Philippe Causse

Professeur
Degrees B.Ing., M.Sc.., Ph.D. (Polytechnique Montréal)
Office A-3649
Presentation

Département de génie des systèmes

Research interests:

  • Materials and manufacturing
  • Aerospace
  • Energy

Research areas:

  • Composite materials
  • Manufacturing process development and optimization
  • Numerical simulation and virtual manufacturing
  • Material characterization
Publications: conference_item
38th IAHR World Congress : 'Water – Connecting the World"
Publications: article

Publications: conference_item
6th International Conference on Science and Technology of Composite Materials (COMAT)
Publications: conference_item
10th Canadian-International Conference on Composites : Advanced Composites in Addressing Global Challenges of the 21st Century (CANCOM)
Publications: conference_item
13th International Conference on Flow Processing in Composite Materials
Publications: article

Publications: conference_item
18th International Conference on Composites Materials (ICCM)
Publications: conference_item
Proceedings of the American Society for Composites 2011-Twenty-Sixth Technical Conference (2011)
Publications: conference_item
19th International Conference on Composite Materials (ICCM)
Publications: conference_item
14th International Conference on Flow Processing in Composite Materials
Publications: article

Publications: article

Publications: article

Publications: article

Publications: conference_item
20th International Conference on Composite Materials (ICCM)
Publications: article

Publications: article

Publications: article

Publications: article

Publications: article

Publications: article

Publications: article

Publications: article

Publications: conference_item
19th International Conference on Composite Materials (ICCM)
Publications: article

Publications: conference_item
7th International Symposium on Air/Craft Materials (ACMA)
Courses and support services

Courses

GPA772 Conception de machines (Winter 2021)
GPA772 Conception de machines (Summer 2020)
Publications
Peer-reviewed article published in a refereed journal (15)

Igor Belot, Yisun Sun, David Vidal, Martin Votsmeier, Philippe Causse, François Trochu, François Bertrand. 2021. « A 3D additive manufacturing approach for the validation of a numerical wall-scale model of catalytic particulate filters ». Chemical Engineering Journal. vol. 405 18 p.

Claudio Di Fratta, Yixum Sun, Philippe Causse, François Trochu. 2020. « A dimensionless characteristic number for process selection and mold design in composites manufacturing: Part I—Theory ». Journal of Composites Science. vol. 4 , nº 1. 16 p.

Claudio Di Fratta, Yixun Sun, Philippe Causse, François Trochu. 2020. « A dimensionless characteristic number for process selection and mold design in composites manufacturing: Part II—Applications ». Journal of Composites Science. vol. 4 , nº 1.

W. Huang, P. Causse, H. Hu, S. Belouettar, F. Trochu. 2020. « Transverse compaction of 2D glass woven fabrics based on material twins – Part I: Geometric analysis ». Composite Structures. vol. 237 10 p.

W. Huang, P. Causse, H. Hu, S. Belouettar, F. Trochu. 2020. « Transverse compaction of 2D glass woven fabrics based on material twins – Part II: Tow and fabric deformations ». Composite Structures. vol. 237 10 p.

Wei Huang, Philippe Causse, Heng Hu, François Trochu. 2020. « Numerical and experimental investigation of saturated transverse permeability of 2D woven glass fabrics based on material twins ». Polymer Composites. vol. 41 , nº 4. 15 p. p. 1341–1355.

Yixun Sun, Philippe Causse, Brahim Benmokrane, François Trochu. 2020. « Permeability measurement of granular porous materials by a modified falling-head method ». Journal of Engineering Mechanics. vol. 146 , nº 9.

W. Huang, P. Causse, V. Brailovski, H. Hu, F. Trochu. 2019. « Reconstruction of mesostructural material twin models of engineering textiles based on Micro-CT Aided Geometric Modeling ». Composites Part A: Applied Science and Manufacturing. vol. 124

Wei Huang, Qun Huang, Yin Liu, Jie Yang, Heng Hu, François Trochu, Philippe Causse. 2019. « A Fourier based reduced model for wrinkling analysis of circular membranes ». Computer Methods in Applied Mechanics and Engineering. vol. 345 p. 1114-1137.

Anna Madra, Philippe Causse, François Trochu, Jérôme Adrien, Eric Maire, Piotr Breitkopf. 2019. « Stochastic characterization of textile reinforcements in composites based on X-ray microtomographic scans ». Composite Structures. vol. 224 11 p.

Philippe Causse, Christophe Ravey, François Trochu. 2018. « Capillary characterization of fibrous reinforcement and optimization of injection strategy in resin transfer molding ». Journal of Composites Science. vol. 2 , nº 2. 15 p.

Beliny Bonnard, Philippe Causse, François Trochu. 2017. « Experimental characterization of the pore size distribution in fibrous reinforcements of composite materials ». Journal of Composite Materials. vol. 51 , nº 27. p. 3807-3818.

Philippe Causse, Ed Ruiz, François Trochu. 2013. « Influence of preforming on the quality of curved composite parts manufactured by flexible injection ». International Journal of Material Forming. vol. 6 , nº 3. p. 341-362.

Philippe Causse, Edu Ruiz, François Trochu. 2012. « Spring-in behavior of curved composites manufactured by Flexible Injection ». Composites Part A: Applied Science and Manufacturing. vol. 43 , nº 11. p. 1901-1913.

Philippe Causse, Edu Ruiz, François Trochu. 2011. « Experimental study of flexible injection to manufacture parts of strong curvature ». Polymer Composites. vol. 32 , nº 6. p. 882-895.

Conference proceeding (11)

F. Anne, C. Béguin, S. Etienne, P. Causse, D. Scott, L. Bornard. 2019. « Void fraction and bubble size measurement inside clouds of air bubbles in flowing water ». 38th IAHR World Congress : 'Water – Connecting the World" (Panama city, Panama, Sept. 01-06, 2019) IAHR.

P. Causse, F. Trochu. 2018. « Combined characterization of pore size distribution and permeability in fibrous textiles by capillary flow porometry ». 14th International Conference on Flow Processing in Composite Materials (Lulea, Switzerland, May 30 - June 01, 2018)

F. Trochu, S. Hilal, W. Huang, Y. Sun, P. Causse, V. Brailovski. 2018. « Reconstruction and data compression of three-dimensional composite fiber architecture from microtomographic images ». 7th International Symposium on Air/Craft Materials (ACMA) (Compiègne, France, Apr. 24-26, 2018)

B. Bonnard, P. Causse, F. Trochu. 2017. « Characterization of fibrous reinforcements by capillary flow porometry: influence of fiber volume fraction ». 10th Canadian-International Conference on Composites : Advanced Composites in Addressing Global Challenges of the 21st Century (CANCOM) (Ottawa, ON, Canada, July 17-20, 2017)

B. Bonnard, P. Causse, F. Trochu. 2016. « Experimental investigation of capillary flow porometry for characterization of dual scale porosity in fibrous reinforcements ». 13th International Conference on Flow Processing in Composite Materials (Kyoto, Japan, July 06-08, 2016)

M. Benavente, P. Causse, N. Vernet, L. Marcin, T. Godon, E. Ruiz. 2015. « Residual stresses in 3D interlock composites: characterization and simulation ». 6th International Conference on Science and Technology of Composite Materials (COMAT) (Buenos Aires, Argentina, May 07-08, 2015)

H. Courteau-Godmaire, E. R. Fotsing, P. Causse, M. Lévesque, E. Ruiz. 2015. « Numerical modeling of resin shrinkage around insert in composite sandwich panels ». 20th International Conference on Composite Materials (ICCM) (Copenhagen, Denmark, July 19-24, 2015) International Committee on Composite Materials.

P. Causse, E. Ruiz, F. Trochu. 2013. « Processing warpage of asymmetric composite panels manufactured by resin transfer molding ». 19th International Conference on Composite Materials (ICCM) (Montréal, QC, Canada, July 28 - Aug. 02, 2013) p. 440-447. International Committee on Composite Materials.

J. Renaud, P. Causse, E. Ruiz, F. Trochu. 2013. « A study of consolidation equilibrium in composites made by flexible injection ». 19th International Conference on Composite Materials (ICCM) (Montréal, QC, Canada, July 28 - Aug. 02, 2013) p. 1223-1233. International Committee on Composite Materials.

P. Causse, E. Ruiz, F. Trochu. 2011. « Analysis of fiber preforming for improved manufacturing of curved parts by flexible injection ». 18th International Conference on Composites Materials (ICCM) (Jeju, Korea, Republic of, Aug. 21-26, 2011) International Committee on Composite Materials.

P. Causse, E. Ruiz, F. Trochu. 2011. « Fabrication of curved parts by flexible injection: Influence of processing conditions on composite quality and analysis of distortion ». Proceedings of the American Society for Composites 2011-Twenty-Sixth Technical Conference (2011) (Montreal, QC, Canada, Sept. 26-28, 2011) p. 1340-1351. DEStech Publications.

Awards and honors