Henri Champliaud
Professeur
Département
Département de génie mécanique
Formation
M.Sc.T. (Université d'Orléans), B.Ing. (ÉTS), M.Sc.A. (Université de Sherbrooke), Ph.D. (ÉTS)
Bureau
A-2916
Courriel
Unité de recherche
Axes de recherche
- Matériaux et fabrication
- Énergie
- Aéronautique et aérospatiale
Cours
Encadrements
- En codirection avec :
Génération de maillage structuré par Krigeage avec raffinement elliptique local, par Duchaine,François
Été 2004 - En codirection avec : Lê, Van Ngan
Calcul des contraintes résiduelles dues au soudage par la méthode des éléments finis, par Morin,Olivier
Été 2006 - En codirection avec : Seers, Patrice
Influence de l'utilisation du Biocarburant E85 sur les émissions poluantes d'un véhicule hybrique électrique, par Terrier,Philippe
Hiver 2005 - En codirection avec : LANTEIGNE, JACQUES
Mesure de contraintes résiduelles dues au soudage et au soudage-martelage par micro-profil de surface, par Nasri,Hassan
Été 2007 - En codirection avec : POTVIN, MARIE-JOSEE
Conception d'un panneau solaire de type "membrane" attaché à un micro ou nano-satellite, par Sylvestre,Bruno
Hiver 2008 - En codirection avec : Dupuis, Erick
Conception d'un robot sauteur dédié à l'exploration planétaire et utilisant les fluctuations de température quotidiennes comme source de puissance, par Montminy,Steeve
Été 2006 - En codirection avec : Liu, Zhaoheng
Simulation du comportement en torsion d'un démultiplicateur harmonique par la méthode des éléments finis, par Rhéaume,François Etienne
Automne 2007 - En codirection avec : Liu, Zhaoheng
Finite Element Modeling and Simulation of Roll Bending Process for Forming a Thick Conical Hollow Shape, par Zeng,Jun
Été 2007 - En codirection avec : Lê, Van Ngan
Modélisation par la méthode des éléments finis des distorsions dues au soudage d'un joint en T, par Kassab,Rabih
Automne 2007
- En codirection avec : Lê, Van Ngan
Conception d'un appareil de mesure de tension d'une courroie à trois points de déflexion, par Lajmi,Abdelmajid
Été 2002 - En codirection avec : Masson, Succession Christian
Conception d'un site d'évaluation des performances d'éoliennes hors réseaux en milieu complexe, par Pelletier,Francis
Hiver 2003
- En codirection avec : Lê, Van Ngan
Étude expérimentale et analyse par éléments finis du couple de dévissage des capsules serties sur un contour fileté, par Lajmi,Abdelmajid
Automne 2009
- En codirection avec :
Behaviour Study of Thick Laminated Composites : Experimentation and Finite Element Analyses, par Duchaine,François
Automne 2014 - En codirection avec : Lanteigne, Jacques
Residual stress relaxation during the post-weld heat treatment of 415 martensitic stainless steel : Evaluation and experimental validation, par Hosseini,Mir Mehrdad
Été 2024 - En codirection avec : Gholipour Baradari, Javad
Material modeling for multistage tube hydroforming process simulation, par Saboori,Mehdi
Automne 2014 - En codirection avec : Dao, Thien-My
Asymetrical Roll Bending Process Study : Dynamic Finite Element Modeling and Experiments, par Tran,Hoang Quan
Été 2014 - En codirection avec : Liu, Zhaoheng
Numeral and Experimental Study of a Flexible Robotic Grinding Process, par Tahvilian,Amirmasoud
Automne 2014 - En codirection avec : Wanjara, Priti
Electron Beam Welding Process for Joining Thick Gage Section of Martensitic Stainless Steels, par Sarafan,Sheida
Hiver 2016 - En codirection avec : Lanteigne, Jacques
Modélisation par éléments finis des contraintes résiduelles produites au soudage dans la zone de fusion (410NI-Mo), dans la zone affectée par la chaleur et dans le métal de base (13Cr-4Ni), lors de la transformation de phase martensitique., par Lévesque,Jean-Benoit
Été 2024 - En codirection avec : Pham, Tan
Modélisation électro-magnéto-thermique et optimisation des paramètres de chauffe d'un nouveau système de traitement thermique par induction robotisé, par Gendron,Mathieu
Automne 2017 - En codirection avec : Jahazi, Mohammad
Prédiction de distorsions induites lors du procédé de trempe de brames d’acier de fortes dimensions : modélisation et validation expérimentale, par Bouissa,Yassine
Été 2020 - En codirection avec : Lê, Van Ngan
Conception de réservoir de transformateurs pouvant résister à un arc interne, par Brodeur,Samuel
Hiver 2022 - En codirection avec :
Conception d'un moteur Stirling à piston liquide, par Paradis,Pierre-Yves
Été 2024 - En codirection avec : Paquet, Daniel
Comparaison expérimentale et numérique de l'endommagement par fatigue de la microstructure d'un acier inoxydable martensitique, par Deschênes,Pierre-Antony
Été 2024 - En codirection avec : Jahazi, Mohammad
Accurate Heat Transfer Modelling of the Quenching Hardening, par Salazar Jimenez,Gamaliel
Été 2024 - En codirection avec : Liu, Zhaoheng
A Study on Hot Metal Spinning Process, par Tran,Mai-Van
Été 2024 - En codirection avec : Lê, Van Ngan
Heat Assieted Spinning with the Objective of Optimizing Process of Hard to Shape Aerospace Alloys, par Nguyen,Huy Hoan
Hiver 2024 - En codirection avec : Lanteigne, Jacques
Finite Element Modeling of the Propagation of Cracks in a Turbine Wheel Through a Residual Stress Field, par Bab Nadi,Reza
Été 2024 - En codirection avec : Jahazi, Mohammad
Influence of Initial Microstructure and Heating Rate on Kinetics of Phase Tranformation in a Medium Carbon Low Alloy Steel, par Rajakrishnan,Navneeth
Été 2024 - En codirection avec : Bonev, Ilian
Posture Optimization of a Highly Redundant Robotic Workcell of Two Collaborative Hexapod Robots for Efficient Machining Tasks, par Cianyi,Yannick
Été 2024 - En codirection avec : Jahazi, Mohammad
Numerical Evaluation of Distorsion and Delamination in Cold Spray Deposition, par Seyedein,Moeen
Hiver 2024 - En codirection avec : Bonev, Ilian
Dynamic Analysis and Vibration Control of an Industrial Hexapod for Machining, par Hosseini,Fatemeh
Été 2024
- En codirection avec : Lê, Van Ngan
Effet d'hystérésis de la dilatation thermique sur les contraintes résiduelles dues au soudage., par Amri,Brahim
Été 2008 - En codirection avec : Dao, Thien-My
Modélisation paramétrique du pressage d'aubes de turbines, par Bellizzi,Thibaut
Automne 2007 - En codirection avec : Thomas, Marc
Effet des contraintes résiduelles sur les paramètres modaux des structures soudées, par Charette,Olivier
Automne 2010 - En codirection avec : Lê, Van Ngan
Analyse par éléments finis des contraintes dans les assemblages par frettage, par Martin,Francis
Automne 2011 - En codirection avec : Joncas, Simon
Vacuum Infused Anionic Polyamide-6 Composites : A Quest for Uniformity, par Charron,Jean-François
Hiver 2011 - En codirection avec : Dao, Thien-My
Influences des paramètres du roulage à trois rouleaux asymétriques sur la qualité de la pièce formée, par Salem,Jamel
Automne 2011 - En codirection avec : Liu, Zhaoheng
Modélisation du procédé de meulage sous-marin pour la réfection robotisée de surfaces d'acier, par Thuot,Dominique
Été 2010 - En codirection avec : Verhaegen, Marc
Détecteur multibande LIBS à base de réseaux holographiques épais: Conception optomécanique et gestion de l'innovation, par Gagnon,Daniel
Été 2012 - En codirection avec : Gholipour Baradari, Javad
Experimental process development and aerospace alloy formability studies for hydroforming, par Mojarad Farimani,Saeed
Automne 2013 - En codirection avec : Lanteigne, Jacques
Finite Element Modeling of the Heat Source During Welding of 415 Steel Joints (13%CR-4%NI) with the Robotic FCAW, par Tireh Dast,Matin
Été 2015 - En codirection avec : Lê, Van Ngan
Déformation d'une paroi d'acier sous pression jusqu'à la rupture : essais expérimentaux et simulations numériques, par Brodeur,Samuel
Été 2014 - En codirection avec : Feng, Zhengkun
Élaboration d'un procédé de formage dédié à la fabrication de récupérateurs de chaleur des eaux usées, par Barrière-Morin,Benoit
Hiver 2015 - En codirection avec : Pham, Tan
Optimisation par éléments finis des trajectoires de chauffage par induction pour un traitement thermique robotisé in situ, par Gendron,Mathieu
Été 2013 - En codirection avec : Lanteigne, Jacques
Étude de l'effet du martelage sur la vie en fatigue de l'acier E309L utilisé pour une réparation de turbines 13Cr-4Ni, par Curtat,Jean-Loup
Hiver 2016 - En codirection avec : Gholipour Baradari, Javad
Étude du procédé de mise en forme par application de lignes de chauffe effectuées sur plaques d'acier inoxydable 304L, par Provencher,David
Hiver 2017 - En codirection avec :
Calculation Methodology for Turbine Rotor Fragment Containment, par Jivan,Mihai
Été 2022 - En codirection avec : Lanteigne, Jacques
Étude du comportement au fluage de l'alliage 13Cr-4Ni en vue de simuler la redistribution des contraintes résiduelles lors du traitement thermique post-soudage, par Frechette,Guillaume
Automne 2017 - En codirection avec : Jahazi, Mohammad
Conception d'outillages pour le traitement thermique des composants de trains d'atterrissage en acier, par Delly,Chokri
Automne 2022 - En codirection avec : Jahazi, Mohammad
Finite Element Modeling of the Linear Friction Welding Process, par Bertrand,Samuel
Été 2019 - En codirection avec : Tahan, Antoine
Développement d'outil de balancement pour la compensation de la distorsion dans un train d'atterrissage, par Portet,Baptiste
Automne 2022 - En codirection avec : Jahazi, Mohammad
Développement d'une méthode de caractérisation du transfert de chaleur pour le traitement thermique, par Lemyre-Baron,Jean-Sébastien
Été 2024 - En codirection avec : Jahazi, Mohammad
Évolution de la microstructure lors du traitement thermique de l'acier inoxydable AISI 410, par Devar,Mathieu
Hiver 2021 - En codirection avec : Jahazi, Mohammad
Optimization of the Meshing Parameters for the Sequentially Coupled Thermo-Mechano-Metallurgical Simulation of the Quenching of a Cylindrical Steel Body, par Olvera-Joseph,Daniel
Automne 2023
- En codirection avec : Lê, Van Ngan
Étude par éléments finis de chargements combinés aux états limites, par Larocque,Alexandre
Hiver 2022 - En codirection avec : Francou, Vincent
Outil d'analyse et d'estimation des heures d'ingénierie de projets de centrale hydro-électrique, par Gnablohou,Sêlomé
Hiver 2014
- En codirection avec : Montminy, Steeve
Conception mécanique d'une nacelle pour charges utiles de ballons stratosphériques, par Coache,Vincent
Automne 2013 - En codirection avec :
Développement préliminaire d'un nouveau concept de kit de désorbitation pour petits satellites, par Keryhuel,Alex
Été 2023
- En codirection avec :
Conception d'un système de fixation du groupe motopropulseur et des batteries d'un véhicule thermique converti à une propulsion complètement électrique, par Longhi,Pascal
Été 2016 - En codirection avec : Torrent, François
Optimisation de structure satellitaire, par Gilbert,Carl
Été 2024 - En codirection avec :
Conception d'équipements de production de panneaux solaires, par Gontier,Ivana
Été 2024 - En codirection avec : Jahazi, Mohammad
Validation du modèle numérique simulant les défauts d'interconnection C4 et UBGA à l'assemblage des modules microélectroniques, par Tremblay,David
Été 2024
- En codirection avec :
Modélisation par éléments finis des réservoirs d'huile via ANSYS Workbench, couplé à SAMCEF, par Delacroix,Thomas
Hiver 2017 - En codirection avec :
Analyses thermique et structurale des équipements des unités de craquage catalytique en prenant en compte le comportement des matériaux réfractaires, par Vieillot,Valentin
Hiver 2018 - En codirection avec :
Assurance qualité chez Mayahtt, par Chauvat,Pierre
Été 2020
- En codirection avec :
New Powerplant Analytical Studies, par Delacroix,Thomas
Hiver 2017 - En codirection avec :
Simulation MATLAB du procédé de mise en forme par application de lignes de chauffe, par Vieillot,Valentin
Hiver 2018
- En codirection avec :
Conception et fabrication d'équipements automatisés destinés à la production de panneaux solaires, par Gontier,Ivana
Été 2024
Publications
- Huy Hoan Nguyen, Henri Champliaud, Van Ngan Le. 2024 « Effect of intermediate path on post-wrinkle initiation of the multi-pass metal spinning process: Analysis in the rotating reference frame ». Journal of Manufacturing and Materials Processing vol. 8 , nº 1
- Kanglin Xing, Ilian A. Bonev, Zhaoheng Liu, Henri Champliaud. 2024 « Influence of machining parameters on dynamic errors in a hexapod machining cell ». International Journal of Advanced Manufacturing Technology vol. 131 , nº 3-4. p. 1317-1334
- Kanglin Xing, J. R. R. Mayer, Ilian A. Bonev, Henri Champliaud, Zhaoheng Liu. 2024 « Evaluation of the positioning accuracy along helical paths using a telescoping ballbar ». ASME Letters in Dynamic Systems and Control vol. 4 , nº 1
- Prashant Dhondapure, Pierre Tize Mha, Soumyaranjan Nayak, Lea Ebacher, Simin Dourandish, Henri Champliaud, Jean -Benoit Morin, Mohammad Jahazi. 2023 « Influence of deformation path on the stress state and damage evolution along the central axis of a large size forged ingot of AISI H13 steel ». Journal of Materials Research and Technology vol. 27. p. 8244-8257
- Mahshad Javidikia, Morteza Sadeghifar, Henri Champliaud, Mohammad Jahazi. 2023 « Grain size and temperature evolutions during linear friction welding of Ni-base superalloy Waspaloy: Simulations and experimental validations ». Journal of Advanced Joining Processes vol. 8
- Jean-Benoît Lévesque, Carlo Baillargeon, Daniel Paquet, Jacques Lanteigne, Henri Champliaud. 2023 « Characterizing and modeling transformation-induced plasticity in 13Cr-4Ni welds upon cooling ». Materials vol. 16 , nº 22
- P. A. Deschênes, R. Wheeler, D. Paquet, J. Lanteigne, A. M. Serventi, L. Tôn-Thât, H. Champliaud. 2022 « Micromechanical properties of low-carbon martensitic stainless steel by microtensile experiments ». Materials Science and Engineering: A vol. 858
- Simin Dourandish, Henri Champliaud, Jean -Benoit Morin, Mohammad Jahazi. 2022 « Microstructure-based finite element modeling of a martensitic stainless steel during hot forging ». International Journal of Advanced Manufacturing Technology vol. 123 , nº 7-8. p. 2833-2851
- Minh-Nha Pham, Henri Champliaud, Zhaoheng Liu, Ilian A. Bonev. 2022 « Parameterized finite element modeling and experimental modal testing for vibration analysis of an industrial hexapod for machining ». Mechanism and Machine Theory vol. 167
- Ali Vedaei-Sabegh, Jean-Benoît Morin, Henri Champliaud, Mohammad Jahazi. 2022 « Influence of thermally grown oxides on interfacial friction during hot deformation of large-size forging ingots ». Journal of Materials Research and Technology vol. 21. p. 3412-3424
- Yassine Bouissa, Muftah Zorgani, Davood Shahriari, Henri Champliaud, Jean-Benoît Morin, Mohammad Jahazi. 2021 « Microstructure-based FEM modeling of phase transformation during quenching of large-size steel forgings ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 52 , nº 5. p. 1883-1900
- Samuel Brodeur, Van Ngan Le, Henri Champliaud. 2021 « A nonlinear finite-element analysis tool to prevent rupture of power transformer tank ». Sustainability vol. 13 , nº 3
- P. Y. Paradis, H. Champliaud. 2021 « New correlations for heat transfer in parallel-plate ducts at low Peclet number ». International Journal of Heat and Mass Transfer vol. 178
- Y. Bouissa, N. Bohlooli, D. Shahriari, H. Champliaud, J. B. Morin, M. Jahazi. 2020 « FEM modeling and experimental validation of quench-induced distortions of large size steel forgings ». Journal of Manufacturing Processes vol. 58. p. 592-605
- J. B. Lévesque, J. Lanteigne, H. Champliaud, D. Paquet. 2020 « Modeling solid-state phase transformations of 13Cr-4Ni steels in welding heat-affected zone ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science vol. 51 , nº 3. p. 1208-1220
- Sheida Sarafan, Priti Wanjara, Jean-Benoit Levesque, Javad Gholipour, Henri Champliaud, Louis Mathieu. 2020 « Through-thickness residual stresses, microstructure, and mechanical properties of electron beam-welded CA6NM martensitic stainless steel after postweld heat treatment ». Advances in Materials Science and Engineering vol. 2020
- Yassine Bouissa, Davood Shahriari, Henri Champliaud, Mohammad Jahazi. 2019 « Prediction of heat transfer coefficient during quenching of large size forged blocks using modeling and experimental validation ». Case Studies in Thermal Engineering vol. 13
- A. Fall, H. Monajati, A. Khodabandeh, M. H. Fesharaki, H. Champliaud, M. Jahazi. 2019 « Local mechanical properties, microstructure, and microtexture in friction stir welded Ti-6Al-4V alloy ». Materials Science and Engineering: A vol. 749. p. 166-175
- Mathieu Gendron, Bruce Hazel, Eric Boudreault, Henri Champliaud, Xuan-Tan Pham. 2019 « Coupled thermo-electromagnetic model of a new robotic high-frequency local induction heat treatment system for large steel components ». Applied Thermal Engineering vol. 150. p. 372-385
- Sheida Sarafan, Priti Wanjara, Jean-Benoît Lévesque, Javad Gholipour, Henri Champliaud, Louis Mathieu. 2019 « Residual stresses, microstructure, and mechanical properties of EB-Welded 90-mm-Thick UNS S41500 martensitic stainless steel after PWHT ». Materials Performance and Characterization vol. 8 , nº 4. p. 648-663
- Jean-Loup Curtat, Jacques Lanteigne, Henri Champliaud, Zhaoheng Liu, Jean-Benoît Lévesque. 2017 « Influence of hammer peening on fatigue life of E309L steel used for 13%Cr-4%Ni blade runner repairs ». International Journal of Fatigue vol. 100. p. 68-77
- Mathieu Gendron, Bruce Hazel, Eric Boudreault, Henri Champliaud, Xuan-Tan Pham. 2017 « Modeling circular inductors coupled to a semi-infinite magnetic medium considering the proximity effect ». Journal of Electromagnetic Waves and Applications vol. 31 , nº 13. p. 1232-1254
- Seyedbehzad Ghafarizadeh, Amir Masoud Tahvilian, Jean-François Chatelain, Zhaoheng Liu, Henri Champliaud, Gilbert Lebrun. 2017 « Numerical simulation of ball-end milling with SPH method ». International Journal of Advanced Manufacturing Technology vol. 88 , nº 1. p. 401-408
- Jacques Luk-Cyr, Rayan El-Bawab, Henri Champliaud, Jacques Lanteigne, Aurelian Vadean. 2017 « Sequential approximate optimization of industrial hammer peening using finite element simulations ». Structural and Multidisciplinary Optimization vol. 55 , nº 3. p. 767-778
- Jacques Luk-Cyr, Daniel Paquet, Jacques Lanteigne, Henri Champliaud, Aurelian Vadean. 2017 « A unified plasticity methodology for rate- and temperature-sensitive alloys exhibiting a non-linear kinematic hardening behavior ». Acta Mechanica Solida Sinica vol. 30 , nº 1. p. 27-37
- S. Sarafan, P. Wanjara, J. Gholipour, H. Champliaud, L. Mathieu. 2017 « Mechanical properties of electron beam welds in heavy-section UNS S41500 martensitic stainless steel ». International Journal of Advanced Manufacturing Technology vol. 91 , nº 9/12. p. 4141-4150
- Sheida Sarafan, Priti Wanjara, Javad Gholipour, Henri Champliaud, Louis Mathieu. 2017 « Mehanical properties of electron beam welded joints in thick gage CA6NM stainless steel ». Journal of Materials Engineering and Performance vol. 26 , nº 10. p. 4768-4780
- Mathieu Gendron, Éric Boudreault, Bruce Hazel, Xuan-Tan Pham, Henri Champliaud. 2016 « Non-linear optimization of a new robotic induction process for local heat treatment using thermal finite element analysis ». International Journal of Advanced Manufacturing Technology vol. 84 , nº 5. p. 1013-1029
- Jacques Luk-Cyr, Rayan El-Bawab, Jacques Lanteigne, Henri Champliaud, Aurelian Vadean. 2016 « Mechanical properties of 75% Ar /25% CO2 flux-cored arc welded E309L austenitic stainless steel ». Materials Science and Engineering A vol. 678. p. 197-203
- M. Saboori, H. Champliaud, J. Gholipour, A. Gakwaya, J. Savoie, P. Wanjara. 2016 « Extension of flow stress-strain curves of aerospace alloys after necking ». International Journal of Advanced Manufacturing Technology vol. 83 , nº 1-4. p. 313-323
- M. Saboori, J. Gholipour, H. Champliaud, P. Wanjara, A. Gakwaya, J. Savoie. 2016 « Prediction of burst pressure in multistage tube hydroforming of aerospace alloys ». Journal of Engineering for Gas Turbines and Power vol. 138 , nº 8
- Jamel Salem, Henri Champliaud, Zhengkun Feng, Thien-My Dao. 2016 « Experimental analysis of an asymmetrical three-roll bending process ». International Journal of Advanced Manufacturing Technology vol. 83 , nº 9. p. 1823-1833
- S. Sarafan, J.-B. Lévesque, P. Wanjara, J. Gholipour, H. Champliaud. 2016 « Distortion and residual stresses in electron beam-welded hydroelectric turbine materials ». Science and Technology of Welding and Joining vol. 21 , nº 6. p. 473-478
- S. Sarafan, P. Wanjara, J. Gholipour, H. Champliaud. 2016 « Global and local characteristics of an autogenous single pass electron beam weld in thick gage UNS S41500 steel ». Materials Science and Engineering: A vol. 666. p. 360-371
- Amir Masoud Tahvilian, Bruce Hazel, Farzad Rafieian, Zhaoheng Liu, Henri Champliaud. 2016 « Force model for impact cutting grinding with a flexible robotic tool holder ». International Journal of Advanced Manufacturing Technology vol. 85 , nº 1. p. 133-147
- S. Sarafan, P. Wanjara, Henri Champliaud, D. Thibault. 2015 « Characteristics of an autogenous single pass electron beam weld in thick gage CA6NM steel ». International Journal of Advanced Manufacturing Technology vol. 78 , nº 9. p. 1523-1535
- Amir Masoud Tahvilian, Zhaoheng Liu, Henri Champliaud, Bruce Hazel, Marin Lagacé. 2015 « Characterization of grinding wheel grain topography under different robotic grinding conditions using confocal microscope ». International Journal of Advanced Manufacturing Technology vol. 80 , nº 5. p. 1159-1171
- S. Mojarad, H. Champliaud, J. Gholipour, J. Savoie, P. Wanjara. 2014 « Load path optimization in tube hydroforming ». Canadian Aeronautics and Space Journal = Journal Aéronautique et Spatial du Canada vol. 60 , nº 3. p. 82-89
- M. Saboori, Henri Champliaud, J. Gholipour, A. Gakwaya, J. Savoie, P. Wanjara. 2014 « Evaluating the flow stress of aerospace alloys for tube hydroforming process by free expansion testing ». International Journal of Advanced Manufacturing Technology vol. 72 , nº 9-12. p. 1275-1286
- Quan Hoang Tran, Henri Champliaud, Zhengkun Feng, Thien My Dao. 2014 « FE study for reducing forming forces and flat end areas of cylindrical shapes obtained by the roll-bending process ». Journal of Mechanics Engineering and Automation vol. 4 , nº 6. p. 467-475
- Quan Hoang Tran, Henri Champliaud, Zhengkun Feng, Thien-My Dao. 2014 « Analysis of the asymmetrical roll bending process through dynamic FE simulations and experimental study ». International Journal of Advanced Manufacturing Technology vol. 75 , nº 5-8. p. 1233-1244
- Zhengkun Feng, Henri Champliaud, Michel Sabourin, Sebastien Morin. 2013 « Optimal blank design based on finite element method for blades of large Francis turbines ». Simulation Modelling Practice and Theory vol. 36. p. 11-21
- Amir Masoud Tahvilian, Zhaoheng Liu, Henri Champliaud, Bruce Hazel. 2013 « Experimental and finite element analysis of temperature and energy partition to the workpiece while grinding with a flexible robot ». Journal of Materials Processing Technology vol. 213 , nº 12. p. 2292-2303
- Dominique Thuot, Zhaoheng Liu, Henri Champliaud, Julien Beaudry, Pierre-Luc Richard, Michel Blain. 2013 « Remote robotic underwater grinding system and modeling for rectification of hydroelectric structures ». Robotics and Computer-Integrated Manufacturing vol. 29 , nº 1. p. 86-95
- Quan H. Tran, Henri Champliaud, Zhengkun Feng, Jamel Salem, Thien-My Dao. 2013 « Heat-assisted roll-bending process dynamic simulation ». International Journal of Modelling and Simulation vol. 33 , nº 1. p. 54-62
- Zhengkun Feng, Henri Champliaud. 2012 « Investigation of non-kinematic conical roll bending process with conical rolls ». Simulation Modelling Practice and Theory vol. 27. p. 65-75
- Rabih Kamal Kassab, Henri Champliaud, Van Ngan Lê, Jacques Lanteigne, Marc Thomas. 2012 « Experimental and finite element analysis of a t-joint welding ». Journal of Mechanics Engineering and Automation vol. 2 , nº 7. p. 411-421
- Zhengkun Feng, Henri Champliaud. 2011 « Modeling and simulation of asymmetrical three-roll bending process ». Simulation Modelling Practice and Theory vol. 19 , nº 9. p. 1913-1917
- Zhengkun Feng, Henri Champliaud. 2011 « Three-stage process for improving roll bending quality ». Simulation Modelling Practice and Theory vol. 19 , nº 2. p. 887-898
- A. W. Hulskamp, J. W. Van Wingerden, T. Barlas, Henri Champliaud, G. A. M. Van Kuik, Harald E. N. Bersee, M. Verhaegen. 2011 « Design of a scaled wind turbine with a smart rotor for dynamic load control experiments ». Wind Energy vol. 14 , nº 3. p. 339-354
- Abdelmajid Lajmi, Henri Champliaud, Van Ngan Lê. 2011 « Computation of the maximum torque of a cap liner using a power-law friction and finite element analysis ». Packaging Technology and Science vol. 24 , nº 2. p. 103-121
- Zhengkun Feng, Henri Champliaud, Thien-My Dao. 2009 « Numerical study of non-kinematical conical bending with cylindrical rolls ». Simulation Modelling Practice and Theory vol. 17 , nº 10. p. 1710-1722
- François-Étienne Rhéaume, Henri Champliaud, Zhaoheng Liu. 2009 « Understanding and modelling the torsional stiffness of harmonic drives through finite-element method ». Proceedings of the Institution of Mechanical Engineers, Part C : Journal of Mechanical Engineering Science vol. 223 , nº 2. p. 515-524
- Steeve Montminy, Erick Dupuis, Henri Champliaud. 2008 « Mechanical design of a hopper robot for planetary exploration using SMA as a unique source of power ». Acta Astronautica vol. 62 , nº 6-7. p. 438-452
- Jun Zeng, Zhaoheng Liu, Henri Champliaud. 2008 « FEM dynamic simulation and analysis of the roll-bending process for forming a conical tube ». Journal of Materials Processing Technology vol. 198 , nº 1-3. p. 330-343
- François Duchaine, Henri Champliaud. 2007 « Structured mesh generation by kriging with local refinement with a new elliptic scheme ». Engineering with Computers vol. 23 , nº 1. p. 61-69
- Abdel-Hakim Bouzid, Henri Champliaud. 2004 « Contact stress evaluation of nonlinear gaskets using dual kriging interpolation ». Journal of Pressure Vessel Technology vol. 126 , nº 4. p. 445-450
- Henri Champliaud, N. V. Le. 2003 « Prediction of the leakage pressure of a cap and bottle assembly using the finite element method ». Glass Technology vol. 44 , nº 6. p. 225-230
- Kanglin Xing, Ilian A. Bonev, Zhaoheng Liu, Henri Champliaud. 2023 « Ballbar applications for machining and non-machining setups in a hexapod-based machining cell ». Communication lors de la conférence : Canadian Society for Mechanical Engineering International Congress - Computational Fluid Dynamics Canada International Congress CSME - CFD-SC2023 (Sherbrooke, QC, Canada, May 28-31, 2023)
- Yassine Bouissa, Henri Champliaud, Mohammad Jahazi, Louis-Philippe Lapierre-Boire, Jean-Benoît Morin, Nicolas Poulain. 2017 « Modeling heterogeneities effects on phase transformation during quenching of large size forged steel ingots ». Communication lors de la conférence : 14th U.S. National Congress on Computational Mechanics (USNCCM) (Montreal, QC, Canada, July 17-20, 2017)
- Van Ngan Lê, Henri Champliaud, Françoise Marchand, Patrick Terriault, Jean Arteau. 2010 « Effective learning of buckling of columns in engineering programs ». Communication lors de la conférence : XI International Conference on Engineering and Technology Education (INTERTECH) (Ilheus, Bahia, Brazil, Mar. 7-10, 2010)
- Mehdi Saboori, Henri Champliaud, J. Gholipour Baradari, A. Gakwaya, J. Savoie. 2010 « Analytical evaluation and finite element simulation of material characteristics in tube hydroforming of aerospace alloys ». Communication lors de la conférence : International Conference on Advances in Materials and Processing Technologies (Paris, France, Oct. 24-27, 2010)
- F. Duchaine, Henri Champliaud, O. Morin, Van Ngan Lê. 2003 « Maillage par krigeage de volume par reconnaissance des contours des sections dans un environnement CAD ». Communication lors de la conférence : 71e Congrès de l'ACFAS (Rimouski, QC, Canada, 19-23 mai 2003)
- A. Lajmi, Henri Champliaud, Van Ngan Lê. 2003 « Effet du fluage sur le comportement du joint d'étanchéité dans les fermetures filetées ». Communication lors de la conférence : 71e Congrès de l'ACFAS (Rimouski, QC, Canada, 19-23 mai 2003)
- O. Morin, Henri Champliaud, F. Duchaine, Hakim Bouzid. 2003 « Krigeage du comportement des joints d'étanchéité au chargement et au déchargement ». Communication lors de la conférence : 71e Congrès de l'ACFAS (Rimouski, QC, Canada, 19-23 mai 2003)
- Gamaliel Salazar, Jean-Sébastien Lemyre-Baron, Mohammad Jahazi, Henri Champliaud, Antoine Tahan. 2023 « Analysis of industrial quenching (air transfer + oil immersion) and the cooling regimes after immersion ».
- Huy Hoan Nguyen, Henri Champliaud, Van Ngan Lê. 2020 « Circumferential cracking in conventional metal spinning process ».
- Samuel Bertrand, Davood Shahriari, Mohammad Jahazi, Henri Champliaud. 2018 « Linear friction welding process simulation of Ti-6Al-4V alloy: a heat transfer analysis of the conditioning phase ».
- Henri Champliaud, Valentin Vieillot, David Provencher, Ngan Van Lê. 2018 « Rapid 3D shape forming computation with piecewise heating lines using a fifth order spline formulation ».
- Hoan Huy Nguyen, Henri Champliaud, Van Ngan Lê. 2018 « Dynamic finite element modeling of metal spinning process with a stationary mandrel and a rotating tool ».
- Zhengkun Feng, Henri Champliaud, Louis Mathieu. 2017 « Investigations of a reconfigurable pressing setup for manufacturing blades of large francis turbines runners from very thick plates ».
- Henri Champliaud, Zhengkun Feng, David Provencher, Danick Tousignant, Javad Gholipour. 2016 « Piecewise fifth order spline interpolation for line heating forming process ».
- Zhengkun Feng, Henri Champliaud. 2015 « Modeling and simulation based on finite element method for electron beam welding process ».
- Zhengkun Feng, Henri Champliaud. 2015 « Modeling and simulation for pressing process with reconfigurable punch and die ».
- M. Saboori, J. Gholipour, H. Champliaud, A. Gakwaya, P. Wanjara, J. Savoie. 2015 « Prediction of burst pressure in multi stage tube hydroforming of aerospace alloys ».
- S. Mojarad Farimani, J. Gholipour, Henri Champliaud, J. Savoie, P. Wanjara. 2014 « Numerical and experimental study of preforming stage in tube hydroforming ».
- Zhengkun Feng, Henri Champliaud. 2014 « Analyses of profile radial-axial ring rolling process based on explicit finite element method ».
- Zhengkun Feng, Henri Champliaud. 2014 « FEM analysis of radial-axial profile ring rolling process ».
- Zhengkun Feng, Henri Champliaud. 2014 « Using pyramidal three-roll bending process to improve the quality of seemed cylinders ».
- Van Ngan Lê, Henri Champliaud. 2014 « Safety factor of welded-plate beams based on finite element linear buckling analysis ».
- Sheida Sarafan, Priti Wanjara, Henri Champliaud, Denis Thibault, Louis Mathieu. 2014 « Evaluation of electron beam welded AISI 415 stainless steel ».
- Hoang Quan Tran, Henri Champliaud, Zhengkun Feng, Thien-My Dao. 2014 « Dynamic FE analysis for reducing the flat areas of formed shapes obtained by roll bending process ».
- Zhengkun Feng, Henri Champliaud. 2013 « FEM analysis of mecano-welding process for manufacturing cylinders ».
- Zhengkun Feng, Henri Champliaud. 2013 « Modeling and simulation of hot radial-axial ring rolling process for producing power plant parts ».
- Zhengkun Feng, Henri Champliaud. 2013 « Modelling and simulation of radial ring rolling process based on finite element analyses ».
- Zhengkun Feng, Henri Champliaud, Louis Mathieu, Michel Sabourin. 2013 « Modeling and simulation of optimal blank design and hot pressing process for manufacturing large francis turbines blades from very thick plates ».
- Zhengkun Feng, Henri Champliaud, Louis Mathieu, Michel Sabourin, Van Ngan Lê. 2013 « Investigation of pressing process for large and thick blades of Francis turbines ».
- Mathieu Gendron, Eric Boudreault, Bruce Hazel, Henri Champliaud, Tan Pham. 2013 « Temperature profile optimization in a new robotic local induction heat treatment process ».
- Rabih Kassab, Henri Champliaud, Philippe Bocher, Jacques Lanteigne, Van Ngan Lê. 2013 « Strain variations of AISI 4340 steel undergoing metallurgical transformations during induction hardening heat treatment ».
- Van Ngan Lê, Henri Champliaud. 2013 « Safety factor of beam-column structures based on finite element linear buckling analysis ».
- S. Mojarad Farimani, Henri Champliaud, J. Gholipour, J. Savoie, P. Wanjara. 2013 « Numerical and experimental study of tube hydroforming for aerospace applications ».
- M. Saboori, J. Gholipour, Henri Champliaud, A. Gakwaya, J. Savoie, P. Wanjara. 2013 « Development of an inverse method for material characterization ».
- M. Saboori, J. Gholipour, Henri Champliaud, A. Gakwaya, J. Savoie, P. Wanjara. 2013 « Effect of material model on finite element modeling of aerospace alloys ».
- S. Sarafan, P. Wanjara, Henri Champliaud, L. Mathieu, J. Lanteigne. 2013 « Characteristics of electron beam welded CA6NM ».
- A. M. Tahvilian, Henri Champliaud, Zhaoheng Liu, B. Hazel. 2013 « Study of workpiece temperature distribution in the contact zone during robotic grinding process using finite element analysis ».
- Amir Masoud Tahvilian, Henri Champliaud, Zhaoheng Liu, Bruce Hazel. 2013 « Influence of grit shape and cutting edge of material removal mechanism of a single abrasive in flexible robotic grinding ».
- M. Tahvilian, Henri Champliaud, Zhaoheng Liu, B. Hazel. 2013 « Chop formation analysis of single grit cutting action in robotic grinding processes ».
- H. Champliaud, Van Ngan Lê. 2012 « Beginning learning principles of finite element method with heat conduction ».
- Zhengkun Feng, Henri Champliaud. 2012 « Modeling and simulation of mecano-welding process for cylinders ».
- Zhengkun Feng, Henri Champliaud. 2012 « Numerical simulation of mecano-welding process for cylinder manufacturing ».
- Zhengkun Feng, Henri Champliaud, Michel Sabourin, Sébastien Morin. 2012 « Modeling and simulation based on inverse finite element method for unfolding large and thick blades of Francis turbines ».
- Zhengkun Feng, Henri Champliaud, Michel Sabourin, Sebastien Morin. 2012 « Simulation of blank design for blades of francis turbines ».
- Van Ngan Lê, Henri Champliaud. 2012 « A teaching approach for enhancing structural design aspects in basic engineering courses ».
- Van Ngan Lê, Henri Champliaud. 2012 « Finite element simulations for comparing three manhole designs for horizontal mills ».
- M. Saboori, Henri Champliaud, J. Gholipour, A. Gakwaya, J. Savoie, P. Wanjara. 2012 « Study of true stress-strain curve after necking for application in ductile fracture criteria in tube hydroforming of aerospace material ».
- Hoang Quan Tran, Henri Champliaud, Zhengkun Feng, Thien-My Dao. 2012 « Analytical modeling and Fe simulation for analyzing applied forces during roll bending process ».
- Hoang Quan Tran, Henri Champliaud, Zhengkun Feng, Thien-My Dao. 2012 « Dynamic analysis of a workpiece deformation in the roll bending process by FEM simulation ».
- Zhengkun Feng, Henri Champliaud. 2011 « Modeling and simulation of mecano-welding process for tubular sections ».
- Van Ngan Lê, Henri Champliaud. 2011 « Finite element analysis of spring back strain energy of metal sheet coils ».
- Mehdi Saboori, J. Gholipour, Henri Champliaud, A. Gakwaya, J. Savoie, P. Wanjara. 2011 « Prediction of burst pressure using a decoupled ductile fracture criterion for tube hydroforming of aerospace alloys ».
- Quan Hoang Tran, Henri Champliaud, Zhengkun Feng, Thien-My Dao. 2011 « FE simulation of heat assisted roll bending process for manufacturing large and thick high strength steel axisymmetric parts ».
- O. Charrette, Marc Thomas, Henri Champliaud. 2010 « Effet des contraintes résiduelles de soudage sur les paramètres modaux de plaques minces ».
- Zhengkun Feng, Henri Champliaud. 2010 « Analyses of non-kinematic conical roll bending process with conical rolls ».
- Zhengkun Feng, Henri Champliaud. 2010 « Comparison between numerical simulation and experimentation of roll bending process with three asymmetrical cylindrical rolls ».
- A. W. Hulskamp, Henri Champliaud, J. W. Van Wingerden, T. Barlas, Harald E. N. Bersee, G. A. M. Van Kuik, M. Verhaegen. 2010 « Smart dynamic rotor control : part 1, design of a smart rotor ».
- Rabih Kassab, Henri Champliaud, Jacques Lanteigne, Van Ngan Lê, Marc Thomas. 2010 « Finite element modeling of a welded T-joint ».
- Abdelmajid Lajmi, Henri Champliaud, Van Ngan Lê. 2010 « Pressure and temperature dependent static friction model for an elastomer cap liner based on experiments ».
- Van Ngan Lê, Henri Champliaud. 2010 « Finite element simulation of forces in strips tying metal sheet coils ».
- Van Ngan Lê, Henri Champliaud, Françoise Marchand, Patrick Terriault, Jean Arteau. 2010 « Effective learning of buckling of columns in engineering programs ».
- Henri Champliaud, Zhengkun Feng, Harald E. N. Bersee. 2009 « Three-point bending testing of sandwich beams and finite element comparison ».
- J-F. Charron, J. Teuwen, Simon Joncas, Harald E. N. Bersee, Henri Champliaud. 2009 « Vacuum infused anionic polyamide-6 composites : a comparison study between different mould heating strategies ».
- Zhengkun Feng, Henri Champliaud, Thien-My Dao. 2009 « Three-dimensional finite element analyses for pyramidal three-roll bending process ».
- Zhengkun Feng, Henri Champliaud, Van Ngan Lê, Thien-My Dao. 2009 « Analysis of roll bending processes based on finite element simulation ».
- A. W. Hulskamp, Henri Champliaud, Harald E. N. Bersee. 2009 « Design and analysis of a scaled smart rotor blade for wind turbine load control ».
- Van Ngan Lê, Henri Champliaud, F. Martin, B Amri. 2009 « Rotating bending stresses in shrink-fit assemblies using FEM ».
- Zhengkun Feng, Henri Champliaud, Thien-My Dao. 2008 « Modeling and simulation of conical bending with cylindrical rolls ».
- Zhengkun Feng, Henri Champliaud, Thien-My Dao. 2008 « Simulation analyses of a non-kinematical conical roll bending process with conical rolls ».
- Zhengkun Feng, Henri Champliaud, Thien-My Dao. 2008 « Simulation of a three-stage process for forming a closed cone from a plate ».
- H. N. Nguyen, Van Ngan Lê, Henri Champliaud, F. Martin. 2008 « Waving behaviour of fatigue stress fluctuation in shrink-fit assemblies using 3D finite elements ».
- Thibault Bellizi, Jonathan Boisvert, Henri Champliaud, Thien-My Dao. 2007 « Estimation of the pressing force in blade forming application ».
- O Charette, Henri Champliaud, Marc Thomas. 2007 « FEM calculation of frequencies variation caused by residual stress distribution in welded structures ».
- F. Duchaine, H.E.N. Bersee, Henri Champliaud. 2007 « The influence of the thickness on 3D elastic material properties of unidirectional e-glass/epoxy laminated composites ».
- Zhengkun Feng, Henri Champliaud, Thien-My Dao. 2007 « Modelling and simulation of conical bending process with sliding rolls ».
- Zhengkun Feng, Henri Champliaud, J. Zeng, Thien-My Dao. 2007 « Investigation of influence of sliding of rolls over plate on continuous bending with noncompatible conical rolls ».
- Van Ngan Lê, Henri Champliaud, Brahim Amri. 2007 « A hysteresis approach of thermal expansion effect on residual stresses due to welding ».
- Francis Martin, Van Ngan Lê, Henri Champliaud, Hoa Ngan Nguyen. 2007 « Stress concentration of shrink fit assembly using finite element method ».
- Hassan Nasri, Jacques Lanteigne, Henri Champliaud. 2007 « Usage of the contour method in measuring residual stress in welding and peen-welding applications ».
- H.N. Nguyen, Van Ngan Lê, Henri Champliaud, Francis Martin. 2007 « Stress concentration factor in shrink-fit shaft based on 3-D finite elements ».
- Jian Hua Zhao, Henri Champliaud, Thien-My Dao. 2007 « Simulation of shear spinning process using finite element method ».
- Jian-Hua Zhao, Henri Champliaud, Thien-My Dao. 2007 « Simulation of shear spinning process for pressure vessel components ».
- Jonathan Boisvert, Thibaut Bellizzi, Henri Champliaud, Patrice Seers. 2006 « Print depth prediction in hot forming process with a reconfigurable die ».
- Jonathan Boisvert, Henri Champliaud, Thibaut Bellizzi, Patrice Seers. 2006 « Simulation and optimisation of a reconfigurable discrete die for the hot forming of thick steel plates in hydro power industry ».
- François Duchaine, E.M. Baten, Henri Champliaud, H.E.N. Bersee. 2006 « Comparison of beam theories with finite elemente analysis in three-point bending of thick composites ».
- Steeve Montminy, Erick Dupuis, Henri Champliaud. 2006 « Mechanical design of a hopper robot for planetary exploration using SMA as a unique source of power ».
- F.-É Rhéaume, Henri Champliaud, Zhaoheng Liu. 2006 « Simulating strain wave gearing torsional stiffness using the finite element method ».
- Henri Champliaud, Abdel-Hakim Bouzid. 2005 « Computation of unloading stiffness of nonlinear gaskets using dual kriging interpolation ».
- Henri Champliaud, Abdelmajid Lajmi, Ngan Van Lê. 2005 « Finite element analysis of a three-point belt tension tester ».
- Marie-Josée Potvin, Bruno Sylvestre, Henri Champliaud. 2005 « Development of a small deployable membrane antenna ».
- P. Terrier, P. Seers, H. Champliaud. 2005 « Comparison of emissions and fuel consumption between gasoline and E85 in a simulated hybrid electric vehicle ».
- Marc Thomas, Henri Champliaud. 2005 « Effect of residual stresses on modal parameters of welded structures ».
- Van Ngan Lê, Anh Dung Ngô, Françoise Marchand, Henri Champliaud, F. Packwood. 2004 « Calculating tension force in belts retaining steel rolls by finite elements ».
- Hakim A. Bouzid, Henri Champliaud. 2003 « On the use of dual kriging interpolation for the evaluation of the gasket stress distribution in bolted joints ».
- Henri Champliaud, François Duchaine, Van Ngan Lê. 2003 « Controlling normal direction and thickness of interpolated surfaces of complex thin parts ».
- Henri Champliaud, Abdelmajid Lajmi, Van Ngan Lê. 2003 « Numerical approach of twist-off torque prediction for cap bottle closure ».
- Henri Champliaud, Van Ngan Lê. 2000 « Finite element analysis of crowning sealing caps ».
- Henri Champliaud. 2000 « Analyse par éléments finis du sertissage de capsules d'étanchéité ». 261 p.Thèse de doctorat. Montréal, École de technologie supérieure.