Skip to main content

Raynald Guilbault

Raynald Guilbault
Professeur
Degrees B.Ing., M.Sc.A. (Polytechnique Montréal), Ph.D. (Université Laval)
Office A-2900
Phone 514 396-8862
Presentation

Département de génie mécanique

Research interests:

  • Materials and manufacturing

Research areas:

  • Static and dynamic analysis of mechanical transmissions
  • Contact and lubrication
  • Crack modeling with boundary element models
Publications: article

Publications: article

Publications: article

Publications: article

Publications: conference_item
International Mechanical Engineering Congress and Exposition (IMECE 2017)
Publications: conference_item
44th International Congress and Exposition on Noise Control Engineering, INTER-NOISE 2015
Publications: article

Publications: article

Publications: conference_item
10th International Conference on Optimum Design in Engineering (OPTI)
Publications: conference_item
5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle
Publications: article

Publications: monograph

Publications: article

Publications: article

Publications: article

Publications: article

Publications: conference_item
3rd International Conference on Tribology and Design
Publications: article

Publications: conference_item
Tribology and Design II
Publications: conference_item
Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2002-2003 : Actes
Publications: conference_itemau

Publications: article

Publications: conference_itemau

Publications: conference_item
International Conference on Gears
Publications: article

Publications: article

Publications: article

Publications: article

Publications: article

Publications: article

Publications: article

Publications: article

Publications: conference_item
Canadian Society for Mechanical Engineering Forum (CSME)
Publications: conference_item
Surveillance 7 : international conference : October 29-30, 2013, Chartres, France
Publications: conference_item
Surveillance 7 : international conference : October 29-30, 2013, Chartres, France
Publications: conference_item
4th Colloque Experimental Vibration Analysis, AVE 2014, November 18, 2014 - November 20, 2014
Publications: article

Publications: conference_item
5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle
Publications: article

Publications: conference_item
Surveillance 7 : international conference : October 29-30, 2013, Chartres, France
Publications: conference_item
CIRI 2013, 3ème Congrès International sur l’Ingénierie des Risques Industriels
Publications: conference_item
Condition Monitoring of Machinery in Non-Stationary Operations : Proceedings of the Second International Conference "Condition Monitoring of Machinery in Non-Stationnary Operations" CMMNO’2012
Publications: conference_item
Advances in Condition Monitoring of Machinery in Non-Stationary Operations : Proceedings of the third International Conference on Condition Monitoring of Machinery in Non-Stationary Operations CMMNO 2013
Publications: conference_item
3ième édition du colloque national sur l'analyse vibratoire expérimentale (AVE 2012)
Publications: article

Publications: conference_item
Canadian Society for Mechanical Engineering Forum (CSME)
Publications: conference_item
Compte rendu 24ième séminaire sur la vibration des machines : ACVM, 25-27 octobre 2006
Publications: article

Publications: conference_item
12th International Conference on Fracture 2009, ICF-12
Publications: article

Publications: article

Publications: article

Publications: article

Publications: conference_item
International Conference on Mechanical Engineering and Mechatronics (ICMEM'12)
Publications: article

Publications: article

Publications: article

Publications: conference_item
Proceedings of the 27th Seminar on Machinery Vibration
Publications: article

Publications: article

Publications: article

Courses and support services

Courses

MEC727 Tribologie (Summer 2023)
MEC729 Mécanismes et dynamique des machines (Summer 2023)
MEC727 Tribologie (Fall 2022)
MEC729 Mécanismes et dynamique des machines (Fall 2022)

Assistance to students

Mémoire à 24 crédits
  • Co-directed by: Lê, Van Ngan
    Mesure et prédiction des contraintes résiduelles dans une turbine hydraulique de type Francis, by Castrataro,Albert.
    Fall 2006
  • Contribution au développement d'un code de calcul des contraintes dans une turbine Francis, by Khalfi,Boubaker.
    Fall 2005
  • Application de la photoélastisité à la mesure de la contrainte dynamique des engrenages cylindriques, by Martin,Bruno.
    Winter 2006
  • Étude expérimentale et numérique de l'effet des paramètres géométriques d'un contact coin sous chargement combiné, by Hadri,Farouk.
    Summer 2008
  • Co-directed by: Thomas, Marc
    Étude expérimentale du comportement dynamique des engrenages cylindriques, by Hingray,Bertrand.
    Summer 2008
Rapport technique à 6 crédits
  • Étude de la sévérité du bridage sur le niveau des contraintes résiduelles dans les joints soudés des turbines Francis, by Koum,Elvis Charly.
    Fall 2010
  • Réduction des contraintes dans une turbine hydraulique, by Koum,Elvis Charly.
    Fall 2010
  • Pratt & Whitney Canada Oil Analysis Technology Trial, by Arnold,Clémentine.
    Winter 2017
Stage industriel à 6 crédits
  • Emerging Technologies & Concepts, by Sabsaby,Mahmoud.
    Fall 2007
Mémoire à 30 crédits
  • Modélisation de la propagation des fissures dans les engrenages par la méthode des éléments de frontières, by Lalonde,Sébastien.
    Winter 2008
  • Développement d'une méthode de calcul des contraintes résiduelles pour la méthode des contours et mesures expérimentales des contraintes résiduelles de joints soudés en T sous l'influence de bridage, by Lévesque,Jean-Benoit.
    Winter 2010
  • Co-directed by: Guilbault, Raynald
    Simulation numérique du comportement vibratoire d'engrenages endommagés, by Palaisi,David.
    Fall 2010
  • Optimisation des systèmes de transmission de puissance pour éolienne, by Marcoux,Éric.
    Winter 2013
  • Modeling the Influence of Surface Pitting on Contact Pressure and Friction Coefficient Under Elastohydrodynamic Lubrication Conditions, by Mirkarimi,Hengameh Sadat.
    Summer 2020
  • Modélisation des forces d'usinage et optimisation du comportement dynamique d'une raboteuse industrielle haute vitesse, by Aboussafy,Charles.
    Fall 2020
  • Co-directed by: Zaghib, Karim
    Optimisation du concept des cellules au lithium tout solide de nouvelle génération et developpement d'outils d'aide à la conception, by Noël-Houde,Jean-Philippe.
    Summer 2023
  • Conception d'une transmission mécanique à vitesse infiniment variable pour optimiser le rendement des véhicules électriques, by Khaldi,Abdelhakim.
    Fall 2023
Thèse de doctorat (recherche appliquée)
  • Co-directed by: Sabourin, Robert
    Improving Evolutionary Algorithms by Means of an Adaptative Parameter Control Approach, by Corriveau,Guillaume.
    Fall 2012
  • Characterization of Edge-Contact Influence on Tridimensional Elastohydrodynamic Film Shape, Pressure, Stress, and Temperature Distributions, by Najjari,Morteza.
    Fall 2014
  • Co-directed by: El Badaoui, Mohamed
    Diagnostic des défauts de fissures d'engrenages par l'analyse cyclostationnaire, by Kidar,Thameur.
    Winter 2015
  • Co-directed by: Guilbault, Raynald
    Noise Source Identification and Dynamic Modeling of a Pneumatic Nailing Device, by Nili Ahmadabadi,Zahra.
    Summer 2016
  • Thermoelastic Analysis of Contacts Defined by Straight or Curved Boundaries under Dry or Elastohydrodynamic Lubrication Conditions, by Yalpanian,Ali.
    Fall 2021
  • Co-directed by: Brunetière, Noël
    Évaluation et optimisation de l'efficacité des surfaces texturées dans les engrenages, by Aboussafy,Charles.
    Fall 2023
  • Co-directed by: Lalonde, Sébastien
    Development of a Multi-Frequency Energy Generating Damper for High Voltage Conductors, by Nkiegaing,Franck.
    Fall 2023
Projet d'application à 15 crédits
  • Method for Estimating Bulk Temperature of Gears in Power Transmission, by Marotte,Francis.
    Fall 2014
  • Co-directed by: Carter, Alan
    Conception d’un banc d’essai de chaussée pour poids lourds, by Riendeau,Stécy.
    Fall 2022
  • Modélisation par éléments finis du contact entre les dents et effets d'un mauvais ajustement d'une réparation dentaire sur les forces transmises à la machoire, by Abdelouhab,Meriem.
    Summer 2023
  • Co-directed by: Perreault, Christian
    Optimisation du soudage par ultrasons des contacts électriques d’une batterie tout solide, by El Mazouzi,Mustapha.
    Winter 2022
  • Co-directed by: Guilbault, Raynald
    Modélisation de l'effet des réparations de conducteur sur la distribution des contraintes en vue d'améliorer sa résistance à la fatigue, by Youdom Yimbi,Guy Hermann.
    Summer 2023
Projet d'intervention en entreprise à 15 crédits
  • Co-directed by: Lalonde, Sébastien
    Modélisation numérique du comportement vibratoire et évaluation de l’énergie vibratoire de conducteurs haute tension de grande portée soumis à des vibrations éoliennes, by Braun,Léo.
    Winter 2023
  • Comparaison des méthodes d'analyse en fatigue des composantes mécaniques d'un groupe turbine-alternateur, by Laurens,Emma.
    Summer 2023
Stage industriel et rapport technique, 3 cr.
  • Stagiaire en conception mécanique, by Laurens,Emma.
    Summer 2023
Publications
Peer-reviewed article published in a refereed journal (35)

Ali Yalpanian, Raynald Guilbault. 2022. « A fast thermoelastic model based on the half-space theory applied to elastohydrodynamic lubrication of line contacts involving free boundaries ». Journal of Tribology. vol. 144 , nº 8.

Charles Aboussafy, Raynald Guilbault. 2021. « Chip formation in machining of anisotropic plastic materialsa finite element modeling strategy applied to wood ». International Journal of Advanced Manufacturing Technology. vol. 114 , nº 5/6. p. 1471-1486.

Raynald Guilbault, Sébastien Lalonde. 2021. « Tip relief designed to optimize contact fatigue life of spur gears using adapted PSO and firefly algorithms ». SN Applied Sciences. vol. 3 , nº 1.

Ali Yalpanian, Raynald Guilbault. 2021. « A systematic solution based on the half-space concept for modeling of thermoelastic contact between bodies defined by curved free boundaries ». Acta Mechanica. vol. 232 p. 5003-5029.

Ali Yalpanian, Raynald Guilbault. 2020. « A fast correction for half-space theory applied to contact modeling of bodies with curved free surfaces ». Tribology International. vol. 147 13 p.

Z. Nili Ahmadabadi, Raynald Guilbault, Frédéric Laville. 2019. « Nonlinear dynamic modeling of pneumatic nailing devices ». Mathematical and Computer Modelling of Dynamical Systems. vol. 25 , nº 2. p. 195-223.

Mohamed Benadda, Ahmed Bouzidane, Marc Thomas, Raynald Guilbault. 2019. « Dynamic behavior analysis of a rigid rotor supported by hydrostatic squeeze film dampers compensated with new electrorheological valve restrictors ». Industrial Lubrication and Tribology. vol. 72 , nº 5. p. 611-619.

Raynald Guilbault, Sébastien Lalonde. 2019. « A stochastic prediction of roughness evolution in dynamic contact modelling applied to gear mild wear and contact fatigue ». Tribology International. vol. 140

Aboubakeur Benariba, Ahmed Bouzidane, Marc Thomas, Raynald Guilbault. 2018. « Numerical analysis of a rigid rotor mounted on four-pad hydrostatic squeeze film damper lubricated with micropolar lubricant ». Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. vol. 232 , nº 5. p. 513-524.

Sébastien Lalonde, Raynald Guilbault, Sébastien Langlois. 2018. « Numerical analysis of ACSR conductor-clamp systems undergoing wind-induced cyclic loads ». IEEE Transactions on Power Delivery. vol. 33 , nº 4. p. 1518-1526.

Sébastien Lalonde, Raynald Guilbault, Sébastien Langlois. 2017. « Modeling multilayered wire strands, a strategy based on 3D finite element beam-to-beam contacts - Part II: Application to wind-induced vibration and fatigue analysis of overhead conductors ». International Journal of Mechanical Sciences. vol. 126 p. 297-307.

Sébastien Lalonde, Raynald Guilbault, Frédéric Légeron. 2017. « Modeling multilayered wire strands, a strategy based on 3D finite element beam-to-beam contacts - Part I: Model formulation and validation ». International Journal of Mechanical Sciences. vol. 126 16 p. p. 281-296.

Z. Nili Ahmadabadi, Frédéric Laville, Raynald Guilbault. 2016. « Time domain identification and ranking of noise sources in a pneumatic nail gun ». Applied Acoustics. vol. 114 p. 191-202.

Guillaume Corriveau, Raynald Guilbault, Antoine Tahan, Robert Sabourin. 2016. « Bayesian network as an adaptive parameter setting approach for genetic algorithms ». Complex & Intelligent Systems. vol. 2 , nº 1. p. 1-22.

Raynald Guilbault, Sébastien Lalonde. 2016. « Early diagnostic of concurrent gear degradation processes progressing under time-varying loads ». Mechanical Systems and Signal Processing. vol. 76-77 p. 337-352.

Z. Nili Ahmadabadi, Frédéric Laville, Raynald Guilbault. 2015. « An empirical prediction law for quasi-static nail-plywood penetration resistance ». Construction and Building Materials. vol. 88 p. 126-133.

Raynald Guilbault, Sébastien Lalonde, Marc Thomas. 2015. « Modeling and monitoring of tooth fillet crack growth in dynamic simulation of spur gear set ». Journal of Sound and Vibration. vol. 343 p. 144-165.

Mourad Kedadouche, Marc Thomas, Antoine Tahan, Raynald Guilbault. 2015. « Nonlinear parameters for monitoring gear: comparison between lempel-ziv, approximate entropy, and sample entropy complexity ». Shock and Vibration. vol. 2015 12 p.

Morteza Najjari, Raynald Guilbault. 2015. « Formula derived from particle swarm optimization (PSO) for optimum design of cylindrical roller profile under EHL regime ». Mechanism and Machine Theory. vol. 90 p. 162-174.

T. Kidar, M. Thomas, M. El Badaoui, R. Guilbault. 2014. « Control of phases by ESPRIT and WLSE methods for the early detection of gear cracks ». Mechanics & Industry. vol. 15 , nº 6. p. 487-495.

Morteza Najjari, Raynald Guilbault. 2014. « Edge contact effect on thermal elastohydrodynamic lubrication of finite contact lines ». Tribology International. vol. 71 p. 50-61.

Morteza Najjari, Raynald Guilbault. 2014. « Modeling the edge contact effect of finite contact lines on subsurface stresses ». Tribology International. vol. 77 p. 78-85.

Guillaume Corriveau, Raynald Guilbault, Antoine Tahan, Robert Sabourin. 2013. « Review of phenotypic diversity formulations for diagnostic tool ». Applied Soft Computing. vol. 13 , nº 1. p. 9-26.

Raynald Guilbault. 2013. « A simplified thermal analysis of elastohydrodynamic contacts ». Journal of Tribology. vol. 135 , nº 2.

Raynald Guilbault, Sebastien Lalonde, Marc Thomas. 2013. « Corrigendum to "Nonlinear damping calculation in cylindrical gear dynamic modeling" [J. Sound Vib. 331/9 (2012) 2110–2128] ». Journal of Sound and Vibration. vol. 332 , nº 20. p. 5240.

Thameur Kidar, Marc Thomas, Raynald Guilbault, El Badaoui Mohamed. 2013. « Comparison between the efficiency of L.M.D and E.M.D algorithms for early detection of gear defects ». Mechanics and Industry. vol. 14 , nº 2. p. 121-127.

Guillaume Corriveau, Raynald Guilbault, Antoine Tahan, Robert Sabourin. 2012. « Review and study of genotypic diversity measures for real-coded representations ». IEEE Transactions on Evolutionary Computation. vol. 16 , nº 5. p. 695-710.

Raynald Guilbault, Sébastien Lalonde, Marc Thomas. 2012. « Nonlinear damping calculation in cylindrical gear dynamic modeling ». Journal of Sound and Vibration. vol. 331 , nº 9. p. 2110-2128.

Raynald Guilbault. 2011. « A fast correction for elastic quarter-space applied to 3D modeling of edge contact problems ». Journal of Tribology. vol. 133 , nº 3. 10 p.

Sébastien Lalonde, Raynald Guilbault. 2011. « Prediction of thin-rimmed gear crack propagation from a factorial design approach ». Fatigue and Fracture of Engineering Materials and Structures. vol. 34 , nº 7. p. 470-486.

Guillaume Corriveau, Raynald Guilbault, Antoine Tahan. 2010. « Genetic algorithms and finite element coupling for mechanical optimization ». Advances in Engineering Software. vol. 41 , nº 3. 5 p. p. 422-426.

Sébastien Lalonde, Raynald Guilbault. 2009. « Finite separation method : an efficient boundary element crack modeling technique ». Computational Mechanics. vol. 44 , nº 6. 17 p. p. 791-807.

Raynald Guilbault. 2006. « Tooth influence on flexural and torsional flexibility, and model tooth number prediction for optimum dynamic simulation of wide-faced spur gears ». Journal of Mechanical Design. vol. 128 , nº 3. p. 626-633.

Raynald Guilbault, Claude Gosselin, Louis Cloutier. 2006. « Helical gears, effects of tooth deviations and tooth modifications on load sharing and fillet stresses ». Journal of Mechanical Design. vol. 128 , nº 2. p. 444-456.

Raynald Guilbault, Claude Gosselin, Louis Cloutier. 2005. « Express model for load sharing and stress analysis in helical gear ». Journal of Mechanical Design. vol. 127 , nº 6. p. 1161-1172.

Conference proceeding (23)

Zahra Nili Ahmadabadi, Frédéric Laville, Raynald Guilbault. 2017. « An empirical prediction law for quasi-static nail-particle board penetration resistance ». International Mechanical Engineering Congress and Exposition (IMECE 2017) (Tampa, FL, USA, Nov. 03-09, 2017) p. ASME. American Society of Mechanical Engineers (ASME).

Zahra Nili Ahmadabadi, Frédéric Laville, Raynald Guilbault. 2015. « Study of parameters influencing pneumatic nail-gun noise ». 44th International Congress and Exposition on Noise Control Engineering, INTER-NOISE 2015 (San Francisco, CA, USA, Aug. 9-12, 2015) p. 17-28. The Institute of Noise Control Engineering of the USA, Inc..

Mourad Kedadouche, Marc Thomas, Antoine Tahan, Raynald Guilbault. 2015. « Monitoring gears by vibration measurements: Lempel-Ziv complexity and approximate entropy as diagnostic tools ». 4th Colloque Experimental Vibration Analysis, AVE 2014, November 18, 2014 - November 20, 2014 (Blois, France, Nov. 18-20, 2014) EDP Sciences.

Thameur Kidar, Marc Thomas, Mohamed Elbadaoui, Raynald Guilbault. 2014. « Phase Monitoring by ESPRIT with Sliding Window and Hilbert Transform for Early Detection of Gear Cracks ». Advances in Condition Monitoring of Machinery in Non-Stationary Operations : Proceedings of the third International Conference on Condition Monitoring of Machinery in Non-Stationary Operations CMMNO 2013 (Ferrara, Italy, ) p. 287-299. Springer Berlin Heidelberg.

M. Kedadouche, T. Kidar, M. Thomas, A. Tahan, M. El Badaoui, R. Guilbault. 2013. « A comparative study between acoustic emission and vibration for early detection of gear cracks ». Surveillance 7 : international conference : October 29-30, 2013, Chartres, France (Chartres, France, Oct. 29-30, 2013) France : Institute of Technology.

Mourad Kedadouche, Thameur Kidar, Marc Thomas, Antoine Tahan, Mohamed El Badaoui, Raynald Guilbault. 2013. « Combining EMD and Lempel-Ziv complexity for early detection of gear cracks ». Surveillance 7 : international conference : October 29-30, 2013, Chartres, France (Chartres, France, Oct. 29-30, 2013) Chartres, France : Institute of Technology.

T. Kidar, M. Thomas, M. El Badaoui, R. Guilbault. 2013. « Diagnosis of gear faults by cyclostationnarity ». Surveillance 7 : international conference : October 29-30, 2013, Chartres, France (Chartres, France, Oct. 29-30, 2013) Chartres, France : Institute of Technology.

Thameur Kidar, Marc Thomas, Mohamed El Badaoui, Raynald Guilbault. 2013. « Control of phases by Esprit and WLSE methods for the early detection of gear cracks ». CIRI 2013, 3ème Congrès International sur l’Ingénierie des Risques Industriels (Reims, France, July 3-5, 2013) Reims, France : Université de Reims Champagne-Ardenne.

Raynald Guilbault. 2012. « Influence of thermal shear localization on elastohydrodynamic contacts ». Tribology and Design II (Kos, Greece, Sept. 3-5, 2012) p. 3-16. Billerica, MA : Wit Press.

Thameur Kidar, Marc Thomas, Mohamed Elbadaoui, Raynald Guilbault. 2012. « Application of Time Descriptors to the Modified Hilbert Transform of Empirical Mode Decomposition for Early Detection of Gear Defects ». Condition Monitoring of Machinery in Non-Stationary Operations : Proceedings of the Second International Conference "Condition Monitoring of Machinery in Non-Stationnary Operations" CMMNO’2012 (Hammamet, Tunisia, Mar. 26-28, 2012) p. 471-479. Berlin, Heidelberg : Springer Berlin Heidelberg.

Thameur Kidar, Marc Thomas, Raynald Guilbault, Mohamed El Badaoui. 2012. « Comparison between the efficiency of LMD and EMD algorithms for early detection of gear defects ». 3ième édition du colloque national sur l'analyse vibratoire expérimentale (AVE 2012) (Blois, France, Nov. 20-21, 2012)

M. Najjari, R. Guilbault. 2012. « Edge correction in the elastohydrodynamic lubrication of finite line contact ». International Conference on Mechanical Engineering and Mechatronics (ICMEM'12) (Ottawa, ON, Canada, Aug. 16-18, 2012) p. 76.71-76.78. Ottawa, ON, Canada : Avestia Publishing.

Raynald Guilbault. 2010. « A fast correction for traction-free surface of elastic quarter-space ». 3rd International Conference on Tribology and Design (Algarve, Portugal, May 11-13, 2010) p. 37-48. WITPress.

Sébastien Lalonde, Raynald Guilbault. 2009. « Numerical characterization of thin-rimmed gear tooth bending fatigue crack propagation ». 12th International Conference on Fracture 2009, ICF-12 (Ottawa, ON, Canada, July 12-17, 2009) p. 5827-5836. Japan : International Congress on Fracture.

D. Palaisi, Raynald Guilbault, Marc Thomas, A. A. Lakis, N. Mureithi. 2009. « Numerical simulations of damaged gear vibrations ». Proceedings of the 27th Seminar on Machinery Vibration (Vancouver, BC, Canada, Oct. 28-30, 2009)

Raynald Guilbault, Marc Thomas. 2008. « Prediction of resonances of thin-rimmed cylindrical gears from a sub-structuring approach ». Canadian Society for Mechanical Engineering Forum (CSME) (Ottawa, ON, Canada, June 5-8, 2008) CSME.

Sébastien Lalonde, Raynald Guilbault. 2008. « A new and efficient approach for boundary element 2D crack modeling ». Canadian Society for Mechanical Engineering Forum (CSME) (Ottawa, ON, Canada, June 5-8, 2008)

G. Corriveau, Raynald Guilbault, Antoine Tahan. 2007. « Genetic algorithms and finite element coupling for mechanical optimization ». 10th International Conference on Optimum Design in Engineering (OPTI) (Myrtle Beach, USA, May 7- 9, 2007) p. 87-96. Southampton, UK : WITPress.

G. Corriveau, Raynald Guilbault, Antoine Tahan. 2007. « Optimisation d'une turbine hydroélectrique par algorithmes génétiques ». 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montréal, Canada, June 11-13, 2007) Montréal, Qué., Canada : École de technologie supérieure.

B. Khalfi, Raynald Guilbault. 2007. « Turbine hydroélectrique Francis: un nouveau modèle rapide et précis de calcul des contraintes ». 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montréal, Canada, June 11-13, 2007) Montréal, Qué., Canada : École de technologie supérieure.

Sébastien Lalonde, Raynald Guilbault. 2006. « Dynamic analysis of spur gears by non linear modeling ». Compte rendu 24ième séminaire sur la vibration des machines : ACVM, 25-27 octobre 2006 (Montreal, QC, Canada, Oct. 25-27, 2006) p. 15-35. Calgary : ACVM.

Raynald Guilbault, L. Cloutier. 2005. « Numerical investigation of the influence of rim and web thickness on vibration modes of thin-rimmed cylindrical gears ». International Conference on Gears (Munich, Germany, Sept. 14-16, 2005) p. 651-669. Germany : VDI Verlag GMBH.

Raynald Guilbault. 2003. « Mise au point d'un laboratoire sur l'équilibrage dynamique des rotors rigides déséquilibrés pour le cours MEC729 - Mécanismes et dynamique des machines ». Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2002-2003 : Actes (Montréal, QC, Canada, 25 avril 2003) p. 49-57. École de technologie supérieure.

Technical report (1)

Guillaume Corriveau, Raynald Guilbault, Antoine Tahan, R. Sabourin. 2015. « Evaluation of genotypic diversity measurements exploited in real-coded representation ». arXiv. 13 p.

Communication (2)

Raynald Guilbault. 2005. « Modes vibratoires des roues d'engrenage cylindriques : un outil de conception adapté ». Communication during a conference : Conférence de l'Association Canadienne en Vibration des Machines (ACVM) ( Montréal, QC, Canada, Oct. 2005 )

Raynald Guilbault, L. Cloutier. 2005. « Numerical investigation of the influence of rim and web thickness on vibration modes of thin-rimmed cylindrical gears ». Communication during a conference : International Conference on Gears ( Munich, Germany, Sept. 14-16, 2005 )

Awards and honors

Prix d'excellence du c.a. en enseignement 2013 |École de technologie supérieure
2013