Tan Pham

• Projet d'application sur le développement d'un dispositif d'étude de la tension superficielle de métaux à l'état liquide, by Dessert,Nicolas.
  Fall 2020
  
• Co-directed by: Lebrun, Gilbert
  Modélisation de la mise en forme des matériaux composites thermoplastiques à renforts fibreux, by Kouwonou,Kodjo Dodji.
  Fall 2015
  
• Analyse thermomécanique par éléments finis du soudage de l'aluminium 6061-T6, by Laftouhi,Khalil.
  Summer 2017
  
• Incertitude de la trajectoire d'un joint de soudure robotisée, by Hudon,Benjamin.
  Summer 2023
  
• Développement d'un outil de conception 3d paramétrique, by Nantchouang Tsanang,Joël.
  Fall 2023
  

• Co-directed by: Fihey, Jean-Luc
  Étude expérimentale assistée par simulation numérique du formage par ligne de chauffe de l'acier inoxydable austénitique AISI 304L, by Pradinc,Guillaume.
  Summer 2013
  
• Numerical Simulation of Forming of Thermoplastic Composites PPS / Carbon Fiber, by Nguyen,Hong Den.
  Summer 2015
  
• Co-directed by: Pham, Tan
  Optimisation par éléments finis des trajectoires de chauffage par induction pour un traitement thermique robotisé in situ, by Gendron,Mathieu.
  Summer 2013
  
• Co-directed by: Pham, Tan
  Conception d'une structure soudée pour l'actionnement de vannes de pipelines automatisées, by Michaud,Hughes.
  Winter 2017
  
• Characterization of Microstructure and Mechanical Behaviour of Heat Affected Zones in Robotic Arc Welding of AA6061-T6, by Arhumah,Zeli Atia Salem.
  Winter 2019
  
• Co-directed by: D'Amours, Guillaume
  Characterization and Simulation of AA7075 Hot Stamping with Subsequent Die Quenching for Automotive Structural Applications, by Thériault,Benoit.
  Summer 2018
  
• Development of Parameters of GMAW-P for the Wire and Arc Additive Manufacturing (WAAM) of Aluminum Alloys, by Gharagozloo,Mehdi.
  Summer 2020
  
• Co-directed by: Godin, Stéphane
  Étude du rechargement hétérogène avant et après martelage de l'acier E2209 déposé sur l'acier S41500, by Hudon,Jean-Benoit.
  Fall 2019
  
• Simulation numérique d'une source de chaleur mobile par la méthode Element-Free Galerkin, by Champagne,Olivier.
  Winter 2020
  

• Co-directed by: Pham, Tan
  Dimensional Metrology of Non-rigid Parts without Specialized Inspection Fixtures, by Sabri,Vahid.
  Fall 2016
  
• Co-directed by: Cao, Xinjin
  Hybrid/tandem Laser-arc Welding of Thick Low Carbon Martensitic Stainless Steel Plates, by Mirakhorli,Fatemeh.
  Fall 2016
  
• Co-directed by: labbé, Paul
  Numerical Analysis of Convective Cooling in Hydro Generators, by Dang,Dinh Dong.
  Summer 2018
  
• Co-directed by: Pham, Tan
  Modélisation électro-magnéto-thermique et optimisation des paramètres de chauffe d'un nouveau système de traitement thermique par induction robotisé, by Gendron,Mathieu.
  Fall 2017
  
• Co-directed by: François, Vincent
  Études sur le comportement des pièces non rigides en matériaux composites renforcés de fibres à l'assemblage, by Vu,Ngoc Hung.
  Fall 2019
  
• Co-directed by: Pham, Tan
  Experimental and Numerical Investigation of Temperature Evolution During Super Plastic Forming of an Aluminum Alloy Sheet and its Influence on Distortion, by Aleyari,Alireza.
  Fall 2020
  
• Co-directed by: Dao, Thien-My
  Welded Aluminum Alloy Material Mechanical Behavior under High Temperature Condition, by Alkhabbat,Mohammed.
  Fall 2023
  
• Nano-Treating and its Effect on Improving the Weldability of 7075 Aluminium Alloy, by Gharagozloo,Mehdi.
  Fall 2023
  
• Numerical Study of Laser Parameters on the Instability of the Keyhole during Keyhole Mode Laser Welding, by Saediardahaei,Saeid.
  Fall 2023
  
• Co-directed by: Lanteigne, Jacques
  Finite Element Modeling of the Propagation of Cracks in a Turbine Wheel Through a Residual Stress Field, by Bab Nadi,Reza.
  Fall 2023
  
• Evaluation and Prediction of Welding Beads by using Intelligent Vision Sensing in Robotic Welding System, by Dinh,Nhat Huy.
  Fall 2023
  

• Implantation de la norme CSA W47.2 et certification CWB d'une entreprise oeuvrant dans le domaine du forage de pieux, de la modification et de l'entretien d'équipement lourd, by Grenier,Jason.
  Summer 2013
  

• Stage de maîtrise, by Laftouhi,Khalil.
  Summer 2017
  

• Définir et optimiser des outils de calcul de structure standardisés, by Froeliger,Jules.
  Fall 2022
  

• Co-directed by: Essiambre, Benoit
  Conception d'un dissipateur de chaleur pour des luminaires LED, by Loayza Aramayo,Aldo.
  Winter 2021
  

Alireza Aleyari, Omid Majidi, Nicolas Bombardier, Xuan-Tan Pham, Mohammad Jahazi. 2020. « Finite element and experimental analysis of the preheating stage of High Speed Blow Forming (HSBF) process ». Journal of Manufacturing Processes. vol. 49 p. 10-17.

Olivier Champagne, Xuan-Tan Pham. 2020. « Numerical simulation of moving heat source in arc welding using the Element-free Galerkin method with experimental validation and numerical study ». International Journal of Heat and Mass Transfer. vol. 154 8 p.

Dinh-Dong Dang, Xuan-Tan Pham, Chi-Cong Nguyen. 2020. « Thermal performance prediction in the air gap of a rotor-stator configuration: effects of numerical models ». Journal of Thermal Science and Engineering Applications. vol. 29 , nº 1. p. 206-218.

Mathieu Gendron, Bruce Hazel, Eric Boudreault, Henri Champliaud, Xuan-Tan Pham. 2019. « Coupled thermo-electromagnetic model of a new robotic high-frequency local induction heat treatment system for large steel components ». Applied Thermal Engineering. vol. 150 p. 372-385.

Ngoc-Hung Vu, Xuan-Tan Pham, Vincent Francois, Jean-Christophe Cuillière. 2019. « Characterization of multilayered carbon-fiber-reinforced thermoplastic composites for assembly process ». Journal of Thermoplastic Composite Materials. vol. 32 , nº 5. p. 673-689.

Ngoc-Hung Vu, Xuan-Tan Pham, Vincent François, Jean-Christophe Cuillière. 2019. « Inverse procedure for mechanical characterization of multi-layered non-rigid composite parts with applications to the assembly process ». Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. vol. 233 , nº 17. p. 6167-6176.

D. D. Dang, X. T. Pham, P. Labbe, F. Torriano, J. F. Morissette, C. Hudon. 2018. « CFD analysis of turbulent convective heat transfer in a hydro-generator rotor-stator system ». Applied Thermal Engineering. vol. 130 p. 17-28.

Mathieu Gendron, Bruce Hazel, Eric Boudreault, Henri Champliaud, Xuan-Tan Pham. 2017. « Modeling circular inductors coupled to a semi-infinite magnetic medium considering the proximity effect ». Journal of Electromagnetic Waves and Applications. vol. 31 , nº 13. 23 p. p. 1232-1254.

F. Mirakhorli, X. Cao, X. T. Pham, P. Wanjara, J. L. Fihey. 2017. « Phase structures and morphologies of tempered CA6NM stainless steel welded by hybrid laser-arc process ». Materials Characterization. vol. 123 p. 264-274.

V. Sabri, S. Sattarpanah, S. A. Tahan, J. C. Cuillière, V. François, X. T. Pham. 2017. « A robust and automated FE-based method for fixtureless dimensional metrology of non-rigid parts using an improved numerical inspection fixture ». International Journal of Advanced Manufacturing Technology. vol. 92 , nº 5-8. p. 2411-2423.

Mathieu Gendron, Éric Boudreault, Bruce Hazel, Xuan-Tan Pham, Henri Champliaud. 2016. « Non-linear optimization of a new robotic induction process for local heat treatment using thermal finite element analysis ». International Journal of Advanced Manufacturing Technology. vol. 84 , nº 5. p. 1013-1029.

Fatemeh Mirakhorli, Xinjin Cao, Xuan-Tan Pham, Priti Wanjara, Jean-Luc Fihey. 2016. « Hybrid laser-arc welding of 10-mm-thick cast martensitic stainless steel CA6NM: as-welded microstructure and mechanical properties ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. vol. 47 , nº 7. 19 p. p. 3545-3563.

Fatemeh Mirakhorli, Xinjin Cao, Xuan-Tan Pham, Priti Wanjara, Jean-Luc Fihey. 2016. « Post-weld tempered microstructure and mechanical properties of hybrid laser-arc welded cast martensitic stainless steel CA6NM ». Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. vol. 47 , nº 6. p. 3245-3256.

V. Sabri, S. A. Tahan, X. T. Pham, D. Moreau, S. Galibois. 2016. « Fixtureless profile inspection of non-rigid parts using the numerical inspection fixture with improved definition of displacement boundary conditions ». International Journal of Advanced Manufacturing Technology. vol. 82 , nº 5-8. p. 1343-1352.

Hugues Lessard, Gilbert Lebrun, Abdelhaq Benkaddour, Xuan-Tan Pham. 2015. « Influence of process parameters on the thermostamping of a [0/90]12 carbon/polyether ether ketone laminate ». Composites Part A: Applied Science and Manufacturing. vol. 70 p. 59-68.

R. Keivani, Mohammad Jahazi, Tan Pham, A. R. Khodabandeh, M. R. Afshar. 2014. « Predicting residual stresses and distortion during multisequence welding of large size structures using FEM ». International Journal of Advanced Manufacturing Technology. vol. 73 , nº 1-4. p. 409-419.

Phuong Nguyen-Tri, Rachid El Aidani, Étienne Leborgne, Tan Pham, Toan Vu-Khanh. 2014. « Chemical ageingaging of a polyester nonwoven membrane used in aerosol and drainage filter ». Polymer Degradation and Stability. vol. 101 , nº 1. p. 71-80.

Quang Hien Bui, Xuan Tan Pham, Mario Fafard. 2013. « Modelling of microstructure effects on the mechanical behavior of aluminium tubes drawn with different reduction areas ». International Journal of Plasticity. vol. 50 p. 127-145.

Xuan-Tan Pham. 2013. « Two-dimensional rosenthal moving heat source analysis using the meshless element free Galerkin method ». Numerical Heat Transfer; Part A: Applications. vol. 63 , nº 11. p. 807-823.

Q. H. Bui, Tan Pham. 2011. « Modeling of microstructure effects on the mechanical behavior of ultrafine-grained nickels processed by hot isostatic pressing ». International Journal of Mechanical Sciences. vol. 53 , nº 10. p. 812-826.

Xuan-Tan Pham, Phil Bates, Amy Chesney. 2005. « Modeling of thermoforming of low-density glass mat thermoplastic ». Journal of Reinforced Plastics and Composites. vol. 24 , nº 3. p. 287-298.

Ngoc-Hung Vu, Xuan-Tan Pham, Vincent François, Jean-Christophe Cuillière. 2019-05-01. « Behavior Characterization of Large Dimension Composite Plate ». Substance ÉTS. vol.

Ngoc-Hung Vu, Xuan-Tan Pham, Vincent François, Jean-Christophe Cuillière. 2019-05-01. « Caractérisation du comportement d’une plaque composite de grande dimension ». Substance ÉTS. vol.

Z. Arhumah, M. Alkhabbat, X-T. Pham. 2018. « Heat effect on mechanical properties and microstructure of aluminum welding ». Poster presented during a conference : REGAL student’s day ( Montreal, QC, Canada, June 18-19, 2018 )

H.-C. Nguyen, X-T. Pham, M. Jahazi. 2018. « Implementing phase-field ductile fracture model for aluminum welded joint ». Poster presented during a conference : REGAL student’s day ( Montreal, QC, Canada, June 18-19, 2018 )

T.-N. Tran, C.-C. Nguyen, X.-T. Pham. 2018. « Multi-physics modeling of aluminium laser welding process ». Poster presented during a conference : REGAL student’s day ( Montreal, QC, Canada, June 18-19, 2018 )

M. Gharagozloo, X-T. Pham, C-C Nguyen. 2018. « Feasibility study of aluminium deposition by robotic MIG welding process ». CanWeld Conference 2018 (Winnipeg, MB, Canada, Sept. 12-13, 2018)

F. Mirakhorli, X. Cao, X. T. Pham, P. Wanjara, J. L. Fihey. 2017. « Technical challenges in narrow-gap root pass welding during tandem and hybrid laser-arc welding of a thick martensitic stainless steel ». International conference on processing and manufacturing of advanced materials (THERMEC) (Graz, Austria, May 29-June 03, 2016) p. 1305-1310. Trans Tech Publications.

Ngoc-Hung Vu, Vincent François, Jean-Christophe Cuillière, Xuan-Tan Pham. 2017. « Development of finite strain shell elements for multi-layered fiber-reinforced materials applied for non-rigid parts deformation during assembly process ». Design, Manufacturing and Applications of Composites : Proceedings of the Eleventh Joint Canada-Japan Workshop on Composites and the First Joint Canada-Japan-Vietnam Workshop on Composites August 2016, Ho Chi Minh, Vietnam (Ho Chi Minh, Vietnam, Aug. 08-12, 2016) p. 96-103. DEStech publications.

D-D. Dang, X. T. Pham. 2015. « Numerical analysis of turbulent convective heat transfer in a rotor-stator configuration ». 23rd Annual Conference of the Computational Fluid Dynamics Society of Canada (CFDSC 2015) (Waterloo, ON, Canada, June 7-12, 2015)

Fatemeh Mirakhorli, Xinjin Cao, Xuan Tan Pham, Priti Wanjara, Jean-Luc Fihey. 2015. « Hybrid laser-arc welding of cast martensitic stainless steel CA6NM: Post-weld tempered microstructure and mechanical properties ». Conference of metallurgists (COM 2015) (Toronto, ON, Canada, Aug. 23-26, 2015)

Hong-Den Nguyen, Martin Deshaies, Xuan-Tan Pham. 2015. « Simulation-assisted mold design for forming of thermoplastic PPS/ carbon fiber composites ». 62nd CASI Aeronautics Conference (Montreal, QC, Canada, May 18-21, 2015)

F. Mirakhorli, X. Cao, Tan Pham, P. Wanjara, Jean-Luc Fihey. 2014. « Hybrid fiber laser-arc welding of 10-mm thick CA6NM stainless steel ». Materials Science and Technology Conference and Exhibition 2014, MS and T 2014 (Pittsburgh, PA, USA, Oct. 12-16, 2014) p. 1891-1900. Association for Iron and Steel Technology, AISTECH.

Mathieu Gendron, Eric Boudreault, Bruce Hazel, Henri Champliaud, Tan Pham. 2013. « Temperature profile optimization in a new robotic local induction heat treatment process ». Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 (Montreal, QC, Canada, Oct. 27-31, 2013) p. 766-773. Warrendale, PA, USA : Association for Iron and Steel Technology.

K. Kouwonou, X. T. Pham, G. Lebrun. 2013. « Modeling and characterization of thermoplastic composites peek/carbon ». Proceedings of the 19th International Conference on Composite Materials-ICCM19 (Montreal, QC, Canada, July 28-Aug. 2, 2013)

Hugues Lessard, Gilbert Lebrun, Xuan-Tan Pham. 2013. « Experimental evaluation of the thermo-stamping process for a 3d composite part made of unidirectional cf/peek prepregs ». 45th ISTC (Wichita, KS, USA, Oct. 21-24, 2013) SAMPE.

Tan Pham, G. Pradinc, X. Cao, J. L. Fihey. 2013. « Modeling of moving heat sources using meshless element free galerkin method ». ASM Proceedings of the International Conference: Trends in Welding Research (Chicago, IL, USA, June 4-8, 2012) p. 746-751. OH, USA : ASM International.

V. Sabri, S.-Antoine Tahan, X. T. Pham, H. Radvar-Esfahlan, B. Louhichi, A. M. Tahvilian. 2013. « Fixtureless profile inspection of non-rigid parts ». Proceedings of International Conference on Computers and Industrial Engineering, CIE (Hong Kong, China, Oct. 16-18, 2013) p. 86-97. Curran Associates Inc..

Q. H. Bui, Tan Pham, M. Fafard. 2011. « A self-consistent model predicting the mechanical behavior of cold-draw 6063 aluminium tubes ». COM 2011 : Conference of Metallurgists (Montreal, Canada, Oct. 2-5, 2011)

X. T. Pham, P. Gougeon, F. O. Gagnon. 2009. « Welding simulation of cast aluminium A356 ». Trends in Welding Research : proceedings of the 8th International Conference (Pine Mountain, GA, USA, June 01-06, 2008) p. 258-263. ASM International.

D.-D. Dang, X.-T. Pham. 2016. « Numerical analysis of turbulent convective heat transfer in a rotor-stator configuration ». In Mathematical and Computational Approaches in Advancing Modern Science and Engineering . p. 413-424. Springer International Publishing.

X. T. Pham, N. H. Vu, V. François, J. -C. Cuillière. 2016. « Modeling and numerical simulation of multi-layered fiber-reinforced materials applied for non-rigid parts deformation during assembly process ». Communication during a conference : 7e colloque québécois sur le développement numérique de produits (CAO/FAO) ( Montréal, QC, Canada, 4 mai 2016 )

Xuan-Tan Pham. 2013. « Analyse thermique de Rosenthal par la méthode meshless element free Galerkin ». Communication during a conference : Séminaire "Modélisation avancée des cuves d'électrolyse et efficacité énergétique'' de la Chaire de recherche industrielle CRSNG/Alcoa sur la modélisation avancée des cuves d'électrolyse et l'efficacité énergétique, Université Laval ( Québec, QC, Canada, 16 mai 2013 )

Xuan-Tan Pham. 2013. « Simulation numérique du soudage par éléments finis avec Sysweld ». Communication during a conference : Symposoud 2013. Ensembles soudés: de la conception à la fabrication ( Varennes, QC, Canada, 30-31 mai 2013 )

G. Pradinc, X-T. Pham, X. Cao, J-L. Fihey, L. Mathieu. 2013. « An experimentally assisted numerical simulation of metal forming for thick and heavy plates by line heating ». Communication during a conference : Materials Science & Technology Conference and Exhibition 2013 (MS&T'13) ( Montreal, QC, Canada, Oct. 27-31, 2013 )