Publications

2014

Louhichi, B., and Rivest, L. Maintaining consistency between CAD elements in collaborative design using association management and propagation,Computers in Industry,65,1,124-135,2014,Elsevier  

2013

Bricogne, M., Troussier, N., Rivest, L., and Eynard, B. Agile Design Methods for Mechatronics System Integration,Product Lifecycle Management for Society, 458-470,2013,Springer Berlin Heidelberg      

Brière-Côté, A., Rivest, L., and Maranzana, R. 3D CAD Model Comparison: An Evaluation of Model Difference Identification Technologies, Computer-Aided Design and Applications,10,2,173-195,2013,Taylor & Francis.

Lapalme, J. and de Guerre, D. An Open Socio-Technical Systems Approach to Enterprise Architecture in Systems Thinking in Enterprise Architecture, J. Gøtze and A. Jensen-Waud Eds.,College Publications, 2013

Lapalme, J. and de Guerre, D. Enterprise-in-Environment Adaptation: Enterprise Architecture and Complexity Management in A Systemic Perspective to Managing Complexity with Enterprise Architecture, P. Saha Ed, IGI-Global, 2013

Lapalme, J., and Conklin, J. “Combining Process Consultation and Structural Interventions”, in Systems Research and Behavioral Science, pre-print, 2013

Ouhimmou M., Haddad S., Favreau J., Lacroix S., Decision support system for forest resources allocation and harvesting optimization in multiusers context, 15th Symposium for Systems Analysis in Forest Resources, SSAFR, Québec, Canada, August 21-23, 2013.

Ouhimmou M., Haddad S., Favreau J., Lacroix S., Optimizing Forest resources allocation and harvesting using clustering techniques,, International Conference on Information Systems, Logistics and Supply Chain (ILS 2013), Morocco, Ocotber 28-30, 2013.

Ouhimmou M., Robust Network Design for Forest Biorefinery Value Chain – An overview, 2nd Forest Biomass Workshop, FPInnovations, Montreal, April 9-10, 2013.

2012

Bricogne, M., Rivest, L., Troussier, N., and Eynard, B. Towards PLM for mechatronics system design using concurrent software versioning principles, Product Lifecycle Management. Towards Knowledge-Rich Enterprises, 339-348, 2012, Springer.       

Brière-Côté, A., Rivest, L., and Maranzana, R. Comparing 3D CAD Models: Uses, Methods, Tools and Perspectives,Computer-Aided Design and Applications,9,6,771-794,2012,Taylor & Francis     

Brière-Côté, A., Rivest, L., and Maranzana, R. Integration of Explicit Geometric Constraints in the Comparison of 3D CAD Models for Part Design Reuse,Product Lifecycle Management. Towards Knowledge-Rich Enterprises,,,445-457,2012,Springer         

El Hani, M., Rivest, L., Maranzana, R. Product data reuse in product development: A practitioner’s perspective, Product Lifecycle Management. Towards Knowledge-Rich Enterprises, 243-256,2012,Springer Berlin Heidelberg      

Lapalme, J. “Three Schools of Thought on Enterprise Architecture”, IT Professional, vol. 14, no. 6, pp. 37-43, 2012

Lapalme, J. and de Guerre, D. “Can a Re-Discovery of Open Socio-Technical Systems Strengthen EA?”, in Journal of Enterprise Architecture, Fev 2012

Louhichi, B., and Rivest, L. Management of Associations within Digital Mock-Ups for Improved Collaboration,Product Lifecycle Management. Towards Knowledge-Rich Enterprises,,,411-423,2012,Springer      

Ouhimmou M., Pulkki, R., NSERC strategic Network on Value Chain Optimization – Optimizing the Forest Bioeconomy, PAC meeting- FPInnovations, Ottawa, February 3-4, 2012.

Ouhimmou M., S. Lacroix, and Blouin M., Harvest selection area and wood allocation optimization, Workshop in Value Maximization, FPInnovations and Canadian Wood Fiber Center, Montreal, May 31st, 2012.

Quintana, V.,  Rivest, L., and Pellerin, R. Measuring and improving the process of engineering change orders in a model–based definition context, International Journal of Product Lifecycle Management,6,2,138-160,2012,Inderscience      

Quintana, V.,  Rivest, L., Pellerin, R., Venne, F., and Kheddouci, F. Re-engineering the Engineering Change Management process for a drawing-less environment,Computers in Industry,63,1,79-90,2012,Elsevier

Rivest, Louis., Bouras, A., and Louhichi, B. Product Lifecycle Management. Towards Knowledge-Rich Enterprises: IFIP WG 5.1 International Conference, PLM 2012, Montreal, QC, Canada, July 9-11, 2012, Revised Selected Papers, 2012,Springer       

2011

Bricogne, M., Troussier, N., Rivest, L., and Eynard, B. PLM perspectives in mechatronic systems design,Competitive and Sustainable Manufacturing Products And Services, 2011.       

Brière-Côté, A., Rivest, L., and Maranzana, R. A Three-Step Approach to Structuring 3D CAD Model Comparison Scenarios,Proceedings of the 8th International Conference on Product Lifecycle Management, Eindhoven, The Netherlands, 2011,

Lemieux S., D'Amours S., Bouchard M., Ouhimmou  M., LogiLab: A New Paradigm to Optimize Forest Supply Chains, Optimization days, Montreal, 2 - 4 May 2011

Ouhimmou M., Hardwood Value chain mapping and optimization, Workshop in Value Chain Optimization, FPInnovations, Vancouver, October 12-13, 2011.

Ouhimmou M., Raulier F., Fortin M., D’Amours S., Optimizing Timber Harvest Levels Under Uncertain Forest Growth Forecasts Using Robust Optimization Approaches, 14th Symposium for Systems Analysis in Forest Resources, SSAFR, Maitencillo, Chili, March 8-11, 2011.

Ouhimmou M., Raulier F., Fortin M., D’Amours S., Propagation des erreurs prévisionnelles dans le calcul de possibilité forestière (CPF) optimisé : approche par programmation robuste, Carrefour Innovation forêt, Québec, October 6, 2011.

Ouhimmou M., The Value Chain Optimization Network research program – Optimizing the Forest Bioeconomy NSERC Strategic Forest Sector R&D Networks Symposium, National Arts Centre, Ottawa October 18-19, 2011,

2010

Bouchard M., Ouhimmou M., Nourelfath M., Robust network design under demand uncertainty, International Conference on Information Systems, Logistics and Supply Chain (ILS 2010), Casablanca, April 14-16, 2010.

Brière-Côté, A., Rivest, L., and Desrochers, A. Adaptive generic product structure modelling for design reuse in engineer-to-order products, Computers in Industry,61,1,53-65,2010,Elsevier    

Demoly, F., Monticolo, D.,  Eynard, B., Rivest, L., and Gomes, S. Multiple viewpoint modelling framework enabling integrated product–process design, International Journal on Interactive Design and Manufacturing (IJIDeM),4,4,269-280,2010,Springer       

Demoly, F., Gomes, S., Eynard, B., and Rivest, L. PLM-based approach for Assembly Process Engineering,International Journal of Manufacturing Research,5,4,413-428,2010,Inderscience Publishers         

Kheddouci, F., Rivest, L., and Fortin, C. Towards long term archiving of 3D annotated models: a sneak peek to a potential solution, Integrated Design and Manufacturing in Mechanical Engineering–IDMME–Virtual Concept, Bordeaux, France,,,,2010,

Malkoun, J., Gardoni, M., and Rivest, L. The Main Elements Brought by MOKA (KBE Method) to Promote an Accelerated Technology Transfer Process Between Aerospace and Automotive Industries,ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference,,,1221-1230,2010,American Society of Mechanical Engineers         

Ouhimmou M., Raulier F., Fortin M., D’Amours S., Robust optimization approach to consider tree growth model uncertainty in forest strategic planning, International Conference on Information Systems, Logistics and Supply Chain (ILS 2010), Casablanca, April 14-16, 2010.

Quintana, V.,  Rivest, L., Pellerin, R., Venne, F., and Kheddouci, F. Will Model-based Definition replace engineering drawings throughout the product lifecycle? A global perspective from aerospace industry, Computers in Industry,61,5,497-508,2010,Elsevier    

Venne, F., Rivest, L., and Desrochers, A. Assessment of 3D Annotation Tools as a Substitute for 2D Traditional Engineering Drawings in Aerospace Product Development, Computer-Aided Design and Applications,7,4,547-563,2010,Taylor & Francis

2009

Bernard, A., Rivest, L., and Dutta, D. Product Lifecycle Management for Society: 10th IFIP WG 5.1 International Conference, PLM 2013, Nantes, France, July 6-10, 2013, Proceedings, 2013, Springer Berlin Heidelberg       

Demoly, F., Gomes, S., Eynard, B., Rivest, L., and Sagot, J-C. Assembly-oriented product structure based on preliminary assembly process engineering,DS 58-7: Proceedings of ICED 09, the 17th International Conference on Engineering Design, Vol. 7, Design for X/Design to X, Palo Alto, CA, USA, 24.-27.08. 2009.

Ouhimmou, M., D’Amours, S., Ait-Kadi, D., Beauregard, R., and Singh Chauhan S., Optimization helps Shermag Gain Competitive Edge, INTERFACES, 2009, Volume 36, Issue .4, pages .314-325.

2008

Bouikni, N., Rivest, L., and Desrochers, A. A multiple views management system for concurrent engineering and PLM, Concurrent Engineering,16,1,61-72,2008,Sage Publications

Ouhimmou M., D'Amours S., Aït-Kadi D., Beauregard R., and Singh Chauhan S., Optimization helps Shermag gain competitive edge, SCRO/Journées de l’optimisation 2008, Ville de Québec, Canada, 12-14 mai 2008.

Ouhimmou M., D'Amours S., Aït-Kadi D., Beauregard R., and Singh Chauhan S., Réduction des coûts d'opération dans la chaîne logistique de Shermag grâce à l'optimisation, Innomeuble, Drummondville, 04 décembre 2008.

Ouhimmou, M., D’Amours, S., Ait-Kadi, D., Beauregard, R., and Singh Chauhan S., Furniture Supply Chain Tactical Planning Optimization Using a Time Decomposition Approach, European Journal of operational Research(EJOR), Volume 189, Issue 3, 16 September 2008, Pages 952-970.

2007

Bouchriha, H., Ouhimmou, M., and D’Amours, S., Lot Sizing Problem on a Paper Machine Under a Cyclic Production Approach, International Journal of Production Economics, Volume 105, Issue 2, 2007, Pages 318-328.

Lamarche, B., and Rivest, L. Dynamic product modeling with inter-features associations: Comparing customization and automation, Computer-Aided Design and Applications,4,6,877-886,2007,Taylor & Francis          

Msaaf, O., Maranzana, R., and Rivest, L. Part data mining for information re-use in a PLM context,ASME Turbo Expo 2007: Power for Land, Sea, and Air,,,187-194,2007,American Society of Mechanical Engineers

Ouhimmou M., D'Amours S., Aït-Kadi D., Beauregard R., and Singh Chauhan S., Optimization helps Shermag Gain Competitive Edge, CORS Canadian Operational Research Society Conference, Best paper in practice of operations research, May 2007.

Ouhimmou M., D'Amours S., Aït-Kadi D., Beauregard R., and Singh Chauhan S., Hardwood supply chain tactical planning in a furniture company using a time decomposition, INFORMS Annual Meeting, Seattle, U.S.A, 3-7 November 2007.

2006

Bouikni, N., Desrochers, A., and Rivest, L. A product feature evolution validation model for engineering change management, Journal of computing and information science in engineering,6,2,188-195,2006,American Society of Mechanical Engineers       

El Hani, M., Rivest, L., and Fortin, C. On specifying an information management tool to support manufacturing process planning in aerospace: A case study, ASME 2006 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 143-151, 2006, American Society of Mechanical Engineers       

Ouhimmou, M., D’Amours, S., Ait-Kadi, D., Beauregard, R., and Singh Chauhan S., Optimizing Supply Chain Tactical Planning Using Bender’s Decomposition and Cross Decomposition Methods, EURO XXI, Iceland, 2-5 juillet 2006.

Ouhimmou, M., D’Amours, S., Ait-Kadi, D., Beauregard, R., and Singh Chauhan S., Optimizing Supply Chain Using Bender’s Decomposition and Cross Decomposition Methods: preliminary results, CORS 2006, Montreal, 8-10 mai 2006.

Tremblay, T., Rivest, L., Msaaf, O., and Maranzana, R. The role of associations in CAD and PLM for handling change propagation during product development, Proceedings of the 2006 conference on Leading the Web in Concurrent Engineering: Next Generation Concurrent Engineering, 507-514, 2006, IOS Press 

2005

Ouhimmou, M., D’Amours, S., Ait-Kadi, D., Beauregard, R., and Singh Chauhan S., Furniture Supply Chain Tactical Planning Optimization Using a Time Decomposition Approach, CORS 2005, Halifax, 16-18 mai 2005.

2004

Fortin, É., Chatelain, J-F., and Rivest, L. An innovative software architecture to improve information flow from CAM to CNC, Computers & Industrial Engineering,46,4,655-667,2004,Pergamon       

Fortin, É., Chatelain, J-F., and Rivest, L. A multi languages approach to open architecture CNC controllers programming,Transactions of the Canadian Society for Mechanical Engineering,28,3,511-530,2004,   

2003

Giguere, F., Rivest, L., and Desrochers, A. Improving design productivity and product data consistency,Feature Based Product Life-Cycle Modelling,,,77-91,2003,Springer US 

2002

Rivest, L. Computer-Aided Design of Aerospace Components Tools and Implementation,2002 ASEE Annual Conference & Exposition: Vive L'ingenieur!, 2002,         

2001

Fortin, É., Chatelain, J-F., and Rivest, L. Improving information flow from CAM to CNC: An innovative architecture based on BNCL virtual machine,Computer & Industrial Engineering International Conference (29th ICC&IE), Montreal, Canada,,,,2001,       

Giguere, F., Rivest, L., and Desrochers, A. Improving Design Productivity and Product Data Consistency,Proceedings of the IFIP TC5/WG5. 2 & WG5. 3 Conference on Feature Modelling and Advanced Design-for-the-Life-Cycle Systems: Feature Based Product Life-Cycle Modelling,,,77-92,2001,Kluwer, BV  

2000

Eustache, J., Maranzana, R., Rivest, L., Lanuel, Y., and Gardan, Y. Gestion de la complexité dans les systèmes de CAO: l'exemple de Bombardier Aéronautique,International exhibition and conferences dedicated to CAD/CAM/CAE and new technologies for design and manufacturing,,,179-186,2000,