Hakim Bouzid

Professeur
Degrees B.Sc. (Nottingham, G.-B.), M.Sc. (Leeds, G.-B.), Ph.D. (Polytechnique Montréal)
Office A-1902
Presentation

Département de génie mécanique

Research interests:

  • Energy
  • Materials and manufacturing
  • Health

Research areas:

  • Static and dynamic tightness tsting
  • Gaskets, seals and packings
  • Stress analysis
  • Design of pressure vessels
  • Finite element analysis
  • Tribology (lubrification, friction and wear)
  • Non-linear behaviour of structures
  • Plasticity, creep and relaxation
  • Reliability, risk and safety assessment
Publications: book

Publications: book

Publications: book

Publications: book_section
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics
Publications: book_section
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics
Publications: book

Publications: book

Publications: book

Publications: book

Publications: book_section
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics
Publications: book_section
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics
Publications: book

Publications: book

Publications: book

Publications: conference_item
ASME Pressure Vessels and Piping Conference (PVP)
Publications: conference_itemau

Publications: article

Publications: conference_item
International Pipeline Conference
Publications: conference_item
2009 ASME Pressure Vessels and Piping Conference (PVP)
Publications: article

Publications: book

Publications: conference_item
ASME 2016 Pressure Vessels and Piping Conference (PVP)
Publications: article

Publications: monograph

Publications: conference_item
ASME Pressure Vessels and Piping Conference (PVP)
Publications: conference_item
Pressure Vessels and Piping Conference (PVP)
Publications: conference_item
American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP
Publications: article

Publications: conference_item
ASME 2018 Pressure Vessels and Piping Conference (PVP 2018)
Publications: article

Publications: conference_item
ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference
Publications: conference_item
ASME 2012 Pressure Vessels and Piping Conference, PVP 2012
Publications: conference_item
ASME/JSME Pressure Vessels and Piping Conference (PVP)
Publications: conference_item
2004 ASME/JSME Pressure Vessels and Piping Conference (PVP)
Publications: conference_item
ASME Pressure Vessels and Piping Conference (PVP)
Publications: conference_item
ASME 2017 Pressure Vessels and Piping Conference (PVP 2017)
Publications: article

Publications: conference_item
ASME 2018 International Mechanical Engineering Congress and Exposition
Publications: article

Publications: conference_item
2009 ASME Pressure Vessels and Piping Conference (PVP)
Publications: article

Publications: conference_item
10th International Conference on Pressure Vessel Technology (ICPVT-10)
Publications: article

Publications: article

Publications: article

Publications: monograph

Publications: article

Publications: conference_item
ASME 2017 Pressure Vessels and Piping Conference (PVP 2017)
Publications: conference_item
2009 ASME Pressure Vessels and Piping Conference (PVP)
Publications: conference_item
Gesellschaft für Arbeitswissenschaft : Soziotechnische Gestaltung des digitalen Wandels – kreativ, innovativ, sinnhaft
Publications: article

Publications: conference_itemau

Publications: article

Publications: article

Publications: article

Publications: article

Publications: article

Publications: article

Publications: article

Publications: article

Publications: book_section
Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics
Publications: conference_itemau

Publications: conference_item
21st International Conference on Composite Materials
Publications: conference_item
ASME 2017 Pressure Vessels and Piping Conference (PVP 2017)
Publications: conference_item
World Congress on Advances in Structural Engineering an Mechanics (ASEM 17), The 2017 International Conference onSteel and Composite Structures (ICSCS17)
Publications: conference_item
ASME 2017 International Mechanical Engineering Congress and Exposition (IMECE 2017)
Publications: article

Publications: article

Publications: article

Publications: conference_itemau

Publications: conference_item
7th International Metrology Conference – CAFMET 2018
Publications: conference_itemaff

Publications: conference_item
Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2001-2002 : Actes
Publications: book_section
Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics
Publications: conference_item
ASME 2017 Pressure Vessels and Piping Conference (PVP 2017)
Publications: conference_item
ASME 2016 Pressure Vessels and Piping Conference (PVP)
Publications: article

Publications: article

Publications: conference_item
ASME 2018 International Mechanical Engineering Congress and Exposition
Publications: article

Publications: article

Publications: conference_item
Chancen durch Arbeits-, Produkt- und Systemgestaltung - Zukunftsfähigkeit für Produktions- und Dienstleistungsunternehmen : 27.02. bis 01.03.2013, Krefeld
Publications: conference_item
Proceedings 19th Triennial Congress of the International Ergonomics Association
Publications: book_section
Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics
Publications: book_section
Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics
Publications: article

Publications: conference_item
23rd International Conference on Fluid Sealing 2016
Publications: conference_item
American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP
Publications: conference_item
ASME Turbo Expo 2014: Turbine Technical Conference and Exposition
Publications: article

Publications: conference_item
ASME Pressure Vessels and Piping Conference (PVP)
Publications: article

Publications: conference_item
ASME 2016 Pressure Vessels and Piping Conference (PVP)
Publications: conference_item
International Conference on Advances in Mechanical and Automation Engineering-MAE 2014
Publications: article

Publications: conference_item
ICONE 2015 - 23rd International Conference on Nuclear Engineering: Nuclear Power - Reliable Global Energy
Publications: article

Publications: conference_item
ASME 2015 Pressure Vessels and Piping Conference.
Publications: article

Publications: article

Publications: book_section
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics
Publications: conference_item
ASME 2017 International Mechanical Engineering Congress and Exposition
Publications: article

Publications: conference_item
American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP
Publications: monograph

Publications: conference_item
Journées d'Etudes Européennes sur les Equipements sous Pression: Paris, 23, 24, 25 octobre 2001, Hôtel Sofitel, Forum Rive Gauche = European Symposium on Pressure Equipment - ESOPE 2001
Publications: conference_item
Proceedings of the 2000 ASME/PVP Conference
Publications: conference_item
ASME Pressure Vessels and Piping Conference (PVP)
Publications: article

Publications: conference_item
Proceedings of the Ninth International Conference on Pressure Vessel Technology ICPVT-9
Publications: conference_item
2002 ASME Prssure Vessels and Piping Conference : Analysis of Bolted Joints
Publications: conference_item
Proceedings of the 2000 ASME/PVP Conference
Publications: conference_item
ASME Pressure Vessels and Piping Conference (PVP)
Publications: conference_item
ASME Pressure Vessels and Piping Conference (PVP)
Publications: conference_item
Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering
Publications: conference_item
24th International Conference on Fluid Sealing, March 7, 2018 - March 8, 2018
Publications: book_section
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics
Publications: book_section
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics
Publications: article

Publications: conference_item
37th International Conference on Ocean, Offshore and Arctic Engineering
Publications: conference_item
ASME 2012 Pressure Vessels and Piping Conference, PVP 2012
Publications: article

Publications: article

Publications: article

Publications: book_section
Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics
Publications: book_section
Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics
Publications: book_section
Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics
Publications: conference_item
22ème Congrès Français de Mécanique
Publications: conference_item
Proceedings of the ASME Pressure Vessels and Piping Conference
Publications: article

Publications: conference_item
ASME 2015 Pressure Vessels and Piping Conference
Publications: article

Publications: article

Publications: article

Publications: article

Publications: conference_item
ASME 2018 Pressure Vessels and Piping Conference (PVP 2018)
Publications: conference_item
ASME Pressure Vessels and Piping Conference (PVP)
Publications: article

Publications: article

Publications: article

Publications: article

Publications: article

Publications: article

Publications: conference_item
ASME 2016 Pressure Vessels and Piping Conference (PVP)
Publications: article

Publications: conference_itemau

Publications: article

Publications: conference_itemau

Publications: conference_item
2014 International Conference on High Performance and Optimum Design of Structures and Materials, HPSM 2014 which incorporated the Seminar on Optimum Design in Engineering, OPTI 2014
Publications: conference_item
ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference
Publications: conference_item
2009 ASME Pressure Vessels and Piping Conference (PVP)
Publications: conference_itemau

Publications: conference_item
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
Publications: conference_item
Twelfth Pan American Congress of Applied Mechanics (PACAM XII)
Publications: conference_itemau

Publications: article

Publications: article

Publications: conference_itemau

Publications: article

Publications: conference_item
Dokumentation des 59. Arbeitswissenschaftlichen Kongresses Krefeld 27.02.-01.03.2013
Publications: conference_item
ASME 2012 Pressure Vessels and Piping Conference, PVP 2012
Publications: conference_item
CIRI 2013, 3ème Congrès international sur l'ingénierie des risques industriels
Publications: article

Publications: article

Publications: conference_item
Congrès AQHSST 2010
Publications: conference_itemau

Publications: conference_item
Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2002-2003 : Actes
Publications: book_section
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics
Publications: article

Publications: article

Publications: conference_item
ASME 2013 Summer Bioengineering Conference (SBC)
Publications: conference_item
ASME 2018 Pressure Vessels and Piping Conference (PVP 2018)
Publications: book_section
Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics
Publications: conference_item
Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2001-2002 : Actes
Publications: conference_item
Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings
Publications: conference_item
Proceedings of the Ninth International Conference on Pressure Vessel Technology ICPVT-9
Publications: conference_item
ASME Pressure Vessels and Piping Conference (PVP)
Publications: conference_item
ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference
Publications: article

Publications: conference_itemaff

Publications: article

Publications: conference_item
ASME Pressure Vessels and Piping Conference (PVP)
Publications: article

Publications: conference_item
24e Congrès de l’Association Internationale de Pédagogie Universitaire (AIPU)
Publications: article

Publications: conference_itemau

Publications: conference_item
ASME Pressure Vessels and Piping Conference (PVP)
Publications: conference_itemau

Publications: article

Publications: conference_item
ASME Pressure Vessels and Piping Conference (PVP)
Publications: article

Publications: article

Publications: article

Publications: conference_item
ASME Pressure Vessels and Piping Conference (PVP)
Publications: article

Publications: article

Publications: conference_item
ASME Pressure Vessel & Piping Conference (PVP)
Publications: monograph

Publications: conference_item
ASME 2015 Pressure Vessels and Piping Conference
Publications: article

Publications: conference_item
ASME Pressure Vessels and Piping Conference (PVP)
Publications: conference_item
10th International Conference on Nuclear Engineering (ICONE)
Publications: conference_item
Pressure Vessels and Piping Conference (PVP) 2019
Publications: conference_item
ASME 2018 Pressure Vessels and Piping Conference (PVP 2018)
Publications: article

Publications: conference_item
12th International Conference on Nuclear Engineering (ICONE)
Publications: article_nrp

Publications: conference_item
5th International Conference on Computational Methods and Experiments in Materials Characterisation (MC)
Publications: conference_item
ASME Pressure Vessels and Piping Conference (PVP)
Publications: article

Publications: article

Publications: conference_item
ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference
Publications: conference_item
72e Congrès de l'ACFAS
Publications: article

Publications: article

Publications: article

Publications: conference_item
Proceedings of the Ninth International Conference on Pressure Vessel Technology ICPVT-9
Publications: article

Publications: conference_item
16th International Conference on Nuclear Engineering (ICONE)
Courses and support services

Courses

MEC555 Analyse des contraintes (Fall 2019)
SYS805 Résistance des matériaux avancée (Fall 2019)

Assistance to students

Mémoire à 21 crédits

    Développement d'une méthode de conception des assemblages à brides boulonnées basée sur la flexibilité et l'étanchéité, by Beghoul,Hichem.
    Fall 2003

    Effet de l'expansion thermique sur la redistribution des charges dans les assemblages à brides boulonnées, by Nechache,Akli.
    Fall 2002

Mémoire à 24 crédits

    Détermination de la largeur effective des joints d'étanchéité utilisée dans code ASME pour le calcul des brides, by Diany,Mohammed.
    Summer 2005

    Analyse des assemblages à brides boulonnées à face plate, by Galai,Hichem.
    Winter 2009

    Évaluation du gradient thermique circonférentiel et son influence sur les déflexions d'un assemblage à brides boulonnées d'un échangeur de chaleur avec plusieurs passes, by Petrova,Natalia.
    Winter 2010

Projet d'application à 9 crédits

    Effet de l'espacement des boulons sur la distribution des contraintes dans un assemblage à brides boulonnées muni d'un joint d'étanchéité, by M'Hadheb,Mustapha.
    Summer 2005

Thèse de doctorat

    Modélisation du phénomène de fluage-relaxation dans les assemblages à brides boulonnées munis de joint d'étanchéité, by Nechache,Akli.
    Fall 2007

Thèse de doctorat (recherche appliquée)

    Caractérisation et modélisation des garnitures de presse-étoupe, by Diany,Mohammed.
    Fall 2010

    Analyse des contraintes résiduelles dans les assemblages tubes-plaques à tubes dudgeonnés par pression hydraulique., by Laghzale,Nor Eddine.
    Fall 2009

    Co-directed by: Dao, Thien-My
    The effect of bolt spacing on the tightness behavior of bolted flange joints, by Do,Tan Dan.
    Winter 2012

    Prédiction des fuites gazeuses et des fuites liquides dans les joints d'étanchéité micro et nanoporeux, by Grine,Lotfi.
    Fall 2012

    Étude théorique et expérimentale du flambement des joints spiralés, by Attoui,Hocine.
    Summer 2019

    Co-directed by: Nadeau, Sylvie
    Développement d'un modèle analytique anisotrope non linéaire du disque intervertébral L5-S1, by Demers,Sébastien.
    Summer 2015

    Characterization and Modeling of Packed-stuffing Boxes, by Kazeminia,Mehdi.
    Fall 2016

    Co-directed by: Ngô, Anh Dung
    Analysis of Fiber Reinforced Plastic Bolted Flange Joints, by Khazraiyanvafadar,Ali.
    Summer 2019

    CREEP and Thermal Ratcheting of Soft Materials under Compression, by Kanthabhabha Jeya,Rahul Palaniappan.
    Fall 2018

    Prediction of Gas and Liquid Leak Rates in Compression Packing at Room Temperature, by Aweimer,Ali Salah Omar.
    Fall 2019

    Co-directed by: Nadeau, Sylvie
    Maîtrise des risques des réservoirs sous pression, by Esouilem,Mohamed.
    Fall 2019

    A Study of Parameters Affecting the Self-loosening of Bolted Joints, by Rousseau,Rashique Iftekhar.
    Fall 2019

Mémoire à 30 crédits

    Test rig and experimentation of packing seals used in large diameter deformed rotating drums, by Villiard,Jonathan.
    Fall 2010

    Amélioration de la procédure d'éclatement des joints d'étanchéité, by Benabdallah,Samir.
    Summer 2012

    On the Liquid Leak Rate Measurements Through Packing Seals, by Bathaei,Seyed Amir Hossein.
    Fall 2019

    Effect of Temperature on the Relaxation of Polyvinyl Chloride Flanges, by Zhao,Zijian.
    Summer 2017

    Analytical and Finite of Element Study of Residual Stresses in the Transition Zone of Hydraulically Expended Tube-to-tubesheet Joints, by Pourreza Katigari,Mohammadhossein.
    Winter 2018

    Development of a Test Bench to Study Self-Loosening of Bolted Joints, by Hasrak,Amir.
    Summer 2018

    Co-directed by: Gratton, MIchel
    Étude de l'autodesserrage des assemblages boulonnés, by Fort,Valentin.
    Summer 2018

    Caractérisation mécanique des tresses de valves à haute température, by Legault,Xavier.
    Fall 2018

Projet d'application à 15 crédits

    Étude expérimentale du taux de fuite d'un joint en graphite flexible, by Larbi,Abou Bakr.
    Fall 2011

    Analyse par la méthode des éléments finis de l'influence du dudgeonnage sur les contraintes résiduelles dans une plaque à tube, by Rezzak,Nabil.
    Winter 2017

    Modélisation théorique des assemblages à brides boulonnées en plastique renforcé de fibres munis de joints d'étanchéité, by Cizeron,Lucas.
    Winter 2019

Rapport technique à 6 crédits

    Prédiction des contraintes résiduelles dues à l'expansion par écrouissage à froid de trous dans les plaques d'alliage d'aluminium, by Touahri,Hacène.
    Winter 2018

Publications
Peer-reviewed article published in a refereed journal (79)

Ali Salah Omar Aweimer, Abdel-Hakim Bouzid. 2019. « Evaluation of interfacial and permeation leaks in gaskets and compression packing ». Journal of Nuclear Engineering and Radiation Science. vol. 5 , nº 1.

Ali Salah Omar Aweimer, Abdel-Hakim Bouzid, Mehdi Kazeminia. 2019. « Predicting leak rate through valve stem packing in nuclear applications ». Journal of Nuclear Engineering and Radiation Science. vol. 5 , nº 1.

Rahul Palaniappan Kanthabhabha Jeya, Abdel-Hakim Bouzid. 2019. « Effect of thermal ratcheting on the mechanical properties of Teflon and fiber based gasket materials ». Journal of Applied Polymer Science. vol. 136 , nº 13. 9 p.

Abdel-Hakim Bouzid, Ali Salah Omar Aweimer. 2019. « On the use of gas flow models to predict leak rates through sheet gasket materials ». Journal of Pressure Vessel Technology. vol. 141 , nº 5.

Abdel-Hakim Bouzid, Mohammad Pourreza. 2019. « Analysis of residual stresses in the transition zone of tube-to-tubesheet joints ». Journal of Pressure Vessel Technology. vol. 141 , nº 4.

Valentin Fort, Abdel-Hakim Bouzid, Michel Gratton. 2019. « Analytical modeling of self-loosening of bolted joints subjected to transverse loading ». Journal of Pressure Vessel Technology. vol. 141 , nº 3.

Linbo B. Zhu, Abdel-Hakim Bouzid, Jun Hong, Zaoxiao Zhang. 2018. « Elastic interaction in bolted flange joints: An analytical model to predict and optimize bolt load ». Journal of Pressure Vessel Technology. vol. 140 , nº 4. p. 10.

Linbo Zhu, Abdel-Hakim Bouzid, Jun Hong. 2018. « Analytical evaluation of elastic interaction in bolted flange joints ». International Journal of Pressure Vessels and Piping. vol. 165 p. 176-184.

Rahul Kanthabhabha Jeya, Abdel-Hakim Bouzid. 2018. « Compression creep and thermal ratcheting behavior of High Density Polyethylene (HDPE) ». Polymers. vol. 10 , nº 2.

Mehdi Kazeminia, Abdel-Hakim Bouzid. 2018. « Leak prediction through porous compressed packing rings: A comparison study ». International Journal of Pressure Vessels and Piping. vol. 166 p. 1-8.

Ibai Coria, Iñigo Morales Martín, Abel-Hakim Bouzid, Iker Heras, Mikel Abasolo. 2018. « Efficient assembly of bolted joints under external loads using numerical FEM ». International Journal of Mechanical Sciences. vol. 142-143 p. 575-582.

Abdel-Hakim Bouzid, L.inbo Zhu. 2018. « A study of neighbouring tube expansion effect on the residual contact pressure of tube-to-tubesheet joints ». International Journal of Pressure Vessels and Piping. vol. 165 p. 185-192.

Palaniappan Rahul Kanthabhabha Jeya, Abdel-Hakim Bouzid. 2017. « Creep and thermal ratcheting characterization of polytetrafluoroethylene-based gasket materials ». Advanced Materials proceeding. vol. 2 , nº 10. p. 609-614.

Linbo Zhu, Abdel-Hakim Bouzid, Jun Hong. 2017. « Numerical and experimental study of elastic interaction in bolted flange joints ». Journal of Pressure Vessel Technology. vol. 139 , nº 2. 7 p.

Mehdi Kazeminia, Hakim Bouzid. 2017. « Evaluation of leakage through graphite-based compression packing rings ». Journal of Pressure Vessel Technology. vol. 139 , nº 1.

M. Daoud, J. F. Chatelain, A. Bouzid. 2017. « Effect of rake angle-based Johnson-Cook material constants on the prediction of residual stresses and temperatures induced in Al2024-T3 machining ». International Journal of Mechanical Sciences. vol. 122 p. 392-404.

Sébastien Demers, Sylvie Nadeau, Abdel-Hakim Bouzid. 2017. « Analytical evaluation of stresses and displacements of an intervertebral disc ». Journal of Biomechanical Science and Engineering. vol. 12 , nº 3. 16 p.

Hocine Attoui, Abdel-Hakim Bouzid, Jerry A. Waterland. 2016. « On the buckling of spiral wound gaskets ». Journal of Pressure Vessel Technology. vol. 138 , nº 4. 7 p.

Abdel-Hakim Bouzid, Mehdi Kazeminia. 2016. « Effect of reverse yielding on the residual contact pressure in tube-to-tubesheet joints ». Journal of Pressure Vessel Technology. vol. 138 , nº 6. 9 p.

Abdel-Hakim Bouzid, Nor-Eddine Laghzale. 2016. « Analytical modeling of tube-to-tubesheet joints subjected to plastic deformation and creep ». Journal of Advanced Mechanical Design, Systems and Manufacturing. vol. 10 , nº 4. 13 p.

Abdel-Hakim Bouzid, Abdel-Hamid I. Mourad, Aly El Domiaty. 2016. « Influence of Bauschinger effect on the residual contact pressure of hydraulically expanded tube-to-tubesheet joints ». International Journal of Pressure Vessels and Piping. vol. 146 p. 1-10.

Noreddine Laghzale, Hakim Bouzid. 2016. « Analytical modelling of elastic-plastic interference fit joints ». International Review on Modelling and Simulations. vol. 9 , nº 3. p. 191-199.

Sébastien Demers, Abdel-Hakim Bouzid, Sylvie Nadeau. 2016. « Effect of Sharpey's fibers on the stress distribution in the anulus fibrosus of an intervertebral disc subjected to compression ». International Review on Modelling and Simulations. vol. 9 , nº 6. p. 414-426.

Sébastien Demers, Sylvie Nadeau, Abdel-Hakim Bouzid. 2016. « Anisotropic multishell analytical modeling of an intervertebral disk subjected to axial compression ». Journal of Biomechanical Engineering. vol. 138 , nº 4. 10 p.

Hakim Bouzid, S. Benabdallah. 2015. « Characterization of PTFE-based gaskets at high temperature ». Journal of Pressure Vessel Technology. vol. 137 , nº 3. 7 p.

A. H. Bouzid, A. H. I. Mourad, A. El Domiaty. 2015. « Impact of Bauschinger effect on the residual contact pressure of hydraulically expanded tube-to-tubesheet joints ». Procedia Engineering. vol. 130 p. 176-192.

Mehdi Kazeminia, Abdel-Hakim Bouzid. 2015. « Prediction of gas flow in compressible and low permeability porous media ». Journal of Fluid Science and Technology. vol. 10 , nº 2. 12 p.

Mehdi Kazeminia, Hakim Bouzid. 2015. « Stress analysis of packed stuffing-boxes ». Journal of Pressure Vessel Technology, Transactions of the ASME. vol. 137 , nº 5. 9 p.

M. Daoud, J. F. Chatelain, A. Bouzid. 2015. « Effect of rake angle on Johnson-Cook material constants and their impact on cutting process parameters of Al2024-T3 alloy machining simulation ». International Journal of Advanced Manufacturing Technology. vol. 81 , nº 9-12. p. 1987-1997.

M. Daoud, W. Jomaa, J. F. Chatelain, A. Bouzid. 2015. « A machining-based methodology to identify material constitutive law for finite element simulation ». International Journal of Advanced Manufacturing Technology. vol. 77 , nº 9-12. p. 2019-2033.

Abdel-Hakim Bouzid. 2014. « Comparative study of bolt spacing formulas used in bolted joint designs ». International Journal of Pressure Vessels and Piping. vol. 120-121 , nº 1. p. 47-54.

Adbel-Hakim Bouzid. 2014. « Failure analysis of an aluminium extension portable ladder ». Materials Sciences and Applications. vol. 5 , nº 9. p. 674-684.

Tan Dan Do, Abdel-Hakim Bouzid, Thien-My Dao. 2014. « Development of a new bolt spacing formula ». Journal of Pressure Vessel Technology. vol. 136 , nº 1.

Lotfi Grine, Abdel-Hakim Bouzid. 2013. « Analytical and experimental studies of liquid and gas leaks through micro and nano-porous gaskets ». Materials Sciences and Applications. vol. 4 , nº 8A. p. 32-44.

Lotfi Grine, Abdel-Hakim Bouzid. 2013. « Prediction of leak rates through porous gaskets at high temperature ». Journal of Pressure Vessel Technology. vol. 135 , nº 2.

Sébastien Demers, Abdel-Hakim Bouzid, Sylvie Nadeau. 2013. « On the modeling of an intervertebral disc using a novel large deformation multi-shell approach ». Journal of Biomechanical Engineering. vol. 135 , nº 5.

Nazim Ould-Brahim, Abdel-Hakim Bouzid, Vladimir Brailovski. 2013. « On the use of shape memory alloy studs to recover load loss in bolted joints ». Journal of Pressure Vessel Technology. vol. 135 , nº 2.

Mohammed Diany, Abdel-Hakim Bouzid. 2012. « Creep constitutive law of packing materials based on relaxation tests ». Journal of Tribology. vol. 134 , nº 1. 8 p.

Tan Dan Do, Hakim Bouzid, Thien-My Dao. 2012. « On the Use of Theory of Rings on Nonlinear Elastic Foundation to Study the Effect of Bolt Spacing in Bolted Flange Joints ». Journal of Pressure Vessel Technology. vol. 134 , nº 6. 8 p.

Natalia Petrova, Abdel-Hakim Bouzid. 2012. « Deflections of a multipass shell-and-tube heat exchanger bolted joint subjected to nonaxisymmetric thermal loading ». Journal of Pressure Vessel Technology. vol. 134 , nº 1. 9 p.

Lotfi Grine, Hakim Bouzid. 2011. « Correlation of gaseous mass leak rates through micro- and nanoporous gaskets ». Journal of Pressure Vessel Technology. vol. 133 , nº 2. 6 p.

Lotfi Grine, Hakim Bouzid. 2011. « Liquid leak predictions in micro- and nanoporous gaskets ». Journal of Pressure Vessel Technology. vol. 133 , nº 5. 6 p.

Hakim Bouzid, Hichem Galai. 2011. « A new approach to model bolted flange joints with full face gaskets ». Journal of Pressure Vessel Technology. vol. 133 , nº 2. 7 p.

S. Demers, Sylvie Nadeau, Abdel-Hakim Bouzid. 2011. « Étude analytique des zones critiques du disque intervertébral L5-S1 soumis à une compression quasi statique ». Travail et Santé. vol. 27 , nº 4. p. 23.

Mohammed Diany, Hakim Bouzid. 2011. « An experimental-numerical procedure for stuffing box packing characterization and leak tests ». Journal of Tribology. vol. 133 , nº 1. 8 p.

Tan Dan Do, Hakim Bouzid, Thien-My Dao. 2011. « Effect of bolt spacing on the circumferential distribution of the gasket contact stress in bolted flange joints ». Journal of Pressure Vessel Technology. vol. 133 , nº 4. 10 p.

Hichem Galai, Hakim Bouzid. 2010. « Analytical modeling of flat face flanges with metal-to-metal contact beyond the bolt circle ». Journal of Pressure Vessel Technology, Transactions of the ASME. vol. 132 , nº 6. p. 0612071-0612078.

Hakim Bouzid, Akli Nechache. 2010. « The modelling of bolted flange joints used with disc springs and tube spacers to reduce relaxation ». International Journal of Pressure Vessels and Piping. vol. 87 , nº 12. p. 730-736.

Nor Eddine Laghzale, Hakim Bouzid. 2010. « Effect of creep on the residual stresses in tube-to-tubesheet joints ». Journal of Pressure Vessel Technology, Transactions of the ASME. vol. 132 , nº 6. p. 0612101-0612106.

Hakim Bouzid. 2009. « On the effect of external bending loads in bolted flange joints ». Journal of Pressure Vessel Technology. vol. 131 , nº 2.

Nor Eddine Laghzale, Hakim Bouzid. 2009. « Analytical modeling of hydraulically expanded tube-to-tubesheet joints ». Journal of Pressure Vessel Technology. vol. 131 , nº 1.

Nor Eddine Laghzale, Hakim Bouzid. 2009. « Theoretical analysis of hydraulically expanded tube-to-tubesheet joints with linear strain hardening material behavior ». Journal of Pressure Vessel Technology. vol. 131 , nº 6.

Mohammed Diany, Hakim Bouzid. 2009. « Analytical evaluation of stresses and displacements of stuffing-box packing based on a flexibility analysis ». Tribology International. vol. 42 , nº 6. p. 980-986.

Mohammed Diany, Hakim Bouzid. 2009. « Short term relaxation modeling of valve stem packings ». Journal of Tribology. vol. 131 , nº 3.

Sylvie Nadeau, Hakim Bouzid, David Prud’homme. 2008. « Étude du mécanisme lésionnel de la hernie discale : modélisation du comportement élastique non linéaire ». Revue Internationale sur l’Ingénierie des Risques Industriels. vol. 1 , nº 1. p. 46-64.

Akli Nechache, Abdel-Hakim Bouzid. 2008. « On the use of plate theory to evaluate the load relaxation in bolted flanged joints subjected to creep ». International Journal of Pressure Vessels and Piping. vol. 85 , nº 7. p. 486-497.

Akli Nechache, Abdel-Hakim Bouzid. 2008. « The effect of cylinder and hub creep on the load relaxation in bolted flanged joints ». Journal of Pressure Vessel Technology. vol. 130 , nº 3. p. 031211 (9 p.).

Akli Nechache, Abdel-Hakim Bouzid. 2007. « Creep analysis of bolted flange joints ». International Journal of Pressure Vessels and Piping. vol. 84 , nº 3. p. 185-194.

A. Bouzid, M. Diany, M. Derenne. 2006. « Determination of gasket effective width for the ASME proposed flange design rules ». Welding Research Council Bulletin. p. 1-43.

O. Sakr, A. Bouzid, M. Derenne. 2006. « 3D-finite element modelling of bolted flanged joints subjected to external bending loads ». Welding Research Council Bulletin. p. 1-56.

O. Sakr, A. Bouzid, M. Derenne. 2006. « Development of a transducer for measuring gasket contact stress in bolted flanged joints ». Welding Research Council Bulletin. p. 57-85.

Hakim Bouzid, A. Nechache. 2005. « An analytical solution for evaluating gasket stress change in bolted flange connections subjected to high temperature loading ». Journal of Pressure Vessel Technology. vol. 127 , nº 4. p. 414-421.

Hakim Bouzid, A. Nechache. 2005. « Thermally induced deflections in bolted flanged connections ». Journal of Pressure Vessel Technology. vol. 127 , nº 4. p. 394-401.

Luc Marchand, Michel Derenne, Olivier Sakr, Hakim Bouzid. 2005. « Long term pressurized graphite gasketed joint tests ». Welding Research Council Bulletin. p. 1-14.

Hakim Bouzid, Michel Derenne. 2004. « Effect of gasket width and gasket diameter on tightness performance, gasket constants and emissions : an exploratory experimental investigation ». Welding Research Council Bulletin. p. 24-38.

Hakim Bouzid, Michel Derenne, Yves Birembaut. 2004. « Effect of gasket width on tightness performance gasket constants and emissions ». Welding Research Council Bulletin. p. 39-50.

Hakim Bouzid, Michel Derenne, Marwan El-Rich. 2004. « Effect of flange rotation and gasket width on leakage behavior of bolted flanged joints ». Welding Research Council Bulletin. p. 1-23.

Abdel-Hakim Bouzid, Henri Champliaud. 2004. « Contact stress evaluation of nonlinear gaskets using dual kriging interpolation ». Journal of Pressure Vessel Technology. vol. 126 , nº 4. p. 445-450.

Hakim Bouzid, Michel Derenne, Luc Marchand. 2003. « Long duration mechanical performance of PTFE based gasket materials ». Welding Research Council Bulletin. p. 12-22.

O. Sakar, A. Bouzid, M. Derenne, L. Marchand, U. Muzzo. 2003. « Gasketed joint emissions and leakage : WRC Bulletin 484 - August 2003 ». Welding Research Council, Progress Reports. vol. 58 , nº 11-12. 36 p.

Olivier Sakr, Hakim Bouzid, Michel Derenne, Luc Marchand. 2003. « Correlation between PPMV and mass leakage rate of gasketing products ». Welding Research Council Bulletin. p. 1-11.

Yves Birembaut, Thierry Ledauphin, Vincent Masi, Hakim Bouzid, Michel Derenne, Pascal Martelli-Garon. 2002. « Part 1: The effects of bending moments on bolted gasketed joints ». Welding Research Council Bulletin. p. 1-17.

Abdel-Hakim Bouzid, Michel Derenne. 2002. « Analytical modeling of the contact stress with nonlinear gaskets ». Journal of Pressure Vessel Technology. vol. 124 , nº 1. p. 47-53.

Abdel-Hakim Bouzid, Akli Nechache, Warren Brown. 2002. « The effect of steady state thermal loading on the deflections of a flanged joint with a cover plate ». Welding Research Council, Progress Reports. vol. 57 , nº 7-8. p. 99-108.

Abdel-Hakim Bouzid, Michel Derenne, L. Marchand, J. R. Payne. 2001. « Service temperature characterization of polytetrafluoroethylene-based gaskets ». Journal of Testing and Evaluation. vol. 29 , nº 5. p. 442-452.

N. Mammeri, d. L. Piron, Hakim A. Bouzid, Michel Derenne, Luc Marchand, Yves Birembaut. 2000. « Corrosion quantification test for flanges with graphite-based gaskets ». Materials Performance. vol. 39 , nº 4. p. 64-69.

A. Bouzid, A. Chaaban. 1997. « An accurate method of evaluating relaxation in bolted flanged connections ». Journal of Pressure Vessel Technology. vol. 119 , nº 1. p. 10-17.

A. Bouzid, A. Chaaban, A. Bazergui. 1995. « Effect of gasket creep-relaxation on the leakage tightness of bolted flanged joints ». Journal of Pressure Vessel Technology. vol. 117 , nº 1. p. 71-78.

A. Bouzid, A. Chaaban. 1993. « Flanged joint analysis: a simplified method based on elastic interaction ». Transactions of the Canadian Society for Mechanical Engineering. vol. 17 , nº 2. p. 181-196.

Conference report (94)

Mohamed Esouilem, Abdel-Hakim Bouzid, Sylvie Nadeau. 2019. « Safety and risk management analysis of accidents related to pressure vessels and piping in alberta petrochemical industry from 2008 to 2017 ». Pressure Vessels and Piping Conference (PVP) 2019 (San Antonio, TX, USA, July 14-19, 2019)

Ali Salah Omar Aweimer, Abdel-Hakim Bouzid. 2018. « Experimental investigation of interfacial and permeation leak rates in sheet gaskets and valve stem packing ». ASME 2018 Pressure Vessels and Piping Conference (PVP 2018) (Prague, Czech Republic, July 15-20, 2018) ASME.

Ali Salah Omar Aweimer, Abdel-Hakim Bouzid, Zijian Zhao. 2018. « Prediction of leak rates through porous materials using analytical and numerical approaches ». ASME 2018 International Mechanical Engineering Congress and Exposition (Pittsburgh, PA, USA, Nov. 9-15, 2018) ASME.

A. Bouzid, V. Songmene, J. P. Kenné. 2018. « Bavures d'usinage et ébavurage : Méthode de sélection des procédés et allocation optimale des machines ». 7th International Metrology Conference – CAFMET 2018 (Marrakech, Maroc, Apr. 09-12, 2018) p. 294-300. Comite Africain de Metrologie.

Rahul Palaniappan Kanthabhabha Jeya, Abdel-Hakim Bouzid. 2018. « Influence of thermal ratcheting on the creep and mechanical properties of High Density Polyethylene (HDPE) ». ASME 2018 International Mechanical Engineering Congress and Exposition (Pittsburgh, PA, USA, Nov. 9-15, 2018) ASME.

I. Coria, I. Martin, A. H. Bouzid, I. Heras, M. Abasolo. 2018. « FEM superelement technique applied to oil and gas bolted flange connections ». 24th International Conference on Fluid Sealing, March 7, 2018 - March 8, 2018 (Manchester, United kingdom, March 7-8, 2018) p. 105-115. United kingdom : BHR Group Limited.

Ibai Coria, Iñigo Martín, Hakim Bouzid, Iker Heras, Josu Aguirrebeitia. 2018. « Optimized bolt tightening sequences in bolted joints using superelement FE modeling technique ». 37th International Conference on Ocean, Offshore and Arctic Engineering (Madrid, Spain, June 17-22, 2018) ASME.

Abdel-Hakim Bouzid, Mohammad Pourreza. 2018. « Analytical evaluation of residual stresses in the transition zone of expanded tube-to-tubesheet joints ». ASME 2018 Pressure Vessels and Piping Conference (PVP 2018) (Prague, Czech Republic, July 15-20, 2018) ASME.

Linbo Zhu, Yifei Hou, Abdel-Hakim Bouzid, Jun Hong. 2018. « On the design of contact member surface shape of bolted joints to minimize clamping load loss ». ASME 2018 Pressure Vessels and Piping Conference (PVP 2018) (Prague, Czech Republic, July 15-20, 2018) ASME.

Valentin Fort, Abdel-Hakim Bouzid, Michel Gratton. 2018. « Analytical modeling of self-loosening of bolted joints ». ASME 2018 Pressure Vessels and Piping Conference (PVP 2018) (Prague, Czech Republic, July 15-20, 2018) ASME.

Ali Salah Omar Aweimer, Abdel-Hakim Bouzid, Mehdi Kazeminia. 2017. « Leak rates of gasses through packing seals with different analytical approaches ». ASME 2017 Pressure Vessels and Piping Conference (PVP 2017) (Waikoloa, HI, USA, July 16-20, 2017) American Society of Mechanical Engineers (ASME).

Ali K. Vafadar, Abdel-Hakim Bouzid, Anh Dung Ngô. 2017. « Effect of material anisotropy on the structural integrity of composite bolted flanged joints ». ASME 2017 Pressure Vessels and Piping Conference (PVP 2017) (Waikoloa, HI, USA, July 16-20, 2017) American Society of Mechanical Engineers (ASME).

Pauline Wyckaert, Sylvie Nadeau, Hakim Bouzid. 2017. « Analysis of risks of pressure vessels ». Gesellschaft für Arbeitswissenschaft : Soziotechnische Gestaltung des digitalen Wandels – kreativ, innovativ, sinnhaft (Zurich, Suisse, Fev. 15-17, 2017) GFA Press.

Palaniappan Rahul Kanthabhabha Jeya, Zijan Zhao, Abdel-Hakim Bouzid. 2017. « HDPE and PVC creep and thermal ratcheting behavior under compression ». 21st International Conference on Composite Materials (Xi'an, China, Aug. 20-25, 2017) ICCM21.

Rahul Palaniappan Kanthabhabha Jeya, Abdel-Hakim Bouzid. 2017. « Characterisation of polytetrafluoroethylene and fiber based gaskets under creep and thermal ratcheting ». ASME 2017 Pressure Vessels and Piping Conference (PVP 2017) (Waikoloa, HI, USA, July 16-20, 2017) American Society of Mechanical Engineers (ASME).

Rahul Palaniappan Kanthabhabha Jeya, Abdel-Hakim Bouzid. 2017. « Creep and thermal ratcheting characterization of polytetrafluoroethylene-based gasket materials ». World Congress on Advances in Structural Engineering an Mechanics (ASEM 17), The 2017 International Conference onSteel and Composite Structures (ICSCS17) (Ilsan (Seoul), Korea, Aug. 28 - Sept. 01, 2017) IASEM Conferences.

Zijian Zhao, Rahul Palaniappan Kanthabhabha Jeya, Abdel-Hakim Bouzid. 2017. « Creep modeling of polyvinyl chloride bolted flange joints ». ASME 2017 International Mechanical Engineering Congress and Exposition (IMECE 2017) (Tampa, FL, USA, Nov. 03-09, 2017) American Society of Mechanical Engineers.

Linbo Zhu, Abdel-Hakim Bouzid, Jun Hong. 2017. « Analytical modelling of elastic interaction in bolted flange gasketed joints ». ASME 2017 Pressure Vessels and Piping Conference (PVP 2017) (Waikoloa, HI, USA, July 16-20, 2017) American Society of Mechanical Engineers (ASME).

Abdel-Hakim Bouzid, Ali Salah Omar Aweimer. 2017. « On the use of gas flow models to predict leak rates through sheet gasket materials ». ASME 2017 International Mechanical Engineering Congress and Exposition (Tampa Bay, Fl, USA, Nov. 03-09, 2017) ASME.

Hocine Attoui, Abdel-Hakim Bouzid. 2016. « On the equivalent mechanical properties of spiral wound gaskets ». ASME 2016 Pressure Vessels and Piping Conference (PVP) (Vancouver, BC, Canada, July 17-21, 2016) American Society of Mechanical Engineers (ASME).

Linbo Zhu, Abdel-Hakim Bouzid, Jun Hong. 2016. « Numerical and experimental study of elastic interaction in bolted flange joints ». ASME 2016 Pressure Vessels and Piping Conference (PVP) (Vancouver, BC, Canada, July 17-21, 2016) American Society of Mechanical Engineers (ASME).

M. Kazeminia, A. H. Bouzid. 2016. « Predicting leakage in packed stuffing boxes ». 23rd International Conference on Fluid Sealing 2016 (Manchester, UK, Mar. 2-3, 2016) p. 45-59. BHR Group.

Mehdi Kazeminia, Abdel-Hakim Bouzid. 2016. « Characterization and modeling of time-dependent behaviour of braided packing rings ». ASME 2016 Pressure Vessels and Piping Conference (PVP) (Vancouver, BC, Canada, July 17-21, 2016) American Society of Mechanical Engineers (ASME).

Abdel-Hakim Bouzid, Linbo Zhu. 2016. « Effect of adjacent tube expansion on the residual contact pressure of tube-to-tubesheet joints ». ASME 2016 Pressure Vessels and Piping Conference (PVP) (Vancouver, BC, Canada, July 17-21, 2016) American Society of Mechanical Engineers (ASME).

Abdel-Hakim Bouzid. 2015. « Safety and reliability assessment of a miniature steam generator ». Proceedings 19th Triennial Congress of the International Ergonomics Association (Melbourne, Australia, Aug. 9-14, 2015) International Ergonomics Association.

Mehdi Kazeminia, Abdel-Hakim Bouzid. 2015. « On the modeling of gas flow through porous compression packings used in valve stuffing-boxes ». ICONE 2015 - 23rd International Conference on Nuclear Engineering: Nuclear Power - Reliable Global Energy (Makuhari, Chiba, Japan, May 17-21, 2015) American Society of Mechanical Engineers (ASME).

Mehdi Kazeminia, Abdel-Hakim Bouzid. 2015. « Prediction of leak rates in porous braided packing rings ». ASME 2015 Pressure Vessels and Piping Conference. (Boston, MA, USA, July 19-23, 2015) American Society of Mechanical Engineers.

N. Laghzale, A. Bouzid, A. Elgharad. 2015. « L’effet de l’interférence sur un assemblage fretté dans le domaine plastique ». 22ème Congrès Français de Mécanique (Lyon, France, 24-28 août 2015) Association Française de Mécanique.

Abdel-Hakim Bouzid, Mehdi Kazeminia. 2015. « Effect of reverse yielding on the residual contact stresses of tube-to-tubesheet joints subjected to hydraulic expansion ». ASME 2015 Pressure Vessels and Piping Conference (Boston, MA, USA, July 19-23, 2015) American Society of Mechanical Engineers.

Aly El Domiaty, Abdel-Hamid Mourad, Abdel-Hakim Bouzid. 2015. « A proposed generalized model for forming limit diagram ». ASME 2015 Pressure Vessels and Piping Conference (Boston, MA, USA, July 19–23, 2015) American Society of Mechanical Engineers (ASME).

Hocine Attoui, Hakim Bouzid, Jerry A. Waterland. 2014. « Buckling and lateral pressures in spiral wound gaskets ». American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Anaheim, CA, USA, July 20-24, 2014) American Society of Mechanical Engineers (ASME).

Mehdi Kazeminia, Abdel-Hakim Bouzid. 2014. « Analysis of stresses and strains in packed stuffing-boxes ». American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Anaheim, CA, USA, July 20-24, 2014) American Society of Mechanical Engineers (ASME).

Mehdi Kazeminia, Abdel-Hakim Bouzid. 2014. « Analytical and numerical evaluation of the axial stress distribution of two soft-packed stuffing-box configurations ». ASME Turbo Expo 2014: Turbine Technical Conference and Exposition (Düsseldorf, Germany, June 16-20, 2014) p. V03BT25A005. ASME.

Mehdi Kazeminia, Abdel-Hakim Bouzid. 2014. « Effect of tapered housing on the axial stress distribution in a stuffing box pack ». International Conference on Advances in Mechanical and Automation Engineering-MAE 2014 (Rome, Italy, June 7-8, 2014) p. 20-25. Santa Barbara, CA, USA : Institute of Research Engineers and Doctors.

M. Daoud, W. Jomaa, Jean-François Chatelain, Abdel-Hakim Bouzid, Victor Songmene. 2014. « Identification of material constitutive law constants using machining tests: A response surface methodology based approach ». 2014 International Conference on High Performance and Optimum Design of Structures and Materials, HPSM 2014 which incorporated the Seminar on Optimum Design in Engineering, OPTI 2014 (Ostend, Belgium, June 9-11, 2014) p. 25-36. WITPress.

Monzer Daoud, Jean-François Chatelain, Hakim Bouzid. 2014. « On the effect of Johnson Cook material constants to simulate Al2024-T3 machining using finite element modeling ». ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014) American Society of Mechanical Engineers (ASME).

Abdel-Hakim Bouzid. 2013. « Failure investigation of an aluminum extension portable ladder ». Chancen durch Arbeits-, Produkt- und Systemgestaltung - Zukunftsfähigkeit für Produktions- und Dienstleistungsunternehmen : 27.02. bis 01.03.2013, Krefeld (Krefeld, Germany, Feb. 27-Mar. 1, 2013) p. 295-300. Dortmund, Germany : GfA-Press.

Abdel-Hakim Bouzid, Samir Benabdallah. 2013. « On the hot blow-out characterization of PTFE-based gasket materials ». American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Paris, France, July 14-18, 2013) New York, NY, USA : American Society of Mechanical Engineers.

S. Demers, Sylvie Nadeau, Hakim Bouzid. 2013. « On the use of multishell theory to model herniated discs ». Dokumentation des 59. Arbeitswissenschaftlichen Kongresses Krefeld 27.02.-01.03.2013 (Krefeld, Germany, Feb. 27-Mar. 1, 2013) p. 371-374. Dortmund, Germany : GfA-Press.

Sébastien Demers, Abdel-Hakim Bouzid, Sylvie Nadeau. 2013. « Développement d'un modèle analytique pour l'étude des contraintes d'un disque intervertebral soumis à une compression axiale ». CIRI 2013, 3ème Congrès international sur l'ingénierie des risques industriels (Reims, France, 3-5 juil. 2013) Reims, France : Université de Reims Champagne-Ardenne.

Sébastien Demers, Sylvie Nadeau, Hakim Bouzid. 2013. « Analytical anisotropic multi-shell model of a simplified intervertebral disc subjected to axial compression ». ASME 2013 Summer Bioengineering Conference (SBC) (Sunriver, OR, USA, June 26-29, 2013) New York, NY, USA : American Society of Mechanical Engineers.

Lotfi Grine, Abdel-Hakim Bouzid. 2012. « Prediction of leak rates through porous gaskets at high temperature ». ASME 2012 Pressure Vessels and Piping Conference, PVP 2012 (Toronto, ON, Canada, July 15-19, 2012) p. 215-221. New York, N.Y., USA : American Society of Mechanical Engineers.

Do Tan Dan, Abdel-Hakim Bouzid, Thien-My Dao. 2012. « On the development of a new bolt spacing formula ». ASME 2012 Pressure Vessels and Piping Conference, PVP 2012 (Toronto, ON, Canada, July 15-19, 2012) p. 131-138. New York, N.Y., USA : American Society of Mechanical Engineers.

S. Demers, Hakim Bouzid, Sylvie Nadeau. 2012. « Stress analysis of the intervertebral disc using a developed multi-shell model ». Twelfth Pan American Congress of Applied Mechanics (PACAM XII) (Trinidad, Spain, Jan. 2-6, 2012)

Sébastien Demers, Abdel-Hakim Bouzid, Sylvie Nadeau. 2012. « Analytical and finite element multi-shell modelling of an intervertebral disc ». ASME 2012 Pressure Vessels and Piping Conference, PVP 2012 (Toronto, ON, Canada, July 15-19, 2012) p. 25-36. New York, N.Y., USA : American Society of Mechanical Engineers.

Mohammed Diany, Abdel-Hakim Bouzid. 2011. « Creep constitutive law of packing materials based on relaxation tests ». ASME Pressure Vessels and Piping Conference (PVP) (Baltimore, Maryland, USA, July 17-21, 2011) p. 217-225. ASME.

N. Ould-Brahim, Abdel-Hakim Bouzid, Vladimir Brailovski. 2011. « Characteristics of a bolted joint with a shape memory alloy stud ». 5th International Conference on Computational Methods and Experiments in Materials Characterisation (MC) (Malta, July 13-15, 2011) p. 339-347. United Kingdom : WITPress.

Nazim Ould-Brahim, Abdel-Hakim Bouzid, Vladimir Brailovski. 2011. « Load recovery of a bolted joint with a shape memory alloy stud ». ASME Pressure Vessels and Piping Conference (PVP) (Baltimore, Maryland, USA, July 17-21, 2011) p. 321-328. ASME.

Lotfi Grine, Abdel-Hakim Bouzid. 2010. « Liquid leak predictions in micro and nano-porous gaskets ». ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference (Bellevue, WA, USA, July 18-22, 2010) p. 627-633. ASME.

Walter Lee, Abdel-Hakim Bouzid, James Huang. 2010. « Qualification of gasket performance for vacuum applications ». ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference (Bellevue, WA, USA, July 18-22, 2010) p. 307-316. ASME.

Sébastien Demers, Hakim A. Bouzid, Sylvie Nadeau. 2010. « La hernie discale: mieux la comprendre pour mieux la prévenir ». Congrès AQHSST 2010 (Lévis, QC, Canada, 12-14 mai 2010) Association québécoise pour l'hygiène, la santé et la sécurité du travail.

Mohammed Diany, Abdel-Hakim Bouzid. 2010. « An experimental-numerical procedure for stuffing box packing characterization ». ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference (Bellevue, WA, USA, July 18-22, 2010) p. 183-189. ASME.

Tan Dan Do, Hakim Bouzid, Thien-My Dao. 2010. « On the use of the theory of rings on non-linear elastic foundation to study the effect of bolt spacing in bolted flange joints ». ASME Pressure Vessel & Piping Conference (PVP) (Bellevue, Washington, July 18-22, 2010) p. 617-625. New York, NY, USA : American Society of Mechanical Engineers.

Natalia Petrova, Abdel-Hakim Bouzid. 2010. « Flanged joints of multi-pass shell-and-tube heat exchangers subjected to non-axisymmetric thermal loading ». ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference (Bellevue, WA, USA, July 18-22, 2010) p. 221-230. New York, NY, USA : American Society of Mechanical Engineers.

Hichem Galai, Hakim Bouzid. 2009. « Analytical modeling of flat face flanges with metal-to-metal contact beyond the bolt circle ». 2009 ASME Pressure Vessels and Piping Conference (PVP) (Prague, Czech republic, July 26-30, 2009) p. 315-323. New-York, NY, USA : American Society of Mechanical Engineers.

Lotfi Grine, Hakim Bouzid. 2009. « Correlation of gaseous mass leak rates through micro and nano-porous gaskets ». 2009 ASME Pressure Vessels and Piping Conference (PVP) (Prague, Czech republic, July 26-30, 2009) p. 41-47. New-York, NY, USA : American Society of Mechanical Engineers.

A. Fitzgerald Waterland III, Hakim Bouzid. 2009. « Analysis of the compression behavior of spiral wound gaskets ». 2009 ASME Pressure Vessels and Piping Conference (PVP) (Prague, Czech republic, July 26-30, 2009) p. 89-97. New-York, NY, USA : American Society of Mechanical Engineers.

Walter Lee, Hakim Bouzid, James Huang. 2009. « Factors affecting high temperature relaxation behaviors of expanded PTFE gaskets ». 2009 ASME Pressure Vessels and Piping Conference (PVP) (Prague, Czech republic, July 26- 30, 2009) p. 223-234. New-York, NY, USA : American Society of Mechanical Engineers.

Hakim Bouzid, Akli Nechache. 2008. « On the use of Belleville washers to reduce relaxation in bolted flange joints ». ASME Pressure Vessels and Piping Conference (PVP) (Chicago, IL, USA, Jul. 27-31, 2008) p. 3-10. New York, NY, USA : American Society of Mechanical Engineers.

Nor Eddine Laghzale, Abdel-Hakim Bouzid. 2008. « An analytical solution of hydraulically expanded tube-to-tubesheet joints with linear strain hardening material behaviour ». Proceedings of the ASME Pressure Vessels and Piping Conference (Chicago, IL, USA, July 27-31, 2008) p. 63-72. American Society of Mechanical Engineers.

D. Tan Dan, Hakim Bouzid, Thien-My Dao. 2008. « Effect of bolt spacing on the circumferential distribution of gasket contact stress in bolted flange joints ». 16th International Conference on Nuclear Engineering (ICONE) (Orlando, FL, USA, May 11-15, 2008) p. 207-216. New York, NY, USA : American Society of Mechanical Engineers.

Abdel-Hakim Bouzid, Yves Birembaut, Hubert Lejeune. 2007. « On the effect of external bending loads in bolted flange joints ». ASME Pressure Vessels and Piping Conference (PVP) (San Antonio, TX, USA, Jul. 22-26, 2007) p. 115-123. New York, NY, USA : American Society of Mechanical Engineers.

Nor Eddine Laghzale, Hakim Bouzid. 2007. « Analytical modeling of hydraulically expanded tube-to-tubesheet joints ». ASME Pressure Vessels and Piping Conference (PVP) (San Antonio, TX, USA, Jul. 22-26, 2007) p. 233-242. New York, NY, USA : American Society of Mechanical Engineers.

Sylvie Nadeau, Hakim Bouzid, D. Prud'Homme. 2007. « Étude du mécanisme lésionnel de la hernie discale : modélisation du comportement élastique non linéaire ». Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings (Montréal, QC, Canada, 17-19 déc. 2007) Montréal : École de technologie supérieure.

Sylvie Nadeau, Stéphane Hallé, S. Déry, P. Doucet, R. Gilbert, L. Gratton, Anh Dung Ngô, Jean Arteau, Hakim Bouzid, J. Brousseau, J. Dessureault, F. Gauthier, Frédéric Laville, P. Le-Huy, Françoise Marchand, Yvan Petit, D. Rodier, Marc Thomas. 2007. « Vers l'intégration de connaissances en santé et sécurité du travail en formation universitaire (génie mécanique) - une collaboration unique ». 24e Congrès de l’Association Internationale de Pédagogie Universitaire (AIPU) (Montréal, QC, Canada, 16-18 mai 2007) p. 96-100. Association Internationale de Pédagogie Universitaire (AIPU).

Mohammed Diany, Hakim Bouzid. 2007. « Short term relaxation of stuffing box packings ». ASME Pressure Vessels and Piping Conference (PVP) (San Antonio, TX, USA, Jul. 22-26, 2007) p. 159-164. New York, NY, USA : American Society of Mechanical Engineers.

Mohammed Diany, Hakim Bouzid. 2006. « Evaluation of contact stress in stuffing box packings ». ASME Pressure Vessels and Piping Conference (PVP) (Vancouver, Canada, Jul. 23-27, 2006) p. 87-92. New York, NY, USA : American Society of Mechanical Engineers.

Hakim Bouzid. 2005. « Bolted flange joints with full face gaskets : an analytical approach based on flexibility ». ASME Pressure Vessels and Piping Conference (PVP) (Denver, CO, USA, Jul. 17-21, 2005) p. 29-35. New York, NY, USA : American Society of Mechanical Engineers.

Henri Champliaud, Abdel-Hakim Bouzid. 2005. « Computation of unloading stiffness of nonlinear gaskets using dual kriging interpolation ». Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, Canada, Aug. 1-4, 2005) p. 127-138. Montréal, Qué., Canada : École de technologie supérieure.

M. Diany, Hakim Bouzid, M. Derenne. 2005. « On the validity and limits of the gasket effective width concept ». ASME Pressure Vessels and Piping Conference (PVP) (Denver, CO, USA, Jul. 17-21, 2005) p. 15-20. New York, NY, USA : American Society of Mechanical Engineers.

A. Nechache, Hakim Bouzid. 2005. « Creep effect of attached structures on bolted flanged joint relaxation ». ASME Pressure Vessels and Piping Conference (PVP) (Denver, CO, USA, Jul. 17-21, 2005) p. 207-215. New York, NY, USA : American Society of Mechanical Engineers.

Hichem Galai, Hakim Bouzid. 2004. « Analytical modeling of bolted flange joints with full face gaskets ». International Pipeline Conference (Calgary, AB, Canada, Oct. 4-8, 2004) p. 2731-2737. Calgary, AB, Canada : American Society of Mechanical Engineers.

Hakim A. Bouzid, Mohammed Diany, Michel Derenne. 2004. « Determination of gasket effective width based on leakage ». ASME/JSME Pressure Vessels and Piping Conference (PVP) (San Diego, CA, USA, Jul. 25-29, 2004) p. 105-111. New York, NY, USA : American Society of Mechanical Engineers.

Hakim A. Bouzid, Akli Nechache. 2004. « Creep modeling in bolted flange joints ». 2004 ASME/JSME Pressure Vessels and Piping Conference (PVP) (San Diego, CA, USA, Jul. 25-29, 2004) p. 49-56. USA : American Society of Mechanical Engineers.

Akli Nechache, Hakim A. Bouzid, Van Ngan Le. 2004. « Analytical modeling of a bolted flange joint subjected to creep relaxation ». 12th International Conference on Nuclear Engineering (ICONE) (Arlington, VA, USA, Apr. 25-29, 2004) p. 705-712. New York, NY, USA : American Society of Mechanical Engineers.

D. Prud'homme, Sylvie Nadeau, Hakim Bouzid. 2004. « Étude de mécanisme lésionnel de la hernie discale : modélisation du comportement viscoélastique ». 72e Congrès de l'ACFAS (Montréal, QC, Canada, 10-12 mai 2004)

Hakim A. Bouzid, Hichem Beghoul. 2003. « The design of flanges based on flexibility and tightness ». ASME Pressure Vessels and Piping Conference (PVP) (Cleveland, OH, USA, Jul. 20-24, 2003) p. 31-38. New York, NY, USA : American Society of Mechanical Engineers.

Hakim A. Bouzid, Henri Champliaud. 2003. « On the use of dual kriging interpolation for the evaluation of the gasket stress distribution in bolted joints ». Pressure Vessels and Piping Conference (PVP) (Cleveland, OH, USA, Jul. 20-24, 2003) p. 77-83. USA : American Society of Mechanical Engineers.

Hakim Bouzid, Hichem Beghoul. 2003. « A new proposed method for the design of bolted joints based on flexibility and tightness ». 10th International Conference on Pressure Vessel Technology (ICPVT-10) (Vienna, Austria, July 7-10, 2003) p. 293-301. Österreichische Gesellschaft für Schweißtechnik.

Hakim Bouzid, Van Ngan Lê. 2003. « Développement de deux séances de laboratoire pour les cours MEC728 et SYS865 ». Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2001-2002 : Actes (Montréal, QC, Canada, 11 juin 2002) p. 7-12.

S. Nadeau, H. A. Bouzid, J. P. Kenné. 2003. « Conception d'un convoyeur à bagages pour le chargement/déchargement des avions ». Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2002-2003 : Actes (Montréal, QC, Canada, 25 avril 2003) p. 67-72. École de technologie supérieure.

Sylvie Nadeau, Hakim Bouzid, Jean-Pierre Kenné. 2003. « L'enseignement par la méthode des cas en génie mécanique ». Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2001-2002 : Actes (Montréal, QC, Canada, 11 juin 2002) p. 13-16. École de technologie supérieure.

Akli Nechache, Hakim A. Bouzid. 2003. « The determination of load changes in bolted gasketed joints subjected to elevated temperature ». ASME Pressure Vessels and Piping Conference (PVP) (Cleveland, OH, USA, Jul. 20-24, 2003) p. 139-148. New York, NY, USA : American Society of Mechanical Engineers.

Hakim A. Bouzid, Akli Nechache, Warren Brown. 2002. « The effect of steady state thermal loading on the deflections of a flanged joint with a cover plate ». ASME Pressure Vessels and Piping Conference (PVP) (Vancouver, Canada, Aug. 5-9, 2002) p. 153-162. New York, NY, USA : American Society of Mechanical Engineers.

Warren Brown, Michel Derenne, Abdel-Hakim Bouzid. 2002. « Determination of gasket stress levels during thermal transients ». 2002 ASME Prssure Vessels and Piping Conference : Analysis of Bolted Joints (Vancouver, BC, Canada, Aug. 5-9, 2002) p. 21-28. Vancouver, BC, Canada : American Society of Mechanical Engineers.

Akli Nechache, Hakim A. Bouzid. 2002. « The redistribution of load in bolted gasketed joints subjected to steady state thermal loading ». 10th International Conference on Nuclear Engineering (ICONE) (Arlington, VA, USA, Apr. 14-18, 2002) p. 743-751. New York, NY, USA : American Society of Mechanical Engineers.

W. Brown, M. Derenne, A. Bouzid. 2001. « The effect of thermal loading of pressure vessel joints ». Journées d'Etudes Européennes sur les Equipements sous Pression: Paris, 23, 24, 25 octobre 2001, Hôtel Sofitel, Forum Rive Gauche = European Symposium on Pressure Equipment - ESOPE 2001 (Paris, France, Oct. 23-25, 2001) p. 416-425. Paris, France : Association Française des Ingénieurs en Appareils à Pression.

Warren Brown, Michel Derenne, Hakim A. Bouzid. 2001. « Determination of gasket stress levels during high temperature flange operation ». ASME Pressure Vessels and Piping Conference (PVP) (Atlanta, GA, USA, Jul. 22-26, 2001) p. 361-368. New York, NY, USA : American Society of Mechanical Engineers.

Warren Brown, Michel Derenne, Hakim A. Bouzid. 2001. « Determination of the mechanical and thermal properties of selected gasket types ». ASME Pressure Vessels and Piping Conference (PVP) (Atlanta, GA, USA, Jul. 22-26, 2001) p. 35-43. New York, NY, USA : American Society of Mechanical Engineers.

W. Brown, Michel Derenne, Abdel-Hakim Bouzid. 2000. « Determination of the Steady State Operating Temperature of Pressure Vessel Flange Components: Part 2 - Simplified Methods ». Proceedings of the 2000 ASME/PVP Conference (Seattle, WA, USA, ) p. 105-113.

Abdel-Hakim Bouzid, M. Derenne, L. Marchand, J. R. Payne. 2000. « Preventing PTFE Gasket Blow-Out ». Proceedings of the Ninth International Conference on Pressure Vessel Technology ICPVT-9 (Sydney, Australia, ) p. 393-401.

Warren Brown, Michel Derenne, Abdel-Hakim Bouzid. 2000. « Determination of the steady state operating temperature of pressure vessel flange components: part 1 - analytic methods ». Proceedings of the 2000 ASME/PVP Conference (Seattle, WA, USA, July 23-27, 2000) p. 95-104. American Society of Mechanical Engineers.

M. Derenne, L. Marchand, Abdel-Hakim Bouzid, J. R. Payne. 2000. « Long Term Elevated Temperature Performance of Reinforced Flexible Graphite Sheet Gaskets ». Proceedings of the Ninth International Conference on Pressure Vessel Technology ICPVT-9 (Sydney, Australia, ) p. 229-247.

O. Sakr, Abdel-Hakim Bouzid, M. Derenne, L. Marchand, J. R. Payne. 2000. « Correlation Between PPMV and Mass Leakage Rate of Gasketing Products ». Proceedings of the Ninth International Conference on Pressure Vessel Technology ICPVT-9 (Sydney, Australia, ) p. 369-381.

Chapter of book (16)

H. Bouzid, J. P. Kenné, S. Nadeau, T. Gowings. 2015. « Chapter 2: Case study : Designing a log splitter ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics . 2nd edition. p. 7-13. Cambridge Scholars Publishing.

H. Bouzid, S. Nadeau, J. P. Kenné. 2015. « Chapter 1: Case study : Gasket test rig ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics . 2nd edition. p. 1-6. Cambridge Scholars Publishing.

H. Bouzid, S. Nadeau, J. P. Kenné, C. Giner-Morency. 2015. « Chapter 4: Case study : Designing a hydraulic car lift for small auto repair shops ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics . 2nd edition. p. 26-36. Cambridge Scholars Publishing.

H. Bouzid, S. Nadeau, J. P. Kenné, T. Gowings, C. Giner-Morency. 2015. « Chapter 5: Case study : Designing a boom lift ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics . 2nd edition. p. 37-55. Cambridge Scholars Publishing.

J. P. Kenné, H. Bouzid, S. Nadeau, C. Giner-Morency. 2015. « Chapter 14: Case study : Designing a lift truck ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics . 2nd edition. p. 122-128. Cambridge Scholars Publishing.

J. P. Kenné, H. Bouzid, S. Nadeau, C. Giner-Morency. 2015. « Chapter 6: Case study : Designing an aerial work platform vehicle ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics . 2nd edition. p. 54-63. Cambridge Scholars Publishing.

J. P. Kenné, S. Nadeau, H. Bouzid, C. Giner-Morency. 2015. « Chapter 12: Case study: automated overhead crane ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics . 2nd edition. p. 105-113. Cambridge Scholars Publishing.

S. Nadeau, H. Bouzid, J. P. Kenné, C. Giner-Morency. 2015. « Chapter 13: Designing an airplane baggage belt loader ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics . 2nd edition. p. 114-121. Cambridge Scholars Publishing.

Hakim Bouzid, Jean-Pierre Kenné, Sylvie Nadeau. 2010. « Case study : designing a log splitter ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics . p. 7-13. Cambridge Scholars Publishing.

Hakim Bouzid, Sylvie Nadeau, Jean-Pierre Kenné. 2010. « Case study : designing a boom lift ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics . p. 36-53. Cambridge Scholars Publishing.

Hakim Bouzid, Sylvie Nadeau, Jean-Pierre Kenné. 2010. « Case study : designing a hydraulic car lift for small auto repair shops ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics . p. 26-35. Cambridge Scholars Publishing.

Hakim Bouzid, Sylvie Nadeau, Jean-Pierre Kenné. 2010. « Case study : gasket test rig ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics . p. 1-6. Cambridge Scholars Publishing.

Jean-Pierre Kenné, Hakim Bouzid, Sylvie Nadeau. 2010. « Case study : designing a lift truck ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics . p. 132-138. Cambridge Scholars Publishing.

Jean-Pierre Kenné, Hakim Bouzid, Sylvie Nadeau. 2010. « Case study : designing an aerial work platform vehicle ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics . p. 54-60. Cambridge Scholars Publishing.

Jean-Pierre Kenné, Sylvie Nadeau, Hakim Bouzid. 2010. « Case study : automated overhead crane ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics . Cambridge Scholars Publishing.

Sylvie Nadeau, Hakim Bouzid, Jean-Pierre Kenné. 2010. « Case study : designing an airplane baggage belt loader ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics . p. 125-131. Cambridge Scholars Publishing.

Book (11)

2013. « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.

2012. « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.

2011. « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.

2010. « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.

2009. « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.

2008. « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.

2007. « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.

2006. « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.

2005. « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.

2004. « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume Analysis of bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.

2003. « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume Analysis of bolted joints ». New-York, NY, USA : American Society of Mechanical Engineers. 149 p.

Poster (2)

Sylvie Nadeau, Stéphane Hallé, Jean Arteau, B. Ateme-Nguema, A. Badri, Christian Belleau, Hakim Bouzid, M. Debia, B. Emami-Mehrgani, Frédéric Laville, François Morency, Anh Dung Ngô, Yvan Petit, Jérémie Voix. 2013. « Quand la vulgarisation scientifique reprend ses lettres de noblesse: le cas de l'EREST ». Poster presented during a conference : Journée Découverte, École de technologie supérieure ( Montréal, QC, Canada, 13 mars 2013 )

Hakim Bouzid, Nor Eddine Laghzale. 2009. « Analytical modeling of tube-to-tubesheet joints sujected to plasticity and creep ». Poster presented during a conference : 6th CNS International Steam Generator Conference ( Toronto, Canada, Nov. 8-11, 2009 )

Technical report (4)

Hakim A. Bouzid. 2011. « Étude de l'effrondrement d'une échelle à coulisse causant la mort d'un travailleur de l'Église Sacré-Coeur-de-Jésus ». CSST. 43 p.

A. Bouzid. 2011. « ASTM F03 Research project on thermal expansion coefficient of PTFE gasketing materials under high loads ». ASTM International. 39 p.

Hakim Bouzid, Anh Dung Ngo. 2011. « Mesures du coefficient de frottement du plancher en Terrazzo de l'Église Sacré-Coeur-de-Jésus ». CSST. 10 p.

Caroline Duchaine, Marc Veillette, Yvon Cormier, Jacques Lavoie, France Desjardins, Hakim Bouzid. 2003. « Analyse microbiologique des fluides de coupe de métaux : étude exploratoire ». Montréal, Canada. «Études et Recherches» IRSST. 33 p.

Communication (12)

S. Demers, Sylvie Nadeau, Abdel-Hakim Bouzid. 2011. « Une approche analytique pour la modélisation réaliste du mécanisme lésionnel de la hernie discale  ». Communication during a conference : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels ( Montréal, QC, Canada, 10 mars 2011 )

Nor Eddine Laghzale, Hakim Bouzid, A. El Gherrad. 2010. « Étude des effets de l'écrouissage et du fluage sur la pression résiduelle de contact dans les joints tubes-plaques tubulaires ». Communication during a conference : VI ième Journées d'Études Techniques 2010 (JET) ( Marrakech, Maroc, 5-7 mai 2010 )

Mohammed Diany, Hakim Bouzid. 2010. « Caractérisation mécanique des garnitures de presse-étoupe ». Communication during a conference : VI ième Journées d'Études Techniques 2010 (JET) ( Marrakech, Maroc, 5-7 mai 2010 )

Walter Lee, Hakim Bouzid, James Huang. 2009. « Qualification of gasket performance for vacuum applications ». Communication during a conference : VSP Technologies "Sealing Technology Exposition" ( Prince George, VA, USA, Dec. 2, 2009 )

Sébastien Demers, Hakim Bouzid, Sylvie Nadeau. 2009. « Étude du mécanisme lésionnel de la hernie discale : une approche analystique de modélisation de la hernie discale ». Communication during a conference : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels ( Montréal, QC, Canada, 10 déc. 2009 )

Mohammed Diany, Hakim Bouzid. 2009. « Modélisation numérique des garnitures de valves ». Communication during a conference : Colloque International sur les Méthodes Mathématiques et Numériques en Mécaniques des Fluides - CIMMNMF ( Errachidia, Maroc, 28-29 avril 2009 )

Hakim Bouzid, N. Laghzale. 2008. « An analytical solution of hydraulicaly expanded tube-to-tubesheet joints with linear strain hardening material behaviour ». Communication during a conference : Third International Conference on Engineering Failure Analysis (ICEFA-III) ( Barcelona, Spain, July 13-16, 2008 )

W. Lee, Hakim Bouzid, J. Huang. 2008. « Effect of HOBT test parameters on expanded PTFE gaskets ». Communication during a conference : ASME Pressure Vessels and Piping Conference (PVP) ( Chicago, IL, USA, July 27-31, 2008 )

Hakim Bouzid. 2005. « Bolted flanged joint flexibility analysis ». Communication during a conference : PVRC Conference on Best Practices for Flange Assembly and Maintenance (PVRC-WRC) ( New Orleans, LA, USA, May 23-25, 2005 )

O. Morin, Henri Champliaud, F. Duchaine, Hakim Bouzid. 2003. « Krigeage du comportement des joints d'étanchéité au chargement et au déchargement ». Communication during a conference : 71e Congrès de l'ACFAS ( Rimouski, QC, Canada, 19-23 mai 2003 )

A. Bouzid, J. R. Payne. 2000. « FEM Studies at TTRL and ÉTS ». Communication during a conference : ASTM Committee F03 Gaskets Meeting : Technology Session ( Orlando, FL, USA, Oct. 24-26, 2000 )

G .L. Hollinger, K. H. Hsu, J. R. Payne, M. Derenne, A. Bouzid, L. Marchand, R. Mueller, J. Waterland, R. Winter. 1999. « A look at today’s gasket evaluation technology ». Communication during a conference : 1st International Conference on Sealing Technology and Plant Leakage Reduction (ICSTPLRL-99) ( Charlotte, NC, USA, Nov., 1999 )

Non-peer-reviewed article published in a journal or magazine (1)

Anh Dung Ngô, Stéphane Hallé, Sylvie Nadeau, P. Déry, P. Doucet, R. Gilbert, L. Gratton, Jean Arteau, Hakim Bouzid, J. Brousseau, P. Dessureault, F. Gauthier, Frédéric Laville, P. Le Huy, Françoise Marchand, Yvan Petit, D. Rodier, Marc Thomas. 2007. « Le défi de l'intégration des connaissances en santé et en sécurité du travail - génie mécanique ». Travail et Santé. Travail et Santé, vol. 23 , nº 4. p. 36-39.

Award and distinction