad Salari, Mohammad Jahazi, Alireza Khodabandeh, Hadi Ghasemi-Nanesa. 2014 « Influence of tool geometry and rotational speed on mechanical properties and defect formation in friction stir lap welded 5456 aluminum alloy sheets ». Materials and Design vol. 58. p. 381-389
Sheida Sarafan, Priti Wanjara, Henri Champliaud, Denis Thibault, Louis Mathieu. 2014 « Evaluation of electron beam welded AISI 415 stainless steel ». ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014) American Society of Mechanical Engineers (ASME)
Victor Songmene. 2014 « Outillage - optimisation d'usinage ». Communication lors de la conférence : 1re édition de l'évènement Alliance Monde Polymères (Lévis, QC, Canada, 11-12 février 2014)
Victor Songmene, Riad Khettabi, Martin Viens, Jules Kouam, Stéphane Hallé, François Morency, Jacques Masounave, Abdelhakim Djebara. 2014 « Mesure, contrôle et caractérisation des nanoparticules : Procédure appliquée à l'usinage et au frottement mécanique ». Montréal, Québec, Canada : IRSST. 93 p.
H. Touazine, Mohammad Jahazi, Philippe Bocher. 2014 « Influence of hard turning on microstructure evolution in the subsurface layers of Inconel 718 ». ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014) American Society of Mechanical Engineers (ASME)
Hoang Quan Tran, Henri Champliaud, Zhengkun Feng, Thien-My Dao. 2014 « Dynamic FE analysis for reducing the flat areas of formed shapes obtained by roll bending process ». ASME 2013 International Mechanical Engineering Congress and Exposition : November 15-21, 2013, San Diego, California, USA. (San Diego, CA, USA, Nov. 15-21, 2013 ) ASME
Quan Hoang Tran, Henri Champliaud, Zhengkun Feng, Thien My Dao. 2014 « FE study for reducing forming forces and flat end areas of cylindrical shapes obtained by the roll-bending process ». Journal of Mechanics Engineering and Automation vol. 4 , nº 6. p. 467-475
Quan Hoang Tran, Henri Champliaud, Zhengkun Feng, Thien-My Dao. 2014 « Analysis of the asymmetrical roll bending process through dynamic FE simulations and experimental study ». International Journal of Advanced Manufacturing Technology vol. 75 , nº 5-8. p. 1233-1244

G. N. Abenhaim, A. Desrochers, Antoine S. Tahan. 2013 « An Investigation of the Repeatability of Nonrigid Parts Measurements: A Case Study of an Aluminum Panel ». 12th CIRP Conference on Computer Aided Tolerancing
Gad N. Abenhaim, S. Antoine Tahan, Alain Desrochers, Jean-Francois Lalonde. 2013 « Aerospace panels fixtureless inspection methods with restraining force requirements; A technology review ». SAE 2013 AeroTech Congress and Exhibition (AEROTECH) (Montreal, QC, Canada, Sept. 24-26, 2013) SAE International
Ali Aidibe, Antoine Tahan. 2013 « Curvature estimation for metrology of non-rigid parts ». ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference (MSEC) (Madison, WI, USA, June 10-14, 2013) American Society of Mechanical Engineers
Ali Aidibe, S. Antoine Tahan, Jean-Francois Lalonde. 2013 « A robust iterative displacement inspection algorithm for quality control of aerospace non-rigid parts without conformation jig ». SAE 2013 AeroTech Congress and Exhibition (AEROTECH) (Montreal, QC, Canada, Sept. 24-26, 2013) SAE International
Ali Aidibe, S.-Antoine Tahan. 2013 « An inspection approach for nonrigid mechanical parts ». Manufacturing Science and Technology (ICMST2013) (Dubai, United Arab Emirates, Aug. 3-4, 2013) Trans Tech Publications Ltd
Melissa Anderson, Javad Gholipour, Florent Bridier, Philippe Bocher, Mohammad Jahazi, Jean Savoie, Priti Wanjara. 2013 « Improving the formability of stainless steel 321 through multistep deformation for hydroforming applications ». Transactions of the Canadian Society for Mechanical Engineering vol. 37 , nº 1. p. 39-52
Mahyar Asadi, Dominic Guillot, Arnaud Weck, Ashok K. Koul, Ahmad Chamanfar, Mohammad Jahazi. 2013 « Constructing a validated deformation mechanism map using low temperature creep strain accommodation processes for waspaloy (A nickel-based superalloy) ». American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Paris, France, July 14-18, 2013) American Society of Mechanical Engineers
M. Bensalah, A. Chamanfar, S. Chentouf, M. Jahazi. 2013 « The influence of thermomechanical processing on prior austenite grain size in medium carbon low alloy steels ». Materials Science & Technology Conference and Exhibition 2013 (MS&T'13) (Montreal, QC, Canada, Oct. 27-31, 2013) Curran
N. Boutana, P. Bocher, M. Jahazi. 2013 « Discrepancy between fatigue and dwell-fatigue behavior of near alpha titanium alloys simulated by cellular automata ». International Journal of Fatigue vol. 51. p. 49-56
A. Chamanfar, L. Sarrat, M. Jahazi, M. Asadi, A. Weck, A. K. Koul. 2013 « Microstructural characteristics of forged and heat treated Inconel-718 disks ». Materials and Design vol. 52. p. 791-800
Ahmad Chamanfar, Mohammad Jahazi, Javad Gholipour, Priti Wanjara, Stephen Yue. 2013 « Modeling grain size and strain rate in linear friction welded Waspaloy ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 44 , nº 9. p. 4230-4238
Guillaume Corriveau, Raynald Guilbault, Antoine Tahan, Robert Sabourin. 2013 « Review of phenotypic diversity formulations for diagnostic tool ». Applied Soft Computing vol. 13 , nº 1. p. 9-26
B. Danouj, S.-Antoine Tahan, Éric David. 2013 « Using a new generation of piezoelectric sensors for partial discharge detection ». Measurement: Journal of the International Measurement Confederation vol. 46 , nº 1. p. 660-666
A. Djebara, A. Bahloul, V. Songmene. 2013 « Émission et dispersion de particules lors de l'usinage à sec d'alliages d'aluminium ». Proceedings of the 12th International Aluminum Conference (INALCO) (Montréal, QC, Canada, Oct. 21-23, 2013)
A. Djebara, W. Jomaa, A. Bahloul, V. Songmene. 2013 « Dust emission during dry machining of aeronautic aluminum alloys ». Proceedings of 1st International Conference on Aeronautics Sciences (ICAS) (Oran, Algeria, May 27-28, 2013) ICAS
A. Djebara, Victor Songmene. 2013 « Dry machining of aluminum alloys and air quality ». Proceedings of the 37th International MATADOR Conference (Manchester, UK, July 25-27, 2012) Springer Science and Business Media, LLC
A. Djebara, Y. Zedan, Jules Kouam, Victor Songmene. 2013 « The effect of the heat treatment on the dust emission during machining of an Al-7Si-Mg cast alloys ». Journal of Materials Engineering and Performance vol. 22 , nº 12. p. 3840-3853
Abdelhakim Djebara, Victor Songmene, Ali Bahloul. 2013 « Effects of machining conditions on specific surface of PM2.5 emitted during metal cutting ». Health vol. 5 , nº 10A2. p. 36-43
Zhengkun Feng, Henri Champliaud. 2013 « FEM analysis of mecano-welding process for manufacturing cylinders ». Sheet Metal 2013 (Belfast, Ireland, Mar. 25-27, 2013) Trans Tech Publications Ltd
Zhengkun Feng, Henri Champliaud. 2013 « Modeling and simulation of hot radial-axial ring rolling process for producing power plant parts ». Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 (Montreal, QC, Canada, Oct. 27-31, 2013) Association for Iron and Steel Technology
Zhengkun Feng, Henri Champliaud. 2013 « Modelling and simulation of radial ring rolling process based on finite element analyses ». American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Paris, France, July 14-18, 2013) American Society of Mechanical Engineers
Zhengkun Feng, Henri Champliaud, Louis Mathieu, Michel Sabourin. 2013 « Modeling and simulation of optimal blank design and hot pressing process for manufacturing large francis turbines blades from very thick plates ». American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Paris, France, July 14-18, 2013) American Society of Mechanical Engineers
Zhengkun Feng, Henri Champliaud, Louis Mathieu, Michel Sabourin, Van Ngan Lê. 2013 « Investigation of pressing process for large and thick blades of Francis turbines ». Congrès français de mécanique 2013 : du 26 au 30 août 2013 Bordeaux (Bordeaux, France, Aug. 26-30, 2013) Association Française de Mécanique
Zhengkun Feng, Henri Champliaud, Michel Sabourin, Sebastien Morin. 2013 « Optimal blank design based on finite element method for blades of large Francis turbines ». Simulation Modelling Practice and Theory vol. 36. p. 11-21
M. Gagnon, Antoine Tahan, Philippe Bocher, D. Thibault. 2013 « On the fatigue reliability of hydroelectric Francis runners ». 5th International Conference on Fatigue Design, Fatigue Design 2013 (Senlis, France, Nov. 27-28, 2013)
Martin Gagnon, Antoine Tahan, Philippe Bocher, Denis Thibault. 2013 « A probabilistic model for the onset of High Cycle Fatigue (HCF) crack propagation: Application to hydroelectric turbine runner ». International Journal of Fatigue vol. 47. p. 300-307
Mathieu Gendron, Eric Boudreault, Bruce Hazel, Henri Champliaud, Tan Pham. 2013 « Temperature profile optimization in a new robotic local induction heat treatment process ». Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 (Montreal, QC, Canada, Oct. 27-31, 2013) Association for Iron and Steel Technology
F. Jalilian, M. Jahazi, R. A. L. Drew. 2013 « Microstructure evolution during transient liquid phase bonding of alloy 617 ». Metallography, Microstructure, and Analysis vol. 2 , nº 3. p. 170-182
W. Jomaa, Victor Songmene, Philippe Bocher. 2013 « On residual stress changes after orthogonal machining of induction hardened AISI 4340 steel ». Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 (Montreal, QC, Canada, Oct. 27-31, 2013) Association for Iron and Steel Technology
Rene Kamguem, Souheil Antoine Tahan, Victor Songmene. 2013 « Evaluation of machined part surface roughness using image texture gradient factor ». International Journal of Precision Engineering and Manufacturing vol. 14 , nº 2. p. 183-190
R. Kamguem, A. Djebara, Victor Songmene. 2013 « Investigation on surface finish and metallic particle emission during machining of aluminum alloys using response surface methodology and desirability functions ». International Journal of Advanced Manufacturing Technology vol. 69 , nº 5-8. p. 1283-1298
Rabih Kassab, Henri Champliaud, Philippe Bocher, Jacques Lanteigne, Van Ngan Lê. 2013 « Strain variations of AISI 4340 steel undergoing metallurgical transformations during induction hardening heat treatment ». Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 (Montreal, QC, Canada, Oct. 27-31, 2013) Association for Iron and Steel Technology
Mourad Kedadouche, Thameur Kidar, Marc Thomas, Antoine Tahan, Mohamed El Badaoui, Raynald Guilbault. 2013 « Combining EMD and Lempel-Ziv complexity for early detection of gear cracks ». Surveillance 7 : international conference : October 29-30, 2013, Chartres, France (Chartres, France, Oct. 29-30, 2013) Institute of Technology
Mourad Kedadouche, Marc Thomas, Antoine Tahan. 2013 « Cyclostationarity applied to acoustic emission and development of a new indicator for monitoring bearing defects ». CIRI 2013, 3ème Congrès International sur l’Ingénierie des Risques Industriels (Reims, France, July 3-5, 2013) Université de Reims Champagne-Ardenne
R. Khettabi, L. Fatmi, Jacques Masounave, Victor Songmene. 2013 « On the micro and nanoparticle emission during machining of titanium and aluminum alloys ». CIRP Journal of Manufacturing Science and Technology vol. 6 , nº 3. p. 175-180
Jules Kouam, Victor Songmene, Ali Bahloul. 2013 « Experimental investigation on PM2.5 particle emission during polishing of granite ». Health vol. 5 , nº 10A2. p. 29-35
Jules Kouam, Victor Songmene, Yasser Zedan, AbdelHakim Djebara, Riad Khettabi. 2013 « On chip formation during drilling of cast aluminum alloys ». Machining Science and Technology vol. 17 , nº 2. p. 228-245
Annie Francie Kouedeu, Jean-Pierre Kenné, Pierre Dejax, Victor Songmene, Vladimir Polotski. 2013 « Analytical modelling and control of a hybrid manufacturing/remanufacturing system ».
Annie Levasseur, Jérémie Ménard, Victor Songmene, Julio Fernandes, Yvan Petit. 2013 « Quality of reamed surface using serrated blades as compared to a convential acetabular reamer ». ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (San Diego, CA, USA, Nov. 15-21, 2013) American Society of Mechanical Engineers (ASME)
Van Ngan Lê, Henri Champliaud. 2013 « Safety factor of beam-column structures based on finite element linear buckling analysis ». Congrès français de mécanique 2013 : du 26 au 30 août 2013 Bordeaux (Bordeaux, France, Aug. 26-30, 2013) Association Française de Mécanique
A. R. Maldar, G. R. Ebrahimi, Meysam Haghshenas, M. Jahazi, P. Bocher. 2013 « Thermomechanical characterization of Mg-9Al-1Zn alloy using power dissipation maps ». Journal of Materials Engineering and Performance vol. 22 , nº 11. p. 3306-3314
S. Mojarad Farimani, Henri Champliaud, J. Gholipour, J. Savoie, P. Wanjara. 2013 « Numerical and experimental study of tube hydroforming for aerospace applications ». The Current State-of-the-Art on Material Forming: Numerical and Experimental Approaches at Different Length-Scales (Aveiro, Portugal, Apr. 22-24, 2013) Trans Tech Publications Ltd
Sylvie Nadeau, Michèle Bouchard, Maximilien Debia, Nathalie DeMarcellis-Warin, Stéphane Hallé, Victor Songmene, Marie-Christine Therrien, Kevin Wilkinson, Barthelemy Ateme-Nguema, Genevieve Dufour, André Dufresne, Julien Fatisson, Sami Haddad, Madjid Hadioui, Jules Kouam, François Morency, Robert Tardif, Martin Viens, Scott Weichenthal, Claude Viau, Michel Camus. 2013 « EquiNanos: innovative team for nanoparticle risk management ». Nanomedicine : Nanotechnology, Biology and Medicine vol. 9 , nº 1. p. 22-24
S. A. Niknam, V. Songmene. 2013 « Deburring and edge finishing of aluminum alloys : a review ». Proceedings of the 12th International Aluminum conference (INALCO) (Montréal, QC, Canada, Oct. 21-23, 2013)
S. A. Niknam, Victor Songmene. 2013 « Modeling of burr thickness in milling of ductile materials ». International Journal of Advanced Manufacturing Technology vol. 66 , nº 9-12. p. 2029-2039
S. A. Niknam, Victor Songmene, Y. H. J. Au. 2013 « The use of acoustic emission information to distinguish between dry and lubricated rolling element bearings in low-speed rotating machines ». International Journal of Advanced Manufacturing Technology vol. 69 , nº 9-12. p. 2679-2689
Seyed Ali Niknam, Victor Songmene. 2013 « Experimental investigation and modeling of milling burrs ». ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference (MSEC) (Madison, WI, USA, June 10-14, 2013) American Society of Mechanical Engineers
Seyed Ali Niknam, Victor Songmene. 2013 « Factors governing burr formation during high-speed slot milling of wrought aluminum alloys ». Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture vol. 227 , nº 8. p. 1165-1179
Seyed Ali Niknam, Victor Songmene. 2013 « Simultaneous optimization of burrs size and surface finish when milling 6061-T6 aluminium alloy ». International Journal of Precision Engineering and Manufacturing vol. 14 , nº 8. p. 1311-1320
Seyed Ali Niknam, Victor Songmene, Y. H. Joe Au. 2013 « Proposing a new acoustic emission parameter for bearing condition monitoring in rotating machines ». Transactions of the Canadian Society for Mechanical Engineering vol. 37 , nº 4. p. 1105-1114
Yvan Petit, Julio Fernandes, Jean-Sébastien Mérette, Mathieu Dansereau, Victor Songmene, Mathieu Carrier. 2013-06-04 « Acetabular reamer ». Brevet américain US 8,454,609.
H. Radvar-Esfahlan, S.-Antoine Tahan. 2013 « Performance study of dimensionality reduction methods for metrology of nonrigid mechanical parts ». International Journal of Metrology and Quality Engineering vol. 4 , nº 3. p. 193-200
M. Saboori, J. Gholipour, Henri Champliaud, A. Gakwaya, J. Savoie, P. Wanjara. 2013 « Development of an inverse method for material characterization ». Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 (Montreal, QC, Canada, Oct. 27-31, 2013) Association for Iron and Steel Technology
M. Saboori, J. Gholipour, Henri Champliaud, A. Gakwaya, J. Savoie, P. Wanjara. 2013 « Effect of material model on finite element modeling of aerospace alloys ». The Current State-of-the-Art on Material Forming: Numerical and Experimental Approaches at Different Length-Scales (Aveiro, Portugal, Apr. 22-24, 2013) Trans Tech Publications Ltd
V. Sabri, S.-Antoine Tahan, X. T. Pham, H. Radvar-Esfahlan, B. Louhichi, A. M. Tahvilian. 2013 « Fixtureless profile inspection of non-rigid parts ». Proceedings of International Conference on Computers and Industrial Engineering, CIE (Hong Kong, China, Oct. 16-18, 2013) Curran Associates Inc.
S. Sarafan, P. Wanjara, Henri Champliaud, L. Mathieu, J. Lanteigne. 2013 « Characteristics of electron beam welded CA6NM ». Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 (Montreal, QC, Canada, Oct. 27-31, 2013) Association for Iron and Steel Technology
Stephane Segonds, Jacques Masounave, Victor Songmene, Christian Bes. 2013 « A simple analytical model for burr type prediction in drilling of ductile materials ». Journal of Materials Processing Technology vol. 213 , nº 6. p. 971-977
D. Shahriari, A. Zolfaghari, Mohammad Jahazi, Philippe Bocher. 2013 « Development of an expert system to characterize weld defects identified by ultrasonic testing ». American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Paris, France, July 14-18, 2013) American Society of Mechanical Engineers
Victor Songmene, R. D. Njoya, B. T. Nkengue. 2013 « Machining performance of a graphitic SiC-aluminium matrix composite ». Proceedings of the 37th International MATADOR Conference (Manchester, UK, July 25-27, 2012) Springer Science and Business Media, LLC
A. M. Tahvilian, Henri Champliaud, Zhaoheng Liu, B. Hazel. 2013 « Study of workpiece temperature distribution in the contact zone during robotic grinding process using finite element analysis ». 8th CIRP Conference on Intelligent Computation in Manufacturing Engineering, ICME 2012 (Ischia, Italy, July 18-20, 2012) Elsevier
Amir Masoud Tahvilian, Henri Champliaud, Zhaoheng Liu, Bruce Hazel. 2013 « Influence of grit shape and cutting edge of material removal mechanism of a single abrasive in flexible robotic grinding ». ASME 2013 International Mechanical Engineering Congress and Exposition : November 15-21, 2013, San Diego, California, USA (San Diego, CA, USA, Nov. 15-21, 2013 ) ASME
Amir Masoud Tahvilian, Zhaoheng Liu, Henri Champliaud, Bruce Hazel. 2013 « Experimental and finite element analysis of temperature and energy partition to the workpiece while grinding with a flexible robot ». Journal of Materials Processing Technology vol. 213 , nº 12. p. 2292-2303
M. Tahvilian, Henri Champliaud, Zhaoheng Liu, B. Hazel. 2013 « Chop formation analysis of single grit cutting action in robotic grinding processes ». 52nd Annual Conference of Metallurgists (COM 2013) (Montreal, QC, Canada, Oct. 27-31, 2013) CIM The Candian Institute of Mining
Dominique Thuot, Zhaoheng Liu, Henri Champliaud, Julien Beaudry, Pierre-Luc Richard, Michel Blain. 2013 « Remote robotic underwater grinding system and modeling for rectification of hydroelectric structures ». Robotics and Computer-Integrated Manufacturing vol. 29 , nº 1. p. 86-95
Quan H. Tran, Henri Champliaud, Zhengkun Feng, Jamel Salem, Thien-My Dao. 2013 « Heat-assisted roll-bending process dynamic simulation ». International Journal of Modelling and Simulation vol. 33 , nº 1. p. 54-62
Imed Zaghbani, Victor Songmene, Ilian Bonev. 2013 « An experimental study on the vibration response of a robotic machining system ». Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture vol. 227 , nº 6. p. 866-880
Y. Zedan, Victor Songmene, R. Khettabi, J. Kouam, Jacques Masounave. 2013 « Surface integrity of Al6061-T6 drilled in wet, semi-wet and dry conditions ». Proceedings of the 37th International MATADOR Conference (Manchester, UK, July 25-27, 2012) Springer Science and Business Media, LLC
Yasser Zedan, Victor Songmene, Jules Kouam, Jacques Masounave. 2013 « Effects of lubrication modes on part quality during drilling 6061-T6 aluminium alloy ». International Journal of Machining and Machinability of Materials vol. 13 , nº 2-3. p. 231-252

Gad Noriel Abenhaim, Alain Desrochers, Antoine Tahan. 2012 « Nonrigid parts' specification and inspection methods: notions, challenges, and recent advancements ». International Journal of Advanced Manufacturing Technology vol. 63 , nº 5-8. p. 741-752
Ali Aidibe, Antoine S. Tahan, Gad N. Abenhaim. 2012 « Distinguishing profile deviations from a part's deformation using the maximum normed residual test ». WSEAS Transactions on Applied and Theoretical Mechanics vol. 7 , nº 1. p. 18-28
Melissa Anderson, Philippe Bocher, Javad Gholipour, Mohammad Jahazi, Jean Savoie, Priti Wanjara. 2012 « Increasing the hydroformability of stainless steel 321 by multistep processing ». Proceedings of the 14th International Conference on Metal Forming, METAL FORMING 2012 (Krakow, Poland, Sept. 16-19, 2012) Wiley-VCH Verlag
J. Arpin-Pont, M. Gagnon, Antoine Tahan, A. Coutu, D. Thibault. 2012 « Strain gauge measurement uncertainties on hydraulic turbine runner blade ». 26th IAHR Symposium on Hydraulic Machinery and Systems (Beijing, China, Aug. 19-23, 2012) IOP Publishing Ltd.
M. Balazinski, V. Songmene, H. A. Kishawy. 2012 « Analyzing the machinability of metal matrix composites ». In Machining Technology for Composite Materials. p. 394-411. Woodhead Publishing
A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, S. Yue. 2012 « Maximizing the integrity of linear friction welded Waspaloy ». Materials Science and Engineering: A vol. 555. p. 117-130
A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, S. Yue. 2012 « Suppressed liquation and microcracking in linear friction welded WASPALOY ». Materials and Design vol. 36. p. 113-122
H. Champliaud, Van Ngan Lê. 2012 « Beginning learning principles of finite element method with heat conduction ». Proceedings of the 5th World Universities Forum : Reinventing the university in a time of crisis (Rhodes Island, Greece, Jan. 8-10, 2012) Common Ground Publishing
Jean-François Chatelain, Jean-François Lalonde, Antoine S. Tahan. 2012 « Effect of Residual Stresses Embedded within Workpieces on the Distortion of Parts after Machining ». International Journal of Mechanics vol. 6 , nº 1. p. 43-51
Guillaume Corriveau, Raynald Guilbault, Antoine Tahan, Robert Sabourin. 2012 « Review and study of genotypic diversity measures for real-coded representations ». IEEE Transactions on Evolutionary Computation vol. 16 , nº 5. p. 695-710
A. Djebara, V. Songmene, J. Kouam, R. Khettabi. 2012 « An experimental investigation on dust emission during milling process using statistical analysis ». International Journal of Advances in Machining and Forming Operations vol. 4 , nº 1. p. 15-37
Zhengkun Feng, Henri Champliaud. 2012 « Investigation of non-kinematic conical roll bending process with conical rolls ». Simulation Modelling Practice and Theory vol. 27. p. 65-75
Zhengkun Feng, Henri Champliaud. 2012 « Modeling and simulation of mecano-welding process for cylinders ». Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (Chicago, IL, USA, Aug. 12-15, 2012) ASME
Zhengkun Feng, Henri Champliaud. 2012 « Numerical simulation of mecano-welding process for cylinder manufacturing ». ASME 2012 Pressure Vessels and Piping Conference, PVP 2012 (Toronto, ON, Canada, July 15-19, 2012) American Society of Mechanical Engineers
Zhengkun Feng, Henri Champliaud, Michel Sabourin, Sébastien Morin. 2012 « Modeling and simulation based on inverse finite element method for unfolding large and thick blades of Francis turbines ». 24th European Modeling and Simulation Symposium, EMSS 2012 (Vienna, Austria, Sept.19-21, 2012) DIPTEM
Zhengkun Feng, Henri Champliaud, Michel Sabourin, Sebastien Morin. 2012 « Simulation of blank design for blades of francis turbines ». ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012 (Houston, TX, USA, Nov. 9-15, 2012) American Society of Mechanical Engineers
M. Gagnon, Antoine Tahan, Philippe Bocher, D. Thibault. 2012 « The role of high cycle fatigue (HCF) onset in Francis runner reliability ». 26th IAHR Symposium on Hydraulic Machinery and Systems (Beijing, China, Aug. 19-23, 2012) IOP Publishing Ltd.
Martin Gagnon, Antoine Tahan, Philippe Bocher, Denis Thibault. 2012 « On the stochastic simulation of hydroelectric turbine blades transient response ». Mechanical Systems and Signal Processing vol. 32. p. 178-187
W. Jomaa, N. Ben Fredj, Victor Songemene, I. Zaghbani, C. Braham. 2012 « Hybrid machining versus hard turning-investigation on process induced residual stresses ». 1st International Conference on Virtual Machining Process Technology (VMPT) (Montréal, Québec, May 28-June 01, 2012)
R. Kamguem, B. Wenga, Antoine Tahan, V. Songmene. 2012 « Non-contact optical inspection of machined parts surface roughness ». Communication lors de la conférence : International Conference on Virtual Machining Process Technology (VMPT) (Montreal, QC, Canada, May 28-June 1, 2012)
René Kamguem, Victor Songmene, Jean-Pierre Kenné, Souheil Antoine Tahan. 2012 « Vision-based surface roughness inspection of machined aluminium parts ». International Journal of Machining and Machinability of Materials vol. 12 , nº 3. p. 215-235
René Kamguem, Antoine Tahan, Bernard Wenga, Victor Songmene. 2012 « Non-contact Optical inspection of machined parts Surface Roughness ». 1st International Conference on Virtual Machining Process Technology (VMPT) (Montréal, Québec, Canada, 28 mai au 1er juin 2012)
Rabih Kamal Kassab, Henri Champliaud, Van Ngan Lê, Jacques Lanteigne, Marc Thomas. 2012 « Experimental and finite element analysis of a t-joint welding ». Journal of Mechanics Engineering and Automation vol. 2 , nº 7. p. 411-421
M. Kedadouche, Marc Thomas, Antoine Tahan. 2012 « Monitoring bearings by acoustic emission: a comparative study with vibration techniques for early detection ». 30th Canadian Machinery Vibration Association (CMVA) (Niagara Falls, ON, Canada, Oct. 24-26, 2012) The Canadian Machinery Vibration Association
J. Kouam, V. Songmene, M. Balazinski, P. Hendrick. 2012 « Dry, semi-dry and wet machining of 6061-T6 aluminium alloy ». In Aluminium Alloys - New Trends in Fabrication and Applications. p. 199-222. InTech
J. Kouam, V. Songmene, A. Djebara, R. Khettabi. 2012 « Effect of friction testing of metals on particle emission ». Journal of Materials Engineering and Performance vol. 21 , nº 6. p. 965-972
Jules Kouam, Imed Zaghbani, Victor Songmene, Nick Parson, Alexandre Maltais. 2012 « Factors affecting the machinability of Al-Mg-Si extrusions ». Proceedings of the 10th International Aluminum Extrusion Technology Conference (ET '12) (Miami, FL, USA, May 15-18, 2012) Extrusion Technology for Aluminum Profiles Foundation
Annie Francie Kouedeu, Jean-Pierre Kenné, Pierre Dejax, Victor Songmene. 2012 « A stochastic model for controlling the deterioration of a two machines production system: Extensions to remanufacturing ». 25th European Conference on Operational Research (EURO 2012) (Vilnius, Lituanie, July 08-11, 2012)
Annie Francie Kouedeu, Jean-Pierre Kenné, Pierre Dejax, Victor Songmene. 2012 « The study of a deteriorating manufacturing system using simulation and response methodology ». 24th European Modeling and Simulation Symposium, EMSS 2012 (Vienna, Austria, Sept. 19-21, 2012) DIPTEM
Annie Francie Kouedeu, Jean-Pierre Kenné, Pierre Delax, Victor Songmene. 2012 « Production planning of a two-machine manufacturing system with production dependent failure rates ». International Conference on Information Systems, Logistics and Supply Chain (ILS) (Québec, QC, Canada, Aug. 26-29, 2012)
Van Ngan Lê, Henri Champliaud. 2012 « A teaching approach for enhancing structural design aspects in basic engineering courses ». Proceedings of the 5th World Universities Forum : Reinventing the university in a time of crisis (Rhodes Island, Greece, Jan. 8-10, 2012) Common Ground Publishing
Van Ngan Lê, Henri Champliaud. 2012 « Finite element simulations for comparing three manhole designs for horizontal mills ». Proceedings of the IASTED International Conference on Modelling and Simulation, MS 2012 (Banff, AB, Canada, July 3-5, 2012 ) Acta Press
Seyed Ali Niknam, Rene Kamguem, Victor Songmene. 2012 « Analysis and optimization of exit burr size and surface roughness in milling using desirability function ». ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012 (Houston, TX, USA, Nov. 9-15, 2012) American Society of Mechanical Engineers
Seyed Ali Niknam, Victor Songmene. 2012 « Statistical investigation on burrs thickness during milling of 6061-T6 aluminium alloy ». 1st International Conference on Virtual Machining Process Technology (Montréal, QC, Canada, 28 May-01 June, 2012)
Seyed Ali Niknam, Yasser Zedan, Victor Songmene. 2012 « Burr formation during milling of wrought aluminum alloys ». 20th Annual Conference of Mechanical Engineering (ISME) (Shiraz, Iran, May 15-17, 2012)
M. Poirier, Antoine Tahan, M. Gagnon, A. Coutu. 2012 « Extrapolation des signaux de chargement mesurés sur des aubes de turbine hydroélectrique de type Francis ». 30th Canadian Machinery Vibration Association (CMVA) (Niagara Falls, ON, Canada, Oct. 24-26, 2012) The Canadian Machinery Vibration Association
Hassan Radvar-Esfahlan, Souheil-Antoine Tahan. 2012 « Nonrigid geometric metrology using generalized numerical inspection fixtures ». Precision Engineering vol. 36 , nº 1. p. 1-9
M. Saboori, Henri Champliaud, J. Gholipour, A. Gakwaya, J. Savoie, P. Wanjara. 2012 « Study of true stress-strain curve after necking for application in ductile fracture criteria in tube hydroforming of aerospace material ». Material Forming ESAFORM 2012 (Erlangen, Germany, Mar. 14-16, 2012) Trans Tech Publications Ltd
L. Sarrat, A. Chamanfar, Mohammad Jahazi. 2012 « Microstructure evolution of Ni base superalloys during thermomechanical processing ». Communication lors de la conférence : Research and Innovation for Transport Systems of the Future (Paris, France, Nov. 12-15, 2012)
Davood Shahriari, Iman Heidari, Kitae Kim, Mohammad Jahazi. 2012 « Welding temperature distribution in low carbon steel sheets by FDM and FEM ». Proceedings of the 14th International Conference on Metal Forming, METAL FORMING 2012 (Krakow, Poland, Sept. 16-19, 2012) Wiley-VCH Verlag
V. Songmene, J. Kouam, I. Zaghbani, N. Parson, A. Maltais. 2012 « Global machinability of Al-Mg-Si extrusions ». In Aluminium Alloys - New Trends in Fabrication and Applications. p. 223-251. InTech
Victor Songmene, Riad Khettabi, Jules Kouam. 2012 « Dry high-speed machining: A cost effective and green process ». International Journal of Manufacturing Research vol. 7 , nº 3. p. 229-256
A. S. Tahan, J. Cauvier. 2012 « Capability estimation of geometrical tolerance with a material modifier by a Hasofer-Lind index ». Journal of Manufacturing Science and Engineering vol. 134 , nº 2
Antoine Tahan. 2012 « Conception et assemblage, un mariage de raison ! ». L’Atout , nº novembre. p. 16-18
Abbas Tamadon, Ali Shokuhfar, Hossein Yoozbashizadeh, Mohammad Jahazi. 2012 « The role of carbon nanotubes in synthesis of TaC nanoparticles by gas – solid reaction ». Advanced Processes in Materials vol. 6 , nº 3 (22). p. 1-7
Marc Thomas, Antoine Tahan, M. Kedadouche. 2012 « Comparison of acoustic emission and vibration measurements for early detection of bearing damages ». Research and Innovation for Transport Systems of the Future (RITF) (Paris, France, Nov. 15, 2012)
Hoang Quan Tran, Henri Champliaud, Zhengkun Feng, Thien-My Dao. 2012 « Analytical modeling and Fe simulation for analyzing applied forces during roll bending process ». ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (Chicago, IL, USA, Aug. 12-15, 2012) American Society of Mechanical Engineers
Hoang Quan Tran, Henri Champliaud, Zhengkun Feng, Thien-My Dao. 2012 « Dynamic analysis of a workpiece deformation in the roll bending process by FEM simulation ». 24th European Modeling and Simulation Symposium, EMSS 2012 (Vienna, Austria, Sept.19-21, 2012) DIPTEM
B. Wenga, A. Djebara, R. Kamguem, J. Kouam, V. Songmene. 2012 « Diluteur approprié pour la mesure des concentrations élevées en poussières fines et ultrafines au cours de l'usinage à sec ». Affiche présentée lors de la conférence : 17e Colloque international en évaluation environnementale (Montréal, QC, Canada, 12-15 juin 2012)
B. Wenga Ntcheping, R. Kamguem, J. Kouam, V. Songmene. 2012 « Numerical study and simulation in COMSOL multiphysics of the dilution process during Dust's sampling in dry machining ». COMSOL Conference 2012 (Boston, MA, USA, Oct. 03-05, 2012) COMSOL
Imed Zaghbani, Jean-Fraçois Chatelain, Victor Songmene, Sébastien Bérubé, Abdelatif Atarsia. 2012 « A comprehensive analysis of cutting forces during routing of multilayer carbon fiber-reinforced polymer laminates ». Journal of Composite Materials vol. 46 , nº 16. p. 1955-1971
Imed Zaghbani, Jean-François Chatelain, Sébastien Bérubé, Victor Songmene, Justin Lance. 2012 « Analysis and modelling of cutting forces during the trimming of unidirectional CFRP composite laminates ». International Journal of Machining and Machinability of Materials vol. 12 , nº 4. p. 337-357
Imed Zaghbani, Walid Jomaa, Victor Songmene, Louis-Philippe L. Boire, Hoang Lehuy. 2012 « Investigation on tool wear during dry and wet machining of hardened mould steels ». International Journal of Civil Engineering and Building Materials vol. 2 , nº 3. p. 124-131
S. Zamani, H. Razavizadeh, Mohammad Jahazi. 2012 « Microstructure and hardness control of a binary -TiAl alloy by heat treatment ». 2nd International Advances in Applied Physics and Material Science (Antalya, Turkey, Apr. 26-29, 2012) Applied Physics and Material Science (APMAS)
S. Zamani, H. Razavizadeh, Mohammad Jahazi. 2012 « The influence of heat-treatment cycles on pressure strength of a binary-TiAl alloy ». 2nd International Advances in Applied Physics and Material Science (Antalya, Turkey, Apr. 26-29, 2012) Applied Physics and Material Science (APMAS)
Y. Zedan, A. Djebara, Victor Songmene, S. A. Niknam. 2012 « Burr size minimization when drilling 6061-t6 aluminum alloy ». ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012 (Houston, TX, USA, Nov. 9-15, 2012) American Society of Mechanical Engineers
Yasser Zedan, Riad Khettabi, Imed Zaghbani, Jules Kouam, Jacques Masounave, Victor Songmene. 2012 « Experimental investigation of cutting fluid influence on drilled aluminum part quality ». International Journal of Civil Engineering and Building Materials vol. 2 , nº 2. p. 78-84

Gad N. Abenhaim, Antoine Tahan, Alain Desrochers, Roland Maranzana. 2011 « A novel approach for the inspection of flexible parts without the use of special fixtures ». Journal of Manufacturing Science and Engineering vol. 133 , nº 1
A. Aidibe, Antoine Tahan, G. N. Abenhaim. 2011 « Dimensioning control of non-rigid parts using the Iterative Displacement Inspection with the maximum normed residual test ». 2nd International Conference on Fluid Mechanics and Heat and Mass Transfer (FLUIDSHEAT'11), 2nd International Conference on Theoretical and Applied Mechanics (TAM'11), 4th WSEAS International Conference on UPT'11 (CUHT'11) (Corfu Island, Greece, July 15-17, 2011) World Scientific and Engineering Academy and Society
N. Beaulieu, Antoine Tahan. 2011 « Le portrait du lean manufacturing au Québec : sondage 2012 ». Communication lors de la conférence : Forum TI-PME 2011 (Montréal, QC, Canada, 20 avril 2011)
Nicolas B. Beaulieu, Antoine Tahan. 2011 « Lean manufacturing au Québec : portrait 2010 ». Montréal, Québec, Canada : Manufacturiers et Exportateurs au Québec. 45 p.
X. Cao, M. Jahazi. 2011 « Effect of tool rotational speed and probe length on lap joint quality of a friction stir welded magnesium alloy ». Materials and Design vol. 32 , nº 1. p. 1-11
A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, S. Yue. 2011 « Mechanical property and microstructure of linear friction welded WASPALOY ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 42 , nº 3. p. 729-744
Jean-François Chatelain, J. F. Lalonde, Antoine Tahan. 2011 « A comparison of the distortion of machined parts resulting from residual stresses within workpieces ». 4th International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS) (Barcelona, Spain, Sept. 15-17, 2011) World Scientific and Engineering Academy and Society
E. Dalgaard, P. Wanjara, G. Trigo, M. Jahazi, G. Comeau, J. J. Jonas. 2011 « Linear friction welding of Al-Cu Part 2 - interfacial characteristics ». Canadian Metallurgical Quarterly vol. 50 , nº 4. p. 360-370
A. Djebara, R. Khettabi, J. Kouam, Victor Songmene. 2011 « Characterization of fine and ultrafine particles produced during dry machnining of aluminum alloys ». Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 03-05, 2011) MetSoc
Abdelhakim Djebara, Riad Khettabi, Jules Kouam, Victor Songmene. 2011 « Comparison of the capability of peak function in describing real condensation particle counter profiles ». 2nd International Conference on Laser and Plasma Applications in Materials Science, (LAPAMS) (Algiers, Algeria, Nov. 27-30, 2010) Trans Tech Publications
Zhengkun Feng, Henri Champliaud. 2011 « Modeling and simulation of asymmetrical three-roll bending process ». Simulation Modelling Practice and Theory vol. 19 , nº 9. p. 1913-1917
Zhengkun Feng, Henri Champliaud. 2011 « Modeling and simulation of mecano-welding process for tubular sections ». ASME International Mechanical Engineering Congress & Exposition (IMECE) (Denver, CO, USA, Nov. 11-17, 2011) ASME
Zhengkun Feng, Henri Champliaud. 2011 « Three-stage process for improving roll bending quality ». Simulation Modelling Practice and Theory vol. 19 , nº 2. p. 887-898
A. W. Hulskamp, J. W. Van Wingerden, T. Barlas, Henri Champliaud, G. A. M. Van Kuik, Harald E. N. Bersee, M. Verhaegen. 2011 « Design of a scaled wind turbine with a smart rotor for dynamic load control experiments ». Wind Energy vol. 14 , nº 3. p. 339-354
W. Jomaa, N. Ben Fredj, I. Zaghbani, V. Songmene. 2011 « Non-conventional turning of hardened AISI D2 tool steel ». International Journal of Advances in Machining and Forming Operations vol. 3 , nº 2. p. 93-126
René Kamguem, Victor Songmene, Jean-Pierre Kenné, Antoine Tahan. 2011 « Surface quality of 7075-T6 aluminum alloy machined using high-speed milling process ». Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, Canada, Oct. 2-5, 2011) MetSoc
Riad Khettabi, Imed Zaghbani, Abdelhakim Djebara, Jules Kouam, Victor Songmene. 2011 « A new sustainability model for machining processes ». International Journal of Business Continuity and Risk Management vol. 2 , nº 3. p. 187-202
Riad Khettabi, Yasser Zedan, Jacques Masounave, Victor Songmene. 2011 « On particle emission during machining of titanium and aluminum alloys ». Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 03-05, 2011) MetSoc
Jules Kouam, Yasser Zedan, Abdelhakim Djebara, Jacques Masounave, Victor Songmene. 2011 « Machinability of A356 and A319 aluminum alloy ». Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 02-05, 2011) MetSoc
Annie Francie Kouedeu, Jean-Pierre Kenné, Victor Songmene. 2011 « Production, preventive and corrective maintenance planning in manufacturing systems under imperfect repairs ». 3rd International Workshop on Dependable Control of Discrete Systems (DCDS) (Saarbrucken, Germany, June 15-17, 2011) IEEE
Abdelmajid Lajmi, Henri Champliaud, Van Ngan Lê. 2011 « Computation of the maximum torque of a cap liner using a power-law friction and finite element analysis ». Packaging Technology and Science vol. 24 , nº 2. p. 103-121
M. Lamraoui, Marc Thomas, M. El Badaoui, I. Zaghbani, Victor Songmene. 2011 « New indicators based on cyclostationarity approach for machining monitoring ». International Conference Surveillance 6 (Compiègne, France, Oct. 25-26, 2011)
Mourad Lamraoui, Marc Thomas, Mohamed El Badaoui, Imed Zaghbani, Victor Songmene. 2011 « The angular kurtosis and power : new tools for machining monitoring ». DINAME : The 14th International Symposium on Dynamic Problems of Mechanics (Sao Paulo, Brazil, Mar. 13-18, 2011) ABCM
Van Ngan Lê, Henri Champliaud. 2011 « Finite element analysis of spring back strain energy of metal sheet coils ». A world of engineering simulation industrial needs, best practice, visions for the future ; NWC 2011, NAFEMS World Congress, 23-26 May, Boston, USA (Boston, MA, USA, May 23-26, 2011)
Seyed Ali Niknam, Azziz Tiabi, Imed Zaghbani, Rene Kamguem, Victor Songmene. 2011 « Milling burr size estimation using acoustic emission and cutting forces ». ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011 (Denver, CO, United states, Nov. 11-17, 2011) American Society of Mechanical Engineers
Yann Pasco, Olivier Robin, Pierre Bélanger, Alain Berry, Srivatsa Rajan. 2011 « Multi-input multi-output feedforward control of multi-harmonic gearbox vibrations using parallel adaptive notch filters in the principal component space ». Journal of Sound and Vibration vol. 330 , nº 22. p. 5230-5244
F. Pelletier, Christian Masson, Antoine Tahan. 2011 « Running advanced analytics using MATLAB and PI system ». Communication lors de la conférence : OSIsoft user conference (San Francisco, CA, USA, Mar. 28-30, 2011)
Hassan Radvar-Esfahlan, Antoine Tahan. 2011 « Distance preserving dimensionality reduction methods and their applications in geometric inspection of nonrigid parts ». 5th symposium on Advances in Science and Technology (Mashhad, Iran, May 12-17, 2011)
Mehdi Saboori, J. Gholipour, Henri Champliaud, A. Gakwaya, J. Savoie, P. Wanjara. 2011 « Prediction of burst pressure using a decoupled ductile fracture criterion for tube hydroforming of aerospace alloys ». 14th International Esaform Conference on Material Forming (Esaform) (Belfast, Ireland, Apr. 27-29, 2011) American Institute of Physics
Victor Songmene, R. Khettabi, I. Zaghbani, J. Kouam, A. Djebara. 2011 « Machining and Machinability of Aluminum Alloys ». In Aluminium Alloys, Theory and Applications. p. 377-400. InTech
Antoine Tahan. 2011 « Exploiter les études de capabilité ». Communication lors de la conférence : 3e Journée de Métrologie en Aérospatiale (Montréal, QC, Canada, 28 avril 2011)
Antoine Tahan. 2011 « La gestion de la qualité : histoire, présent et future ». Communication lors de la conférence : Colloque Annuel de l'Ordre des Ingénieurs du Québec (Montréal, QC, Canada, 12-13 mai 2011)
Antoine S. Tahan, Sylvain Levesque. 2011 « Exploiting the process capability in the statistical estimation of the tolerance of location ». Mechanics and Industry vol. 12 , nº 6. p. 503-512
Antoine Tahan, Denis Thibault, Luc Marcouiller, Martin Gagnon, Mickael Szczota. 2011 « Modeling operation history of hydroelectric turbines ». The HydroVision International Conference (Sacramento, CA, USA, July 19-22, 2011)
Quan Hoang Tran, Henri Champliaud, Zhengkun Feng, Thien-My Dao. 2011 « FE simulation of heat assisted roll bending process for manufacturing large and thick high strength steel axisymmetric parts ». IASTED International Conference on Modelling, Simulation, and Identification (MSI) (Pittsburgh, PA, USA, Nov. 7-9, 2011) ACTA Press
Jomaa Walid, Imed Zaghbani, Victor Songmene, Louis-Philippe L. Boire, Hoang LeHuy. 2011 « Dry and wet machinability of hardened mould steels ». Proceedings of the International Conference on Environmental Pollution and Remediation (Ottawa, ON, Canada, Aug. 17-19, 2011) ASET
I. Zaghbani, J.-F. Chatelain, V. Songmene, S. Bérubé, A. Atarsia. 2011 « Modeling of cutting forces for multilayered CFRP laminates ». 26th Annual Technical Conference of the American Society for Composites : 2nd Joint US-Canada Conference on Composites (Montreal, QC, Canada, Sept. 26-28, 2011) DEStech Publications
I. Zaghbani, M. Lamraoui, V. Songmene, M. Thomas, M. El Badaoui. 2011 « Robotic high speed machining of aluminum alloys ». High Speed Machining : The 4th International Conference on High Speed Machining (ICHSM’2010) (Guangzhou, Guangdong, China, Oct. 9-10, 2010) Trans Tech Publications
Yasser Zedan, Riad Khettabi, Victor Songmene, Jacques Masounave. 2011 « Effect of lubrication and application modes on drilled aluminum part quality ». Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 02-05, 2011) MetSoc

Béchir Badri, Marc Thomas, Sadok Sassi, Imed Zaghbani, Victor Songmene. 2010 « Étude du comportement des roulements dans les rotors tournant à haute vitesse ». Revue Internationale sur l'Ingénierie des Risques Industriels vol. 3 , nº 1
N. Bastajib, N. Boutana, P. Bocher, M. Jahazi. 2010 « Application of cellular automata method to simulate the hot deformation behavior of a dual phase titanium alloy ». Technische Mechanik vol. 30 , nº 1-3
P. Belanger, P. Cawley. 2010 « Feasibility of guided wave diffraction tomography within the born approximation ». 36th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE) (Kingston, RI, USA, July 26-31, 2009)
Antoine Bres, Bruno Monsarrat, Laurent Dubourg, Lionel Birglen, Claude Perron, Mohammad Jahazi, Luc Baron. 2010 « Simulation of friction stir welding using industrial robots ». Industrial Robot vol. 37 , nº 1. p. 36-50
Pierre Bélanger, Peter Cawley, Francesco Simonetti. 2010 « Guided wave diffraction tomography within the born approximation ». IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control vol. 57 , nº 6. p. 1405-1418
Xinjin Cao, Guillaume Debaecker, Mohammad Jahazi, Surendar Marya, Jonathan Cuddy, Anand Birur. 2010 « Effect of post-weld heat treatment on Nd: YAG laser welded Ti-6Al-4V alloy quality ». THERMEC 2009 Trans Tech Publications Ltd
Xinjin Cao, Mohammad Jahazi. 2010 « Friction stir welding of dissimilar AA 2024-T3 to AZ31B-H24 alloys ». THERMEC 2009 Supplement (Berlin, Germany, ) Trans Tech Publications Ltd
O. Charrette, Marc Thomas, Henri Champliaud. 2010 « Effet des contraintes résiduelles de soudage sur les paramètres modaux de plaques minces ». XVII ème Symposium Vibration, Chocs et Bruits (VCB) (Écully, France, 15-17 juin 2010)
Guillaume Corriveau, Raynald Guilbault, Antoine Tahan. 2010 « Genetic algorithms and finite element coupling for mechanical optimization ». Advances in Engineering Software vol. 41 , nº 3. p. 422-426
E. Dalgaard, F. Coghe, L. Rabet, M. Jahazi, P. Wanjara, J. J. Jonas. 2010 « Texture evolution in linear friction welded Ti-6Al-4V ». THERMEC 2009 Supplement (Berlin, Germany, Aug. 25-29, 2009) Trans Tech Publications
Abdelhakim Djebara, Riad Khettabi, Jules Kouam, Victor Songmene. 2010 « Experimental investigation on ultrafine particles emission during dry machining using statistical tools ». International Conference on Nanotechnology : Fundamentals and Applications (Ottawa, Ont., Canada, Aug. 4-6, 2010)
Abdelhakim Djebara, Riad Khettabi, Seyed Ali Niknam, Victor Songmene. 2010 « Ultrafine particles sampling during machining of aluminum alloys : application to the nanoparticles metrology ». Communication lors de la conférence : Journée des Étudiants du Centre de Recherche sur l'Aluminium (REGAL) (Laval, Québec, Canada, 26 oct. 2010)
L. Dubourg, P. Doran, S. Larose, M. A. Gharghouri, M. Jahazi. 2010 « Prediction and measurements of thermal residual stresses in AA2024-T3 friction stir welds as a function of welding parameters ». THERMEC 2009 Supplement (Berlin, Germany, Aug. 25-29, 2009) Trans Tech Publications Ltd
L. Dubourg, A. Merati, M. Jahazi. 2010 « Process optimisation and mechanical properties of friction stir lap welds of 7075-T6 stringers on 2024-T3 skin ». Materials and Design vol. 31 , nº 7. p. 3324-3330
Zhengkun Feng, Henri Champliaud. 2010 « Analyses of non-kinematic conical roll bending process with conical rolls ». ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC / CIE) (Montréal, Québec, Canada, Aug.15–18, 2010) American Society of Mechanical Engineers
Zhengkun Feng, Henri Champliaud. 2010 « Comparison between numerical simulation and experimentation of roll bending process with three asymmetrical cylindrical rolls ». ASME 2010 International Mechanical Engineering Congress and Exposition (IMECE) (Vancouver, Canada, Nov. 12-18, 2010)
Martin Gagnon, Antoine Tahan, Philippe Bocher, Denis Thibault. 2010 « Impact of startup scheme on Francis runner life expectancy ». 25th IAHR Symposium on Hydraulic Machinery and Systems (Timişoara, Romania, 20–24 Sept. 2010) Institute of Physics Publishing
F. Gemme, Y. Verreman, L. Dubourg, M. Jahazi. 2010 « Numerical analysis of the dwell phase in friction stir welding and comparison with experimental data ». Materials Science and Engineering: A vol. 527 , nº 16-17. p. 4152-4160
Claude Gosselin, Antoine Tahan, Michel Ruel, Mathieu Desnoyers. 2010 « Simplified approach for monitoring the performance of multivariable processes ». Proceedings of the 2nd International Congress of Automation in the Mining Industry (Santiago, Chile, Nov. 10-12, 2010)
A. W. Hulskamp, Henri Champliaud, J. W. Van Wingerden, T. Barlas, Harald E. N. Bersee, G. A. M. Van Kuik, M. Verhaegen. 2010 « Smart dynamic rotor control : part 1, design of a smart rotor ». 3rd Conference Torque 2010 : the science of making torque from wind (FORTH, Heraklion, Crete, Greece, June 28-30, 2010)
René Kamguem, Victor Songmene, Seyed Ali Niknam. 2010 « Assessing the influence of acoustic emission parameters on machining processing using statistical analysis ». Proceedings of the Canadian Society of Mechanical Engineering Forum (Victoria, B.C, Canada, June 7-9, 2010)
Rabih Kassab, Henri Champliaud, Jacques Lanteigne, Van Ngan Lê, Marc Thomas. 2010 « Finite element modeling of a welded T-joint ». Proceedings of the Canadian Society of Mechanical Engineering Forum (Victoria, B.C, Canada, June 7-9, 2010)
Riad Khettabi, Abdelhakim Djebara, Victor Songmene. 2010 « Characterization and control of micro and nanoparticles produced during dry cutting ». X th Safety, Health and Environment World Congress (São Paulo, Brazil, July, 25-28, 2010)
Riad Khettabi, Jacques Masounave, Victor Songmene. 2010 « Influence of machining processes on particles emissions ». 49th Annual Conference of Metallurgists (COM) (Vancouver, B.C., Canada, Oct. 3-6, 2010)
Riad Khettabi, Victor Songmene. 2010 « Caractérisation et mesure des particules ultrafines émises lors du frottement et des procédés d'usinage ». Communication lors de la conférence : Activité d'animation scientifique de la communauté nanotoxicologie du Réseau de recherche en santé et sécurité du travail du Québec (RRSSTQ) (Montréal, Canada, 18 mars 2010)
Riad Khettabi, Victor Songmene, Jacques Masounave. 2010 « Effects of speeds, materials, and tool rake angles on metallic particle emission during orthogonal cutting ». Journal of Materials Engineering and Performance vol. 19 , nº 6. p. 767-775
Riad Khettabi, Victor Songmene, Imed Zaghbani, Jacques Masounave. 2010 « Modeling of particle emission during dry orthogonal cutting ». Journal of Materials Engineering and Performance vol. 19 , nº 6. p. 776-789
Jules Kouam, Jacques Masounave, Victor Songmene, Alain Giraudeau. 2010 « Pre-holes effect on cutting forces and particle emission during dry drilling ». 49th Annual Conference of Metallurgists (COM) (Vancouver, B.C., Canada, Oct. 3-6, 2010)
Jules Kouam, Victor Songmene, Abdelhakim Djebara, Riad Khettabi. 2010 « Metallic particle emission during friction testing of metals ». International Conference on Nanotechnology : Fundamentals and Applications (Ottawa, Ont., Canada, Aug. 4-6, 2010)
Abdelmajid Lajmi, Henri Champliaud, Van Ngan Lê. 2010 « Pressure and temperature dependent static friction model for an elastomer cap liner based on experiments ». Fifth International Conference on Advances in Mechanical Engineering and Mechanics (Hammamet, Tunisia, Dec. 18-20, 2010)
S. Larose, L. Dubourg, C. Perron, M. Jahazi, P. Wanjara. 2010 « Limitation of distortion in friction stir welded (FSW) panels using needle peening ». THERMEC 2009 (Berlin, Germany, Aug. 25-29, 2009) Trans Tech Publications Ltd
Van Ngan Lê, Henri Champliaud. 2010 « Finite element simulation of forces in strips tying metal sheet coils ». 30th IASTED Conference on Modelling, Identification, and Control (AsiaMIC) (Phuket, Thailand, November 24-26, 2010) Acta Press
Van Ngan Lê, Henri Champliaud, Françoise Marchand, Patrick Terriault, Jean Arteau. 2010 « Effective learning of buckling of columns in engineering programs ». Communication lors de la conférence : XI International Conference on Engineering and Technology Education (INTERTECH) (Ilheus, Bahia, Brazil, Mar. 7-10, 2010)
Van Ngan Lê, Henri Champliaud, Françoise Marchand, Patrick Terriault, Jean Arteau. 2010 « Effective learning of buckling of columns in engineering programs ». Proceedings of international conference on engineering and technology education (Ilheus, Bahia, Brazil, Mar. 7-10, 2010)
Seyed Ali Niknam, Seyed Mehdi Rezaei, Victor Songmene. 2010 « A Review on bearing faults diagnosis using acoustic emission ». 6th National Conference on Maintenance (Tehran, Iran, June 8-9, 2010) Civilica
Seyed Ali Niknam, Seyed Mehdi Rezaei, Victor Songmene. 2010 « Sensitivity of acoustic emission to lubrication on bearing surfaces ». 6th National Conference on Maintenance (Tehran, Iran, June 8-9, 2010) Civilica
Seyed Ali Niknam, Victor Songmene, Y.H. Joe Au. 2010 « Bearing condition monitoring in low rotating speed machine using acoustic emission ». Proceedings of the Canadian Society of Mechanical Engineering Forum (Victoria, B.C, Canada, June 7-9, 2010)
Seyed Ali Niknam, René Kamguem, Victor Songmene, Jean-Pierre Kenné. 2010 « Machining factors influence on acoustic emission parameters ». International Journal of Advances in Machining and Forming Operations vol. 2 , nº 2. p. 91-114
Seyed Ali Niknam, Victor Songmene. 2010 « The influence of bearing operational conditions on acoustic emission parameters ». Proceedings of the Canadian Society of Mechanical Engineering Forum (Victoria, B.C, Canada, June 7-9, 2010)
Francis Pelletier, Christian Masson, Antoine Tahan, Martin Jetté. 2010 « Experiment using high-frequency data sampling ». Affiche présentée lors de la conférence : Windpower Conference and Exhibition (Dallas, TX, USA, May 23-26, 2010)
Francis Pelletier, Christian Masson, Antoine Tahan, Martin Jetté. 2010 « Modelling through high frequency data sampling and other advantages ». Communication lors de la conférence : European Wind Energy Conference and Exhibition (EWEC) (Warsaw, Poland, April 20-23, 2010)
Marc Potvin, Antoine Tahan. 2010 « Investigation metrology ». Communication lors de la conférence : 3D Imaging Conference and Exposition (Anaheim, Ca., USA, May 18-20, 2010)
Boris Rabussier, Jacek Litwin, Victor Songmene, Jacques Masounave. 2010 « Effect of temperature and stress on friction of metal matrix composite ». 49th Annual Conference of Metallurgists (COM) (Vancouver, BC, Canada, Oct. 3-6, 2010)
Hassan Radvar-Esfahlan, Antoine Tahan. 2010 « Nonrigid geometric inspection using intrinsic geometry ». Proceedings of the Canadian Society of Mechanical Engineering Forum (Victoria, B.C., Canada, June 7-9, 2010)
Mehdi Saboori, Henri Champliaud, J. Gholipour Baradari, A. Gakwaya, J. Savoie. 2010 « Analytical evaluation and finite element simulation of material characteristics in tube hydroforming of aerospace alloys ». Communication lors de la conférence : International Conference on Advances in Materials and Processing Technologies (Paris, France, Oct. 24-27, 2010)
Patrice Seers, P. Terrier, Antoine Tahan, Marc Thomas. 2010 « Case Study : hybrid vehicles : the Honda insight and Toyota Prius : transition towards the automobile of the future? ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. p. 83-109. Cambridge Scholars Publishing
Victor Songmene. 2010 « Automated deburring and part finishing : progress and realisations ». Communication lors de la conférence : CRIAQ : Réunions du comité de recherche (Montréal, Canada, 13 janv. 2010)
Antoine Tahan. 2010 « Le rapport de mesure, puis après? ». Communication lors de la conférence : 2ème Journée de la métrologie en aérospatiale (JMA) (Montréal, Québec, Canada, 11 mars 2010)
P. Vo, M. Jahazi, S. Yue. 2010 « FEM modelling of recrystallization behaviour for near-alpha Ti alloy IMI834 ». THERMEC 2009 Supplement (Berlin, Germany, Aug. 25-29, 2009) Trans Tech Publications
Imed Zaghbani, Victor Songmene, Guillaume Kientzy, Hoang LeHuy. 2010 « Evaluation of sustainability of mould steels based on machinability data ». International Journal of Machining and Machinability of Materials vol. 7 , nº 1-2. p. 58-81
Imed Zaghbani, Victor Songmene, D. Tousignant. 2010 « A method for selection of the cutting conditions during robotic machining through the vibration response ». Premier Colloque International Innovations en Mécaniques Passives et ACTives pour l’ Analyse et la Conception des Systèmes Mécaniques (IMPACT) = First International Conference Passives and Actives Mechanical Innovations in Analysis and Design of Mechanica (Djerba, Tunisie, 22-24 août 2010)

Béchir Badri, Marc Thomas, Sadok Sassi, Imed Zaghbani, Victor Songmene, A. A. Lakis, N. Mureithi. 2009 « Instabilité des fraiseuses opérant à haute vitesse, provoquée par l’intéraction des défauts de roulements avec les résonances ». Proceedings of the 27th Seminar on Machinery Vibration (Vancouver, BC, Canada, Oct. 28-30, 2009)
Béchir Badri, Marc Thomas, Sadok Sassi, Imed Zaghbani, Victor Songmene, A. A. Lakis, N. Mureithi. 2009 « Étude du comportement des roulements dans les rotors tournant à haute vitesse. ». 2nd International Conference on Industrial Risk Engineering = 2e Congrès International sur l'Ingénierie des Risques Industriels (CIRI) (Reims, France, 13-15 mai 2009)
B. Balout, Jacques Masounave, Victor Songmene. 2009 « Modeling of eutectic macrosegregation in centrifugal casting of thin walled ZA8 zinc alloy ». Journal of Materials Processing Technology vol. 209 , nº 18-19. p. 5955-5963
Bahaa Balout, Victor Songmene, Jacques Masounave. 2009 « Mise en forme par centrifugation d'un composite à matrice d'aluminium gradué : modélisation de la ségrégation des particules pendant le processus de solidification ». In Encyclopédie de la recherche sur l'aluminium au Québec. Les Presses de l'aluminium PRAL
P. Belanger, P. Cawley. 2009 « Feasibility of low-frequency straight-ray guided wave tomography ». Proceedings of the 35th Annual Review of Progress in Quantitative Nondestructive Evaluation (Chicago, IL, USA, July 22-25, 2008) AIP
Pierre Bélanger, Alain Berry, Yann Pasco, Olivier Robin, Yves St-Amant, Srivatsa Rajan. 2009 « Multi-harmonic active structural acoustic control of a helicopter main transmission noise using the principal component analysis ». Applied Acoustics vol. 70 , nº 1. p. 153-164
Pierre Bélanger, Peter Cawley. 2009 « Feasibility of low frequency straight-ray guided wave tomography ». NDT and E International vol. 42 , nº 2. p. 113-119
X. Cao, M. Jahazi. 2009 « Effect of welding speed on butt joint quality of Ti–6Al–4V alloy welded using a high-power Nd:YAG laser ». Optics and Lasers in Engineering vol. 47 , nº 11. p. 1231-1241
X. Cao, M. Jahazi. 2009 « Effect of welding speed on lap joint quality of AZ31 magnesium alloy ». Trends in Welding Research 2008: Proceedings of the 8th International Conference (Pine Mountain, GA, USA, June 1-6, 2008) ASM International
X. Cao, M. Jahazi. 2009 « Effect of welding speed on the quality of friction stir welded butt joints of a magnesium alloy ». Materials and Design vol. 30 , nº 6. p. 2033-2042
X. Cao, B. Rivaux, M. Jahazi, J. Cuddy, A. Birur. 2009 « Effect of pre- and post-weld heat treatment on metallurgical and tensile properties of Inconel 718 alloy butt joints welded using 4 kW Nd:YAG laser ». Journal of Materials Science vol. 44 , nº 17. p. 4557-4571
A. Chamanfar, M. Jahazi, S. Yue, J. Gholipour, P. Wanjara. 2009 « Linear friction welding behavior of Waspaloy ». Materials Science and Technology Conference and Exhibition 2009, MS and T'09 (Pittsburgh, PA, USA, Oct. 25-29, 2009) Association for Iron and Steel Technology
Henri Champliaud, Zhengkun Feng, Harald E. N. Bersee. 2009 « Three-point bending testing of sandwich beams and finite element comparison ». ASME International Mechanical Engineering Congress and Exposition (IMECE) (Lake Buena Vista, FL, USA, Nov. 13-19, 2009) American Society of Mechanical Engineers
J-F. Charron, J. Teuwen, Simon Joncas, Harald E. N. Bersee, Henri Champliaud. 2009 « Vacuum infused anionic polyamide-6 composites : a comparison study between different mould heating strategies ». 24th Annual Technical Conference of the American Society for Composites and 1st Joint Canadian-American Technical Conference on Composites (Newark, DE, USA, Sept. 15-17, 2009) DEStech Publications, Inc.
E. Coman, K. Ghosh, M. Jahazi, L. Dubourg. 2009 « A study of the deformation and residual stress in an aircraft fuselage panel welded by friction stir welding ». International Journal of Advanced Manufacturing System vol. 11 , nº 2. p. 75-84
E. Dalgaard, Mohammad Jahazi, Ali Merati, P. Wanjara. 2009 « Mechanical properties of linear friction welded Ti-6-4V alloy ». XIX International Symposium on Air Breathing Engines 2009 : (ISABE 2009) : Montreal, Canada, 7-11 September 2009 (Montreal, QC, Canada, Sept. 7-11, 2009) American Institute of Aeronautics and Astronautics
Abdelhakim Djebara, Victor Songmene. 2009 « Mesure et caractérisation des nanoparticules (Nps) métalliques émises lors de l'usinage ». Affiche présentée lors de la conférence : INNO 09 : La Semaine de l'Innovation (Montréal, Canada, 23-24 avril 2009)
L. Dubourg, J. Gholipour, M. Jahazi. 2009 « Friction stir welding of 2024-T3 aluminum tubes for hydroforming application ». Trends in Welding Research 2008: Proceedings of the 8th International Conference (Pine Mountain, GA, USA, June 1-6, 2008) ASM International
Zhengkun Feng, Henri Champliaud, Thien-My Dao. 2009 « Numerical study of non-kinematical conical bending with cylindrical rolls ». Simulation Modelling Practice and Theory vol. 17 , nº 10. p. 1710-1722
Zhengkun Feng, Henri Champliaud, Thien-My Dao. 2009 « Three-dimensional finite element analyses for pyramidal three-roll bending process ». ASME International Mechanical Engineering Congress and Exposition (IMECE) (Lake Buena Vista, FL, USA, Nov. 13-19, 2009) American Society of Mechanical Engineers
Zhengkun Feng, Henri Champliaud, Van Ngan Lê, Thien-My Dao. 2009 « Analysis of roll bending processes based on finite element simulation ». Proceedings of the NAFEMS World Congress (Crete, Greece, June 16-19, 2009)
Martin Gagnon, Antoine Tahan, André Coutu. 2009 « Uncertainty in operational modal analysis of hydraulic turbine components ». International Journal of Fluid Machinery and Systems vol. 2 , nº 4. p. 278-285
M. Haghshenas, A. Zarei-Hanzaki, M. Jahazi. 2009 « An investigation to the effect of deformation-heat treatment cycle on the eutectic morphology and mechanical properties of a Thixocast A356 alloy ». Materials Characterization vol. 60 , nº 8. p. 817-823
Stéphane Hallé, Jules Kouam, Victor Songmene, François Morency, Martin Viens, Yves Cloutier, Jacques Masounave, Riad Khettabi, Abdelhakim Djebara. 2009 « Procédure de mesure et de contrôle des nanoparticules manufacturés ». Communication lors de la conférence : Conférences Scientifiques, Sécurité des Travailleurs et Contrôle des Risques Industriels (Montréal, QC, Canada, 17 sept. 2009)
A. W. Hulskamp, Henri Champliaud, Harald E. N. Bersee. 2009 « Design and analysis of a scaled smart rotor blade for wind turbine load control ». ICCM-17 - 17th International Conference on Composite Materials (Edinburgh, UK, July 27-31, 2009) International Committee on Composite Materials
R. Khettabi, A. Djebara, V. Songméné, M. Viens, S. Hallé, F. Morency, Y. Cloutier, J. Kouam, J. Masounave. 2009 « Procedure of measuring and controlling manufactured nanoparticles ». Communication lors de la conférence : INNO 2009 : La semaine de l'innovation (Montréal, QC, Canada, 23-24 avr. 2009)
Riad Khettabi, Abdelhakim Djebara, Victor Songmene. 2009 « Nano and micro particles emission study during metal cutting ». Affiche présentée lors de la conférence : INNO 09 : La Semaine de l'Innovation (Montréal, Canada, 23-24 avril 2009)
Riad Khettabi, Abdelhakim Djebara, Victor Songmene, Martin Viens, Stéphane Hallé, François Morency, Yves Cloutier, Jules Kouam, Jacques Masounave. 2009 « Control and measuring of manufactured nanoparticle ». Affiche présentée lors de la conférence : INNO 09 : La Semaine de l'Innovation (Montréal, Canada, 23-24 avril 2009)
Riad Khettabi, Victor Songmene. 2009 « Particle emission during orthogonal and oblique cutting ». International Journal of Advances in Machining and Forming Operations vol. 1 , nº 1. p. 1-10
C. Liu, D. L. Chen, S. Bhole, X. Cao, M. Jahazi. 2009 « Polishing-assisted galvanic corrosion in the dissimilar friction stir welded joint of AZ31 magnesium alloy to 2024 aluminum alloy ». Materials Characterization vol. 60 , nº 5. p. 370-376
Van Ngan Lê, Henri Champliaud, F. Martin, B Amri. 2009 « Rotating bending stresses in shrink-fit assemblies using FEM ». Proceedings of the NAFEMS World Congress (Crete, Greece, June 16-19, 2009)
A. Merati, J. Deronja, L. Dubourg, M. Jahazi. 2009 « Friction stir processing technology for the repair of nickel-aluminum bronze ». Canadian Aeronautics and Space Institute Conference (AERO 2009) (Kanata, ON, Canada, May 5-7, 2009)
A. Merati, L. Dubourg, M. Jahazi. 2009 « Application of FSW technology for additive repair of damaged components ». RTO-MP-AVT-163 Specialists' Meeting on Additive Technology for Repair of Military Hardware (Bonn, Germany, Oct. 19-22, 2009) NATO Science and Technology Organization
Yann Pasco, Olivier Robin, Pierre Bélanger, Alain Berry. 2009 « MiMO feedforward control of multi-harmonics gearbox vibrations using parallel adaptive notch filters in the principle component space ». Active09 (Ottawa, ON, Canada, Aug. 20-22, 2009) Institute of Noise Control Engineering
Virgilio Quintana, Louis Rivest, Robert Pellerin, Antoine Tahan, Frédérick Venne. 2009 « From fully dimensioned 2D drawings to reduced dimensioning 3D model-based definition ». Proceedings of the International Conference on Product Lifecycle Management : Supporting the Extended Enterprise (Bath, United Kingdom, July 6-9, 2009) Inderscience Enterprise Ltd
François-Étienne Rhéaume, Henri Champliaud, Zhaoheng Liu. 2009 « Understanding and modelling the torsional stiffness of harmonic drives through finite-element method ». Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science vol. 223 , nº 2. p. 515-524
K. A. Sghir, M. El Badaoui, Marc Thomas, Imed Zaghbani, Victor Songmene, A. A. Lakis, N. Mureithi. 2009 « Identification aveugle paramétrique basée sur la cyclostationnarité à l’ordre deux de la fonction de transfert à partir des mesures vibratoires ». 2nd International Conference on Industrial Risk Engineering = 2e Congrès International sur l'Ingénierie des Risques Industriels (CIRI) (Reims, France, 13-15 mai 2009)
Victor Songmene. 2009 « Dry machining and its effects on machining costs and shop-floor air quality ». Communication lors de la conférence : Hiroshima Aerospace Seminar (Montreal, QC, Canada, Oct. 7, 2009)
Antoine Tahan. 2009 « La gestion des variations géométriques : le présent et l'avenir ». Communication lors de la conférence : 1ère Journée de la Métrologie en Aérospatiale (JMA) (Montréal, QC, Canada, 5 mars 2009)
Antoine Tahan, Sylvain Levesque. 2009 « Exploiting the process capability of position geometric tolerance according GD & T ASME Y14.5M ». International Conference on Computers and Industrial Engineering (CIE) (Troyes, France, July 6-9, 2009) Institute of Electrical and Electronics Engineers Computer Society
Antoine Tahan, Sylvain Levesque. 2009 « Exploiting the process capability of profile tolerance according GD&T ASME-Y14.5M ». International Conference on Computers and Industrial Engineering (CIE) (Troyes, France, July 6-9, 2009) Institute of Electrical and Electronics Engineers Computer Society
P. Wanjara, M. Jahazi. 2009 « Application of shear punch testing to study microstructure-property relationships in electron beam welded 17-4 PH stainless steel ». Canadian Metallurgical Quarterly vol. 48 , nº 3. p. 317-326
Imed Zaghbani, Victor Songmene. 2009 « A force-temperature model including a constitutive law for Dry High Speed Milling of aluminium alloys ». Journal of Materials Processing Technology vol. 209 , nº 5. p. 2532-2544
Imed Zaghbani, Victor Songmene. 2009 « Estimation of machine-tool dynamic parameters during machining operation through operational modal analysis ». International Journal of Machine Tools and Manufacture vol. 49 , nº 12-13. p. 947-957
Imed Zaghbani, Victor Songmene, Riad Khettabi. 2009 « Fine and ultrafine particle characterization and modeling in high-speed milling of 6061-T6 aluminum alloy ». Journal of Materials Engineering and Performance vol. 18 , nº 1. p. 38-48

G.N. Abenhaïm, Antoine Tahan, Roland Maranzana. 2008 « Nouveau algorithme pour l'inspection des coques flexibles par déplacement itératif ». 2e Sommet Québec-Aquitaine-Midi-Pyrénées sur l'Usinage Haute Performance : Colloque sur l'Usinage à Sec (Montréal, QC, Canada, 3-5 mars 2008)
N. Afrin, D. L. Chen, X. Cao, M. Jahazi. 2008 « Microstructure and tensile properties of friction stir welded AZ31B magnesium alloy ». Materials Science and Engineering: A vol. 472 , nº 1-2. p. 179-186
H. Al-Kazzaz, M. Medraj, X. Cao, M. Jahazi. 2008 « Nd:YAG laser welding of aerospace grade ZE41A magnesium alloy: modeling and experimental investigations ». Materials Chemistry and Physics vol. 109 , nº 1. p. 61-76
Haider Al-Kazzaz, Xinjin Cao, Mohammad Jahazi, Mamoun Medraj. 2008 « Reliability of laser welding process for ZE41A-T5 magnesium alloy sand castings ». Materials Transactions vol. 49 , nº 4. p. 774-781
B. Ateme-Nguema, Thien-My Dao, Victor Songmene. 2008 « New approach based on RSM and ants colony system for multi-objective Optimization problem: a case study ». 14th International Conference on Industry, Engineering, and Management Systems (IEMS) (Cocoa Beach, FL, USA, Mar. 10-12, 2008)
Bahaa Balout, Victor Songmene, Jacques Masounave. 2008 « Perçage à sec de l'aluminium et alliages métalliques ». 2e Sommet Québec-Aquitaine-Midi-Pyrénées sur l'Usinage Haute Performance : Colloque sur l'Usinage à Sec (Montréal, QC, Canada, 3-5 mars 2008)
P. Belanger, P. Cawley. 2008 « LAMB wave tomography to evaluate the maximum depth of corrosion patches ». 34th Annual Review of Progress in Quantitative Nondestructive Evaluation (Golden, CO, USA, July 22-27, 2007) AIP
N. Boutana, P. Bocher, M. Jahazi, D. Piot, F. Montheillet. 2008 « Microstructural modeling of cold creep/fatigue in near alpha titanium alloys using cellular automata method ». Transactions of the Canadian Society for Mechanical Engineering vol. 32 , nº 2. p. 195-213
N. Boutana, Philippe Bocher, M. Jahazi, D. Piot, F. Montheillet. 2008 « The microstructural modeling of room temperature creep in titanium alloys using cellular automata model ». International Journal of Microstructure and Materials Properties vol. 3 , nº 4-5. p. 642-653
X. Cao, M. Guo, M. Jahazi. 2008 « Continuous wave ND:YAG laser welding of Ti-6A1-4V titanium alloy ». 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) Canadian Institute of Mining Metallurgy & Petroleum
X. Cao, M. Jahazi. 2008 « Overview of friction stir and laser welding techniques for lightweight alloys ». Canadian Welding Association Journal. p. 19-30
X. Cao, M. Jahazi, N. Afrin, D. L. Chen. 2008 « Fatigue properties of friction stir welded AZ31B magnesium alloy ». 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) Canadian Institute of Mining Metallurgy & Petroleum
X. Cao, M. Jahazi, H. Al-Kazzaz, M. Medraj. 2008 « Modelling of work-hardening behaviour for laser welded magnesium alloy ». International Journal of Materials Research vol. 99 , nº 2. p. 216-221
X. Cao, M. Jahazi, J. Fournier, M. Alain. 2008 « Optimization of bead spacing during laser cladding of ZE41A-T5 magnesium alloy castings ». Journal of Materials Processing Technology vol. 205 , nº 1–3. p. 322-331
X. Cao, B. Rivaux, M. C. Jahazi, J. Cuddy, A. Birur. 2008 « Effect of joint gap on Inconel 718 alloy quality welded using 4 kW continuous wave ND:YAG laser ». 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) Canadian Institute of Mining Metallurgy & Petroleum
X. Cao, M. Xiao, M. Jahazi, J. Fournier, M. Alain. 2008 « Optimization of processing parameters during laser cladding of ZE41A-T5 magnesium alloy castings using Taguchi method ». Materials and Manufacturing Processes vol. 23 , nº 4. p. 413-418
L. Dubourg, R. Amargier, M. Jahazi. 2008 « Relationship between FSW parameters, hardness and tensile properties of 7075-T6 and 2098-T851 similar but welds ». 7th International Symposium on Friction Stir Welding : 20-22 May 2008, Japan (Awaji Island, Japan, May 20-22, 2008) TWI Ltd
L. Dubourg, A. Merati, M. Gallant, M. Jahazi. 2008 « Manufacturing of aircraft panels by friction stir lap welding of 7075-T6 stringers on 2024-T3 skin: process optimization and mechanical properties ». 7th International Symposium on Friction Stir Welding : 20-22 May 2008, Japan (Awaji Island, Japan, May 20-22, 2008) TWI Ltd
Zhengkun Feng, Henri Champliaud, Thien-My Dao. 2008 « Modeling and simulation of conical bending with cylindrical rolls ». ASME Pressure Vessels and Piping Conference (PVP) (San Antonio, TX, USA, Jul. 22-26, 2007) American Society of Mechanical Engineers
Zhengkun Feng, Henri Champliaud, Thien-My Dao. 2008 « Simulation analyses of a non-kinematical conical roll bending process with conical rolls ». 20th European Modeling and Simulation Symposium (EMSS) (Amantea, Italy, Sept. 17-19, 2008) Diptim-Univ Genoa
Zhengkun Feng, Henri Champliaud, Thien-My Dao. 2008 « Simulation of a three-stage process for forming a closed cone from a plate ». ASME Pressure Vessels and Piping Conference (PVP) (Chicago, IL, USA, Jul. 27-31, 2008) American Society of Mechanical Engineers
F. Gemme, Y. Verreman, L. Dubourg, M. Jahazi. 2008 « Friction stir welding of 7075 aluminium alloy : finite element modelling of the dwell phase ». 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) Canadian Institute of Mining Metallurgy & Petroleum
L. Germain, N. Gey, M. Humbert, P. Vo, M. Jahazi, Philippe Bocher. 2008 « Texture heterogeneities induced by subtransus processing of near alpha titanium alloys ». Acta Materialia vol. 56 , nº 16. p. 4298-4308
J. Gholipour, M. Jahazi. 2008 « Evaluation of lubricants in hydroforming of aerospace materials ». Plasticity 2008 (Kailua-Kona, HI, USA, Jan. 2-5, 2008)
R. Khettabi, Victor Songmene, Jacques Masounave, Imed Zaghbani. 2008 « Understanding the formation of nano and micro particles during metal cutting ». International Journal of Systems Signal Control and Engineering Applications vol. 1 , nº 3. p. 203-210
R. Khettabi, Imed Zaghbani, Victor Songmene, Jacques Masounave. 2008 « Identification et prédiction des fines poussières lors de l'usinage ». In Encyclopédie de la recherche sur l’aluminium au Québec. p. 56. Les Presses de l'aluminium PRAL
Riad Khettabi, Victor Songmene, Jacques Masounave. 2008 « Influence des angles de coupe sur l'émission de poussières ». 2e Sommet Québec-Aquitaine-Midi-Pyrénées sur l'Usinage Haute Performance : Colloque sur l'Usinage à Sec (Montréal, QC, Canada, 3-5 mars 2008)
G. Kientzy, Imed Zaghbani, Victor Songmene. 2008 « Usinabilité et aspects économiques de l'usinage à sec et de l'usinage lubrifié ». In Encyclopédie de la recherche sur l’aluminium au Québec . p. 54. Les Presses de l'aluminium PRAL
Louis Lacasse, Antoine Tahan, Zhaoheng Liu. 2008 « Robust method for the automatic characterization of a wooden board's geometrical state ». Quality Engineering vol. 20 , nº 2. p. 221-231
D. Lévesque, L. Dubourg, M. Lord, M. Jahazi, A. Blouin. 2008 « Residual stress measurement in friction stir welds using laser ultrasonics ». Review of Progress in Quantitative Nondestructive Evaluation: Proceedings of the 35th Annual Review of Progress in Quantitative Nondestructive Evaluation (Chicago, IL, USA, July 22-25, 2008) AIP Publishing
D. Lévesque, L. Dubourg, C. Mandache, P. Gougeon, X. Cao, M. C. Jahazi. 2008 « Assessment of friction stir welds with nondestructive methods ». 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) Canadian Institute of Mining Metallurgy & Petroleum
Catalin Mandache, Laurent Dubourg, Ali Merati, Mohammad Jahazi. 2008 « Pulsed eddy current testing of friction stir welds ». Materials Evaluation vol. 66 , nº 4. p. 382-387
Caroline Mary, Mohammad Jahazi. 2008 « Multi-scale analysis of IN-718 microstructure evolution during linear friction welding ». Advanced Engineering Materials vol. 10 , nº 6. p. 573-578
E. Mbou, Victor Songmene. 2008 « Amélioration de la qualité et de la productivité de fraisage par le contrôle des conditions de coupe ». In Encyclopédie de la recherche sur l’aluminium au Québec. p. 55. Les Presses de l'aluminium, PRAL
Steeve Montminy, Erick Dupuis, Henri Champliaud. 2008 « Mechanical design of a hopper robot for planetary exploration using SMA as a unique source of power ». Acta Astronautica vol. 62 , nº 6-7. p. 438-452
H. N. Nguyen, Van Ngan Lê, Henri Champliaud, F. Martin. 2008 « Waving behaviour of fatigue stress fluctuation in shrink-fit assemblies using 3D finite elements ». 4th International Conference on High Performance Structures and Materials (HPSM) (Algarve, Portugal, May 13-15, 2008) WITPress
F. Pelletier, Christian Masson, Antoine Tahan. 2008 « Power performance evaluation and improvement of operational wind power plant ». OSIsoft Wind Power User Group Meeting (Chicago, IL, USA, June 4, 2008)
Victor Songmene, B. Balout, Jacques Masounave. 2008 « Clean machining : experimental investigation on dust formation : Part II : influence of machining strategies and drill condition ». International Journal of Environmentally Conscious Design & Manufacturing vol. 14 , nº 1. p. 17-33
Victor Songmene, B. Balout, Jacques Masounave. 2008 « Clean machining: experimental investigation on dust formation - Part I: influence of machining parameters and chip formation ». International Journal of Environmentally Conscious Design & Manufacturing vol. 14 , nº 1. p. 1-16
Victor Songmene, Jacques Masounave, R. Khettabi. 2008 « L'émission de poussières pendant l'usinage à sec : une synthèse ». 2e Sommet Québec-Aquitaine-Midi-Pyrénées sur l'Usinage Haute Performance : Colloque sur l'Usinage à Sec (Montréal, QC, Canada, 3-5 mars 2008)
P. Vo, M. Jahazi, S. Yue. 2008 « Recrystallization during thermomechanical processing of IMI834 ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 39 , nº 12. p. 2965-2980
X. Wang, M. Jahazi, S. Yue. 2008 « Investigation of α platelet boundaries in a near-α titanium alloy ». Materials Science and Engineering: A vol. 492 , nº 1–2. p. 450-454
P. Wanjara, M. Jahazi. 2008 « Assessing mechanical property gradients associated with microstructural changes in stainless steel weldments by shear punch testing ». International Symposium on Recent Developments in Advanced High Strength Steels Processing 2008 : Held at the 47th Conference of Metallurgists (COM) 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) Canadian Institute of Mining Metallurgy & Petroleum
P. Wanjara, M. Jahazi. 2008 « Characterization of electron beam welded 17-4 ph stainless steel ». Canadian Metallurgical Quarterly vol. 47 , nº 4. p. 413-436
P. Wanjara, E. Poirier, M. C. Jahazi. 2008 « Manufacture of a strut on a captive trajectory system by electron beam welding ». 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) Canadian Institute of Mining Metallurgy & Petroleum
Imed Zaghbani, R. Khettabi, Victor Songmene. 2008 « Base de données environnementales pour les alliages d'aluminium ». In Encyclopédie de la recherche sur l’aluminium au Québec. p. 1. Les Presses de l'aluminium PRAL
Jun Zeng, Zhaoheng Liu, Henri Champliaud. 2008 « FEM dynamic simulation and analysis of the roll-bending process for forming a conical tube ». Journal of Materials Processing Technology vol. 198 , nº 1-3. p. 330-343

N. Afrin, D. L. Chen, X. Cao, M. Jahazi. 2007 « Influence of friction stir welding on the tensile behaviour of AZ31B magnesium alloy ». Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007) Canadian Institute of Mining, Metallurgy and Petroleum
N. Afrin, D. L. Chen, X. Cao, M. Jahazi. 2007 « Strain hardening behavior of a friction stir welded magnesium alloy ». Scripta Materialia vol. 57 , nº 11. p. 1004-1007
B. Balout, Victor Songmene, Jacques Masounave. 2007 « An experimental study of dust generation during dry drilling of pre-cooled and pre-heated workpiece materials ». Journal of Manufacturing Processes vol. 9 , nº 1. p. 23-34
Thibault Bellizi, Jonathan Boisvert, Henri Champliaud, Thien-My Dao. 2007 « Estimation of the pressing force in blade forming application ». Proceedings of the IASTED International Conference on Modelling and Simulation (Montreal, Canada, May 30-June 1, 2007) ACTA Press
N. Boutana, Philippe Bocher, M. Jahazi, D. Piot, F. Motheillet. 2007 « Microstructural modeling of cold creep/fatigue in near alpha titanium alloys using cellular automata method ». Proceedings of TI-2007, 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007) Minerals, Metals and Materials Society
X. Cao, M. Jahazi. 2007 « Applications of laser welding and friction stir welding technologies for joining aerospace magnesium alloys ». LMT 2007 : proceedings of the Third International Conference on Light Metals Technology : September 24-26, 2007, Saint-Sauveur, Québec, Canada (Saint-Sauveur, QC, Canada, Sept. 24-26, 2007) National Research Council Canada = Conseil national de recherches Canada
X. Cao, M. Jahazi. 2007 « Friction stir processing of sand-cast aerospace magnesium alloy Ze41A-T5 ». Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007) Canadian Institute of Mining, Metallurgy and Petroleum
X. Cao, M. Jahazi, M. Guerin, R. S. Mishra. 2007 « Friction stir welding of an aerospace magnesium alloy ». Friction Stir Welding and Processing IV (Orlando, FL, USA, Feb. 25-Mar. 1, 2007) The Minerals, Metals & Materials Society
Xinjin Cao, Mohammad Jahazi. 2007 « New analyses of pressure filtration curves of Al alloys: a case study ». THERMEC 2006 Supplement - 5th International Conference on Processing and Manufacturing of Advanced Materials (Vancouver, BC, Canada, July 4-8, 2006) Trans Tech Publications Ltd
O Charette, Henri Champliaud, Marc Thomas. 2007 « FEM calculation of frequencies variation caused by residual stress distribution in welded structures ». Proceedings of the IASTED International Conference on Modelling and Simulation (Montreal, Canada, May 30-June 1, 2007) ACTA Press
E. Coman, L. Dubourg, M. Jahazi, K. Ghosh. 2007 « A study of the deformation and residual stresses in an aircraft fuselage panel joined by friction stir welding ». Proceedings of the 23rd ISPE Internaional Conference on CAD/CAM Robotics and Factories of the Future -CARS & FOF'07 (Bogota, Colombia, Aug. 16-18, 2007) Universidad Militar Nueva Granada
G. Corriveau, Raynald Guilbault, Antoine Tahan. 2007 « Genetic algorithms and finite element coupling for mechanical optimization ». 10th International Conference on Optimum Design in Engineering (OPTI) (Myrtle Beach, USA, May 7- 9, 2007) WITPress
G. Corriveau, Raynald Guilbault, Antoine Tahan. 2007 « Optimisation d'une turbine hydroélectrique par algorithmes génétiques ». 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montréal, Canada, June 11-13, 2007) École de technologie supérieure
F. Duchaine, H.E.N. Bersee, Henri Champliaud. 2007 « The influence of the thickness on 3D elastic material properties of unidirectional e-glass/epoxy laminated composites ». 6th Canadian International Conference on Composites (CANCOM) (Winnipeg, MB, Canada, Aug. 14-17, 2007)
François Duchaine, Henri Champliaud. 2007 « Structured mesh generation by kriging with local refinement with a new elliptic scheme ». Engineering with Computers vol. 23 , nº 1. p. 61-69
Félicia Etsida Mpiga, Thien-My Dao, Victor Songmene. 2007 « The hybrid simulation approach based on RSM and ants colony system for multiobjective optimization problem ». Proceedings of the 8th Asia Pacific Industrial Engineering & Management System and Chinese Institute of Industrial Engineers Conference (Kaohsiung, Taïwan, Dec. 9-12, 2007) APIEM & CIIE
M. Fairman, N. Afrin, D. L. Chen, X. Cao, M. Jahazi. 2007 « Microstructural and microhardness evolution of friction stir processing AZ31B-H24 magnesium alloy ». Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007) Canadian Institute of Mining, Metallurgy and Petroleum
M. Fairman, N. Afrin, D. L. Chen, X. Cao, M. Jahazi. 2007 « Microstructural evaluation of friction stir processed AZ31B-H24 magnesium alloy ». Canadian Metallurgical Quarterly vol. 46 , nº 4. p. 425-432
Zhengkun Feng, Henri Champliaud, Thien-My Dao. 2007 « Modelling and simulation of conical bending process with sliding rolls ». IFAC Workshop on Manufacturing Modelling, Management and Control (Budapest, Hungary, Nov. 14-16, 2007)
Zhengkun Feng, Henri Champliaud, J. Zeng, Thien-My Dao. 2007 « Investigation of influence of sliding of rolls over plate on continuous bending with noncompatible conical rolls ». Proceedings of the IASTED International Conference on Modelling and Simulation (Montréal, Canada, May 30-June 1, 2007) ACTA Press
Lionel Germain, Phuong Vo, Nathalie Gey, Mohammad Jahazi, Michel Humbert, Philippe Bocher. 2007 « Development of sharp local α microtextures during α/β thermo-mechanical processing of TIMETAL 834 ». 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007) Minerals, Metals and Materials Society
R. Khettabi, Victor Songmene, Jacques Masounave. 2007 « Effect of tool lead angle and chip formation mode on dust emission in dry cutting ». Journal of Materials Processing Technology vol. 194 , nº 1-3. p. 100-109
R. Khettabi, Victor Songmene, Jacques Masounave. 2007 « Modeling of fine dust during machining ». Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings (Montreal, QC, Canada, Dec. 17-19, 2007) École de technologie supérieure
L. Lacasse, Antoine Tahan, Zhaoheng Liu. 2007 « Automatic characterization of wood board surface defects ». 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montreal, Canada, June 11-13, 2007) École de technologie supérieure
D. Levesque, L. Dubourg, C. Mandache, S. E. Kruger, M. Lord, A. Merati, M. Jahazi, J-P. Monchalin. 2007 « Synthetic aperture focusing technique for the ultrasonic evaluation of friction stir welds ». Review of Progresses in Quantitative Nondestructive Evaluation : 34th Annual Review of Progress in Quantitative Nondestructive Evaluation (Golden, CO, USA, July 22-27, 2007) AIP Publishing
A. Liu, D. L. Chen, S. Bhole, X. Cao, M. Jahazi. 2007 « Corrosion behavior of the stir zone in friction stir welded dissimilar joint of 2024 aluminium to AZ31 magnesium alloys ». Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007) Canadian Institute of Mining, Metallurgy and Petroleum
Van Ngan Lê, Henri Champliaud, Brahim Amri. 2007 « A hysteresis approach of thermal expansion effect on residual stresses due to welding ». Proceedings of the IASTED International Conference on Modelling and Simulation (Montreal, Canada, May 30-June 1, 2007) ACTA Press
C. Mandache, A. Merati, L. Dubourg, M. Jahazi. 2007 « Pulsed Eddy Current Inspection of friction stir welded components ». ASNT fall conference and quality testing show 2007 (Las Vegas, NV, USA, Nov. 12-16, 2007) ASNT
Francis Martin, Van Ngan Lê, Henri Champliaud, Hoa Ngan Nguyen. 2007 « Stress concentration of shrink fit assembly using finite element method ». Proceedings of the IASTED Asian Conference on Modelling and Simulation (Beijing, China, Oct. 8-10, 2007) ACTA Press
C. Mary, M. Jahazi. 2007 « Linear friction welding of IN-718 process optimization and microstructure evolution ». THERMEC 2006 Supplement - 5th International Conference on Processing and Manufacturing of Advanced Materials (Vancouver, BC, Canada, July 4-8, 2006) Trans Tech Publications
Hassan Nasri, Jacques Lanteigne, Henri Champliaud. 2007 « Usage of the contour method in measuring residual stress in welding and peen-welding applications ». Proceedings of the IASTED Asian Conference on Modelling and Simulation (Beijing, China, Oct. 8-10, 2007) ACTA Press
H.N. Nguyen, Van Ngan Lê, Henri Champliaud, Francis Martin. 2007 « Stress concentration factor in shrink-fit shaft based on 3-D finite elements ». Proceedings of the 8th National Conference on Mechanics (Hanoi, Viêt Nam, Dec. 6-9, 2007)
Luc Parent, Victor Songmene, Jean Pierre Kenné. 2007 « A generalised model for optimising an end milling operation ». Production Planning and Control vol. 18 , nº 4. p. 319-337
Victor Songmene. 2007 « Usinage propre et concurrentiel ». Communication lors de la conférence : Conférence Scientifique sur la Sécurité des Travailleurs et le Contrôle des Risques Industriels (Montréal, QC, Canada, 2007)
Victor Songmene, Jacques Masounave, R. Khettabi. 2007 « Dry machining and its effects on productivity, costs, environment and machine-shop air quality ». 1st International Conference on Sustainable Manufacturing (Montreal, QC, Canada, Oct. 17-18, 2007)
Victor Songmene, Jacques Masounave, R. Khettabi. 2007 « Safe, environmentally-friendly and cost effective machining ». Safety Health and Environmental World Congress (SHEWC) (Santos, Brazil, July 22-25, 2007)
Antoine Tahan, Zhaoheng Liu, L. Lacasse. 2007 « New method for characterization of wood ». 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montreal, Canada, June 11-13, 2007) École de technologie supérieure
E. Uta, M. Humbert, N. Gey, A. Hazotte, Philippe Bocher, M. Jahazi. 2007 « Description and characterisation of texture heterogeneitites in titanium alloy Timetal 834 with a bimodal microstructure ». 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007) Minerals, Metals and Materials Society
P. Vo, M. Jahazi, S. Yue. 2007 « Recrystallization during Alpha + Beta Processing of IMI834 ». Proceedings of TI-2007, 11th World Conference on Titanium (Kyoto, Japan, June 1-5, 2007) Minerals, Metals and Materials Society
P. Vo, M. Jahazi, S. Yue. 2007 « Recrystallization during beta working of IMI834 ». THERMEC 2006 Supplement - 5th International Conference on Processing and Manufacturing of Advanced Materials (Vancouver, BC, Canada, July 4-8, 2006) Trans Tech Publications
Phuong Vo, M. Jahazi, S. Yue, Philippe Bocher. 2007 « Flow stress prediction during hot working of near-alpha titanium alloys ». Materials Science and Engineering: A vol. 447 , nº 1-2. p. 99-110
X. Wang, P. Vo, M. Jahazi, S. Yue. 2007 « Dwell fatigue microstructure in a near-α titanium alloy ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 38 , nº 4. p. 831-839
P. Wanjara, M. Brochu, M. Jahazi. 2007 « Electron beam freeform fabrication on stainless steel ». THERMEC 2006 (Vancouver, B.C, Canada, July 4-8, 2006) Trans Tech Publications
P. Wanjara, M. Brochu, M. Jahazi. 2007 « Electron beam freeforming of stainless steel using solid wire feed ». Materials and Design vol. 28 , nº 8. p. 2278-2286
M. Xiao, C. Poon, P. Wanjara, M. Jahazi, Z. Fawaz, P. Krimbalis. 2007 « Optimization of Nd-YAG laser welding process for Inconel 718 alloy ». Progress in Light Metals, Aerospace Materials and Superconductors (Beijing, China, June 25-30, 2006) Trans Tech Publications
Cao Xinjin, Xiao Min, M. Jahazi, T. Shariff. 2007 « Evolution of microstructures during laser surface cladding of magnesium alloy castings using welding wire ». THERMEC 2006 - Proceedings of the 5th International Conference on Processing and Manufacturing of Advanced Materials Trans Tech Publications
Imed Zaghbani, Victor Songmene, R. Khettabi. 2007 « A simplified numerical model for orthogonal cutting ». 1st International Conference on Sustainable Manufacturing (Montreal, QC, Canada, Oct. 17-18, 2007)
Imed Zaghbani, Victor Songmene, R. Khettabi. 2007 « Modeling of thin wall-parts deflection during high speed milling ». 1st International Conference on Sustainable Manufacturing (Montreal, QC, Canada, Oct. 17-18, 2007)
Jian Hua Zhao, Henri Champliaud, Thien-My Dao. 2007 « Simulation of shear spinning process using finite element method ». Proceedings of the IASTED International Conference on Modelling and Simulation (Montreal, Canada, May 30-June 1, 2007) ACTA Press
Jian-Hua Zhao, Henri Champliaud, Thien-My Dao. 2007 « Simulation of shear spinning process for pressure vessel components ». ASME Pressure Vessels and Piping Conference (PVP) (San Antonio, TX, USA, Jul. 22-26, 2007) American Society of Mechanical Engineers

H. Al-Kazzaz, M. Medraj, X. Cao, M. Xiao, M. Jahazi. 2006 « Effect of laser power and joint gap on weld quality of aerospace grade ZE41A-T5 magnesium alloy using Nd:YAG laser ». Magnesium technology in the global age : proceedings of the International Symposium on Magnesium Technology in the Global Age, October 1-4, 2006, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 1-4, 2006) Canadian Institute of Mining, Metallurgy and Petroleum
Bahaa Balout, Victor Songmene, Jacques Masounave. 2006 « Usinabilité d'alliages légers et des composites lors du perçage à sec ». Transactions of the Canadian Society for Mechanical Engineering vol. 30 , nº 3. p. 329-343
Jonathan Boisvert, Thibaut Bellizzi, Henri Champliaud, Patrice Seers. 2006 « Print depth prediction in hot forming process with a reconfigurable die ». ANSYS Conference and Exhibition (Pittsburgh, PA, USA, May 2-4, 2006)
Jonathan Boisvert, Henri Champliaud, Thibaut Bellizzi, Patrice Seers. 2006 « Simulation and optimisation of a reconfigurable discrete die for the hot forming of thick steel plates in hydro power industry ». ANSYS Conference and Exhibition (Pittsburgh, PA, USA, May 2-4, 2006)
Nabil Boutana, Philippe Bocher, Mohammad Jahazi, D. Piot, F. Montheillet. 2006 « Utilisation des automates cellulaires pour étudier le comportement en fatigue-fluage des alliages de titane ». Matériaux 2006 (Dijon, France, 13-17 nov. 2006)
P. Bélanger, A. Berry, Y. Pasco, Y. St-Amant, S. Rajan. 2006 « Active structural acoustic control of a Bell 407 transmission noise ». AHS (American Helicopter Society) 62nd Annual Forum (Phoenix, AZ, USA, May 09-11, 2006) AHS
X. Cao, M. Jahazi, J. P. Immarigeon, W. Wallace. 2006 « A review of laser welding techniques for magnesium alloys ». Journal of Materials Processing Technology vol. 171 , nº 2. p. 188-204
X. Cao, M. Jahazi, R. Mehta. 2006 « Friction stir welding of AZ31B-H24 magnesium alloy butt joints ». 6th International Friction Stir Welding Symposium 2006 (Saint-Sauveur, QC, Canada, Oct. 10-13, 2006) TWI Ltd
X. Cao, M. Xiao, M. Jahazi. 2006 « Effect of processing parameters on laser cladding of magnesium alloy castings ». Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006) Canadian Institute of Mining, Metallurgy and Petroleum
X. Cao, M. Xiao, M. Jahazi, T. Shariff. 2006 « Surface cladding of magnesium alloy castings using Nd:YAG laser ». Magnesium technology 2006 : proceedings of the symposium held during the TMS 2006 annual meeting in San Antonio, Texas, USA, March 12-16, 2006 (San Antonio, TX, USA, Mar. 12-16, 2006) The Minerals, Metals & Materials Society
L. Dubourg, F. O. Gagnon, F. Nadeau, L. St-Georges, M. Jahazi. 2006 « Process window optimization for FSW of thin and thick sheet Al alloys using statistical methods ». 6th International Friction Stir Welding Symposium 2006 (Saint-Sauveur, QC, Canada, Oct. 10-13, 2006) TWI
L. Dubourg, M. Jahazi, G. Dezaise, P. Bocher. 2006 « Microstructure and mechanical characterisation of FSW 7075-T6 lap joints ». Aerospace Materials and Manufacturing: Emerging Materials, Processes, and Repair Techniques (Montréal, Canada, Oct.1-4, 2006) Canadian Institute of Mining, Metallurgy and Petroleum
François Duchaine, E.M. Baten, Henri Champliaud, H.E.N. Bersee. 2006 « Comparison of beam theories with finite elemente analysis in three-point bending of thick composites ». 8th International Conference on Computational Structures Technology (Las Palmas de Gran Canaria, Spain, Sept.12-15, 2006) Civil-Comp Press
Martin Gagnon, Antoine Tahan, André Coutu, Marc Thomas. 2006 « Analyse modale opérationnelle en présence d'excitations harmoniques : étude de cas sur des composantes de turbine hydroélectrique ». Compte rendu 24ième séminaire sur la vibration des machines : ACVM, 25-27 octobre 2006 (Montréal, QC, Canada, 25-27 oct. 2006) ACVM
J. Gholipour, M. Jahazi. 2006 « Effect of lubricant in hydroforming of Ni-based super alloy tubes ». Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006) Canadian Institute of Mining, Metallurgy and Petroleum
Michel Humbert, L. Germain, N. Gey, Philippe Bocher, M. Jahazi. 2006 « Study of the variant selection in sharp textured regions of bimodal IMI 834 billet ». Materials Science and Engineering: A vol. 430 , nº 1-2. p. 157-164
F. Jalilian, R. A. L. Drew, M. Jahazi. 2006 « Joining of Inconel 617 sheets using TLP bonding process with Ni-Si-B interlayer ». Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006) Canadian Institute of Mining, Metallurgy and Petroleum
F. Jalilian, M. Jahazi, R. A. L. Drew. 2006 « Microstructural evolution during transient liquid phase bonding of Inconel 617 using Ni-Si-B filler metal ». Materials Science and Engineering: A vol. 423 , nº 1-2. p. 269-281
A. R. Khodabandeh, M. Jahazi, S. Yue, S. T. Aghdashi. 2006 « The determination of optimum forging conditions for the production of high strength-high impact toughness automotive parts ». Materials and Manufacturing Processes vol. 21 , nº 1. p. 105-110
J.P. Michaud, Victor Songmene, Antoine Tahan. 2006 « Aluminium alloy 7050 T7451 thin wall high-speed machining parts study ». 3th International Symposium on Aerospace Materials and Manufacturing Processes: Emerging Materials, Manufacturing, and Repair Techniques (Montreal, QC, Canada, Oct. 2-4, 2006) The Metallurgy and Materials Society
Steeve Montminy, Erick Dupuis, Henri Champliaud. 2006 « Mechanical design of a hopper robot for planetary exploration using SMA as a unique source of power ». AIAA 57th International Astronautical Congress (IAC) (Valencia, Spain, Oct. 2-6, 2006) American Institute of Aeronautics and Astronautics Inc.
D.R. Njoya, R. Khettabi, Victor Songmene, Jacques Masounave. 2006 « Influence des matériaux et des procédés d'usinage sur les émissions de poussières fines ». 45th International Conference of Metallurgists (Montréal, QC, Canada, Oct. 1-4, 2006) Institut canadien des mines
F.-É Rhéaume, Henri Champliaud, Zhaoheng Liu. 2006 « Simulating strain wave gearing torsional stiffness using the finite element method ». ANSYS Conference and Exhibition (Pittsburgh, PA, USA, May 2-4, 2006)
E. Uta, M. Humbert, N. Gey, P. Bocher, M. Jahazi. 2006 « Mise en évidence et caractérisation des hétérogénéités de textures dans l'alliage de titane IMI 834 de microstructure bimodale à vocation aéronautique ». Materiaux 2006 : Dijon, 13-17 Novembre 2006 : [recueil de la conference sur CD-ROM] (Dijon, France, 13-17 nov. 2006) Université de Bourgogne
P. Vo, S. Yue, M. Jahazi. 2006 « Microstructure development of a near alpha-titanium alloy during high temperature deformation ». Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006) Canadian Institute of Mining, Metallurgy and Petroleum
X. Wang, M. Jahazi, S. Yue. 2006 « Substructure of high temperature compressed titanium alloy IMI 834 ». Materials Science and Engineering: A vol. 434 , nº 1-2. p. 188-193
P. Wanjara, M. Brochu, M. Jahazi. 2006 « Thin gauge titanium manufacturing using multiple-pass electron beam welding ». Materials and Manufacturing Processes vol. 21 , nº 5. p. 439-451
Priti Wanjara, M. Jahazi, H. Monajati, S. Yue. 2006 « Influence of thermomechanical processing on microstructural evolution in near- alloy IMI834 ». Materials Science and Engineering: A vol. 416 , nº 1-2. p. 300-311
M. Xiao, P. Wanjara, M. Jahazi, C. Poon. 2006 « Nd:Yag-laser welding of Inconel 718 alloy ». Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006) Canadian Institute of Mining, Metallurgy and Petroleum

H. Al-Kazzaz, M. Medraj, X. Cao, M. Jahazi, X. Min. 2005 « Effect of welding speed on Nd:YAG laser weldability of ZE41A-T5 magnesium sand castings ». Light metals 2005 : proceedings of the International Symposium on Light Metals, August 21-24, 2005, Calgary, Alberta, Canada (Calgary, AB, Canada, Aug. 21-24, 2005) Canadian Institute of Mining, Metallurgy and Petroleum
P. Bocher, M. Jahazi, L. Germain, N. Gey, M. Humbert. 2005 « Variant selection in forged titanium alloys : effect of microscopic grain misorientations on the formation of macroscopic regions with similar crystallographic orientations ». Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, QC, Canada, Aug. 1-4, 2005) École de technologie supérieure
Philippe Bocher, Mohammad Jahazi, Lionel Germain, Priti Wanjara, Nathalie Gey, Michel Humbert. 2005 « β Microtexture analysis in correlation with hcp textured regions observed in a forged near alpha titanium alloy ». Solid State Phenomena vol. 105. p. 127-132
N. Boutana, P. Bocher, M. Jahazi, J. Savoie, D. Piot, F. Montheillet. 2005 « Modelling mechanical behaviour of heterogeneous materials using cellular automata : application to some forged titanium alloys ». Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, QC, Canada, Aug. 1-4, 2005) École de technologie supérieure
X. Cao, M. Jahazi. 2005 « Estimation of resistance of filter media used for Prefil Footprinter tests of liquid aluminium alloys ». Materials Science and Technology vol. 21 , nº 10. p. 1192-1198
X. Cao, M. Jahazi. 2005 « Examination and verification of the filtration mechanism of cake mode during the pressure filtration tests of liquid Al–Si cast alloys ». Materials Science and Engineering: A vol. 408 , nº 1–2. p. 234-242
X. Cao, M. Xiao, M. Jahazi, J. P. Immarigeon. 2005 « Continuous wave ND:YAG laser welding of sand-cast ZE41A-T5 magnesium alloys ». Materials and Manufacturing Processes vol. 20 , nº 6. p. 987-1004
X. Cao, M. Xiao, M. Jahazi, Y. L. Lin. 2005 « Nd:YAG laser welding of magnesium alloy castings ». Magnesium Technology 2005: Proceedings of the Symposium Held During the 2005 TMS Annual Meeting in San Francisco, California, U.S.A., February 13-17, 2005 (San Francisco, CA, USA, Feb. 13-17, 2005) The Minerals, Metals & Materials Society
J. P. Castonguay, A. S. Tahan. 2005 « Correlated characteristics identification and effect in statistical tolerance design ». WSEAS Transactions on Mathematics vol. 4 , nº 4. p. 319-326
Henri Champliaud, Abdel-Hakim Bouzid. 2005 « Computation of unloading stiffness of nonlinear gaskets using dual kriging interpolation ». Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, Canada, Aug. 1-4, 2005) École de technologie supérieure
Henri Champliaud, Abdelmajid Lajmi, Ngan Van Lê. 2005 « Finite element analysis of a three-point belt tension tester ». Non-Conference Specific Technical Papers (Troy, MI, USA, Sept. 1, 2005) SAE
Henri Champliaud, Abdelmajid Lajmi, Ngan Van Lê. 2005 « Finite element analysis of a three-point belt tension tester ». SAE Transactions : Journal of Engines vol. 114 , nº 3. p. 1533-1538
L. Germain, N. Gey, M. Humbert, P. Bocher, M. Jahazi. 2005 « β→-αs variant selection in sharp hcp textured regions of a bimodal IMI834 billet ». Proceedings of the 14th International Conference on Textures of Materials (Leuven, Belgium, July 11-15, 2005) Trans Tech Publications
L. Germain, N. Gey, M. Humbert, A. Hazotte, P. Bocher, M. Jahazi. 2005 « An automated method to analyze separately the microtextures of primary αp grains and the secondary αs inherited colonies in bimodal titanium alloys ». Materials Characterization vol. 54 , nº 3. p. 216-222
Lionel Germain, Nathalie Gey, Ludovic Humbert, Philippe Bocher, Mohammad Jahazi. 2005 « Analysis of sharp microtexture heterogeneities in a bimodal IMI 834 billet ». Acta Materialia vol. 53 , nº 13. p. 3535-3543
F. Jalilian, R. A. L. Drew, M. Jahazi. 2005 « Joining of Inconel 617 sheets in TLP bonding using Ni - P and Ni - Si - B alloys ». Trends in Welding Research - Proceedings of the 7th International Conference (Pine Mountain, GA, USA, May 16-20, 2005) ASM International
Ali Reza Khodabandeh, Mohammad Jahazi, Steve Yue, Philippe Bocher. 2005 « Impact toughness and tensile properties improvement through microstructure control in hot forged Nb-V microalloyed steel ». ISIJ International vol. 45 , nº 2. p. 272-280
H. Monajati, A. K. Taheri, M. Jahazi, S. Yue. 2005 « Deformation characteristics of isothermally forged UDIMET 720 nickel-base superalloy ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 36 , nº 4. p. 895-905
H. Monajati, F. Zarandi, M. Jahazi, S. Yue. 2005 « Strain induced γ′ precipitation in nickel base superalloy Udimet 720 using a stress relaxation based technique ». Scripta Materialia vol. 52 , nº 8. p. 771-776
Marie-Josée Potvin, Bruno Sylvestre, Henri Champliaud. 2005 « Development of a small deployable membrane antenna ». Canadian Aeronautics and Space Institute Conference (Toronto, ON, Canada, Apr. 26-27, 2005)
P. Terrier, P. Seers, H. Champliaud. 2005 « Comparison of emissions and fuel consumption between gasoline and E85 in a simulated hybrid electric vehicle ». Powertrain & Fluid Systems Conference and Exhibition (San Antonio, TX, USA, Oct. 24-27, 2005) SAE International
Marc Thomas, Henri Champliaud. 2005 « Effect of residual stresses on modal parameters of welded structures ». 23rd Seminar on Machinery Vibration (Edmonton, AB, Canada, Oct. 26-28, 2005) CMVA
P. Wanjara, C. Booth-Morrison, E. Hsu, M. Jahazi. 2005 « Process optimization for linear friction welding of Ti-6Al-4V ». Trends in welding research : proceedings of the 7th International Conference (Atlanta, GA, USA, May 16-20, 2005) ASM International
P. Wanjara, M. Brochu, S. Girard, M. Jahazi. 2005 « Electron beam freeforming on type 321 stainless steel using BNi-2 brazing paste ». Materials Science and Technology vol. 21 , nº 5. p. 613-618
P. Wanjara, M. Brochu, M. Jahazi. 2005 « Ti–6Al–4V electron beam weld qualification using laser scanning confocal microscopy ». Materials Characterization vol. 54 , nº 3. p. 254-262
P. Wanjara, M. Jahazi. 2005 « Linear friction welding of Ti-6Al-4V: Processing, microstructure, and mechanical-property inter-relationships ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 36 , nº 8. p. 2149-2164
P. Wanjara, M. Jahazi, H. Monajati, S. Yue, J. P. Immarigeon. 2005 « Hot working behavior of near-α alloy IMI834 ». Materials Science and Engineering: A vol. 396 , nº 1–2. p. 50-60
P. Wanjara, H. Monajati, M. Jahazi, L. Germain, P. Bocher, J.-P. Immarigeon. 2005 « Deformation processing mechanism and microstructural evolution in a near-alpha titanium alloy ». Materials science & technology: proceedings of the conference held September 25-28, 2005, Pittsburgh, Pennsylvania USA (Pittsburgh, PA, USA, Sept. 25-28, 2005) Association for Iron and Steel Technology

Abdel-Hakim Bouzid, Henri Champliaud. 2004 « Contact stress evaluation of nonlinear gaskets using dual kriging interpolation ». Journal of Pressure Vessel Technology vol. 126 , nº 4. p. 445-450
M. Brochu, S. Girard, M. Jahazi. 2004 « Electron beam free forming using brazing paste and solid wires as filler metal ». Aerospace materials and manufacturing : development, testing, and life cycle issues--honoring William Wallace : proceedings of the Second International Symposium on Aerospace Materials and Manufacturing: Development, Testing, and Life Cycle Issues--Honori (Hamilton, ON, Canada, Aug. 22-25, 2004) Canadian Institute of Mining, Metallurgy and Petroleum
J. Brunette, M. Jeu-Herault, Victor Songmene, Jacques Masounave. 2004 « Understanding and characterizing the drilling of recycled plastics ». Machining Science and Technology vol. 8 , nº 1. p. 141-170
X. Cao, M. Xiao, M. Jahazi. 2004 « Continuous wave Nd: YAG laser welding of ZE41 A-T5 magnesium sand castings: conduction or keyhole mode ». Aerospace materials and manufacturing : development, testing, and life cycle issues--honoring William Wallace : proceedings of the Second International Symposium on Aerospace Materials and Manufacturing: Development, Testing, and Life Cycle Issues--Honori (Hamilton, ON, Canada, Aug. 22-25, 2004) Canadian Institute of Mining, Metallurgy and Petroleum
Jean-François Chatelain, Y. Boutin, Françoise Marchand, Antoine Tahan. 2004 « Productivity assessment from advanced integration of canned cycles to CAD/CAM software ». WSEAS Transactions on Systems vol. 3 , nº 3. p. 1187-92
M. Jahazi, S. Hossein-Nejad. 2004 « The development of an optimum manufacturing and material selection process for the fabrication of labyrinth seal strips ». Journal of Materials Processing Technology vol. 152 , nº 3. p. 272-275
F. Jalilian, M. Jahazi, R. A. L. Drew, J-P. Immarigeon. 2004 « The influence of processing parameters on TLP joining of Inconel 617 alloy ». 2nd International Symposium on Aerospace Materials and Manufacturing: Development, Testing, and Life Cycle Issues - Honoring William Wallace (Hamilton, ON, Canada, Aug. 22-25, 2004) Canadian Institute of Mining, Metallurgy and Petroleum
Van Ngan Lê, Anh Dung Ngô, Françoise Marchand, Henri Champliaud, F. Packwood. 2004 « Calculating tension force in belts retaining steel rolls by finite elements ». 7th National Conference on Mechanics of Deformable Bodies (Do-Son, Vietnam, Aug. 27-28, 2004)
A. R. Mashreghi, H. Monajatizadeh, M. Jahazi, S. Yue. 2004 « High temperature deformation of nickel base superalloy Udimet 520 ». Materials Science and Technology vol. 20 , nº 2. p. 161-166
H. Monajati, M. Jahazi, R. Bahrami, S. Yue. 2004 « The influence of heat treatment conditions on gamma characteristics in Udimet 720 ». Materials Science and Engineering: A vol. 373 , nº 1-2. p. 286-293
Antoine Tahan, Victor Songmene, Jean-François Chatelain. 2004 « Case study of the application of statistical tolerances taking account of correlation ». Communication lors de la conférence : International Conference on Computers and Industrial Engineering (San Francisco, CA, USA, Nov., 2004)

Y. Amtout, Victor Songmene, Jean-François Chatelain. 2003 « Optimisation de trajectoires d'outils en FAO pour l'usinage à haute performance des moules en P20 ». Communication lors de la conférence : 4th International Conference on Industrial Automation (Montreal, QC, Canada, June 9, 2003)
Hakim A. Bouzid, Henri Champliaud. 2003 « On the use of dual kriging interpolation for the evaluation of the gasket stress distribution in bolted joints ». Pressure Vessels and Piping Conference (PVP) (Cleveland, OH, USA, Jul. 20-24, 2003) American Society of Mechanical Engineers
Henri Champliaud, François Duchaine, Van Ngan Lê. 2003 « Controlling normal direction and thickness of interpolated surfaces of complex thin parts ». 4th International Conference on Industrial Automation (Montreal, QC, Canada, June 9-11, 2003)
Henri Champliaud, Abdelmajid Lajmi, Van Ngan Lê. 2003 « Numerical approach of twist-off torque prediction for cap bottle closure ». 4th International Conference on Industrial Automation (Montreal, QC, Canada, June 9-11, 2003)
Henri Champliaud, N. V. Le. 2003 « Prediction of the leakage pressure of a cap and bottle assembly using the finite element method ». Glass Technology vol. 44 , nº 6. p. 225-230
F. Duchaine, Henri Champliaud, O. Morin, Van Ngan Lê. 2003 « Maillage par krigeage de volume par reconnaissance des contours des sections dans un environnement CAD ». Communication lors de la conférence : 71e Congrès de l'ACFAS (Rimouski, QC, Canada, 19-23 mai 2003)
L. Germain, N. Gey, M. Humbert, P. Bocher, M. Jahazi. 2003 « Texture and microtexture analysis of an IMI 834 alloy after thermo-mechanical processing ». Ti-2003 Science and Technology : proceedings of the 10th World Conference on Titanium held at the CCH-Congress Center Hamburg, Germany, 13-18 July 2003 (Hamburg, Germany, July 13-18, 2003) Wiley-VCH
M. Jahazi, A. Samadi, S. Yue. 2003 « Determination of the optimum forging conditions for a 7075 aluminum alloy ». Light metals 2003 = Métaux légers : proceedings of the International Symposium on Light Metals 2003 Métaux légers (Vancouver, BC, Canada, Aug. 25-28, 2003) [Canadian Institute of Mining, Metallurgy and Petroleum]
A. Lajmi, Henri Champliaud, Van Ngan Lê. 2003 « Effet du fluage sur le comportement du joint d'étanchéité dans les fermetures filetées ». Communication lors de la conférence : 71e Congrès de l'ACFAS (Rimouski, QC, Canada, 19-23 mai 2003)
L. Marguerit, M. Balazinski, Victor Songmene. 2003 « Drilling of MMC : influence of cutting conditions on part roughness and form error ». Communication lors de la conférence : CIRP Workshop (Paris, France, Jan., 2003)
O. Morin, Henri Champliaud, F. Duchaine, Hakim Bouzid. 2003 « Krigeage du comportement des joints d'étanchéité au chargement et au déchargement ». Communication lors de la conférence : 71e Congrès de l'ACFAS (Rimouski, QC, Canada, 19-23 mai 2003)

M. Jahazi, J. J. Jonas. 2002 « The non-equilibrium segregation of boron on original and moving austenite grain boundaries ». Materials Science and Engineering: A vol. 335 , nº 1-2. p. 49-61
M. Jahazi, A. R. Mashreghi. 2002 « Dissolution and precipitation kinetics of γ' in nickel base superalloy Udimet 520 ». Materials Science and Technology vol. 18 , nº 4. p. 458-462
Victor Songmene, Bahaa Balout, Jacques Masounave. 2002 « Drilling of metal matrix composites : cutting forces and chip formation ». International Symposium on Enabling Technologies for Light Metals and Composite Materials and their End-Products (Montreal, QC, Canada, Aug. 11-14, 2002) Canadian Institute of Mining, Metallurgy and Petroleum
Victor Songmene, M. Jeu-Herault, M. Côté, M. Duval, Jacques Masounave. 2002 « Généralités sur l'aluminium dans les alliages d'aluminium moulés : connaissances et pratiques ». : CQRDA, CTIF.

M. Jahazi, B. Eghbali. 2001 « The influence of hot forging conditions on the microstructure and mechanical properties of two microalloyed steels ». Journal of Materials Processing Technology vol. 113. p. 594-598
M. Jahazi, A. Khodabandeh, S. T. Aghdashi. 2001 « A method to improve the toughness of forged microalloyed steels ». Proceedings of the 9th Conference of Mechanical Engineering ISME 2001 (Rasht, Iran, June 6-9, 2001)
F. K. Shafie, M. Jahazi, M. Abassi. 2001 « Influence of temperature and percent reduction on aging behavior of T-250 Maraging Steel ». Proceedings of 4th International Conference on Surface Modifications and Heat Treatment (Isphahan, Iran, May 20-23, 2001)
F. K. Shafie, M. Jahazi, Y. Kharazi, M. Abassi. 2001 « Thermomechanical processing of T-250 maraging steel ». Proceedings of the 9th Conference of Mechanical Engineering ISME 2001 (Rasht, Iran, June 6-9, 2001)

S. T. Aghdashi, A. Khodabandeh, M. Jahazi. 2000 « The determination of optimum forging condiions for a vanadium containing microalloyed steel ». The Fourth International Conference on HSLA Steels October 30-November 2, 2000, Xi'an, China (Beijing, China, Oct. 30-Nov. 2, 2000) The chinese society for metals
Henri Champliaud. 2000 « Analyse par éléments finis du sertissage de capsules d'étanchéité ». 261 p.Thèse de doctorat. Montréal, École de technologie supérieure.
Henri Champliaud, Van Ngan Lê. 2000 « Finite element analysis of crowning sealing caps ». 2000 ANSYS conference proceedings (Pittsburgh, PA, USA, Aug. 28-30, 2000)
S. Hossein Nedjad, M. Jahazi. 2000 « Failure analysis and manufacturing technology of seal strips ». Proceedings of the 4th International Manufacturing Conference (Tehran, Iran, )
M. Jahazi, G. Ebrahimi. 2000 « Influence of flow-forming parameters and microstructure on the quality of a D6ac steel ». Journal of Materials Processing Technology vol. 103 , nº 3. p. 362-366
M. Jahazi, B. Egbali. 2000 « Influence of hot rolling parameters on the microstructure and mechanical properties of an ultra-high strength steel ». Journal of Materials Processing Technology vol. 103 , nº 2. p. 276-279
Mohammad Jahazi, M. Ghomi. 2000 « Texture evolution in two deep drawn aluminum alloys ». J.J. Jonas Symposium on Thermomechanical Processing of Steel: August 20-23, 2000, Ottawa, Ontario, Canada (Ottawa, ON, Canada, Aug. 20-23, 2000) Canadian Institute of Mining, Metallurgy and Petroleum
H. Monajati, M. Jahazi, H. Hosseini. 2000 « A computer code for the evaluation of the residual life of different boiler components ». Proceedings of 15th International Power Engineering Conference (Tehran, Iran, June 18-22, 2000)
A. Samadi, M. Jahazi. 2000 « The determination of optimum heat treatment conditions for the forging of a 7075 Al alloy ». Proceedings of the Second Non-Ferrous Metallurgy Congress, 9-11 May 2000, Univ. of Kerman, Iran (Kerman, Iran, May 9-11, 2000)
Victor Songmene. 2000 « Usinage des composites à matrice d'alliage d'aluminium GrA-Ni ». 200 p.Thèse de doctorat. Montréal, École Polytechnique de Montréal.

M. Jahazi, F. Jalilian. 1999 « The influence of thermochemical treatments on interface quality and properties of copper/carbon-fibre composites ». Composites Science and Technology vol. 59 , nº 13. p. 1969-1975

M. Jahazi. 1998 « The influence of thermomechanical treatment on the microstructure and mechanical properties of aisi 4130 steel ». Metals and Materials vol. 4 , nº 4. p. 818-822
M. Jahazi, G. Ebrahimi. 1998 « Flow localization during the forming of an ultra high strength steel ». Proceedings of the Sixth Annual ISME Conference, Tehran, Iran, 1998 (Tehran, Iran, 1998)
H. Monajati, M. Jahazi. 1998 « Residual life evaluation of critical boiler parts ». Proceedings of the International IME Conference, Tehran, Iran, 1998 (Tehran, Iran, 1998)

M. Jahazi, M. Ghomi. 1997 « Microstructural evolution and formability in two aluminium alloys ». Proceedings of the Fifth Annual ISME Conference, Tabriz University, Tabriz, Iran, May 4-6, 1997 (Tabriz, Iran, May 4-6, 1997)
M. Jahazi, M. Goudarzi. 1997 « The influence of thermomechanical parameters on the earing behaviour of 1050 and 1100 aluminium alloys ». Journal of Materials Processing Technology vol. 63. p. 610-613
M. Jahazi, A. Samadi. 1997 « The influence of quench parameters on the microstructure and toughness of AISI 4130 steel ». Proceedings of the International IME Conference, Tehran, Iran, 1997 (Tehran, Iran, 1997)

M. Goudarzi, M. Jahazi, A. Fallahi. 1995 « The influence of recrystallization temperature on the earing of a 1100 aluminum alloy ». Proceedings of the International Manufacturing Conference (Tehran, Iran, 1995)
M. Jahazi, M. Hosseinpour. 1995 « Fracture surface analysis of a welded ultra high strength steel ». The Metallurgist vol. 3. p. 10-17
M. Jahazi, F. Jalilian. 1995 « The determination of optimum fiber surface treatment for the production of Cu-Gr composites ». Proceedings of the Conference on Composites Materials (Tokyo, Japan, June 26, 1995) Japan Society of Mechanical Engineers
M. Jahazi, F. Jalilian. 1995 « The influence of chemical treatments on the interface quality and physical properties of copper-graphite composites ». Proceedings of the Tenth International Conference on Composite Materials : Whistler, British Columbia, Canada, August 14th-18th, 1995 (Whistler, BC, Canada, Aug. 14-18, 1995)

Marek Balazinksi, Victor Songméné. 1994 « Fraisage de l'Inconel 600 à avance variable ». Communication lors de la conférence : 62e Congrès de l'ACFAS (Montréal, QC, Canada, 16-20 mai 1994)
M. Hosseinpour, M. Jahazi. 1994 « Optimum welding of AISI 4130 steel ». Proceedings of the 2nd International ISME Conference (Tehran, Iran, May 2-5, 1994)
M. Hosseinpour, M. Jahazi. 1994 « The influence of welding parameters on the HAZ microstructure of an ultra high strength steel ». International Conference on Recent Advances in Materials and Mineral Resources (RAMM '94) : 3-5 May 1994, Penang, Malaysia (Penang, Malaysia, May 3-5, 1994)
F. Jalilian, M. Jahazi. 1994 « The effect of surface treatments on the physical behavior of copper-graphite composites ». International Conference on Recent Advances in Materials and Mineral Resources (RAMM '94): 3-5 May 1994, Penang, Malaysia (Penang, Malaysia, May 3-5, 1994)
F. Jalilian, A. Sedghi, M. Jahazi. 1994 « The influence of carbon fiber surface treatment on the mechanism of copper growth ». Proceedings of the 2nd International ISME Conference (Tehran, Iran, May 2-5, 1994)
H. Sadeghi, M. Shariati, M. Jahazi. 1994 « A computer code for the prediction of forming steps in precision forging ». Proceedings of the 2nd International ISME Conference (Tehran, Iran, May 2-5, 1994)

I. A. Akmoulin, M. Djahazi, N. D. Buravova, J. J. Jonas. 1993 « Superplastic forging procedures for manufacture of ceramic yttria stabilised tetragonal zirconia products ». Materials Science and Technology vol. 9 , nº 1. p. 26-33
S. A. Tahan, I. Kamwa, P. Viarouge, M. Ferfra. 1993 « A generalized model of satured synchronous machines ». Computational aspects of electromechanical energy converters and drives, 7-8-9 July 1993 : proceedings [of the the] 4th international conference = La modelisation en simulation des machines electriques et des convertisseurs statiques, 7-8-9 Juillet 1993 : (Montreal, QC, Canada, July 7-9, 1993) International Association for Mathematics and Computers in Simulation
S. A. Tahan, I. Kamwa, P. Viarouge, M. Ferfra, H. Le-Huy. 1993 « Identification of solid-rotor asynchronous-machine parameters from standstill tests in the time domain using nonlinear techniques ». Computational aspects of electromechanical energy converters and drives, 7-8-9 July 1993 : proceedings [of the the] 4th international conference = La modelisation en simulation des machines electriques et des convertisseurs statiques, 7-8-9 Juillet 1993 : (Montreal, QC, Canada, July 7-9, 1993) International Association for Mathematics and Computers in Simulation

M. Djahazi, X. L. He, J. J. Jonas, W. P. Sun. 1992 « Influence of boron on nature and distribution of strain induced precipitates in (Ti,Nb) high strength low alloy steels ». Materials Science and Technology vol. 8 , nº 7. p. 628-636
M. Djahazi, X. L. He, J. J. Jonas, W. P. Sun. 1992 « Nb(C, N) Precipitation and Austenite Recrystallization in Boron-containing high-strength low-alloy steels ». Metallurgical Transactions A: Physical Metallurgy and Materials Science vol. 23 A , nº 8. p. 2111-2120
F. Jalilian, A. Sedghi, M. Jahazi. 1992 « The influence of chemical surface treatment on the wettability of carbon fibers ». Proceedings of the International Confrence on Tribology (Isfahan, Iran, 1992)

A. Akmoulin, M. Djahazi, J. J. Jonas. 1991 « Effect of initial porosity on the superplastic behavior of Y-TZP in vacuum ». Superplasticity in advanced materials: proceedings of the International Conference on Superplasticity in Advanced Materials held in Osaka, Japan, June 3-6, 1991 (Osaka, Japan, June 3-6, 1991)
I. A. Akmoulin, M. Djahazi, J. J. Jonas. 1991 « Enhanced deformation behavior of incompletely sintered Y-TZP zirconia ». Scripta metallurgica et materialia vol. 25 , nº 5. p. 1035-1040
X. L. He, M. Djahazi, J. J. Jonas, J. Jackman. 1991 « The non-equilibrium segregation of boron during the recrystallization of Nb-treated HSLA steels ». Acta Metallurgica et Materialia vol. 39 , nº 10. p. 2295-2308
Souheil-Antoine Tahan, Abdallah El Chebair, John Dickinson. 1991 « Étude théorique de la stabilité des coques cylindriques soumises à un écoulement axial ». Communication lors de la conférence : 59e congrès de l'ACFAS (Sherbrooke, QC, Canada, 21-24 mai 1991)

M. Djahazi, X. L. He, J. J. Jonas. 1990 « Acceleration of Nb(C, N) precipitation in HSLA steels by boron addition ». HSLA steels, processing, properties and applications: proceedings of the Second International Conference on HSLA Steels October 28th-November 2nd, 1990, Beijing, China (Beijing, China, Oct. 28-Nov. 2, 1990)
M. Djahazi, X. L. He, J. J. Jonas, L. Collins. 1990 « The effect of Nb and b on austenite recrystallization ». Recrystallization '90: International Conference on Recrystallization in Metallic Materials: conference proceedings (Wollongong, Australia, Jan. 22-26, 1990) TMS (The Minerals, Metals & Materials Society)

M. Djahazi, X. L. He, J. J. Jonas. 1988 « Effect of boron on the kinetics of precipitation in deformed austenite ». Thermec-88: International Conference on Physical Metallurgy of Thermomechanical Processing of Steels and Other Metals: proceedings, June 6-10, 1988, Keidanren Kaikan, Tokyo, Japan (Tokyo, Japan, June 6-10, 1988) Iron and Steel Institute of Japan
M. Djahazi, X. L. He, J. J. Jonas, G. E. Ruddle. 1988 « Influence of boron distribution on recrystallization and precipitation in a Nb-Ti HSLA steel ». Processing, microstructure, and properties of HSLA steels: proceedings of an International Symposium on Processing, Microstructure, and Properties of HSLA Steels (Pittsburgh, PA, USA, Nov. 3-5, 1987)

M. Djahazi, X. L. He, J. J. Jonas. 1987 « Effect of boron on the precipitation of carbonitrides in a Nb-Ti HSLA steel ». 29th Mechanical Working and Steel Processing Conference: proceedings (Toronto, ON, Canada, Oct. 21-23, 1987)

Portes ouvertes

Publications

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1995

1994

1993

1992

1991

1990

1988

1987