Ali Salah Omar Aweimer, Abdel-Hakim Bouzid.
2019.
« Evaluation of interfacial and permeation leaks in gaskets and compression packing ».
Journal of Nuclear Engineering and Radiation Science.
vol. 5 , nº 1.
Ali Salah Omar Aweimer, Abdel-Hakim Bouzid, Mehdi Kazeminia.
2019.
« Predicting leak rate through valve stem packing in nuclear applications ».
Journal of Nuclear Engineering and Radiation Science.
vol. 5 , nº 1.
Abdel-Hakim Bouzid, Ali Salah Omar Aweimer.
2019.
« On the use of gas flow models to predict leak rates through sheet gasket materials ».
Journal of Pressure Vessel Technology.
vol. 141 , nº 5.
Abdel-Hakim Bouzid, Mohammad Pourreza.
2019.
« Analysis of residual stresses in the transition zone of tube-to-tubesheet joints ».
Journal of Pressure Vessel Technology.
vol. 141 , nº 4.
Valentin Fort, Abdel-Hakim Bouzid, Michel Gratton.
2019.
« Analytical modeling of self-loosening of bolted joints subjected to transverse loading ».
Journal of Pressure Vessel Technology.
vol. 141 , nº 3.
Rahul Palaniappan Kanthabhabha Jeya, Abdel-Hakim Bouzid.
2019.
« Effect of thermal ratcheting on the mechanical properties of Teflon and fiber based gasket materials ».
Journal of Applied Polymer Science.
vol. 136 , nº 13.
9 p.
Abdel-Hakim Bouzid, L.inbo Zhu.
2018.
« A study of neighbouring tube expansion effect on the residual contact pressure of tube-to-tubesheet joints ».
International Journal of Pressure Vessels and Piping.
vol. 165
p. 185-192.
Ibai Coria, Iñigo Morales Martín, Abel-Hakim Bouzid, Iker Heras, Mikel Abasolo.
2018.
« Efficient assembly of bolted joints under external loads using numerical FEM ».
International Journal of Mechanical Sciences.
vol. 142-143
p. 575-582.
Rahul Kanthabhabha Jeya, Abdel-Hakim Bouzid.
2018.
« Compression creep and thermal ratcheting behavior of High Density Polyethylene (HDPE) ».
Polymers.
vol. 10 , nº 2.
Mehdi Kazeminia, Abdel-Hakim Bouzid.
2018.
« Leak prediction through porous compressed packing rings: A comparison study ».
International Journal of Pressure Vessels and Piping.
vol. 166
p. 1-8.
Linbo B. Zhu, Abdel-Hakim Bouzid, Jun Hong, Zaoxiao Zhang.
2018.
« Elastic interaction in bolted flange joints: An analytical model to predict and optimize bolt load ».
Journal of Pressure Vessel Technology.
vol. 140 , nº 4.
p. 10.
Linbo Zhu, Abdel-Hakim Bouzid, Jun Hong.
2018.
« Analytical evaluation of elastic interaction in bolted flange joints ».
International Journal of Pressure Vessels and Piping.
vol. 165
p. 176-184.
M. Daoud, J. F. Chatelain, A. Bouzid.
2017.
« Effect of rake angle-based Johnson-Cook material constants on the prediction of residual stresses and temperatures induced in Al2024-T3 machining ».
International Journal of Mechanical Sciences.
vol. 122
p. 392-404.
Sébastien Demers, Sylvie Nadeau, Abdel-Hakim Bouzid.
2017.
« Analytical evaluation of stresses and displacements of an intervertebral disc ».
Journal of Biomechanical Science and Engineering.
vol. 12 , nº 3.
16 p.
Palaniappan Rahul Kanthabhabha Jeya, Abdel-Hakim Bouzid.
2017.
« Creep and thermal ratcheting characterization of polytetrafluoroethylene-based gasket materials ».
Advanced Materials proceeding.
vol. 2 , nº 10.
p. 609-614.
Mehdi Kazeminia, Hakim Bouzid.
2017.
« Evaluation of leakage through graphite-based compression packing rings ».
Journal of Pressure Vessel Technology.
vol. 139 , nº 1.
Linbo Zhu, Abdel-Hakim Bouzid, Jun Hong.
2017.
« Numerical and experimental study of elastic interaction in bolted flange joints ».
Journal of Pressure Vessel Technology.
vol. 139 , nº 2.
7 p.
Hocine Attoui, Abdel-Hakim Bouzid, Jerry A. Waterland.
2016.
« On the buckling of spiral wound gaskets ».
Journal of Pressure Vessel Technology.
vol. 138 , nº 4.
7 p.
Abdel-Hakim Bouzid, Mehdi Kazeminia.
2016.
« Effect of reverse yielding on the residual contact pressure in tube-to-tubesheet joints ».
Journal of Pressure Vessel Technology.
vol. 138 , nº 6.
9 p.
Abdel-Hakim Bouzid, Nor-Eddine Laghzale.
2016.
« Analytical modeling of tube-to-tubesheet joints subjected to plastic deformation and creep ».
Journal of Advanced Mechanical Design, Systems and Manufacturing.
vol. 10 , nº 4.
13 p.
Abdel-Hakim Bouzid, Abdel-Hamid I. Mourad, Aly El Domiaty.
2016.
« Influence of Bauschinger effect on the residual contact pressure of hydraulically expanded tube-to-tubesheet joints ».
International Journal of Pressure Vessels and Piping.
vol. 146
p. 1-10.
Sébastien Demers, Abdel-Hakim Bouzid, Sylvie Nadeau.
2016.
« Effect of Sharpey's fibers on the stress distribution in the anulus fibrosus of an intervertebral disc subjected to compression ».
International Review on Modelling and Simulations.
vol. 9 , nº 6.
p. 414-426.
Sébastien Demers, Sylvie Nadeau, Abdel-Hakim Bouzid.
2016.
« Anisotropic multishell analytical modeling of an intervertebral disk subjected to axial compression ».
Journal of Biomechanical Engineering.
vol. 138 , nº 4.
10 p.
Noreddine Laghzale, Hakim Bouzid.
2016.
« Analytical modelling of elastic-plastic interference fit joints ».
International Review on Modelling and Simulations.
vol. 9 , nº 3.
p. 191-199.
A. H. Bouzid, A. H. I. Mourad, A. El Domiaty.
2015.
« Impact of Bauschinger effect on the residual contact pressure of hydraulically expanded tube-to-tubesheet joints ».
Procedia Engineering.
vol. 130
p. 176-192.
Hakim Bouzid, S. Benabdallah.
2015.
« Characterization of PTFE-based gaskets at high temperature ».
Journal of Pressure Vessel Technology.
vol. 137 , nº 3.
7 p.
M. Daoud, J. F. Chatelain, A. Bouzid.
2015.
« Effect of rake angle on Johnson-Cook material constants and their impact on cutting process parameters of Al2024-T3 alloy machining simulation ».
International Journal of Advanced Manufacturing Technology.
vol. 81 , nº 9-12.
p. 1987-1997.
M. Daoud, W. Jomaa, J. F. Chatelain, A. Bouzid.
2015.
« A machining-based methodology to identify material constitutive law for finite element simulation ».
International Journal of Advanced Manufacturing Technology.
vol. 77 , nº 9-12.
p. 2019-2033.
Mehdi Kazeminia, Abdel-Hakim Bouzid.
2015.
« Prediction of gas flow in compressible and low permeability porous media ».
Journal of Fluid Science and Technology.
vol. 10 , nº 2.
12 p.
Mehdi Kazeminia, Hakim Bouzid.
2015.
« Stress analysis of packed stuffing-boxes ».
Journal of Pressure Vessel Technology, Transactions of the ASME.
vol. 137 , nº 5.
9 p.
Abdel-Hakim Bouzid.
2014.
« Comparative study of bolt spacing formulas used in bolted joint designs ».
International Journal of Pressure Vessels and Piping.
vol. 120-121 , nº 1.
p. 47-54.
Adbel-Hakim Bouzid.
2014.
« Failure analysis of an aluminium extension portable ladder ».
Materials Sciences and Applications.
vol. 5 , nº 9.
p. 674-684.
Tan Dan Do, Abdel-Hakim Bouzid, Thien-My Dao.
2014.
« Development of a new bolt spacing formula ».
Journal of Pressure Vessel Technology.
vol. 136 , nº 1.
Sébastien Demers, Abdel-Hakim Bouzid, Sylvie Nadeau.
2013.
« On the modeling of an intervertebral disc using a novel large deformation multi-shell approach ».
Journal of Biomechanical Engineering.
vol. 135 , nº 5.
Lotfi Grine, Abdel-Hakim Bouzid.
2013.
« Analytical and experimental studies of liquid and gas leaks through micro and nano-porous gaskets ».
Materials Sciences and Applications.
vol. 4 , nº 8A.
p. 32-44.
Lotfi Grine, Abdel-Hakim Bouzid.
2013.
« Prediction of leak rates through porous gaskets at high temperature ».
Journal of Pressure Vessel Technology.
vol. 135 , nº 2.
Nazim Ould-Brahim, Abdel-Hakim Bouzid, Vladimir Brailovski.
2013.
« On the use of shape memory alloy studs to recover load loss in bolted joints ».
Journal of Pressure Vessel Technology.
vol. 135 , nº 2.
Mohammed Diany, Abdel-Hakim Bouzid.
2012.
« Creep constitutive law of packing materials based on relaxation tests ».
Journal of Tribology.
vol. 134 , nº 1.
8 p.
Tan Dan Do, Hakim Bouzid, Thien-My Dao.
2012.
« On the Use of Theory of Rings on Nonlinear Elastic Foundation to Study the Effect of Bolt Spacing in Bolted Flange Joints ».
Journal of Pressure Vessel Technology.
vol. 134 , nº 6.
8 p.
Natalia Petrova, Abdel-Hakim Bouzid.
2012.
« Deflections of a multipass shell-and-tube heat exchanger bolted joint subjected to nonaxisymmetric thermal loading ».
Journal of Pressure Vessel Technology.
vol. 134 , nº 1.
9 p.
Hakim Bouzid, Hichem Galai.
2011.
« A new approach to model bolted flange joints with full face gaskets ».
Journal of Pressure Vessel Technology.
vol. 133 , nº 2.
7 p.
S. Demers, Sylvie Nadeau, Abdel-Hakim Bouzid.
2011.
« Étude analytique des zones critiques du disque intervertébral L5-S1 soumis à une compression quasi statique ».
Travail et Santé.
vol. 27 , nº 4.
p. 23.
Mohammed Diany, Hakim Bouzid.
2011.
« An experimental-numerical procedure for stuffing box packing characterization and leak tests ».
Journal of Tribology.
vol. 133 , nº 1.
8 p.
Tan Dan Do, Hakim Bouzid, Thien-My Dao.
2011.
« Effect of bolt spacing on the circumferential distribution of the gasket contact stress in bolted flange joints ».
Journal of Pressure Vessel Technology.
vol. 133 , nº 4.
10 p.
Lotfi Grine, Hakim Bouzid.
2011.
« Correlation of gaseous mass leak rates through micro- and nanoporous gaskets ».
Journal of Pressure Vessel Technology.
vol. 133 , nº 2.
6 p.
Lotfi Grine, Hakim Bouzid.
2011.
« Liquid leak predictions in micro- and nanoporous gaskets ».
Journal of Pressure Vessel Technology.
vol. 133 , nº 5.
6 p.
Hakim Bouzid, Akli Nechache.
2010.
« The modelling of bolted flange joints used with disc springs and tube spacers to reduce relaxation ».
International Journal of Pressure Vessels and Piping.
vol. 87 , nº 12.
p. 730-736.
Hichem Galai, Hakim Bouzid.
2010.
« Analytical modeling of flat face flanges with metal-to-metal contact beyond the bolt circle ».
Journal of Pressure Vessel Technology, Transactions of the ASME.
vol. 132 , nº 6.
p. 0612071-0612078.
Nor Eddine Laghzale, Hakim Bouzid.
2010.
« Effect of creep on the residual stresses in tube-to-tubesheet joints ».
Journal of Pressure Vessel Technology, Transactions of the ASME.
vol. 132 , nº 6.
p. 0612101-0612106.
Hakim Bouzid.
2009.
« On the effect of external bending loads in bolted flange joints ».
Journal of Pressure Vessel Technology.
vol. 131 , nº 2.
Mohammed Diany, Hakim Bouzid.
2009.
« Analytical evaluation of stresses and displacements of stuffing-box packing based on a flexibility analysis ».
Tribology International.
vol. 42 , nº 6.
p. 980-986.
Mohammed Diany, Hakim Bouzid.
2009.
« Short term relaxation modeling of valve stem packings ».
Journal of Tribology.
vol. 131 , nº 3.
Nor Eddine Laghzale, Hakim Bouzid.
2009.
« Analytical modeling of hydraulically expanded tube-to-tubesheet joints ».
Journal of Pressure Vessel Technology.
vol. 131 , nº 1.
Nor Eddine Laghzale, Hakim Bouzid.
2009.
« Theoretical analysis of hydraulically expanded tube-to-tubesheet joints with linear strain hardening material behavior ».
Journal of Pressure Vessel Technology.
vol. 131 , nº 6.
Sylvie Nadeau, Hakim Bouzid, David Prud’homme.
2008.
« Étude du mécanisme lésionnel de la hernie discale : modélisation du comportement élastique non linéaire ».
Revue Internationale sur l’Ingénierie des Risques Industriels.
vol. 1 , nº 1.
p. 46-64.
Akli Nechache, Abdel-Hakim Bouzid.
2008.
« On the use of plate theory to evaluate the load relaxation in bolted flanged joints subjected to creep ».
International Journal of Pressure Vessels and Piping.
vol. 85 , nº 7.
p. 486-497.
Akli Nechache, Abdel-Hakim Bouzid.
2008.
« The effect of cylinder and hub creep on the load relaxation in bolted flanged joints ».
Journal of Pressure Vessel Technology.
vol. 130 , nº 3.
p. 031211 (9 p.).
Akli Nechache, Abdel-Hakim Bouzid.
2007.
« Creep analysis of bolted flange joints ».
International Journal of Pressure Vessels and Piping.
vol. 84 , nº 3.
p. 185-194.
A. Bouzid, M. Diany, M. Derenne.
2006.
« Determination of gasket effective width for the ASME proposed flange design rules ».
Welding Research Council Bulletin.
p. 1-43.
O. Sakr, A. Bouzid, M. Derenne.
2006.
« 3D-finite element modelling of bolted flanged joints subjected to external bending loads ».
Welding Research Council Bulletin.
p. 1-56.
O. Sakr, A. Bouzid, M. Derenne.
2006.
« Development of a transducer for measuring gasket contact stress in bolted flanged joints ».
Welding Research Council Bulletin.
p. 57-85.
Hakim Bouzid, A. Nechache.
2005.
« An analytical solution for evaluating gasket stress change in bolted flange connections subjected to high temperature loading ».
Journal of Pressure Vessel Technology.
vol. 127 , nº 4.
p. 414-421.
Hakim Bouzid, A. Nechache.
2005.
« Thermally induced deflections in bolted flanged connections ».
Journal of Pressure Vessel Technology.
vol. 127 , nº 4.
p. 394-401.
Luc Marchand, Michel Derenne, Olivier Sakr, Hakim Bouzid.
2005.
« Long term pressurized graphite gasketed joint tests ».
Welding Research Council Bulletin.
p. 1-14.
Abdel-Hakim Bouzid, Henri Champliaud.
2004.
« Contact stress evaluation of nonlinear gaskets using dual kriging interpolation ».
Journal of Pressure Vessel Technology.
vol. 126 , nº 4.
p. 445-450.
Hakim Bouzid, Michel Derenne.
2004.
« Effect of gasket width and gasket diameter on tightness performance, gasket constants and emissions : an exploratory experimental investigation ».
Welding Research Council Bulletin.
p. 24-38.
Hakim Bouzid, Michel Derenne, Yves Birembaut.
2004.
« Effect of gasket width on tightness performance gasket constants and emissions ».
Welding Research Council Bulletin.
p. 39-50.
Hakim Bouzid, Michel Derenne, Marwan El-Rich.
2004.
« Effect of flange rotation and gasket width on leakage behavior of bolted flanged joints ».
Welding Research Council Bulletin.
p. 1-23.
Hakim Bouzid, Michel Derenne, Luc Marchand.
2003.
« Long duration mechanical performance of PTFE based gasket materials ».
Welding Research Council Bulletin.
p. 12-22.
O. Sakar, A. Bouzid, M. Derenne, L. Marchand, U. Muzzo.
2003.
« Gasketed joint emissions and leakage : WRC Bulletin 484 - August 2003 ».
Welding Research Council, Progress Reports.
vol. 58 , nº 11-12.
36 p.
Olivier Sakr, Hakim Bouzid, Michel Derenne, Luc Marchand.
2003.
« Correlation between PPMV and mass leakage rate of gasketing products ».
Welding Research Council Bulletin.
p. 1-11.
Yves Birembaut, Thierry Ledauphin, Vincent Masi, Hakim Bouzid, Michel Derenne, Pascal Martelli-Garon.
2002.
« Part 1: The effects of bending moments on bolted gasketed joints ».
Welding Research Council Bulletin.
p. 1-17.
Abdel-Hakim Bouzid, Michel Derenne.
2002.
« Analytical modeling of the contact stress with nonlinear gaskets ».
Journal of Pressure Vessel Technology.
vol. 124 , nº 1.
p. 47-53.
Abdel-Hakim Bouzid, Akli Nechache, Warren Brown.
2002.
« The effect of steady state thermal loading on the deflections of a flanged joint with a cover plate ».
Welding Research Council, Progress Reports.
vol. 57 , nº 7-8.
p. 99-108.
Abdel-Hakim Bouzid, Michel Derenne, L. Marchand, J. R. Payne.
2001.
« Service temperature characterization of polytetrafluoroethylene-based gaskets ».
Journal of Testing and Evaluation.
vol. 29 , nº 5.
p. 442-452.
N. Mammeri, d. L. Piron, Hakim A. Bouzid, Michel Derenne, Luc Marchand, Yves Birembaut.
2000.
« Corrosion quantification test for flanges with graphite-based gaskets ».
Materials Performance.
vol. 39 , nº 4.
p. 64-69.
A. Bouzid, A. Chaaban.
1997.
« An accurate method of evaluating relaxation in bolted flanged connections ».
Journal of Pressure Vessel Technology.
vol. 119 , nº 1.
p. 10-17.
A. Bouzid, A. Chaaban, A. Bazergui.
1995.
« Effect of gasket creep-relaxation on the leakage tightness of bolted flanged joints ».
Journal of Pressure Vessel Technology.
vol. 117 , nº 1.
p. 71-78.
A. Bouzid, A. Chaaban.
1993.
« Flanged joint analysis: a simplified method based on elastic interaction ».
Transactions of the Canadian Society for Mechanical Engineering.
vol. 17 , nº 2.
p. 181-196.
Mohamed Esouilem, Abdel-Hakim Bouzid, Sylvie Nadeau.
2019.
« Accident causes involving pressure vessels: A case study analysis with STAMP model ».
Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Dresden, Germany, Feb. 27-Mar. 1, 2019)
Dortmund : GfA-Press.
Mohamed Esouilem, Abdel-Hakim Bouzid, Sylvie Nadeau.
2019.
« Safety and risk management analysis of accidents related to pressure vessels and piping in alberta petrochemical industry from 2008 to 2017 ».
Pressure Vessels and Piping Conference (PVP) 2019 (San Antonio, TX, USA, July 14-19, 2019)
Amal Mouâa, Nor Eddine Laghzale, Abdel-Hakim Bouzid.
2019.
« Elastic-plastic stresses in shrink fit with a solid shaft ».
14th Congress of Mechanics (CMM2019) (Rabat, Morocco, April 16-19, 2019)
EDP Sciences.
Ali Salah Omar Aweimer, Abdel-Hakim Bouzid.
2018.
« Experimental investigation of interfacial and permeation leak rates in sheet gaskets and valve stem packing ».
ASME 2018 Pressure Vessels and Piping Conference (PVP 2018) (Prague, Czech Republic, July 15-20, 2018)
ASME.
Ali Salah Omar Aweimer, Abdel-Hakim Bouzid, Zijian Zhao.
2018.
« Prediction of leak rates through porous materials using analytical and numerical approaches ».
ASME 2018 International Mechanical Engineering Congress and Exposition (Pittsburgh, PA, USA, Nov. 9-15, 2018)
ASME.
A. Bouzid, V. Songmene, J. P. Kenné.
2018.
« Bavures d'usinage et ébavurage : Méthode de sélection des procédés et allocation optimale des machines ».
7th International Metrology Conference – CAFMET 2018 (Marrakech, Maroc, Apr. 09-12, 2018)
p. 294-300.
Comite Africain de Metrologie.
Abdel-Hakim Bouzid, Mohammad Pourreza.
2018.
« Analytical evaluation of residual stresses in the transition zone of expanded tube-to-tubesheet joints ».
ASME 2018 Pressure Vessels and Piping Conference (PVP 2018) (Prague, Czech Republic, July 15-20, 2018)
ASME.
I. Coria, I. Martin, A. H. Bouzid, I. Heras, M. Abasolo.
2018.
« FEM superelement technique applied to oil and gas bolted flange connections ».
24th International Conference on Fluid Sealing, March 7, 2018 - March 8, 2018 (Manchester, United kingdom, March 7-8, 2018)
p. 105-115.
United kingdom : BHR Group Limited.
Ibai Coria, Iñigo Martín, Hakim Bouzid, Iker Heras, Josu Aguirrebeitia.
2018.
« Optimized bolt tightening sequences in bolted joints using superelement FE modeling technique ».
37th International Conference on Ocean, Offshore and Arctic Engineering (Madrid, Spain, June 17-22, 2018)
ASME.
Valentin Fort, Abdel-Hakim Bouzid, Michel Gratton.
2018.
« Analytical modeling of self-loosening of bolted joints ».
ASME 2018 Pressure Vessels and Piping Conference (PVP 2018) (Prague, Czech Republic, July 15-20, 2018)
ASME.
Rahul Palaniappan Kanthabhabha Jeya, Abdel-Hakim Bouzid.
2018.
« Influence of thermal ratcheting on the creep and mechanical properties of High Density Polyethylene (HDPE) ».
ASME 2018 International Mechanical Engineering Congress and Exposition (Pittsburgh, PA, USA, Nov. 9-15, 2018)
ASME.
Linbo Zhu, Yifei Hou, Abdel-Hakim Bouzid, Jun Hong.
2018.
« On the design of contact member surface shape of bolted joints to minimize clamping load loss ».
ASME 2018 Pressure Vessels and Piping Conference (PVP 2018) (Prague, Czech Republic, July 15-20, 2018)
ASME.
Ali Salah Omar Aweimer, Abdel-Hakim Bouzid, Mehdi Kazeminia.
2017.
« Leak rates of gasses through packing seals with different analytical approaches ».
ASME 2017 Pressure Vessels and Piping Conference (PVP 2017) (Waikoloa, HI, USA, July 16-20, 2017)
American Society of Mechanical Engineers (ASME).
Abdel-Hakim Bouzid, Ali Salah Omar Aweimer.
2017.
« On the use of gas flow models to predict leak rates through sheet gasket materials ».
ASME 2017 International Mechanical Engineering Congress and Exposition (Tampa Bay, Fl, USA, Nov. 03-09, 2017)
ASME.
Palaniappan Rahul Kanthabhabha Jeya, Zijan Zhao, Abdel-Hakim Bouzid.
2017.
« HDPE and PVC creep and thermal ratcheting behavior under compression ».
21st International Conference on Composite Materials (Xi'an, China, Aug. 20-25, 2017)
ICCM21.
Rahul Palaniappan Kanthabhabha Jeya, Abdel-Hakim Bouzid.
2017.
« Characterisation of polytetrafluoroethylene and fiber based gaskets under creep and thermal ratcheting ».
ASME 2017 Pressure Vessels and Piping Conference (PVP 2017) (Waikoloa, HI, USA, July 16-20, 2017)
American Society of Mechanical Engineers (ASME).
Rahul Palaniappan Kanthabhabha Jeya, Abdel-Hakim Bouzid.
2017.
« Creep and thermal ratcheting characterization of polytetrafluoroethylene-based gasket materials ».
World Congress on Advances in Structural Engineering an Mechanics (ASEM 17), The 2017 International Conference onSteel and Composite Structures (ICSCS17) (Ilsan (Seoul), Korea, Aug. 28 - Sept. 01, 2017)
IASEM Conferences.
Ali K. Vafadar, Abdel-Hakim Bouzid, Anh Dung Ngô.
2017.
« Effect of material anisotropy on the structural integrity of composite bolted flanged joints ».
ASME 2017 Pressure Vessels and Piping Conference (PVP 2017) (Waikoloa, HI, USA, July 16-20, 2017)
American Society of Mechanical Engineers (ASME).
Pauline Wyckaert, Sylvie Nadeau, Hakim Bouzid.
2017.
« Analysis of risks of pressure vessels ».
Gesellschaft für Arbeitswissenschaft : Soziotechnische Gestaltung des digitalen Wandels – kreativ, innovativ, sinnhaft (Zurich, Suisse, Fev. 15-17, 2017)
GFA Press.
Zijian Zhao, Rahul Palaniappan Kanthabhabha Jeya, Abdel-Hakim Bouzid.
2017.
« Creep modeling of polyvinyl chloride bolted flange joints ».
ASME 2017 International Mechanical Engineering Congress and Exposition (IMECE 2017) (Tampa, FL, USA, Nov. 03-09, 2017)
American Society of Mechanical Engineers.
Linbo Zhu, Abdel-Hakim Bouzid, Jun Hong.
2017.
« Analytical modelling of elastic interaction in bolted flange gasketed joints ».
ASME 2017 Pressure Vessels and Piping Conference (PVP 2017) (Waikoloa, HI, USA, July 16-20, 2017)
American Society of Mechanical Engineers (ASME).
Hocine Attoui, Abdel-Hakim Bouzid.
2016.
« On the equivalent mechanical properties of spiral wound gaskets ».
ASME 2016 Pressure Vessels and Piping Conference (PVP) (Vancouver, BC, Canada, July 17-21, 2016)
American Society of Mechanical Engineers (ASME).
Abdel-Hakim Bouzid, Linbo Zhu.
2016.
« Effect of adjacent tube expansion on the residual contact pressure of tube-to-tubesheet joints ».
ASME 2016 Pressure Vessels and Piping Conference (PVP) (Vancouver, BC, Canada, July 17-21, 2016)
American Society of Mechanical Engineers (ASME).
M. Kazeminia, A. H. Bouzid.
2016.
« Predicting leakage in packed stuffing boxes ».
23rd International Conference on Fluid Sealing 2016 (Manchester, UK, Mar. 2-3, 2016)
p. 45-59.
BHR Group.
Mehdi Kazeminia, Abdel-Hakim Bouzid.
2016.
« Characterization and modeling of time-dependent behaviour of braided packing rings ».
ASME 2016 Pressure Vessels and Piping Conference (PVP) (Vancouver, BC, Canada, July 17-21, 2016)
American Society of Mechanical Engineers (ASME).
Linbo Zhu, Abdel-Hakim Bouzid, Jun Hong.
2016.
« Numerical and experimental study of elastic interaction in bolted flange joints ».
ASME 2016 Pressure Vessels and Piping Conference (PVP) (Vancouver, BC, Canada, July 17-21, 2016)
American Society of Mechanical Engineers (ASME).
Abdel-Hakim Bouzid.
2015.
« Safety and reliability assessment of a miniature steam generator ».
Proceedings 19th Triennial Congress of the International Ergonomics Association (Melbourne, Australia, Aug. 9-14, 2015)
International Ergonomics Association.
Abdel-Hakim Bouzid, Mehdi Kazeminia.
2015.
« Effect of reverse yielding on the residual contact stresses of tube-to-tubesheet joints subjected to hydraulic expansion ».
ASME 2015 Pressure Vessels and Piping Conference (Boston, MA, USA, July 19-23, 2015)
American Society of Mechanical Engineers.
Aly El Domiaty, Abdel-Hamid Mourad, Abdel-Hakim Bouzid.
2015.
« A proposed generalized model for forming limit diagram ».
ASME 2015 Pressure Vessels and Piping Conference (Boston, MA, USA, July 19–23, 2015)
American Society of Mechanical Engineers (ASME).
Mehdi Kazeminia, Abdel-Hakim Bouzid.
2015.
« On the modeling of gas flow through porous compression packings used in valve stuffing-boxes ».
ICONE 2015 - 23rd International Conference on Nuclear Engineering: Nuclear Power - Reliable Global Energy (Makuhari, Chiba, Japan, May 17-21, 2015)
American Society of Mechanical Engineers (ASME).
Mehdi Kazeminia, Abdel-Hakim Bouzid.
2015.
« Prediction of leak rates in porous braided packing rings ».
ASME 2015 Pressure Vessels and Piping Conference. (Boston, MA, USA, July 19-23, 2015)
American Society of Mechanical Engineers.
N. Laghzale, A. Bouzid, A. Elgharad.
2015.
« L’effet de l’interférence sur un assemblage fretté dans le domaine plastique ».
22ème Congrès Français de Mécanique (Lyon, France, 24-28 août 2015)
Association Française de Mécanique.
Hocine Attoui, Hakim Bouzid, Jerry A. Waterland.
2014.
« Buckling and lateral pressures in spiral wound gaskets ».
American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Anaheim, CA, USA, July 20-24, 2014)
American Society of Mechanical Engineers (ASME).
M. Daoud, W. Jomaa, Jean-François Chatelain, Abdel-Hakim Bouzid, Victor Songmene.
2014.
« Identification of material constitutive law constants using machining tests: A response surface methodology based approach ».
2014 International Conference on High Performance and Optimum Design of Structures and Materials, HPSM 2014 which incorporated the Seminar on Optimum Design in Engineering, OPTI 2014 (Ostend, Belgium, June 9-11, 2014)
p. 25-36.
WITPress.
Monzer Daoud, Jean-François Chatelain, Hakim Bouzid.
2014.
« On the effect of Johnson Cook material constants to simulate Al2024-T3 machining using finite element modeling ».
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014)
American Society of Mechanical Engineers (ASME).
Mehdi Kazeminia, Abdel-Hakim Bouzid.
2014.
« Analysis of stresses and strains in packed stuffing-boxes ».
American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Anaheim, CA, USA, July 20-24, 2014)
American Society of Mechanical Engineers (ASME).
Mehdi Kazeminia, Abdel-Hakim Bouzid.
2014.
« Analytical and numerical evaluation of the axial stress distribution of two soft-packed stuffing-box configurations ».
ASME Turbo Expo 2014: Turbine Technical Conference and Exposition (Düsseldorf, Germany, June 16-20, 2014)
p. V03BT25A005.
ASME.
Mehdi Kazeminia, Abdel-Hakim Bouzid.
2014.
« Effect of tapered housing on the axial stress distribution in a stuffing box pack ».
International Conference on Advances in Mechanical and Automation Engineering-MAE 2014 (Rome, Italy, June 7-8, 2014)
p. 20-25.
Santa Barbara, CA, USA : Institute of Research Engineers and Doctors.
Abdel-Hakim Bouzid.
2013.
« Failure investigation of an aluminum extension portable ladder ».
Chancen durch Arbeits-, Produkt- und Systemgestaltung - Zukunftsfähigkeit für Produktions- und Dienstleistungsunternehmen : 27.02. bis 01.03.2013, Krefeld (Krefeld, Germany, Feb. 27-Mar. 1, 2013)
p. 295-300.
Dortmund, Germany : GfA-Press.
Abdel-Hakim Bouzid, Samir Benabdallah.
2013.
« On the hot blow-out characterization of PTFE-based gasket materials ».
American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Paris, France, July 14-18, 2013)
New York, NY, USA : American Society of Mechanical Engineers.
S. Demers, Sylvie Nadeau, Hakim Bouzid.
2013.
« On the use of multishell theory to model herniated discs ».
Dokumentation des 59. Arbeitswissenschaftlichen Kongresses Krefeld 27.02.-01.03.2013 (Krefeld, Germany, Feb. 27-Mar. 1, 2013)
p. 371-374.
Dortmund, Germany : GfA-Press.
Sébastien Demers, Abdel-Hakim Bouzid, Sylvie Nadeau.
2013.
« Développement d'un modèle analytique pour l'étude des contraintes d'un disque intervertebral soumis à une compression axiale ».
CIRI 2013, 3ème Congrès international sur l'ingénierie des risques industriels (Reims, France, 3-5 juil. 2013)
Reims, France : Université de Reims Champagne-Ardenne.
Sébastien Demers, Sylvie Nadeau, Hakim Bouzid.
2013.
« Analytical anisotropic multi-shell model of a simplified intervertebral disc subjected to axial compression ».
ASME 2013 Summer Bioengineering Conference (SBC) (Sunriver, OR, USA, June 26-29, 2013)
New York, NY, USA : American Society of Mechanical Engineers.
Do Tan Dan, Abdel-Hakim Bouzid, Thien-My Dao.
2012.
« On the development of a new bolt spacing formula ».
ASME 2012 Pressure Vessels and Piping Conference, PVP 2012 (Toronto, ON, Canada, July 15-19, 2012)
p. 131-138.
New York, N.Y., USA : American Society of Mechanical Engineers.
S. Demers, Hakim Bouzid, Sylvie Nadeau.
2012.
« Stress analysis of the intervertebral disc using a developed multi-shell model ».
Twelfth Pan American Congress of Applied Mechanics (PACAM XII) (Trinidad, Spain, Jan. 2-6, 2012)
Sébastien Demers, Abdel-Hakim Bouzid, Sylvie Nadeau.
2012.
« Analytical and finite element multi-shell modelling of an intervertebral disc ».
ASME 2012 Pressure Vessels and Piping Conference, PVP 2012 (Toronto, ON, Canada, July 15-19, 2012)
p. 25-36.
New York, N.Y., USA : American Society of Mechanical Engineers.
Lotfi Grine, Abdel-Hakim Bouzid.
2012.
« Prediction of leak rates through porous gaskets at high temperature ».
ASME 2012 Pressure Vessels and Piping Conference, PVP 2012 (Toronto, ON, Canada, July 15-19, 2012)
p. 215-221.
New York, N.Y., USA : American Society of Mechanical Engineers.
Mohammed Diany, Abdel-Hakim Bouzid.
2011.
« Creep constitutive law of packing materials based on relaxation tests ».
ASME Pressure Vessels and Piping Conference (PVP) (Baltimore, Maryland, USA, July 17-21, 2011)
p. 217-225.
ASME.
N. Ould-Brahim, Abdel-Hakim Bouzid, Vladimir Brailovski.
2011.
« Characteristics of a bolted joint with a shape memory alloy stud ».
5th International Conference on Computational Methods and Experiments in Materials Characterisation (MC) (Malta, July 13-15, 2011)
p. 339-347.
United Kingdom : WITPress.
Nazim Ould-Brahim, Abdel-Hakim Bouzid, Vladimir Brailovski.
2011.
« Load recovery of a bolted joint with a shape memory alloy stud ».
ASME Pressure Vessels and Piping Conference (PVP) (Baltimore, Maryland, USA, July 17-21, 2011)
p. 321-328.
ASME.
Sébastien Demers, Hakim A. Bouzid, Sylvie Nadeau.
2010.
« La hernie discale: mieux la comprendre pour mieux la prévenir ».
Congrès AQHSST 2010 (Lévis, QC, Canada, 12-14 mai 2010)
Association québécoise pour l'hygiène, la santé et la sécurité du travail.
Mohammed Diany, Abdel-Hakim Bouzid.
2010.
« An experimental-numerical procedure for stuffing box packing characterization ».
ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference (Bellevue, WA, USA, July 18-22, 2010)
p. 183-189.
ASME.
Tan Dan Do, Hakim Bouzid, Thien-My Dao.
2010.
« On the use of the theory of rings on non-linear elastic foundation to study the effect of bolt spacing in bolted flange joints ».
ASME Pressure Vessel & Piping Conference (PVP) (Bellevue, Washington, July 18-22, 2010)
p. 617-625.
New York, NY, USA : American Society of Mechanical Engineers.
Lotfi Grine, Abdel-Hakim Bouzid.
2010.
« Liquid leak predictions in micro and nano-porous gaskets ».
ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference (Bellevue, WA, USA, July 18-22, 2010)
p. 627-633.
ASME.
Walter Lee, Abdel-Hakim Bouzid, James Huang.
2010.
« Qualification of gasket performance for vacuum applications ».
ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference (Bellevue, WA, USA, July 18-22, 2010)
p. 307-316.
ASME.
Natalia Petrova, Abdel-Hakim Bouzid.
2010.
« Flanged joints of multi-pass shell-and-tube heat exchangers subjected to non-axisymmetric thermal loading ».
ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference (Bellevue, WA, USA, July 18-22, 2010)
p. 221-230.
New York, NY, USA : American Society of Mechanical Engineers.
Hichem Galai, Hakim Bouzid.
2009.
« Analytical modeling of flat face flanges with metal-to-metal contact beyond the bolt circle ».
2009 ASME Pressure Vessels and Piping Conference (PVP) (Prague, Czech republic, July 26-30, 2009)
p. 315-323.
New-York, NY, USA : American Society of Mechanical Engineers.
Lotfi Grine, Hakim Bouzid.
2009.
« Correlation of gaseous mass leak rates through micro and nano-porous gaskets ».
2009 ASME Pressure Vessels and Piping Conference (PVP) (Prague, Czech republic, July 26-30, 2009)
p. 41-47.
New-York, NY, USA : American Society of Mechanical Engineers.
Walter Lee, Hakim Bouzid, James Huang.
2009.
« Factors affecting high temperature relaxation behaviors of expanded PTFE gaskets ».
2009 ASME Pressure Vessels and Piping Conference (PVP) (Prague, Czech republic, July 26- 30, 2009)
p. 223-234.
New-York, NY, USA : American Society of Mechanical Engineers.
A. Fitzgerald Waterland III, Hakim Bouzid.
2009.
« Analysis of the compression behavior of spiral wound gaskets ».
2009 ASME Pressure Vessels and Piping Conference (PVP) (Prague, Czech republic, July 26-30, 2009)
p. 89-97.
New-York, NY, USA : American Society of Mechanical Engineers.
Hakim Bouzid, Akli Nechache.
2008.
« On the use of Belleville washers to reduce relaxation in bolted flange joints ».
ASME Pressure Vessels and Piping Conference (PVP) (Chicago, IL, USA, Jul. 27-31, 2008)
p. 3-10.
New York, NY, USA : American Society of Mechanical Engineers.
Nor Eddine Laghzale, Abdel-Hakim Bouzid.
2008.
« An analytical solution of hydraulically expanded tube-to-tubesheet joints with linear strain hardening material behaviour ».
Proceedings of the ASME Pressure Vessels and Piping Conference (Chicago, IL, USA, July 27-31, 2008)
p. 63-72.
American Society of Mechanical Engineers.
D. Tan Dan, Hakim Bouzid, Thien-My Dao.
2008.
« Effect of bolt spacing on the circumferential distribution of gasket contact stress in bolted flange joints ».
16th International Conference on Nuclear Engineering (ICONE) (Orlando, FL, USA, May 11-15, 2008)
p. 207-216.
New York, NY, USA : American Society of Mechanical Engineers.
Abdel-Hakim Bouzid, Yves Birembaut, Hubert Lejeune.
2007.
« On the effect of external bending loads in bolted flange joints ».
ASME Pressure Vessels and Piping Conference (PVP) (San Antonio, TX, USA, Jul. 22-26, 2007)
p. 115-123.
New York, NY, USA : American Society of Mechanical Engineers.
Mohammed Diany, Hakim Bouzid.
2007.
« Short term relaxation of stuffing box packings ».
ASME Pressure Vessels and Piping Conference (PVP) (San Antonio, TX, USA, Jul. 22-26, 2007)
p. 159-164.
New York, NY, USA : American Society of Mechanical Engineers.
Nor Eddine Laghzale, Hakim Bouzid.
2007.
« Analytical modeling of hydraulically expanded tube-to-tubesheet joints ».
ASME Pressure Vessels and Piping Conference (PVP) (San Antonio, TX, USA, Jul. 22-26, 2007)
p. 233-242.
New York, NY, USA : American Society of Mechanical Engineers.
Sylvie Nadeau, Hakim Bouzid, D. Prud'Homme.
2007.
« Étude du mécanisme lésionnel de la hernie discale : modélisation du comportement élastique non linéaire ».
Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings (Montréal, QC, Canada, 17-19 déc. 2007)
Montréal : École de technologie supérieure.
Sylvie Nadeau, Stéphane Hallé, S. Déry, P. Doucet, R. Gilbert, L. Gratton, Anh Dung Ngô, Jean Arteau, Hakim Bouzid, J. Brousseau, J. Dessureault, F. Gauthier, Frédéric Laville, P. Le-Huy, Françoise Marchand, Yvan Petit, D. Rodier, Marc Thomas.
2007.
« Vers l'intégration de connaissances en santé et sécurité du travail en formation universitaire (génie mécanique) - une collaboration unique ».
24e Congrès de l’Association Internationale de Pédagogie Universitaire (AIPU) (Montréal, QC, Canada, 16-18 mai 2007)
p. 96-100.
Association Internationale de Pédagogie Universitaire (AIPU).
Mohammed Diany, Hakim Bouzid.
2006.
« Evaluation of contact stress in stuffing box packings ».
ASME Pressure Vessels and Piping Conference (PVP) (Vancouver, Canada, Jul. 23-27, 2006)
p. 87-92.
New York, NY, USA : American Society of Mechanical Engineers.
Hakim Bouzid.
2005.
« Bolted flange joints with full face gaskets : an analytical approach based on flexibility ».
ASME Pressure Vessels and Piping Conference (PVP) (Denver, CO, USA, Jul. 17-21, 2005)
p. 29-35.
New York, NY, USA : American Society of Mechanical Engineers.
Henri Champliaud, Abdel-Hakim Bouzid.
2005.
« Computation of unloading stiffness of nonlinear gaskets using dual kriging interpolation ».
Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, Canada, Aug. 1-4, 2005)
p. 127-138.
Montréal, Qué., Canada : École de technologie supérieure.
M. Diany, Hakim Bouzid, M. Derenne.
2005.
« On the validity and limits of the gasket effective width concept ».
ASME Pressure Vessels and Piping Conference (PVP) (Denver, CO, USA, Jul. 17-21, 2005)
p. 15-20.
New York, NY, USA : American Society of Mechanical Engineers.
A. Nechache, Hakim Bouzid.
2005.
« Creep effect of attached structures on bolted flanged joint relaxation ».
ASME Pressure Vessels and Piping Conference (PVP) (Denver, CO, USA, Jul. 17-21, 2005)
p. 207-215.
New York, NY, USA : American Society of Mechanical Engineers.
Hakim A. Bouzid, Mohammed Diany, Michel Derenne.
2004.
« Determination of gasket effective width based on leakage ».
ASME/JSME Pressure Vessels and Piping Conference (PVP) (San Diego, CA, USA, Jul. 25-29, 2004)
p. 105-111.
New York, NY, USA : American Society of Mechanical Engineers.
Hakim A. Bouzid, Akli Nechache.
2004.
« Creep modeling in bolted flange joints ».
2004 ASME/JSME Pressure Vessels and Piping Conference (PVP) (San Diego, CA, USA, Jul. 25-29, 2004)
p. 49-56.
USA : American Society of Mechanical Engineers.
Hichem Galai, Hakim Bouzid.
2004.
« Analytical modeling of bolted flange joints with full face gaskets ».
International Pipeline Conference (Calgary, AB, Canada, Oct. 4-8, 2004)
p. 2731-2737.
Calgary, AB, Canada : American Society of Mechanical Engineers.
Akli Nechache, Hakim A. Bouzid, Van Ngan Le.
2004.
« Analytical modeling of a bolted flange joint subjected to creep relaxation ».
12th International Conference on Nuclear Engineering (ICONE) (Arlington, VA, USA, Apr. 25-29, 2004)
p. 705-712.
New York, NY, USA : American Society of Mechanical Engineers.
D. Prud'homme, Sylvie Nadeau, Hakim Bouzid.
2004.
« Étude de mécanisme lésionnel de la hernie discale : modélisation du comportement viscoélastique ».
72e Congrès de l'ACFAS (Montréal, QC, Canada, 10-12 mai 2004)
Hakim A. Bouzid, Hichem Beghoul.
2003.
« The design of flanges based on flexibility and tightness ».
ASME Pressure Vessels and Piping Conference (PVP) (Cleveland, OH, USA, Jul. 20-24, 2003)
p. 31-38.
New York, NY, USA : American Society of Mechanical Engineers.
Hakim A. Bouzid, Henri Champliaud.
2003.
« On the use of dual kriging interpolation for the evaluation of the gasket stress distribution in bolted joints ».
Pressure Vessels and Piping Conference (PVP) (Cleveland, OH, USA, Jul. 20-24, 2003)
p. 77-83.
USA : American Society of Mechanical Engineers.
Hakim Bouzid, Hichem Beghoul.
2003.
« A new proposed method for the design of bolted joints based on flexibility and tightness ».
10th International Conference on Pressure Vessel Technology (ICPVT-10) (Vienna, Austria, July 7-10, 2003)
p. 293-301.
Österreichische Gesellschaft für Schweißtechnik.
Hakim Bouzid, Van Ngan Lê.
2003.
« Développement de deux séances de laboratoire pour les cours MEC728 et SYS865 ».
Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2001-2002 : Actes (Montréal, QC, Canada, 11 juin 2002)
p. 7-12.
S. Nadeau, H. A. Bouzid, J. P. Kenné.
2003.
« Conception d'un convoyeur à bagages pour le chargement/déchargement des avions ».
Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2002-2003 : Actes (Montréal, QC, Canada, 25 avril 2003)
p. 67-72.
École de technologie supérieure.
Sylvie Nadeau, Hakim Bouzid, Jean-Pierre Kenné.
2003.
« L'enseignement par la méthode des cas en génie mécanique ».
Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2001-2002 : Actes (Montréal, QC, Canada, 11 juin 2002)
p. 13-16.
École de technologie supérieure.
Akli Nechache, Hakim A. Bouzid.
2003.
« The determination of load changes in bolted gasketed joints subjected to elevated temperature ».
ASME Pressure Vessels and Piping Conference (PVP) (Cleveland, OH, USA, Jul. 20-24, 2003)
p. 139-148.
New York, NY, USA : American Society of Mechanical Engineers.
Hakim A. Bouzid, Akli Nechache, Warren Brown.
2002.
« The effect of steady state thermal loading on the deflections of a flanged joint with a cover plate ».
ASME Pressure Vessels and Piping Conference (PVP) (Vancouver, Canada, Aug. 5-9, 2002)
p. 153-162.
New York, NY, USA : American Society of Mechanical Engineers.
Warren Brown, Michel Derenne, Abdel-Hakim Bouzid.
2002.
« Determination of gasket stress levels during thermal transients ».
2002 ASME Prssure Vessels and Piping Conference : Analysis of Bolted Joints (Vancouver, BC, Canada, Aug. 5-9, 2002)
p. 21-28.
Vancouver, BC, Canada : American Society of Mechanical Engineers.
Akli Nechache, Hakim A. Bouzid.
2002.
« The redistribution of load in bolted gasketed joints subjected to steady state thermal loading ».
10th International Conference on Nuclear Engineering (ICONE) (Arlington, VA, USA, Apr. 14-18, 2002)
p. 743-751.
New York, NY, USA : American Society of Mechanical Engineers.
W. Brown, M. Derenne, A. Bouzid.
2001.
« The effect of thermal loading of pressure vessel joints ».
Journées d'Etudes Européennes sur les Equipements sous Pression: Paris, 23, 24, 25 octobre 2001, Hôtel Sofitel, Forum Rive Gauche = European Symposium on Pressure Equipment - ESOPE 2001 (Paris, France, Oct. 23-25, 2001)
p. 416-425.
Paris, France : Association Française des Ingénieurs en Appareils à Pression.
Warren Brown, Michel Derenne, Hakim A. Bouzid.
2001.
« Determination of gasket stress levels during high temperature flange operation ».
ASME Pressure Vessels and Piping Conference (PVP) (Atlanta, GA, USA, Jul. 22-26, 2001)
p. 361-368.
New York, NY, USA : American Society of Mechanical Engineers.
Warren Brown, Michel Derenne, Hakim A. Bouzid.
2001.
« Determination of the mechanical and thermal properties of selected gasket types ».
ASME Pressure Vessels and Piping Conference (PVP) (Atlanta, GA, USA, Jul. 22-26, 2001)
p. 35-43.
New York, NY, USA : American Society of Mechanical Engineers.
Abdel-Hakim Bouzid, M. Derenne, L. Marchand, J. R. Payne.
2000.
« Preventing PTFE Gasket Blow-Out ».
Proceedings of the Ninth International Conference on Pressure Vessel Technology ICPVT-9 (Sydney, Australia, )
p. 393-401.
W. Brown, Michel Derenne, Abdel-Hakim Bouzid.
2000.
« Determination of the Steady State Operating Temperature of Pressure Vessel Flange Components: Part 2 - Simplified Methods ».
Proceedings of the 2000 ASME/PVP Conference (Seattle, WA, USA, )
p. 105-113.
Warren Brown, Michel Derenne, Abdel-Hakim Bouzid.
2000.
« Determination of the steady state operating temperature of pressure vessel flange components: part 1 - analytic methods ».
Proceedings of the 2000 ASME/PVP Conference (Seattle, WA, USA, July 23-27, 2000)
p. 95-104.
American Society of Mechanical Engineers.
M. Derenne, L. Marchand, Abdel-Hakim Bouzid, J. R. Payne.
2000.
« Long Term Elevated Temperature Performance of Reinforced Flexible Graphite Sheet Gaskets ».
Proceedings of the Ninth International Conference on Pressure Vessel Technology ICPVT-9 (Sydney, Australia, )
p. 229-247.
O. Sakr, Abdel-Hakim Bouzid, M. Derenne, L. Marchand, J. R. Payne.
2000.
« Correlation Between PPMV and Mass Leakage Rate of Gasketing Products ».
Proceedings of the Ninth International Conference on Pressure Vessel Technology ICPVT-9 (Sydney, Australia, )
p. 369-381.