Yvan Beauregard

Professeur
Degrees B.Ing. (Polytechnique Montréal), M.B.A. (McGill), Ph.D. (Université Concordia)
Office A-2828
Presentation

Département de génie mécanique

Research interests:

  • Aerospace
  • Information and Communications Technologies
  • Health

Research areas:

  • Project management
  • Operation management
  • Quality management
  • Product development
  • Lean engineering
Publications: conference_itemau

Publications: conference_itemau

Publications: conference_item
38th International Annual Conference of the American Society for Engineering Management (ASEM 2017)
Publications: conference_item
11ème Conférence Francophone de Modélisation, Optimisation et Simulation (MOSIM)
Publications: conference_itemau

Publications: conference_item
IEEE International Conference on Industrial Engineering and Engineering Management (IEEM)
Publications: article

Publications: article

Publications: conference_item
7th International Conference on Industrial Engineering and Systems Management (IESM 2017)
Publications: conference_item
Proceedings of the 2016 Industrial and Systems Engineering Research Conference, ISERC 2016
Publications: conference_item
Proceedings of the International Conference on Industrial Engineering and Operations Management
Publications: conference_itemaff

Publications: article

Publications: conference_item
38th International Annual Conference of the American Society for Engineering Management (ASEM 2017)
Publications: conference_item
11th International Conference on Modeling, Optimization & Simulation (MOSIM 2016)
Publications: article

Publications: article

Publications: article

Publications: conference_item
11ème Conférence Francophone de Modélisation, Optimisation et Simulation (MOSIM)
Publications: conference_item
10th Annual International Conference on Industrial Engineering and Operations Management
Publications: conference_item
5th North American Conference on Industrial Engineering and Operations Management
Publications: conference_item
62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference
Publications: article

Publications: conference_item
38th International Annual Conference of the American Society for Engineering Management (ASEM 2017)
Publications: article

Publications: article

Publications: conference_item
11th International Conference on Modeling, Optimization & Simulation (MOSIM 2016)
Publications: article

Publications: conference_item
Proceedings of the 11th Annual International Conference on Industrial Engineering and Operations Management
Publications: article

Publications: conference_item
IEEE International Conference on Industrial Engineering and Engineering Management
Publications: conference_item
IEEE International Conference on Industrial Engineering and Engineering Management (IEEM)
Publications: conference_item
Gesellschaft für Arbeitswissenschaft
Publications: article

Publications: conference_item
5th North American Conference on Industrial Engineering and Operations Management
Publications: article

Publications: article

Publications: conference_item
MOSIM'18 - 12ème Conférence internationale de Modélisation, Optimisation et SIMulation : L’essor des systèmes connectes dans l’industrie et les services
Publications: conference_item
2018 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM)
Publications: conference_item
Comptes rendus du Troisième atelier de résolution de problèmes industriels de Montréal Une activité CRM-MITACS = Proceedings of the Third Montreal Industrial Problem Solving Workshop, CRM-MITACS
Publications: conference_item
Proceedings of the 2007 AERO Conference, Canadian Aeronautics and Space Institute (CASI)
Publications: conference_item
11th International Conference on Modeling, Optimization & Simulation (MOSIM 2016)
Publications: conference_item
38th International Annual Conference of the American Society for Engineering Management (ASEM 2017)
Publications: conference_item
2018 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM)
Publications: conference_item
Proceedings of the Industrial Engineering Research Conference, Miami, FL, May, 2009
Publications: thesis

Publications: conference_itemau

Publications: article

Publications: conference_item
11th International Conference on Modeling, Optimization & Simulation (MOSIM 2016)
Publications: conference_item
XI. üretim araştırmaları sempozyumu : "toplumsal kalkınmada üretimin artan rolü" : bildiriler, 23-24 Haziran 2011, İstanbul Ticaret Üniversitesi, Eminönü Yerleşkesi
Publications: conference_itemau

Publications: conference_itemau

Publications: conference_itemau

Publications: conference_itemau

Publications: conference_item
62nd Annual Conference and Expo of the Institute of Industrial Engineers 2012
Publications: conference_item
International Conference on Engineering, Science, and Industrial Applications (ICESI)
Publications: article

Publications: conference_item
International Annual Conference of the American Society for Engineering Management 201 (ASEM)
Publications: conference_item
XIX International Symposium on Air Breathing Engines (ISABE 2009). Montreal, Canada
Publications: article

Publications: conference_item
IIE Annual Conference and Expo 2010 Proceedings
Publications: conference_item
IIE Annual Conference and Expo 2008
Publications: conference_item
IIE Annual Conference and Expo 2011 Proceedings
Publications: article

Publications: article

Publications: conference_itemau

Publications: article

Courses and support services

Courses

MEC402 Production et fabrication industrielles (Winter 2022)
MEC402 Production et fabrication industrielles (Fall 2021)
MEC402 Production et fabrication industrielles (Summer 2021)

Assistance to students

Projet d'application à 15 crédits

    Modélisation d'un processus de gestion de risques intégré à un progiciel de gestion de projets et pratiques de mise en oeuvre d'un tel processus, by Voiron,Bastien.
    Fall 2019

    Co-directed by: Arteau, Jean
    Les sous-systèmes de liaison dans les systèmes d'arrêt de chute, by Caldas,Ligia Alexandra.
    Winter 2022

    Mise en place d’un modèle de maturité en gestion des installations., by Taba,Bernard.
    Fall 2019

    Co-directed by: Arteau, Jean
    Guide de sélection des sous-systèmes de liaison dans les systèmes d'arrêt de chute, by Fotso,Thierry Serge Rodrigue.
    Fall 2021

    Co-directed by: Arteau, Jean
    Élaboration d’un protocole expérimental pour l’étude du vieillissement des cordes tressées gainées utilisées dans les protections contre les chutes de hauteur, by Kamno Fogue,Isabelle.
    Fall 2020

    Co-directed by: Beauregard, Yvan
    Élaboration d'une grille pour la mesure de niveau de maturité de gestion de l'obsolescence en vue d'une performance industrielle, by Sablin,Niamkey Bédiha.
    Summer 2016

    Co-directed by: Beauregard, Yvan
    Étude de la configuration de sangles de harnais antichute et perception de confort pour femmes, by Patron Gomez,Heidy Esther.
    Summer 2017

    Modélisation et optimisation du plan d'introduction des nouveaux composants et du retrait des anciens composants en réduction de coût, by Ouadah,Lilya.
    Winter 2018

    Co-directed by: Beauregard, Yvan
    Risques ESS dans l'industrie de traitement du bois, by Hapau,Georgeta.
    Winter 2022

    Co-directed by: Arteau, Jean
    Base de données des harnais certifiés par CSA et développement d'un algorithme de sélection, by Rafiei,Raziyeh.
    Winter 2018

    La transformation vers le 4.0 et l'impact sur les concepts et les pratiques de gestion de projet, by Derdaki,Karima.
    Fall 2021

    Application de méthodes d'évaluation et de réduction des risques associés aux modes de transport, production et entreposage des matières résiduelles dangereuses dans l'industrie des composites, by Kibala,Muke.
    Winter 2019

Rapport technique à 6 crédits

    Co-directed by: Arteau, Jean
    Identification, évaluation et priorisation des risques en SST au Centre d'hébergement Émilie-Gamelin, by Jaimes Cabeza,Nydia Marcela.
    Fall 2019

    L'impact de l'industrie 4.0 dans l'usine de l'aciérie chez Rio Tinto, by Berrahma Chekroun,Mehdi.
    Summer 2021

    Étude de faisabilité sur l'implantation de solutions de livraison par drones au Québec, by Piette,Karl-André.
    Winter 2021

    « Bulding Information Modelling », revue littéraire, by Gaudreault,Marc.
    Summer 2019

    Étude de l'importance des indicateurs de performance sur les projets mobiles en phase de réalisation, by Maalaoui,Hamza.
    Fall 2016

    Co-directed by: Chénard, Louis
    Outil pour la fiabilité des systèmes à l'état de concepts avancés, by Tchatat Ndjanzoua,Landry.
    Fall 2017

    Co-directed by: Arteau, Jean
    Utilisation des capteurs de pression comme outil d’évaluation du confort pour les équipements de protection, by Ogoubly,Richard.
    Summer 2017

    Co-directed by: Arteau, Jean
    Systèmes d'arrêt de chute et zone de protection, by Ouertani,Samiha.
    Summer 2017

    Co-directed by: Beauregard, Yvan
    Critères biomécaniques pour déterminer la largeur des sangles de harnais, by Castillo Espitia,Johana.
    Winter 2017

    Étude sur l’importance des outils de gestion de projets pour mener à bien des projets de développement de logiciel dans un contexte d’entreprise en expansion, by Warin,Natacha.
    Summer 2021

    Le modèle d'un système de gestion de projets et de programmes axé sur la valeur, by Loginov,Oleg.
    Winter 2021

    Gestion du risque : évaluation des approches théoriques et outils existants - recommandations pour application dans un cas industriel, by Zekiri,Louiza.
    Winter 2019

    Co-directed by: Arteau, Jean
    Identification de l'état d'implantation de l'annexe 19 ¨Safety Management¨ de l'OACI dans les PME d'aéronautique au Québec et leur effet dans l'intégration de la gestion de SST, qualité et environnement, by Reyes Rubio,Laura Marcela.
    Fall 2018

    Co-directed by: Arteau, Jean
    Analyse et gestion des risques liés au métier de signaleur routier, by Poirier,Emmy.
    Fall 2020

    Gestion des risques de cybersécurité dans un contexte de bureau à la maison causé par la pandémie Covid-19, by Apaza Flores,Milagros.
    Winter 2022

    Comparaison des pratiques théoriques de gestion du risque dans les PME avec celles adoptées par les PME québécoises dans l'industrie Biomédicale, by Bachir Melhem,Lamice.
    Fall 2020

Stage industriel et rapport technique, 3 cr.

    Stage ingénieur industriel, by Portanguen,Thomas.
    Fall 2020

    Résumé du projet d'identification, d'évaluation et de priorisation des risques en SST au Centre d'hébergement Émilie-Gamelin, by Jaimes Cabeza,Nydia Marcela.
    Fall 2019

    Amélioration continue, by Tatchum Wabo,Thierry Landry.
    Fall 2021

    Stage en planification de travaux de maintenance électrique, by Berrahma Chekroun,Mehdi.
    Summer 2021

    Étude bibliographique de cas d'implantation de nouveaux logiciels de gestion qualité, by Audouin,Héloïse.
    Summer 2019

    Examiner l'application de la gestion du risque dans le contexte du poste de gestionnaire d'un site du REM, by Derdaki,Karima.
    Fall 2021

Mémoire à 30 crédits

    Exploring the impact of risk management maturity models for megaprojects (aerospace sector), by Homayounfard,Haniyeh.
    Winter 2022

    Co-directed by: Doré, Sylvie
    Conception d'un outil d'aide à la décision de technologies de fabrication additive en milieu aéronautique, by Buvat,Gaël.
    Winter 2016

    Co-directed by: Paquet, Marc
    Élaboration d'un plan de transition et de mise en oeuvre pour améliorer la gestion de l'obsolescence dans une entreprise du secteur aéronautique, by Conrad,Héloïse.
    Fall 2016

    Co-directed by: Paquet, Marc
    Conception d'un outil d'aide à la planification de changements d'ingénierie en milieu aéronautique, by Mougel,Léo.
    Winter 2017

    Implementation Barriers of Industry 4.0 with Lean Canada's Aerospace Manufacturing Companies, by Taghavi,Vahid.
    Winter 2022

    Pharmaceutical Supply Chain Risks and Risk Mitigation Strategies: Systematic Literature Review (SLR)through Text-Mining, by Mohebi,Elmira.
    Winter 2022

    Co-directed by: Bhuiyan, Nadia
    Nouvelle méthode d'identification de causes fondamentales et leçons apprises pour réduire les dépassements de coûts et de délais - mesure de la performance d'identification des risques, by Tran,Evelyne.
    Summer 2017

    Conception d'un processus amélioré de gestion du risque en développement produit, by Bonzel,Pierre.
    Fall 2017

    Co-directed by: Kenné, Jean-Pierre
    Conception et application d'une méthodologie multicritère floue de sélection de logiciels de planification et d'ordonnancement avancé (APS), by Ngamaleu Piengang,Fabrice Chilly.
    Summer 2018

    Implementing Self-Service Business Analytics in Support of Lean Manufacturing Initiatives, by Lizotte-Latendresse,Simon.
    Fall 2018

    Co-directed by: Bhuiyan, Nadia
    Data mining in aviation safety reports : Natural Language Processing, by Mohammadpour Sadigh,Homa.
    Summer 2019

    Design of incentive-based staff compensation methods in agile projects, by Khoshbin,Seyed Omid.
    Winter 2022

Stage industriel à 6 crédits

    L'assurance qualité chez Airbus Canada, by Gagneux,Pierre.
    Winter 2020

Projet en entreprise, 9 cr.

    Co-directed by: Euzeby, Vincent
    Expérimentation d’un tracteur à bagages autonome à l’aéroport de Toulouse-Blagnac, by Bartolucci-Caro,Maxence.
    Winter 2020

    Co-directed by: Tourville, Michel
    Application de méthodes de prévision de la demande dans un service de soutien aux pièces de rechange de l'industrie aéronautique, by Pillot,Guillaume.
    Summer 2019

    Co-directed by: Saint-Cyr, Corinne
    Développement et implantation de nouveaux processus et outils de gestion de projets chez Vapor Stone Rail Systems, by Sagnes,Lauriane.
    Summer 2015

    Co-directed by: de Sousa, Luis
    Délocalisation : stratégies et méthodes, by Piette,Karl-André.
    Winter 2021

    Co-directed by: Cherney, Maximilian
    Enjeux de la mortalité de l’abeille domestique Apis mellifera dans le monde – revue de littérature et gestion du risque, by Franchina,Arthur.
    Winter 2020

Thèse de doctorat (recherche appliquée)

    Co-directed by: Kenné, Jean-Pierre
    A Lean Model for Improving Predictive Maintenance Performance, by Mohammadi Tehrani,Mahdi.
    Fall 2021

    Co-directed by: Dao, Thien-My
    Développement et optimisation des stratégies de réponse à l’obsolescence via des modèles prédictifs, by Grichi,Yosra.
    Fall 2020

    Co-directed by: Paquet, Marc
    Modélisation et caractérisation des facteurs de l'obsolescence pour une performance accrue d'une chaîne logistique allégée, durable et résiliente, by Zaabar,Imen.
    Winter 2022

    A Critical Investigation of Risk Management Practices Influence on Pharmaceutical Supply Chain Performance, by Abu Zwaida,Tarek.
    Winter 2022

    Co-directed by: Bhuiyan, Nadia
    Approche intégrée pour l'estimation de l'effort et le contrôle du dépassement des coûts en développement de produits dans le secteur aérospatial, by Jaifer,Rabie.
    Fall 2020

    Investigation on Capability of the Cloud Manufacturing Concept for Improving the Utilities of Bio-inspired Production Systems in Global Supply Chains, by Asgari,Alireza.
    Summer 2021

    Artefact for Scheduling Operating Room by Considering Post Anesthesia Beds and Intensive Care Unit to Improve Efficiency During the COVID-19 Pandemic with Machine Learning, by Amrollahibiouki,Shahab.
    Winter 2022

    A Co-Creative Model Based on User-Generated Content and Decision-Making Environments to Identify New Product Ideas, by Azar Nasrabadi,Mohamadreza.
    Winter 2022

    Improved Risk and Uncertainty Management in Product Development, by Mohammadpour Sadigh,Mina.
    Winter 2022

    The Optimization of Machine Learning Algorithms Applied for Predictive Maintenance of Mechanical Bearings, by Banijamali,Seyed Masoud.
    Winter 2022

Projet d'application à 9 crédits

    Rapport de projet, by Ninin,Luca.
    Summer 2016

    Amélioration d'outils de simulation, d'analyse et de visualisation pour la conception avancée des systèmes d'avion, by Brassard,Frédérik.
    Summer 2019

    Co-directed by: Beaulac, Sébastien
    Réalisation d'un outil thermodynamique de prédiction de puissance d'antigivrage, by Harnais,Lionel.
    Summer 2017

Projet d'intervention en entreprise à 15 crédits

    Co-directed by: Boukri, Chahera
    Amélioration de la phase de pré-lancement de produit aéronautique par la cartographie de la phase de développement de design conceptuel, by Marlot,Quentin.
    Summer 2017

    Co-directed by: Hernandez, Yohann
    Développement d'un outil d'estimation des temps unitaires de production adaptées au domaine de l'enveloppe des bâtiments, by Franzoni,Arthur.
    Summer 2017

    Co-directed by: Forget, Francis
    Jumeau numérique d’une usine de production industrielle, by Oublié,Anne-Claire.
    Fall 2021

    Co-directed by: Forget, Francis
    Application d'une méthode de sélection d'un logiciel de simulation dans un cas d'étude MRO, by Piveteau,Benoit.
    Winter 2019

    Co-directed by: Forget, Francis
    Diminution du temps de cycle dans un centre de production et de réparation de turbines à gaz aéro-dérivées, by Jannin,Benjamin.
    Winter 2019

    Centralisation des données et développement de rapports automatisés facilitant la reddition du portefeuille de projets., by El Khoury,Zeidan.
    Winter 2022

    Co-directed by: Bertuzzo, Mathilde
    Analyse de la pratique du Lean dans l’amélioration continue des performances des lignes de production de General Electric Renewable Energy, by Guittard,Francois.
    Winter 2021

Publications
Peer-reviewed article published in a refereed journal (20)

Rabie Jaifer, Yvan Beauregard, Nadia Bhuiyan. 2021. « New framework for effort and time drivers in aerospace product development projects ». EMJ - Engineering Management Journal. vol. 33 , nº 2. p. 76-95.

Tarek Abu Zwaida, Khalil Elaroudi, Yvan Beauregard. 2021. « The challenges of drug shortages in the Canadian hospital pharmacy supply chain : A systematic literature review ». Journal of Public Health (Germany). 12 p. (In press)

Alireza Asgari, Muke Kibala, Yvan Beauregard. 2021. « A framework for the risk assessment of residual hazardous material in the dynamic environment of a composite production process considering operational time variation ». Process Safety Progress. vol. 40 , nº 1. 9 p.

Mahdi Mohammadi Tehrani, Mohammadsadegh Mobin, Yvan Beauregard, Michel Rioux, Jean Pierre Kenné. 2021. « Multi-scenario and multi-criteria approach to evaluate prediction techniques used to recognise failure patterns ». International Journal of Applied Decision Sciences (IJADS). vol. 14 , nº 4. p. 361-386.

Imen Zaabar, Raul Arango-Miranda, Yvan Beauregard, Marc Paquet. 2021. « A sustainable multicriteria decision framework for obsolescence resolution strategy selection ». Sustainability. vol. 13 , nº 15.

Tarek Abu Zwaida, Chuan Pham, Yvan Beauregard. 2021. « Optimization of inventory management to prevent drug shortages in the hospital supply chain ». Applied Sciences. vol. 11 , nº 6.

Yosra Grichi, Yvan Beauregard, Thien-My Dao. 2019. « An approach to obsolescence forecasting based on Hidden Markov Model and Compound Poisson Process ». International Journal of Industrial Engineering and Operations Management (IJIEOM). vol. 1 , nº 2. p. 111-124.

Hesham F. Maghrabie, Yvan Beauregard, Andrea Schiffauerova. 2019. « Multi-criteria decision making problems with unknown weight information under uncertain evaluations ». Computers & Industrial Engineering. vol. 133 p. 131-138.

Hesham Maghrabie, Yvan Beauregard, Andrea Schiffauerova. 2019. « Grey-based multi-criteria decision analysis approach: addressing uncertainty at complex decision problems ». Technological Forecasting and Social Change. vol. 146 p. 366-379.

Fabrice Chilly Ngamaleu Piengang, Yvan Beauregard, Jean-Pierre Kenné. 2019. « An APS software selection methodology integrating experts and decisions-maker’s opinions on selection criteria: a case study ». Cogent Engineering. vol. 6 , nº 1.

Vladimir Polotski, Yvan Beauregard, Arthur Franzoni. 2019. « Combining predetermined and measured assembly time techniques: Parameter estimation, regression and case study of fenestration industry ». International Journal of Production Research. vol. 57 , nº 17. p. 5499-5519.

Yosra Grichi, Yvan Beauregard, Thien-My Dao. 2018. « Optimization of obsolescence forecasting using new hybrid approach based on the RF method and the meta-heuristic genetic algorithm ». American Journal of Management. vol. 18 , nº 2. p. 27-38.

Simon Lizotte-Latendresse, Yvan Beauregard. 2018. « Implementing self-service business analytics supporting lean manufacturing: A state-of-the-art review ». IFAC-PapersOnLine. vol. 51 , nº 11. p. 1143-1148.

Vladimir Polotski, Yvan Beauregard. 2018. « Work-time identification and effort assessment: Application to fenestration industry and case study? ». IFAC-PapersOnLine. vol. 51 , nº 15. p. 569-574.

Gagandeep Singh, Leo Mougel, Yvan Beauregard, Yaoyao Fiona Zhao. 2017. « Towards optimal engineering multitasking level through stochastic modelling ». International Journal of Operational Research. vol. 28 , nº 2. p. 263-278.

Yvan Beauregard, Vladimir Polotski, Nadia Bhuiyan, Vincent Thomson. 2017. « Optimal utilisation level for lean product development in a multitasking context ». International Journal of Production Research. vol. 55 , nº 3. p. 795-818.

Mahdi Mohammadi Tehrani, Yvan Beauregard, Michel Rioux, Jean Pierre Kenne, Rejean Ouellet. 2015. « A predictive preference model for maintenance of a heating ventilating and air conditioning system ». IFAC-PapersOnLine. vol. 48 , nº 3. p. 130-135.

Yvan Beauregard, Nadia Bhuiyan, Vince Thomson. 2014. « Lean engineering performance analysis ». International Journal of Product Development. vol. 19 , nº 5/6. p. 366-387.

Yvan Beauregard, Nadia Bhuiyan, Vincent Thomson. 2011. « Post-certification engineering taxonomy and task value optimization in the aerospace industry  ». Engineering Management Journal. vol. 23 , nº 1. p. 86-100.

Yvan Beauregard, Vincent Thomson, Nadia Bhuiyan. 2008. « Lean engineering logistics: load leveling of design jobs with capacity considerations ». Canadian Aeronautics and Space Journal = Journal Aéronautique et Spatial du Canada. vol. 54 , nº 2. p. 19-30.

Conference proceeding (36)

Shahab Amrollahibiouki, Yvan Beauregard. 2021. « Operating room scheduling by considering surgical inventory, post anesthesia beds, and emergency surgeries to improve efficiency during the COVID-19 outbreak with machine learning ». Proceedings of the 11th Annual International Conference on Industrial Engineering and Operations Management (Singapore, Singapore, March 07-11, 2021) p. 2264-2276. IEOM Society International.

Yosra Grichi, Héloïse Conrad, Yvan Beauregard, Marc Paquet, Thien My Dao. 2020. « Evaluation of factors driving avionic system obsolescence to enhance forecasting : a case study ». Proceedings of the 2016 Industrial and Systems Engineering Research Conference, ISERC 2016 (Anaheim, CA, USA, May 21-24, 2016) p. 346-351. Institute of Industrial Engineers.

Elmira Mohebi, Yvan Beauregard. 2020. « Identifying the substantial Big Data (BD) aspects to improve product engineering design ». 10th Annual International Conference on Industrial Engineering and Operations Management (Dubai, United Arab Emirates (UAE), Mar. 10-12, 2020) p. 1408-1417. IEOM Society.

Mohamadreza Azar Nasrabadi, Yvan Beauregard. 2020. « Study on the effect of user-generated content in social media on the process of product development: How to make user-generated content into a new product concept ». 5th North American Conference on Industrial Engineering and Operations Management (Detroit, MI, USA, Aug. 10-14, 2020) p. 1087-1098. IEOM Society.

Vahid Taghavi, Yvan Beauregard. 2020. « The relationship between lean and industry 4.0: Literature review ». 5th North American Conference on Industrial Engineering and Operations Management (Detroit, MI, USA, Aug. 10-14, 2020) p. 808-820. IEOM Society.

A. Sylla, R. Ayachi, M. Aldanondo, E. Vareilles, Y. Beauregard, P. Pitiot. 2019. « Towards a metric between engineering to order and assemble/make to order products in configuration situations ». IEEE International Conference on Industrial Engineering and Engineering Management (Macao, China, Dec. 15-18, 2019) p. 379-383. IEEE.

Tarek Abu Zwaida, Yvan Beauregard, Khalil Elarroudi. 2019. « Comprehensive literature review about drug shortages in the canadian hospital's pharmacy supply chain ». International Conference on Engineering, Science, and Industrial Applications (ICESI) (Tokyo, Japan, Aug. 22-24, 2019) Institute of Electrical and Electronics Engineers Inc..

Yosra Grichi, Thien-My Dao, Yvan Beauregard. 2018. « A new approach for optimal obsolescence forecasting based on the random forest (RF) technique and meta-heuristic particle swarm optimization (PSO) ». Proceedings of the International Conference on Industrial Engineering and Operations Management (Paris, France, July 26-27, 2018) p. 1680-1688. IOM Society International.

Jean Arteau, Heidy Esther Patron Gomez, Yvan Beauregard. 2018. « Anthropometry and selection of full body harness: beyond stature and body mass as selection criteria ». Gesellschaft für Arbeitswissenschaft (Francfort, Allemagne, Fev. 21-23, 2018) GFA Press.

R. Ayachi, D. Guillon, F. Marmier, É. Vareilles, M. Aldanondo, T. Coudert, L. Geneste, Y. Beauregard. 2018. « Elaboration d'offres en relation client-fournisseur : vers une exploitation des connaissances pour l'ingénierie des risques ». MOSIM'18 - 12ème Conférence internationale de Modélisation, Optimisation et SIMulation : L’essor des systèmes connectes dans l’industrie et les services (Toulouse, France, June 27-29, 2018) p. 229-236. IMT Mines Albi.

R. Ayachi, D. Guillon, F. Marmier, E. Vareilles, M. Aldanondo, T. Coudert, L. Geneste, Y. Beauregard. 2018. « Towards a knowledge based support for risk engineering when elaborating offer in response to a customer demand ». 2018 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (Bangkok, Thailand, Dec. 16-19, 2018) p. 1056-1060. Piscataway, NJ, USA : IEEE.

I. Zaabar, Y. Beauregard, M. Paquet. 2018. « Using multicriteria decision making methods to manage systems obsolescence ». 2018 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (Bangkok, Thailand, Dec. 16-19, 2018) p. 803-807. IEEE.

Pierre Bonzel, Yvan Beauregard. 2017. « Identification of risk factors and influences on aeronautical product development performance ». 38th International Annual Conference of the American Society for Engineering Management (ASEM 2017) (Huntsville, AL, USA, Oct. 18-21, 2017) p. 644-653. ASEM.

Y. Grichi, Y. Beauregard, T. M. Dao. 2017. « A random forest method for obsolescence forecasting ». IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (Singapore, Singapore, Dec. 10-13, 2017) p. 1602-1606. IEEE.

Yosra Grichi, Yvan Beauregard, Thien-My Dao, Imen Zaabar. 2017. « Obsolescence forecasting strategy of technological components - A comparative study of algorithms ». 7th International Conference on Industrial Engineering and Systems Management (IESM 2017) (Saarbrücken, Germany, Oct. 11-13, 2017) p. 57-62. Saarland University of Applied Sciences.

Rabie Jaifer, Yvan Beauregard, Nadia Bhuiyan. 2017. « Reimagining uncertainty and complexity evaluation in aerospace new product development-time and cost planning perspective ». 38th International Annual Conference of the American Society for Engineering Management (ASEM 2017) (Huntsville, AL, USA, Oct. 18-21, 2017) p. 815-824. ASEM.

Fabrice Chilly Ngamaleu Piengang, Yvan Beauregard, Jean-Pierre Kenné. 2017. « Introduction to optimization of decision-making in coupled, dynamic and uncertain production, maintenance and product development environment ». 38th International Annual Conference of the American Society for Engineering Management (ASEM 2017) (Huntsville, AL, USA, Oct. 18-21, 2017) p. 210-220. ASEM.

Abdourahim Sylla, Elise Vareilles, Thierry Coudert, Michel Aldanondo, Laurent Geneste, Yvan Beauregard. 2017. « ETO bid solutions definition and selection using configuration models and a multi-criteria approach ». IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (Singapore, Dec. 10-13, 2017) p. 1833-1837. Piscataway, NJ, USA : IEEE.

I. Zaabar, Y. Beauregard, M. Paquet. 2017. « Evaluation and validation of a maturity model in obsolescence management for increased performances ». 38th International Annual Conference of the American Society for Engineering Management (ASEM 2017) (Huntsville, AL, USA, Oct. 18-21, 2017) p. 701-707. ASEM.

Pierre Bonzel, Yvan Beauregard. 2016. « Influence de la gestion du risque dans le processus de développement produit en aéronautique ». 11ème Conférence Francophone de Modélisation, Optimisation et Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

Rabie Jaifer, Yvan Beauregard, Nadia Bhuiyan. 2016. « Revue littérature sur la gestion de performances en développement de produits : cas de l’industrie aéronautique ». 11th International Conference on Modeling, Optimization & Simulation (MOSIM 2016) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

Hesham Maghrabie, Yvan Beauregard, Andrea Schiffauerova. 2016. « The use of grey systems theory in complex decision problems under uncertainty ». 11ème Conférence Francophone de Modélisation, Optimisation et Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

Tarek Abu Zwaida, Yvan Beauregard. 2016. « Product development and improvement ». 11th International Conference on Modeling, Optimization & Simulation (MOSIM 2016) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

Evelyne Tran, Yvan Beauregard, Nadia Bhuiyan. 2016. « Le lean en développement de produits appliquée à la gestion du changement d'ingénierie ». 11th International Conference on Modeling, Optimization & Simulation (MOSIM 2016) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

Imen Zaabar, Yvan Beauregard, Marc Paquet. 2016. « The impact of parts obsolescence on organization’s performances: a case study in the aeronautic industry ». 11th International Conference on Modeling, Optimization & Simulation (MOSIM 2016) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

Nguyen Hoa Ngan, Yvan Beauregard. 2015. « Analysis of the stress in thread fastener by finite elements to predict the contact damage ». 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference (Montreal, QC, Canada, May 19-21, 2015) Canadian Aeronautics and Space Institute.

Yvan Beauregard. 2015. « Surprises and cost overruns: a lean risk management approach to reduce surprises and address cost overruns in aerospace product development projects ». International Annual Conference of the American Society for Engineering Management 201 (ASEM) (Indianapolis, IN, USA, Oct. 7-10, 2015) p. 249-254. American Society for Engineering Management.

Xiaoqi Zhang, Vincent Thomson, Yvan Beauregard. 2012. « Determining the value of engineering tasks ». 62nd Annual Conference and Expo of the Institute of Industrial Engineers 2012 (Orlando, FL, USA, May 19-23, 2012) p. 732-740. Norcross, GA, USA : Institute of Industrial Engineers.

Xiaoqi Zhang, Vince Thomson, Yvan Beauregard, Akif A. Bulgak. 2011. « Determining the value of engineering jobs in an aerospacecompany ». XI. üretim araştırmaları sempozyumu : "toplumsal kalkınmada üretimin artan rolü" : bildiriler, 23-24 Haziran 2011, İstanbul Ticaret Üniversitesi, Eminönü Yerleşkesi (Istanbul, Turkey, Nov. 23-24, 2011) p. 853-858. İstanbul Ticaret Üniversitesi.

Yvan Beauregard, Nadia Bhuiyan, Vincent Thomson. 2011. « Optimum task size, multitasking and utilization levels for lean product development ». IIE Annual Conference and Expo 2011 Proceedings (Reno, NV, USA, May 21-25, 2011) Norcross, GA, USA : Institute of Industrial Engineers.

Yvan Beauregard, Nadia Bhuiyan, Adil Salam, Vincent Thomson. 2010. « Lean engineering post certification in the aerospace industry: resource allocation decision making and product development performance benchmarking ». XIX International Symposium on Air Breathing Engines (ISABE 2009). Montreal, Canada (Montreal, QC, Canada, Sept. 7-11, 2009) p. 1791-1801. Curran Associates, Inc..

Yvan Beauregard, Nadia Bhuiyan, Vincent Thomson. 2010. « Engineering task management policies influence on product development performance ». IIE Annual Conference and Expo 2010 Proceedings (Cancun, Mexico, June 5-9, 2010) Norcross, GA, USA : Institute of Industrial Engineers.

Pierre Baptiste, Robert Pellerin, Yvan Beauregard, Mohammed A. Qazi, Admène Hajji, Mohammad Yousef Maknoon, Benoît Saenz de Ugarte, Javad Sadr. 2009. « Realized value optimization in product development post-certification ». Comptes rendus du Troisième atelier de résolution de problèmes industriels de Montréal Une activité CRM-MITACS = Proceedings of the Third Montreal Industrial Problem Solving Workshop, CRM-MITACS (Montreal, QC, Canada, Aug. 17–21, 2009) p. 5-15. Montreal, QC, Canada : Centre de recherches mathématiques, Université de Montréal..

Y. Beauregard, V. Thomson, N. Bhuiyan. 2009. « Post-certification engineering taxonomy and decision making optimization in the aerospace industry ». Proceedings of the Industrial Engineering Research Conference, Miami, FL, May, 2009 (Miami, FL, USA, May 30-Jun 3, 2009) Norcross, GA, USA : Institute of Industrial Engineers.

Yvan Beauregard, Nadia Bhuiyan, Vincent Thomson. 2008. « Lean engineering systems for product development in the aerospace industry ». IIE Annual Conference and Expo 2008 (Vancouver, BC, Canada, May 17-21, 2008) p. 1515-1520. Norcross, GA, USA : Institute of Industrial Engineers.

Y. Beauregard, V. Thomson, N. Bhuiyan. 2007. « Lean engineering in product development ». Proceedings of the 2007 AERO Conference, Canadian Aeronautics and Space Institute (CASI) (Toronto, ON, Canada, Apr. 25-26, 2007) Kanata, ON, Canada : Canadian Aeronautics and Space Institute.

Communication (9)

G. Buvat, Y. Beauregard, S. Doré. 2015. « Process modeling and simulation ». Communication during a conference : 2nd Canadian Aeronautics and Space Institute (CASI) Aerospace Manufacturing Technologies Symposium ( Montreal, QC, Canada, May 19-21, 2015 )

Yvan Beauregard. 2015. « Surprises and cost overrun: A lean risk management approach to reduce surprises and address cost overruns in aerospace product development projects ». Communication during a conference : International Annual Conference of the American Society for Engineering Management 2015 (ASEM 2015) ( Indianapolis, IN, USA, Oct. 7-10, 2015 )

Yvan Beauregard, Vincent Thomson, Nadia Bhuiyan. 2011. « Optimum task size, multitasking and utilization levels for lean product development ». Communication during a conference : IIE Annual Conference and Expo 2011 ( Reno, NV, USA, May 21-25, 2011 )

Yvan Beauregard, Vincent Thomson, Nadia Bhuiyan. 2010. « Engineering task management policies influence on product development performance ». Communication during a conference : IIE Annual Conference and Expo 2010 ( Cancun, Mexico, June 5-9, 2010 )

Yvan Beauregard. 2009. « Lean engineering post certification in the aerospace industry: resource allocation decision making and product development performance benchmarking ». Communication during a conference : XIX International Symposium on Air Breathing Engines (ISABE 2009). Montreal, Canada ( Montreal, QC, Canada, Sept. 7-11, 2009 )

Yvan Beauregard. 2009. « P&WC lean engineering overview ». Communication during a conference : 2009 ITESM ( Monterrey, Mexico, 2009 )

Yvan Beauregard. 2009. « Post-certification engineering taxonomy and decision making optimization in the aerospace industry: a multi-criteria performance study of lean engineering ». Communication during a conference : 2009 Industrial Engineering Research Conference, IIE Annual Conference and Expo ( Miami, FL, USA, May 30-Jun 3, 2009 )

Yvan Beauregard. 2008. « Lean engineering systems for product development in the aerospace industry ». Communication during a conference : IIE Annual Conference and Expo 2008 : May 17-21, Westin Bayshore, Vancouver, British Columbia, Canada : how businesses take flight ( Vancouver, BC, Canada, May 17-21, 2008 )

Yvan Beauregard, R. Zielinski, V. Thomson. 2007. « Lean strategy to win: evaluating alternatives in fuzzy front end product development ». Communication during a conference : 2007 AERO Conference, Canadian Aeronautics and Space Institute (CASI) ( Toronto, ON, Canada, Apr. 25-26, 2007 )

Poster (1)

H. C. Imen zaabar, Léo Mougel, Niamkey Sablin, Yosra Grichi, Yvan Beauregard, T. M. Dao, M. Paquet. 2015. « Dynamic forecasting of avionics obsolescence to enhance sustainability ». Poster presented during a conference : Sustainability 2015 : An International Conference on Environmental Sustainability in Air Vehicle Design and Operations of Helicopters and Airplanes (AHS 2015) ( Montreal, QC, Canada, Sept. 22-24, 2015 )

Dissertation or these (1)

Yvan Beauregard. 2010. « A multi-criteria performance study of lean engineering ». 224 p. Thèse de doctorat. Montréal , Concordia University

Awards and honors