Ali Ahmadi

• Development of a Mist-Based Technologies for Droplet-Based and Coaxial Bioprinting of Ionically Crosslinking Hydrogels, par Badr,Sara.
  Hiver 2023
  
• Development of a Foam-Based Method for Coaxial Bioprinting of Ionically Crosslinking Bioinks, par Madadian,Elias.
  Été 2023
  
• En codirection avec : Lerouge, Sophie
  Microfabrication of Technologies to Examine the Correlation between the Microbiome and Cancer, par Wheatley,Sydney.
  Été 2023
  
• En codirection avec : Ahmadi, Ali
  Bioimpression et caractérisation de tissus cartilagineux par méthode FRESH, par Gigodot,Aude.
  Été 2023
  

Monica Angela Cella, Thomas Coulson, Samantha MacEachern, Sara Badr, Ali Ahmadi, Mahdis Sadat Tabatabaei, Alain Labbe, Mansel William Griffiths. 2023. « Probiotic disruption of quorum sensing reduces virulence and increases cefoxitin sensitivity in methicillin-resistant Staphylococcus aureus ». Scientific Reports. vol. 13 , nº 1.

S. Badr, B. MacCallum, E. Madadian, G. Kerr, E. Naseri, D. MacDonald, A. Bodaghkhani, R. A. Tasker, A. Ahmadi. 2022. « Development of a mist-based printhead for droplet-based bioprinting of ionically crosslinking hydrogel bioinks ». Bioprinting. vol. 27

Shanghuan Feng, Kang Kang, Shakirudeen Salaudeen, Ali Ahmadi, Quan Sophia He, Yulin Hu. 2022. « Recent advances in algae-derived biofuels and bioactive compounds ». Industrial and Engineering Chemistry Research. vol. 61 , nº 3. p. 1232-1249.

Mohsen Gorji, Dara Zarbaf, Saeedeh Mazinani, Abolfazl Sajadi Noushabadi, Monica A. Cella, Ali Sadeghianmaryan, Ali Ahmadi. 2022. « Multi-responsive on-demand drug delivery PMMA-co-PDEAEMA platform based on CO2, electric potential, and pH switchable nanofibrous membranes ». Journal of Biomaterials Science-Polymer Edition. (Sous presse)

Samantha Macdougall, Fatih Bayansal, Ali Ahmadi. 2022. « Emerging methods of monitoring volatile organic compounds for detection of plant pests and disease ». Biosensors. vol. 12 , nº 4.

Emad Naseri, Ali Ahmadi. 2022. « A review on wound dressings: Antimicrobial agents, biomaterials, fabrication techniques, and stimuli-responsive drug release ». European Polymer Journal. vol. 173

Emad Naseri, Anthony Van Beek, Ali Ahmadi. 2022. « Application of electrowetting on dielectric (EWOD) in drug release control and release-on-demand ». Colloids and Surfaces A: Physicochemical and Engineering Aspects. vol. 654

Emily Pope, Christopher Cartmell, Bradley Haltli, Ali Ahmadi, Russell G. Kerr. 2022. « Microencapsulation and in situ incubation methodology for the cultivation of marine bacteria ». Frontiers in Microbiology. vol. 13

Emily Pope, Bradley Haltli, Russell G. Kerr, Ali Ahmadi. 2022. « Effects of matrix composition and temperature on viability and metabolic activity of microencapsulated marine bacteria ». Microorganisms. vol. 10 , nº 5.

Ali Sadeghianmaryan, Saman Naghieh, Ali Salimi, Kourosh Kabiri, Monica A. Cella, Ali Ahmadi. 2022. « Fabrication of cellulosic nonwoven-based wound dressings coated with CTAB-loaded double network PAMPS/PNaA hydrogels ». Journal of Natural Fibers. (Sous presse)

Sydney K. Wheatley, Christopher Cartmell, Elias Madadian, Sara Badr, Bradley A. Haltli, Russell G. Kerr, Ali Ahmadi. 2022. « Microfabrication of a micron-scale microbial-domestication pod for in situ cultivation of marine bacteria ». RSC Advances. vol. 12 , nº 43. p. 28123-28127.

Tartela Alkayyali, Emily Pope, Sydney K. Wheatley, Christopher Cartmell, Bradley Haltli, Russell G. Kerr, Ali Ahmadi. 2021. « Development of a microbe domestication pod (MD Pod) for in situ cultivation of micro-encapsulated marine bacteria ». Biotechnology and Bioengineering. vol. 118 , nº 3. p. 1166-1176.

Haley M. Butler, Emad Naseri, Debra S. MacDonald, R. Andrew Tasker, Ali Ahmadi. 2021. « Investigation of rheology, printability, and biocompatibility of N,O-carboxymethyl chitosan and agarose bioinks for 3D bioprinting of neuron cells ». Materialia. vol. 18

Walid I. Mazyan, Ellen O’connor, Elia Martin, Anja Vogt, Edward Charter, Ali Ahmadi. 2021. « Effects of temperature and extraction time on avocado flesh (Persea americana) total phenolic yields using subcritical water extraction ». Processes. vol. 9 , nº 1. 13 p.

Emad Naseri, Christopher Cartmell, Matthew Saab, Russell G. Kerr, Ali Ahmadi. 2021. « Development of N,O-Carboxymethyl Chitosan-starch biomaterial inks for 3D printed wound dressing applications ». Macromolecular Bioscience. vol. 21 , nº 12.

Mozhgan Nikdel, Hossein Rajabinejad, Hashem Yaghoubi, Elmira Mikaeiliagah, Monica A. Cella, Ali Sadeghianmaryan, Ali Ahmadi. 2021. « Fabrication of cellulosic nonwoven material coated with polyvinyl alcohol and zinc oxide/mesoporous silica nanoparticles for wound dressing purposes with cephalexin delivery ». ECS Journal of Solid State Science and Technology. vol. 10 , nº 5.

Tartela Alkayyali, Ali Ahmadi. 2020. « Fabrication of microfluidic chips using controlled dissolution of 3D printed scaffolds ». Journal of Applied Polymer Science. vol. 137 , nº 46.

Haley M. Butler, Emad Naseri, Debra S. MacDonald, R. Andrew Tasker, Ali Ahmadi. 2020. « Optimization of starch- and chitosan-based bio-inks for 3D bioprinting of scaffolds for neural cell growth ». Materialia. vol. 12

Tiffany Cameron, Emad Naseri, Ben MacCallum, Ali Ahmadi. 2020. « Development of a disposable single-nozzle printhead for 3D bioprinting of continuous multi-material constructs ». Micromachines. vol. 11 , nº 5.

B. MacCallum, E. Naseri, H. Butler, W. MacNevin, R. A. Tasker, A. Ahmadi. 2020. « Development of a 3D bioprinting system using a Co-Flow of calcium chloride mist ». Bioprinting. vol. 20

W. I. Mazyan, A. Ahmadi, H. Ahmed, M. Hoorfar. 2020. « Increasing the COP of a refrigeration cycle in natural gas liquefaction process using refrigerant blends of Propane-NH3, Propane-SO2 and Propane-CO2 ». Heliyon. vol. 6 , nº 8.

Emad Naseri, Haley Butler, Wyatt MacNevin, Marya Ahmed, Ali Ahmadi. 2020. « Low-temperature solvent-based 3D printing of PLGA: A parametric printability study ». Drug Development and Industrial Pharmacy. vol. 46 , nº 2. p. 173-178.

Emad Naseri, Christopher Cartmell, Matthew Saab, Russell G. Kerr, Ali Ahmadi. 2020. « Development of 3D printed drug-eluting scaffolds for preventing piercing infection ». Pharmaceutics. vol. 12 , nº 9. 16 p.

T. Alkayyali, T. Cameron, B. Haltli, R. G. Kerr, A. Ahmadi. 2019. « Microfluidic and cross-linking methods for encapsulation of living cells and bacteria - A review ». Analytica Chimica Acta. vol. 1053 p. 1-21.

Cael Warner, Cameron M. McDermid, Ali Ahmadi, Loïc Markley. 2019. « Impact of electrode design and voltage waveform on low-potential magnetohydrodynamic fluid actuation ». Microfluidics and Nanofluidics. vol. 23 , nº 7.

W. I. Mazyan, A. Ahmadi, J. Brinkerhoff, H. Ahmed, M. Hoorfar. 2018. « Enhancement of cyclone solid particle separation performance based on geometrical modification: Numerical analysis ». Separation and Purification Technology. vol. 191 p. 276-285.

W. I. Mazyan, A. Ahmadi, H. Ahmed, M. Hoorfar. 2017. « Enhancement of solid particle separation efficiency in gas cyclones using electro-hydrodynamic method ». Separation and Purification Technology. vol. 182 p. 29-35.

W. I. Mazyan, A. Ahmadi, H. Ahmed, M. Hoorfar. 2017. « Increasing efficiency of natural gas cyclones through addition of tangential chambers ». Journal of Aerosol Science. vol. 110 p. 36-42.

Mohammad Paknahad, Ali Ahmadi, Jacques Rousseau, Hojatollah Rezaei Nejad, Mina Hoorfar. 2017. « On-chip electronic nose for wine tasting: A digital microfluidic approach ». IEEE Sensors Journal. vol. 17 , nº 14. p. 4322-4329.

Mohammad Paknahad, Jannat Singh Bachhal, Ali Ahmadi, Mina Hoorfar. 2017. « Characterization of channel coating and dimensions of microfluidic-based gas detectors ». Sensors and Actuators, B: Chemical. vol. 241 p. 55-64.

A. Ahmadi, C. M. McDermid, L. Markley. 2016. « Magnetohydrodynamic actuation of droplets for millimetric planar fluidic systems ». Applied Physics Letters. vol. 108 , nº 1.

Eric Cheng, Haoran Yu, Ali Ahmadi, Karen C. Cheung. 2016. « Investigation of the hydrodynamic response of cells in drop on demand piezoelectric inkjet nozzles ». Biofabrication. vol. 8 , nº 1.

W. I. Mazyan, A. Ahmadi, R. D. Jesus, H. Ahmed, M. Hoorfar. 2016. « Use of ferrous powder for increasing the efficiency of solid particle filtration in natural gas cyclones ». Separation Science and Technology. vol. 51 , nº 12. p. 2098-2104.

W. Mazyan, A. Ahmadi, H. Ahmed, M. Hoorfar. 2016. « Market and technology assessment of natural gas processing: A review ». Journal of Natural Gas Science and Engineering. vol. 30 p. 487-514.

B. Parker, R. Samanipour, A. Ahmadi, K. Kim. 2016. « Rapid fabrication of circular channel microfluidic flow-focusing devices for hydrogel droplet generation ». Micro and Nano Letters. vol. 11 , nº 1. p. 41-45.

Roya Samanipour, Zongjie Wang, Ali Ahmadi, Keekyoung Kim. 2016. « Experimental and computational study of microfluidic flow-focusing generation of gelatin methacrylate hydrogel droplets ». Journal of Applied Polymer Science. vol. 133 , nº 29.

E. Cheng, A. Ahmadi, K. C. Cheung. 2015. « Measurement of the oscillatory flow field inside tapered cylindrical inkjet nozzles using micro-particle image velocimetry ». Microfluidics and Nanofluidics. vol. 19 , nº 3. p. 635-646.

George Luka, Ali Ahmadi, Homayoun Najjaran, Evangelyn Alocilja, Maria Derosa, Kirsten Wolthers, Ahmed Malki, Hassan Aziz, Asmaa Althani, Mina Hoorfar. 2015. « Microfluidics integrated biosensors: A leading technology towards lab-on-A-chip and sensing applications ». Sensors. vol. 15 , nº 12. p. 30011-30031.

Hojatollah Rezaei Nejad, Ehsan Samiei, Ali Ahmadi, Mina Hoorfar. 2015. « Gravity-driven hydrodynamic particle separation in digital microfluidic systems ». RSC Advances. vol. 5 , nº 45. p. 35966-35975.

Mohamed Yafia, Ali Ahmadi, Mina Hoorfar, Homayoun Najjaran. 2015. « Ultra-portable smartphone controlled integrated digital microfluidic system in a 3D-printed modular assembly ». Micromachines. vol. 6 , nº 9. p. 1289-1305.

Michael H. Winer, Ali Ahmadi, Karen C. Cheung. 2014. « Application of a three-dimensional (3D) particle tracking method to microfluidic particle focusing ». Lab on a Chip. vol. 14 , nº 8. p. 1443-1451.

Ali Ahmadi, Matthew D. Buat, Mina Hoorfar. 2013. « Microdroplet evaporation in closed digital microfluidic biochips ». Journal of Micromechanics and Microengineering. vol. 23 , nº 4.

Ali Ahmadi, Kurt D. Devlin, Mina Hoorfar. 2012. « Numerical study of the microdroplet actuation switching frequency in digital microfluidic biochips ». Microfluidics and Nanofluidics. vol. 12 , nº 1-4. p. 295-305.

Daljeet Chahal, Ali Ahmadi, Karen C. Cheung. 2012. « Improving piezoelectric cell printing accuracy and reliability through neutral buoyancy of suspensions ». Biotechnology and Bioengineering. vol. 109 , nº 11. p. 2932-2940.

Ali Ahmadi, Jonathan F. Holzman, Homayoun Najjaran, Mina Hoorfar. 2011. « Electrohydrodynamic modeling of microdroplet transient dynamics in electrocapillary-based digital microfluidic devices ». Microfluidics and Nanofluidics. vol. 10 , nº 5. p. 1019-1032.

Ali Ahmadi, Kurt D. Devlin, Homayoun Najjaran, Jonathan F. Holzman, Mina Hoorfar. 2010. « In situ characterization of microdroplet interfacial properties in digital microfluidic systems ». Lab on a Chip. vol. 10 , nº 11. p. 1429-1435.

A. Ahmadi, H. Najjaran, J. F. Holzman, M. Hoorfar. 2009. « Two-dimensional flow dynamics in digital microfluidic systems ». Journal of Micromechanics and Microengineering. vol. 19 , nº 6.

Jacqueline Nichols, Ali Ahmadi, Mina Hoorfar, Homayoun Najjaran, Jonathan F. Holzman. 2009. « In situ digital microfluidic conductance sampling ». Sensors and Actuators, A: Physical. vol. 152 , nº 1. p. 13-20.

B. Enright, E. Cheng, H. Yu, K. C. Cheung, A. Ahmadi. 2020. « Inkjet system design optimization for reliable cell printing ». 21st International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (Savannah, GA, USA, Oct. 22-26, 2017) p. 1149-1150. Chemical and Biological Microsystems Society.

Ben MacCallum, Sara Badr, Emad Naseri, Armin Bodaghkhani, Ali Ahmadi. 2020. « Development of a mist-based hydrogel crosslinking printhead for droplet-based bioprinting ». MicroTAS 2020 - 24th International Conference on Miniaturized Systems for Chemistry and Life Sciences (En ligne, Oct. 04-09, 2020) p. 384-385. Chemical and Biological Microsystems Society.

Emily Pope, Tartela Alkayyali, Sydney K. Wheatley, Christopher Cartmell, Jultwahnique McDonald, Bradley Haltli, Russell G. Kerr, Ali Ahmadi. 2020. « Optimization of marine bacteria microencapsualtion for the discovery of novel marine natural products ». MicroTAS 2020 - 24th International Conference on Miniaturized Systems for Chemistry and Life Sciences (En ligne, Oct. 04-09, 2020) p. 811-812. Chemical and Biological Microsystems Society.

Sydney K. Wheatley, Christopher Cartmell, Bradley A. Haltli, Russell G. Kerr, Ali Ahmadi. 2020. « Development of a micro-microbial domestication pod for in-situ marine bacterial cultivation ». MicroTAS 2020 - 24th International Conference on Miniaturized Systems for Chemistry and Life Sciences (En ligne, Oct. 04-09, 2020) p. 438-439. Chemical and Biological Microsystems Society.

Tartela Alkayyali, Emily Pope, Bradley Haltli, Russell G. Kerr, Ali Ahmadi. 2019. « Cultivation of 'uncultivable' marine sediment bacteria using a microbial domestication pod (MD Pod) ». 23rd International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (Basel, Switzerland, Oct. 27-31, 2019) p. 528-529. Chemical and Biological Microsystems Society.

Ben MacCallum, Emad Naseri, Wyatt MacNevin, Ali Ahmadi. 2019. « 3D bioprinting of alginate hydrogel scaffolds using fine calcium chloride mist droplets ». 23rd International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (Basel, Switzerland, Oct. 27-31, 2019) p. 1668-1669. Chemical and Biological Microsystems Society.

Tartela Alkayyali, Bradley Haltli, Russell G. Kerr, Ali Ahmadi. 2018. « A microbial domestication pod for the discovery of natural products ». 22nd International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (Kaohsiung, Taiwan, Nov. 11-15, 2018) p. 1707-1710. Chemical and Biological Microsystems Society.

B. Gallant, A. Gamble, C. Harding, J. Mayhew, A. Parker, A. Simmons, A. Ahmadi. 2017. « Ultra-portable, selective and diffusion-based breathalyzer ». ISOCS/IEEE International Symposium on Olfaction and Electronic Nose (ISOEN) (Montreal, QC, Canada, May 28-31, 2017) Institute of Electrical and Electronics Engineers Inc..

Eric Cheng, Haoran Yu, Ali Ahmadi, Karen C. Cheung. 2016. « Rheological manipulation for improved reliability in inkjet printing of living cells ». IEEE 29th International Conference on Micro Electro Mechanical Systems (MEMS) (Shanghai, China, Jan. 24-28, 2016) p. 784-787. Institute of Electrical and Electronics Engineers Inc..

Y. Li, A. Ahmadi, H. Yu, K. C. Cheung. 2016. « Beyond poisson: Passive focusing toward one-cell-per-drop printing ». 20th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (Dublin, Ireland, Oct. 09-13, 2016) p. 735-736. Chemical and Biological Microsystems Society.

Yan Li, Eric Cheng, Haoran Yu, Ali Ahmadi, Karen C. Cheung. 2016. « Investigations of bio-ink rheological properties for drop on demand piezoelectric cell printing ». Solid-State Sensors, Actuators and Microsystems Workshop (Hilton Head Island, SC, USA, June 05-09, 2016) p. 306-309. Transducer Research Foundation.

Mohammad Paknahad, Ali Ahmadi, Breanne Enright, Karen C. Cheung, Mina Hoorfar. 2016. « Density-based single particle isolation using micro-wells on digital microfluidics ». 20th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (Dublin, Ireland, Oct. 09-13, 2016) p. 880-881. Chemical and Biological Microsystems Society.

Mohammad Paknahad, Ali Ahmadi, Mina Hoorfar. 2016. « Diffusion-based microfluidic breath analyzer for detection of cannabis use ». 20th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (Dublin, Ireland, Oct. 09-13, 2016) p. 1272-1273. Chemical and Biological Microsystems Society.

Mohammad Paknahad, Jannat Singh Bachhal, Ali Ahmadi, Mina Hoorfar. 2016. « Highly selective multi-target 3D-printed microfluidic-based breath analyzer ». IEEE 29th International Conference on Micro Electro Mechanical Systems (MEMS) (Shanghai, China, Jan. 24-28, 2016) p. 905-908. Institute of Electrical and Electronics Engineers Inc..

K. He, A. Ahmadi, K. Walus, B. Stoeber. 2015. « On demand EWOD dropl let formation at a microfluidic T-junction ». Transducers - 2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS) (Anchorage, AK, USA, June 21-25, 2015) p. 1846-1849. Institute of Electrical and Electronics Engineers Inc..

W. I. Mazyan, A. Ahmadi, H. Ahmed, M. Hoorfar. 2015. « Investigation of methods of enhancing the performance of propane pre-cooling refrigeration cycles in natural gas liquefaction processes ». Abu Dhabi International Petroleum Exhibition and Conference (ADIPEC) (Abu Dhabi, UAE, Nov. 09-12, 2015) Society of Petroleum Engineers.

M. Yafia, A. Ahmadi, K. Yesilcimen, M. Hoorfar, H. Najjaran. 2015. « Low cost smartphone controlled digital microfluidic chip in a 3D-printed modular assembly with replacable glass and screen printed paper chips ». MicroTAS 2015 - 19th International Conference on Miniaturized Systems for Chemistry and Life Sciences (Gyeongju, South Korea, Oct. 25-29, 2015) p. 2099-2100. Chemical and Biological Microsystems Society.

Eric Cheng, Ali Ahmadi, Karen C. Cheung. 2014. « Investigation of the hydrodynamics of suspended cells for reliable inkjet cell printing ». ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels collocated with the ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting (Chicago, IL, USA, Aug. 03-07, 2014) American Society of Mechanical Engineers.

H. Rezaei Nejad, E. Samiei, A. Ahmadi, M. Hoorfar. 2014. « Hydrodynamic density-based particle focusing in digital microfluidic systems ». 18th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (San Antonio, TX, USA, Oct. 26-30, 2014) p. 1446-1448. Chemical and Biological Microsystems Society.

M. H. Winer, A. Ahmadi, K. C. Cheung. 2014. « Effects of density difference between particles and fluid on inertial focusing positions in transient micro-flows ». 18th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (San Antonio, TX, USA, Oct. 26-30, 2014) p. 2462-2464. Chemical and Biological Microsystems Society.

Michael H. Winer, Ali Ahmadi, Karen C. Cheung. 2014. « Apparent size correlation: A simple method to determine vertical positions of particles using conventional microscopy ». IEEE 27th International Conference on Micro Electro Mechanical Systems (MEMS) (San Francisco, CA, USA, Jan. 26-30, 2014) p. 939-942. Institute of Electrical and Electronics Engineers Inc..

Michael H. Winer, Ali Ahmadi, Karen C. Cheung. 2014. « Transient inertial flows: A new degree of freedom for particle focusing in microfluidic channels ». IEEE 27th International Conference on Micro Electro Mechanical Systems (MEMS) (San Francisco, CA, USA, Jan. 26-30, 2014) p. 1051-1054. Institute of Electrical and Electronics Engineers Inc..

S. T. Beyer, A. Bsoul, A. Ahmadi, K. Walus. 2013. « 3D alginate constructs for tissue engineering printed using a coaxial flow focusing microfluidic device ». Transducers & Eurosensors XXVII: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS & EUROSENSORS XXVII) (Barcelona, Spain, June 16-20, 2013) p. 1206-1209. IEEE.

Anas Bsoul, Simon Beyer, Ali Ahmadi, Boris Stoeber, Edniond Cretu, Konrad Walus. 2013. « Molded biocompatible and disposable PDMS/SU-8 inkjet dispenser ». 17th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (Freiburg, Germany, Oct. 27-31, 2013) p. 636-638. Chemical and Biological Microsystems Society.

Ali Ahmadi, Mina Hoorfar. 2011. « Numerical investigation of the combined effects of biomolecular adsorption and microdroplet evaporation on the performance of the electrocapillary-based digital microfluidic systems ». ASME 2011 9th International Conference on Nanochannels, Microchannels, and Minichannels (Edmonton, AB, Canada, June 19-22, 2011) p. 139-147. The American Society of Mechanical Engineers.

A. Ahmadi, K. D. Devlin, H. Najjaran, J. F. Holzman, M. Hoorfar. 2010. « Biomolecular adsorption phenomena in electrowetting-based digital microfluidic devices ». Nanotechnology 2010: Electronics, Devices, Fabrication, MEMS, Fluidics and Computational - Technical Proceedings of the 2010 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2010 (Anaheim, CA, USA, June 21-24, 2010) p. 452-455. Boston, Mass. ; Boca Raton, Fla. : Nano Science and Technology Institute ; CRC Press.

Ali Ahmadi, Jonathan F. Holzman, Homayoun Najjaran, Mina Hoorfar. 2010. « Numerical multiphysics modeling of microdroplet motion dynamics in digital microfluidic systems ». ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels collocated with 3rd Joint US-European Fluids Engineering Summer Meeting (Montreal, QC, Canada, Aug. 01-05, 2010) p. 249-253. The American Society of Mechanical Engineers.

K. D. Devlin, A. Ahmadi, H. Najjaran, J. F. Holzman, M. Hoorfar. 2010. « Dynamic sampling in digital microfluidic devices ». Micro- and Nanotechnology Sensors, Systems, and Applications II (Orland, FL, USA, May 5, 2010) SPIE.

A. Ahmadi, H. Najjaran, J. F. Holzman, M. Hoorfar. 2009. « Determination of droplet shape in digital microfluidic systems using two-dimensional flow analysis ». Technical Proceedings of the 2009 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2009 (Houston, TX, USA, May 03-07, 2009) p. 351-354. Boston : Nano Science and Technology Institute.

A. Ahmadi, J. Nichols, M. Hoorfar, H. Najjaran, J. F. Holzman. 2009. « Digital implementations for integrated microfluidic sensing ». Micro- and Nanotechnology Sensors, Systems, and Applications (Orlando, FL, USA, Apr. 15-17, 2009) SPIE.

A. Ahmadi, H. Najjaran, J. F. Holzman, M. Hoorfar. 2008. « Numerical modeling of microdrop motion in a digital microfluidic multiplexer ». Technical Proceedings of the 2008 NSTI Nanotechnology Conference and Trade Show, NSTI-Nanotech, Nanotechnology 2008 (Boston, MA, USA, June 01-05, 2008) p. 561-564. Boston ; Boca Raton, FL : Nano Science and Technology Institute ; CRC Press.

Jackie Nichols, Ali Ahmadi, Mina Hoorfar, Homayoun Najjaran, Jonathan F. Holzman. 2008. « Micro-drop actuation using multiplexer structures ». ASME 2008 6th International Conference on Nanochannels, Microchannels, and Minichannels (Darmstadt, Germany, June 23-25, 2008) p. 1085-1092. The American Society of Mechanical Engineers.